[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w22 started "build _service:gbs:perl-HTML-Tagset.spec" at Tue Feb 3 06:14:24 UTC 2015. [ 0s] [ 0s] Building perl-HTML-Tagset for project 'Tizen:2.3:Wearable' repository 'target' arch 'i586' srcmd5 '5a3e3033244f5ffd735516c44f71ca16' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:perl-HTML-Tagset.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:perl-HTML-Tagset.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:perl-HTML-Tagset.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl-IO-Compress-Base -> perl [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 9s] doing fast boot [ 9s] Creating device nodes with udev [ 25s] Waiting for device /dev/vda to appear: ok [ 25s] fsck from util-linux 2.21.2 [ 25s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 25s] /dev/vda: clean, 4041/2392064 files, 187593/9568256 blocks [ 25s] fsck succeeded. Mounting root device read-write. [ 25s] Mounting root /dev/vda [ 25s] mount -o rw -t ext4 /dev/vda /root [ 26s] replacing /etc/mtab with symlink to /proc/self/mounts [ 26s] 2nd stage started in virtual machine [ 26s] machine type: x86_64 [ 26s] switching personality to 8... [ 26s] 2nd stage started in virtual machine [ 26s] machine type: i686 [ 26s] /.build/build: line 770: mount: command not found [ 26s] swapon on /dev/vdb [ 26s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 26s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 26s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 26s] logging output to //.build.log... [ 26s] processing specfile /.build-srcdir/_service:gbs:perl-HTML-Tagset.spec ... [ 26s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-HTML-Tagset.spec build rpmlint-Factory ... [ 26s] initializing rpm db... [ 26s] [1/100] installing cloog-0.16.1-3.3 [ 26s] [2/100] installing kernel-headers-3.0.15-2.1 [ 26s] [3/100] installing tizen-release-2.2.0-3.1 [ 26s] [4/100] installing tzdata-2013h-3.1 [ 26s] [5/100] installing libgcc-4.6.4-3.7 [ 26s] [6/100] installing setup-0.1-3.1 [ 27s] [7/100] installing filesystem-0.1-3.1 [ 27s] warning: group lock does not exist - using root [ 27s] [8/100] installing eglibc-2.13-3.8 [ 27s] [9/100] installing libstdc++-4.6.4-3.7 [ 27s] [10/100] installing bzip2-libs-1.0.5-3.2 [ 27s] [11/100] installing cpio-2.8-3.1 [ 27s] [12/100] installing e2fsprogs-libs-1.41.9-3.2 [ 27s] [13/100] installing elfutils-libelf-0.152-3.10 [ 27s] [14/100] installing findutils-4.2.31-3.1 [ 27s] [15/100] installing gdbm-1.8.3-3.2 [ 27s] [16/100] installing libattr-2.4.44-3.4 [ 27s] [17/100] installing liblua-5.1.4-3.2 [ 27s] [18/100] installing libstdc++-devel-4.6.4-3.7 [ 27s] [19/100] installing libuuid-2.20.2-3.1 [ 27s] [20/100] installing lzo-2.03-3.2 [ 27s] [21/100] installing m4-1.4.14-3.1 [ 28s] [22/100] installing net-tools-1.60-3.2 [ 28s] [23/100] installing nspr-4.9-3.7 [ 28s] [24/100] installing nss-softokn-freebl-3.12.9-3.14 [ 28s] [25/100] installing pkgconfig-0.25-3.1 [ 28s] [26/100] installing popt-1.16-3.2 [ 28s] [27/100] installing readline-5.2-3.2 [ 28s] [28/100] installing sed-4.1.5-3.1 [ 28s] [29/100] installing sqlite-3.7.13-3.2 [ 28s] [30/100] installing tar-1.17-3.1 [ 28s] [31/100] installing xz-libs-5.0.3-3.2 [ 28s] [32/100] installing zlib-1.2.5-3.10 [ 28s] [33/100] installing bash-4.1-3.1 [ 28s] [34/100] installing diffutils-3.0-3.1 [ 28s] [35/100] installing libgomp-4.6.4-3.7 [ 28s] [36/100] installing patch-2.6-3.1 [ 28s] [37/100] installing gmp-4.2.1-3.2 [ 28s] [38/100] installing libpcre-7.7-3.2 [ 28s] [39/100] installing ncurses-libs-5.7-3.2 [ 28s] [40/100] installing build-compare-2009.10.14-3.3 [ 28s] [41/100] installing eglibc-headers-2.13-3.8 [ 28s] [42/100] installing grep-2.5.1a-3.1 [ 29s] [43/100] installing libacl-2.2.49-3.1 [ 29s] [44/100] installing libcap-2.21-3.2 [ 29s] [45/100] installing libfile-5.04-3.2 [ 29s] [46/100] installing lzo-minilzo-2.03-3.2 [ 29s] [47/100] installing make-3.82-3.1 [ 29s] [48/100] installing mpfr-3.0.0-3.2 [ 29s] [49/100] installing ncurses-5.7-3.2 [ 29s] [50/100] installing unzip-6.0-3.5 [ 29s] [51/100] installing zlib-devel-1.2.5-3.10 [ 29s] [52/100] installing