[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:gperf.spec" at Tue Oct 27 15:30:50 UTC 2015. [ 0s] [ 0s] Building gperf for project 'Tizen:2.4:Base' repository 'standard' arch 'armv7l' srcmd5 'b2395b3cdc871e58c9e20aec5e8b7710' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:gperf.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:gperf.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:gperf.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 0s] [6/52] preinstalling libattr... [ 0s] [7/52] preinstalling libacl... [ 0s] [8/52] preinstalling bash... [ 0s] [9/52] preinstalling bzip2-libs... [ 0s] [10/52] preinstalling diffutils... [ 0s] [11/52] preinstalling elfutils-libelf... [ 0s] [12/52] preinstalling libcap... [ 0s] [13/52] preinstalling liblua... [ 0s] [14/52] preinstalling libstdc++... [ 0s] [15/52] preinstalling ncurses-libs... [ 0s] [16/52] preinstalling nspr... [ 0s] [17/52] preinstalling nss-softokn-freebl... [ 0s] [18/52] preinstalling popt... [ 0s] [19/52] preinstalling readline... [ 0s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 1s] [47/52] preinstalling zlib-x86-arm... [ 1s] [48/52] preinstalling rpm-libs... [ 1s] [49/52] preinstalling bash-x86-arm... [ 1s] [50/52] preinstalling rpm-libs-x86-arm... [ 1s] [51/52] preinstalling rpm... [ 1s] [52/52] preinstalling rpm-x86-arm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> glibc -> glibc-common [ 2s] breaking dependency glibc-common -> bash [ 2s] cycle: bash -> glibc -> glibc-common -> coreutils [ 2s] breaking dependency glibc-common -> coreutils [ 2s] cycle: glibc -> glibc-common -> findutils [ 2s] breaking dependency glibc-common -> findutils [ 2s] cycle: glibc -> glibc-common [ 2s] breaking dependency glibc-common -> glibc [ 2s] cycle: glibc -> glibc-common -> grep [ 2s] breaking dependency grep -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libgcc [ 2s] breaking dependency grep -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> glibc [ 2s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency glibc -> glibc-common [ 2s] cycle: glibc -> libgcc [ 2s] breaking dependency libgcc -> glibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: nss -> nss-sysinit [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 9s] booting kvm ... [ 9s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 11s] [ 0.000000] tsc: Fast TSC calibration failed [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 16s] Waiting for device /dev/vda to appear: ok [ 16s] fsck from util-linux 2.21.2 [ 16s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 16s] /dev/vda: clean, 4677/2392064 files, 223522/9568256 blocks [ 16s] fsck succeeded. Mounting root device read-write. [ 16s] Mounting root /dev/vda [ 16s] mount -o rw -t ext4 /dev/vda /root [ 17s] replacing /etc/mtab with symlink to /proc/self/mounts [ 17s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 17s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 17s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 17s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 17s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 17s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 18s] 2nd stage started in virtual machine [ 18s] machine type: armv7l [ 18s] swapon on /dev/vdb [ 18s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 18s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 18s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 19s] logging output to //.build.log... [ 19s] processing specfile /.build-srcdir/_service:gbs:gperf.spec ... [ 19s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:gperf.spec build rpmlint-Factory ... [ 19s] running rpm-x86-arm postinstall script [ 19s] running rpm-libs-x86-arm postinstall script [ 19s] running tizen-accelerator postinstall script [ 20s] running glibc-x86-arm postinstall script [ 20s] running bash-x86-arm postinstall script [ 20s] initializing rpm db... [ 25s] [1/165] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 25s] [2/165] cumulate kernel-headers-3.4.91-1.1 [ 25s] [3/165] cumulate tizen-release-2.2.0-1.1 [ 25s] [4/165] cumulate tzdata-2014j-1.1 [ 25s] [5/165] cumulate libgcc-4.9.2-2015.02.1.11 [ 26s] [6/165] cumulate setup-0.2-1.1 [ 26s] [7/165] cumulate filesystem-0.1-1.1 [ 26s] [8/165] cumulate glibc-2.20-2014.11.1.10 [ 26s] [9/165] cumulate libstdc++-4.9.2-2015.02.1.11 [ 27s] [10/165] cumulate libatomic-4.9.2-2015.02.1.11 [ 27s] [11/165] cumulate libgomp-4.9.2-2015.02.1.11 [ 27s] [12/165] cumulate openssl-1.0.1p-1.4 [ 28s] [13/165] cumulate bash-4.1-1.5 [ 28s] [14/165] cumulate bzip2-libs-1.0.5-1.8 [ 28s] [15/165] cumulate cpio-2.8-1.5 [ 28s] [16/165] cumulate db4-4.8.30-1.8 [ 28s] [17/165] cumulate diffutils-3.0-1.5 [ 29s] [18/165] cumulate e2fsprogs-libs-1.41.9-1.3 [ 30s] [19/165] cumulate elfutils-libelf-0.152-1.12 [ 31s] [20/165] cumulate expat-2.0.1-1.8 [ 32s] [21/165] cumulate fdupes-1.40-1.4 [ 32s] [22/165] cumulate findutils-4.2.31-1.4 [ 32s] [23/165] cumulate gdbm-1.8.3-1.12 [ 33s] [24/165] cumulate libattr-2.4.44-1.8 [ 33s] [25/165] cumulate libitm-4.9.2-2015.02.1.11 [ 33s] [26/165] cumulate liblua-5.1.4-1.6 [ 33s] [27/165] cumulate libuuid-2.20.2-1.3 [ 33s] [28/165] cumulate m4-1.4.14-1.4 [ 33s] [29/165] cumulate net-tools-1.60-2.5 [ 34s] [30/165] cumulate nspr-4.9-1.9 [ 34s] [31/165] cumulate nss-softokn-freebl-3.12.9-1.17 [ 34s] [32/165] cumulate patch-2.6-1.5 [ 