[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w08 started "build _service:gbs:libXext.spec" at Thu Oct 29 05:03:48 UTC 2015. [ 0s] [ 0s] Building libXext for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 '44fa611dbc2b8aa5049113b259480728' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:libXext.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:libXext.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:libXext.spec build rpmlint-Factory ... [ 1s] registering binfmt handlers for VM [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 1s] [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: glibc -> glibc-common -> bash [ 1s] breaking dependency glibc-common -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: glibc -> glibc-common -> coreutils [ 1s] breaking dependency coreutils -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> glibc [ 1s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libattr -> glibc [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency libacl -> libattr [ 1s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 1s] breaking dependency glibc-common -> coreutils [ 1s] cycle: glibc -> glibc-common [ 1s] breaking dependency glibc -> glibc-common [ 1s] cycle: libgcc -> glibc [ 1s] breaking dependency libgcc -> glibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/52] preinstalling tizen-release... [ 1s] [2/52] preinstalling libgcc... [ 1s] [3/52] preinstalling setup... [ 1s] [4/52] preinstalling filesystem... [ 1s] [5/52] preinstalling glibc... [ 1s] [6/52] preinstalling libattr... [ 1s] [7/52] preinstalling libacl... [ 1s] [8/52] preinstalling bash... [ 1s] [9/52] preinstalling bzip2-libs... [ 1s] [10/52] preinstalling diffutils... [ 1s] [11/52] preinstalling elfutils-libelf... [ 1s] [12/52] preinstalling libcap... [ 1s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 2s] [28/52] preinstalling tizen-accelerator... [ 2s] [29/52] preinstalling libfile... [ 2s] [30/52] preinstalling bzip2... [ 2s] [31/52] preinstalling nss... [ 2s] [32/52] preinstalling bzip2-libs-x86-arm... [ 2s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 2s] [34/52] preinstalling glibc-x86-arm... [ 2s] [35/52] preinstalling libacl-x86-arm... [ 2s] [36/52] preinstalling libattr-x86-arm... [ 2s] [37/52] preinstalling libcap-x86-arm... [ 2s] [38/52] preinstalling libgcc-x86-arm... [ 2s] [39/52] preinstalling liblua-x86-arm... [ 2s] [40/52] preinstalling ncurses-libs-x86-arm... [ 2s] [41/52] preinstalling nspr-x86-arm... [ 2s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [43/52] preinstalling nss-x86-arm... [ 2s] [44/52] preinstalling popt-x86-arm... [ 2s] [45/52] preinstalling sqlite-x86-arm... [ 2s] [46/52] preinstalling xz-libs-x86-arm... [ 2s] [47/52] preinstalling zlib-x86-arm... [ 2s] [48/52] preinstalling rpm-libs... [ 2s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> glibc -> glibc-common [ 3s] breaking dependency glibc-common -> bash [ 3s] cycle: bash -> glibc -> glibc-common -> coreutils [ 3s] breaking dependency glibc-common -> coreutils [ 3s] cycle: glibc -> glibc-common -> findutils [ 3s] breaking dependency glibc-common -> findutils [ 3s] cycle: glibc -> glibc-common [ 3s] breaking dependency glibc-common -> glibc [ 3s] cycle: glibc -> glibc-common -> grep [ 3s] breaking dependency grep -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency glibc -> glibc-common [ 3s] cycle: glibc -> libgcc [ 3s] breaking dependency libgcc -> glibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 5s] booting kvm ... [ 5s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 16000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 8 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 4705/4194304 files, 337313/16777216 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 11s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 11s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] swapon on /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 12s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 12s] logging output to //.build.log... [ 12s] processing specfile /.build-srcdir/_service:gbs:libXext.spec ... [ 15s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libXext.spec build rpmlint-Factory ... [ 28s] running rpm-x86-arm postinstall script [ 29s] running rpm-libs-x86-arm postinstall script [ 29s] running tizen-accelerator postinstall script [ 29s] running glibc-x86-arm postinstall script [ 30s] running bash-x86-arm postinstall script [ 30s] initializing rpm db... [ 36s] [1/181] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 37s] [2/181] cumulate kernel-headers-3.4.91-1.1 [ 37s] [3/181] cumulate libX11-common-1.6.2-1.1 [ 37s] [4/181] cumulate tizen-release-2.2.0-1.1 [ 37s] [5/181] cumulate tzdata-2014j-1.1 [ 37s] [6/181] cumulate libgcc-4.9.2-2015.02.1.11 [ 37s] [7/181] cumulate setup-0.2-1.1 [ 37s] [8/181] cumulate filesystem-0.1-1.1 [ 37s] [9/181] cumulate glibc-2.20-2014.11.1.10 [ 37s] [10/181] cumulate libstdc++-4.9.2-2015.02.1.11 [ 37s] [11/181] cumulate libatomic-4.9.2-2015.02.1.11 [ 37s] [12/181] cumulate libgomp-4.9.2-2015.02.1.11 [ 37s] [13/181] cumulate openssl-1.0.1p-1.5 [ 38s] [14/181] cumulate bash-4.1-1.6 [ 38s] [15/181] cumulate bzip2-libs-1.0.5-1.8 [ 38s] [16/181] cumulate cpio-2.8-1.6 [ 38s] [17/181] cumulate db4-4.8.30-1.8 [ 38s] [18/181] cumulate diffutils-3.0-1.6 [ 38s] [19/181] cumulate e2fsprogs-libs-1.41.9-1.4 [ 39s] [20/181] cumulate elfutils-libelf-0.152-1.12 [ 39s] [21/181] cumulate expat-2.0.1-1.8 [ 39s] [22/181] cumulate fdupes-1.40-1.5 [ 39s] [23/181] cumulate findutils-4.2.31-1.5 [ 40s] [24/181] cumulate gdbm-1.8.3-1.12 [ 40s] [25/181] cumulate libXau-1.0.8-1.1 [ 40s] [26/181] cumulate libattr-2.4.44-1.8 [ 40s] [27/181] cumulate libitm-4.9.2-2015.02.1.11 [ 40s] [28/181] cumulate liblua-5.1.4-1.6 [ 40s] [29/181] cumulate libuuid-2.20.2-1.4 [ 40s] [30/181] cumulate m4-1.4.14-1.5 [ 40s] [31/181] cumulate net-tools-1.60-2.6 [ 40s] [32/181] cumulate nspr-4.9-1.9 [ 41s] [33/181] cumulate nss-softokn-freebl-3.12.9-1.17 [ 41s] [34/181] cumulate patch-2.6-1.6 [ 41s] [35/181] cumulate pkg-config-0.25-2.6 [ 41s] [36/181] cumulate popt-1.16-1.8 [ 41s] [37/181] cumulate readline-5.2-1.6 [ 41s] [38/181] cumulate ruby-1.9.2-1.6 [ 41s] [39/181] cumulate sed-4.1.5-1.5 [ 42s] [40/181] cumulate sqlite-3.8.10.2-1.8 [ 42s] [41/181] cumulate xz-libs-5.0.3-1.8 [ 42s] [42/181] cumulate zlib-1.2.8-1.8 [ 42s] [43/181] cumulate libasan-4.9.2-2015.02.1.11 [ 42s] [44/181] cumulate libpcre-7.7-1.25 [ 42s] [45/181] cumulate libubsan-4.9.2-2015.02.1.11 [ 43s] [46/181] cumulate patchelf-0.5.svn20809-1.5 [ 43s] [47/181] cumulate ncurses-libs-5.7-1.8 [ 43s] [48/181] cumulate build-compare-2009.10.14-1.6 [ 43s] [49/181] cumulate libpthread-stubs-0.3-1.1 [ 43s] [50/181] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 43s] [51/181] cumulate xorg-x11-proto-core-7.0.31-1.1 [ 43s] [52/181] cumulate xorg-x11-proto-kb-1.0.6-1.1 [ 43s] [53/181] cumulate xorg-x11-proto-xext-7.3.1-1.1 [ 43s] [54/181] cumulate xorg-x11-xutils-dev-7.7-1.1 [ 43s] [55/181] cumulate cpp-4.9.2-2015.02.1.11 [ 44s] [56/181] cumulate glibc-headers-2.20-2014.11.1.10 [ 44s] [57/181] cumulate libcap-2.21-1.6 [ 44s] [58/181] cumulate unzip-6.0-1.12 [ 45s] [59/181] cumulate grep-2.5.1a-1.5 [ 46s] [60/181] cumulate libacl-2.2.49-1.5 [ 47s] [61/181] cumulate libfile-5.04-1.7 [ 47s] [62/181] cumulate libpython-2.7.1-1.5 [ 47s] [63/181] cumulate libxcb-1.10.0-1.1 [ 47s] [64/181] cumulate libxml2-2.9.2-1.3 [ 48s] [65/181] cumulate make-3.82-154.1.6 [ 48s] [66/181] cumulate ncurses-5.7-1.8 [ 48s] [67/181] cumulate pcre-7.7-1.25 [ 49s] [68/181] cumulate psmisc-22.20-1.6 [ 49s] [69/181] cumulate binutils-2.25.0-2015.01.1.8 [ 49s] [70/181] cumulate bzip2-1.0.5-1.8 [ 49s] [71/181] cumulate libblkid-2.20.2-1.4 [ 50s] [72/181] cumulate xz-5.0.3-1.8 [ 50s] [73/181] cumulate elfutils-libs-0.152-1.12 [ 51s] [74/181] cumulate nss-3.12.9-1.17 [ 51s] [75/181] cumulate perl-5.12.1-1.25 [ 52s] [76/181] cumulate ncurses-base-5.7-1.8 [ 52s] [77/181] cumulate perl-HTML-Tagset-3.20-1.1 [ 52s] [78/181] cumulate perl-IO-Compress-Base-2.008-1.25 [ 52s] [79/181] cumulate perl-Module-Pluggable-3.60-1.25 [ 52s] [80/181] cumulate perl-Pod-Escapes-1.04-1.25 [ 53s] [81/181] cumulate perl-TimeDate-1.20-1.1 [ 53s] [82/181] cumulate perl-URI-1.54-1.1 [ 53s] [83/181] cumulate glibc-devel-2.20-2014.11.1.10 [ 53s] [84/181] cumulate file-5.04-1.7 [ 53s] [85/181] cumulate libXau-devel-1.0.8-1.1 [ 53s] [86/181] cumulate libxslt-1.1.28-1.2 [ 53s] [87/181] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 53s] [88/181] cumulate perl-libs-5.12.1-1.25 [ 53s] [89/181] cumulate tar-1.17-1.6 [ 53s] [90/181] cumulate coreutils-6.9-1.6 [ 53s] [91/181] cumulate libX11-1.6.2-1.1 [ 53s] [92/181] cumulate libmount-2.20.2-1.4 [ 53s] [93/181] cumulate xz-lzma-compat-5.0.3-1.8 [ 54s] [94/181] cumulate elfutils-0.152-1.12 [ 54s] [95/181] cumulate nss-sysinit-3.12.9-1.17 [ 54s] [96/181] cumulate python-base-2.7.1-1.5 [ 54s] [97/181] cumulate glibc-common-2.20-2014.11.1.10 [ 54s] [98/181] cumulate libarchive-2.8.3-1.2 [ 54s] [99/181] cumulate rpm-libs-4.9.1-4.3.1.10 [ 55s] [100/181] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 55s] [101/181] cumulate perl-Pod-Simple-3.07-1.25 [ 55s] [102/181] cumulate tizen-accelerator-1.0.1-1.1 [ 55s] [103/181] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 55s] [104/181] cumulate gawk-3.1.5-1.6 [ 55s] [105/181] cumulate gzip-1.3.12-1.6 [ 55s] [106/181] cumulate libxcb-devel-1.10.0-1.1 [ 55s] [107/181] cumulate perl-HTML-Parser-3.65-1.5 [ 55s] [108/181] cumulate python-xml-2.7.1-1.5 [ 55s] [109/181] cumulate autoconf-2.68-1.1 [ 56s] [110/181] cumulate build-2011.01.10a-1.1 [ 56s] [111/181] installing rpm-4.9.1-4.3.1.10 [ 56s] [112/181] cumulate python-lxml-2.2.3-1.2 [ 56s] [113/181] cumulate util-linux-2.20.2-1.4 [ 56s] [114/181] cumulate cmake-2.8.5-1.1.2 [ 57s] [115/181] cumulate python-2.7.1-1.3 [ 57s] [116/181] cumulate gcc-4.9.2-2015.02.1.11 [ 57s] [117/181] cumulate automake-1.11.1-1.1 [ 57s] [118/181] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 57s] [119/181] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 57s] [120/181] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 57s] [121/181] cumulate expat-x86-arm-2.0.1-1.4 [ 57s] [122/181] cumulate glibc-x86-arm-2.20-9.1.5 [ 57s] [123/181] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 57s] [124/181] cumulate libarchive-x86-arm-2.8.3-1.3 [ 57s] [125/181] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 57s] [126/181] cumulate libcap-x86-arm-2.21-9.1.4 [ 58s] [127/181] cumulate libfile-x86-arm-5.04-9.1.4 [ 58s] [128/181] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 58s] [129/181] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 58s] [130/181] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 58s] [131/181] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 58s] [132/181] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 58s] [133/181] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 58s] [134/181] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 58s] [135/181] cumulate nspr-x86-arm-4.9-9.1.5 [ 58s] [136/181] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 58s] [137/181] cumulate nss-x86-arm-3.12.9-9.1.5 [ 58s] [138/181] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 58s] [139/181] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 58s] [140/181] cumulate popt-x86-arm-1.16-9.1.4 [ 58s] [141/181] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 58s] [142/181] cumulate python-x86-arm-2.7.1-9.1.3 [ 58s] [143/181] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 58s] [144/181] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 58s] [145/181] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 58s] [146/181] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 58s] [147/181] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 58s] [148/181] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 58s] [149/181] cumulate perl-Compress-Zlib-2.008-1.25 [ 58s] [150/181] cumulate libX11-devel-1.6.2-1.1 [ 58s] [151/181] cumulate rpm-build-4.9.1-4.3.1.10 [ 59s] [152/181] cumulate bash-x86-arm-4.1-9.1.4 [ 59s] [153/181] cumulate diffutils-x86-arm-3.0-9.1.4 [ 59s] [154/181] cumulate fdupes-x86-arm-1.40-9.1.4 [ 59s] [155/181] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 59s] [156/181] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 59s] [157/181] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 59s] [158/181] cumulate libtool-2.2.6b-1.8 [ 59s] [159/181] cumulate m4-x86-arm-1.4.14-9.1.4 [ 59s] [160/181] cumulate make-x86-arm-3.82-9.1.3 [ 59s] [161/181] cumulate patch-x86-arm-2.6-9.1.4 [ 59s] [162/181] cumulate