[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w19 started "build _service:gbs:patchelf.spec" at Tue Oct 27 15:30:38 UTC 2015. [ 0s] [ 0s] Building patchelf for project 'Tizen:2.4:Base' repository 'standard' arch 'armv7l' srcmd5 '6e32432dd4ffa843751ed33b6726eba3' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:patchelf.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:patchelf.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:patchelf.spec build rpmlint-Factory ... [ 1s] registering binfmt handlers for VM [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 1s] [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 2s] [22/52] preinstalling xz-libs... [ 2s] [23/52] preinstalling zlib... [ 2s] [24/52] preinstalling glibc-common... [ 2s] [25/52] preinstalling tar... [ 2s] [26/52] preinstalling coreutils... [ 2s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 2s] [28/52] preinstalling tizen-accelerator... [ 2s] [29/52] preinstalling libfile... [ 2s] [30/52] preinstalling bzip2... [ 2s] [31/52] preinstalling nss... [ 2s] [32/52] preinstalling bzip2-libs-x86-arm... [ 2s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 2s] [34/52] preinstalling glibc-x86-arm... [ 2s] [35/52] preinstalling libacl-x86-arm... [ 2s] [36/52] preinstalling libattr-x86-arm... [ 2s] [37/52] preinstalling libcap-x86-arm... [ 2s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 3s] [52/52] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> glibc -> glibc-common [ 4s] breaking dependency glibc-common -> bash [ 4s] cycle: bash -> glibc -> glibc-common -> coreutils [ 4s] breaking dependency glibc-common -> coreutils [ 4s] cycle: glibc -> glibc-common -> findutils [ 4s] breaking dependency glibc-common -> findutils [ 4s] cycle: glibc -> glibc-common [ 4s] breaking dependency glibc-common -> glibc [ 4s] cycle: glibc -> glibc-common -> grep [ 4s] breaking dependency grep -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency glibc -> glibc-common [ 4s] cycle: glibc -> libgcc [ 4s] breaking dependency libgcc -> glibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 4s] booting kvm ... [ 4s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 4675/2392064 files, 223002/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:patchelf.spec ... [ 8s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:patchelf.spec build rpmlint-Factory ... [ 9s] running rpm-x86-arm postinstall script [ 9s] running rpm-libs-x86-arm postinstall script [ 9s] running tizen-accelerator postinstall script [ 9s] running glibc-x86-arm postinstall script [ 10s] running bash-x86-arm postinstall script [ 10s] initializing rpm db... [ 15s] [1/164] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 15s] [2/164] cumulate kernel-headers-3.4.91-1.1 [ 15s] [3/164] cumulate tizen-release-2.2.0-1.1 [ 15s] [4/164] cumulate tzdata-2014j-1.1 [ 15s] [5/164] cumulate libgcc-4.9.2-2015.02.1.11 [ 15s] [6/164] cumulate setup-0.2-1.1 [ 15s] [7/164] cumulate filesystem-0.1-1.1 [ 15s] [8/164] cumulate glibc-2.20-2014.11.1.10 [ 15s] [9/164] cumulate libstdc++-4.9.2-2015.02.1.11 [ 15s] [10/164] cumulate libatomic-4.9.2-2015.02.1.11 [ 15s] [11/164] cumulate libgomp-4.9.2-2015.02.1.11 [ 15s] [12/164] cumulate openssl-1.0.1p-1.4 [ 15s] [13/164] cumulate bash-4.1-1.5 [ 15s] [14/164] cumulate bzip2-libs-1.0.5-1.8 [ 15s] [15/164] cumulate cpio-2.8-1.5 [ 15s] [16/164] cumulate db4-4.8.30-1.8 [ 15s] [17/164] cumulate diffutils-3.0-1.5 [ 15s] [18/164] cumulate e2fsprogs-libs-1.41.9-1.3 [ 15s] [19/164] cumulate elfutils-libelf-0.152-1.12 [ 15s] [20/164] cumulate expat-2.0.1-1.8 [ 15s] [21/164] cumulate fdupes-1.40-1.4 [ 15s] [22/164] cumulate findutils-4.2.31-1.4 [ 15s] [23/164] cumulate gdbm-1.8.3-1.12 [ 15s] [24/164] cumulate libattr-2.4.44-1.8 [ 15s] [25/164] cumulate libitm-4.9.2-2015.02.1.11 [ 15s] [26/164] cumulate liblua-5.1.4-1.6 [ 15s] [27/164] cumulate libuuid-2.20.2-1.3 [ 15s] [28/164] cumulate m4-1.4.14-1.4 [ 15s] [29/164] cumulate net-tools-1.60-2.5 [ 15s] [30/164] cumulate nspr-4.9-1.9 [ 15s] [31/164] cumulate nss-softokn-freebl-3.12.9-1.17 [ 15s] [32/164] cumulate patch-2.6-1.5 [ 15s] [33/164] cumulate pkg-config-0.25-2.5 [ 15s] [34/164] cumulate popt-1.16-1.8 [ 15s] [35/164] cumulate readline-5.2-1.6 [ 15s] [36/164] cumulate ruby-1.9.2-1.5 [ 15s] [37/164] cumulate sed-4.1.5-1.4 [ 15s] [38/164] cumulate sqlite-3.8.10.2-1.8 [ 15s] [39/164] cumulate xz-libs-5.0.3-1.8 [ 15s] [40/164] cumulate zlib-1.2.8-1.8 [ 15s] [41/164] cumulate libasan-4.9.2-2015.02.1.11 [ 15s] [42/164] cumulate libpcre-7.7-1.25 [ 15s] [43/164] cumulate libubsan-4.9.2-2015.02.1.11 [ 15s] [44/164] cumulate ncurses-libs-5.7-1.8 [ 15s] [45/164] cumulate build-compare-2009.10.14-1.5 [ 15s] [46/164] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 15s] [47/164] cumulate cpp-4.9.2-2015.02.1.11 [ 15s] [48/164] cumulate glibc-headers-2.20-2014.11.1.10 [ 15s] [49/164] cumulate libcap-2.21-1.6 [ 15s] [50/164] cumulate unzip-6.0-1.12 [ 16s] [51/164] cumulate grep-2.5.1a-1.4 [ 16s] [52/164] cumulate libacl-2.2.49-1.4 [ 16s] [53/164] cumulate libfile-5.04-1.7 [ 16s] [54/164] cumulate libpython-2.7.1-1.5 [ 16s] [55/164] cumulate libxml2-2.9.2-1.3 [ 16s] [56/164] cumulate make-3.82-154.1.5 [ 16s] [57/164] cumulate ncurses-5.7-1.8 [ 16s] [58/164] cumulate pcre-7.7-1.25 [ 16s] [59/164] cumulate psmisc-22.20-1.6 [ 16s] [60/164] cumulate binutils-2.25.0-2015.01.1.8 [ 16s] [61/164] cumulate bzip2-1.0.5-1.8 [ 16s] [62/164] cumulate libblkid-2.20.2-1.3 [ 16s] [63/164] cumulate xz-5.0.3-1.8 [ 16s] [64/164] cumulate elfutils-libs-0.152-1.12 [ 16s] [65/164] cumulate nss-3.12.9-1.17 [ 16s] [66/164] cumulate perl-5.12.1-1.25 [ 16s] [67/164] cumulate ncurses-base-5.7-1.8 [ 16s] [68/164] cumulate perl-HTML-Tagset-3.20-1.1 [ 16s] [69/164] cumulate perl-IO-Compress-Base-2.008-1.25 [ 16s] [70/164] cumulate perl-Module-Pluggable-3.60-1.25 [ 16s] [71/164] cumulate perl-Pod-Escapes-1.04-1.25 [ 16s] [72/164] cumulate perl-TimeDate-1.20-1.1 [ 16s] [73/164] cumulate perl-URI-1.54-1.1 [ 16s] [74/164] cumulate glibc-devel-2.20-2014.11.1.10 [ 16s] [75/164] cumulate file-5.04-1.7 [ 16s] [76/164] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 16s] [77/164] cumulate perl-libs-5.12.1-1.25 [ 16s] [78/164] cumulate tar-1.17-1.6 [ 16s] [79/164] cumulate coreutils-6.9-1.5 [ 16s] [80/164] cumulate libmount-2.20.2-1.3 [ 16s] [81/164] cumulate xz-lzma-compat-5.0.3-1.8 [ 16s] [82/164] cumulate elfutils-0.152-1.12 [ 16s] [83/164] cumulate nss-sysinit-3.12.9-1.17 [ 16s] [84/164] cumulate python-base-2.7.1-1.5 [ 16s] [85/164] cumulate glibc-common-2.20-2014.11.1.10 [ 16s] [86/164] cumulate libarchive-2.8.3-1.1 [ 16s] [87/164] cumulate rpm-libs-4.9.1-4.3.1.10 [ 16s] [88/164] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 16s] [89/164] cumulate perl-Pod-Simple-3.07-1.25 [ 16s] [90/164] cumulate tizen-accelerator-1.0.1-1.1 [ 16s] [91/164] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 16s] [92/164] cumulate gawk-3.1.5-1.6 [ 16s] [93/164] cumulate gzip-1.3.12-1.5 [ 16s] [94/164] cumulate perl-HTML-Parser-3.65-1.4 [ 16s] [95/164] cumulate python-xml-2.7.1-1.5 [ 16s] [96/164] cumulate autoconf-2.68-1.1 [ 16s] [97/164] cumulate build-2011.01.10a-1.1 [ 17s] [98/164] installing rpm-4.9.1-4.3.1.10 [ 17s] [99/164] cumulate util-linux-2.20.2-1.3 [ 17s] [100/164] cumulate cmake-2.8.5-1.1.1 [ 17s] [101/164] cumulate python-2.7.1-1.2 [ 17s] [102/164] cumulate gcc-4.9.2-2015.02.1.11 [ 17s] [103/164] cumulate automake-1.11.1-1.1 [ 17s] [104/164] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 17s] [105/164] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 17s] [106/164] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 17s] [107/164] cumulate expat-x86-arm-2.0.1-1.4 [ 17s] [108/164] cumulate glibc-x86-arm-2.20-9.1.5 [ 17s] [109/164] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 17s] [110/164] cumulate libarchive-x86-arm-2.8.3-1.3 [ 17s] [111/164] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 17s] [112/164] cumulate libcap-x86-arm-2.21-9.1.4 [ 17s] [113/164] cumulate libfile-x86-arm-5.04-9.1.4 [ 17s] [114/164] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 17s] [115/164] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 17s] [116/164] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 17s] [117/164] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 17s] [118/164] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 17s] [119/164] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 17s] [120/164] cumulate nspr-x86-arm-4.9-9.1.5 [ 17s] [121/164] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 17s] [122/164] cumulate nss-x86-arm-3.12.9-9.1.5 [ 17s] [123/164] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 17s] [124/164] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 18s] [125/164] cumulate popt-x86-arm-1.16-9.1.4 [ 18s] [126/164] cumulate python-x86-arm-2.7.1-9.1.3 [ 19s] [127/164] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 19s] [128/164] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 19s] [129/164] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 19s] [130/164] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 19s] [131/164] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 19s] [132/164] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 19s] [133/164] cumulate perl-Compress-Zlib-2.008-1.25 [ 19s] [134/164] cumulate rpm-build-4.9.1-4.3.1.10 [ 20s] [135/164] cumulate bash-x86-arm-4.1-9.1.4 [ 20s] [136/164] cumulate diffutils-x86-arm-3.0-9.1.4 [ 20s] [137/164] cumulate fdupes-x86-arm-1.40-9.1.4 [ 20s] [138/164] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 