[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w14 started "build _service:gbs:capi-ui-inputmethod.spec" at Mon Mar 7 03:14:46 UTC 2016. [ 0s] [ 0s] Building capi-ui-inputmethod for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'ca46bdc2a56c618bfb2afab768ec6e57' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:capi-ui-inputmethod.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:capi-ui-inputmethod.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:capi-ui-inputmethod.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> glibc -> glibc-common [ 3s] breaking dependency glibc-common -> bash [ 3s] cycle: bash -> glibc -> glibc-common -> coreutils [ 3s] breaking dependency glibc-common -> coreutils [ 3s] cycle: glibc -> glibc-common -> findutils [ 3s] breaking dependency glibc-common -> findutils [ 3s] cycle: glibc -> glibc-common [ 3s] breaking dependency glibc-common -> glibc [ 3s] cycle: glibc -> glibc-common -> grep [ 3s] breaking dependency grep -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency glibc -> glibc-common [ 3s] cycle: glibc -> libgcc [ 3s] breaking dependency libgcc -> glibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: gio-branding-upstream -> libgio [ 3s] breaking dependency libgio -> gio-branding-upstream [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: libkey-manager-client -> key-manager [ 3s] breaking dependency key-manager -> libkey-manager-client [ 3s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 3s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 3s] cycle: xmlsec1-openssl -> xmlsec1 [ 3s] breaking dependency xmlsec1-openssl -> xmlsec1 [ 3s] cycle: efl -> eina [ 3s] breaking dependency eina -> efl [ 3s] cycle: efl -> eo [ 3s] breaking dependency eo -> efl [ 3s] cycle: ecore -> eldbus [ 3s] breaking dependency ecore -> eldbus [ 3s] cycle: ecore -> evas [ 3s] breaking dependency ecore -> evas [ 3s] cycle: libsensord -> sensord [ 3s] breaking dependency sensord -> libsensord [ 3s] cycle: syspopup -> syspopup-caller [ 3s] breaking dependency syspopup -> syspopup-caller [ 3s] cycle: pulseaudio-libs -> pulseaudio [ 3s] breaking dependency pulseaudio -> pulseaudio-libs [ 3s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 3s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 4s] booting kvm ... [ 4s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=unsafe -drive file=/srv/build/root_8/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_8/swap,if=virtio,cache=unsafe -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 5060/2392064 files, 233623/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 7s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: armv7l [ 7s] swapon on /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:capi-ui-inputmethod.spec ... [ 8s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-ui-inputmethod.spec build rpmlint-Factory ... [ 8s] running rpm-x86-arm postinstall script [ 8s] running rpm-libs-x86-arm postinstall script [ 8s] running tizen-accelerator postinstall script [ 9s] running glibc-x86-arm postinstall script [ 9s] running bash-x86-arm postinstall script [ 9s] initializing rpm db... [ 16s] [1/357] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 16s] [2/357] cumulate kernel-headers-3.4.91-1.1 [ 16s] [3/357] cumulate libX11-common-1.6.2-1.1 [ 16s] [4/357] cumulate tizen-release-2.2.0-1.1 [ 16s] [5/357] cumulate tzdata-2014j-1.1 [ 16s] [6/357] cumulate libgcc-4.9.2-2015.02.1.11 [ 16s] [7/357] cumulate setup-0.2-1.1 [ 16s] [8/357] cumulate filesystem-0.1-1.1 [ 16s] [9/357] cumulate glibc-2.20-2014.11.1.10 [ 16s] [10/357] cumulate libstdc++-4.9.2-2015.02.1.11 [ 16s] [11/357] cumulate libatomic-4.9.2-2015.02.1.11 [ 16s] [12/357] cumulate libgomp-4.9.2-2015.02.1.11 [ 16s] [13/357] cumulate openssl-1.0.1p-1.5 [ 16s] [14/357] cumulate smack-1.0+s14-1.8 [ 17s] [15/357] cumulate bash-4.1-1.6 [ 17s] [16/357] cumulate bzip2-libs-1.0.5-1.8 [ 17s] [17/357] cumulate capi-base-common-0.2.2-1.1 [ 17s] [18/357] cumulate coregl-4.0-1.1 [ 17s] [19/357] cumulate cpio-2.8-1.6 [ 17s] [20/357] cumulate db4-4.8.30-1.8 [ 17s] [21/357] cumulate diffutils-3.0-1.6 [ 17s] [22/357] cumulate e2fsprogs-libs-1.41.9-1.4 [ 17s] [23/357] cumulate elfutils-libelf-0.152-1.12 [ 17s] [24/357] cumulate expat-2.0.1-1.8 [ 17s] [25/357] cumulate fdupes-1.40-1.5 [ 17s] [26/357] cumulate findutils-4.2.31-1.5 [ 17s] [27/357] cumulate fribidi-0.19.6-1.1 [ 17s] [28/357] cumulate gdbm-1.8.3-1.12 [ 17s] [29/357] cumulate iniparser-3.1-1.1 [ 17s] [30/357] cumulate libXau-1.0.8-1.1 [ 17s] [31/357] cumulate libasound-1.0.25-1.0.25-1.1 [ 17s] [32/357] cumulate libattr-2.4.44-1.8 [ 17s] [33/357] cumulate libdrm2-2.4.35-1.1 [ 17s] [34/357] cumulate libffi-3.1-1.1 [ 17s] [35/357] cumulate libglib-2.44.1-1.1 [ 17s] [36/357] cumulate libitm-4.9.2-2015.02.1.11 [ 17s] [37/357] cumulate libjpeg-turbo-1.2.0-1.1 [ 17s] [38/357] cumulate libjson-0.12-1.1 [ 17s] [39/357] cumulate liblua-5.1.4-1.6 [ 17s] [40/357] cumulate libogg-1.2.1-1.1 [ 17s] [41/357] cumulate libtool-ltdl-2.2.6b-1.8 [ 17s] [42/357] cumulate libunwind-1.1-1.1 [ 17s] [43/357] cumulate libuuid-2.20.2-1.4 [ 17s] [44/357] cumulate m4-1.4.14-1.5 [ 17s] [45/357] cumulate net-tools-1.60-2.6 [ 17s] [46/357] cumulate nspr-4.9-1.9 [ 17s] [47/357] cumulate nss-softokn-freebl-3.12.9-1.17 [ 17s] [48/357] cumulate patch-2.6-1.6 [ 17s] [49/357] cumulate pkg-config-0.25-2.6 [ 17s] [50/357] cumulate popt-1.16-1.8 [ 17s] [51/357] cumulate readline-5.2-1.6 [ 17s] [52/357] cumulate ruby-1.9.2-1.6 [ 17s] [53/357] cumulate sed-4.1.5-1.5 [ 17s] [54/357] cumulate speex-1.2rc1-1.1 [ 17s] [55/357] cumulate sqlite-3.8.10.2-1.8 [ 17s] [56/357] cumulate xz-libs-5.0.3-1.8 [ 17s] [57/357] cumulate zlib-1.2.8-1.8 [ 17s] [58/357] cumulate libasan-4.9.2-2015.02.1.11 [ 17s] [59/357] cumulate libpcre-7.7-1.25 [ 17s] [60/357] cumulate libtiff-4.0.2-1.1 [ 17s] [61/357] cumulate libubsan-4.9.2-2015.02.1.11 [ 17s] [62/357] cumulate patchelf-0.5.svn20809-1.5 [ 17s] [63/357] cumulate ncurses-libs-5.7-1.8 [ 17s] [64/357] cumulate build-compare-2009.10.14-1.6 [ 17s] [65/357] cumulate libleveldb-1.1_17-1.1 [ 17s] [66/357] cumulate pkgmgr-0.3.37-1.2 [ 17s] [67/357] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 17s] [68/357] cumulate appfw-env-0.0.1-1.1 [ 17s] [69/357] cumulate capi-base-common-devel-0.2.2-1.1 [ 17s] [70/357] cumulate cpp-4.9.2-2015.02.1.11 [ 17s] [71/357] cumulate fribidi-devel-0.19.6-1.1 [ 17s] [72/357] cumulate glibc-headers-2.20-2014.11.1.10 [ 17s] [73/357] cumulate libcap-2.21-1.6 [ 17s] [74/357] cumulate liblua-devel-5.1.4-1.6 [ 17s] [75/357] cumulate libscl-common-0.4.1-1.1 [ 17s] [76/357] cumulate openssl-devel-1.0.1p-1.5 [ 17s] [77/357] cumulate smack-devel-1.0+s14-1.8 [ 17s] [78/357] cumulate unzip-6.0-1.12 [ 18s] [79/357] cumulate zlib-devel-1.2.8-1.8 [ 18s] [80/357] cumulate grep-2.5.1a-1.5 [ 18s] [81/357] cumulate libacl-2.2.49-1.5 [ 18s] [82/357] cumulate libfile-5.04-1.7 [ 18s] [83/357] cumulate libgmodule-2.44.1-1.1 [ 18s] [84/357] cumulate libgthread-2.44.1-1.1 [ 18s] [85/357] cumulate libiri-1.7-1.1 [ 18s] [86/357] cumulate libpng-1.2.50-1.1 [ 18s] [87/357] cumulate libpython-2.7.1-1.5 [ 18s] [88/357] cumulate libvorbis-1.2.3-1.1 [ 18s] [89/357] cumulate libwayland-client-1.7.0-1.1 [ 18s] [90/357] cumulate libwayland-server-1.7.0-1.1 [ 18s] [91/357] cumulate libxcb-1.10.0-1.1 [ 18s] [92/357] cumulate libxml2-2.9.2-1.3 [ 18s] [93/357] cumulate make-3.82-154.1.6 [ 18s] [94/357] cumulate minizip-1.2.8-1.8 [ 18s] [95/357] cumulate ncurses-5.7-1.8 [ 18s] [96/357] cumulate pcre-7.7-1.25 [ 18s] [97/357] cumulate psmisc-22.20-1.6 [ 18s] [98/357] cumulate smack-utils-1.0+s14-1.8 [ 18s] [99/357] cumulate vasum-0.3.1-1.1 [ 18s] [100/357] cumulate binutils-2.25.0-2015.01.1.8 [ 18s] [101/357] cumulate bzip2-1.0.5-1.8 [ 18s] [102/357] cumulate kmod-libs-15-1.1 [ 18s] [103/357] cumulate libblkid-2.20.2-1.4 [ 18s] [104/357] cumulate libgobject-2.44.1-1.1 [ 18s] [105/357] cumulate libicu-51-1.1 [ 18s] [106/357] cumulate xz-5.0.3-1.8 [ 18s] [107/357] cumulate elfutils-libs-0.152-1.12 [ 18s] [108/357] cumulate ttrace-1.0.0-1.1 [ 18s] [109/357] cumulate nss-3.12.9-1.17 [ 18s] [110/357] cumulate perl-5.12.1-1.25 [ 18s] [111/357] cumulate ncurses-base-5.7-1.8 [ 18s] [112/357] cumulate perl-HTML-Tagset-3.20-1.1 [ 18s] [113/357] cumulate perl-IO-Compress-Base-2.008-1.25 [ 18s] [114/357] cumulate perl-Module-Pluggable-3.60-1.25 [ 18s] [115/357] cumulate perl-Pod-Escapes-1.04-1.25 [ 18s] [116/357] cumulate perl-TimeDate-1.20-1.1 [ 18s] [117/357] cumulate perl-URI-1.54-1.1 [ 18s] [118/357] cumulate ca-certificates-0.0.1-1.1 [ 18s] [119/357] cumulate glibc-devel-2.20-2014.11.1.10 [ 18s] [120/357] cumulate libicu-devel-51-1.1 [ 18s] [121/357] cumulate libscl-common-devel-0.4.1-1.1 [ 18s] [122/357] cumulate smack-privilege-config-1.0.8-1.1 [ 18s] [123/357] cumulate file-5.04-1.7 [ 18s] [124/357] cumulate libwayland-cursor-1.7.0-1.1 [ 18s] [125/357] cumulate libxslt-1.1.28-1.2 [ 18s] [126/357] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 18s] [127/357] cumulate perl-libs-5.12.1-1.25 [ 18s] [128/357] cumulate svi-data-0.1.3-1.2 [ 18s] [129/357] cumulate tar-1.17-1.6 [ 18s] [130/357] cumulate coreutils-6.9-1.6 [ 18s] [131/357] cumulate freetype-2.5.5-1.1 [ 18s] [132/357] cumulate libX11-1.6.2-1.1 [ 18s] [133/357] cumulate libdlog-0.4.1-1.1 [ 18s] [134/357] cumulate libmount-2.20.2-1.4 [ 18s] [135/357] cumulate libpng-devel-1.2.50-1.1 [ 18s] [136/357] cumulate libsndfile-1.0.25-1.1 [ 18s] [137/357] cumulate xz-lzma-compat-5.0.3-1.8 [ 18s] [138/357] cumulate elfutils-0.152-1.12 [ 18s] [139/357] cumulate nss-sysinit-3.12.9-1.17 [ 18s] [140/357] cumulate python-base-2.7.1-1.5 [ 18s] [141/357] cumulate glibc-common-2.20-2014.11.1.10 [ 18s] [142/357] cumulate libgio-2.44.1-1.1 [ 19s] [143/357] cumulate libarchive-2.8.3-1.2 [ 19s] [144/357] cumulate rpm-libs-4.9.1-4.3.1.10 [ 19s] [145/357] cumulate gio-branding-upstream-2.44.1-1.1 [ 19s] [146/357] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 19s] [147/357] cumulate perl-Pod-Simple-3.07-1.25 [ 19s] [148/357] cumulate tizen-accelerator-1.0.1-1.1 [ 19s] [149/357] cumulate giflib-4.1.6-1.1 [ 19s] [150/357] cumulate libXcomposite-0.4.4-1.1 [ 19s] [151/357] cumulate libXdamage-1.1.4-1.1 [ 19s] [152/357] cumulate libXext-1.3.2-1.1 [ 19s] [153/357] cumulate libXfixes-5.0.1-1.1 [ 19s] [154/357] cumulate libXrender-0.9.8-1.1 [ 19s] [155/357] cumulate libdlog-devel-0.4.1-1.1 [ 19s] [156/357] cumulate libtremolo-0.0.12-1.1 [ 19s] [157/357] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 19s] [158/357] cumulate tizen-security-policy-1.2.2.1-1.1 [ 19s] [159/357] cumulate gawk-3.1.5-1.6 [ 19s] [160/357] cumulate gzip-1.3.12-1.6 [ 19s] [161/357] cumulate harfbuzz-0.9.40-1.1 [ 19s] [162/357] cumulate pam-1.1.5-1.5 [ 19s] [163/357] cumulate perl-HTML-Parser-3.65-1.5 [ 19s] [164/357] cumulate python-xml-2.7.1-1.5 [ 19s] [165/357] cumulate xdgmime-0.0.12-1.1 [ 19s] [166/357] cumulate app-checker-0.0.20-1.1 [ 19s] [167/357] cumulate autoconf-2.68-1.1 [ 19s] [168/357] cumulate build-2011.01.10a-1.1 [ 19s] [169/357] cumulate bundle-0.1.36-1.1 [ 19s] [170/357] cumulate freetype-devel-2.5.5-1.1 [ 19s] [171/357] installing rpm-4.9.1-4.3.1.10 [ 19s] [172/357] cumulate libslp-db-util-0.1.8-1.1 [ 19s] [173/357] cumulate python-lxml-2.2.3-1.2 [ 19s] [174/357] cumulate sys-assert-0.3.2-1.1 [ 19s] [175/357] cumulate capi-system-info-0.2.0-1.1 [ 19s] [176/357] cumulate dbus-1.8.16-2.1 [ 19s] [177/357] cumulate glib2-tools-2.44.1-1.1 [ 19s] [178/357] cumulate util-linux-2.20.2-1.4 [ 19s] [179/357] cumulate wayland-devel-1.7.0-1.1 [ 19s] [180/357] cumulate xmlsec1-openssl-1.2.14-1.1 [ 19s] [181/357] cumulate cmake-2.8.5-1.1.2 [ 19s] [182/357] cumulate fontconfig-2.11.92-1.1 [ 19s] [183/357] cumulate python-2.7.1-1.3 [ 19s] [184/357] cumulate gcc-4.9.2-2015.02.1.11 [ 19s] [185/357] cumulate automake-1.11.1-1.1 [ 20s] [186/357] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 20s] [187/357] cumulate dbus-libs-1.8.16-2.1 [ 20s] [188/357] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 20s] [189/357] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 20s] [190/357] cumulate expat-x86-arm-2.0.1-1.4 [ 20s] [191/357] cumulate fontconfig-devel-2.11.92-1.1 [ 20s] [192/357] cumulate glibc-x86-arm-2.20-9.1.5 [ 20s] [193/357] cumulate harfbuzz-devel-0.9.40-1.1 [ 20s] [194/357] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 20s] [195/357] cumulate libarchive-x86-arm-2.8.3-1.3 [ 20s] [196/357] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 20s] [197/357] cumulate libcap-x86-arm-2.21-9.1.4 [ 20s] [198/357] cumulate libfile-x86-arm-5.04-9.1.4 [ 20s] [199/357] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 20s] [200/357] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 20s] [201/357] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 20s] [202/357] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 20s] [203/357] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 20s] [204/357] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 20s] [205/357] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 20s] [206/357] cumulate nspr-x86-arm-4.9-9.1.5 [ 20s] [207/357] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 20s] [208/357] cumulate nss-x86-arm-3.12.9-9.1.5 [ 20s] [209/357] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 20s] [210/357] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 20s] [211/357] cumulate popt-x86-arm-1.16-9.1.4 [ 20s] [212/357] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 20s] [213/357] cumulate python-x86-arm-2.7.1-9.1.3 [ 20s] [214/357] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 20s] [215/357] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 20s] [216/357] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 20s] [217/357] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 20s] [218/357] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 20s] [219/357] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 20s] [220/357] cumulate libXgesture-0.1.1-1.1 [ 20s] [221/357] cumulate libXi-1.7.3-1.1 [ 20s] [222/357] cumulate libXinerama-1.1.3-1.1 [ 20s] [223/357] cumulate libXtst-1.2.4-1.1 [ 20s] [224/357] cumulate libXv-1.0.10-1.1 [ 20s] [225/357] cumulate libdri2-0.2.1-1.1 [ 20s] [226/357] cumulate perl-Compress-Zlib-2.008-1.25 [ 20s] [227/357] cumulate systemd-libs-216-1.2 [ 20s] [228/357] cumulate app-checker-server-0.0.20-1.1 [ 20s] [229/357] cumulate eventsystem-0.0.1-1.1 [ 20s] [230/357] cumulate libXcursor-1.1.14-1.1 [ 20s] [231/357] cumulate libXrandr-1.4.2-1.1 [ 20s] [232/357] cumulate librua-0.1.8-1.1 [ 20s] [233/357] cumulate xmlsec1-1.2.14-1.1 [ 20s] [234/357] cumulate glib2-devel-2.44.1-1.1 [ 20s] [235/357] cumulate rpm-build-4.9.1-4.3.1.10 [ 20s] [236/357] cumulate bash-x86-arm-4.1-9.1.4 [ 20s] [237/357] cumulate dbus-devel-1.8.16-2.1 [ 20s] [238/357] cumulate diffutils-x86-arm-3.0-9.1.4 [ 20s] [239/357] cumulate fdupes-x86-arm-1.40-9.1.4 [ 20s] [240/357] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 20s] [241/357] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 