bzip2-1.0.5-3.2 [ 29s] [53/100] installing libblkid-2.20.2-3.1 [ 29s] [54/100] installing xz-5.0.3-3.2 [ 29s] [55/100] installing binutils-2.22-3.3 [ 29s] [56/100] installing elfutils-libs-0.152-3.10 [ 30s] [57/100] installing ppl-0.11.2-3.2 [ 30s] [58/100] installing nss-3.12.9-3.14 [ 30s] [59/100] installing perl-5.12.1-3.3 [ 30s] [60/100] installing ncurses-base-5.7-3.2 [ 31s] [61/100] installing perl-IO-Compress-Base-2.008-3.3 [ 31s] [62/100] installing perl-Module-Pluggable-3.60-3.3 [ 31s] [63/100] installing perl-Pod-Escapes-1.04-3.3 [ 31s] [64/100] installing perl-TimeDate-1.20-3.1 [ 31s] [65/100] installing eglibc-devel-2.13-3.8 [ 31s] [66/100] installing file-5.04-3.2 [ 31s] [67/100] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 31s] [68/100] installing perl-libs-5.12.1-3.3 [ 31s] [69/100] installing coreutils-6.9-3.2 [ 31s] [70/100] installing libmount-2.20.2-3.1 [ 31s] [71/100] installing lzo-devel-2.03-3.2 [ 31s] [72/100] installing mpc-0.9-3.2 [ 31s] [73/100] installing perl-devel-5.12.1-3.3 [ 31s] [74/100] installing xz-lzma-compat-5.0.3-3.2 [ 31s] [75/100] installing cloog-ppl-0.16.1-3.3 [ 31s] [76/100] installing nss-sysinit-3.12.9-3.14 [ 32s] [77/100] installing ppl-pwl-0.11.2-3.2 [ 32s] [78/100] installing elfutils-0.152-3.10 [ 32s] [79/100] installing eglibc-common-2.13-3.8 [ 32s] [80/100] installing rpm-libs-4.9.1-5.1 [ 32s] [81/100] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 32s] [82/100] installing perl-Pod-Simple-3.07-3.3 [ 32s] [83/100] installing perl-Test-Simple-0.80-3.3 [ 32s] [84/100] installing gawk-3.1.5-3.3 [ 32s] [85/100] installing gzip-1.3.12-3.1 [ 32s] [86/100] installing perl-IO-Compress-Zlib-2.008-3.3 [ 32s] [87/100] installing perl-Test-Harness-3.12-3.3 [ 32s] [88/100] installing rpm-4.9.1-5.1 [ 33s] [89/100] installing build-2011.01.10a-3.1 [ 33s] [90/100] installing util-linux-2.20.2-3.1 [ 33s] [91/100] installing cpp-4.6.4-3.7 [ 33s] [92/100] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 33s] [93/100] installing perl-Test-Pod-1.42-3.1 [ 33s] [94/100] installing gcc-4.6.4-3.7 [ 33s] [95/100] installing rpm-build-4.9.1-5.1 [ 33s] [96/100] installing perl-CPAN-1.9205-3.3 [ 33s] [97/100] installing autoconf-2.68-3.1 [ 34s] [98/100] installing gcc-c++-4.6.4-3.7 [ 35s] [99/100] installing automake-1.11.1-3.1 [ 37s] [100/100] installing libtool-2.2.6b-3.2 [ 38s] removing nis flags from //etc/nsswitch.conf... [ 38s] now finalizing build dir... [ 38s] /.build/build: line 2585: mount: command not found [ 38s] /.build/build: line 2586: mount: command not found [ 41s] Warning: spec file parser line 11: can't expand %(...) [ 41s] Warning: spec file parser line 15: can't expand %(...) [ 41s] ----------------------------------------------------------------- [ 41s] I have the following modifications for perl-HTML-Tagset.spec: [ 41s] 4c4 [ 41s] < Release: 8 [ 41s] --- [ 41s] > Release: 3.1 [ 41s] 49a50 [ 41s] > %changelog [ 41s] ----------------------------------------------------------------- [ 41s] ----- building perl-HTML-Tagset.spec (user abuild) [ 41s] ----------------------------------------------------------------- [ 41s] ----------------------------------------------------------------- [ 41s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/5a3e3033244f5ffd735516c44f71ca16-perl-HTML-Tagset' /home/abuild/rpmbuild/SOURCES/perl-HTML-Tagset.spec [ 42s] sh: @__ID_U@: command not found [ 42s] sh: @__ID_U@: command not found [ 42s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.HkWnLv [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + rm -rf HTML-Tagset-3.20 [ 42s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/HTML-Tagset-3.20.tar.gz [ 42s] + /bin/tar -xf - [ 42s] + STATUS=0 [ 42s] + '[' 0 -ne 0 ']' [ 42s] + cd HTML-Tagset-3.20 [ 42s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 42s] + exit 0 [ 42s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.WYd9TH [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd HTML-Tagset-3.20 [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 42s] + export CFLAGS [ 42s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 42s] + export CXXFLAGS [ 