20s] [139/164] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 20s] [140/164] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 20s] [141/164] cumulate libtool-2.2.6b-1.8 [ 20s] [142/164] cumulate m4-x86-arm-1.4.14-9.1.4 [ 20s] [143/164] cumulate make-x86-arm-3.82-9.1.3 [ 20s] [144/164] cumulate patch-x86-arm-2.6-9.1.4 [ 21s] [145/164] cumulate perl-libwww-perl-5.836-1.1 [ 21s] [146/164] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 21s] [147/164] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 21s] [148/164] cumulate sed-x86-arm-4.1.5-9.1.4 [ 21s] [149/164] cumulate bzip2-x86-arm-1.0.5-1.4 [ 21s] [150/164] cumulate perl-x86-arm-5.12.1-9.1.5 [ 21s] [151/164] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 21s] [152/164] cumulate coreutils-x86-arm-6.9-9.1.4 [ 21s] [153/164] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.5 [ 21s] [154/164] cumulate file-x86-arm-5.04-9.1.4 [ 21s] [155/164] cumulate tar-x86-arm-1.17-9.1.4 [ 22s] [156/164] cumulate elfutils-x86-arm-0.152-9.1.4 [ 22s] [157/164] cumulate cmake-x86-arm-2.8.5-1.3 [ 22s] [158/164] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 22s] [159/164] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 22s] [160/164] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 22s] [161/164] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 22s] [162/164] cumulate perl-XML-Parser-2.36-1.5 [ 22s] [163/164] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 22s] [164/164] now installing cumulated packages [ 25s] Preparing... ################################################## [ 26s] setup ################################################## [ 26s] filesystem ################################################## [ 27s] tzdata ################################################## [ 27s] tizen-release ################################################## [ 27s] kernel-headers ################################################## [ 27s] cross-armv7l-platformfile ################################################## [ 27s] bash ################################################## [ 27s] findutils ################################################## [ 27s] grep ################################################## [ 27s] coreutils ################################################## [ 27s] glibc-common ################################################## [ 27s] libgcc ################################################## [ 27s] /sbin/ldconfig: relative path `1' used to build cache [ 27s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 27s] glibc ################################################## [ 28s] libstdc++ ################################################## [ 28s] libattr ################################################## [ 28s] libacl ################################################## [ 28s] libpcre ################################################## [ 28s] tizen-accelerator ################################################## [ 29s] glibc-x86-arm ################################################## [ 29s] libattr-x86-arm ################################################## [ 29s] libacl-x86-arm ################################################## [ 29s] libgcc-x86-arm ################################################## [ 29s] libstdc++-x86-arm ################################################## [ 30s] glibc-headers ################################################## [ 30s] glibc-devel ################################################## [ 30s] libstdc++-devel ################################################## [ 30s] coreutils-x86-arm ################################################## [ 33s] bash-x86-arm ################################################## [ 33s] findutils-x86-arm ################################################## [ 33s] build-compare ################################################## [ 34s] qemu-linux-user-x86-arm ################################################## [ 34s] zlib ################################################## [ 34s] zlib-x86-arm ################################################## [ 34s] bzip2-libs ################################################## [ 34s] bzip2-libs-x86-arm ################################################## [ 34s] elfutils-libelf ################################################## [ 34s] xz-libs ################################################## [ 34s] ncurses-libs ################################################## [ 34s] ncurses ################################################## [ 34s] ncurses-base ################################################## [ 35s] binutils ################################################## [ 35s] libpython ################################################## [ 35s] xz-libs-x86-arm ################################################## [ 35s] elfutils-libelf-x86-arm ################################################## [ 