[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:xorg-x11-xinit.spec" at Wed Feb 4 12:28:18 UTC 2015. [ 0s] [ 0s] Building xorg-x11-xinit for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '2f3d4fd445f421cd69fb1e96823b931d' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:xorg-x11-xinit.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:xorg-x11-xinit.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:xorg-x11-xinit.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 0s] [9/57] preinstalling diffutils... [ 0s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 1s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: dbus -> dbus-libs [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 7s] booting kvm ... [ 7s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 6 [ 17s] doing fast boot [ 18s] Creating device nodes with udev [ 21s] Waiting for device /dev/vda to appear: ok [ 21s] fsck from util-linux 2.21.2 [ 21s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 21s] /dev/vda: clean, 4708/2392064 files, 237725/9568256 blocks [ 21s] fsck succeeded. Mounting root device read-write. [ 21s] Mounting root /dev/vda [ 21s] mount -o rw -t ext4 /dev/vda /root [ 28s] replacing /etc/mtab with symlink to /proc/self/mounts [ 35s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 75s] 2nd stage started in virtual machine [ 75s] machine type: armv7l [ 75s] switching personality to 8... [ 76s] 2nd stage started in virtual machine [ 76s] machine type: armv7l [ 76s] /.build/build: line 770: mount: command not found [ 76s] swapon on /dev/vdb [ 76s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 76s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 78s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 80s] logging output to //.build.log... [ 80s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-xinit.spec ... [ 81s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-xinit.spec build rpmlint-Factory ... [ 116s] running rpm-x86-arm postinstall script [ 118s] running rpm-libs-x86-arm postinstall script [ 121s] running tizen-accelerator postinstall script [ 127s] running bash-x86-arm postinstall script [ 127s] initializing rpm db... [ 139s] [1/155] installing cross-armv7l-platformfile-0.0.1-3.1 [ 140s] [2/155] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 141s] [3/155] installing libX11-common-1.5.0-3.1 [ 141s] [4/155] installing tizen-release-2.2.0-3.1 [ 142s] [5/155] installing tzdata-2013h-3.1 [ 143s] [6/155] installing libgcc-4.6.4-3.14 [ 146s] [7/155] installing setup-0.1-3.1 [ 148s] [8/155] installing filesystem-0.1-3.1 [ 151s] warning: group lock does not exist - using root [ 151s] [9/155] installing eglibc-2.13-3.9 [ 153s] [10/155] installing libstdc++-4.6.4-3.14 [ 154s] [11/155] installing eglibc-common-2.13-3.9 [ 165s] [12/155] installing libstdc++-devel-4.6.4-3.14 [ 167s] [13/155] installing bash-4.1-3.1 [ 169s] [14/155] installing bzip2-libs-1.0.5-3.2 [ 171s] [15/155] installing cpio-2.8-3.1 [ 171s] [16/155] installing diffutils-3.0-3.1 [ 174s] [17/155] installing e2fsprogs-libs-1.41.9-3.1 [ 174s] [18/155] installing elfutils-libelf-0.152-3.8 [ 175s] [19/155] installing expat-2.0.1-3.2 [ 175s] [20/155] installing fdupes-1.40-3.1 [ 175s] [21/155] installing findutils-4.2.31-3.1 [ 175s] [22/155] installing gdbm-1.8.3-3.3 [ 176s] [23/155] installing libXau-1.0.7-3.1 [ 176s] [24/155] installing libattr-2.4.44-3.4 [ 176s] [25/155] installing libgomp-4.6.4-3.14 [ 177s] [26/155] installing liblua-5.1.4-3.2 [ 177s] [27/155] installing libuuid-2.20.2-3.1 [ 177s] [28/155] installing lzo-2.03-3.3 [ 177s] [29/155] installing m4-1.4.14-3.1 [ 178s] [30/155] installing net-tools-1.60-3.1 [ 178s] [31/155] installing nspr-4.9-3.6 [ 178s] [32/155] installing nss-softokn-freebl-3.12.9-3.11 [ 178s] [33/155] installing patch-2.6-3.1 [ 179s] [34/155] installing pkg-config-0.25-2.2 [ 179s] [35/155] installing popt-1.16-3.2 [ 179s] [36/155] installing readline-5.2-3.2 [ 179s] [37/155] installing sed-4.1.5-3.1 [ 179s] [38/155] installing smack-1.0+s14-3.2 [ 179s] [39/155] installing sqlite-3.7.13-3.2 [ 180s] [40/155] installing tar-1.17-3.2 [ 180s] [41/155] installing