34s] [33/165] cumulate pkg-config-0.25-2.5 [ 34s] [34/165] cumulate popt-1.16-1.8 [ 35s] [35/165] cumulate readline-5.2-1.6 [ 35s] [36/165] cumulate ruby-1.9.2-1.5 [ 36s] [37/165] cumulate sed-4.1.5-1.4 [ 36s] [38/165] cumulate sqlite-3.8.10.2-1.8 [ 36s] [39/165] cumulate xz-libs-5.0.3-1.8 [ 36s] [40/165] cumulate zlib-1.2.8-1.8 [ 37s] [41/165] cumulate libasan-4.9.2-2015.02.1.11 [ 37s] [42/165] cumulate libpcre-7.7-1.25 [ 37s] [43/165] cumulate libubsan-4.9.2-2015.02.1.11 [ 37s] [44/165] cumulate patchelf-0.5.svn20809-1.4 [ 37s] [45/165] cumulate ncurses-libs-5.7-1.8 [ 38s] [46/165] cumulate build-compare-2009.10.14-1.5 [ 38s] [47/165] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 38s] [48/165] cumulate cpp-4.9.2-2015.02.1.11 [ 38s] [49/165] cumulate glibc-headers-2.20-2014.11.1.10 [ 38s] [50/165] cumulate libcap-2.21-1.6 [ 38s] [51/165] cumulate unzip-6.0-1.12 [ 39s] [52/165] cumulate grep-2.5.1a-1.4 [ 39s] [53/165] cumulate libacl-2.2.49-1.4 [ 39s] [54/165] cumulate libfile-5.04-1.7 [ 39s] [55/165] cumulate libpython-2.7.1-1.5 [ 39s] [56/165] cumulate libxml2-2.9.2-1.3 [ 39s] [57/165] cumulate make-3.82-154.1.5 [ 39s] [58/165] cumulate ncurses-5.7-1.8 [ 40s] [59/165] cumulate pcre-7.7-1.25 [ 40s] [60/165] cumulate psmisc-22.20-1.6 [ 40s] [61/165] cumulate binutils-2.25.0-2015.01.1.8 [ 40s] [62/165] cumulate bzip2-1.0.5-1.8 [ 40s] [63/165] cumulate libblkid-2.20.2-1.3 [ 40s] [64/165] cumulate xz-5.0.3-1.8 [ 41s] [65/165] cumulate elfutils-libs-0.152-1.12 [ 41s] [66/165] cumulate nss-3.12.9-1.17 [ 41s] [67/165] cumulate perl-5.12.1-1.25 [ 41s] [68/165] cumulate ncurses-base-5.7-1.8 [ 41s] [69/165] cumulate perl-HTML-Tagset-3.20-1.1 [ 42s] [70/165] cumulate perl-IO-Compress-Base-2.008-1.25 [ 42s] [71/165] cumulate perl-Module-Pluggable-3.60-1.25 [ 42s] [72/165] cumulate perl-Pod-Escapes-1.04-1.25 [ 42s] [73/165] cumulate perl-TimeDate-1.20-1.1 [ 42s] [74/165] cumulate perl-URI-1.54-1.1 [ 42s] [75/165] cumulate glibc-devel-2.20-2014.11.1.10 [ 43s] [76/165] cumulate file-5.04-1.7 [ 43s] [77/165] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 43s] [78/165] cumulate perl-libs-5.12.1-1.25 [ 43s] [79/165] cumulate tar-1.17-1.6 [ 43s] [80/165] cumulate coreutils-6.9-1.5 [ 43s] [81/165] cumulate libmount-2.20.2-1.3 [ 43s] [82/165] cumulate xz-lzma-compat-5.0.3-1.8 [ 43s] [83/165] cumulate elfutils-0.152-1.12 [ 44s] [84/165] cumulate nss-sysinit-3.12.9-1.17 [ 44s] [85/165] cumulate python-base-2.7.1-1.5 [ 44s] [86/165] cumulate glibc-common-2.20-2014.11.1.10 [ 44s] [87/165] cumulate libarchive-2.8.3-1.1 [ 44s] [88/165] cumulate rpm-libs-4.9.1-4.3.1.10 [ 44s] [89/165] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 45s] [90/165] cumulate perl-Pod-Simple-3.07-1.25 [ 45s] [91/165] cumulate tizen-accelerator-1.0.1-1.1 [ 45s] [92/165] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 45s] [93/165] cumulate gawk-3.1.5-1.6 [ 45s] [94/165] cumulate gzip-1.3.12-1.5 [ 45s] [95/165] cumulate perl-HTML-Parser-3.65-1.4 [ 45s] [96/165] cumulate python-xml-2.7.1-1.5 [ 46s] [97/165] cumulate autoconf-2.68-1.1 [ 46s] [98/165] cumulate build-2011.01.10a-1.1 [ 46s] [99/165] installing rpm-4.9.1-4.3.1.10 [ 49s] [100/165] cumulate util-linux-2.20.2-1.3 [ 49s] [101/165] cumulate cmake-2.8.5-1.1.1 [ 50s] [102/165] cumulate python-2.7.1-1.2 [ 50s] [103/165] cumulate gcc-4.9.2-2015.02.1.11 [ 50s] [104/165] cumulate automake-1.11.1-1.1 [ 50s] [105/165] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 51s] [106/165] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 51s] [107/165] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 51s] [108/165] cumulate expat-x86-arm-2.0.1-1.4 [ 51s] [109/165] cumulate glibc-x86-arm-2.20-9.1.5 [ 51s] [110/165] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 51s] [111/165] cumulate libarchive-x86-arm-2.8.3-1.3 [ 52s] [112/165] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 52s] [113/165] cumulate libcap-x86-arm-2.21-9.1.4 [ 52s] [114/165] cumulate libfile-x86-arm-5.04-9.1.4 [ 52s] [115/165] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 52s] [116/165] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 52s] [117/165] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 53s] [118/165] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 53s] [119/165] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 53s] [120/165] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 53s] [121/165] cumulate nspr-x86-arm-4.9-9.1.5 [ 54s] [122/165] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 54s] [123/165] cumulate nss-x86-arm-3.12.9-9.1.5 [ 54s] [124/165] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 54s] [125/165] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 54s] [126/165] cumulate popt-x86-arm-1.16-9.1.4 [ 54s] [127/165] cumulate python-x86-arm-2.7.1-9.1.3 [ 54s] [128/165] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 54s] [129/165] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 55s] [130/165] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 55s] [131/165] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 55s] [132/165] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 55s] [133/165] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 55s] [134/165] cumulate perl-Compress-Zlib-2.008-1.25 [ 56s] [135/165] cumulate rpm-build-4.9.1-4.3.1.10 [ 56s] [136/165] cumulate bash-x86-arm-4.1-9.1.4 [ 56s] [137/165] cumulate