20s] [242/357] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 20s] [243/357] cumulate libtool-2.2.6b-1.8 [ 20s] [244/357] cumulate m4-x86-arm-1.4.14-9.1.4 [ 20s] [245/357] cumulate make-x86-arm-3.82-9.1.3 [ 20s] [246/357] cumulate patch-x86-arm-2.6-9.1.4 [ 20s] [247/357] cumulate perl-libwww-perl-5.836-1.1 [ 20s] [248/357] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 21s] [249/357] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 21s] [250/357] cumulate sed-x86-arm-4.1.5-9.1.4 [ 21s] [251/357] cumulate bzip2-x86-arm-1.0.5-1.4 [ 21s] [252/357] cumulate libcom-core-1.0.2-1.1 [ 21s] [253/357] cumulate perl-x86-arm-5.12.1-9.1.5 [ 21s] [254/357] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 21s] [255/357] cumulate coreutils-x86-arm-6.9-9.1.4 [ 21s] [256/357] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 21s] [257/357] cumulate dbus-glib-0.100-1.1 [ 21s] [258/357] cumulate eina-1.13.26-2.2 [ 21s] [259/357] cumulate file-x86-arm-5.04-9.1.4 [ 21s] [260/357] cumulate libkey-manager-common-0.1.13-1.1 [ 21s] [261/357] cumulate libtbm-1.1.8-1.1 [ 21s] [262/357] cumulate tar-x86-arm-1.17-9.1.4 [ 21s] [263/357] cumulate bluez-5.30-2.1 [ 21s] [264/357] cumulate libslp-utilx-0.5.4-1.1 [ 21s] [265/357] cumulate sensord-1.2.0-1.1 [ 21s] [266/357] cumulate elfutils-x86-arm-0.152-9.1.4 [ 21s] [267/357] cumulate systemd-216-1.2 [ 21s] [268/357] cumulate cmake-x86-arm-2.8.5-1.3 [ 21s] [269/357] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 21s] [270/357] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 21s] [271/357] cumulate systemd-devel-216-1.2 [ 21s] [272/357] cumulate eo-1.13.26-2.2 [ 21s] [273/357] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 21s] [274/357] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 21s] [275/357] cumulate perl-XML-Parser-2.36-1.6 [ 21s] [276/357] cumulate vconf-0.2.84-1.2 [ 21s] [277/357] cumulate security-server-0.0.132-1.1 [ 21s] [278/357] cumulate efl-1.13.26-2.2 [ 21s] [279/357] cumulate eina-devel-1.13.26-2.2 [ 21s] [280/357] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 21s] [281/357] cumulate libsecurity-server-client-0.0.132-1.1 [ 21s] [282/357] cumulate audio-session-manager-0.4.23-1.2 [ 21s] [283/357] cumulate capi-system-device-0.1.0-1.2 [ 21s] [284/357] cumulate libsensord-1.2.0-1.1 [ 21s] [285/357] cumulate pkgmgr-info-0.0.230-1.2 [ 21s] [286/357] cumulate eo-devel-1.13.26-2.2 [ 21s] [287/357] cumulate embryo-1.13.26-2.2 [ 21s] [288/357] cumulate ector-1.13.26-2.2 [ 21s] [289/357] cumulate libmm-session-0.4.16-1.1 [ 21s] [290/357] cumulate libprivilege-control-0.0.93-1.1 [ 21s] [291/357] cumulate eet-1.13.26-2.2 [ 21s] [292/357] cumulate ss-server-0.12.13-1.1 [ 21s] [293/357] cumulate pkgmgr-installer-0.3.37-1.2 [ 21s] [294/357] cumulate pkgmgr-info-parser-0.0.230-1.2 [ 21s] [295/357] cumulate privacy-manager-server-0.0.6-1.1 [ 21s] [296/357] cumulate pulseaudio-4.0.208-1.2 [ 21s] [297/357] cumulate embryo-devel-1.13.26-2.2 [ 21s] [298/357] cumulate efl-devel-1.13.26-2.2 [ 21s] [299/357] cumulate eet-devel-1.13.26-2.2 [ 21s] [300/357] cumulate libss-client-0.12.13-1.1 [ 21s] [301/357] cumulate pulseaudio-libs-4.0.208-1.2 [ 21s] [302/357] cumulate pkgmgr-client-0.3.37-1.2 [ 21s] [303/357] cumulate ecore-1.13.26-2.2 [ 21s] [304/357] cumulate ector-devel-1.13.26-2.2 [ 21s] [305/357] cumulate eio-1.13.26-2.2 [ 21s] [306/357] cumulate eldbus-1.13.26-2.2 [ 21s] [307/357] cumulate eeze-1.13.26-2.2 [ 21s] [308/357] cumulate key-manager-0.1.13-1.1 [ 21s] [309/357] cumulate evas-1.13.26-2.2 [ 22s] [310/357] cumulate edbus-1.6.0+svn.76526slp2+build11-1.1 [ 22s] [311/357] cumulate libkey-manager-client-0.1.13-1.1 [ 22s] [312/357] cumulate efreet-1.13.26-2.2 [ 22s] [313/357] cumulate edje-1.13.26-2.2 [ 22s] [314/357] cumulate evas-devel-1.13.26-2.2 [ 22s] [315/357] cumulate edje-tools-1.13.26-2.2 [ 22s] [316/357] cumulate ecore-devel-1.13.26-2.2 [ 22s] [317/357] cumulate emotion-1.13.26-2.2 [ 22s] [318/357] cumulate resourced-0.2.86-1.3 [ 22s] [319/357] cumulate cert-svc-1.0.2-1.1 [ 22s] [320/357] cumulate libresourced-0.2.86-1.3 [ 22s] [321/357] cumulate eio-devel-1.13.26-2.2 [ 22s] [322/357] cumulate eldbus-devel-1.13.26-2.2 [ 22s] [323/357] cumulate edbus-devel-1.6.0+svn.76526slp2+build11-1.1 [ 22s] [324/357] cumulate ethumb-1.13.26-2.2 [ 22s] [325/357] cumulate efreet-devel-1.13.26-2.2 [ 22s] [326/357] cumulate edje-devel-1.13.26-2.2 [ 22s] [327/357] cumulate elementary-1.13.33-1.1 [ 22s] [328/357] cumulate aul-0.2.3.0-1.2 [ 22s] [329/357] cumulate app-svc-0.1.78-1.1 [ 22s] [330/357] cumulate capi-appfw-app-manager-0.2.8-1.1 [ 22s] [331/357] cumulate ethumb-devel-1.13.26-2.2 [ 22s] [332/357] cumulate app-core-common-1.3.40-1.2 [ 22s] [333/357] cumulate efl-extension-0.2.19-1.1 [ 22s] [334/357] cumulate privacy-manager-client-0.0.6-1.1 [ 22s] [335/357] cumulate syspopup-0.0.135-1.3 [ 22s] [336/357] cumulate security-privilege-checker-0.0.4-1.2 [ 22s] [337/357] cumulate app-core-efl-1.3.40-1.2 [ 22s] [338/357] cumulate bluetooth-frwk-0.2.149-2.2 [ 22s] [339/357] cumulate elementary-devel-1.13.33-1.1 [ 22s] [340/357] cumulate syspopup-caller-0.0.135-1.3 [ 22s] [341/357] cumulate alarm-server-0.4.179-1.2 [ 22s] [342/357] cumulate capi-network-bluetooth-0.1.53-2.1 [ 22s] [343/357] cumulate capi-appfw-package-manager-0.0.49-1.2 [ 22s] [344/357] cumulate libalarm-0.4.179-1.2 [ 22s] [345/357] cumulate libmm-sound-0.9.255-1.3 [ 22s] [346/357] cumulate capi-appfw-application-0.3.1.0-1.3 [ 22s] [347/357] cumulate capi-media-audio-io-0.2.34-1.2 [ 22s] [348/357] cumulate capi-media-sound-manager-0.3.24-1.3 [ 22s] [349/357] cumulate libfeedback-0.1.3-1.2 [ 22s] [350/357] cumulate notification-0.2.41-1.2 [ 22s] [351/357] cumulate tts-0.2.43-2.1 [ 22s] [352/357] cumulate isf-2.4.9516-2.1 [ 22s] [353/357] cumulate isf-devel-2.4.9516-2.1 [ 22s] [354/357] cumulate org.tizen.isf-kbd-mode-changer-2.4.9516-2.1 [ 22s] [355/357] cumulate libscl-core-0.4.5-1.2 [ 22s] [356/357] cumulate libscl-core-devel-0.4.5-1.2 [ 22s] [357/357] now installing cumulated packages [ 23s] Preparing... ################################################## [ 23s] setup ################################################## [ 23s] filesystem ################################################## [ 23s] tzdata ################################################## [ 23s] libX11-common ################################################## [ 23s] tizen-release ################################################## [ 23s] kernel-headers ################################################## [ 23s] cross-armv7l-platformfile ################################################## [ 23s] bash ################################################## [ 23s] findutils ################################################## [ 23s] grep ################################################## [ 23s] coreutils ################################################## [ 23s] glibc-common ################################################## [ 23s] libgcc ################################################## [ 23s] /sbin/ldconfig: relative path `1' used to build cache [ 23s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 23s] glibc ################################################## [ 23s] libstdc++ ################################################## [ 23s] libattr ################################################## [ 23s] libacl ################################################## [ 23s] libpcre ################################################## [ 23s] tizen-accelerator ################################################## [ 24s] glibc-x86-arm ################################################## [ 24s] libattr-x86-arm ################################################## [ 24s] libacl-x86-arm ################################################## [ 24s] libgcc-x86-arm ################################################## [ 24s] pkgmgr ################################################## [ 24s] libstdc++-x86-arm ################################################## [ 24s] glibc-headers ################################################## [ 24s] glibc-devel ################################################## [ 25s] libstdc++-devel ################################################## [ 25s] tizen-security-policy ################################################## [ 25s] coreutils-x86-arm ################################################## [ 27s] bash-x86-arm ################################################## [ 27s] findutils-x86-arm ################################################## [ 27s] build-compare ################################################## [ 28s] qemu-linux-user-x86-arm ################################################## [ 28s] libglib ################################################## [ 28s] pkg-config ################################################## [ 28s] zlib ################################################## [ 28s] sqlite ################################################## [ 28s] openssl ################################################## [ 28s] libxml2 ################################################## [ 28s] smack ################################################## [ 28s] capi-base-common ################################################## [ 28s] xz-libs ################################################## [ 28s] vasum ################################################## [ 28s] liblua ################################################## [ 28s] zlib-x86-arm ################################################## [ 28s] smack-utils ################################################## [ 28s] libdlog ################################################## [ 28s] bundle ################################################## [ 28s] libslp-db-util ################################################## [ 28s] libcap ################################################## [ 28s] bzip2-libs ################################################## [ 28s] elfutils-libelf ################################################## [ 28s] expat ################################################## [ 28s] ncurses-libs ################################################## [ 28s] ncurses ################################################## [ 28s] ncurses-base ################################################## [ 28s] bzip2-libs-x86-arm ################################################## [ 28s] libxslt ################################################## [ 28s] libpython ################################################## [ 28s] python-base ################################################## [ 28s] libpng ################################################## [ 28s] freetype ################################################## [ 28s] binutils ################################################## [ 28s] libicu ################################################## [ 28s] iniparser ################################################## [ 28s] capi-system-info ################################################## [ 28s] sed ################################################## [ 28s] elfutils-libelf-x86-arm ################################################## [ 28s] xz-libs-x86-arm ################################################## [ 28s] zlib-devel ################################################## [ 28s] harfbuzz ################################################## [ 28s] fontconfig ################################################## [ 31s] eventsystem ################################################## [ 31s] ttrace ################################################## [ 31s] libfile ################################################## [ 31s] libgmodule ################################################## [ 31s] libgthread ################################################## [ 31s] fribidi ################################################## [ 31s] libffi ################################################## [ 31s] libgobject ################################################## [ 31s] gio-branding-upstream ################################################## [ 31s] libgio ################################################## [ 31s] libwayland-client ################################################## [ 31s] libuuid ################################################## [ 31s] libblkid ################################################## [ 31s] libmount ################################################## [ 31s] nspr ################################################## [ 31s] popt ################################################## [ 31s] xdgmime ################################################## [ 31s] popt-x86-arm ################################################## [ 31s] nspr-x86-arm ################################################## [ 31s] libfile-x86-arm ################################################## [ 31s] libpng-devel ################################################## [ 31s] freetype-devel ################################################## [ 31s] libicu-devel ################################################## [ 31s] libcap-x86-arm ################################################## [ 31s] liblua-devel ################################################## [ 31s] liblua-x86-arm ################################################## [ 31s] openssl-devel ################################################## [ 31s] file ################################################## [ 31s] python-xml ################################################## [ 31s] xmlsec1-openssl ################################################## [ 31s] xmlsec1 ################################################## [ 31s] elfutils-libs ################################################## [ 31s] elfutils ################################################## [ 31s] bzip2 ################################################## [ 31s] libarchive ################################################## [ 31s] xz ################################################## [ 31s] tar ################################################## [ 31s] diffutils ################################################## [ 31s] libdrm2 ################################################## [ 31s] libjpeg-turbo ################################################## [ 31s] libjson ################################################## [ 31s] libogg ################################################## [ 31s] m4 ################################################## [ 31s] nss-softokn-freebl ################################################## [ 31s] nss ################################################## [ 31s] nss-sysinit ################################################## [ 31s] nss-x86-arm ################################################## [ 31s] rpm-libs ################################################## [ 31s] rpm-libs-x86-arm ################################################## [ 31s] patch ################################################## [ 31s] gawk ################################################## [ 31s] gzip ################################################## [ 31s] pam ################################################## [ 31s] libarchive-x86-arm ################################################## [ 31s] elfutils-libs-x86-arm ################################################## [ 31s] harfbuzz-devel ################################################## [ 