xz-libs-5.0.3-3.3 [ 180s] [42/155] installing zlib-1.2.5-3.8 [ 180s] [43/155] installing gmp-4.2.1-3.2 [ 180s] [44/155] installing libpcre-7.7-3.3 [ 180s] [45/155] installing ncurses-libs-5.7-3.2 [ 180s] [46/155] installing build-compare-2009.10.14-3.5 [ 180s] [47/155] installing libpthread-stubs-0.3-3.1 [ 180s] [48/155] installing qemu.x86_64-1.2-5.1 [ 183s] [49/155] installing xorg-x11-proto-core-7.0.25-3.1 [ 183s] [50/155] installing xorg-x11-proto-kb-1.0.6-3.1 [ 184s] [51/155] installing xorg-x11-xutils-dev-7.7-3.1 [ 184s] [52/155] installing eglibc-headers-2.13-3.9 [ 184s] [53/155] installing libcap-2.21-3.2 [ 185s] [54/155] installing unzip-6.0-3.4 [ 185s] [55/155] installing zlib-devel-1.2.5-3.8 [ 186s] [56/155] installing grep-2.5.1a-3.1 [ 187s] [57/155] installing libacl-2.2.49-3.2 [ 187s] [58/155] installing libfile-5.04-3.2 [ 188s] [59/155] installing libxcb-1.8.1-3.1 [ 194s] [60/155] installing lzo-minilzo-2.03-3.3 [ 195s] [61/155] installing make-3.82-3.2 [ 195s] [62/155] installing mpfr-3.0.0-3.2 [ 195s] [63/155] installing ncurses-5.7-3.2 [ 195s] [64/155] installing bzip2-1.0.5-3.2 [ 197s] [65/155] installing libblkid-2.20.2-3.1 [ 198s] [66/155] installing xz-5.0.3-3.3 [ 198s] [67/155] installing binutils-2.22-3.4 [ 199s] [68/155] installing elfutils-libs-0.152-3.8 [ 199s] [69/155] installing nss-3.12.9-3.11 [ 204s] [70/155] installing perl-5.12.1-3.3 [ 242s] [71/155] installing ncurses-base-5.7-3.2 [ 243s] [72/155] installing perl-HTML-Tagset-3.20-3.1 [ 244s] [73/155] installing perl-IO-Compress-Base-2.008-3.3 [ 244s] [74/155] installing perl-Module-Pluggable-3.60-3.3 [ 244s] [75/155] installing perl-Pod-Escapes-1.04-3.3 [ 245s] [76/155] installing perl-TimeDate-1.20-3.1 [ 245s] [77/155] installing eglibc-devel-2.13-3.9 [ 245s] [78/155] installing file-5.04-3.2 [ 245s] [79/155] installing libXau-devel-1.0.7-3.1 [ 246s] [80/155] installing lzo-devel-2.03-3.3 [ 246s] [81/155] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 246s] [82/155] installing perl-devel-5.12.1-3.3 [ 247s] [83/155] installing perl-libs-5.12.1-3.3 [ 249s] [84/155] installing coreutils-6.9-3.3 [ 250s] [85/155] installing libX11-1.5.0-3.1 [ 250s] [86/155] installing libmount-2.20.2-3.1 [ 250s] [87/155] installing mpc-0.9-3.2 [ 251s] [88/155] installing xz-lzma-compat-5.0.3-3.3 [ 251s] [89/155] installing elfutils-0.152-3.8 [ 252s] [90/155] installing nss-sysinit-3.12.9-3.11 [ 253s] [91/155] installing rpm-libs-4.9.1-4.1 [ 254s] [92/155] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 254s] [93/155] installing perl-Pod-Simple-3.07-3.3 [ 255s] [94/155] installing perl-Test-Simple-0.80-3.3 [ 255s] [95/155] installing tizen-accelerator-1.0.1-3.1 [ 256s] [96/155] installing perl-IO-Compress-Zlib-2.008-3.3 [ 256s] [97/155] installing perl-Test-Harness-3.12-3.3 [ 256s] [98/155] installing gawk-3.1.5-3.2 [ 256s] [99/155] installing gzip-1.3.12-3.1 [ 256s] [100/155] installing libxcb-devel-1.8.1-3.1 [ 257s] [101/155] installing build-2011.01.10a-3.1 [ 258s] [102/155] installing rpm-4.9.1-4.1 [ 258s] [103/155] installing cpp-4.6.4-3.14 [ 259s] [104/155] installing dbus-1.6.4-3.1 [ 259s] [105/155] installing util-linux-2.20.2-3.1 [ 260s] [106/155] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 261s] [107/155] installing dbus-libs-1.6.4-3.1 [ 262s] [108/155] installing eglibc-x86-arm-2.13-2.3 [ 264s] [109/155] installing elfutils-libelf-x86-arm-0.152-2.1 [ 264s] [110/155] installing elfutils-libs-x86-arm-0.152-2.3 [ 265s] [111/155] installing gmp-x86-arm-4.2.1-2.1 [ 265s] [112/155] installing libacl-x86-arm-2.2.49-2.1 [ 266s] [113/155] installing libattr-x86-arm-2.4.44-2.1 [ 266s] [114/155] installing libcap-x86-arm-2.21-2.1 [ 266s] [115/155] installing libfile-x86-arm-5.04-2.2 [ 267s] [116/155] installing libgcc-x86-arm-4.6.4-2.1 [ 267s] [117/155] installing liblua-x86-arm-5.1.4-2.1 [ 268s] [118/155] installing mpc-x86-arm-0.9-2.1 [ 268s] [119/155] installing mpfr-x86-arm-3.0.0-2.1 [ 268s] [120/155] installing ncurses-libs-x86-arm-5.7-2.2 [ 269s] [121/155] installing nspr-x86-arm-4.9-2.3 [ 269s] [122/155] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 269s] [123/155] installing