diffutils-x86-arm-3.0-9.1.4 [ 56s] [138/165] cumulate fdupes-x86-arm-1.40-9.1.4 [ 56s] [139/165] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 56s] [140/165] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 56s] [141/165] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 56s] [142/165] cumulate libtool-2.2.6b-1.8 [ 56s] [143/165] cumulate m4-x86-arm-1.4.14-9.1.4 [ 56s] [144/165] cumulate make-x86-arm-3.82-9.1.3 [ 56s] [145/165] cumulate patch-x86-arm-2.6-9.1.4 [ 56s] [146/165] cumulate perl-libwww-perl-5.836-1.1 [ 56s] [147/165] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 56s] [148/165] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 56s] [149/165] cumulate sed-x86-arm-4.1.5-9.1.4 [ 56s] [150/165] cumulate bzip2-x86-arm-1.0.5-1.4 [ 56s] [151/165] cumulate perl-x86-arm-5.12.1-9.1.5 [ 56s] [152/165] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 56s] [153/165] cumulate coreutils-x86-arm-6.9-9.1.4 [ 56s] [154/165] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.5 [ 56s] [155/165] cumulate file-x86-arm-5.04-9.1.4 [ 56s] [156/165] cumulate tar-x86-arm-1.17-9.1.4 [ 56s] [157/165] cumulate elfutils-x86-arm-0.152-9.1.4 [ 57s] [158/165] cumulate cmake-x86-arm-2.8.5-1.3 [ 57s] [159/165] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 57s] [160/165] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 57s] [161/165] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 57s] [162/165] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 57s] [163/165] cumulate perl-XML-Parser-2.36-1.5 [ 57s] [164/165] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 57s] [165/165] now installing cumulated packages [ 57s] Preparing... ################################################## [ 57s] setup ################################################## [ 57s] filesystem ################################################## [ 58s] tzdata ################################################## [ 58s] tizen-release ################################################## [ 58s] kernel-headers ################################################## [ 58s] cross-armv7l-platformfile ################################################## [ 58s] bash ################################################## [ 58s] findutils ################################################## [ 58s] grep ################################################## [ 58s] coreutils ################################################## [ 58s] glibc-common ################################################## [ 58s] libgcc ################################################## [ 58s] /sbin/ldconfig: relative path `1' used to build cache [ 58s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 58s] glibc ################################################## [ 58s] libstdc++ ################################################## [ 58s] libattr ################################################## [ 59s] libacl ################################################## [ 59s] libpcre ################################################## [ 59s] tizen-accelerator ################################################## [ 59s] glibc-x86-arm ################################################## [ 59s] libattr-x86-arm ################################################## [ 59s] libacl-x86-arm ################################################## [ 59s] libgcc-x86-arm ################################################## [ 60s] libstdc++-x86-arm ################################################## [ 60s] glibc-headers ################################################## [ 60s] glibc-devel ################################################## [ 60s] libstdc++-devel ################################################## [ 60s] coreutils-x86-arm ################################################## [ 63s] bash-x86-arm ################################################## [ 63s] findutils-x86-arm ################################################## [ 63s] build-compare ################################################## [ 63s] qemu-linux-user-x86-arm ################################################## [ 63s] zlib ################################################## [ 63s] zlib-x86-arm ################################################## [ 63s] bzip2-libs ################################################## [ 63s] bzip2-libs-x86-arm ################################################## [ 63s] elfutils-libelf ################################################## [ 63s] xz-libs ################################################## [ 63s] ncurses-libs ################################################## [ 63s] ncurses ################################################## [ 64s] ncurses-base ################################################## [ 64s] binutils ################################################## [ 64s] libpython ################################################## [ 64s] xz-libs-x86-arm ################################################## [ 64s] elfutils-libelf-x86-arm ################################################## [ 64s] python-base ################################################## [ 64s] libfile ################################################## [ 64s] openssl ################################################## [ 64s] expat ################################################## [ 64s] libuuid ################################################## [ 64s] nspr ################################################## [ 64s] popt ################################################## [ 