[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w22 started "build _service:gbs:xcb-util.spec" at Tue Feb 3 10:01:26 UTC 2015. [ 0s] [ 0s] Building xcb-util for project 'Tizen:2.3:Wearable' repository 'target' arch 'i586' srcmd5 '66aab9fb4ed440f53de5dc80e479f3c5' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:xcb-util.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:xcb-util.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:xcb-util.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.21.2 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 4065/2392064 files, 187797/9568256 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 16s] 2nd stage started in virtual machine [ 16s] machine type: x86_64 [ 16s] switching personality to 8... [ 17s] 2nd stage started in virtual machine [ 17s] machine type: i686 [ 17s] /.build/build: line 770: mount: command not found [ 17s] swapon on /dev/vdb [ 17s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 17s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 17s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 17s] logging output to //.build.log... [ 17s] processing specfile /.build-srcdir/_service:gbs:xcb-util.spec ... [ 17s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xcb-util.spec build rpmlint-Factory ... [ 17s] initializing rpm db... [ 17s] [1/108] installing cloog-0.16.1-3.3 [ 17s] [2/108] installing emulator-kernel-user-headers-3.12.18-3.4 [ 17s] [3/108] installing tizen-release-2.2.0-3.1 [ 17s] [4/108] installing tzdata-2013h-3.1 [ 17s] [5/108] installing libgcc-4.6.4-3.10 [ 17s] [6/108] installing setup-0.1-3.1 [ 17s] [7/108] installing filesystem-0.1-3.1 [ 18s] warning: group lock does not exist - using root [ 18s] [8/108] installing eglibc-2.13-3.11 [ 18s] [9/108] installing libstdc++-4.6.4-3.10 [ 18s] [10/108] installing bzip2-libs-1.0.5-3.2 [ 18s] [11/108] installing cpio-2.8-3.2 [ 18s] [12/108] installing e2fsprogs-libs-1.41.9-3.3 [ 18s] [13/108] installing elfutils-libelf-0.152-3.13 [ 18s] [14/108] installing findutils-4.2.31-3.1 [ 18s] [15/108] installing gdbm-1.8.3-3.2 [ 18s] [16/108] installing libXau-1.0.7-3.1 [ 18s] [17/108] installing libattr-2.4.44-3.4 [ 18s] [18/108] installing liblua-5.1.4-3.2 [ 18s] [19/108] installing libstdc++-devel-4.6.4-3.10 [ 18s] [20/108] installing libuuid-2.20.2-3.2 [ 18s] [21/108] installing lzo-2.03-3.2 [ 18s] [22/108] installing m4-1.4.14-3.1 [ 18s] [23/108] installing net-tools-1.60-3.3 [ 18s] [24/108] installing nspr-4.9-3.9 [ 18s] [25/108] installing nss-softokn-freebl-3.12.9-3.17 [ 19s] [26/108] installing pkg-config-0.25-2.1 [ 19s] [27/108] installing popt-1.16-3.2 [ 19s] [28/108] installing readline-5.2-3.2 [ 19s] [29/108] installing sed-4.1.5-3.1 [ 19s] [30/108] installing sqlite-3.7.13-3.2 [ 19s] [31/108] installing tar-1.17-3.2 [ 19s] [32/108] installing xz-libs-5.0.3-3.2 [ 19s] [33/108] installing zlib-1.2.5-3.13 [ 19s] [34/108] installing bash-4.1-3.1 [ 19s] [35/108] installing diffutils-3.0-3.1 [ 19s] [36/108] installing libgomp-4.6.4-3.10 [ 19s] [37/108] installing patch-2.6-3.1 [ 19s] [38/108] installing gmp-4.2.1-3.2 [ 19s] [39/108] installing gperf-3.0.4-3.1 [ 19s] [40/108] installing libpcre-7.7-3.2 [ 19s] [41/108] installing ncurses-libs-5.7-3.3 [ 19s] [42/108] installing build-compare-2009.10.14-3.4 [ 19s] [43/108] installing libpthread-stubs-0.3-3.1 [ 19s] [44/108] installing xorg-x11-proto-core-7.0.25-3.1 [ 19s] [45/108] installing xorg-x11-xutils-dev-7.7-3.1 [ 19s] [46/108] installing eglibc-headers-2.13-3.11 [ 19s] [47/108] installing grep-2.5.1a-3.1 [ 19s] [48/108] installing libacl-2.2.49-3.1 [ 19s] [49/108] installing libcap-2.21-3.2 [ 19s] [50/108] installing libfile-5.04-3.3 [ 19s] [51/108] installing libxcb-1.8.1-3.1 [ 20s] [52/108] installing lzo-minilzo-2.03-3.2 [ 20s] [53/108] installing make-3.82-3.1 [ 20s] [54/108] installing mpfr-3.0.0-3.2 [ 20s] [55/108] installing ncurses-5.7-3.3 [ 20s] [56/108] installing unzip-6.0-3.7 [ 20s] [57/108] installing zlib-devel-1.2.5-3.13 [ 20s] [58/108] installing bzip2-1.0.5-3.2 [ 