[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:linux-3.4-exynos3250.spec" at Tue Feb 3 06:19:41 UTC 2015. [ 0s] [ 0s] Building linux-3.4-exynos3250 for project 'Tizen:2.3:Wearable' repository 'target' arch 'i586' srcmd5 '43a5cb775125a6bad944fcfd58da9f52' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 0s] [8/31] preinstalling libattr... [ 0s] [9/31] preinstalling liblua... [ 0s] [10/31] preinstalling ncurses-libs... [ 0s] [11/31] preinstalling nspr... [ 0s] [12/31] preinstalling nss-softokn-freebl... [ 0s] [13/31] preinstalling popt... [ 0s] [14/31] preinstalling readline... [ 0s] [15/31] preinstalling sed... [ 0s] [16/31] preinstalling sqlite... [ 0s] [17/31] preinstalling tar... [ 0s] [18/31] preinstalling xz-libs... [ 0s] [19/31] preinstalling zlib... [ 0s] [20/31] preinstalling bash... [ 0s] [21/31] preinstalling diffutils... [ 0s] [22/31] preinstalling libstdc++... [ 0s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 5s] [ 0.000000] tsc: Fast TSC calibration failed [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4061/2392064 files, 216535/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] /.build/build: line 770: mount: command not found [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec build rpmlint-Factory ... [ 8s] initializing rpm db... [ 8s] [1/111] installing cloog-0.16.1-3.3 [ 8s] [2/111] installing kernel-headers-3.0.15-2.1 [ 9s] [3/111] installing tizen-release-2.2.0-3.1 [ 9s] [4/111] installing tzdata-2013h-3.1 [ 9s] [5/111] installing libgcc-4.6.4-3.7 [ 9s] [6/111] installing setup-0.1-3.1 [ 9s] [7/111] installing filesystem-0.1-3.1 [ 9s] warning: group lock does not exist - using root [ 9s] [8/111] installing eglibc-2.13-3.8 [ 9s] [9/111] installing libstdc++-4.6.4-3.7 [ 9s] [10/111] installing bzip2-libs-1.0.5-3.2 [ 9s] [11/111] installing cpio-2.8-3.1 [ 9s] [12/111] installing db4-4.8.30-3.1 [ 10s] [13/111] installing e2fsprogs-libs-1.41.9-3.2 [ 10s] [14/111] installing elfutils-libelf-0.152-3.10 [ 10s] [15/111] installing findutils-4.2.31-3.1 [ 10s] [16/111] installing gdbm-1.8.3-3.2 [ 10s] [17/111] installing libattr-2.4.44-3.4 [ 10s] [18/111] installing liblua-5.1.4-3.2 [ 10s] [19/111] installing libstdc++-devel-4.6.4-3.7 [ 10s] [20/111] installing libuuid-2.20.2-3.1 [ 10s] [21/111] installing lzo-2.03-3.2 [ 10s] [22/111] installing m4-1.4.14-3.1 [ 10s] [23/111] installing net-tools-1.60-3.2 [ 10s] [24/111] installing nspr-4.9-3.7 [ 10s] [25/111] installing nss-softokn-freebl-3.12.9-3.14 [ 10s] [26/111] installing openssl-1.0.1k-3.3 [ 10s] [27/111] installing pkgconfig-0.25-3.1 [ 10s] [28/111] installing popt-1.16-3.2 [ 10s] [29/111] installing readline-5.2-3.2 [ 10s] [30/111] installing sed-4.1.5-3.1 [ 10s] [31/111] installing sqlite-3.7.13-3.2 [ 10s] [32/111] installing tar-1.17-3.1 [ 10s] [33/111] installing xz-libs-5.0.3-3.2 [ 10s] [34/111] installing zlib-1.2.5-3.10 [ 10s] [35/111] installing bash-4.1-3.1 [ 11s] [36/111] installing diffutils-3.0-3.1 [ 11s] [37/111] installing libgomp-4.6.4-3.7 [ 11s] [38/111] installing patch-2.6-3.1 [ 11s] [39/111] installing gmp-4.2.1-3.2 [ 11s] [40/111] installing libpcre-7.7-3.2 [ 11s] [41/111] installing ncurses-libs-5.7-3.2 [ 11s] [42/111] installing build-compare-2009.10.14-3.3 [ 11s] [43/111] installing elfutils-libelf-devel-0.152-3.10 [ 11s] [44/111] installing eglibc-headers-2.13-3.8 [ 11s] [45/111] installing grep-2.5.1a-3.1 [ 11s] [46/111] installing libacl-2.2.49-3.1 [ 11s] [47/111] installing libcap-2.21-3.2 [ 11s] [48/111] installing libfile-5.04-3.2 [ 11s] [49/111] installing libpython-2.7.1-3.4 [ 11s] [50/111] installing lzo-minilzo-2.03-3.2 [ 11s] [51/111] installing lzop-1.03-3.3 [ 11s] [52/111] installing make-3.82-3.1 [ 11s] [53/111] installing mpfr-3.0.0-3.2 [ 11s] [54/111] installing ncurses-5.7-3.2 [ 11s] [55/111] installing unzip-6.0-3.5 [ 11s] [56/111] installing zlib-devel-1.2.5-3.10 [ 11s] [57/111] installing bzip2-1.0.5-3.2 [ 11s] [58/111] installing kmod-libs-15-3.1 [ 11s] [59/111] installing libblkid-2.20.2-3.1 [ 11s] [60/111] installing xz-5.0.3-3.2 [ 12s] [61/111] installing binutils-2.22-3.3 [ 12s] [62/111] installing elfutils-libs-0.152-3.10 [ 12s] [63/111] installing ppl-0.11.2-3.2 [ 12s] [64/111] installing nss-3.12.9-3.14 [ 12s] [65/111] installing perl-5.12.1-3.3 [ 13s] [66/111] installing ncurses-base-5.7-3.2 [ 14s] [67/111] installing perl-HTML-Tagset-3.20-3.1 [ 14s] [68/111] installing perl-IO-Compress-Base-2.008-3.3 [ 14s] [69/111] installing perl-Module-Pluggable-3.60-3.3 [ 14s] [70/111] installing perl-Pod-Escapes-1.04-3.3 [ 14s] [71/111] installing perl-TimeDate-1.20-3.1 [ 14s] [72/111] installing binutils-devel-2.22-3.3 [ 14s] [73/111] installing eglibc-devel-2.13-3.8 [ 14s] [74/111] installing elfutils-devel-0.152-3.10 [ 14s] [75/111] installing file-5.04-3.2 [ 14s] [76/111] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 14s] [77/111] installing perl-libs-5.12.1-3.3 [ 15s] [78/111] installing coreutils-6.9-3.2 [ 18s] [79/111] installing libmount-2.20.2-3.1 [ 18s] [80/111] installing lzo-devel-2.03-3.2 [ 18s] [81/111] installing mpc-0.9-3.2 [ 18s] [82/111] installing perl-devel-5.12.1-3.3 [ 18s] [83/111] installing xz-lzma-compat-5.0.3-3.2 [ 18s] [84/111] installing cloog-ppl-0.16.1-3.3 [ 18s] [85/111] installing nss-sysinit-3.12.9-3.14 [ 19s] [86/111] installing ppl-pwl-0.11.2-3.2 [ 19s] [87/111] installing python-base-2.7.1-3.4 [ 19s] [88/111] installing elfutils-0.152-3.10 [ 19s] [89/111] installing kmod-15-3.1 [ 19s] [90/111] installing eglibc-common-2.13-3.8 [ 22s] [91/111] installing rpm-libs-4.9.1-5.1 [ 22s] [92/111] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 23s] [93/111] installing perl-Pod-Simple-3.07-3.3 [ 23s] [94/111] installing perl-Test-Simple-0.80-3.3 [ 23s] [95/111] installing gawk-3.1.5-3.3 [ 23s] [96/111] installing gzip-1.3.12-3.1 [ 23s] [97/111] installing perl-IO-Compress-Zlib-2.008-3.3 [ 24s] [98/111] installing perl-Test-Harness-3.12-3.3 [ 24s] [99/111] installing rpm-4.9.1-5.1 [ 25s] [100/111] installing build-2011.01.10a-3.1 [ 25s] [101/111] installing util-linux-2.20.2-3.1 [ 26s] [102/111] installing cpp-4.6.4-3.7 [ 26s] [103/111] installing python-2.7.1-3.1 [ 26s] [104/111] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 26s] [105/111] installing gcc-4.6.4-3.7 [ 27s] [106/111] installing rpm-build-4.9.1-5.1 [ 27s] [107/111] installing perl-CPAN-1.9205-3.3 [ 27s] [108/111] installing autoconf-2.68-3.1 [ 27s] [109/111] installing gcc-c++-4.6.4-3.7 [ 27s] [110/111] installing automake-1.11.1-3.1 [ 28s] [111/111] installing libtool-2.2.6b-3.2 [ 28s] removing nis flags from //etc/nsswitch.conf... [ 28s] now finalizing build dir... [ 28s] /.build/build: line 2585: mount: command not found [ 28s] /.build/build: line 2586: mount: command not found [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for linux-3.4-exynos3250.spec: [ 29s] 8c8 [ 29s] < Release: 1 [ 29s] --- [ 29s] > Release: 3.1 [ 29s] ----------------------------------------------------------------- [ 29s] ----- building linux-3.4-exynos3250.