64s] sed ################################################## [ 64s] sqlite ################################################## [ 64s] popt-x86-arm ################################################## [ 64s] nspr-x86-arm ################################################## [ 65s] libfile-x86-arm ################################################## [ 65s] libblkid ################################################## [ 65s] file ################################################## [ 65s] xz ################################################## [ 65s] elfutils-libs ################################################## [ 65s] elfutils ################################################## [ 65s] bzip2 ################################################## [ 65s] libxml2 ################################################## [ 65s] libarchive ################################################## [ 65s] tar ################################################## [ 65s] libcap ################################################## [ 65s] libcap-x86-arm ################################################## [ 65s] diffutils ################################################## [ 65s] liblua ################################################## [ 65s] liblua-x86-arm ################################################## [ 65s] m4 ################################################## [ 65s] nss-softokn-freebl ################################################## [ 65s] nss ################################################## [ 65s] nss-sysinit ################################################## [ 65s] nss-x86-arm ################################################## [ 65s] rpm-libs ################################################## [ 65s] rpm-libs-x86-arm ################################################## [ 65s] patch ################################################## [ 65s] pkg-config ################################################## [ 65s] gawk ################################################## [ 65s] gzip ################################################## [ 65s] libarchive-x86-arm ################################################## [ 65s] libxml2-x86-arm ################################################## [ 65s] elfutils-libs-x86-arm ################################################## [ 65s] openssl-x86-arm ################################################## [ 65s] libpython-x86-arm ################################################## [ 66s] cmake ################################################## [ 66s] xz-lzma-compat ################################################## [ 66s] libmount ################################################## [ 66s] python-xml ################################################## [ 66s] cpp ################################################## [ 66s] libasan ################################################## [ 66s] libubsan ################################################## [ 66s] libatomic ################################################## [ 66s] libgomp ################################################## [ 66s] cpio ################################################## [ 66s] db4 ################################################## [ 66s] fdupes ################################################## [ 66s] gdbm ################################################## [ 66s] perl-Pod-Escapes ################################################## [ 66s] perl-Compress-Raw-Zlib ################################################## [ 66s] perl-IO-Compress-Base ################################################## [ 66s] perl-Module-Pluggable ################################################## [ 66s] perl-Pod-Simple ################################################## [ 66s] perl-IO-Compress-Zlib ################################################## [ 66s] perl-libs ################################################## [ 68s] perl ################################################## [ 68s] perl-URI ################################################## [ 69s] autoconf ################################################## [ 69s] automake ################################################## [ 69s] perl-HTML-Tagset ################################################## [ 69s] perl-TimeDate ################################################## [ 69s] perl-Compress-Zlib ################################################## [ 69s] perl-libs-x86-arm ################################################## [ 70s] perl-x86-arm ################################################## [ 70s] perl-HTML-Parser ################################################## [ 70s] perl-libwww-perl ################################################## [ 70s] perl-XML-Parser ################################################## [ 70s] libitm ################################################## [ 71s] gcc ################################################## [ 71s] gcc-c++ ################################################## [ 72s] cross-armv7l-gcc-accel-x86-a################################################## [ 72s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 72s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 72s] readline ################################################## [ 72s] python ################################################## [ 73s] ruby ################################################## [ 73s] unzip ################################################## [ 73s] rpm-build ################################################## [ 