[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w21 started "build _service:gbs:perl-HTML-Parser.spec" at Tue Oct 27 15:32:54 UTC 2015. [ 0s] [ 0s] Building perl-HTML-Parser for project 'Tizen:2.4:Base' repository 'standard' arch 'armv7l' srcmd5 'e5d90ab275b069551e5005cccb3337a8' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:perl-HTML-Parser.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:perl-HTML-Parser.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:perl-HTML-Parser.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 2s] [29/52] preinstalling libfile... [ 2s] [30/52] preinstalling bzip2... [ 2s] [31/52] preinstalling nss... [ 2s] [32/52] preinstalling bzip2-libs-x86-arm... [ 2s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 2s] [34/52] preinstalling glibc-x86-arm... [ 2s] [35/52] preinstalling libacl-x86-arm... [ 2s] [36/52] preinstalling libattr-x86-arm... [ 2s] [37/52] preinstalling libcap-x86-arm... [ 2s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> glibc -> glibc-common [ 4s] breaking dependency glibc-common -> bash [ 4s] cycle: bash -> glibc -> glibc-common -> coreutils [ 4s] breaking dependency glibc-common -> coreutils [ 4s] cycle: glibc -> glibc-common -> findutils [ 4s] breaking dependency glibc-common -> findutils [ 4s] cycle: glibc -> glibc-common [ 4s] breaking dependency glibc-common -> glibc [ 4s] cycle: glibc -> glibc-common -> grep [ 4s] breaking dependency grep -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency glibc -> glibc-common [ 4s] cycle: glibc -> libgcc [ 4s] breaking dependency libgcc -> glibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 5s] booting kvm ... [ 5s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4686/2392064 files, 223380/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/_service:gbs:perl-HTML-Parser.spec ... [ 10s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-HTML-Parser.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running glibc-x86-arm postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 16s] [1/170] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 16s] [2/170] cumulate kernel-headers-3.4.91-1.1 [ 16s] [3/170] cumulate tizen-release-2.2.0-1.1 [ 16s] [4/170] cumulate tzdata-2014j-1.1 [ 16s] [5/170] cumulate libgcc-4.9.2-2015.02.1.11 [ 17s] [6/170] cumulate setup-0.2-1.1 [ 17s] [7/170] cumulate filesystem-0.1-1.1 [ 17s] [8/170] cumulate glibc-2.20-2014.11.1.10 [ 17s] [9/170] cumulate libstdc++-4.9.2-2015.02.1.11 [ 18s] [10/170] cumulate libatomic-4.9.2-2015.02.1.11 [ 18s] [11/170] cumulate libgomp-4.9.2-2015.02.1.11 [ 18s] [12/170] cumulate openssl-1.0.1p-1.4 [ 18s] [13/170] cumulate bash-4.1-1.6 [ 18s] [14/170] cumulate bzip2-libs-1.0.5-1.8 [ 18s] [15/170] cumulate cpio-2.8-1.6 [ 18s] [16/170] cumulate db4-4.8.30-1.8 [ 18s] [17/170] cumulate diffutils-3.0-1.6 [ 18s] [18/170] cumulate e2fsprogs-libs-1.41.9-1.3 [ 20s] [19/170] cumulate elfutils-libelf-0.152-1.12 [ 20s] [20/170] cumulate expat-2.0.1-1.8 [ 20s] [21/170] cumulate fdupes-1.40-1.5 [ 20s] [22/170] cumulate findutils-4.2.31-1.4 [ 21s] [23/170] cumulate gdbm-1.8.3-1.12 [ 21s] [24/170] cumulate libattr-2.4.44-1.8 [ 21s] [25/170] cumulate libitm-4.9.2-2015.02.1.11 [ 21s] [26/170] cumulate liblua-5.1.4-1.6 [ 21s] [27/170] cumulate libuuid-2.20.2-1.3 [ 22s] [28/170] cumulate m4-1.4.14-1.5 [ 22s] [29/170] cumulate net-tools-1.60-2.6 [ 22s] [30/170] cumulate nspr-4.9-1.9 [ 22s] [31/170] cumulate nss-softokn-freebl-3.12.9-1.17 [ 22s] [32/170] cumulate patch-2.6-1.6 [ 22s] [33/170] cumulate pkg-config-0.25-2.6 [ 22s] [34/170] cumulate popt-1.16-1.8 [ 22s] [35/170] cumulate readline-5.2-1.6 [ 22s] [36/170] cumulate ruby-1.9.2-1.5 [ 22s] [37/170] cumulate sed-4.1.5-1.5 [ 22s] [38/170] cumulate sqlite-3.8.10.2-1.8 [ 22s] [39/170] cumulate xz-libs-5.0.3-1.8 [ 22s] [40/170] cumulate zlib-1.2.8-1.8 [ 23s] [41/170] cumulate libasan-4.9.2-2015.02.1.11 [ 23s] [42/170] cumulate libpcre-7.7-1.25 [ 23s] [43/170] cumulate libubsan-4.9.2-2015.02.1.11 [ 23s] [44/170] cumulate patchelf-0.5.svn20809-1.5 [ 23s] [45/170] cumulate ncurses-libs-5.7-1.8 [ 23s] [46/170] cumulate build-compare-2009.10.14-1.6 [ 23s] [47/170] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 23s] [48/170] cumulate cpp-4.9.2-2015.02.1.11 [ 24s] [49/170] cumulate glibc-headers-2.20-2014.11.1.10 [ 24s] [50/170] cumulate libcap-2.21-1.6 [ 24s] [51/170] cumulate unzip-6.0-1.12 [ 24s] [52/170] cumulate grep-2.5.1a-1.5 [ 24s] [53/170] cumulate libacl-2.2.49-1.5 [ 24s] [54/170] cumulate libfile-5.04-1.7 [ 24s] [55/170] cumulate libpython-2.7.1-1.5 [ 24s] [56/170] cumulate libxml2-2.9.2-1.3 [ 24s] [57/170] cumulate