[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w18 started "build _service:gbs:perl-Pod-Coverage.spec" at Mon Oct 26 16:49:34 UTC 2015. [ 0s] [ 0s] Building perl-Pod-Coverage for project 'Tizen:2.4:Base' repository 'emulator' arch 'i586' srcmd5 '28ecc0ae05d36d328403b94b3307d3ab' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec build rpmlint-Factory ... [ 0s] cycle: bash -> glibc -> glibc-common [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: bash -> glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: glibc -> libgcc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling glibc... [ 0s] [6/31] preinstalling bash... [ 0s] [7/31] preinstalling bzip2-libs... [ 0s] [8/31] preinstalling diffutils... [ 0s] [9/31] preinstalling elfutils-libelf... [ 0s] [10/31] preinstalling libattr... [ 1s] [11/31] preinstalling liblua... [ 1s] [12/31] preinstalling ncurses-libs... [ 1s] [13/31] preinstalling nspr... [ 1s] [14/31] preinstalling nss-softokn-freebl... [ 1s] [15/31] preinstalling popt... [ 1s] [16/31] preinstalling readline... [ 1s] [17/31] preinstalling sed... [ 1s] [18/31] preinstalling sqlite... [ 1s] [19/31] preinstalling xz-libs... [ 1s] [20/31] preinstalling zlib... [ 1s] [21/31] preinstalling libstdc++... [ 1s] [22/31] preinstalling glibc-common... [ 1s] [23/31] preinstalling libacl... [ 1s] [24/31] preinstalling libcap... [ 1s] [25/31] preinstalling libfile... [ 1s] [26/31] preinstalling bzip2... [ 1s] [27/31] preinstalling nss... [ 1s] [28/31] preinstalling tar... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> glibc -> glibc-common [ 2s] breaking dependency glibc-common -> bash [ 2s] cycle: bash -> glibc -> glibc-common -> coreutils [ 2s] breaking dependency glibc-common -> coreutils [ 2s] cycle: glibc -> glibc-common -> findutils [ 2s] breaking dependency glibc-common -> findutils [ 2s] cycle: glibc -> glibc-common [ 2s] breaking dependency glibc-common -> glibc [ 2s] cycle: glibc -> glibc-common -> grep [ 2s] breaking dependency grep -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency glibc -> glibc-common [ 2s] cycle: glibc -> libgcc [ 2s] breaking dependency libgcc -> glibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-devel -> perl-ExtUtils-ParseXS [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4071/2392064 files, 194097/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:perl-Pod-Coverage.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-Pod-Coverage.spec build rpmlint-Factory ... [ 6s] initializing rpm db... [ 6s] [1/115] cumulate kernel-headers-3.4.91-1.1 [ 6s] [2/115] cumulate tizen-release-2.2.0-1.1 [ 6s] [3/115] cumulate tzdata-2014j-1.1 [ 6s] [4/115] cumulate libgcc-4.9.2-2015.02.1.7 [ 6s] [5/115] cumulate setup-0.2-6.3 [ 6s] [6/115] cumulate filesystem-0.1-5.2 [ 6s] [7/115] cumulate glibc-2.20-2014.11.1.4 [ 6s] [8/115] cumulate libstdc++-4.9.2-2015.02.1.7 [ 6s] [9/115] cumulate bash-4.1-1.1 [ 6s] [10/115] cumulate bzip2-libs-1.0.5-1.4 [ 6s] [11/115] cumulate cpio-2.8-3.8 [ 6s] [12/115] cumulate db4-4.8.30-1.4 [ 6s] [13/115] cumulate diffutils-3.0-1.1 [ 6s] [14/115] cumulate e2fsprogs-libs-1.41.9-4.4 [ 6s] [15/115] cumulate elfutils-libelf-0.152-1.8 [ 6s] [16/115] cumulate expat-2.0.1-1.4 [ 6s] [17/115] cumulate fdupes-1.40-1.1 [ 6s] [18/115] cumulate findutils-4.2.31-4.6 [ 6s] [19/115] cumulate gdbm-1.8.3-1.7 [ 6s] [20/115] cumulate libatomic-4.9.2-2015.02.1.7 [ 6s] [21/115] cumulate libattr-2.4.44-1.3 [ 6s] [22/115] cumulate libgomp-4.9.2-2015.02.1.7 [ 6s] [23/115] cumulate libitm-4.9.2-2015.02.1.7 [ 6s] [24/115] cumulate liblua-5.1.4-1.3 [ 6s] [25/115] cumulate libuuid-2.20.2-2.19 [ 6s] [26/115] cumulate m4-1.4.14-2.27 [ 6s] [27/115] cumulate net-tools-1.60-2.1 [ 6s] [28/115] cumulate nspr-4.9-1.4 [ 6s] [29/115] cumulate nss-softokn-freebl-3.12.9-1.9 [ 6s] [30/115] cumulate openssl-1.0.1p-3.27 [ 6s] [31/115] cumulate patch-2.6-1.1 [ 6s] [32/115] cumulate pkg-config-0.25-2.1 [ 6s] [33/115] cumulate popt-1.16-1.4 [ 6s] [34/115] cumulate readline-5.2-1.3 [ 6s] [35/115] cumulate sed-4.1.5-1.1 [ 6s] [36/115] cumulate sqlite-3.8.10.2-1.4 [ 6s] [37/115] cumulate xz-libs-5.0.3-1.4 [ 6s] [38/115] cumulate zlib-1.2.8-1.4 [ 6s] [39/115] cumulate libvtv-4.9.2-2015.02.1.7 [ 6s] [40/115] cumulate libasan-4.9.2-2015.02.1.7 [ 6s] [41/115] cumulate libpcre-7.7-1.9 [ 6s] [42/115] cumulate libubsan-4.9.2-2015.02.1.7 [ 6s] [43/115] cumulate ncurses-libs-5.7-1.4 [ 6s] [44/115] cumulate patchelf-0.5.svn20809-1.1 [ 6s] [45/115] cumulate build-compare-2009.10.14-1.1 [ 6s] [46/115] cumulate cpp-4.9.2-2015.02.1.7 [ 6s] [47/115] cumulate glibc-headers-2.20-2014.11.1.4 [ 6s] [48/115] cumulate grep-2.5.1a-1.1 [ 7s] [49/115] cumulate libacl-2.2.49-1.1 [ 7s] [50/115] cumulate libcap-2.21-1.3 [ 7s] [51/115] cumulate libfile-5.04-1.2 [ 7s] [52/115] cumulate libpython-2.7.1-1.1 [ 7s] [53/115] cumulate libxml2-2.9.2-1.1 [ 7s] [54/115] cumulate make-3.82-154.2.28 [ 7s] [55/115] cumulate ncurses-5.7-1.4 [ 7s] [56/115] cumulate pcre-7.7-1.9 [ 7s] [57/115] cumulate psmisc-22.20-1.3 [ 7s] [58/115] cumulate unzip-6.0-1.6 [ 7s] [59/115] cumulate binutils-2.25.0-2015.01.1.4 [ 7s] [60/115] cumulate bzip2-1.0.5-1.4 [ 7s] [61/115] cumulate libblkid-2.20.2-2.19 [ 7s] [62/115] cumulate xz-5.0.3-1.4 [ 7s] [63/115] cumulate elfutils-libs-0.152-1.8 [ 7s] [64/115] cumulate nss-3.12.9-1.9 [ 7s] [65/115] cumulate perl-5.12.1-1.9 [ 7s] [66/115] cumulate ncurses-base-5.7-1.4 [ 7s] [67/115] cumulate perl-Devel-Symdump-2.08-1.1 [ 7s] [68/115] cumulate perl-IO-Compress-Base-2.008-1.9 [ 7s] [69/115] cumulate perl-Module-Pluggable-3.60-1.9 [ 7s] [70/115] cumulate perl-Package-Constants-0.01-1.9 [ 7s] [71/115] cumulate perl-Pod-Escapes-1.04-1.9 [ 7s] [72/115] cumulate perl-TimeDate-1.20-1.1 [ 7s] [73/115] cumulate file-5.04-1.2 [ 7s] [74/115] cumulate glibc-devel-2.20-2014.11.1.4 [ 7s] [75/115] cumulate perl-Compress-Raw-Zlib-2.008-1.9 [ 7s] [76/115] cumulate perl-libs-5.12.1-1.9 [ 7s] [77/115] cumulate tar-1.17-3.4 [ 7s] [78/115] cumulate coreutils-6.9-2.17 [ 7s] [79/115] cumulate libmount-2.20.2-2.19 [ 7s] [80/115] cumulate perl-devel-5.12.1-1.9 [ 7s] [81/115] cumulate xz-lzma-compat-5.0.3-1.4 [ 7s] [82/115] cumulate nss-sysinit-3.12.9-1.9 [ 7s] [83/115] cumulate python-base-2.7.1-1.1 [ 7s] [84/115] cumulate elfutils-0.152-1.8 [ 7s] [85/115] cumulate glibc-common-2.20-2014.11.1.4 [ 7s] [86/115] cumulate libarchive-2.8.3-2.17 [ 7s] [87/115] cumulate rpm-libs-4.9.1-4.3.1.4 [ 7s] [88/115] cumulate libstdc++-devel-4.9.2-2015.02.1.7 [ 7s] [89/115] cumulate perl-ExtUtils-CBuilder-0.21-1.9 [ 7s] [90/115] cumulate perl-ExtUtils-ParseXS-2.18-1.9 [ 7s] [91/115] cumulate perl-Pod-Simple-3.07-1.9 [ 7s] [92/115] cumulate perl-Test-Simple-0.80-1.9 [ 7s] [93/115] cumulate gawk-3.1.5-1.1 [ 7s] [94/115] cumulate gzip-1.3.12-3.8 [ 7s] [95/115] cumulate perl-IO-Compress-Zlib-2.008-1.9 [ 7s] [96/115] cumulate perl-Test-Harness-3.12-1.9 [ 7s] [97/115] cumulate rpm-4.9.1-4.3.1.4 [ 7s] [98/115] cumulate build-2011.01.10a-1.1 [ 7s] [99/115] cumulate util-linux-2.20.2-2.19 [ 7s] [100/115] cumulate cmake-2.8.5-1.2.25 [ 7s] [101/115] cumulate python-2.7.1-2.15 [ 7s] [102/115] cumulate gcc-4.9.2-2015.02.1.7 [ 7s] [103/115] cumulate perl-ExtUtils-MakeMaker-6.36-1.9 [ 7s] [104/115] cumulate perl-Test-Pod-1.42-1.1 [ 7s] [105/115] cumulate gcc-c++-4.9.2-2015.02.1.7 [ 7s] [106/115] cumulate perl-Compress-Zlib-2.008-1.9 [ 7s] [107/115] cumulate rpm-build-4.9.1-4.3.1.4 [ 7s] [108/115] cumulate perl-IO-Zlib-1.07-1.9 [ 7s] [109/115] cumulate perl-CPAN-1.9205-1.9 [ 7s] [110/115] cumulate autoconf-2.68-1.1 [ 7s] [111/115] cumulate automake-1.11.1-1.1 [ 7s] [112/115] cumulate perl-Archive-Tar-1.38-1.9 [ 7s] [113/115] cumulate libtool-2.2.6b-1.4 [ 7s] [114/115] cumulate perl-Module-Build-0.2808-1.9 [ 7s] [115/115] now installing cumulated packages [ 7s] Preparing... ################################################## [ 8s] setup ################################################## [ 8s] filesystem ################################################## [ 8s] tzdata ################################################## [ 8s] tizen-release ################################################## [ 8s] kernel-headers ################################################## [ 8s] bash ################################################## [ 8s] findutils ################################################## [ 8s] grep ################################################## [ 8s] coreutils ################################################## [ 8s] glibc-common ################################################## [ 8s] libgcc ################################################## [ 8s] /sbin/ldconfig: relative path `1' used to build cache [ 8s] warning: %post(libgcc-4.9.2-2015.02.1.7.i586) scriptlet failed, exit status 1 [ 8s] glibc ################################################## [ 8s] libstdc++ ################################################## [ 8s] libattr ################################################## [ 8s] libacl ################################################## [ 8s] libpcre ################################################## [ 8s] glibc-headers ################################################## [ 8s] glibc-devel ################################################## [ 8s] libstdc++-devel ################################################## [ 8s] build-compare ################################################## [ 8s] zlib ################################################## [ 8s] bzip2-libs ################################################## [ 8s] elfutils-libelf ################################################## [ 8s] xz-libs ################################################## [ 8s] ncurses-libs ################################################## [ 8s] ncurses ################################################## [ 8s] ncurses-base ################################################## [ 8s] binutils ################################################## [ 8s] libuuid ################################################## [ 9s] popt ################################################## [ 9s] libblkid ################################################## [ 9s] xz ################################################## [ 9s] libfile ################################################## [ 9s] nspr ################################################## [ 9s] openssl ################################################## [ 9s] sed ################################################## [ 9s] sqlite ################################################## [ 9s] libpython ################################################## [ 9s] python-base ################################################## [ 9s] file ################################################## [ 9s] xz-lzma-compat ################################################## [ 9s] libmount ################################################## [ 9s] elfutils-libs ################################################## [ 9s] elfutils ################################################## [ 9s] bzip2 ################################################## [ 9s] cpp ################################################## [ 9s] libxml2 ################################################## [ 9s] libarchive ################################################## [ 9s] tar ################################################## [ 9s] libcap ################################################## [ 9s] libasan ################################################## [ 9s] libubsan ################################################## [ 9s] cpio ################################################## [ 9s] db4 ################################################## [ 9s] diffutils ################################################## [ 9s] expat ################################################## [ 9s] gdbm ################################################## [ 9s] perl-Pod-Escapes ################################################## [ 9s] perl-Compress-Raw-Zlib ################################################## [ 9s] perl-IO-Compress-Base ################################################## [ 9s] perl-Module-Pluggable ################################################## [ 9s] perl-Pod-Simple ################################################## [ 9s] perl-IO-Compress-Zlib ################################################## [ 9s] perl-libs ################################################## [ 10s] perl ################################################## [ 10s] perl-ExtUtils-ParseXS ################################################## [ 10s] perl-devel ################################################## [ 10s] perl-ExtUtils-MakeMaker ################################################## [ 10s] perl-Test-Harness ################################################## [ 10s] perl-CPAN ################################################## [ 10s] perl-Compress-Zlib ################################################## [ 10s] perl-IO-Zlib ################################################## [ 10s] perl-ExtUtils-CBuilder ################################################## [ 10s] perl-Test-Simple ################################################## [ 10s] perl-Package-Constants ################################################## [ 10s] perl-Archive-Tar ################################################## [ 10s] perl-TimeDate ################################################## [ 10s] libatomic ################################################## [ 10s] libgomp ################################################## [ 10s] libitm ################################################## [ 10s] liblua ################################################## [ 10s] m4 ################################################## [ 10s] autoconf ################################################## [ 