73s] make ################################################## [ 73s] make-x86-arm ################################################## [ 73s] rpm-build-x86-arm ################################################## [ 73s] ruby-x86-arm ################################################## [ 73s] python-x86-arm ################################################## [ 74s] cross-armv7l-binutils-accel-################################################## [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 74s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 75s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 75s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 75s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 75s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 75s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 75s] perl-XML-Parser-x86-arm ################################################## [ 75s] perl-HTML-Parser-x86-arm ################################################## [ 75s] build ################################################## [ 75s] libtool ################################################## [ 75s] fdupes-x86-arm ################################################## [ 75s] python-xml-x86-arm ################################################## [ 75s] cmake-x86-arm ################################################## [ 76s] python-base-x86-arm ################################################## [ 77s] elfutils-x86-arm ################################################## [ 77s] gzip-x86-arm ################################################## [ 77s] gawk-x86-arm ################################################## [ 77s] pkg-config-x86-arm ################################################## [ 77s] patch-x86-arm ################################################## [ 77s] rpm-x86-arm ################################################## [ 77s] /bin/rpm.orig-arm already present - skipping. [ 77s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 77s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 77s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 77s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 77s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 77s] nss-softokn-freebl-x86-arm ################################################## [ 77s] m4-x86-arm ################################################## [ 77s] diffutils-x86-arm ################################################## [ 77s] tar-x86-arm ################################################## [ 77s] bzip2-x86-arm ################################################## [ 77s] file-x86-arm ################################################## [ 78s] sqlite-x86-arm ################################################## [ 78s] sed-x86-arm ################################################## [ 78s] expat-x86-arm ################################################## [ 78s] ncurses-libs-x86-arm ################################################## [ 78s] util-linux ################################################## [ 78s] psmisc ################################################## [ 78s] pcre ################################################## [ 78s] patchelf ################################################## [ 78s] e2fsprogs-libs ################################################## [ 78s] net-tools ################################################## [ 79s] removing nis flags from //etc/nsswitch.conf... [ 79s] now finalizing build dir... [ 80s] build target is armv7l-tizen-linux [ 80s] ----------------------------------------------------------------- [ 80s] I have the following modifications for gperf.spec: [ 80s] 5c5 [ 80s] < Release: %{?release_prefix:%{release_prefix}.}1.41.%{?dist}%{!?dist:tizen} [ 80s] --- [ 80s] > Release: %{?release_prefix:%{release_prefix}.}1.6 [ 80s] ----------------------------------------------------------------- [ 80s] ----- building gperf.spec (user abuild) [ 80s] ----------------------------------------------------------------- [ 80s] ----------------------------------------------------------------- [ 80s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.4:Base/standard/b2395b3cdc871e58c9e20aec5e8b7710-gperf' /home/abuild/rpmbuild/SOURCES/gperf.spec [ 80s] Building target platforms: armv7l-tizen-linux [ 80s] Building for target armv7l-tizen-linux [ 80s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.35hUay [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + rm -rf gperf-3.0.4 [ 80s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/gperf-3.0.4.tar.gz [ 80s] + /bin/tar -xf - [ 80s] + STATUS=0 [ 80s] + '[' 0 -ne 0 ']' [ 80s] + cd gperf-3.0.4 [ 80s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 80s] + exit 0 [ 80s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.N87aIT [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd gperf-3.0.4 [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 80s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + LD_AS_NEEDED=1 [ 81s] + export LD_AS_NEEDED [ 81s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CFLAGS [ 81s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 81s] + export CXXFLAGS [ 81s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 81s] + export FFLAGS [ 81s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 81s] checking whether make sets $(MAKE)... yes [ 81s] configure: creating ./config.status [ 81s] config.status: creating Makefile [ 