make-3.82-154.1.6 [ 24s] [58/170] cumulate ncurses-5.7-1.8 [ 24s] [59/170] cumulate pcre-7.7-1.25 [ 24s] [60/170] cumulate psmisc-22.20-1.6 [ 24s] [61/170] cumulate binutils-2.25.0-2015.01.1.8 [ 24s] [62/170] cumulate bzip2-1.0.5-1.8 [ 24s] [63/170] cumulate libblkid-2.20.2-1.3 [ 24s] [64/170] cumulate xz-5.0.3-1.8 [ 24s] [65/170] cumulate elfutils-libs-0.152-1.12 [ 24s] [66/170] cumulate nss-3.12.9-1.17 [ 24s] [67/170] cumulate perl-5.12.1-1.25 [ 24s] [68/170] cumulate ncurses-base-5.7-1.8 [ 25s] [69/170] cumulate perl-HTML-Tagset-3.20-1.1 [ 25s] [70/170] cumulate perl-IO-Compress-Base-2.008-1.25 [ 25s] [71/170] cumulate perl-Module-Pluggable-3.60-1.25 [ 25s] [72/170] cumulate perl-Pod-Escapes-1.04-1.25 [ 25s] [73/170] cumulate perl-TimeDate-1.20-1.1 [ 25s] [74/170] cumulate perl-URI-1.54-1.1 [ 25s] [75/170] cumulate glibc-devel-2.20-2014.11.1.10 [ 25s] [76/170] cumulate file-5.04-1.7 [ 25s] [77/170] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 25s] [78/170] cumulate perl-devel-5.12.1-1.25 [ 25s] [79/170] cumulate perl-libs-5.12.1-1.25 [ 25s] [80/170] cumulate tar-1.17-1.6 [ 25s] [81/170] cumulate coreutils-6.9-1.5 [ 25s] [82/170] cumulate libmount-2.20.2-1.3 [ 25s] [83/170] cumulate xz-lzma-compat-5.0.3-1.8 [ 25s] [84/170] cumulate elfutils-0.152-1.12 [ 25s] [85/170] cumulate nss-sysinit-3.12.9-1.17 [ 25s] [86/170] cumulate python-base-2.7.1-1.5 [ 25s] [87/170] cumulate glibc-common-2.20-2014.11.1.10 [ 25s] [88/170] cumulate libarchive-2.8.3-1.1 [ 25s] [89/170] cumulate rpm-libs-4.9.1-4.3.1.10 [ 25s] [90/170] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 25s] [91/170] cumulate perl-ExtUtils-ParseXS-2.18-1.25 [ 25s] [92/170] cumulate perl-Pod-Simple-3.07-1.25 [ 25s] [93/170] cumulate perl-Test-Simple-0.80-1.25 [ 25s] [94/170] cumulate tizen-accelerator-1.0.1-1.1 [ 25s] [95/170] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 25s] [96/170] cumulate perl-Test-Harness-3.12-1.25 [ 25s] [97/170] cumulate gawk-3.1.5-1.6 [ 25s] [98/170] cumulate gzip-1.3.12-1.6 [ 25s] [99/170] cumulate python-xml-2.7.1-1.5 [ 25s] [100/170] cumulate build-2011.01.10a-1.1 [ 25s] [101/170] installing rpm-4.9.1-4.3.1.10 [ 26s] [102/170] cumulate util-linux-2.20.2-1.3 [ 26s] [103/170] cumulate cmake-2.8.5-1.1.1 [ 26s] [104/170] cumulate python-2.7.1-1.2 [ 26s] [105/170] cumulate gcc-4.9.2-2015.02.1.11 [ 26s] [106/170] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 26s] [107/170] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 26s] [108/170] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 26s] [109/170] cumulate expat-x86-arm-2.0.1-1.4 [ 26s] [110/170] cumulate glibc-x86-arm-2.20-9.1.5 [ 26s] [111/170] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 26s] [112/170] cumulate libarchive-x86-arm-2.8.3-1.3 [ 26s] [113/170] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 26s] [114/170] cumulate libcap-x86-arm-2.21-9.1.4 [ 26s] [115/170] cumulate libfile-x86-arm-5.04-9.1.4 [ 26s] [116/170] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 26s] [117/170] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 26s] [118/170] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 26s] [119/170] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 26s] [120/170] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 26s] [121/170] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 26s] [122/170] cumulate nspr-x86-arm-4.9-9.1.5 [ 26s] [123/170] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 26s] [124/170] cumulate nss-x86-arm-3.12.9-9.1.5 [ 26s] [125/170] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 26s] [126/170] cumulate perl-ExtUtils-MakeMaker-6.36-1.25 [ 26s] [127/170] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 26s] [128/170] cumulate popt-x86-arm-1.16-9.1.4 [ 27s] [129/170] cumulate python-x86-arm-2.7.1-9.1.3 [ 27s] [130/170] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 27s] [131/170] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 27s] [132/170] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 27s] [133/170] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 27s] [134/170] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 27s] [135/170] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 27s] [136/170] cumulate perl-Compress-Zlib-2.008-1.25 [ 27s] [137/170] cumulate rpm-build-4.9.1-4.3.1.10 [ 27s] [138/170] cumulate bash-x86-arm-4.1-9.1.4 [ 27s] [139/170] cumulate perl-CPAN-1.9205-1.25 [ 27s] [140/170] cumulate perl-libwww-perl-5.836-1.1 [ 27s] [141/170] cumulate diffutils-x86-arm-3.0-9.1.4 [ 27s] [142/170] cumulate fdupes-x86-arm-1.40-9.1.4 [ 27s] [143/170] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 