20s] [59/108] installing libblkid-2.20.2-3.2 [ 20s] [60/108] installing xz-5.0.3-3.2 [ 20s] [61/108] installing binutils-2.22-3.4 [ 20s] [62/108] installing elfutils-libs-0.152-3.13 [ 20s] [63/108] installing ppl-0.11.2-3.3 [ 20s] [64/108] installing nss-3.12.9-3.17 [ 20s] [65/108] installing perl-5.12.1-3.4 [ 21s] [66/108] installing ncurses-base-5.7-3.3 [ 21s] [67/108] installing perl-HTML-Tagset-3.20-3.1 [ 21s] [68/108] installing perl-IO-Compress-Base-2.008-3.4 [ 21s] [69/108] installing perl-Module-Pluggable-3.60-3.4 [ 21s] [70/108] installing perl-Pod-Escapes-1.04-3.4 [ 21s] [71/108] installing perl-TimeDate-1.20-3.1 [ 21s] [72/108] installing eglibc-devel-2.13-3.11 [ 21s] [73/108] installing file-5.04-3.3 [ 21s] [74/108] installing perl-Compress-Raw-Zlib-2.008-3.4 [ 21s] [75/108] installing perl-libs-5.12.1-3.4 [ 21s] [76/108] installing coreutils-6.9-3.2 [ 22s] [77/108] installing libXau-devel-1.0.7-3.1 [ 22s] [78/108] installing libmount-2.20.2-3.2 [ 22s] [79/108] installing lzo-devel-2.03-3.2 [ 22s] [80/108] installing mpc-0.9-3.2 [ 22s] [81/108] installing perl-devel-5.12.1-3.4 [ 22s] [82/108] installing xz-lzma-compat-5.0.3-3.2 [ 22s] [83/108] installing cloog-ppl-0.16.1-3.3 [ 22s] [84/108] installing nss-sysinit-3.12.9-3.17 [ 22s] [85/108] installing ppl-pwl-0.11.2-3.3 [ 22s] [86/108] installing elfutils-0.152-3.13 [ 22s] [87/108] installing eglibc-common-2.13-3.11 [ 22s] [88/108] installing rpm-libs-4.9.1-4.1 [ 22s] [89/108] installing perl-ExtUtils-ParseXS-2.18-3.4 [ 22s] [90/108] installing perl-Pod-Simple-3.07-3.4 [ 22s] [91/108] installing perl-Test-Simple-0.80-3.4 [ 22s] [92/108] installing gawk-3.1.5-3.4 [ 22s] [93/108] installing gzip-1.3.12-3.1 [ 22s] [94/108] installing perl-IO-Compress-Zlib-2.008-3.4 [ 22s] [95/108] installing perl-Test-Harness-3.12-3.4 [ 22s] [96/108] installing libxcb-devel-1.8.1-3.1 [ 22s] [97/108] installing rpm-4.9.1-4.1 [ 23s] [98/108] installing build-2011.01.10a-3.1 [ 23s] [99/108] installing util-linux-2.20.2-3.2 [ 23s] [100/108] installing cpp-4.6.4-3.10 [ 23s] [101/108] installing perl-ExtUtils-MakeMaker-6.36-3.4 [ 23s] [102/108] installing gcc-4.6.4-3.10 [ 23s] [103/108] installing rpm-build-4.9.1-4.1 [ 23s] [104/108] installing perl-CPAN-1.9205-3.4 [ 23s] [105/108] installing autoconf-2.68-3.1 [ 23s] [106/108] installing gcc-c++-4.6.4-3.10 [ 24s] [107/108] installing automake-1.11.1-3.1 [ 24s] [108/108] installing libtool-2.2.6b-3.2 [ 24s] removing nis flags from //etc/nsswitch.conf... [ 24s] now finalizing build dir... [ 24s] /.build/build: line 2585: mount: command not found [ 24s] /.build/build: line 2586: mount: command not found [ 24s] ----------------------------------------------------------------- [ 24s] I have the following modifications for xcb-util.spec: [ 24s] 5c5 [ 24s] < Release: slp.1.3 [ 24s] --- [ 24s] > Release: 3.2 [ 24s] ----------------------------------------------------------------- [ 24s] ----- building xcb-util.spec (user abuild) [ 24s] ----------------------------------------------------------------- [ 24s] ----------------------------------------------------------------- [ 24s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/66aab9fb4ed440f53de5dc80e479f3c5-xcb-util' /home/abuild/rpmbuild/SOURCES/xcb-util.spec [ 24s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.d6HmKj [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + LANG=C [ 24s] + export LANG [ 24s] + unset DISPLAY [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + rm -rf xcb-util-0.3.8 [ 24s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-util-0.3.8.tar.gz [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + cd xcb-util-0.3.8 [ 24s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 24s] + exit 0 [ 24s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TriWxy [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd xcb-util-0.3.8 [ 24s] + LANG=C [ 24s] + export LANG [ 24s] + unset DISPLAY [ 24s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 24s] + export CFLAGS [ 24s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 24s] + export CXXFLAGS [ 24s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 24s] + export FFLAGS [ 24s] + LD_AS_NEEDED=1 [ 24s] + export LD_AS_NEEDED [ 24s] + ./autogen.sh [ 24s] libtoolize: putting auxiliary files in `.'