81s] === configuring in lib (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib) [ 81s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=armv7l-tizen-linux-gnueabi' '--host=armv7l-tizen-linux-gnueabi' '--target=armv7l-tizen-linux-gnueabi' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=armv7l-tizen-linux-gnueabi' 'host_alias=armv7l-tizen-linux-gnueabi' 'target_alias=armv7l-tizen-linux-gnueabi' --cache-file=/dev/null --srcdir=. [ 81s] checking whether make sets $(MAKE)... yes [ 81s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 81s] checking for C compiler default output file name... a.out [ 81s] checking whether the C compiler works... yes [ 81s] checking whether we are cross compiling... no [ 82s] checking for suffix of executables... [ 82s] checking for suffix of object files... o [ 82s] checking whether we are using the GNU C compiler... yes [ 82s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 82s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 82s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 82s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 82s] checking whether we are using the GNU C++ compiler... yes [ 82s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 82s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 83s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 83s] checking for ranlib... ranlib [ 83s] checking for a BSD compatible install... /usr/bin/install -c [ 83s] configure: creating ./config.status [ 83s] config.status: creating Makefile [ 83s] === configuring in src (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src) [ 83s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=armv7l-tizen-linux-gnueabi' '--host=armv7l-tizen-linux-gnueabi' '--target=armv7l-tizen-linux-gnueabi' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=armv7l-tizen-linux-gnueabi' 'host_alias=armv7l-tizen-linux-gnueabi' 'target_alias=armv7l-tizen-linux-gnueabi' --cache-file=/dev/null --srcdir=. [ 83s] checking whether make sets $(MAKE)... yes [ 83s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 83s] checking for C compiler default output file name... a.out [ 83s] checking whether the C compiler works... yes [ 83s] checking whether we are cross compiling... no [ 83s] checking for suffix of executables... [ 83s] checking for suffix of object files... o [ 83s] checking whether we are using the GNU C compiler... yes [ 83s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 84s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 84s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 84s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 84s] checking whether we are using the GNU C++ compiler... yes [ 84s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 84s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 84s] checking for a BSD compatible install... /usr/bin/install -c [ 84s] checking for stack-allocated variable-size arrays... yes [ 84s] checking for rand in -lm... yes [ 85s] configure: creating ./config.status [ 85s] config.status: creating Makefile [ 85s] config.status: creating config.h [ 85s] === configuring in tests (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests) [ 85s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=armv7l-tizen-linux-gnueabi' '--host=armv7l-tizen-linux-gnueabi' '--target=armv7l-tizen-linux-gnueabi' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=armv7l-tizen-linux-gnueabi' 'host_alias=armv7l-tizen-linux-gnueabi' 'target_alias=armv7l-tizen-linux-gnueabi' --cache-file=/dev/null --srcdir=. [ 85s] checking whether make sets $(MAKE)... yes [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 85s] checking for C compiler default output file name... a.out [ 85s] checking whether the C compiler works... yes [ 85s] checking whether we are cross compiling... no [ 85s] checking for suffix of executables... [ 85s] checking for suffix of object files... o [ 85s] checking whether we are using the GNU C compiler... yes [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 86s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 86s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 86s] checking whether we are using the GNU C++ compiler... yes [ 86s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 86s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 86s] configure: creating ./config.status [ 86s] config.status: creating Makefile [ 86s] === configuring in doc (/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc) [ 86s] configure: running /bin/sh ./configure '--prefix=/usr' '--build=armv7l-tizen-linux-gnueabi' '--host=armv7l-tizen-linux-gnueabi' '--target=armv7l-tizen-linux-gnueabi' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=armv7l-tizen-linux-gnueabi' 'host_alias=armv7l-tizen-linux-gnueabi' 'target_alias=armv7l-tizen-linux-gnueabi' --cache-file=/dev/null --srcdir=. [ 87s] checking whether make sets $(MAKE)... yes [ 87s] checking for a BSD compatible install... /usr/bin/install -c [ 87s] configure: creating ./config.status [ 87s] config.status: creating Makefile [ 87s] + make -j4 [ 87s] cd lib; make all [ 87s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 87s] armv7l-tizen-linux-gnueabi-gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -c ./getopt.c [ 87s] armv7l-tizen-linux-gnueabi-gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -c ./getopt1.c [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -c ./getline.