42s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 42s] + export FFLAGS [ 42s] + LD_AS_NEEDED=1 [ 42s] + export LD_AS_NEEDED [ 42s] + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor [ 42s] Checking if your kit is complete... [ 42s] Looks good [ 42s] Writing Makefile for HTML::Tagset [ 42s] + make -j4 [ 42s] cp Tagset.pm blib/lib/HTML/Tagset.pm [ 42s] Manifying blib/man3/HTML::Tagset.3pm [ 42s] + exit 0 [ 42s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Jmmg3U [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd HTML-Tagset-3.20 [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] + make pure_install PERL_INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] Manifying blib/man3/HTML::Tagset.3pm [ 42s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386/usr/lib/perl5/vendor_perl/5.12.1/HTML/Tagset.pm [ 42s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386/usr/share/man/man3/HTML::Tagset.3pm [ 42s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 -type f -name .packlist -exec rm -f '{}' ';' [ 42s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 -depth -type d -exec rmdir '{}' ';' [ 42s] + chmod -R u+w /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386/usr [ 42s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/HTML-Tagset-3.20 [ 42s] + /usr/lib/rpm/check-buildroot [ 42s] + /usr/lib/rpm//brp-compress [ 42s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 42s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 42s] + /usr/lib/rpm/brp-python-hardlink [ 42s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.oxwPN8 [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd HTML-Tagset-3.20 [ 42s] + unset DISPLAY [ 42s] + make test [ 42s] PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 42s] t/00_about_verbose.t .. ok [ 42s] t/01_old_junk.t ....... ok [ 42s] t/pod.t ............... ok [ 42s] All tests successful. [ 42s] Files=3, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr 0.00 csys = 0.08 CPU) [ 42s] Result: PASS [ 42s] + exit 0 [ 42s] Processing files: perl-HTML-Tagset-3.20-3.1.noarch [ 42s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.hFiUxn [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd HTML-Tagset-3.20 [ 42s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386/usr/share/doc/perl-HTML-Tagset-3.20 [ 42s] + export DOCDIR [ 42s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386/usr/share/doc/perl-HTML-Tagset-3.20 [ 42s] + cp -pr Changes README /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386/usr/share/doc/perl-HTML-Tagset-3.20 [ 42s] + exit 0 [ 42s] Provides: perl(HTML::Tagset) = 3.20 [ 42s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 42s] Requires: perl(strict) perl(vars) [ 42s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-HTML-Tagset-3.20-3.1.src.rpm [ 42s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-HTML-Tagset-3.20-3.1.noarch.rpm [ 42s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.wMel65 [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd HTML-Tagset-3.20 [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Tagset-3.20-3.1.i386 [ 42s] + exit 0 [ 42s] ... checking for files with abuild user/group [ 42s] ... creating baselibs [ 42s] ... saving built statistics [ 42s] /.build/build: line 3144: mount: command not found [ 42s] ERROR: no root disk device found, yet another new device name? [ 42s] ls: cannot access /sys/block/: No such file or directory [ 42s] /.build/build: line 3159: umount: command not found [ 42s] ... saving built packages [ 43s] /home/abuild/rpmbuild/RPMS/noarch/perl-HTML-Tagset-3.20-3.1.noarch.rpm [ 43s] /home/abuild/rpmbuild/SRPMS/perl-HTML-Tagset-3.20-3.1.src.rpm [ 43s] /home/abuild/rpmbuild/OTHER/_statistics [ 43s] [ 43s] w22 finished "build perl-HTML-Tagset.spec" at Tue Feb 3 06:15:07 UTC 2015. [ 43s] [ 45s] /.build/build: line 368: 224 Killed background_monitor_process [ 47s] [ 38.355588] SysRq : Power Off [ 47s] [ 38.464379] Power down. [ 47s] build: extracting built packages... [ 47s] perl-HTML-Tagset-3.20-3.1.noarch.rpm [ 47s] perl-HTML-Tagset-3.20-3.1.src.rpm [ 47s] _statistics Retried build at Tue Feb 3 02:02:56 2015 returned same result, skipped