[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w25 started "build _service:gbs:perl-Pod-Coverage.spec" at Tue Oct 27 04:31:26 UTC 2015. [ 0s] [ 0s] Building perl-Pod-Coverage for project 'Tizen:2.4:Base' repository 'standard' arch 'armv7l' srcmd5 '28ecc0ae05d36d328403b94b3307d3ab' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:perl-Pod-Coverage.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 2s] [28/52] preinstalling tizen-accelerator... [ 2s] [29/52] preinstalling libfile... [ 2s] [30/52] preinstalling bzip2... [ 2s] [31/52] preinstalling nss... [ 2s] [32/52] preinstalling bzip2-libs-x86-arm... [ 2s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 2s] [34/52] preinstalling glibc-x86-arm... [ 2s] [35/52] preinstalling libacl-x86-arm... [ 2s] [36/52] preinstalling libattr-x86-arm... [ 2s] [37/52] preinstalling libcap-x86-arm... [ 2s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> glibc -> glibc-common [ 4s] breaking dependency glibc-common -> bash [ 4s] cycle: bash -> glibc -> glibc-common -> coreutils [ 4s] breaking dependency glibc-common -> coreutils [ 4s] cycle: glibc -> glibc-common -> findutils [ 4s] breaking dependency glibc-common -> findutils [ 4s] cycle: glibc -> glibc-common [ 4s] breaking dependency glibc-common -> glibc [ 4s] cycle: glibc -> glibc-common -> grep [ 4s] breaking dependency grep -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency glibc -> glibc-common [ 4s] cycle: glibc -> libgcc [ 4s] breaking dependency libgcc -> glibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-devel -> perl-ExtUtils-ParseXS [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 5s] booting kvm ... [ 5s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4697/2392064 files, 223409/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 9s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/_service:gbs:perl-Pod-Coverage.spec ... [ 10s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-Pod-Coverage.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running glibc-x86-arm postinstall script [ 11s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 17s] [1/178] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 17s] [2/178] cumulate kernel-headers-3.4.91-1.1 [ 17s] [3/178] cumulate tizen-release-2.2.0-1.1 [ 17s] [4/178] cumulate tzdata-2014j-1.1 [ 17s] [5/178] cumulate libgcc-4.9.2-2015.02.1.7 [ 17s] [6/178] cumulate setup-0.2-6.43 [ 17s] [7/178] cumulate filesystem-0.1-5.4 [ 18s] [8/178] cumulate glibc-2.20-2014.11.1.7 [ 18s] [9/178] cumulate libstdc++-4.9.2-2015.02.1.7 [ 18s] [10/178] cumulate libatomic-4.9.2-2015.02.1.7 [ 18s] [11/178] cumulate libgomp-4.9.2-2015.02.1.7 [ 18s] [12/178] cumulate openssl-1.0.1p-1.1 [ 18s] [13/178] cumulate bash-4.1-1.1 [ 18s] [14/178] cumulate bzip2-libs-1.0.5-1.5 [ 18s] [15/178] cumulate cpio-2.8-1.1 [ 18s] [16/178] cumulate db4-4.8.30-1.5 [ 19s] [17/178] cumulate diffutils-3.0-1.1 [ 19s] [18/178] cumulate e2fsprogs-libs-1.41.9-4.48 [ 19s] [19/178] cumulate elfutils-libelf-0.152-1.8 [ 19s] [20/178] cumulate expat-2.0.1-1.5 [ 19s] [21/178] cumulate fdupes-1.40-1.1 [ 19s] [22/178] cumulate findutils-4.2.31-4.92 [ 19s] [23/178] cumulate gdbm-1.8.3-1.8 [ 19s] [24/178] cumulate libattr-2.4.44-1.5 [ 19s] [25/178] cumulate libitm-4.9.2-2015.02.1.7 [ 19s] [26/178] cumulate liblua-5.1.4-1.3 [ 19s] [27/178] cumulate libuuid-2.20.2-2.450 [ 20s] [28/178] cumulate m4-1.4.14-1.2 [ 20s] [29/178] cumulate net-tools-1.60-2.1 [ 20s] [30/178] cumulate nspr-4.9-1.6 [ 20s] [31/178] cumulate nss-softokn-freebl-3.12.9-1.12 [ 20s] [32/178] cumulate patch-2.6-1.1 [ 20s] [33/178] cumulate pkg-config-0.25-2.2 [ 20s] [34/178] cumulate popt-1.16-1.5 [ 20s] [35/178] cumulate readline-5.2-1.3 [ 20s] [36/178] cumulate ruby-1.9.2-1.1 [ 20s] [37/178] cumulate sed-4.1.5-1.2 [ 20s] [38/178] cumulate sqlite-3.8.10.2-1.5 [ 20s] [39/178] cumulate xz-libs-5.0.3-1.5 [ 20s] [40/178] cumulate zlib-1.2.8-1.5 [ 20s] [41/178] cumulate