perl-libwww-perl-5.836-1.1 [ 59s] [163/181] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 59s] [164/181] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 59s] [165/181] cumulate sed-x86-arm-4.1.5-9.1.4 [ 59s] [166/181] cumulate bzip2-x86-arm-1.0.5-1.4 [ 59s] [167/181] cumulate perl-x86-arm-5.12.1-9.1.5 [ 59s] [168/181] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 59s] [169/181] cumulate coreutils-x86-arm-6.9-9.1.4 [ 60s] [170/181] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 60s] [171/181] cumulate file-x86-arm-5.04-9.1.4 [ 60s] [172/181] cumulate tar-x86-arm-1.17-9.1.4 [ 60s] [173/181] cumulate elfutils-x86-arm-0.152-9.1.4 [ 60s] [174/181] cumulate cmake-x86-arm-2.8.5-1.3 [ 60s] [175/181] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 60s] [176/181] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 60s] [177/181] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 60s] [178/181] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 60s] [179/181] cumulate perl-XML-Parser-2.36-1.6 [ 60s] [180/181] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 60s] [181/181] now installing cumulated packages [ 69s] Preparing... ################################################## [ 70s] setup ################################################## [ 70s] filesystem ################################################## [ 70s] tzdata ################################################## [ 70s] libX11-common ################################################## [ 70s] tizen-release ################################################## [ 70s] kernel-headers ################################################## [ 70s] cross-armv7l-platformfile ################################################## [ 71s] bash ################################################## [ 71s] findutils ################################################## [ 71s] grep ################################################## [ 71s] coreutils ################################################## [ 71s] glibc-common ################################################## [ 72s] libgcc ################################################## [ 72s] /sbin/ldconfig: relative path `1' used to build cache [ 72s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 72s] glibc ################################################## [ 72s] libstdc++ ################################################## [ 72s] libattr ################################################## [ 72s] libacl ################################################## [ 72s] libpcre ################################################## [ 72s] tizen-accelerator ################################################## [ 73s] glibc-x86-arm ################################################## [ 73s] libattr-x86-arm ################################################## [ 73s] libacl-x86-arm ################################################## [ 73s] libgcc-x86-arm ################################################## [ 73s] libstdc++-x86-arm ################################################## [ 74s] glibc-headers ################################################## [ 74s] glibc-devel ################################################## [ 74s] libstdc++-devel ################################################## [ 74s] coreutils-x86-arm ################################################## [ 76s] bash-x86-arm ################################################## [ 76s] findutils-x86-arm ################################################## [ 76s] build-compare ################################################## [ 77s] qemu-linux-user-x86-arm ################################################## [ 77s] zlib ################################################## [ 77s] pkg-config ################################################## [ 77s] zlib-x86-arm ################################################## [ 77s] bzip2-libs ################################################## [ 77s] bzip2-libs-x86-arm ################################################## [ 77s] elfutils-libelf ################################################## [ 77s] xz-libs ################################################## [ 77s] ncurses-libs ################################################## [ 77s] ncurses ################################################## [ 77s] ncurses-base ################################################## [ 77s] libpython ################################################## [ 77s] python-base ################################################## [ 77s] libxml2 ################################################## [ 78s] binutils ################################################## [ 78s] xz-libs-x86-arm ################################################## [ 78s] elfutils-libelf-x86-arm ################################################## [ 78s] libfile ################################################## [ 78s] openssl ################################################## [ 78s] expat ################################################## [ 78s] libuuid ################################################## [ 78s] nspr ################################################## [ 78s] popt ################################################## [ 78s] sed ################################################## [ 78s] sqlite ################################################## [ 78s] popt-x86-arm ################################################## [ 78s] nspr-x86-arm ################################################## [ 78s] libfile-x86-arm ################################################## [ 78s] xorg-x11-proto-core ################################################## [ 78s] libblkid ################################################## [ 78s] libarchive ################################################## [ 78s] file ################################################## [ 78s] libxslt ################################################## [ 78s] xz ################################################## [ 78s] elfutils-libs ################################################## [ 78s] elfutils ################################################## [ 78s] bzip2 ################################################## [ 78s] tar ################################################## [ 78s] libcap ################################################## [ 78s] libcap-x86-arm ################################################## [ 78s] diffutils ################################################## [ 78s] libXau ################################################## [ 78s] libxcb ################################################## [ 78s] liblua ################################################## [ 78s] liblua-x86-arm ################################################## [ 78s] m4 ################################################## [ 78s] nss-softokn-freebl ################################################## [ 79s] nss ################################################## [ 79s] nss-sysinit ################################################## [ 79s] nss-x86-arm ################################################## [ 79s] rpm-libs ################################################## [ 79s] rpm-libs-x86-arm ################################################## [ 79s] patch ################################################## [ 79s] gawk ################################################## [ 79s] gzip ################################################## [ 79s] libXau-devel ################################################## [ 79s] elfutils-libs-x86-arm ################################################## [ 79s] libarchive-x86-arm ################################################## [ 79s] openssl-x86-arm ################################################## [ 79s] libxml2-x86-arm ################################################## [ 79s] libpython-x86-arm ################################################## [ 79s] libpthread-stubs ################################################## [ 79s] libxcb-devel ################################################## [ 79s] xorg-x11-proto-kb ################################################## [ 79s] libX11 ################################################## [ 79s] xz-lzma-compat ################################################## [ 80s] python-lxml ################################################## [ 80s] cmake ################################################## [ 80s] libmount ################################################## [ 80s] python-xml ################################################## [ 80s] cpp ################################################## [ 80s] libasan ################################################## [ 80s] libubsan ################################################## [ 80s] libatomic ################################################## [ 80s] libgomp ################################################## [ 80s] cpio ################################################## [ 80s] db4 ################################################## [ 80s] fdupes ################################################## [ 80s] gdbm ################################################## [ 80s] perl-Pod-Escapes ################################################## [ 80s] perl-Compress-Raw-Zlib ################################################## [ 81s] perl-IO-Compress-Base ################################################## [ 81s] perl-Module-Pluggable ################################################## [ 81s] perl-Pod-Simple ################################################## [ 81s] perl-IO-Compress-Zlib ################################################## [ 81s] perl-libs ################################################## [ 83s] perl ################################################## [ 83s] perl-URI ################################################## [ 83s] autoconf ################################################## [ 83s] automake ################################################## [ 83s] perl-HTML-Tagset ################################################## [ 83s] perl-TimeDate ################################################## [ 83s] perl-Compress-Zlib ################################################## [ 83s] perl-libs-x86-arm ################################################## [ 84s] perl-x86-arm ################################################## [ 84s] perl-HTML-Parser ################################################## [ 84s] perl-libwww-perl ################################################## [ 84s] perl-XML-Parser ################################################## [ 84s] libitm ################################################## [ 85s] gcc ################################################## [ 85s] gcc-c++ ################################################## [ 96s] cross-armv7l-gcc-accel-x86-a################################################## [ 96s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 96s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 98s] readline ################################################## [ 99s] python ################################################## [ 103s] ruby ################################################## [ 104s] unzip ################################################## [ 105s] rpm-build ################################################## [ 106s] make ################################################## [ 107s] make-x86-arm ################################################## [ 108s] rpm-build-x86-arm ################################################## [ 109s] ruby-x86-arm ################################################## [ 109s] python-x86-arm ################################################## [ 110s] cross-armv7l-binutils-accel-################################################## [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 110s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 110s] perl-XML-Parser-x86-arm ################################################## [ 110s] perl-HTML-Parser-x86-arm ################################################## [ 110s] build ################################################## [ 111s] libtool ################################################## [ 111s] fdupes-x86-arm ################################################## [ 111s] python-xml-x86-arm ################################################## [ 112s] cmake-x86-arm ################################################## [ 112s] python-lxml-x86-arm ################################################## [ 112s] libX11-devel ################################################## [ 113s] python-base-x86-arm ################################################## [ 114s] elfutils-x86-arm ################################################## [ 114s] gzip-x86-arm ################################################## [ 114s] gawk-x86-arm ################################################## [ 114s] patch-x86-arm ################################################## [ 114s] rpm-x86-arm ################################################## [ 