. [ 24s] libtoolize: linking file `./ltmain.sh' [ 24s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 24s] libtoolize: linking file `m4/libtool.m4' [ 24s] libtoolize: linking file `m4/ltoptions.m4' [ 24s] libtoolize: linking file `m4/ltsugar.m4' [ 24s] libtoolize: linking file `m4/ltversion.m4' [ 24s] libtoolize: linking file `m4/lt~obsolete.m4' [ 24s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 24s] autoreconf: Entering directory `.' [ 24s] autoreconf: configure.ac: not using Gettext [ 25s] autoreconf: running: aclocal -I m4 [ 27s] autoreconf: configure.ac: tracing [ 27s] autoreconf: running: libtoolize --copy [ 28s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 29s] autoreconf: running: /usr/bin/autoconf [ 29s] autoreconf: configure.ac: not using Autoheader [ 29s] autoreconf: running: automake --add-missing --copy --no-force [ 30s] configure.ac:10: installing `./config.guess' [ 30s] configure.ac:10: installing `./config.sub' [ 30s] configure.ac:6: installing `./install-sh' [ 30s] configure.ac:6: installing `./missing' [ 30s] src/Makefile.am: installing `./depcomp' [ 30s] autoreconf: Leaving directory `.' [ 30s] checking for a BSD-compatible install... /usr/bin/install -c [ 31s] checking whether build environment is sane... yes [ 31s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 31s] checking for gawk... gawk [ 31s] checking whether make sets $(MAKE)... yes [ 31s] checking whether to enable maintainer-specific portions of Makefiles... no [ 31s] checking for m4 that supports -I option... /usr/bin/m4 [ 32s] checking build system type... i686-pc-linux-gnu [ 32s] checking host system type... i686-pc-linux-gnu [ 32s] checking for style of include used by make... GNU [ 32s] checking for gcc... gcc [ 32s] checking whether the C compiler works... yes [ 32s] checking for C compiler default output file name... a.out [ 32s] checking for suffix of executables... [ 32s] checking whether we are cross compiling... no [ 32s] checking for suffix of object files... o [ 32s] checking whether we are using the GNU C compiler... yes [ 32s] checking whether gcc accepts -g... yes [ 32s] checking for gcc option to accept ISO C89... none needed [ 32s] checking dependency style of gcc... gcc3 [ 32s] checking for a sed that does not truncate output... /bin/sed [ 32s] checking for grep that handles long lines and -e... /bin/grep [ 32s] checking for egrep... /bin/grep -E [ 32s] checking for fgrep... /bin/grep -F [ 32s] checking for ld used by gcc... /usr/bin/ld [ 32s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 32s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 32s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 32s] checking whether ln -s works... yes [ 32s] checking the maximum length of command line arguments... 1572864 [ 32s] checking whether the shell understands some XSI constructs... yes [ 32s] checking whether the shell understands "+="... yes [ 32s] checking for /usr/bin/ld option to reload object files... -r [ 32s] checking for objdump... objdump [ 32s] checking how to recognize dependent libraries... pass_all [ 32s] checking for ar... ar [ 32s] checking for strip... strip [ 32s] checking for ranlib... ranlib [ 32s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 32s] checking how to run the C preprocessor... gcc -E [ 34s] checking for ANSI C header files... yes [ 34s] checking for sys/types.h... yes [ 34s] checking for sys/stat.h... yes [ 34s] checking for stdlib.h... yes [ 34s] checking for string.h... yes [ 34s] checking for memory.h... yes [ 34s] checking for strings.h... yes [ 34s] checking for inttypes.h... yes [ 34s] checking for stdint.h... yes [ 34s] checking for unistd.h... yes [ 34s] checking for dlfcn.h... yes [ 34s] checking for objdir... .libs [ 35s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 