36s] python-base ################################################## [ 36s] libfile ################################################## [ 36s] openssl ################################################## [ 36s] expat ################################################## [ 36s] libuuid ################################################## [ 36s] nspr ################################################## [ 36s] popt ################################################## [ 36s] sed ################################################## [ 37s] sqlite ################################################## [ 37s] popt-x86-arm ################################################## [ 37s] nspr-x86-arm ################################################## [ 37s] libfile-x86-arm ################################################## [ 37s] libblkid ################################################## [ 37s] file ################################################## [ 37s] xz ################################################## [ 37s] elfutils-libs ################################################## [ 37s] elfutils ################################################## [ 37s] bzip2 ################################################## [ 37s] libxml2 ################################################## [ 37s] libarchive ################################################## [ 37s] tar ################################################## [ 37s] libcap ################################################## [ 37s] libcap-x86-arm ################################################## [ 37s] diffutils ################################################## [ 37s] liblua ################################################## [ 37s] liblua-x86-arm ################################################## [ 37s] m4 ################################################## [ 37s] nss-softokn-freebl ################################################## [ 37s] nss ################################################## [ 37s] nss-sysinit ################################################## [ 38s] nss-x86-arm ################################################## [ 38s] rpm-libs ################################################## [ 38s] rpm-libs-x86-arm ################################################## [ 38s] patch ################################################## [ 38s] pkg-config ################################################## [ 38s] gawk ################################################## [ 38s] gzip ################################################## [ 38s] libarchive-x86-arm ################################################## [ 38s] libxml2-x86-arm ################################################## [ 38s] elfutils-libs-x86-arm ################################################## [ 38s] openssl-x86-arm ################################################## [ 38s] libpython-x86-arm ################################################## [ 39s] cmake ################################################## [ 39s] xz-lzma-compat ################################################## [ 39s] libmount ################################################## [ 39s] python-xml ################################################## [ 39s] cpp ################################################## [ 39s] libasan ################################################## [ 39s] libubsan ################################################## [ 39s] libatomic ################################################## [ 39s] libgomp ################################################## [ 39s] cpio ################################################## [ 39s] db4 ################################################## [ 39s] fdupes ################################################## [ 39s] gdbm ################################################## [ 39s] perl-Pod-Escapes ################################################## [ 39s] perl-Compress-Raw-Zlib ################################################## [ 39s] perl-IO-Compress-Base ################################################## [ 39s] perl-Module-Pluggable ################################################## [ 39s] perl-Pod-Simple ################################################## [ 39s] perl-IO-Compress-Zlib ################################################## [ 39s] perl-libs ################################################## [ 40s] perl ################################################## [ 40s] perl-URI ################################################## [ 40s] autoconf ################################################## [ 40s] automake ################################################## [ 40s] perl-HTML-Tagset ################################################## [ 40s] perl-TimeDate ################################################## [ 40s] perl-Compress-Zlib ################################################## [ 40s] perl-libs-x86-arm ################################################## [ 41s] perl-x86-arm ################################################## [ 42s] perl-HTML-Parser ################################################## [ 42s] perl-libwww-perl ################################################## [ 42s] perl-XML-Parser ################################################## [ 42s] libitm ################################################## [ 42s] gcc ################################################## [ 42s] gcc-c++ ################################################## [ 44s] cross-armv7l-gcc-accel-x86-a################################################## [ 44s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 44s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 44s] readline ################################################## [ 44s] python ################################################## [ 44s] ruby ################################################## [ 44s] unzip ################################################## [ 44s] rpm-build ################################################## [ 44s] make ################################################## [ 44s] make-x86-arm ################################################## [ 44s] rpm-build-x86-arm ################################################## [ 45s] ruby-x86-arm ################################################## [ 45s] python-x86-arm ################################################## [ 45s] cross-armv7l-binutils-accel-################################################## [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 45s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 46s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 46s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 46s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 46s] perl-XML-Parser-x86-arm ################################################## [ 46s] perl-HTML-Parser-x86-arm ################################################## [ 46s] build ################################################## [ 46s] libtool ################################################## [ 46s] fdupes-x86-arm ################################################## [ 46s] python-xml-x86-arm ################################################## [ 46s] cmake-x86-arm ################################################## [ 46s] python-base-x86-arm ################################################## [ 47s] elfutils-x86-arm ################################################## [ 47s] gzip-x86-arm ################################################## [ 47s] gawk-x86-arm ################################################## [ 47s] pkg-config-x86-arm ################################################## [ 47s] patch-x86-arm ################################################## [ 48s] rpm-x86-arm ################################################## [ 48s] /bin/rpm.orig-arm already present - skipping. [ 48s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 48s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 48s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 48s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 48s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 48s] nss-softokn-freebl-x86-arm ################################################## [ 48s] m4-x86-arm ################################################## [ 48s] diffutils-x86-arm ################################################## [ 48s] tar-x86-arm ################################################## [ 48s] bzip2-x86-arm ################################################## [ 48s] file-x86-arm ################################################## [ 48s] sqlite-x86-arm ################################################## [ 48s] sed-x86-arm ################################################## [ 48s] expat-x86-arm ################################################## [ 48s] ncurses-libs-x86-arm ################################################## [ 48s] util-linux ################################################## [ 48s] psmisc ################################################## [ 48s] pcre ################################################## [ 48s] e2fsprogs-libs ################################################## [ 48s] net-tools ################################################## [ 49s] removing nis flags from //etc/nsswitch.conf... [ 49s] now finalizing build dir... [ 50s] build target is armv7l-tizen-linux [ 50s] ----------------------------------------------------------------- [ 50s] I have the following modifications for patchelf.spec: [ 50s] 10c10 [ 50s] < Release: 1 [ 50s] --- [ 50s] > Release: %{?release_prefix:%{release_prefix}.