114s] /bin/rpm.orig-arm already present - skipping. [ 114s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 114s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 114s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 114s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 114s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 114s] nss-softokn-freebl-x86-arm ################################################## [ 114s] m4-x86-arm ################################################## [ 114s] diffutils-x86-arm ################################################## [ 114s] tar-x86-arm ################################################## [ 114s] bzip2-x86-arm ################################################## [ 114s] libxslt-x86-arm ################################################## [ 114s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 114s] file-x86-arm ################################################## [ 115s] sqlite-x86-arm ################################################## [ 115s] sed-x86-arm ################################################## [ 115s] expat-x86-arm ################################################## [ 115s] ncurses-libs-x86-arm ################################################## [ 115s] xorg-x11-proto-xext ################################################## [ 115s] xorg-x11-xutils-dev ################################################## [ 115s] pkg-config-x86-arm ################################################## [ 115s] util-linux ################################################## [ 115s] psmisc ################################################## [ 115s] pcre ################################################## [ 115s] patchelf ################################################## [ 115s] e2fsprogs-libs ################################################## [ 115s] net-tools ################################################## [ 116s] removing nis flags from //etc/nsswitch.conf... [ 116s] now finalizing build dir... [ 118s] build target is armv7l-tizen-linux [ 118s] ----------------------------------------------------------------- [ 118s] I have the following modifications for libXext.spec: [ 118s] 5c5 [ 118s] < Release: 1 [ 118s] --- [ 118s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 118s] 90c90,91 [ 118s] < #%{_mandir}/man3/*.3* [ 118s] \ No newline at end of file [ 118s] --- [ 118s] > #%{_mandir}/man3/*.3* [ 118s] > %changelog [ 118s] ----------------------------------------------------------------- [ 118s] ----- building libXext.spec (user abuild) [ 118s] ----------------------------------------------------------------- [ 118s] ----------------------------------------------------------------- [ 118s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/44fa611dbc2b8aa5049113b259480728-libXext' /home/abuild/rpmbuild/SOURCES/libXext.spec [ 118s] Building target platforms: armv7l-tizen-linux [ 118s] Building for target armv7l-tizen-linux [ 118s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.euaeqU [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + rm -rf libXext-1.3.2 [ 118s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libXext-1.3.2.tar.gz [ 118s] + /bin/tar -xf - [ 118s] + STATUS=0 [ 118s] + '[' 0 -ne 0 ']' [ 118s] + cd libXext-1.3.2 [ 118s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 118s] + exit 0 [ 118s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SFTACf [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd libXext-1.3.2 [ 118s] + LANG=C [ 118s] + export LANG [ 118s] + unset DISPLAY [ 118s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 118s] + export CFLAGS [ 118s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 118s] + export CXXFLAGS [ 118s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 118s] + export FFLAGS [ 118s] + LD_AS_NEEDED=1 [ 118s] + export LD_AS_NEEDED [ 118s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 118s] + export CFLAGS [ 118s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 118s] + export CXXFLAGS [ 118s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 118s] + export FFLAGS [ 118s] + autoreconf -v --install --force [ 118s] autoreconf: Entering directory `.' [ 118s] autoreconf: configure.ac: not using Gettext [ 119s] autoreconf: running: aclocal --force [ 121s] autoreconf: configure.ac: tracing [ 121s] autoreconf: running: libtoolize --copy --force [ 122s] libtoolize: putting auxiliary files in `.'. [ 122s] libtoolize: copying file `./ltmain.sh' [ 122s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 122s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 122s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 123s] autoreconf: running: /usr/bin/autoconf --force [ 124s] autoreconf: running: /usr/bin/autoheader --force [ 124s] autoreconf: running: automake --add-missing --copy --force-missing [ 125s] configure.ac:13: installing `./config.guess' [ 125s] configure.ac:13: installing `./config.sub' [ 125s] configure.ac:10: installing `./install-sh' [ 125s] configure.ac:10: installing `./missing' [ 125s] src/Makefile.am: installing `./depcomp' [ 125s] autoreconf: Leaving directory `.' [ 125s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 125s] checking for a BSD-compatible install... /usr/bin/install -c [ 126s] checking whether build environment is sane... yes [ 126s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 126s] checking for gawk... gawk [ 126s] checking whether make sets $(MAKE)... yes [ 126s] checking build system type... armv7l-tizen-linux-gnueabi [ 126s] checking host system type... armv7l-tizen-linux-gnueabi [ 126s] checking for style of include used by make... GNU [ 126s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 128s] checking whether the C compiler works... yes [ 128s] checking for C compiler default output file name... a.out [ 128s] checking for suffix of executables... [ 129s] checking whether we are cross compiling... no [ 129s] checking for suffix of object files... o [ 130s] checking whether we are using the GNU C compiler... yes [ 130s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 130s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 130s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 130s] checking for a sed that does not truncate output... /bin/sed [ 130s] checking for grep that handles long lines and -e... /bin/grep [ 130s] checking for egrep... /bin/grep -E [ 131s] checking for fgrep... /bin/grep -F [ 131s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld [ 131s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) is GNU ld... yes [ 131s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 131s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 131s] checking whether ln -s works... yes [ 131s] checking the maximum length of command line arguments... 