36s] checking for gcc option to produce PIC... -fPIC -DPIC [ 36s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 36s] checking if gcc static flag -static works... no [ 36s] checking if gcc supports -c -o file.o... yes [ 36s] checking if gcc supports -c -o file.o... (cached) yes [ 36s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 36s] checking whether -lc should be explicitly linked in... no [ 37s] checking dynamic linker characteristics... GNU/Linux ld.so [ 37s] checking how to hardcode library paths into programs... immediate [ 37s] checking whether stripping libraries is possible... yes [ 37s] checking if libtool supports shared libraries... yes [ 37s] checking whether to build shared libraries... yes [ 37s] checking whether to build static libraries... yes [ 37s] checking for pkg-config... /usr/bin/pkg-config [ 37s] checking pkg-config is at least version 0.9.0... yes [ 38s] checking for gcc option to accept ISO C99... -std=gnu99 [ 39s] checking whether __clang__ is declared... no [ 39s] checking whether __INTEL_COMPILER is declared... no [ 40s] checking whether __SUNPRO_C is declared... no [ 40s] checking for XCB... yes [ 40s] checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) gawk [ 40s] yes [ 40s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 40s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 40s] checking if gcc -std=gnu99 supports-Wall... yes [ 40s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 40s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 40s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 40s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 40s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 40s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 40s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 40s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 40s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 40s] checking if gcc -std=gnu99 supports-Wunused... yes [ 40s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 40s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 40s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 40s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 40s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 40s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 40s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 41s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 41s] checking if gcc -std=gnu99 supports-pedantic... yes [ 41s] checking if gcc -std=gnu99 supports-Werror... yes [ 41s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 41s] checking whether to build developer documentation... yes [ 41s] checking for doxygen... no [ 41s] configure: WARNING: doxygen not found - documentation targets will be skipped [ 41s] checking for gperf... gperf [ 41s] checking for vasprintf... yes [ 41s] checking for ssize_t... yes [ 41s] checking for XPROTO... yes [ 41s] configure: creating ./config.status [ 41s] config.status: creating Makefile [ 41s] config.status: creating src/Makefile [ 41s] config.status: creating xcb-atom.pc [ 41s] config.status: creating xcb-aux.pc [ 41s] config.status: creating xcb-event.pc [ 41s] config.status: creating xcb-util.pc [ 41s] config.status: creating xcb-renderutil.pc [ 41s] config.status: creating xcb_util_intro [ 41s] config.status: executing depfiles commands [ 41s] config.status: executing libtool commands [ 41s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 41s] + export CFLAGS [ 41s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 41s] + export CXXFLAGS [ 41s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 41s] + export FFLAGS [ 41s] + autoreconf -v --install --force [ 41s] autoreconf: Entering directory `.' [ 41s] autoreconf: configure.ac: not using Gettext [ 42s] autoreconf: running: aclocal --force -I m4 [ 44s] autoreconf: configure.ac: tracing [ 45s] autoreconf: running: libtoolize --copy --force [ 45s] libtoolize: putting auxiliary files in `.'