libasan-4.9.2-2015.02.1.7 [ 21s] [42/178] cumulate libpcre-7.7-1.19 [ 21s] [43/178] cumulate libubsan-4.9.2-2015.02.1.7 [ 21s] [44/178] cumulate patchelf-0.5.svn20809-1.2 [ 21s] [45/178] cumulate ncurses-libs-5.7-1.5 [ 21s] [46/178] cumulate build-compare-2009.10.14-1.2 [ 21s] [47/178] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 21s] [48/178] cumulate cpp-4.9.2-2015.02.1.7 [ 21s] [49/178] cumulate glibc-headers-2.20-2014.11.1.7 [ 21s] [50/178] cumulate libcap-2.21-1.3 [ 21s] [51/178] cumulate unzip-6.0-1.8 [ 21s] [52/178] cumulate grep-2.5.1a-1.2 [ 21s] [53/178] cumulate libacl-2.2.49-1.2 [ 21s] [54/178] cumulate libfile-5.04-1.4 [ 22s] [55/178] cumulate libpython-2.7.1-1.1 [ 22s] [56/178] cumulate libxml2-2.9.2-1.1 [ 22s] [57/178] cumulate make-3.82-154.1.1 [ 22s] [58/178] cumulate ncurses-5.7-1.5 [ 22s] [59/178] cumulate pcre-7.7-1.19 [ 22s] [60/178] cumulate psmisc-22.20-1.3 [ 22s] [61/178] cumulate binutils-2.25.0-2015.01.1.5 [ 23s] [62/178] cumulate bzip2-1.0.5-1.5 [ 23s] [63/178] cumulate libblkid-2.20.2-2.450 [ 23s] [64/178] cumulate xz-5.0.3-1.5 [ 23s] [65/178] cumulate elfutils-libs-0.152-1.8 [ 23s] [66/178] cumulate nss-3.12.9-1.12 [ 24s] [67/178] cumulate perl-5.12.1-1.20 [ 24s] [68/178] cumulate ncurses-base-5.7-1.5 [ 24s] [69/178] cumulate perl-Devel-Symdump-2.08-1.1 [ 24s] [70/178] cumulate perl-HTML-Tagset-3.20-2.558 [ 24s] [71/178] cumulate perl-IO-Compress-Base-2.008-1.20 [ 24s] [72/178] cumulate perl-Module-Pluggable-3.60-1.20 [ 24s] [73/178] cumulate perl-Package-Constants-0.01-1.20 [ 24s] [74/178] cumulate perl-Pod-Escapes-1.04-1.20 [ 24s] [75/178] cumulate perl-TimeDate-1.20-1.1 [ 24s] [76/178] cumulate perl-URI-1.54-1.1 [ 24s] [77/178] cumulate glibc-devel-2.20-2014.11.1.7 [ 24s] [78/178] cumulate file-5.04-1.4 [ 24s] [79/178] cumulate perl-Compress-Raw-Zlib-2.008-1.20 [ 24s] [80/178] cumulate perl-devel-5.12.1-1.20 [ 25s] [81/178] cumulate perl-libs-5.12.1-1.20 [ 25s] [82/178] cumulate tar-1.17-1.2 [ 25s] [83/178] cumulate coreutils-6.9-1.1 [ 25s] [84/178] cumulate libmount-2.20.2-2.450 [ 25s] [85/178] cumulate xz-lzma-compat-5.0.3-1.5 [ 25s] [86/178] cumulate elfutils-0.152-1.8 [ 25s] [87/178] cumulate nss-sysinit-3.12.9-1.12 [ 25s] [88/178] cumulate python-base-2.7.1-1.1 [ 25s] [89/178] cumulate glibc-common-2.20-2014.11.1.7 [ 25s] [90/178] cumulate libarchive-2.8.3-2.176 [ 25s] [91/178] cumulate rpm-libs-4.9.1-4.3.1.7 [ 25s] [92/178] cumulate libstdc++-devel-4.9.2-2015.02.1.7 [ 25s] [93/178] cumulate perl-ExtUtils-CBuilder-0.21-1.20 [ 25s] [94/178] cumulate perl-ExtUtils-ParseXS-2.18-1.20 [ 25s] [95/178] cumulate perl-Pod-Simple-3.07-1.20 [ 25s] [96/178] cumulate perl-Test-Simple-0.80-1.20 [ 25s] [97/178] cumulate tizen-accelerator-1.0.1-1.1 [ 25s] [98/178] cumulate perl-IO-Compress-Zlib-2.008-1.20 [ 25s] [99/178] cumulate perl-Test-Harness-3.12-1.20 [ 25s] [100/178] cumulate gawk-3.1.5-1.2 [ 25s] [101/178] cumulate gzip-1.3.12-1.2 [ 25s] [102/178] cumulate perl-HTML-Parser-3.65-2.573 [ 25s] [103/178] cumulate python-xml-2.7.1-1.1 [ 25s] [104/178] cumulate build-2011.01.10a-1.1 [ 25s] [105/178] installing rpm-4.9.1-4.3.1.7 [ 26s] [106/178] cumulate util-linux-2.20.2-2.450 [ 26s] [107/178] cumulate cmake-2.8.5-1.2.297 [ 26s] [108/178] cumulate python-2.7.1-2.22 [ 26s] [109/178] cumulate gcc-4.9.2-2015.02.1.7 [ 26s] [110/178] cumulate bzip2-libs-x86-arm-1.0.5-9.1.2 [ 26s] [111/178] cumulate elfutils-libelf-x86-arm-0.152-9.1.2 [ 26s] [112/178] cumulate elfutils-libs-x86-arm-0.152-9.1.2 [ 26s] [113/178] cumulate expat-x86-arm-2.0.1-1.2 [ 26s] [114/178] cumulate glibc-x86-arm-2.20-9.1.2 [ 26s] [115/178] cumulate libacl-x86-arm-2.2.49-9.1.2 [ 26s] [116/178] cumulate libarchive-x86-arm-2.8.3-1.1 [ 26s] [117/178] cumulate libattr-x86-arm-2.4.44-9.1.2 [ 26s] [118/178] cumulate libcap-x86-arm-2.21-9.1.2 [ 26s] [119/178] cumulate libfile-x86-arm-5.04-9.1.2 [ 26s] [120/178] cumulate libgcc-x86-arm-4.9.2-9.1.2 [ 26s] [121/178] cumulate