27s] [144/170] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 27s] [145/170] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 27s] [146/170] cumulate m4-x86-arm-1.4.14-9.1.4 [ 27s] [147/170] cumulate make-x86-arm-3.82-9.1.3 [ 27s] [148/170] cumulate patch-x86-arm-2.6-9.1.4 [ 27s] [149/170] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 27s] [150/170] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 27s] [151/170] cumulate sed-x86-arm-4.1.5-9.1.4 [ 27s] [152/170] cumulate bzip2-x86-arm-1.0.5-1.4 [ 27s] [153/170] cumulate perl-x86-arm-5.12.1-9.1.5 [ 27s] [154/170] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 27s] [155/170] cumulate autoconf-2.68-1.1 [ 27s] [156/170] cumulate coreutils-x86-arm-6.9-9.1.4 [ 27s] [157/170] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.5 [ 27s] [158/170] cumulate file-x86-arm-5.04-9.1.4 [ 27s] [159/170] cumulate tar-x86-arm-1.17-9.1.4 [ 27s] [160/170] cumulate elfutils-x86-arm-0.152-9.1.4 [ 27s] [161/170] cumulate cmake-x86-arm-2.8.5-1.3 [ 27s] [162/170] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 27s] [163/170] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 27s] [164/170] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 27s] [165/170] cumulate automake-1.11.1-1.1 [ 27s] [166/170] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 27s] [167/170] cumulate perl-XML-Parser-2.36-1.6 [ 27s] [168/170] cumulate libtool-2.2.6b-1.8 [ 27s] [169/170] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 27s] [170/170] now installing cumulated packages [ 28s] Preparing... ################################################## [ 28s] setup ################################################## [ 28s] filesystem ################################################## [ 28s] tzdata ################################################## [ 28s] tizen-release ################################################## [ 28s] kernel-headers ################################################## [ 28s] cross-armv7l-platformfile ################################################## [ 28s] bash ################################################## [ 28s] findutils ################################################## [ 28s] grep ################################################## [ 28s] coreutils ################################################## [ 28s] glibc-common ################################################## [ 28s] libgcc ################################################## [ 28s] /sbin/ldconfig: relative path `1' used to build cache [ 28s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 29s] glibc ################################################## [ 29s] libstdc++ ################################################## [ 29s] libattr ################################################## [ 29s] libacl ################################################## [ 29s] libpcre ################################################## [ 29s] tizen-accelerator ################################################## [ 29s] glibc-x86-arm ################################################## [ 29s] libattr-x86-arm ################################################## [ 30s] libacl-x86-arm ################################################## [ 30s] libgcc-x86-arm ################################################## [ 30s] libstdc++-x86-arm ################################################## [ 30s] glibc-headers ################################################## [ 30s] glibc-devel ################################################## [ 30s] libstdc++-devel ################################################## [ 30s] coreutils-x86-arm ################################################## [ 33s] bash-x86-arm ################################################## [ 33s] findutils-x86-arm ################################################## [ 33s] build-compare ################################################## [ 33s] qemu-linux-user-x86-arm ################################################## [ 34s] zlib ################################################## [ 34s] zlib-x86-arm ################################################## [ 34s] bzip2-libs ################################################## [ 34s] bzip2-libs-x86-arm ################################################## [ 34s] elfutils-libelf ################################################## [ 34s] xz-libs ################################################## [ 34s] ncurses-libs ################################################## [ 34s] ncurses ################################################## [ 34s] ncurses-base ################################################## [ 34s] binutils ################################################## [ 34s] libpython ################################################## [ 34s] xz-libs-x86-arm ################################################## [ 34s] elfutils-libelf-x86-arm ################################################## [ 34s] python-base ################################################## [ 34s] libfile ################################################## [ 34s] openssl ################################################## [ 34s] expat ################################################## [ 34s] libuuid ################################################## [ 34s] nspr ################################################## [ 34s] popt ################################################## [ 34s] sed ################################################## [ 34s] sqlite ################################################## [ 34s] popt-x86-arm ################################################## [ 34s] nspr-x86-arm ################################################## [ 34s] libfile-x86-arm ################################################## [ 34s] libblkid ################################################## [ 34s] file ################################################## [ 34s] xz ################################################## [ 34s] elfutils-libs ################################################## [ 34s] elfutils ################################################## [ 34s] bzip2 ################################################## [ 34s] libxml2 ################################################## [ 34s] libarchive ################################################## [ 34s] tar ################################################## [ 34s] libcap ################################################## [ 34s] libcap-x86-arm ################################################## [ 35s] diffutils ################################################## [ 35s] liblua ################################################## [ 35s] liblua-x86-arm ################################################## [ 35s] m4 ################################################## [ 35s] nss-softokn-freebl ################################################## [ 35s] nss ################################################## [ 35s] nss-sysinit ################################################## [ 35s] nss-x86-arm ################################################## [ 35s] rpm-libs ################################################## [ 35s] rpm-libs-x86-arm ################################################## [ 35s] patch ################################################## [ 35s] pkg-config ################################################## [ 35s] gawk ################################################## [ 35s] gzip ################################################## [ 35s] libarchive-x86-arm ################################################## [ 35s] libxml2-x86-arm ################################################## [ 35s] elfutils-libs-x86-arm ################################################## [ 35s] openssl-x86-arm ################################################## [ 35s] libpython-x86-arm ################################################## [ 35s] cmake ################################################## [ 35s] xz-lzma-compat ################################################## [ 35s] libmount ################################################## [ 35s] python-xml ################################################## [ 35s] cpp ################################################## [ 35s] libasan ################################################## [ 35s] libubsan ################################################## [ 35s] libatomic ################################################## [ 35s] libgomp ################################################## [ 35s] cpio ################################################## [ 35s] db4 ################################################## [ 35s] fdupes ################################################## [ 35s] gdbm ################################################## [ 35s] perl-Pod-Escapes ################################################## [ 35s] perl-Compress-Raw-Zlib ################################################## [ 36s] perl-IO-Compress-Base ################################################## [ 36s] perl-Module-Pluggable ################################################## [ 36s] perl-Pod-Simple ################################################## [ 36s] perl-IO-Compress-Zlib ################################################## [ 36s] perl-libs ################################################## [ 36s] perl ################################################## [ 36s] perl-ExtUtils-ParseXS ################################################## [ 36s] perl-devel ################################################## [ 36s] perl-ExtUtils-MakeMaker ################################################## [ 36s] perl-Test-Harness ################################################## [ 36s] perl-CPAN ################################################## [ 36s] perl-URI ################################################## [ 36s] autoconf ################################################## [ 36s] automake ################################################## [ 36s] perl-TimeDate ################################################## [ 36s] perl-Compress-Zlib ################################################## [ 36s] perl-libwww-perl ################################################## [ 36s] perl-libs-x86-arm ################################################## [ 37s] perl-x86-arm ################################################## [ 38s] perl-XML-Parser ################################################## [ 38s] libitm ################################################## [ 38s] gcc ################################################## [ 38s] gcc-c++ ################################################## [ 39s] cross-armv7l-gcc-accel-x86-a################################################## [ 39s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 39s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 40s] readline ################################################## [ 40s] python ################################################## [ 40s] ruby ################################################## [ 40s] unzip ################################################## [ 40s] rpm-build ################################################## [ 40s] make ################################################## [ 40s] make-x86-arm ################################################## [ 40s] rpm-build-x86-arm ################################################## [ 40s] ruby-x86-arm ################################################## [ 40s] python-x86-arm ################################################## [ 41s] cross-armv7l-binutils-accel-################################################## [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 41s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 41s] perl-XML-Parser-x86-arm ################################################## [ 41s] perl-HTML-Parser-x86-arm ################################################## [ 41s] mv: cannot stat `/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so': No such file or directory [ 41s] ln: creating symbolic link `/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so': No such file or directory [ 41s] warning: %post(perl-HTML-Parser-x86-arm-3.65-9.1.3.armv7l) scriptlet failed, exit status 1 [ 41s] build ################################################## [ 41s] libtool ################################################## [ 41s] perl-Test-Simple ################################################## [ 41s] perl-HTML-Tagset ################################################## [ 41s] fdupes-x86-arm ################################################## [ 42s] python-xml-x86-arm ################################################## [ 42s] cmake-x86-arm ################################################## [ 42s] python-base-x86-arm ################################################## [ 43s] elfutils-x86-arm ################################################## [ 43s] gzip-x86-arm ################################################## [ 43s] gawk-x86-arm ################################################## [ 43s] pkg-config-x86-arm ################################################## [ 43s] patch-x86-arm ################################################## [ 43s] rpm-x86-arm ################################################## [ 43s] /bin/rpm.orig-arm already present - skipping. [ 43s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 43s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 43s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 43s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 43s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 43s] nss-softokn-freebl-x86-arm ################################################## [ 43s] m4-x86-arm ################################################## [ 43s] diffutils-x86-arm ################################################## [ 43s] tar-x86-arm ################################################## [ 43s] bzip2-x86-arm ################################################## [ 43s] file-x86-arm ################################################## [ 44s] sqlite-x86-arm ################################################## [ 44s] sed-x86-arm ################################################## [ 44s] expat-x86-arm ################################################## [ 44s] ncurses-libs-x86-arm ################################################## [ 44s] util-linux ################################################## [ 44s] psmisc ################################################## [ 44s] pcre ################################################## [ 44s] patchelf ################################################## [ 44s] e2fsprogs-libs ################################################## [ 44s] net-tools ################################################## [ 44s] removing nis flags from //etc/nsswitch.conf... [ 44s] now finalizing build dir... [ 45s] Warning: spec file parser line 19: can't expand %(...) [ 45s] Warning: spec file parser line 76: can't expand %(...) [ 45s] Warning: spec file parser line 77: can't expand %(...) [ 45s] build target is armv7l-tizen-linux [ 46s] ----------------------------------------------------------------- [ 46s] I have the following modifications for perl-HTML-Parser.spec: [ 46s] 13c13 [ 46s] < Release: 1 [ 46s] --- [ 46s] > Release: %{?release_prefix:%{release_prefix}.}1.5 [ 46s] ----------------------------------------------------------------- [ 46s] ----- building perl-HTML-Parser.spec (user abuild) [ 46s] ----------------------------------------------------------------- [ 46s] ----------------------------------------------------------------- [ 46s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.4:Base/standard/e5d90ab275b069551e5005cccb3337a8-perl-HTML-Parser' /home/abuild/rpmbuild/SOURCES/perl-HTML-Parser.spec [ 46s] Building target platforms: armv7l-tizen-linux [ 46s] Building for target armv7l-tizen-linux [ 46s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.I0kSNL [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + rm -rf HTML-Parser-3.65 [ 46s] + /bin/tar -xf - [ 46s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/HTML-Parser-3.65.tar.gz [ 46s] + STATUS=0 [ 46s] + '[' 0 -ne 0 ']' [ 46s] + cd HTML-Parser-3.65 [ 46s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 46s] + chmod -c a-x eg/hanchors eg/hdump eg/hform eg/hlc eg/hrefsub eg/hstrip eg/htext eg/htextsub eg/htitle [ 46s] mode of `eg/hanchors' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/hdump' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/hlc' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/hrefsub' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/hstrip' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/htext' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/htextsub' changed to 0644 (rw-r--r--) [ 46s] mode of `eg/htitle' changed to 0644 (rw-r--r--) [ 46s] + exit 0 [ 46s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.oJQ09g [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd HTML-Parser-3.65 [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + LD_AS_NEEDED=1 [ 46s] + export LD_AS_NEEDED [ 46s] + test -f Makefile.PL [ 46s] + /usr/bin/perl Makefile.PL INSTALLDIRS=vendor [ 46s] Checking if your kit is complete... [ 46s] Looks good [ 46s] Have /usr/lib/perl5/5.12.1/i386-linux-thread-multi [ 46s] Want /usr/lib/perl5/5.12.1/arm-linux-thread-multi [ 46s] Your perl and your Config.pm seem to have different ideas about the [ 46s] architecture they are running on. [ 46s] Perl thinks: [i386-linux-thread-multi] [ 46s] Config says: [arm-linux-thread-multi] [ 46s] This may or may not cause problems. Please check your installation of perl [ 46s] if you have problems building this extension. [ 46s] Writing Makefile for HTML::Parser [ 46s] + make -j4 [ 46s] /emul/ia32-linux/usr/bin/perl /usr/lib/perl5/5.12.1/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.12.1/ExtUtils/typemap -typemap typemap Parser.xs > Parser.xsc && mv Parser.xsc Parser.c [ 46s] /emul/ia32-linux/usr/bin/perl mkhctype >hctype.h [ 46s] /emul/ia32-linux/usr/bin/perl mkpfunc >pfunc.h [ 46s] Running Mkbootstrap for HTML::Parser () [ 46s] chmod 644 Parser.bs [ 46s] cp Parser.bs blib/arch/auto/HTML/Parser/Parser.bs [ 46s] chmod 644 blib/arch/auto/HTML/Parser/Parser.bs [ 46s] cp lib/HTML/PullParser.pm blib/lib/HTML/PullParser.pm [ 46s] cp Parser.pm blib/lib/HTML/Parser.pm [ 46s] cp lib/HTML/Entities.pm blib/lib/HTML/Entities.pm [ 46s] cp lib/HTML/LinkExtor.pm blib/lib/HTML/LinkExtor.pm [ 46s] cp lib/HTML/TokeParser.pm blib/lib/HTML/TokeParser.pm [ 46s] cp lib/HTML/Filter.pm blib/lib/HTML/Filter.pm [ 46s] cp lib/HTML/HeadParser.pm blib/lib/HTML/HeadParser.pm [ 46s] gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DPERL_USE_SAFE_PUTENV -DVERSION=\"3.65\" -DXS_VERSION=\"3.65\" -fPIC "-I/usr/lib/perl5/5.12.1/arm-linux-thread-multi/CORE" -DMARKED_SECTION Parser.c [ 46s] In