. [ 45s] libtoolize: copying file `./ltmain.sh' [ 45s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 45s] libtoolize: copying file `m4/libtool.m4' [ 45s] libtoolize: copying file `m4/ltoptions.m4' [ 45s] libtoolize: copying file `m4/ltsugar.m4' [ 45s] libtoolize: copying file `m4/ltversion.m4' [ 45s] libtoolize: copying file `m4/lt~obsolete.m4' [ 45s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 47s] autoreconf: running: /usr/bin/autoconf --force [ 48s] autoreconf: configure.ac: not using Autoheader [ 48s] autoreconf: running: automake --add-missing --copy --force-missing [ 48s] autoreconf: Leaving directory `.' [ 48s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 48s] checking for a BSD-compatible install... /usr/bin/install -c [ 49s] checking whether build environment is sane... yes [ 49s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 49s] checking for gawk... gawk [ 49s] checking whether make sets $(MAKE)... yes [ 49s] checking whether to enable maintainer-specific portions of Makefiles... no [ 49s] checking for m4 that supports -I option... /usr/bin/m4 [ 49s] checking build system type... i686-pc-linux-gnu [ 49s] checking host system type... i686-pc-linux-gnu [ 49s] checking for style of include used by make... GNU [ 49s] checking for i686-pc-linux-gnu-gcc... no [ 49s] checking for gcc... gcc [ 50s] checking whether the C compiler works... yes [ 50s] checking for C compiler default output file name... a.out [ 51s] checking for suffix of executables... [ 51s] checking whether we are cross compiling... no [ 51s] checking for suffix of object files... o [ 51s] checking whether we are using the GNU C compiler... yes [ 51s] checking whether gcc accepts -g... yes [ 51s] checking for gcc option to accept ISO C89... none needed [ 51s] checking dependency style of gcc... gcc3 [ 51s] checking for a sed that does not truncate output... /bin/sed [ 51s] checking for grep that handles long lines and -e... /bin/grep [ 51s] checking for egrep... /bin/grep -E [ 51s] checking for fgrep... /bin/grep -F [ 51s] checking for ld used by gcc... /usr/bin/ld [ 51s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 51s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 51s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 51s] checking whether ln -s works... yes [ 51s] checking the maximum length of command line arguments... 1572864 [ 51s] checking whether the shell understands some XSI constructs... yes [ 51s] checking whether the shell understands "+="... yes [ 51s] checking for /usr/bin/ld option to reload object files... -r [ 51s] checking for i686-pc-linux-gnu-objdump... no [ 51s] checking for objdump... objdump [ 51s] checking how to recognize dependent libraries... pass_all [ 51s] checking for i686-pc-linux-gnu-ar... no [ 51s] checking for ar... ar [ 51s] checking for i686-pc-linux-gnu-strip... no [ 51s] checking for strip... strip [ 51s] checking for i686-pc-linux-gnu-ranlib... no [ 51s] checking for ranlib... ranlib [ 51s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 51s] checking how to run the C preprocessor... gcc -E [ 51s] checking for ANSI C header files... yes [ 51s] checking for sys/types.h... yes [ 51s] checking for sys/stat.h... yes [ 51s] checking for stdlib.h... yes [ 51s] checking for string.h... yes [ 51s] checking for memory.h... yes [ 51s] checking for strings.h... yes [ 51s] checking for inttypes.h... yes [ 51s] checking for stdint.h... yes [ 51s] checking for unistd.h... yes [ 51s] checking for dlfcn.h... yes [ 51s] checking for objdir... .libs [ 51s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 51s] checking for gcc option to produce PIC... -fPIC -DPIC [ 51s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 51s] checking if gcc static flag -static works... no [ 51s] checking if gcc supports -c -o file.o... yes [ 51s] checking if gcc supports -c -o file.o... (cached) yes [ 51s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 51s] checking whether -lc should be explicitly linked in... no [ 52s] checking dynamic linker characteristics... GNU/Linux ld.so [ 52s] checking