31s] fontconfig-devel ################################################## [ 31s] fribidi-devel ################################################## [ 31s] libpython-x86-arm ################################################## [ 31s] ca-certificates ################################################## [ 31s] smack-privilege-config ################################################## [ 31s] /var/tmp/rpm-tmp.4zYrYQ: line 2: which: command not found [ 31s] api_feature_loader not present [ 31s] svi-data ################################################## [ 31s] capi-base-common-devel ################################################## [ 31s] libdlog-devel ################################################## [ 31s] libxml2-x86-arm ################################################## [ 32s] openssl-x86-arm ################################################## [ 32s] libleveldb ################################################## [ 32s] systemd-libs ################################################## [ 32s] eina ################################################## [ 32s] eo ################################################## [ 32s] efl ################################################## [ 32s] eet ################################################## [ 32s] embryo ################################################## [ 32s] ector ################################################## [ 32s] libkey-manager-common ################################################## [ 32s] libcom-core ################################################## [ 32s] libvorbis ################################################## [ 32s] libsndfile ################################################## [ 32s] xz-lzma-compat ################################################## [ 32s] cmake ################################################## [ 32s] libwayland-cursor ################################################## [ 32s] glib2-tools ################################################## [ 32s] libwayland-server ################################################## [ 32s] wayland-devel ################################################## [ 32s] python-lxml ################################################## [ 32s] psmisc ################################################## [ 32s] librua ################################################## [ 32s] libtremolo ################################################## [ 32s] app-checker ################################################## [ 32s] app-checker-server ################################################## [ 32s] kmod-libs ################################################## [ 32s] cpp ################################################## [ 32s] minizip ################################################## [ 32s] libasan ################################################## [ 32s] libtiff ################################################## [ 32s] libubsan ################################################## [ 32s] libatomic ################################################## [ 32s] libgomp ################################################## [ 32s] coregl ################################################## [ 32s] cpio ################################################## [ 32s] db4 ################################################## [ 32s] fdupes ################################################## [ 32s] gdbm ################################################## [ 32s] perl-Pod-Escapes ################################################## [ 32s] perl-Compress-Raw-Zlib ################################################## [ 32s] perl-IO-Compress-Base ################################################## [ 32s] perl-Module-Pluggable ################################################## [ 32s] perl-Pod-Simple ################################################## [ 32s] perl-IO-Compress-Zlib ################################################## [ 32s] perl-libs ################################################## [ 33s] perl ################################################## [ 33s] perl-URI ################################################## [ 33s] autoconf ################################################## [ 34s] automake ################################################## [ 34s] perl-HTML-Tagset ################################################## [ 34s] perl-TimeDate ################################################## [ 34s] perl-Compress-Zlib ################################################## [ 34s] perl-libs-x86-arm ################################################## [ 34s] perl-x86-arm ################################################## [ 34s] perl-HTML-Parser ################################################## [ 35s] perl-libwww-perl ################################################## [ 35s] perl-XML-Parser ################################################## [ 35s] glib2-devel ################################################## [ 35s] libXau ################################################## [ 35s] libxcb ################################################## [ 35s] libX11 ################################################## [ 35s] libXext ################################################## [ 35s] dbus-libs ################################################## [ 35s] dbus ################################################## [ 35s] systemd ################################################## [ 35s] vconf ################################################## [ 35s] Failed to get D-Bus connection: Unknown error -1 [ 35s] pkgmgr-info-parser ################################################## [ 35s] pkgmgr-info ################################################## [ 35s] mkdir: cannot create directory `/usr/etc/package-manager': File exists [ 35s] libXrender ################################################## [ 35s] libXrandr ################################################## [ 35s] dbus-glib ################################################## [ 35s] libXdamage ################################################## [ 35s] libXfixes ################################################## [ 35s] systemd-devel ################################################## [ 35s] eina-devel ################################################## [ 35s] eo-devel ################################################## [ 35s] eet-devel ################################################## [ 35s] efl-devel ################################################## [ 35s] dbus-devel ################################################## [ 35s] libXcursor ################################################## [ 35s] audio-session-manager ################################################## [ 35s] libmm-session ################################################## [ 35s] sensord ################################################## [ 35s] libsensord ################################################## [ 35s] libXgesture ################################################## [ 35s] libXi ################################################## [ 35s] libXinerama ################################################## [ 35s] libXtst ################################################## [ 35s] libdri2 ################################################## [ 35s] libXcomposite ################################################## [ 35s] ector-devel ################################################## [ 35s] embryo-devel ################################################## [ 35s] libtbm ################################################## [ 35s] pkgmgr-installer ################################################## [ 35s] capi-system-device ################################################## [ 35s] bluez ################################################## [ 35s] libXv ################################################## [ 35s] libslp-utilx ################################################## [ 35s] giflib ################################################## [ 35s] eldbus ################################################## [ 35s] ecore ################################################## [ 35s] evas ################################################## [ 36s] evas-devel ################################################## [ 36s] edje ################################################## [ 36s] ecore-devel ################################################## [ 36s] edbus ################################################## [ 36s] eio ################################################## [ 36s] eldbus-devel ################################################## [ 36s] efreet ################################################## [ 36s] eio-devel ################################################## [ 36s] eeze ################################################## [ 36s] efreet-devel ################################################## [ 36s] emotion ################################################## [ 36s] ethumb ################################################## [ 36s] elementary ################################################## [ 36s] efl-extension ################################################## [ 36s] /sbin/ldconfig: relative path `1' used to build cache [ 36s] warning: %post(efl-extension-0.2.19-1.1.armv7l) scriptlet failed, exit status 1 [ 36s] edje-tools ################################################## [ 36s] edje-devel ################################################## [ 36s] ethumb-devel ################################################## [ 36s] resourced ################################################## [ 36s] libresourced ################################################## [ 36s] edbus-devel ################################################## [ 36s] libasound-1.0.25 ################################################## [ 36s] libitm ################################################## [ 36s] gcc ################################################## [ 36s] gcc-c++ ################################################## [ 37s] cross-armv7l-gcc-accel-x86-a################################################## [ 37s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 37s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 38s] libtool-ltdl ################################################## [ 38s] libunwind ################################################## [ 38s] sys-assert ################################################## [ 38s] readline ################################################## [ 38s] python ################################################## [ 38s] ruby ################################################## [ 38s] speex ################################################## [ 38s] appfw-env ################################################## [ 38s] libscl-common ################################################## [ 38s] libscl-common-devel ################################################## [ 38s] unzip ################################################## [ 38s] rpm-build ################################################## [ 38s] libiri ################################################## [ 38s] security-server ################################################## [ 38s] Failed to get D-Bus connection: Unknown error -1 [ 38s] Failed to get D-Bus connection: Unknown error -1 [ 38s] Applying sql update files on db [ 38s] /opt/dbspace/.rules-db.db3 [ 38s] Creating database from scratch [ 43s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 43s] Done. [ 43s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 43s] Done. [ 43s] libsecurity-server-client ################################################## [ 43s] libprivilege-control ################################################## [ 43s] pkgmgr-client ################################################## [ 43s] libkey-manager-client ################################################## [ 43s] key-manager ################################################## [ 43s] Failed to get D-Bus connection: Unknown error -1 [ 43s] Failed to get D-Bus connection: Unknown error -1 [ 43s] ss-server ################################################## [ 44s] Failed to get D-Bus connection: Unknown error -1 [ 44s] Failed to get D-Bus connection: Unknown error -1 [ 44s] warning: %post(ss-server-0.12.13-1.1.armv7l) scriptlet failed, exit status 1 [ 44s] libss-client ################################################## [ 44s] cert-svc ################################################## [ 44s] Failed to get D-Bus connection: Unknown error -1 [ 44s] Failed to get D-Bus connection: Unknown error -1 [ 44s] create .cert_svc_vcore.db [ 44s] add ssl table to certs-meta.db [ 44s] persist [ 96s] aul ################################################## [ 96s] persist [ 96s] app-svc ################################################## [ 96s] app-core-common ################################################## [ 96s] app-core-efl ################################################## [ 96s] syspopup-caller ################################################## [ 96s] syspopup ################################################## [ 96s] bluetooth-frwk ################################################## [ 96s] capi-network-bluetooth ################################################## [ 96s] alarm-server ################################################## [ 96s] chown: cannot access `/opt/dbspace/.alarmmgr.db': No such file or directory [ 96s] chown: cannot access `/opt/dbspace/.alarmmgr.db-journal': No such file or directory [ 96s] libalarm ################################################## [ 96s] capi-appfw-app-manager ################################################## [ 96s] privacy-manager-server ################################################## [ 96s] Check privacy DB [ 96s] Create privacy DB [ 96s] persist [ 96s] privacy-manager-client ################################################## [ 96s] security-privilege-checker ################################################## [ 96s] capi-appfw-application ################################################## [ 96s] capi-appfw-package-manager ################################################## [ 96s] notification ################################################## [ 96s] persist [ 96s] pulseaudio-libs ################################################## [ 96s] pulseaudio ################################################## [ 96s] Failed to get D-Bus connection: Unknown error -1 [ 96s] Failed to get D-Bus connection: Unknown error -1 [ 96s] warning: %post(pulseaudio-4.0.208-1.2.armv7l) scriptlet failed, exit status 1 [ 96s] libmm-sound ################################################## [ 96s] capi-media-audio-io ################################################## [ 96s] Loading rules from directory '/usr/share/privilege-control' for tizen version (null). [ 96s] Done. [ 96s] capi-media-sound-manager ################################################## [ 97s] Loading rules from directory '/usr/share/privilege-control' for tizen version (null). [ 97s] Done. [ 97s] tts ################################################## [ 97s] libfeedback ################################################## [ 97s] org.tizen.isf-kbd-mode-chang################################################## [ 97s] isf ################################################## [ 97s] libscl-core ################################################## [ 97s] make ################################################## [ 