file included from Parser.xs:118:0: [ 46s] hparser.c: In function 'parse_start': [ 46s] hparser.c:1270:14: warning: variable 'tag_name_first' set but not used [-Wunused-but-set-variable] [ 46s] hctype_t tag_name_first, tag_name_char; [ 46s] ^ [ 46s] Parser.xs: In function 'XS_HTML__Parser_strict_comment': [ 46s] Parser.xs:482:6: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' [-Wformat=] [ 46s] croak("Unknown boolean attribute (%d)", ix); [ 46s] ^ [ 46s] Parser.xs: In function 'XS_HTML__Parser_ignore_tags': [ 46s] Parser.xs:519:6: warning: format '%d' expects argument of type 'int', but argument 2 has type 'I32' [-Wformat=] [ 46s] croak("Unknown tag-list attribute (%d)", ix); [ 46s] ^ [ 48s] rm -f blib/arch/auto/HTML/Parser/Parser.so [ 48s] gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DPERL_USE_SAFE_PUTENV -L/usr/local/lib Parser.o -o blib/arch/auto/HTML/Parser/Parser.so \ [ 48s] \ [ 48s] [ 48s] chmod 755 blib/arch/auto/HTML/Parser/Parser.so [ 48s] Manifying blib/man3/HTML::PullParser.3pm [ 48s] Manifying blib/man3/HTML::Entities.3pm [ 48s] Manifying blib/man3/HTML::Parser.3pm [ 48s] Manifying blib/man3/HTML::TokeParser.3pm [ 48s] Manifying blib/man3/HTML::LinkExtor.3pm [ 48s] Manifying blib/man3/HTML::HeadParser.3pm [ 48s] Manifying blib/man3/HTML::Filter.3pm [ 48s] + exit 0 [ 48s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IztfeV [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd HTML-Parser-3.65 [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 48s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 48s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 48s] + test -f Makefile.PL [ 48s] + make pure_install PERL_INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 48s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.bs [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/Filter.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/Parser.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/LinkExtor.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/Entities.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/PullParser.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/TokeParser.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/HTML/HeadParser.pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::PullParser.3pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::Filter.3pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::TokeParser.3pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::Entities.3pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::HeadParser.3pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::Parser.3pm [ 48s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::LinkExtor.3pm [ 48s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm -type f -name .packlist -exec rm -f '{}' ';' [ 48s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm -depth -type d -exec rmdir '{}' ';' [ 48s] + find /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm -type f -name '*.bs' -empty -exec rm -f '{}' ';' [ 48s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr [ 48s] + file=/home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::Entities.3pm [ 48s] + iconv -f iso-8859-1 -t utf-8 [ 48s] + mv -f /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::Entities.3pm_ /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/share/man/man3/HTML::Entities.3pm [ 48s] + chmod -R u+w /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr [ 48s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/HTML-Parser-3.65 [ 48s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm/usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so [ 48s] 185 blocks [ 48s] + /usr/lib/rpm/check-buildroot [ 49s] + /usr/lib/rpm//brp-compress [ 49s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 49s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 49s] + /usr/lib/rpm/brp-python-hardlink [ 49s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 49s] Processing files: perl-HTML-Parser-3.65-1.5.armv7l [ 49s] Provides: Parser.so perl(HTML::Entities) = 3.64 perl(HTML::Filter) = 3.57 perl(HTML::HeadParser) = 3.62 perl(HTML::LinkExtor) = 3.60 perl(HTML::Parser) = 3.65 perl(HTML::PullParser) = 3.57 perl(HTML::TokeParser) = 3.57 [ 49s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 49s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) perl >= 0:5.004 perl(Carp) perl(Exporter) perl(HTML::Entities) perl(HTML::Parser) perl(HTML::PullParser) perl(HTML::Tagset) perl(XSLoader) perl(strict) perl(vars) rtld(GNU_HASH) [ 49s] Processing files: perl-HTML-Parser-debuginfo-3.65-1.5.armv7l [ 49s] Processing