liblua-x86-arm-5.1.4-9.1.1 [ 26s] [122/178] cumulate libpython-x86-arm-2.7.1-9.1.1 [ 26s] [123/178] cumulate libstdc++-x86-arm-4.9.2-9.1.2 [ 26s] [124/178] cumulate libxml2-x86-arm-2.9.2-9.1.1 [ 26s] [125/178] cumulate ncurses-libs-x86-arm-5.7-9.1.1 [ 26s] [126/178] cumulate nspr-x86-arm-4.9-9.1.2 [ 26s] [127/178] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.2 [ 26s] [128/178] cumulate nss-x86-arm-3.12.9-9.1.2 [ 26s] [129/178] cumulate openssl-x86-arm-1.0.1p-9.1.1 [ 26s] [130/178] cumulate perl-ExtUtils-MakeMaker-6.36-1.20 [ 26s] [131/178] cumulate perl-Test-Pod-1.42-1.1 [ 26s] [132/178] cumulate perl-libs-x86-arm-5.12.1-9.1.2 [ 26s] [133/178] cumulate popt-x86-arm-1.16-9.1.2 [ 26s] [134/178] cumulate python-x86-arm-2.7.1-9.1.1 [ 26s] [135/178] cumulate python-xml-x86-arm-2.7.1-9.1.1 [ 26s] [136/178] cumulate rpm-libs-x86-arm-4.9.1-9.1.2 [ 26s] [137/178] cumulate sqlite-x86-arm-3.8.10.2-9.1.1 [ 26s] [138/178] cumulate xz-libs-x86-arm-5.0.3-9.1.2 [ 26s] [139/178] cumulate zlib-x86-arm-1.2.8-9.1.2 [ 26s] [140/178] cumulate gcc-c++-4.9.2-2015.02.1.7 [ 26s] [141/178] cumulate perl-Compress-Zlib-2.008-1.20 [ 26s] [142/178] cumulate rpm-build-4.9.1-4.3.1.7 [ 26s] [143/178] cumulate perl-IO-Zlib-1.07-1.20 [ 26s] [144/178] cumulate bash-x86-arm-4.1-9.1.2 [ 26s] [145/178] cumulate perl-CPAN-1.9205-1.20 [ 26s] [146/178] cumulate diffutils-x86-arm-3.0-9.1.2 [ 26s] [147/178] cumulate fdupes-x86-arm-1.40-9.1.2 [ 26s] [148/178] cumulate findutils-x86-arm-4.2.31-9.1.2 [ 26s] [149/178] cumulate gawk-x86-arm-3.1.5-9.1.1 [ 26s] [150/178] cumulate gzip-x86-arm-1.3.12-9.1.2 [ 26s] [151/178] cumulate m4-x86-arm-1.4.14-9.1.2 [ 26s] [152/178] cumulate make-x86-arm-3.82-9.1.1 [ 26s] [153/178] cumulate patch-x86-arm-2.6-9.1.2 [ 27s] [154/178] cumulate perl-libwww-perl-5.836-2.552 [ 27s] [155/178] cumulate pkg-config-x86-arm-0.25-9.1.2 [ 27s] [156/178] cumulate ruby-x86-arm-1.9.2-9.1.1 [ 27s] [157/178] cumulate sed-x86-arm-4.1.5-9.1.2 [ 27s] [158/178] cumulate bzip2-x86-arm-1.0.5-1.2 [ 27s] [159/178] cumulate perl-x86-arm-5.12.1-9.1.2 [ 27s] [160/178] cumulate python-base-x86-arm-2.7.1-9.1.1 [ 27s] [161/178] cumulate autoconf-2.68-1.1 [ 27s] [162/178] cumulate coreutils-x86-arm-6.9-9.1.2 [ 27s] [163/178] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.1 [ 27s] [164/178] cumulate file-x86-arm-5.04-9.1.2 [ 27s] [165/178] cumulate tar-x86-arm-1.17-9.1.2 [ 27s] [166/178] cumulate elfutils-x86-arm-0.152-9.1.2 [ 27s] [167/178] cumulate cmake-x86-arm-2.8.5-1.1 [ 27s] [168/178] cumulate rpm-x86-arm-4.9.1-9.1.2 [ 27s] [169/178] cumulate rpm-build-x86-arm-4.9.1-9.1.2 [ 27s] [170/178] cumulate automake-1.11.1-1.1 [ 27s] [171/178] cumulate perl-Archive-Tar-1.38-1.20 [ 27s] [172/178] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.1 [ 27s] [173/178] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.1 [ 27s] [174/178] cumulate perl-XML-Parser-2.36-1.2 [ 27s] [175/178] cumulate libtool-2.2.6b-1.5 [ 27s] [176/178] cumulate perl-XML-Parser-x86-arm-2.36-9.1.1 [ 27s] [177/178] cumulate perl-Module-Build-0.2808-1.20 [ 27s] [178/178] now installing cumulated packages [ 27s] Preparing... ################################################## [ 27s] setup ################################################## [ 27s] filesystem ################################################## [ 28s] tzdata ################################################## [ 28s] tizen-release ################################################## [ 28s] kernel-headers ################################################## [ 28s] cross-armv7l-platformfile ################################################## [ 28s] bash ################################################## [ 28s] findutils ################################################## [ 28s] grep ################################################## [ 28s] coreutils ################################################## [ 28s] glibc-common ################################################## [ 