}1.5 [ 50s] 43a44 [ 50s] > %changelog [ 50s] ----------------------------------------------------------------- [ 50s] ----- building patchelf.spec (user abuild) [ 50s] ----------------------------------------------------------------- [ 50s] ----------------------------------------------------------------- [ 50s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.4:Base/standard/6e32432dd4ffa843751ed33b6726eba3-patchelf' /home/abuild/rpmbuild/SOURCES/patchelf.spec [ 50s] Building target platforms: armv7l-tizen-linux [ 50s] Building for target armv7l-tizen-linux [ 50s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.QFov45 [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + rm -rf patchelf [ 50s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/patchelf.tar.bz2 [ 50s] + /bin/tar -xf - [ 50s] + STATUS=0 [ 50s] + '[' 0 -ne 0 ']' [ 50s] + cd patchelf [ 50s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 50s] + exit 0 [ 50s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Df2ErS [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd patchelf [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 50s] + export CFLAGS [ 50s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 50s] + export CXXFLAGS [ 50s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 50s] + export FFLAGS [ 50s] + LD_AS_NEEDED=1 [ 50s] + export LD_AS_NEEDED [ 50s] + ./bootstrap.sh [ 51s] configure.ac:3: installing `./install-sh' [ 51s] configure.ac:3: installing `./missing' [ 51s] src/Makefile.am: installing `./depcomp' [ 52s] + ./configure --prefix=/usr [ 52s] checking for a BSD-compatible install... /usr/bin/install -c [ 53s] checking whether build environment is sane... yes [ 53s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 53s] checking for gawk... gawk [ 53s] checking whether make sets $(MAKE)... yes [ 53s] checking for gcc... gcc [ 53s] checking whether the C compiler works... yes [ 53s] checking for C compiler default output file name... a.out [ 53s] checking for suffix of executables... [ 53s] checking whether we are cross compiling... no [ 53s] checking for suffix of object files... o [ 53s] checking whether we are using the GNU C compiler... yes [ 53s] checking whether gcc accepts -g... yes [ 53s] checking for gcc option to accept ISO C89... none needed [ 53s] checking for style of include used by make... GNU [ 53s] checking dependency style of gcc... gcc3 [ 53s] checking for g++... g++ [ 53s] checking whether we are using the GNU C++ compiler... yes [ 53s] checking whether g++ accepts -g... yes [ 54s] checking dependency style of g++... gcc3 [ 54s] configure: creating ./config.status [ 54s] config.status: creating Makefile [ 54s] config.status: creating src/Makefile [ 54s] config.status: creating tests/Makefile [ 54s] config.status: executing depfiles commands [ 54s] + make [ 54s] Making all in src [ 54s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf/src' [ 54s] g++ -DPACKAGE_NAME=\"patchelf\" -DPACKAGE_TARNAME=\"patchelf\" -DPACKAGE_VERSION=\"0.6\" -DPACKAGE_STRING=\"patchelf\ 0.6\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"patchelf\" -DVERSION=\"0.6\" -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT patchelf.o -MD -MP -MF .deps/patchelf.Tpo -c -o patchelf.o patchelf.cc [ 58s] mv -f .deps/patchelf.Tpo .deps/patchelf.Po [ 58s] g++ -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -o patchelf patchelf.o [ 58s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf/src' [ 58s] Making all in tests [ 58s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf/tests' [ 58s] make[1]: Nothing to be done for `all'. [ 58s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf/tests' [ 58s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf' [ 58s] make[1]: Nothing to be done for `all-am'. [ 58s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf' [ 58s] + exit 0 [ 58s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aQTk07 [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd patchelf [ 58s] + LANG=C [ 58s] + export LANG [ 58s] + unset DISPLAY [ 58s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm [ 58s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm install [ 58s] Making install in src [ 58s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf/src' [ 58s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf/src' [ 58s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm/usr/bin" [ 58s] /usr/bin/install -c patchelf '/home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm/usr/bin' [ 58s] make[2]: Nothing to be done for `install-data-am'. [ 58s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf/src' [ 58s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf/src' [ 58s] Making install in tests [ 58s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf/tests' [ 58s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf/tests' [ 58s] make[2]: Nothing to be done for `install-exec-am'. [ 58s] make[2]: Nothing to be done for `install-data-am'. [ 