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -c ./hash.cc [ 87s] rm -f libgp.a [ 87s] ar rc libgp.a getopt.o getopt1.o getline.o hash.o [ 87s] ranlib libgp.a [ 87s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 87s] cd src; make all [ 87s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./version.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./positions.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./options.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./keyword.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./keyword-list.cc [ 87s] ./options.cc: In member function 'void Options::print_options() const': [ 87s] ./options.cc:282:27: warning: suggest parentheses around '&&' within '||' [-Wparentheses] [ 87s] if (*arg >= 'A' && *arg <= 'Z' || *arg >= 'a' && *arg <= 'z') [ 87s] ^ [ 87s] ./options.cc:294:34: warning: suggest parentheses around '&&' within '||' [-Wparentheses] [ 87s] while (*arg >= 'A' && *arg <= 'Z' || *arg >= 'a' && *arg <= 'z' || *arg == '-'); [ 87s] ^ [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./input.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./bool-array.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./hash-table.cc [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./search.cc [ 87s] ./search.cc: In member function 'void Search::prepare()': [ 87s] ./search.cc:162:6: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 87s] if (option[SEVENBIT]) [ 87s] ^ [ 87s] ./search.cc: In member function 'void Search::find_positions()': [ 87s] ./search.cc:417:16: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 87s] if (current.contains (i2) && !mandatory.contains (i2) && i2 != i1) [ 87s] ^ [ 87s] ./search.cc:415:12: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 87s] if (current.contains (i1) && !mandatory.contains (i1)) [ 87s] ^ [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./output.cc [ 87s] ./search.cc: In member function 'void Search::optimize()': [ 87s] ./search.cc:1638:6: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 87s] if (_alpha_unify) [ 87s] ^ [ 87s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I. -I./../lib -c ./main.cc [ 88s] armv7l-tizen-linux-gnueabi-g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -o gperf version.o positions.o options.o keyword.o keyword-list.o input.o bool-array.o hash-table.o search.o output.o main.o ../lib/libgp.a -lm [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 88s] cd tests; make all [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 88s] make[1]: Nothing to be done for `all'. [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 88s] cd doc; make all [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 88s] make[1]: Nothing to be done for `all'. [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 88s] + exit 0 [ 88s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UeQxuI [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd gperf-3.0.4 [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 88s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm install [ 88s] cd lib; /usr/bin/make install [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 88s] make[1]: Nothing to be done for `install'. [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/lib' [ 88s] cd src; /usr/bin/make install [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 88s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/bin [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/bin [ 88s] /usr/bin/install -c gperf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/bin/gperf [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/src' [ 88s] cd tests; /usr/bin/make install [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 88s] make[1]: Nothing to be done for `install'. [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/tests' [ 88s] cd doc; /usr/bin/make install [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 88s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/info [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/info [ 88s] /usr/bin/install -c -m 644 ./gperf.info /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/info/gperf.info [ 88s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/man/man1 [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/man [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/man/man1 [ 88s] /usr/bin/install -c -m 644 ./gperf.1 /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/man/man1/gperf.1 [ 88s] /bin/sh ./../mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc/ [ 88s] mkdir /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc [ 88s] /usr/bin/install -c -m 644 ./gperf.html /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc//gperf.html [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gperf-3.0.4/doc' [ 88s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/info/dir [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm -regex '.*\.la$' [ 88s] + xargs rm -f -- [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm -regex '.