1572864 [ 131s] checking whether the shell understands some XSI constructs... yes [ 131s] checking whether the shell understands "+="... yes [ 131s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld option to reload object files... -r [ 131s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 131s] checking for objdump... objdump [ 131s] checking how to recognize dependent libraries... pass_all [ 131s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 131s] checking for ar... ar [ 131s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 131s] checking for strip... strip [ 131s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 131s] checking for ranlib... ranlib [ 135s] checking command to parse /usr/bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 135s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 135s] checking for ANSI C header files... yes [ 135s] checking for sys/types.h... yes [ 135s] checking for sys/stat.h... yes [ 135s] checking for stdlib.h... yes [ 135s] checking for string.h... yes [ 136s] checking for memory.h... yes [ 136s] checking for strings.h... yes [ 136s] checking for inttypes.h... yes [ 136s] checking for stdint.h... yes [ 136s] checking for unistd.h... yes [ 136s] checking for dlfcn.h... yes [ 136s] checking for objdir... .libs [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 136s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 136s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 136s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld) supports shared libraries... yes [ 137s] checking whether -lc should be explicitly linked in... no [ 137s] checking dynamic linker characteristics... GNU/Linux ld.so [ 137s] checking how to hardcode library paths into programs... immediate [ 137s] checking whether stripping libraries is possible... yes [ 137s] checking if libtool supports shared libraries... yes [ 137s] checking whether to build shared libraries... yes [ 137s] checking whether to build static libraries... no [ 137s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C99... -std=gnu99 [ 137s] checking whether __clang__ is declared... no [ 137s] checking whether __INTEL_COMPILER is declared... no [ 137s] checking whether __SUNPRO_C is declared... no [ 137s] checking for armv7l-tizen-linux-gnueabi-pkg-config... no [ 137s] checking for pkg-config... /usr/bin/pkg-config [ 137s] checking pkg-config is at least version 0.9.0... yes [ 137s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 137s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 137s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wall... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wpointer-arith... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wmissing-declarations... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wformat=2... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wnested-externs... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wbad-function-cast... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wold-style-definition... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wunused... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wuninitialized... yes [ 138s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wshadow... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wcast-qual... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Wredundant-decls... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=implicit... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=nonnull... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=init-self... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=main... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=missing-braces... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=sequence-point... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=return-type... yes [ 139s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=trigraphs... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=array-bounds... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=write-strings... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=address... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-pedantic... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror... yes [ 140s] checking if armv7l-tizen-linux-gnueabi-gcc -std=gnu99 supports-Werror=attributes... yes [ 140s] checking whether to build functional specifications... yes [ 140s] checking for xmlto... no [ 140s] configure: WARNING: xmlto not found - documentation targets will be skipped [ 140s] checking for fop... no [ 140s] configure: WARNING: fop not found - documentation targets will be skipped [ 140s] checking for xsltproc... no [ 140s] configure: WARNING: xsltproc not found - cannot transform XML documents [ 140s] checking for X.Org SGML entities >= 1.8... no [ 140s] checking whether malloc(0) returns NULL... yes [ 140s] checking for XEXT... yes [ 140s] checking for _XEatDataWords... yes [ 140s] configure: creating ./config.status [ 141s] config.status: creating Makefile [ 141s] config.status: creating man/Makefile [ 141s] config.status: creating src/Makefile [ 141s] config.status: creating specs/Makefile [ 141s] config.status: creating xext.pc [ 141s] config.status: creating config.h [ 141s] config.status: executing depfiles commands [ 141s] config.status: executing libtool commands [ 141s] + make -j8 [ 141s] make all-recursive [ 141s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 141s] Making all in man [ 141s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/man' [ 141s] GEN XShapeQueryExtension.3 [ 141s] GEN XShapeQueryVersion.3 [ 141s] GEN XShapeCombineRegion.3 [ 141s] GEN XShapeCombineRectangles.3 [ 141s] GEN XShapeCombineMask.3 [ 141s] GEN XShapeCombineShape.3 [ 141s] GEN XShapeOffsetShape.3 [ 141s] GEN XShapeQueryExtents.3 [ 141s] GEN XShapeSelectInput.3 [ 141s] GEN XShapeInputSelected.3 [ 141s] GEN XShapeGetRectangles.3 [ 141s] GEN