10s] automake ################################################## [ 10s] nss-softokn-freebl ################################################## [ 10s] nss ################################################## [ 10s] nss-sysinit ################################################## [ 10s] rpm-libs ################################################## [ 10s] rpm ################################################## [ 10s] patch ################################################## [ 10s] pkg-config ################################################## [ 10s] readline ################################################## [ 10s] libvtv ################################################## [ 10s] gcc ################################################## [ 10s] unzip ################################################## [ 11s] gawk ################################################## [ 11s] gzip ################################################## [ 11s] libtool ################################################## [ 11s] build ################################################## [ 11s] perl-Module-Build ################################################## [ 11s] perl-Test-Pod ################################################## [ 11s] perl-Devel-Symdump ################################################## [ 11s] rpm-build ################################################## [ 11s] gcc-c++ ################################################## [ 11s] python ################################################## [ 11s] cmake ################################################## [ 11s] util-linux ################################################## [ 11s] psmisc ################################################## [ 11s] pcre ################################################## [ 11s] patchelf ################################################## [ 11s] e2fsprogs-libs ################################################## [ 11s] fdupes ################################################## [ 11s] net-tools ################################################## [ 11s] make ################################################## [ 11s] removing nis flags from //etc/nsswitch.conf... [ 11s] now finalizing build dir... [ 11s] Warning: spec file parser line 11: can't expand %(...) [ 11s] Warning: spec file parser line 16: can't expand %(...) [ 11s] Warning: spec file parser line 51: can't expand %(...) [ 12s] ----------------------------------------------------------------- [ 12s] I have the following modifications for perl-Pod-Coverage.spec: [ 12s] 5c5 [ 12s] < Release: 1 [ 12s] --- [ 12s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 12s] 53a54 [ 12s] > %changelog [ 12s] ----------------------------------------------------------------- [ 12s] ----- building perl-Pod-Coverage.spec (user abuild) [ 12s] ----------------------------------------------------------------- [ 12s] ----------------------------------------------------------------- [ 12s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.4:Base/emulator/28ecc0ae05d36d328403b94b3307d3ab-perl-Pod-Coverage' /home/abuild/rpmbuild/SOURCES/perl-Pod-Coverage.spec [ 12s] sh: @__ID_U@: command not found [ 12s] sh: @__ID_U@: command not found [ 12s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.0B5ePH [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + LANG=C [ 12s] + export LANG [ 12s] + unset DISPLAY [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + rm -rf Pod-Coverage-0.20 [ 12s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Pod-Coverage-0.20.tar.gz [ 12s] + /bin/tar -xf - [ 12s] + STATUS=0 [ 12s] + '[' 0 -ne 0 ']' [ 12s] + cd Pod-Coverage-0.20 [ 12s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 12s] + exit 0 [ 12s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.d2snfg [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + cd Pod-Coverage-0.20 [ 12s] + LANG=C [ 12s] + export LANG [ 12s] + unset DISPLAY [ 12s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 12s] + export CFLAGS [ 12s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 12s] + export CXXFLAGS [ 12s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -fdiagnostics-color=never -Wl,--as-needed -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 12s] + export FFLAGS [ 12s] + LD_AS_NEEDED=1 [ 12s] + export LD_AS_NEEDED [ 12s] + /usr/bin/perl Build.PL installdirs=vendor [ 12s] Creating new 'MYMETA.yml' with configuration results [ 12s] Creating new 'Build' script for 'Pod-Coverage' version '0.20' [ 12s] + ./Build [ 12s] Building Pod-Coverage [ 12s] + exit 0 [ 