58s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf/tests' [ 58s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf/tests' [ 58s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf' [ 58s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/patchelf' [ 58s] make[2]: Nothing to be done for `install-exec-am'. [ 58s] /usr/bin/install -c -d /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm/usr/share/doc/patchelf [ 58s] /usr/bin/install -c -m 644 README /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm/usr/share/doc/patchelf/ [ 58s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf' [ 58s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/patchelf' [ 58s] + rm -f /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm/usr/share/info/dir [ 58s] + find /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm -regex '.*\.la$' [ 58s] + xargs rm -f -- [ 58s] + xargs rm -f -- [ 58s] + find /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm -regex '.*\.a$' [ 58s] + strip /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm//usr/bin/patchelf [ 58s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/patchelf [ 58s] + /usr/lib/rpm/check-buildroot [ 58s] + /usr/lib/rpm//brp-compress [ 58s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 58s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 58s] + /usr/lib/rpm/brp-python-hardlink [ 58s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm [ 58s] Processing files: patchelf-0.5.svn20809-1.5.armv7l [ 58s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 58s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 58s] Processing files: patchelf-debuginfo-0.5.svn20809-1.5.armv7l [ 58s] Processing files: patchelf-debugsource-0.5.svn20809-1.5.armv7l [ 58s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm [ 58s] Wrote: /home/abuild/rpmbuild/SRPMS/patchelf-0.5.svn20809-1.5.src.rpm [ 58s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/patchelf-0.5.svn20809-1.5.armv7l.rpm [ 58s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/patchelf-debuginfo-0.5.svn20809-1.5.armv7l.rpm [ 58s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/patchelf-debugsource-0.5.svn20809-1.5.armv7l.rpm [ 58s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.dtXfpu [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd patchelf [ 58s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/patchelf-0.5.svn20809-1.5.arm [ 58s] + exit 0 [ 58s] ... checking for files with abuild user/group [ 58s] ... creating baselibs [ 59s] ... comparing built packages with the former built [ 59s] /usr/lib/build/rpm-check.sh [ 59s] compare /.build.oldpackages/patchelf-0.5.svn20809-1.4.src.rpm /home/abuild/rpmbuild/SRPMS/patchelf-0.5.svn20809-1.5.src.rpm [ 59s] compare /.build.oldpackages/patchelf-0.5.svn20809-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/patchelf-0.5.svn20809-1.5.armv7l.rpm [ 59s] /usr/bin/patchelf differs in ELF sections [ 59s] --- /tmp/tmp.mcPN0xPGvI 2015-10-27 15:31:37.292787732 +0000 [ 59s] +++ /tmp/tmp.rAAK5soddE 2015-10-27 15:31:37.308787732 +0000 [ 59s] @@ -9,8 +9,8 @@ [ 59s] 10158 00000000 02000000 06000000 20000000 ............ ... [ 59s] Contents of section .note.gnu.build-id: [ 59s] 10168 04000000 14000000 03000000 474e5500 ............GNU. [ 59s] - 10178 26022a17 b8540a16 fa7d1206 4c4f0f1a &.*..T...}..LO.. [ 59s] - 10188 191b37d7 ..7. [ 59s] + 10178 5d57d915 15daa73c ae99f6aa 53a3d034 ]W.....<....S..4 [ 59s] + 10188 5801ced4 X... [ 59s] Contents of section .gnu.hash: [ 59s] 1018c 5f000000 08000000 10000000 09000000 _............... [ 59s] 1019c 04000020 80407192 00228208 09002240 ... .@q.."...."@ [ 59s] compare /.build.oldpackages/patchelf-debuginfo-0.5.svn20809-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/patchelf-debuginfo-0.5.svn20809-1.5.armv7l.rpm [ 60s] compare /.build.oldpackages/patchelf-debugsource-0.5.svn20809-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/patchelf-debugsource-0.5.svn20809-1.5.armv7l.rpm [ 60s] ... saving built statistics [ 60s] ... saving built packages [ 60s] /home/abuild/rpmbuild/RPMS/armv7l/patchelf-0.5.svn20809-1.5.armv7l.rpm [ 60s] /home/abuild/rpmbuild/RPMS/armv7l/patchelf-debuginfo-0.5.svn20809-1.5.armv7l.rpm [ 60s] /home/abuild/rpmbuild/RPMS/armv7l/patchelf-debugsource-0.5.svn20809-1.5.armv7l.rpm [ 60s] /home/abuild/rpmbuild/SRPMS/patchelf-0.5.svn20809-1.5.src.rpm [ 60s] /home/abuild/rpmbuild/OTHER/_statistics [ 60s] [ 60s] w19 finished "build patchelf.spec" at Tue Oct 27 15:31:37 UTC 2015. [ 60s] [ 65s] [ 58.989437] SysRq : Power Off [ 65s] [ 59.304480] Power down. [ 66s] build: extracting built packages... [ 66s] patchelf-0.5.svn20809-1.5.armv7l.rpm [ 66s] patchelf-debuginfo-0.5.svn20809-1.5.armv7l.rpm [ 66s] patchelf-debugsource-0.5.svn20809-1.5.armv7l.rpm [ 66s] patchelf-0.5.svn20809-1.5.src.rpm [ 66s] _statistics