28s] libgcc ################################################## [ 28s] /sbin/ldconfig: relative path `1' used to build cache [ 28s] warning: %post(libgcc-4.9.2-2015.02.1.7.armv7l) scriptlet failed, exit status 1 [ 28s] glibc ################################################## [ 28s] libstdc++ ################################################## [ 28s] libattr ################################################## [ 28s] libacl ################################################## [ 28s] libpcre ################################################## [ 28s] tizen-accelerator ################################################## [ 29s] glibc-x86-arm ################################################## [ 29s] libattr-x86-arm ################################################## [ 29s] libacl-x86-arm ################################################## [ 29s] libgcc-x86-arm ################################################## [ 29s] libstdc++-x86-arm ################################################## [ 29s] glibc-headers ################################################## [ 29s] glibc-devel ################################################## [ 29s] libstdc++-devel ################################################## [ 29s] coreutils-x86-arm ################################################## [ 32s] bash-x86-arm ################################################## [ 32s] findutils-x86-arm ################################################## [ 32s] build-compare ################################################## [ 32s] qemu-linux-user-x86-arm ################################################## [ 32s] zlib ################################################## [ 32s] zlib-x86-arm ################################################## [ 32s] bzip2-libs ################################################## [ 32s] bzip2-libs-x86-arm ################################################## [ 32s] elfutils-libelf ################################################## [ 32s] xz-libs ################################################## [ 32s] ncurses-libs ################################################## [ 32s] ncurses ################################################## [ 32s] ncurses-base ################################################## [ 33s] binutils ################################################## [ 33s] libpython ################################################## [ 33s] xz-libs-x86-arm ################################################## [ 33s] elfutils-libelf-x86-arm ################################################## [ 33s] python-base ################################################## [ 33s] libfile ################################################## [ 33s] openssl ################################################## [ 33s] expat ################################################## [ 33s] libuuid ################################################## [ 33s] nspr ################################################## [ 33s] popt ################################################## [ 33s] sed ################################################## [ 33s] sqlite ################################################## [ 33s] popt-x86-arm ################################################## [ 33s] nspr-x86-arm ################################################## [ 33s] libfile-x86-arm ################################################## [ 33s] libblkid ################################################## [ 33s] file ################################################## [ 33s] xz ################################################## [ 33s] elfutils-libs ################################################## [ 33s] elfutils ################################################## [ 33s] bzip2 ################################################## [ 33s] libxml2 ################################################## [ 33s] libarchive ################################################## [ 33s] tar ################################################## [ 33s] libcap ################################################## [ 33s] libcap-x86-arm ################################################## [ 33s] diffutils ################################################## [ 33s] liblua ################################################## [ 33s] liblua-x86-arm ################################################## [ 33s] m4 ################################################## [ 33s] nss-softokn-freebl ################################################## [ 33s] nss ################################################## [ 33s] nss-sysinit ################################################## [ 33s] nss-x86-arm ################################################## [ 33s] rpm-libs ################################################## [ 34s] rpm-libs-x86-arm ################################################## [ 34s] patch ################################################## [ 34s] pkg-config ################################################## [ 34s] gawk ################################################## [ 34s] gzip ################################################## [ 34s] libarchive-x86-arm ################################################## [ 34s] libxml2-x86-arm ################################################## [ 34s] elfutils-libs-x86-arm ################################################## [ 34s] openssl-x86-arm ################################################## [ 34s] libpython-x86-arm ################################################## [ 34s] cmake ################################################## [ 34s] xz-lzma-compat ################################################## [ 34s] libmount ################################################## [ 34s] python-xml ################################################## [ 34s] cpp ################################################## [ 34s] libasan ################################################## [ 34s] libubsan ################################################## [ 34s] libatomic ################################################## [ 34s] libgomp ################################################## [ 34s] cpio ################################################## [ 34s] db4 ################################################## [ 34s] fdupes ################################################## [ 34s] gdbm ################################################## [ 34s] perl-Pod-Escapes ################################################## [ 34s] perl-Compress-Raw-Zlib ################################################## [ 34s] perl-IO-Compress-Base ################################################## [ 34s] perl-Module-Pluggable ################################################## [ 34s] perl-Pod-Simple ################################################## [ 34s] perl-IO-Compress-Zlib ################################################## [ 34s] perl-libs ################################################## [ 35s] perl ################################################## [ 35s] perl-ExtUtils-ParseXS ################################################## [ 35s] perl-devel ################################################## [ 35s] perl-ExtUtils-MakeMaker ################################################## [ 35s] perl-Test-Harness ################################################## [ 35s] perl-CPAN ################################################## [ 35s] perl-Compress-Zlib ################################################## [ 35s] perl-URI ################################################## [ 35s] autoconf ################################################## [ 35s] automake ################################################## [ 35s] perl-IO-Zlib ################################################## [ 35s] perl-ExtUtils-CBuilder ################################################## [ 35s] perl-Test-Simple ################################################## [ 35s] perl-HTML-Tagset ################################################## [ 35s] perl-Package-Constants ################################################## [ 