nss-x86-arm-3.12.9-2.3 [ 272s] [124/155] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 273s] [125/155] installing popt-x86-arm-1.16-2.1 [ 273s] [126/155] installing rpm-libs-x86-arm-4.9.1-2.2 [ 274s] [127/155] installing sqlite-x86-arm-3.7.13-2.1 [ 274s] [128/155] installing xz-libs-x86-arm-5.0.3-2.1 [ 274s] [129/155] installing zlib-x86-arm-1.2.5-2.1 [ 275s] [130/155] installing libX11-devel-1.5.0-3.1 [ 275s] [131/155] installing gcc-4.6.4-3.14 [ 276s] [132/155] installing rpm-build-4.9.1-4.1 [ 276s] [133/155] installing dbus-devel-1.6.4-3.1 [ 276s] [134/155] installing perl-CPAN-1.9205-3.3 [ 276s] [135/155] installing bash-x86-arm-4.1-2.1 [ 277s] [136/155] installing fdupes-x86-arm-1.40-2.1 [ 277s] [137/155] installing findutils-x86-arm-4.2.31-2.1 [ 277s] [138/155] installing gawk-x86-arm-3.1.5-2.2 [ 278s] [139/155] installing gzip-x86-arm-1.3.12-2.1 [ 278s] [140/155] installing make-x86-arm-3.82-2.1 [ 280s] [141/155] installing sed-x86-arm-4.1.5-2.1 [ 281s] [142/155] installing tar-x86-arm-1.17-2.2 [ 281s] [143/155] installing diffutils-x86-arm-3.0-2.1 [ 282s] [144/155] installing patch-x86-arm-2.6-2.1 [ 282s] [145/155] installing autoconf-2.68-3.1 [ 282s] [146/155] installing coreutils-x86-arm-6.9-2.1 [ 285s] [147/155] installing file-x86-arm-5.04-2.1 [ 285s] [148/155] installing elfutils-x86-arm-0.152-2.3 [ 286s] [149/155] installing gcc-c++-4.6.4-3.14 [ 286s] [150/155] installing rpm-x86-arm-4.9.1-2.2 [ 287s] /bin/rpm.orig-arm already present - skipping. [ 287s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 287s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 287s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 287s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 287s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 287s] [151/155] installing rpm-build-x86-arm-4.9.1-2.2 [ 288s] [152/155] installing automake-1.11.1-3.1 [ 288s] [153/155] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 293s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 293s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 293s] [154/155] installing libtool-2.2.6b-3.2 [ 293s] [155/155] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 295s] removing nis flags from //etc/nsswitch.conf... [ 295s] now finalizing build dir... [ 295s] /.build/build: line 2585: mount: command not found [ 295s] /.build/build: line 2586: mount: command not found [ 308s] build target is armv7l-tizen-linux [ 308s] ----------------------------------------------------------------- [ 308s] I have the following modifications for xorg-x11-xinit.spec: [ 308s] 7c7 [ 308s] < Release: 5 [ 308s] --- [ 308s] > Release: 3.1 [ 308s] ----------------------------------------------------------------- [ 308s] ----- building xorg-x11-xinit.spec (user abuild) [ 308s] ----------------------------------------------------------------- [ 308s] ----------------------------------------------------------------- [ 308s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/2f3d4fd445f421cd69fb1e96823b931d-xorg-x11-xinit' /home/abuild/rpmbuild/SOURCES/xorg-x11-xinit.spec [ 308s] Building target platforms: armv7l-tizen-linux [ 308s] Building for target armv7l-tizen-linux [ 308s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.IwvGvT [ 308s] + umask 022 [ 308s] + cd /home/abuild/rpmbuild/BUILD [ 308s] + LANG=C [ 308s] + export LANG [ 308s] + unset DISPLAY [ 308s] + cd /home/abuild/rpmbuild/BUILD [ 308s] + rm -rf xorg-x11-xinit-1.4.6 [ 308s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-xinit-1.4.6.tar.gz [ 308s] + /bin/tar -xf - [ 308s] + STATUS=0 [ 308s] + '[' 0 -ne 0 ']' [ 308s] + cd xorg-x11-xinit-1.4.6 [ 308s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 308s] + exit 0 [ 308s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MKgkDZ [ 308s] + umask 022 [ 308s] + cd /home/abuild/rpmbuild/BUILD [ 308s] + cd xorg-x11-xinit-1.4.6 [ 308s] + LANG=C [ 308s] + export LANG [ 308s] + unset DISPLAY [ 308s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 308s] + export CFLAGS [ 308s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 308s] + export CXXFLAGS [ 308s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 