97s] make-x86-arm ################################################## [ 97s] libscl-core-devel ################################################## [ 97s] isf-devel ################################################## [ 97s] rpm-build-x86-arm ################################################## [ 97s] ruby-x86-arm ################################################## [ 97s] python-x86-arm ################################################## [ 98s] cross-armv7l-binutils-accel-################################################## [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 98s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 98s] elementary-devel ################################################## [ 98s] perl-XML-Parser-x86-arm ################################################## [ 98s] perl-HTML-Parser-x86-arm ################################################## [ 98s] build ################################################## [ 98s] libtool ################################################## [ 98s] fdupes-x86-arm ################################################## [ 98s] python-lxml-x86-arm ################################################## [ 99s] cmake-x86-arm ################################################## [ 99s] python-base-x86-arm ################################################## [ 100s] elfutils-x86-arm ################################################## [ 100s] gzip-x86-arm ################################################## [ 100s] gawk-x86-arm ################################################## [ 100s] patch-x86-arm ################################################## [ 100s] rpm-x86-arm ################################################## [ 100s] /bin/rpm.orig-arm already present - skipping. [ 100s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 100s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 100s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 100s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 100s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 100s] nss-softokn-freebl-x86-arm ################################################## [ 100s] m4-x86-arm ################################################## [ 100s] diffutils-x86-arm ################################################## [ 100s] tar-x86-arm ################################################## [ 100s] bzip2-x86-arm ################################################## [ 100s] python-xml-x86-arm ################################################## [ 100s] file-x86-arm ################################################## [ 100s] sed-x86-arm ################################################## [ 100s] libxslt-x86-arm ################################################## [ 100s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 100s] ncurses-libs-x86-arm ################################################## [ 100s] expat-x86-arm ################################################## [ 100s] smack-devel ################################################## [ 100s] sqlite-x86-arm ################################################## [ 100s] pkg-config-x86-arm ################################################## [ 100s] util-linux ################################################## [ 100s] pcre ################################################## [ 100s] patchelf ################################################## [ 100s] e2fsprogs-libs ################################################## [ 101s] net-tools ################################################## [ 102s] removing nis flags from //etc/nsswitch.conf... [ 102s] now finalizing build dir... [ 102s] build target is armv7l-tizen-linux [ 102s] ----------------------------------------------------------------- [ 102s] I have the following modifications for capi-ui-inputmethod.spec: [ 102s] 5c5 [ 102s] < Release: 1 [ 102s] --- [ 102s] > Release: %{?release_prefix:%{release_prefix}.}2.1 [ 102s] ----------------------------------------------------------------- [ 102s] ----- building capi-ui-inputmethod.spec (user abuild) [ 102s] ----------------------------------------------------------------- [ 102s] ----------------------------------------------------------------- [ 103s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/ca46bdc2a56c618bfb2afab768ec6e57-capi-ui-inputmethod' /home/abuild/rpmbuild/SOURCES/capi-ui-inputmethod.spec [ 103s] Building target platforms: armv7l-tizen-linux [ 103s] Building for target armv7l-tizen-linux [ 103s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.HvohHU [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + rm -rf capi-ui-inputmethod-0.0.5 [ 103s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-ui-inputmethod-0.0.5.tar.gz [ 103s] + /bin/tar -xf - [ 103s] + STATUS=0 [ 103s] + '[' 0 -ne 0 ']' [ 103s] + cd capi-ui-inputmethod-0.0.5 [ 103s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 103s] + exit 0 [ 103s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.dLMM8U [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd capi-ui-inputmethod-0.0.5 [ 103s] + LANG=C [ 103s] + export LANG [ 103s] + unset DISPLAY [ 103s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 103s] + export CFLAGS [ 103s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 103s] + export CXXFLAGS [ 103s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 103s] + export FFLAGS [ 103s] + LD_AS_NEEDED=1 [ 103s] + export LD_AS_NEEDED [ 103s] + export 'CFLAGS+= -DTIZEN_DEBUG_ENABLE -fPIC -fvisibility=hidden' [ 103s] + CFLAGS+=' -DTIZEN_DEBUG_ENABLE -fPIC -fvisibility=hidden' [ 103s] + export 'CXXFLAGS+= -DTIZEN_DEBUG_ENABLE -fPIC -fvisibility=hidden' [ 103s] + CXXFLAGS+=' -DTIZEN_DEBUG_ENABLE -fPIC -fvisibility=hidden' [ 103s] + export 'FFLAGS+= -DTIZEN_DEBUG_ENABLE -fPIC -fvisibility=hidden' [ 103s] + FFLAGS+=' -DTIZEN_DEBUG_ENABLE -fPIC -fvisibility=hidden' [ 103s] + rm -rf CMakeFiles [ 103s] + rm -rf CMakeCache.txt [ 103s] ++ echo 0.0.5 [ 103s] ++ awk 'BEGIN {FS="."}{print $1}' [ 103s] + MAJORVER=0 [ 103s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.0.5 -DMAJORVER=0 -DLIB_INSTALL_DIR:PATH=/usr/lib [ 103s] -- The CXX compiler identification is GNU [ 103s] -- Check for working CXX compiler: /usr/bin/c++ [ 103s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 103s] -- Detecting CXX compiler ABI info [ 103s] -- Detecting CXX compiler ABI info - done [ 103s] -- checking for module 'capi-base-common dlog elementary ecore-imf libscl-core isf libsmack' [ 103s] -- found capi-base-common dlog elementary ecore-imf libscl-core isf libsmack, version 0.2.2;1.0;1.13.0;1.13.0;1.0;2.4.9516;1.0 [ 104s] -- Configuring done [ 104s] -- Generating done [ 104s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-ui-inputmethod-0.0.5 [ 104s] + make -j4 [ 104s] Scanning dependencies of target capi-ui-inputmethod [ 104s] [100%] Building CXX object CMakeFiles/capi-ui-inputmethod.dir/src/inputmethod.cpp.o [ 104s] In file included from /usr/include/eina-1/Eina.h:226:0, [ 104s] from /usr/include/evas-1/Evas.h:251, [ 104s] from /usr/include/libscl-common/sclcast-efl.h:23, [ 104s] from /usr/include/libscl-common/sclcast.h:21, [ 104s] from /usr/include/libscl-common/sclcommon.h:22, [ 104s] from /usr/include/libscl-core/sclcore.h:27, [ 104s] from /home/abuild/rpmbuild/BUILD/capi-ui-inputmethod-0.0.5/src/inputmethod.cpp:21: [ 104s] /home/abuild/rpmbuild/BUILD/capi-ui-inputmethod-0.0.5/src/inputmethod.cpp: In function 'int ime_update_preedit_string(const char*, Eina_List*)': [ 104s] /usr/include/eina-1/eina/eina_list.h:1791:38: warning: invalid conversion from 'void*' to 'ime_preedit_attribute*' [-fpermissive] [ 