35s] perl-Archive-Tar ################################################## [ 35s] perl-TimeDate ################################################## [ 35s] perl-libs-x86-arm ################################################## [ 36s] perl-x86-arm ################################################## [ 37s] perl-HTML-Parser ################################################## [ 37s] perl-libwww-perl ################################################## [ 37s] perl-XML-Parser ################################################## [ 37s] libitm ################################################## [ 37s] gcc ################################################## [ 37s] gcc-c++ ################################################## [ 38s] cross-armv7l-gcc-accel-x86-a################################################## [ 38s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 38s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 38s] readline ################################################## [ 38s] python ################################################## [ 39s] ruby ################################################## [ 39s] unzip ################################################## [ 39s] rpm-build ################################################## [ 39s] make ################################################## [ 39s] make-x86-arm ################################################## [ 39s] rpm-build-x86-arm ################################################## [ 39s] ruby-x86-arm ################################################## [ 39s] python-x86-arm ################################################## [ 39s] cross-armv7l-binutils-accel-################################################## [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 39s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 40s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 40s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 40s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 40s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 40s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 40s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 40s] perl-XML-Parser-x86-arm ################################################## [ 40s] perl-HTML-Parser-x86-arm ################################################## [ 40s] build ################################################## [ 40s] perl-Module-Build ################################################## [ 40s] perl-Test-Pod ################################################## [ 40s] libtool ################################################## [ 40s] perl-Devel-Symdump ################################################## [ 40s] fdupes-x86-arm ################################################## [ 40s] python-xml-x86-arm ################################################## [ 40s] cmake-x86-arm ################################################## [ 40s] python-base-x86-arm ################################################## [ 41s] elfutils-x86-arm ################################################## [ 41s] gzip-x86-arm ################################################## [ 41s] gawk-x86-arm ################################################## [ 41s] pkg-config-x86-arm ################################################## [ 41s] patch-x86-arm ################################################## [ 41s] rpm-x86-arm ################################################## [ 41s] /bin/rpm.orig-arm already present - skipping. [ 41s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 41s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 41s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 41s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 41s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 41s] nss-softokn-freebl-x86-arm ################################################## [ 41s] m4-x86-arm ################################################## [ 41s] diffutils-x86-arm ################################################## [ 42s] tar-x86-arm ################################################## [ 42s] bzip2-x86-arm ################################################## [ 42s] file-x86-arm ################################################## [ 42s] sqlite-x86-arm ################################################## [ 42s] sed-x86-arm ################################################## [ 42s] expat-x86-arm ################################################## [ 42s] ncurses-libs-x86-arm ################################################## [ 42s] util-linux ################################################## [ 42s] psmisc ################################################## [ 42s] pcre ################################################## [ 42s] patchelf ################################################## [ 42s] e2fsprogs-libs ################################################## [ 42s] net-tools ################################################## [ 42s] removing nis flags from //etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 43s] Warning: spec file parser line 11: can't expand %(...) [ 43s] Warning: spec file parser line 16: can't expand %(...) [ 43s] Warning: spec file parser line 51: can't expand %(...) [ 44s] build target is armv7l-tizen-linux [ 44s] ----------------------------------------------------------------- [ 44s] I have the following modifications for perl-Pod-Coverage.spec: [ 44s] 5c5 [ 44s] < Release: 1 [ 44s] --- [ 44s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 44s] 53a54 [ 44s] > %changelog [ 44s] ----------------------------------------------------------------- [ 44s] ----- building perl-Pod-Coverage.spec (user abuild) [ 44s] ----------------------------------------------------------------- [ 44s] ----------------------------------------------------------------- [ 44s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.4:Base/standard/28ecc0ae05d36d328403b94b3307d3ab-perl-Pod-Coverage' /home/abuild/rpmbuild/SOURCES/perl-Pod-Coverage.spec [ 44s] sh: @__ID_U@: command not found [ 44s] sh: @__ID_U@: command not found [ 44s] Building target platforms: armv7l-tizen-linux [ 44s] Building for target armv7l-tizen-linux [ 44s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.xcZEhc [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + rm -rf Pod-Coverage-0.20 [ 44s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Pod-Coverage-0.20.tar.gz [ 44s] + /bin/tar -xf - [ 44s] + STATUS=0 [ 44s] + '[' 0 -ne 0 ']' [ 44s] + cd Pod-Coverage-0.20 [ 44s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 44s] + exit 0 [ 44s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.em9wZy [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd Pod-Coverage-0.20 [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 44s] + export CFLAGS [ 44s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 44s] + export CXXFLAGS [ 44s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 44s] + export FFLAGS [ 44s] + LD_AS_NEEDED=1 [ 44s] + export LD_AS_NEEDED [ 44s] + /usr/bin/perl Build.PL installdirs=vendor [ 44s] Creating new 'MYMETA.yml' with configuration results [ 44s] Creating new 'Build' script for 'Pod-Coverage' version '0.20' [ 44s] + ./Build [ 44s] Building Pod-Coverage [ 44s] + exit 0 [ 44s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.DWvMQW [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd Pod-Coverage-0.20 [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 44s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 44s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 44s] + ./Build install destdir=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm create_packlist=0 [ 44s] Building Pod-Coverage [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage/ExportOnly.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage/CountParents.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.12.1/Pod/Coverage/Overloader.pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/man/man3/Pod::Coverage::Overloader.