308s] + export FFLAGS [ 308s] + LD_AS_NEEDED=1 [ 308s] + export LD_AS_NEEDED [ 308s] + autoreconf [ 345s] + ./configure --prefix=/usr 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -g -D_F_EXIT_AFTER_XORG_AND_XCLIENT_LAUNCHED_ -D_F_LAUNCH_WM_AFTER_LAUNCHING_SERVER_ -D_F_SET_DELAY_TIME_TO_WAIT_SERVER_ ' [ 345s] checking for a BSD-compatible install... /usr/bin/install -c [ 346s] checking whether build environment is sane... yes [ 346s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 346s] checking for gawk... gawk [ 346s] checking whether make sets $(MAKE)... yes [ 346s] checking whether to enable maintainer-specific portions of Makefiles... no [ 346s] checking for style of include used by make... GNU [ 346s] checking for gcc... gcc [ 346s] checking whether the C compiler works... yes [ 346s] checking for C compiler default output file name... a.out [ 346s] checking for suffix of executables... [ 346s] checking whether we are cross compiling... no [ 346s] checking for suffix of object files... o [ 346s] checking whether we are using the GNU C compiler... yes [ 346s] checking whether gcc accepts -g... yes [ 346s] checking for gcc option to accept ISO C89... none needed [ 346s] checking dependency style of gcc... gcc3 [ 347s] checking for gcc option to accept ISO C99... -std=gnu99 [ 347s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 347s] checking for grep that handles long lines and -e... /bin/grep [ 347s] checking for egrep... /bin/grep -E [ 347s] checking for ANSI C header files... yes [ 347s] checking for sys/types.h... yes [ 347s] checking for sys/stat.h... yes [ 347s] checking for stdlib.h... yes [ 347s] checking for string.h... yes [ 347s] checking for memory.h... yes [ 347s] checking for strings.h... yes [ 347s] checking for inttypes.h... yes [ 347s] checking for stdint.h... yes [ 347s] checking for unistd.h... yes [ 347s] checking whether __clang__ is declared... no [ 347s] checking whether __INTEL_COMPILER is declared... no [ 347s] checking whether __SUNPRO_C is declared... no [ 347s] checking for pkg-config... /usr/bin/pkg-config [ 347s] checking pkg-config is at least version 0.9.0... yes [ 347s] checking build system type... armv7l-unknown-linux-gnu [ 347s] checking host system type... armv7l-unknown-linux-gnu [ 347s] checking for a sed that does not truncate output... /bin/sed [ 348s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 348s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 348s] checking if gcc -std=gnu99 supports-Wall... yes [ 348s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 348s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 348s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 348s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 348s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 348s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 348s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 348s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 348s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 348s] checking if gcc -std=gnu99 supports-Wunused... yes [ 348s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 348s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 348s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 348s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 348s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 348s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 348s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 349s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 349s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 349s] checking if gcc -std=gnu99 supports-pedantic... yes [ 349s] checking if gcc -std=gnu99 supports-Werror... yes [ 349s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 349s] checking for cpp... /usr/bin/cpp [ 349s] checking if /usr/bin/cpp requires -undef... yes [ 349s] checking if /usr/bin/cpp requires -traditional... yes [ 349s] checking for launchd... no [ 349s] checking for XINIT... yes [ 349s] checking for mcookie... /usr/bin/mcookie [ 349s] configure: creating ./config.status [ 349s] config.status: creating