files: perl-HTML-Parser-debugsource-3.65-1.5.armv7l [ 49s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 49s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-HTML-Parser-3.65-1.5.src.rpm [ 49s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-3.65-1.5.armv7l.rpm [ 49s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debuginfo-3.65-1.5.armv7l.rpm [ 49s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debugsource-3.65-1.5.armv7l.rpm [ 49s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.2amfen [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd HTML-Parser-3.65 [ 49s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-HTML-Parser-3.65-1.5.arm [ 49s] + exit 0 [ 49s] ... checking for files with abuild user/group [ 49s] ... creating baselibs [ 49s] ... comparing built packages with the former built [ 49s] /usr/lib/build/rpm-check.sh [ 49s] compare /.build.oldpackages/perl-HTML-Parser-3.65-1.4.src.rpm /home/abuild/rpmbuild/SRPMS/perl-HTML-Parser-3.65-1.5.src.rpm [ 50s] compare /.build.oldpackages/perl-HTML-Parser-3.65-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-3.65-1.5.armv7l.rpm [ 50s] /usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so differs in ELF sections [ 50s] --- /tmp/tmp.bjwIxkFxMm 2015-10-27 15:33:43.218034313 +0000 [ 50s] +++ /tmp/tmp.SNGwJlyj7q 2015-10-27 15:33:43.242034313 +0000 [ 50s] @@ -3,8 +3,8 @@ [ 50s] [ 50s] Contents of section .note.gnu.build-id: [ 50s] 00f4 04000000 14000000 03000000 474e5500 ............GNU. [ 50s] - 0104 f0bca069 82b3f988 995a4b6a 8ed7113e ...i.....ZKj...> [ 50s] - 0114 ecfe6734 ..g4 [ 50s] + 0104 fb3493ea e610f45e dd1a0d05 f1572a89 .4.....^.....W*. [ 50s] + 0114 f9b7a5e3 .... [ 50s] Contents of section .gnu.hash: [ 50s] 0118 27000000 71000000 04000000 07000000 '...q........... [ 50s] 0128 81614041 c0232089 0826106b a1156000 .a@A.# ..&.k..`. [ 50s] @@ -3412,4 +3412,4 @@ [ 50s] 0030 032201 .". [ 50s] Contents of section .gnu_debuglink: [ 50s] 0000 50617273 65722e73 6f2e6465 62756700 Parser.so.debug. [ 50s] - 0010 2ee2d6af .... [ 50s] + 0010 6302ca99 c... [ 50s] compare /.build.oldpackages/perl-HTML-Parser-debuginfo-3.65-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debuginfo-3.65-1.5.armv7l.rpm [ 50s] --- /tmp/tmp.3z1s1ba73P 2015-10-27 15:33:43.390034314 +0000 [ 50s] +++ /tmp/tmp.YNAXqKts9r 2015-10-27 15:33:43.402034314 +0000 [ 50s] @@ -1,8 +1,8 @@ [ 50s] /usr/lib/debug 0 (none) 40755 root root 0 4294967295 [ 50s] /usr/lib/debug/.build-id 0 (none) 40755 root root 0 4294967295 [ 50s] -/usr/lib/debug/.build-id/f0 0 (none) 40755 root root 0 4294967295 [ 50s] -/usr/lib/debug/.build-id/f0/bca06982b3f988995a4b6a8ed7113eecfe6734 0 (none) 120777 root root 0 4294967295 ../../../perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so [ 50s] -/usr/lib/debug/.build-id/f0/bca06982b3f988995a4b6a8ed7113eecfe6734.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so.debug [ 50s] +/usr/lib/debug/.build-id/fb 0 (none) 40755 root root 0 4294967295 [ 50s] +/usr/lib/debug/.build-id/fb/3493eae610f45edd1a0d05f1572a89f9b7a5e3 0 (none) 120777 root root 0 4294967295 ../../../perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so [ 50s] +/usr/lib/debug/.build-id/fb/3493eae610f45edd1a0d05f1572a89f9b7a5e3.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/perl5/vendor_perl/5.12.1/arm-linux-thread-multi/auto/HTML/Parser/Parser.so.debug [ 50s] /usr/lib/debug/usr 0 (none) 40755 root root 0 4294967295 [ 50s] /usr/lib/debug/usr/lib 0 (none) 40755 root root 0 4294967295 [ 50s] /usr/lib/debug/usr/lib/perl5 0 (none) 40755 root root 0 4294967295 [ 50s] RPM meta information is different [ 50s] compare /.build.oldpackages/perl-HTML-Parser-debugsource-3.65-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debugsource-3.65-1.5.armv7l.rpm [ 50s] ... saving built statistics [ 50s] ... saving built packages [ 50s] /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-3.65-1.5.armv7l.rpm [ 50s] /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debuginfo-3.65-1.5.armv7l.rpm [ 50s] /home/abuild/rpmbuild/RPMS/armv7l/perl-HTML-Parser-debugsource-3.65-1.5.armv7l.rpm [ 50s] /home/abuild/rpmbuild/SRPMS/perl-HTML-Parser-3.65-1.5.src.rpm [ 50s] /home/abuild/rpmbuild/OTHER/_statistics [ 50s] [ 51s] w21 finished "build perl-HTML-Parser.spec" at Tue Oct 27 15:33:43 UTC 2015. [ 51s] [ 56s] [ 49.258427] SysRq : Power Off [ 56s] [ 49.368357] Power down. [ 56s] build: extracting built packages... [ 56s] perl-HTML-Parser-3.65-1.5.armv7l.rpm [ 56s] perl-HTML-Parser-debuginfo-3.65-1.5.armv7l.rpm [ 56s] perl-HTML-Parser-debugsource-3.65-1.5.armv7l.rpm [ 56s] perl-HTML-Parser-3.65-1.5.src.rpm [ 56s] _statistics