XShmQueryExtension.3 [ 141s] GEN XShmPixmapFormat.3 [ 141s] GEN XShmQueryVersion.3 [ 141s] GEN XShmAttach.3 [ 141s] GEN XShmDetach.3 [ 141s] GEN XShmCreateImage.3 [ 141s] GEN XShmPutImage.3 [ 141s] GEN XShmGetImage.3 [ 141s] GEN XShmCreatePixmap.3 [ 141s] GEN XShmGetEventBase.3 [ 141s] GEN XmbufQueryExtension.3 [ 141s] GEN XmbufGetVersion.3 [ 141s] GEN XmbufCreateBuffers.3 [ 141s] GEN XmbufDestroyBuffers.3 [ 141s] GEN XmbufDisplayBuffers.3 [ 141s] GEN XmbufChangeWindowAttributes.3 [ 141s] GEN XmbufGetBufferAttributes.3 [ 141s] GEN XmbufChangeBufferAttributes.3 [ 141s] GEN XmbufGetWindowAttributes.3 [ 141s] GEN XmbufGetScreenInfo.3 [ 141s] GEN XmbufCreateStereoWindow.3 [ 141s] GEN XeviQueryVersion.3 [ 141s] GEN XeviGetVisualInfo.3 [ 141s] GEN DPMSCapable.3 [ 141s] GEN DBE.3 [ 141s] GEN DPMSDisable.3 [ 141s] GEN XeviQueryExtension.3 [ 141s] GEN DPMSForceLevel.3 [ 141s] GEN DPMSGetTimeouts.3 [ 141s] GEN DPMSEnable.3 [ 141s] GEN DPMSGetVersion.3 [ 141s] GEN DPMSInfo.3 [ 141s] GEN DPMSQueryExtension.3 [ 141s] GEN DPMSSetTimeouts.3 [ 141s] GEN XShape.3 [ 141s] GEN XShm.3 [ 141s] GEN XcupGetReservedColormapEntries.3 [ 141s] GEN XcupQueryVersion.3 [ 141s] GEN XcupStoreColors.3 [ 141s] GEN XdbeAllocateBackBufferName.3 [ 141s] GEN XdbeBeginIdiom.3 [ 141s] GEN XdbeDeallocateBackBufferName.3 [ 141s] GEN XdbeFreeVisualInfo.3 [ 141s] GEN XdbeEndIdiom.3 [ 141s] GEN XdbeGetBackBufferAttributes.3 [ 141s] GEN XdbeGetVisualInfo.3 [ 141s] GEN XdbeQueryExtension.3 [ 141s] GEN XdbeSwapBuffers.3 [ 141s] GEN Xevi.3 [ 141s] GEN Xmbuf.3 [ 141s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/man' [ 141s] Making all in src [ 141s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/src' [ 141s] CC DPMS.lo [ 141s] CC MITMisc.lo [ 141s] CC XAppgroup.lo [ 141s] CC XEVI.lo [ 141s] CC XLbx.lo [ 141s] CC XMultibuf.lo [ 141s] CC XSecurity.lo [ 141s] CC XShape.lo [ 141s] CC XShm.lo [ 141s] CC XSync.lo [ 141s] CC XTestExt1.lo [ 141s] CC Xcup.lo [ 141s] CC Xdbe.lo [ 141s] CC Xge.lo [ 141s] XSync.c: In function 'find_display_create_optional': [ 141s] XSync.c:168:34: warning: cast discards 'const' qualifier from pointer target type [-Wcast-qual] [ 141s] (XPointer)GetVersionInfo(dpy)); [ 141s] ^ [ 141s] In file included from XSync.c:57:0: [ 141s] XSync.c: In function 'XSyncAwaitFence': [ 141s] XSync.c:910:17: warning: cast discards 'const' qualifier from pointer target type [-Wcast-qual] [ 141s] Data32(dpy, (char *)fence_list, sizeof(CARD32) * n_fences); [ 141s] ^ [ 141s] XSync.c:910:17: warning: cast discards 'const' qualifier from pointer target type [-Wcast-qual] [ 141s] Data32(dpy, (char *)fence_list, sizeof(CARD32) * n_fences); [ 141s] ^ [ 141s] CC extutil.lo [ 141s] Xge.c:303:11: warning: no previous prototype for 'xgeExtRegister' [-Wmissing-prototypes] [ 141s] _X_HIDDEN xgeExtRegister(Display* dpy, int offset, XExtensionHooks* callbacks) [ 141s] ^ [ 141s] CC globals.lo [ 142s] CCLD libXext.la [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/src' [ 142s] Making all in specs [ 142s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/specs' [ 142s] make[2]: Nothing to be done for `all'. [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/specs' [ 142s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] + exit 0 [ 142s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.PVDEmJ [ 142s] + umask 022 [ 142s] + cd /home/abuild/rpmbuild/BUILD [ 142s] + cd libXext-1.3.2 [ 142s] + LANG=C [ 142s] + export LANG [ 142s] + unset DISPLAY [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 142s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 142s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/license [ 142s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/license/libXext [ 142s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 142s] Making install in man [ 142s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/man' [ 142s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/man' [ 142s] make[2]: Nothing to be done for `install-exec-am'. [ 142s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/man/man3" [ 142s] /usr/bin/install -c -m 644 XShapeQueryExtension.3 XShapeQueryVersion.3 XShapeCombineRegion.3 XShapeCombineRectangles.3 XShapeCombineMask.3 XShapeCombineShape.3 XShapeOffsetShape.3 XShapeQueryExtents.3 XShapeSelectInput.3 XShapeInputSelected.3 XShapeGetRectangles.3 XShmQueryExtension.3 XShmQueryVersion.3 XShmPixmapFormat.3 XShmAttach.3 XShmDetach.3 XShmCreateImage.3 XShmPutImage.3 XShmGetImage.3 XShmCreatePixmap.3 XShmGetEventBase.3 XmbufQueryExtension.3 XmbufGetVersion.3 XmbufCreateBuffers.3 XmbufDestroyBuffers.3 XmbufDisplayBuffers.3 XmbufGetWindowAttributes.3 XmbufChangeWindowAttributes.3 XmbufGetBufferAttributes.3 XmbufChangeBufferAttributes.3 XmbufGetScreenInfo.3 XmbufCreateStereoWindow.3 XeviQueryVersion.3 XeviGetVisualInfo.3 XeviQueryExtension.3 DBE.3 DPMSCapable.3 DPMSDisable.3 DPMSEnable.3 DPMSForceLevel.3 '/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/man/man3' [ 142s] /usr/bin/install -c -m 644 DPMSGetTimeouts.3 DPMSGetVersion.3 DPMSInfo.3 DPMSQueryExtension.3 DPMSSetTimeouts.3 XShape.3 XShm.3 XcupGetReservedColormapEntries.3 XcupQueryVersion.3 XcupStoreColors.3 XdbeAllocateBackBufferName.3 XdbeBeginIdiom.3 XdbeDeallocateBackBufferName.3 XdbeEndIdiom.3 XdbeFreeVisualInfo.3 XdbeGetBackBufferAttributes.3 XdbeGetVisualInfo.3 XdbeQueryExtension.3 XdbeSwapBuffers.3 Xevi.3 Xmbuf.3 '/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/man/man3' [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/man' [ 142s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/man' [ 142s] Making install in src [ 142s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/src' [ 142s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/src' [ 142s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib" [ 142s] /bin/sh ../libtool --mode=install /usr/bin/install -c libXext.la '/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib' [ 142s] libtool: install: /usr/bin/install -c .libs/libXext.so.6.4.0 /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib/libXext.so.6.4.0 [ 142s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib && { ln -s -f libXext.so.6.4.0 libXext.so.6 || { rm -f libXext.so.6 && ln -s libXext.so.6.4.0 libXext.so.6; }; }) [ 142s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib && { ln -s -f libXext.so.6.4.0 libXext.so || { rm -f libXext.so && ln -s libXext.so.6.4.0 libXext.so; }; }) [ 142s] libtool: install: /usr/bin/install -c .libs/libXext.lai /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib/libXext.la [ 142s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 142s] test -z "/usr/include/X11/extensions" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/include/X11/extensions" [ 142s] /usr/bin/install -c -m 644 ../include/X11/extensions/dpms.h ../include/X11/extensions/extutil.h ../include/X11/extensions/MITMisc.h ../include/X11/extensions/multibuf.h ../include/X11/extensions/security.h ../include/X11/extensions/shape.h ../include/X11/extensions/sync.h ../include/X11/extensions/Xag.h ../include/X11/extensions/Xcup.h ../include/X11/extensions/Xdbe.h ../include/X11/extensions/XEVI.h ../include/X11/extensions/Xext.h ../include/X11/extensions/Xge.h ../include/X11/extensions/XLbx.h ../include/X11/extensions/XShm.h ../include/X11/extensions/xtestext1.h '/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/include/X11/extensions' [ 142s] test -z "" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm" [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/src' [ 142s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/src' [ 142s] Making install in specs [ 142s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/specs' [ 142s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/specs' [ 142s] make[2]: Nothing to be done for `install-exec-am'. [ 142s] test -z "/usr/share/doc/libXext" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/doc/libXext" [ 142s] /usr/bin/install -c -m 644 dbelib.xml dpmslib.xml shapelib.xml synclib.xml xtest1.xml '/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/doc/libXext' [ 142s] test -z "/usr/share/doc/libXext" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/doc/libXext" [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/specs' [ 142s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2/specs' [ 142s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] make[2]: Nothing to be done for `install-exec-am'. [ 142s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib/pkgconfig" [ 142s] /usr/bin/install -c -m 644 xext.pc '/home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib/pkgconfig' [ 142s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXext-1.3.2' [ 142s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib/libXext.la [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/doc [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/info [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/doc [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/doc/libXext [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/gtk-doc [ 142s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/share/man [ 142s] + find /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 142s] + xargs rm -f -- [ 142s] + find /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 142s] + xargs rm -f -- [ 142s] + find /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 142s] + xargs rm -f -- [ 142s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libXext-1.3.2 [ 142s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm/usr/lib/libXext.so.6.4.0 [ 142s] symlinked /usr/lib/debug/usr/lib/libXext.so.6.4.0.debug to /usr/lib/debug/usr/lib/libXext.so.6.debug [ 142s] symlinked /usr/lib/debug/usr/lib/libXext.so.6.4.0.debug to /usr/lib/debug/usr/lib/libXext.so.debug [ 142s] 467 blocks [ 142s] + /usr/lib/rpm/check-buildroot [ 143s] + /usr/lib/rpm//brp-compress [ 143s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 143s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 143s] + /usr/lib/rpm/brp-python-hardlink [ 143s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 143s] Processing files: libXext-1.3.2-1.1.armv7l [ 143s] Provides: libXext.so.6 [ 143s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 143s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 143s] Requires(post): /sbin/ldconfig [ 143s] Requires(postun): /sbin/ldconfig [ 143s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 143s] Processing files: libXext-debuginfo-1.3.2-1.1.armv7l [ 143s] Processing files: libXext-debugsource-1.3.2-1.1.armv7l [ 143s] Processing files: libXext-devel-1.3.2-1.1.armv7l [ 143s] Provides: libxext-devel pkgconfig(xext) = 1.3.2 [ 143s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 143s] Requires: /usr/bin/pkg-config libXext.so.6 pkgconfig(x11) pkgconfig(xextproto) [ 143s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 143s] Wrote: /home/abuild/rpmbuild/SRPMS/libXext-1.3.2-1.1.src.rpm [ 143s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXext-1.3.2-1.1.armv7l.rpm [ 143s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXext-debuginfo-1.3.2-1.1.armv7l.rpm [ 143s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXext-debugsource-1.3.2-1.1.armv7l.rpm [ 143s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXext-devel-1.3.2-1.1.armv7l.rpm [ 143s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.pTnfMS [ 143s] + umask 022 [ 143s] + cd /home/abuild/rpmbuild/BUILD [ 143s] + cd libXext-1.3.2 [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXext-1.3.2-1.1.arm [ 143s] + exit 0 [ 143s] ... checking for files with abuild user/group [ 143s] ... creating baselibs [ 143s] no targets for arch armv7l, nothing to do [ 143s] ... saving built statistics [ 143s] ... saving built packages [ 143s] /home/abuild/rpmbuild/RPMS/armv7l/libXext-1.3.2-1.1.armv7l.rpm [ 143s] /home/abuild/rpmbuild/RPMS/armv7l/libXext-debuginfo-1.3.2-1.1.armv7l.rpm [ 143s] /home/abuild/rpmbuild/RPMS/armv7l/libXext-debugsource-1.3.2-1.1.armv7l.rpm [ 143s] /home/abuild/rpmbuild/RPMS/armv7l/libXext-devel-1.3.2-1.1.armv7l.rpm [ 143s] /home/abuild/rpmbuild/SRPMS/libXext-1.3.2-1.1.src.rpm [ 143s] /home/abuild/rpmbuild/OTHER/_statistics [ 144s] [ 144s] w08 finished "build libXext.spec" at Thu Oct 29 05:06:10 UTC 2015. [ 144s] [ 145s] /.build/build: line 368: 238 Killed background_monitor_process [ 147s] [ 137.298495] SysRq : Power Off [ 147s] [ 137.416544] Power down. [ 147s] build: extracting built packages... [ 147s] libXext-1.3.2-1.1.armv7l.rpm [ 147s] libXext-debuginfo-1.3.2-1.1.armv7l.rpm [ 147s] libXext-debugsource-1.3.2-1.1.armv7l.rpm [ 147s] libXext-devel-1.3.2-1.1.armv7l.rpm [ 147s] libXext-1.3.2-1.1.src.rpm [ 147s] _statistics