*\.a$' [ 88s] + xargs rm -f -- [ 88s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc/gperf.html [ 88s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/gperf-3.0.4 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/bin/gperf [ 88s] 588 blocks [ 89s] + /usr/lib/rpm/check-buildroot [ 89s] + /usr/lib/rpm//brp-compress [ 89s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 89s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 89s] + /usr/lib/rpm/brp-python-hardlink [ 89s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 89s] Processing files: gperf-3.0.4-1.6.armv7l [ 89s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.UPfxsz [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd gperf-3.0.4 [ 89s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc/gperf-3.0.4 [ 89s] + export DOCDIR [ 89s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc/gperf-3.0.4 [ 89s] + cp -pr NEWS README doc/gperf.html /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm/usr/share/doc/gperf-3.0.4 [ 89s] + exit 0 [ 89s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 89s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 89s] Processing files: gperf-debuginfo-3.0.4-1.6.armv7l [ 89s] Processing files: gperf-debugsource-3.0.4-1.6.armv7l [ 89s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 89s] Wrote: /home/abuild/rpmbuild/SRPMS/gperf-3.0.4-1.6.src.rpm [ 89s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gperf-3.0.4-1.6.armv7l.rpm [ 89s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gperf-debuginfo-3.0.4-1.6.armv7l.rpm [ 89s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gperf-debugsource-3.0.4-1.6.armv7l.rpm [ 89s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.KDnbyS [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd gperf-3.0.4 [ 89s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gperf-3.0.4-1.6.arm [ 89s] + exit 0 [ 89s] ... checking for files with abuild user/group [ 89s] ... creating baselibs [ 89s] ... comparing built packages with the former built [ 89s] /usr/lib/build/rpm-check.sh [ 89s] compare /.build.oldpackages/gperf-3.0.4-1.5.src.rpm /home/abuild/rpmbuild/SRPMS/gperf-3.0.4-1.6.src.rpm [ 90s] compare /.build.oldpackages/gperf-3.0.4-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/gperf-3.0.4-1.6.armv7l.rpm [ 90s] /usr/bin/gperf differs in ELF sections [ 90s] --- /tmp/tmp.O4CFead8Zz 2015-10-27 15:32:19.621784377 +0000 [ 90s] +++ /tmp/tmp.X9UqmEy7pY 2015-10-27 15:32:19.637784376 +0000 [ 90s] @@ -9,8 +9,8 @@ [ 90s] 10158 00000000 02000000 06000000 20000000 ............ ... [ 90s] Contents of section .note.gnu.build-id: [ 90s] 10168 04000000 14000000 03000000 474e5500 ............GNU. [ 90s] - 10178 fd7878da e48ae630 c804cea6 d90571e0 .xx....0......q. [ 90s] - 10188 6034c0bc `4.. [ 90s] + 10178 b5fab102 82dba9e6 8687e54b 0e4f30d8 ...........K.O0. [ 90s] + 10188 3973dac9 9s.. [ 90s] Contents of section .gnu.hash: [ 90s] 1018c 4c000000 07000000 10000000 09000000 L............... [ 90s] 1019c 8108f248 85600992 00088240 00000421 ...H.`.....@...! [ 90s] @@ -3902,4 +3902,4 @@ [ 90s] 0020 01120413 01140115 01170318 0119011a ................ [ 90s] 0030 021b0322 01 ...". [ 90s] Contents of section .gnu_debuglink: [ 90s] - 0000 67706572 662e6465 62756700 38673231 gperf.debug.8g21 [ 90s] + 0000 67706572 662e6465 62756700 dfae8358 gperf.debug....X [ 90s] compare /.build.oldpackages/gperf-debuginfo-3.0.4-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/gperf-debuginfo-3.0.4-1.6.armv7l.rpm [ 90s] --- /tmp/tmp.by9zG82tyL 2015-10-27 15:32:19.753784373 +0000 [ 90s] +++ /tmp/tmp.LCbvIXYPxv 2015-10-27 15:32:19.761784373 +0000 [ 90s] @@ -1,8 +1,8 @@ [ 90s] /usr/lib/debug 0 (none) 40755 root root 0 4294967295 [ 90s] /usr/lib/debug/.build-id 0 (none) 40755 root root 0 4294967295 [ 90s] -/usr/lib/debug/.build-id/fd 0 (none) 40755 root root 0 4294967295 [ 90s] -/usr/lib/debug/.build-id/fd/7878dae48ae630c804cea6d90571e06034c0bc 0 (none) 120777 root root 0 4294967295 ../../../../bin/gperf [ 90s] -/usr/lib/debug/.build-id/fd/7878dae48ae630c804cea6d90571e06034c0bc.debug 0 (none) 120777 root root 0 4294967295 ../../usr/bin/gperf.debug [ 90s] +/usr/lib/debug/.build-id/b5 0 (none) 40755 root root 0 4294967295 [ 90s] +/usr/lib/debug/.build-id/b5/fab10282dba9e68687e54b0e4f30d83973dac9 0 (none) 120777 root root 0 4294967295 ../../../../bin/gperf [ 90s] +/usr/lib/debug/.build-id/b5/fab10282dba9e68687e54b0e4f30d83973dac9.debug 0 (none) 120777 root root 0 4294967295 ../../usr/bin/gperf.debug [ 90s] /usr/lib/debug/usr 0 (none) 40755 root root 0 4294967295 [ 90s] /usr/lib/debug/usr/bin 0 (none) 40755 root root 0 4294967295 [ 90s] /usr/lib/debug/usr/bin/gperf.debug 0 (none) 100755 root root 0 4294967295 [ 90s] RPM meta information is different [ 90s] compare /.build.oldpackages/gperf-debugsource-3.0.4-1.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/gperf-debugsource-3.0.4-1.6.armv7l.rpm [ 90s] ... saving built statistics [ 90s] ... saving built packages [ 90s] /home/abuild/rpmbuild/RPMS/armv7l/gperf-3.0.4-1.6.armv7l.rpm [ 90s] /home/abuild/rpmbuild/RPMS/armv7l/gperf-debuginfo-3.0.4-1.6.armv7l.rpm [ 90s] /home/abuild/rpmbuild/RPMS/armv7l/gperf-debugsource-3.0.4-1.6.armv7l.rpm [ 90s] /home/abuild/rpmbuild/SRPMS/gperf-3.0.4-1.6.src.rpm [ 91s] /home/abuild/rpmbuild/OTHER/_statistics [ 91s] [ 91s] w17 finished "build gperf.spec" at Tue Oct 27 15:32:20 UTC 2015. [ 91s] [ 96s] [ 84.469525] SysRq : Power Off [ 96s] [ 84.477359] Power down. [ 96s] build: extracting built packages... [ 96s] gperf-3.0.4-1.6.armv7l.rpm [ 96s] gperf-debuginfo-3.0.4-1.6.armv7l.rpm [ 96s] gperf-debugsource-3.0.4-1.6.armv7l.rpm [ 96s] gperf-3.0.4-1.6.src.rpm [ 96s] _statistics