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/43a5cb775125a6bad944fcfd58da9f52-linux-3.4-exynos3250' /home/abuild/rpmbuild/SOURCES/linux-3.4-exynos3250.spec [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.rQ6CV0 [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf linux-3.4-exynos3250-1.0.0 [ 29s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/linux-3.4-exynos3250-1.0.0.tar.gz [ 29s] + /bin/tar -xf - [ 34s] + STATUS=0 [ 34s] + '[' 0 -ne 0 ']' [ 34s] + cd linux-3.4-exynos3250-1.0.0 [ 34s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 34s] + exit 0 [ 34s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kAotaV [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd linux-3.4-exynos3250-1.0.0 [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 34s] + export CFLAGS [ 34s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 34s] + export CXXFLAGS [ 34s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 34s] + export FFLAGS [ 34s] + LD_AS_NEEDED=1 [ 34s] + export LD_AS_NEEDED [ 34s] + exit 0 [ 34s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.prPnrP [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd linux-3.4-exynos3250-1.0.0 [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr [ 34s] + make mrproper [ 35s] + make headers_check [ 35s] CHK include/linux/version.h [ 35s] UPD include/linux/version.h [ 35s] HOSTCC scripts/basic/fixdep [ 35s] SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_32.h [ 35s] SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_64.h [ 36s] SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_x32.h [ 36s] SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h [ 36s] HOSTCC arch/x86/tools/relocs [ 36s] HOSTCC scripts/unifdef [ 36s] INSTALL include/asm-generic (34 files) [ 36s] INSTALL include/drm (15 files) [ 36s] INSTALL include/linux/byteorder (2 files) [ 36s] INSTALL include/linux/caif (2 files) [ 36s] INSTALL include/linux/can (5 files) [ 36s] INSTALL include/linux/dvb (8 files) [ 37s] INSTALL include/linux/hdlc (1 file) [ 37s] INSTALL include/linux/hsi (1 file) [ 37s] INSTALL include/linux/isdn (1 file) [ 37s] INSTALL include/linux/mmc (1 file) [ 37s] INSTALL include/linux/netfilter/ipset (4 files) [ 37s] INSTALL include/linux/netfilter (75 files) [ 37s] INSTALL include/linux/netfilter_arp (2 files) [ 37s] INSTALL include/linux/netfilter_bridge (18 files) [ 37s] INSTALL include/linux/netfilter_ipv4 (12 files) [ 37s] INSTALL include/linux/netfilter_ipv6 (11 files) [ 37s] INSTALL include/linux/nfsd (5 files) [ 37s] INSTALL include/linux/raid (2 files) [ 37s] INSTALL include/linux/spi (1 file) [ 37s] INSTALL include/linux/sunrpc (1 file) [ 37s] INSTALL include/linux/tc_act (7 files) [ 37s] INSTALL include/linux/tc_ematch (4 files) [ 37s] INSTALL include/linux/usb (10 files) [ 37s] INSTALL include/linux/wimax (1 file) [ 