Makefile [ 349s] config.status: creating man/Makefile [ 349s] config.status: creating launchd/Makefile [ 349s] config.status: creating launchd/privileged_startx/Makefile [ 349s] config.status: creating launchd/user_startx/Makefile [ 349s] config.status: creating config.h [ 349s] config.status: executing depfiles commands [ 349s] + make -j6 XINITDIR=/etc/X11/xinit [ 349s] make all-recursive [ 349s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 349s] Making all in man [ 349s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 349s] GEN startx.1 [ 349s] GEN xinit.1 [ 349s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 349s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 349s] CC xinit.o [ 349s] GEN startx [ 349s] GEN xinitrc [ 349s] xinit.c:94:31: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:95:32: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:121:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 349s] xinit.c: In function 'Execute': [ 349s] xinit.c:152:9: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c: In function 'waitforserver': [ 349s] xinit.c:371:13: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:118:13: note: expected 'char *' but argument is of type 'const char *' [ 349s] xinit.c: In function 'startServer': [ 349s] xinit.c:421:19: warning: declaration of 'server' shadows a global declaration [-Wshadow] [ 349s] xinit.c:103:15: warning: shadowed declaration is here [-Wshadow] [ 349s] xinit.c:480:9: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:385:1: note: expected 'char *' but argument is of type 'const char *' [ 349s] xinit.c: At top level: [ 349s] xinit.c:511:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 349s] xinit.c: In function 'set_wm_user_groups': [ 349s] xinit.c:511:1: warning: old-style function definition [-Wold-style-definition] [ 349s] xinit.c:518:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 349s] xinit.c:523:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 349s] xinit.c:552:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 349s] xinit.c:556:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 349s] xinit.c: In function 'startClient': [ 349s] xinit.c:691:19: warning: declaration of 'client' shadows a global declaration [-Wshadow] [ 349s] xinit.c:104:15: warning: shadowed declaration is here [-Wshadow] [ 349s] xinit.c: In function 'shutdown': [ 349s] xinit.c:750:5: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:385:1: note: expected 'char *' but argument is of type 'const char *' [ 349s] xinit.c:761:5: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 349s] xinit.c:385:1: note: expected 'char *' but argument is of type 'const char *' [ 349s] xinit.c: In function 'verror': [ 349s] xinit.c:776:5: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 349s] xinit.c: In function 'verrorx': [ 349s] xinit.c:784:5: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 350s] CCLD xinit [ 350s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 350s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 350s] + exit 0 [ 350s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.nSlHnB [ 350s] + umask 022 [ 350s] + cd /home/abuild/rpmbuild/BUILD [ 350s] + cd xorg-x11-xinit-1.4.6 [ 350s] + LANG=C [ 350s] + export LANG [ 350s] + unset DISPLAY [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 350s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 350s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/license [ 350s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/license/xorg-x11-xinit [ 350s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 350s] Making install in man [ 350s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 350s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 350s] make[2]: Nothing to be done for `install-exec-am'. [ 350s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/man/man1" [ 350s] /usr/bin/install -c -m 644 startx.1 xinit.