how to hardcode library paths into programs... immediate [ 52s] checking whether stripping libraries is possible... yes [ 52s] checking if libtool supports shared libraries... yes [ 52s] checking whether to build shared libraries... yes [ 52s] checking whether to build static libraries... no [ 52s] checking for i686-pc-linux-gnu-pkg-config... no [ 52s] checking for pkg-config... /usr/bin/pkg-config [ 52s] checking pkg-config is at least version 0.9.0... yes [ 52s] checking for gcc option to accept ISO C99... -std=gnu99 [ 52s] checking whether __clang__ is declared... no [ 52s] checking whether __INTEL_COMPILER is declared... no [ 52s] checking whether __SUNPRO_C is declared... no [ 52s] checking for XCB... yes [ 52s] checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) gawk [ 52s] yes [ 52s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 52s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 52s] checking if gcc -std=gnu99 supports-Wall... yes [ 52s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 52s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 52s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 52s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 52s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 52s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 52s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 52s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 53s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 53s] checking if gcc -std=gnu99 supports-Wunused... yes [ 53s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 53s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 53s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 53s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 53s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 53s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 53s] checking if gcc -std=gnu99 supports-pedantic... yes [ 53s] checking if gcc -std=gnu99 supports-Werror... yes [ 53s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 53s] checking whether to build developer documentation... yes [ 53s] checking for doxygen... no [ 53s] configure: WARNING: doxygen not found - documentation targets will be skipped [ 53s] checking for gperf... gperf [ 53s] checking for vasprintf... yes [ 53s] checking for ssize_t... yes [ 53s] checking for XPROTO... yes [ 53s] configure: creating ./config.status [ 54s] config.status: creating Makefile [ 54s] config.status: creating src/Makefile [ 54s] config.status: creating xcb-atom.pc [ 54s] config.status: creating xcb-aux.pc [ 54s] config.status: creating xcb-event.pc [ 54s] config.status: creating xcb-util.pc [ 54s] config.status: creating xcb-renderutil.pc [ 54s] config.status: creating xcb_util_intro [ 54s] config.status: executing depfiles commands [ 54s] config.status: executing libtool commands [ 54s] + make -j4 [ 54s] Making all in src [ 54s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] /usr/bin/m4 -I. atoms.gperf.m4 >atoms.gperf [ 54s] gperf --output-file atoms.c atoms.gperf [ 54s] make all-am [ 54s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] CC atoms.lo [ 54s] CC event.lo [ 54s] CC xcb_aux.lo [ 54s] atoms.gperf:37:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 54s] atoms.gperf: In function 'hash': [ 54s] atoms.gperf:37:1: warning: old-style function definition [-Wold-style-definition] [ 54s] atoms.gperf: At top level: [ 54s] atoms.gperf:241:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 54s] atoms.gperf: In function 'in_word_set': [ 54s] atoms.gperf:241:1: warning: old-style function definition [-Wold-style-definition] [ 54s] atoms.gperf: In function 'makename': [ 54s] atoms.gperf:292:2: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 54s] CCLD libxcb-util.la [ 54s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 54s] make[1]: Nothing to be done for `all-am'. [ 54s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 54s] + exit 0 [ 54s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ODZsTB [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd xcb-util-0.3.8 [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 install [ 54s] Making install in src [ 54s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] /usr/bin/make install-am [ 54s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib" [ 54s] /bin/sh ../libtool --mode=install /usr/bin/install -c libxcb-util.la '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib' [ 54s] libtool: install: /usr/bin/install -c .libs/libxcb-util.