104s] for (data = eina_list_data_get(list); \ [ 104s] ^ [ 104s] /home/abuild/rpmbuild/BUILD/capi-ui-inputmethod-0.0.5/src/inputmethod.cpp:988:9: note: in expansion of macro 'EINA_LIST_FREE' [ 104s] EINA_LIST_FREE(attrs, attr) { [ 104s] ^ [ 104s] /usr/include/eina-1/eina/eina_list.h:1794:38: warning: invalid conversion from 'void*' to 'ime_preedit_attribute*' [-fpermissive] [ 104s] data = eina_list_data_get(list)) [ 104s] ^ [ 104s] /home/abuild/rpmbuild/BUILD/capi-ui-inputmethod-0.0.5/src/inputmethod.cpp:988:9: note: in expansion of macro 'EINA_LIST_FREE' [ 104s] EINA_LIST_FREE(attrs, attr) { [ 104s] ^ [ 105s] Linking CXX shared library libcapi-ui-inputmethod.so [ 105s] [100%] Built target capi-ui-inputmethod [ 105s] + exit 0 [ 105s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.kgQey0 [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd capi-ui-inputmethod-0.0.5 [ 105s] + LANG=C [ 105s] + export LANG [ 105s] + unset DISPLAY [ 105s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm [ 105s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm [ 105s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm [ 105s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm install [ 105s] [100%] Built target capi-ui-inputmethod [ 105s] Install the project... [ 105s] -- Install configuration: "" [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/lib/libcapi-ui-inputmethod.so.0.0.5 [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/lib/libcapi-ui-inputmethod.so.0 [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/lib/libcapi-ui-inputmethod.so [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/include [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/include/inputmethod_keydef.h [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/include/inputmethod.h [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/lib/pkgconfig/capi-ui-inputmethod.pc [ 105s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/share/license/capi-ui-inputmethod [ 105s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/share/info/dir [ 105s] + xargs rm -f -- [ 105s] + find /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm -regex '.*\.la$' [ 105s] + find /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm -regex '.*\.a$' [ 105s] + xargs rm -f -- [ 105s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/share/license [ 105s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/share/license/capi-ui-inputmethod [ 105s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-ui-inputmethod-0.0.5 [ 105s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm/usr/lib/libcapi-ui-inputmethod.so.0.0.5 [ 105s] symlinked /usr/lib/debug/usr/lib/libcapi-ui-inputmethod.so.0.0.5.debug to /usr/lib/debug/usr/lib/libcapi-ui-inputmethod.so.debug [ 105s] symlinked /usr/lib/debug/usr/lib/libcapi-ui-inputmethod.so.0.0.5.debug to /usr/lib/debug/usr/lib/libcapi-ui-inputmethod.so.0.debug [ 105s] 267 blocks [ 105s] + /usr/lib/rpm/check-buildroot [ 105s] + /usr/lib/rpm//brp-compress [ 105s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 105s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 105s] + /usr/lib/rpm/brp-python-hardlink [ 105s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm [ 105s] Processing files: capi-ui-inputmethod-0.0.5-2.1.armv7l [ 105s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgPGRvbWFpbiBuYW1lPSJfIi8+CiA8L3Jl [ 105s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 105s] [ 105s] Provides: libcapi-ui-inputmethod.so.0 [ 105s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 105s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 105s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 105s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 105s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libcapi-ui-inputmethod.so.0 libdlog.so.0 libeina.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libscl-core.so libsmack.so.1 libsmack.so.1(LIBSMACK) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH) [ 105s] Processing files: capi-ui-inputmethod-debuginfo-0.0.5-2.1.armv7l [ 105s] Processing files: capi-ui-inputmethod-debugsource-0.0.5-2.1.armv7l [ 105s] Processing files: capi-ui-inputmethod-devel-0.0.5-2.1.armv7l [ 105s] Provides: pkgconfig(capi-ui-inputmethod) = 0.0.1 [ 105s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 105s] Requires: /usr/bin/pkg-config libcapi-ui-inputmethod.so.0 pkgconfig(capi-base-common) pkgconfig(dlog) pkgconfig(ecore-imf) pkgconfig(elementary) pkgconfig(isf) pkgconfig(libscl-core) pkgconfig(libsmack) [ 105s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm [ 105s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-ui-inputmethod-0.0.5-2.1.src.rpm [ 105s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-0.0.5-2.1.armv7l.rpm [ 105s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-debuginfo-0.0.5-2.1.armv7l.rpm [ 105s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-debugsource-0.0.5-2.1.armv7l.rpm [ 105s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-devel-0.0.5-2.1.armv7l.rpm [ 105s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yPvS1F [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd capi-ui-inputmethod-0.0.5 [ 105s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-ui-inputmethod-0.0.5-2.1.arm [ 105s] + exit 0 [ 105s] ... checking for files with abuild user/group [ 105s] ... creating baselibs [ 106s] ... comparing built packages with the former built [ 106s] /usr/lib/build/rpm-check.sh [ 106s] compare /.build.oldpackages/capi-ui-inputmethod-0.0.4-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/capi-ui-inputmethod-0.0.5-2.1.src.rpm [ 106s] --- /tmp/tmp.K0ClxfIIDO 2016-03-07 03:16:31.580712261 +0000 [ 106s] +++ /tmp/tmp.Cf68zqZDbX 2016-03-07 03:16:31.596712261 +0000 [ 106s] @@ -1,7 +1,7 @@ [ 106s] -capi-ui-inputmethod 0.0.4 (none) [ 106s] +capi-ui-inputmethod 0.0.5 (none) [ 106s] Input Method Library [ 106s] Input Method Library [ 106s] - tizen Tizen:2.4:Mobile / target-TM1 obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/10b536b3694f446086cbd5ee39717a2b-capi-ui-inputmethod Apache-2.0 Apache-2.0 [ 106s] + tizen Tizen:2.4:Mobile / target-TM1 obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/ca46bdc2a56c618bfb2afab768ec6e57-capi-ui-inputmethod Apache-2.0 Apache-2.0 [ 106s] Graphics & UI Framework/Input (none) (none) (none) (none) [ 106s] (none) 4.9.1 (none) [ 106s] cpio gzip 9 [ 106s] ... saving built statistics [ 106s] ... saving built packages [ 106s] /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-0.0.5-2.1.armv7l.rpm [ 106s] /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-debuginfo-0.0.5-2.1.armv7l.rpm [ 106s] /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-debugsource-0.0.5-2.1.armv7l.rpm [ 106s] /home/abuild/rpmbuild/RPMS/armv7l/capi-ui-inputmethod-devel-0.0.5-2.1.armv7l.rpm [ 106s] /home/abuild/rpmbuild/SRPMS/capi-ui-inputmethod-0.0.5-2.1.src.rpm [ 106s] /home/abuild/rpmbuild/OTHER/_statistics [ 106s] [ 106s] w14 finished "build capi-ui-inputmethod.spec" at Mon Mar 7 03:16:31 UTC 2016. [ 106s] [ 107s] /.build/build: line 368: 218 Killed background_monitor_process [ 109s] [ 102.856472] SysRq : Power Off [ 109s] [ 103.068383] Power down. [ 109s] build: extracting built packages... [ 109s] capi-ui-inputmethod-0.0.5-2.1.armv7l.rpm [ 109s] capi-ui-inputmethod-debuginfo-0.0.5-2.1.armv7l.rpm [ 109s] capi-ui-inputmethod-debugsource-0.0.5-2.1.armv7l.rpm [ 109s] capi-ui-inputmethod-devel-0.0.5-2.1.armv7l.rpm [ 109s] capi-ui-inputmethod-0.0.5-2.1.src.rpm [ 109s] _statistics