12s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aBTNYP [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + cd Pod-Coverage-0.20 [ 12s] + LANG=C [ 12s] + export LANG [ 12s] + unset DISPLAY [ 12s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 12s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 12s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 12s] + ./Build install destdir=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 create_packlist=0 [ 12s] Building Pod-Coverage [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage.pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage/Overloader.pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage/CountParents.pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage/ExportOnly.pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/man/man3/Pod::Coverage::ExportOnly.3pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/man/man3/Pod::Coverage::Overloader.3pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/man/man3/Pod::Coverage::CountParents.3pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/man/man3/Pod::Coverage.3pm [ 12s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/bin/pod_cover [ 12s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 -depth -type d -exec rmdir '{}' ';' [ 12s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/Pod-Coverage-0.20 [ 12s] + /usr/lib/rpm/check-buildroot [ 12s] + /usr/lib/rpm//brp-compress [ 12s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 12s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 12s] + /usr/lib/rpm/brp-python-hardlink [ 12s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 12s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.58BrHq [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + cd Pod-Coverage-0.20 [ 12s] + unset DISPLAY [ 12s] + ./Build test [ 13s] t/01compile.t ..... ok [ 13s] t/02simple.t ...... ok [ 13s] t/03import.t ...... ok [ 13s] t/04cvgv.t ........ ok [ 13s] t/05parentage.t ... ok [ 13s] t/06trustme.t ..... ok [ 13s] t/07pod.t ......... ok [ 13s] t/08tie.t ......... ok [ 13s] t/09whitespace.t .. ok [ 13s] All tests successful. [ 13s] Files=9, Tests=71, 1 wallclock secs ( 0.04 usr 0.00 sys + 0.42 cusr 0.02 csys = 0.48 CPU) [ 13s] Result: PASS [ 13s] + exit 0 [ 13s] Processing files: perl-Pod-Coverage-0.20-1.1.noarch [ 13s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.sPJ9P3 [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + cd Pod-Coverage-0.20 [ 13s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/doc/perl-Pod-Coverage-0.20 [ 13s] + export DOCDIR [ 13s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/doc/perl-Pod-Coverage-0.20 [ 13s] + cp -pr Changes examples/ /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386/usr/share/doc/perl-Pod-Coverage-0.20 [ 13s] + exit 0 [ 13s] Provides: perl(Pod::Coverage) = 0.20 perl(Pod::Coverage::CountParents) perl(Pod::Coverage::ExportOnly) perl(Pod::Coverage::Extractor) perl(Pod::Coverage::Overloader) [ 13s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 13s] Requires: /usr/bin/perl perl(B) perl(Devel::Symdump) perl(Pod::Coverage) perl(Pod::Find) perl(Pod::Parser) perl(base) perl(constant) perl(lib) perl(strict) perl(vars) [ 13s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 13s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Pod-Coverage-0.20-1.1.src.rpm [ 13s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Pod-Coverage-0.20-1.1.noarch.rpm [ 13s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DRku3X [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + cd Pod-Coverage-0.20 [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.i386 [ 13s] + exit 0 [ 13s] ... checking for files with abuild user/group [ 13s] ... creating baselibs [ 13s] ... saving built statistics [ 13s] ... saving built packages [ 13s] /home/abuild/rpmbuild/RPMS/noarch/perl-Pod-Coverage-0.20-1.1.noarch.rpm [ 13s] /home/abuild/rpmbuild/SRPMS/perl-Pod-Coverage-0.20-1.1.src.rpm [ 13s] /home/abuild/rpmbuild/OTHER/_statistics [ 13s] [ 13s] w18 finished "build perl-Pod-Coverage.spec" at Mon Oct 26 16:49:47 UTC 2015. [ 13s] [ 16s] /.build/build: line 368: 214 Killed background_monitor_process [ 18s] [ 13.270555] SysRq : Power Off [ 18s] [ 13.278581] Power down. [ 18s] build: extracting built packages... [ 18s] perl-Pod-Coverage-0.20-1.1.noarch.rpm [ 18s] perl-Pod-Coverage-0.20-1.1.src.rpm [ 18s] _statistics Retried build at Mon Oct 26 11:37:17 2015 returned same result, skipped Retried build at Tue Oct 27 07:46:25 2015 returned same result, skipped