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib/libxcb-util.so.0.0.0 [ 54s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib && { ln -s -f libxcb-util.so.0.0.0 libxcb-util.so.0 || { rm -f libxcb-util.so.0 && ln -s libxcb-util.so.0.0.0 libxcb-util.so.0; }; }) [ 54s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib && { ln -s -f libxcb-util.so.0.0.0 libxcb-util.so || { rm -f libxcb-util.so && ln -s libxcb-util.so.0.0.0 libxcb-util.so; }; }) [ 54s] libtool: install: /usr/bin/install -c .libs/libxcb-util.lai /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib/libxcb-util.la [ 54s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 54s] test -z "/usr/include/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/include/xcb" [ 54s] /usr/bin/install -c -m 644 xcb_util.h xcb_atom.h xcb_aux.h xcb_bitops.h xcb_event.h '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/include/xcb' [ 54s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 54s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 54s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 54s] make[2]: Nothing to be done for `install-exec-am'. [ 54s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib/pkgconfig" [ 54s] /usr/bin/install -c -m 644 xcb-atom.pc xcb-aux.pc xcb-event.pc xcb-util.pc xcb-renderutil.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib/pkgconfig' [ 54s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 54s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 54s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/share/info/dir [ 54s] + xargs rm -f -- [ 54s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 -regex '.*\.la$' [ 54s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 -regex '.*\.a$' [ 54s] + xargs rm -f -- [ 54s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-util-0.3.8 [ 54s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/lib/libxcb-util.so.0.0.0 [ 54s] symlinked /usr/lib/debug/usr/lib/libxcb-util.so.0.0.0.debug to /usr/lib/debug/usr/lib/libxcb-util.so.0.debug [ 54s] symlinked /usr/lib/debug/usr/lib/libxcb-util.so.0.0.0.debug to /usr/lib/debug/usr/lib/libxcb-util.so.debug [ 54s] 56 blocks [ 54s] + /usr/lib/rpm/check-buildroot [ 54s] + /usr/lib/rpm//brp-compress [ 54s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 54s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 54s] + /usr/lib/rpm/brp-python-hardlink [ 54s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] Processing files: xcb-util-0.3.8-3.2.i586 [ 54s] Provides: libxcb-util.so.0 xcb-renderutil [ 54s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Requires(post): /sbin/ldconfig [ 54s] Requires(postun): /sbin/ldconfig [ 54s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.8) libxcb.so.1 [ 54s] Processing files: xcb-util-devel-0.3.8-3.2.i586 [ 54s] Provides: pkgconfig(xcb-atom) = 0.3.8 pkgconfig(xcb-aux) = 0.3.8 pkgconfig(xcb-event) = 0.3.8 pkgconfig(xcb-renderutil) = 0.3.8 pkgconfig(xcb-util) = 0.3.8 [ 54s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 54s] Requires: /usr/bin/pkg-config libxcb-util.so.0 pkgconfig(xcb) [ 54s] Processing files: xcb-util-debuginfo-0.3.8-3.2.i586 [ 54s] Processing files: xcb-util-debugsource-0.3.8-3.2.i586 [ 54s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-3.2.src.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-0.3.8-3.2.i586.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-devel-0.3.8-3.2.i586.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-debuginfo-0.3.8-3.2.i586.