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/man/man1' [ 350s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 350s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 350s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 350s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 350s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/bin" [ 350s] /usr/bin/install -c xinit '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/bin' [ 350s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/bin" [ 350s] /usr/bin/install -c startx '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/bin' [ 350s] test -z "/usr/lib/X11/xinit" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/lib/X11/xinit" [ 350s] /usr/bin/install -c -m 644 xinitrc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/lib/X11/xinit' [ 350s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 350s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/info [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/doc [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/doc/xorg-x11-xinit [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/gtk-doc [ 350s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/share/man [ 350s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 350s] + xargs rm -f -- [ 350s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 350s] + xargs rm -f -- [ 350s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 350s] + xargs rm -f -- [ 350s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6 [ 350s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm/usr/bin/xinit [ 352s] 40 blocks [ 354s] + /usr/lib/rpm/check-buildroot [ 354s] + /usr/lib/rpm//brp-compress [ 354s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 354s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 354s] + /usr/lib/rpm/brp-python-hardlink [ 354s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 354s] Processing files: xorg-x11-xinit-1.4.6-3.1.armv7l [ 354s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJ4b3JnIi8+Cgk8 [ 354s] L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 354s] [ 354s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 354s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 354s] Processing files: xorg-x11-xinit-debuginfo-1.4.6-3.1.armv7l [ 354s] Processing files: xorg-x11-xinit-debugsource-1.4.6-3.1.armv7l [ 354s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 354s] warning: Installed (but unpackaged) file(s) found: [ 354s] /usr/bin/startx [ 354s] /usr/lib/X11/xinit/xinitrc [ 354s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.4.6-3.1.src.rpm [ 354s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.4.6-3.1.armv7l.rpm [ 354s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.4.6-3.1.armv7l.rpm [ 354s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.4.6-3.1.armv7l.rpm [ 354s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.FMJ3cZ [ 354s] + umask 022 [ 354s] + cd /home/abuild/rpmbuild/BUILD [ 354s] + cd xorg-x11-xinit-1.4.6 [ 354s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-3.1.arm [ 354s] + exit 0 [ 354s] ... checking for files with abuild user/group [ 354s] ... creating baselibs [ 355s] ... saving built statistics [ 355s] /.build/build: line 3144: mount: command not found [ 355s] ERROR: no root disk device found, yet another new device name? [ 355s] ls: cannot access /sys/block/: No such file or directory [ 355s] /.build/build: line 3159: umount: command not found [ 355s] ... saving built packages [ 355s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.4.6-3.1.armv7l.rpm [ 355s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.4.6-3.1.armv7l.rpm [ 355s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.4.6-3.1.armv7l.rpm [ 355s] /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.4.6-3.1.src.rpm [ 355s] /home/abuild/rpmbuild/OTHER/_statistics [ 355s] [ 355s] w17 finished "build xorg-x11-xinit.spec" at Wed Feb 4 12:34:13 UTC 2015. [ 355s] [ 358s] [ 341.761167] SysRq : Power Off [ 358s] [ 341.773093] Power down. [ 359s] build: extracting built packages... [ 359s] xorg-x11-xinit-1.4.6-3.1.armv7l.rpm [ 359s] xorg-x11-xinit-debuginfo-1.4.6-3.1.armv7l.rpm [ 359s] xorg-x11-xinit-debugsource-1.4.6-3.1.armv7l.rpm [ 359s] xorg-x11-xinit-1.4.6-3.1.src.rpm [ 359s] _statistics Retried build at Thu Feb 5 21:04:03 2015 returned same result, skipped