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/man/man3/Pod::Coverage::ExportOnly.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/man/man3/Pod::Coverage::CountParents.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/man/man3/Pod::Coverage.3pm [ 44s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/bin/pod_cover [ 44s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm -depth -type d -exec rmdir '{}' ';' [ 44s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/Pod-Coverage-0.20 [ 44s] + /usr/lib/rpm/check-buildroot [ 44s] + /usr/lib/rpm//brp-compress [ 44s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 44s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 44s] + /usr/lib/rpm/brp-python-hardlink [ 44s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 44s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.JaRK4l [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd Pod-Coverage-0.20 [ 44s] + unset DISPLAY [ 44s] + ./Build test [ 45s] t/01compile.t ..... ok [ 45s] t/02simple.t ...... ok [ 45s] t/03import.t ...... ok [ 45s] t/04cvgv.t ........ ok [ 45s] t/05parentage.t ... ok [ 45s] t/06trustme.t ..... ok [ 45s] t/07pod.t ......... ok [ 45s] t/08tie.t ......... ok [ 45s] t/09whitespace.t .. ok [ 45s] All tests successful. [ 45s] Files=9, Tests=71, 0 wallclock secs ( 0.02 usr 0.02 sys + 0.38 cusr 0.02 csys = 0.44 CPU) [ 45s] Result: PASS [ 45s] + exit 0 [ 45s] Processing files: perl-Pod-Coverage-0.20-1.1.noarch [ 45s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.MKN7uN [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd Pod-Coverage-0.20 [ 45s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/doc/perl-Pod-Coverage-0.20 [ 45s] + export DOCDIR [ 45s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/doc/perl-Pod-Coverage-0.20 [ 45s] + cp -pr Changes examples/ /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm/usr/share/doc/perl-Pod-Coverage-0.20 [ 45s] + exit 0 [ 45s] Provides: perl(Pod::Coverage) = 0.20 perl(Pod::Coverage::CountParents) perl(Pod::Coverage::ExportOnly) perl(Pod::Coverage::Extractor) perl(Pod::Coverage::Overloader) [ 45s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 45s] Requires: /emul/ia32-linux/usr/bin/perl perl(B) perl(Devel::Symdump) perl(Pod::Coverage) perl(Pod::Find) perl(Pod::Parser) perl(base) perl(constant) perl(lib) perl(strict) perl(vars) [ 45s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 45s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Pod-Coverage-0.20-1.1.src.rpm [ 45s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Pod-Coverage-0.20-1.1.noarch.rpm [ 45s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.WXOWy8 [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd Pod-Coverage-0.20 [ 45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Pod-Coverage-0.20-1.1.arm [ 45s] + exit 0 [ 45s] ... checking for files with abuild user/group [ 45s] ... creating baselibs [ 45s] ... saving built statistics [ 45s] ... saving built packages [ 45s] /home/abuild/rpmbuild/RPMS/noarch/perl-Pod-Coverage-0.20-1.1.noarch.rpm [ 45s] /home/abuild/rpmbuild/SRPMS/perl-Pod-Coverage-0.20-1.1.src.rpm [ 45s] /home/abuild/rpmbuild/OTHER/_statistics [ 46s] [ 46s] w25 finished "build perl-Pod-Coverage.spec" at Tue Oct 27 04:32:11 UTC 2015. [ 46s] [ 49s] /.build/build: line 368: 235 Killed background_monitor_process [ 51s] [ 43.814880] SysRq : Power Off [ 51s] [ 43.924315] Power down. [ 51s] build: extracting built packages... [ 51s] perl-Pod-Coverage-0.20-1.1.noarch.rpm [ 51s] perl-Pod-Coverage-0.20-1.1.src.rpm [ 51s] _statistics Retried build at Tue Oct 27 00:49:48 2015 returned same result, skipped Retried build at Tue Oct 27 02:33:55 2015 returned same result, skipped Retried build at Tue Oct 27 02:59:09 2015 returned same result, skipped Retried build at Tue Oct 27 08:33:20 2015 returned same result, skipped