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-debugsource-0.3.8-3.2.i586.rpm [ 54s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.hnjlL0 [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd xcb-util-0.3.8 [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 [ 54s] + exit 0 [ 54s] ... checking for files with abuild user/group [ 54s] ... creating baselibs [ 54s] ... comparing built packages with the former built [ 54s] /usr/lib/build/rpm-check.sh [ 55s] compare /.build.oldpackages/xcb-util-0.3.8-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-3.2.src.rpm [ 55s] compare /.build.oldpackages/xcb-util-0.3.8-3.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-0.3.8-3.2.i586.rpm [ 55s] --- /tmp/tmp.tAuY8b3uhQ 2015-02-03 10:02:20.694866055 +0000 [ 55s] +++ /tmp/tmp.MvITGRsRpJ 2015-02-03 10:02:20.706866056 +0000 [ 55s] @@ -17,14 +17,14 @@ [ 55s] [ 55s] /sbin/ldconfig [ 55s] [ 55s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386/usr/share/info [ 55s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386/usr/share/doc [ 55s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386/usr/share/doc/xcb-util [ 55s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386/usr/share/gtk-doc [ 55s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386/usr/share/man [ 55s] -find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386 -regex ".*/man/man./.*.[0-9]" | xargs rm -f -- [ 55s] -find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386 -regex ".*/man/../man./.*.[0-9]" | xargs rm -f -- [ 55s] -find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.i386 -regex ".*/man/man./.*.[0-9]pm" | xargs rm -f -- [ 55s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/share/info [ 55s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/share/doc [ 55s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/share/doc/xcb-util [ 55s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/share/gtk-doc [ 55s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386/usr/share/man [ 55s] +find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 -regex ".*/man/man./.*.[0-9]" | xargs rm -f -- [ 55s] +find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 -regex ".*/man/../man./.*.[0-9]" | xargs rm -f -- [ 55s] +find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.2.i386 -regex ".*/man/man./.*.[0-9]pm" | xargs rm -f -- [ 55s] [ 55s] [ 55s] (none) (none) (none) [ 55s] RPM meta information is different [ 55s] compare /.build.oldpackages/xcb-util-debuginfo-0.3.8-3.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-debuginfo-0.3.8-3.2.i586.rpm [ 55s] compare /.build.oldpackages/xcb-util-debugsource-0.3.8-3.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-debugsource-0.3.8-3.2.i586.rpm [ 55s] compare /.build.oldpackages/xcb-util-devel-0.3.8-3.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-devel-0.3.8-3.2.i586.rpm [ 56s] ... saving built statistics [ 56s] /.build/build: line 3144: mount: command not found [ 56s] ERROR: no root disk device found, yet another new device name? [ 56s] ls: cannot access /sys/block/: No such file or directory [ 56s] /.build/build: line 3159: umount: command not found [ 56s] ... saving built packages [ 56s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-0.3.8-3.2.i586.rpm [ 56s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-debuginfo-0.3.8-3.2.i586.rpm [ 56s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-debugsource-0.3.8-3.2.i586.rpm [ 56s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-devel-0.3.8-3.2.i586.rpm [ 56s] /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-3.2.src.rpm [ 56s] /home/abuild/rpmbuild/OTHER/_statistics [ 56s] [ 56s] w22 finished "build xcb-util.spec" at Tue Feb 3 10:02:21 UTC 2015. [ 56s] [ 59s] [ 51.736435] SysRq : Power Off [ 59s] [ 51.744889] Power down. [ 59s] build: extracting built packages... [ 59s] xcb-util-0.3.8-3.2.i586.rpm [ 59s] xcb-util-debuginfo-0.3.8-3.2.i586.rpm [ 59s] xcb-util-debugsource-0.3.8-3.2.i586.rpm [ 59s] xcb-util-devel-0.3.8-3.2.i586.rpm [ 59s] xcb-util-0.3.8-3.2.src.rpm [ 59s] _statistics