37s] INSTALL include/linux (380 files) [ 38s] INSTALL include/mtd (5 files) [ 38s] INSTALL include/rdma (6 files) [ 38s] INSTALL include/scsi/fc (4 files) [ 38s] INSTALL include/scsi (3 files) [ 38s] INSTALL include/sound (10 files) [ 38s] INSTALL include/video (3 files) [ 38s] INSTALL include/xen (2 files) [ 38s] INSTALL include (0 file) [ 38s] INSTALL include/asm (58 files) [ 38s] CHECK include/asm-generic (34 files) [ 38s] CHECK include/drm (15 files) [ 38s] CHECK include/linux/byteorder (2 files) [ 38s] CHECK include/linux/caif (2 files) [ 38s] CHECK include/linux/can (5 files) [ 38s] CHECK include/linux/dvb (8 files) [ 38s] CHECK include/linux/hdlc (1 files) [ 38s] CHECK include/linux/hsi (1 files) [ 38s] CHECK include/linux/isdn (1 files) [ 38s] CHECK include/linux/mmc (1 files) [ 38s] CHECK include/linux/netfilter/ipset (4 files) [ 38s] CHECK include/linux/netfilter (75 files) [ 38s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/netfilter/xt_socket.h:14: userspace cannot reference function or variable defined in the kernel [ 38s] CHECK include/linux/netfilter_arp (2 files) [ 38s] CHECK include/linux/netfilter_bridge (18 files) [ 39s] CHECK include/linux/netfilter_ipv4 (12 files) [ 39s] CHECK include/linux/netfilter_ipv6 (11 files) [ 39s] CHECK include/linux/nfsd (5 files) [ 39s] CHECK include/linux/raid (2 files) [ 39s] CHECK include/linux/spi (1 files) [ 39s] CHECK include/linux/sunrpc (1 files) [ 39s] CHECK include/linux/tc_act (7 files) [ 39s] CHECK include/linux/tc_ematch (4 files) [ 39s] CHECK include/linux/usb (10 files) [ 39s] CHECK include/linux/wimax (1 files) [ 39s] CHECK include/linux (380 files) [ 39s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/compiler.h:24: userspace cannot reference function or variable defined in the kernel [ 39s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/compiler.h:25: userspace cannot reference function or variable defined in the kernel [ 39s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/soundcard.h:1054: userspace cannot reference function or variable defined in the kernel [ 39s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/videodev2_exynos_camera.h:1430: found __[us]{8,16,32,64} type without #include [ 39s] CHECK include/mtd (5 files) [ 39s] CHECK include/rdma (6 files) [ 39s] CHECK include/scsi/fc (4 files) [ 39s] CHECK include/scsi (3 files) [ 39s] CHECK include/sound (10 files) [ 39s] CHECK include/video (3 files) [ 39s] CHECK include/xen (2 files) [ 39s] CHECK include (0 files) [ 39s] CHECK include/asm (58 files) [ 39s] + make headers_install INSTALL_HDR_PATH=/home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr [ 40s] CHK include/linux/version.h [ 40s] make[1]: Nothing to be done for `all'. [ 40s] make[1]: Nothing to be done for `relocs'. [ 40s] INSTALL include/asm-generic (34 files) [ 40s] INSTALL include/drm (15 files) [ 40s] INSTALL include/linux/byteorder (2 files) [ 40s] INSTALL include/linux/caif (2 files) [ 40s] INSTALL include/linux/can (5 files) [ 40s] INSTALL include/linux/dvb (8 files) [ 40s] INSTALL include/linux/hdlc (1 file) [ 40s] INSTALL include/linux/hsi (1 file) [ 40s] INSTALL include/linux/isdn (1 file) [ 40s] INSTALL include/linux/mmc (1 file) [ 40s] INSTALL include/linux/netfilter/ipset (4 files) [ 40s] INSTALL include/linux/netfilter (75 files) [ 40s] INSTALL include/linux/netfilter_arp (2 files) [ 40s] INSTALL include/linux/netfilter_bridge (18 files) [ 41s] INSTALL include/linux/netfilter_ipv4 (12 files) [ 41s] INSTALL include/linux/netfilter_ipv6 (11 files) [ 41s] INSTALL include/linux/nfsd (5 files) [ 41s] INSTALL include/linux/raid (2 files) [ 41s] INSTALL include/linux/spi (1 file) [ 41s] INSTALL include/linux/sunrpc (1 file) [ 41s] INSTALL include/linux/tc_act (7 files) [ 41s] INSTALL include/linux/tc_ematch (4 files) [ 41s] INSTALL include/linux/usb (10 files) [ 41s] INSTALL include/linux/wimax (1 file) [ 41s] INSTALL include/linux (380 files) [ 42s] INSTALL include/mtd (5 files) [ 42s] INSTALL include/rdma (6 files) [ 42s] INSTALL include/scsi/fc (4 files) [ 42s] INSTALL include/scsi (3 files) [ 42s] INSTALL include/sound (10 files) [ 42s] INSTALL include/video (3 files) [ 42s] INSTALL include/xen (2 files) [ 42s] INSTALL include (0 file) [ 42s] INSTALL include/asm (58 files) [ 42s] + find /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include -name .install [ 42s] + xargs rm -f [ 42s] + xargs rm -f [ 42s] + find /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include -name ..install.cmd [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include/scsi [ 42s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include/asm*/atomic.h' [ 42s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include/asm*/io.h' [ 42s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/share/license [ 42s] + /usr/lib/rpm/brp-compress [ 42s] Processing files: kernel-headers-3.4-exynos3250-1.0.0-3.1.i586 [ 43s] Provides: kernel-headers [ 43s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 43s] Obsoletes: kernel-headers [ 43s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 50s] Wrote: /home/abuild/rpmbuild/SRPMS/linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 50s] Wrote: /home/abuild/rpmbuild/RPMS/i586/kernel-headers-3.4-exynos3250-1.0.0-3.1.i586.rpm [ 50s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.79AnR8 [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd linux-3.4-exynos3250-1.0.0 [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 50s] + rm -rf /home/abuild/rpmbuild/BUILD [ 51s] + exit 0 [ 51s] ... checking for files with abuild user/group [ 52s] ... creating baselibs [ 52s] ... saving built statistics [ 52s] /.build/build: line 3144: mount: command not found [ 52s] ERROR: no root disk device found, yet another new device name? [ 52s] ls: cannot access /sys/block/: No such file or directory [ 52s] /.build/build: line 3159: umount: command not found [ 52s] ... saving built packages [ 53s] /home/abuild/rpmbuild/RPMS/i586/kernel-headers-3.4-exynos3250-1.0.0-3.1.i586.rpm [ 55s] /home/abuild/rpmbuild/SRPMS/linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 56s] /home/abuild/rpmbuild/OTHER/_statistics [ 57s] [ 57s] w15 finished "build linux-3.4-exynos3250.spec" at Tue Feb 3 06:20:37 UTC 2015. [ 57s] [ 60s] [ 54.812102] SysRq : Power Off [ 60s] [ 54.821612] Power down. [ 60s] build: extracting built packages... [ 61s] kernel-headers-3.4-exynos3250-1.0.0-3.1.i586.rpm [ 61s] linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 61s] _statistics Retried build at Tue Feb 3 02:05:05 2015 returned same result, skipped