[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w28 started "build _service:gbs:xorg-launch-helper.spec" at Thu Oct 29 05:10:26 UTC 2015. [ 0s] [ 0s] Building xorg-launch-helper for project 'Tizen:2.4:Mobile' repository 'target-TM1' arch 'armv7l' srcmd5 'cf68fb7927650727b08403424ae7fcdd' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:xorg-launch-helper.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:xorg-launch-helper.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:xorg-launch-helper.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: glibc -> glibc-common -> bash [ 0s] breaking dependency glibc-common -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: glibc -> glibc-common -> coreutils [ 0s] breaking dependency coreutils -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> glibc [ 0s] cycle: glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libattr -> glibc [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency libacl -> libattr [ 0s] cycle: libgcc -> glibc -> glibc-common -> coreutils -> libacl [ 0s] breaking dependency glibc-common -> coreutils [ 0s] cycle: glibc -> glibc-common [ 0s] breaking dependency glibc -> glibc-common [ 0s] cycle: libgcc -> glibc [ 0s] breaking dependency libgcc -> glibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/52] preinstalling tizen-release... [ 0s] [2/52] preinstalling libgcc... [ 0s] [3/52] preinstalling setup... [ 0s] [4/52] preinstalling filesystem... [ 0s] [5/52] preinstalling glibc... [ 0s] [6/52] preinstalling libattr... [ 0s] [7/52] preinstalling libacl... [ 0s] [8/52] preinstalling bash... [ 0s] [9/52] preinstalling bzip2-libs... [ 0s] [10/52] preinstalling diffutils... [ 0s] [11/52] preinstalling elfutils-libelf... [ 0s] [12/52] preinstalling libcap... [ 0s] [13/52] preinstalling liblua... [ 1s] [14/52] preinstalling libstdc++... [ 1s] [15/52] preinstalling ncurses-libs... [ 1s] [16/52] preinstalling nspr... [ 1s] [17/52] preinstalling nss-softokn-freebl... [ 1s] [18/52] preinstalling popt... [ 1s] [19/52] preinstalling readline... [ 1s] [20/52] preinstalling sed... [ 1s] [21/52] preinstalling sqlite... [ 1s] [22/52] preinstalling xz-libs... [ 1s] [23/52] preinstalling zlib... [ 1s] [24/52] preinstalling glibc-common... [ 1s] [25/52] preinstalling tar... [ 1s] [26/52] preinstalling coreutils... [ 1s] [27/52] preinstalling qemu-linux-user-x86-arm... [ 1s] [28/52] preinstalling tizen-accelerator... [ 1s] [29/52] preinstalling libfile... [ 1s] [30/52] preinstalling bzip2... [ 1s] [31/52] preinstalling nss... [ 1s] [32/52] preinstalling bzip2-libs-x86-arm... [ 1s] [33/52] preinstalling elfutils-libelf-x86-arm... [ 1s] [34/52] preinstalling glibc-x86-arm... [ 1s] [35/52] preinstalling libacl-x86-arm... [ 1s] [36/52] preinstalling libattr-x86-arm... [ 1s] [37/52] preinstalling libcap-x86-arm... [ 1s] [38/52] preinstalling libgcc-x86-arm... [ 1s] [39/52] preinstalling liblua-x86-arm... [ 1s] [40/52] preinstalling ncurses-libs-x86-arm... [ 1s] [41/52] preinstalling nspr-x86-arm... [ 1s] [42/52] preinstalling nss-softokn-freebl-x86-arm... [ 1s] [43/52] preinstalling nss-x86-arm... [ 1s] [44/52] preinstalling popt-x86-arm... [ 1s] [45/52] preinstalling sqlite-x86-arm... [ 1s] [46/52] preinstalling xz-libs-x86-arm... [ 1s] [47/52] preinstalling zlib-x86-arm... [ 1s] [48/52] preinstalling rpm-libs... [ 1s] [49/52] preinstalling bash-x86-arm... [ 2s] [50/52] preinstalling rpm-libs-x86-arm... [ 2s] [51/52] preinstalling rpm... [ 2s] [52/52] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> glibc -> glibc-common [ 3s] breaking dependency glibc-common -> bash [ 3s] cycle: bash -> glibc -> glibc-common -> coreutils [ 3s] breaking dependency glibc-common -> coreutils [ 3s] cycle: glibc -> glibc-common -> findutils [ 3s] breaking dependency glibc-common -> findutils [ 3s] cycle: glibc -> glibc-common [ 3s] breaking dependency glibc-common -> glibc [ 3s] cycle: glibc -> glibc-common -> grep [ 3s] breaking dependency grep -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> glibc [ 3s] cycle: glibc -> glibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency glibc -> glibc-common [ 3s] cycle: glibc -> libgcc [ 3s] breaking dependency libgcc -> glibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: gio-branding-upstream -> libgio [ 3s] breaking dependency libgio -> gio-branding-upstream [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus -> dbus-libs [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 4s] booting kvm ... [ 4s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 7s] [ 0.000000] tsc: Fast TSC calibration failed [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 4752/2392064 files, 226088/9568256 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] /.build/qemu-reg: line 9: interpreter '/usr/bin/qemu-armeb-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 10: interpreter '/usr/bin/qemu-ppc-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 11: interpreter '/usr/bin/qemu-mips-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 12: interpreter '/usr/bin/qemu-mipsel-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 18: interpreter '/usr/bin/qemu-sh4-binfmt' not found, ignoring [ 13s] /.build/qemu-reg: line 19: interpreter '/usr/bin/qemu-sh4eb-binfmt' not found, ignoring [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] swapon on /dev/vdb [ 15s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 15s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 15s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 15s] logging output to //.build.log... [ 15s] processing specfile /.build-srcdir/_service:gbs:xorg-launch-helper.spec ... [ 15s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-launch-helper.spec build rpmlint-Factory ... [ 15s] running rpm-x86-arm postinstall script [ 16s] running rpm-libs-x86-arm postinstall script [ 16s] running tizen-accelerator postinstall script [ 16s] running glibc-x86-arm postinstall script [ 16s] running bash-x86-arm postinstall script [ 16s] initializing rpm db... [ 22s] [1/204] cumulate cross-armv7l-platformfile-0.0.1-1.1 [ 24s] [2/204] cumulate kernel-headers-3.4.91-1.1 [ 24s] [3/204] cumulate libX11-common-1.6.2-1.1 [ 25s] [4/204] cumulate tizen-release-2.2.0-1.1 [ 25s] [5/204] cumulate tzdata-2014j-1.1 [ 26s] [6/204] cumulate libgcc-4.9.2-2015.02.1.11 [ 26s] [7/204] cumulate setup-0.2-1.1 [ 26s] [8/204] cumulate filesystem-0.1-1.1 [ 26s] [9/204] cumulate glibc-2.20-2014.11.1.10 [ 26s] [10/204] cumulate libstdc++-4.9.2-2015.02.1.11 [ 26s] [11/204] cumulate libatomic-4.9.2-2015.02.1.11 [ 26s] [12/204] cumulate libgomp-4.9.2-2015.02.1.11 [ 26s] [13/204] cumulate openssl-1.0.1p-1.5 [ 27s] [14/204] cumulate smack-1.0+s14-1.8 [ 27s] [15/204] cumulate bash-4.1-1.6 [ 27s] [16/204] cumulate bzip2-libs-1.0.5-1.8 [ 27s] [17/204] cumulate capi-base-common-0.2.2-1.1 [ 27s] [18/204] cumulate cpio-2.8-1.6 [ 27s] [19/204] cumulate db4-4.8.30-1.8 [ 27s] [20/204] cumulate diffutils-3.0-1.6 [ 27s] [21/204] cumulate e2fsprogs-libs-1.41.9-1.4 [ 27s] [22/204] cumulate elfutils-libelf-0.152-1.12 [ 27s] [23/204] cumulate expat-2.0.1-1.8 [ 27s] [24/204] cumulate fdupes-1.40-1.5 [ 28s] [25/204] cumulate findutils-4.2.31-1.5 [ 28s] [26/204] cumulate gdbm-1.8.3-1.12 [ 28s] [27/204] cumulate libXau-1.0.8-1.1 [ 28s] [28/204] cumulate libattr-2.4.44-1.8 [ 28s] [29/204] cumulate libffi-3.1-1.1 [ 28s] [30/204] cumulate libglib-2.44.1-1.1 [ 29s] [31/204] cumulate libitm-4.9.2-2015.02.1.11 [ 29s] [32/204] cumulate liblua-5.1.4-1.6 [ 29s] [33/204] cumulate libuuid-2.20.2-1.4 [ 29s] [34/204] cumulate m4-1.4.14-1.5 [ 29s] [35/204] cumulate net-tools-1.60-2.6 [ 29s] [36/204] cumulate nspr-4.9-1.9 [ 29s] [37/204] cumulate nss-softokn-freebl-3.12.9-1.17 [ 29s] [38/204] cumulate patch-2.6-1.6 [ 29s] [39/204] cumulate pkg-config-0.25-2.6 [ 29s] [40/204] cumulate popt-1.16-1.8 [ 29s] [41/204] cumulate readline-5.2-1.6 [ 29s] [42/204] cumulate ruby-1.9.2-1.6 [ 29s] [43/204] cumulate sed-4.1.5-1.5 [ 29s] [44/204] cumulate sqlite-3.8.10.2-1.8 [ 29s] [45/204] cumulate xz-libs-5.0.3-1.8 [ 30s] [46/204] cumulate zlib-1.2.8-1.8 [ 30s] [47/204] cumulate libasan-4.9.2-2015.02.1.11 [ 30s] [48/204] cumulate libpcre-7.7-1.25 [ 30s] [49/204] cumulate libubsan-4.9.2-2015.02.1.11 [ 30s] [50/204] cumulate patchelf-0.5.svn20809-1.5 [ 30s] [51/204] cumulate ncurses-libs-5.7-1.8 [ 30s] [52/204] cumulate build-compare-2009.10.14-1.6 [ 30s] [53/204] cumulate libpthread-stubs-0.3-1.1 [ 30s] [54/204] cumulate qemu-linux-user-x86-arm-2.2.0-4.1.1 [ 30s] [55/204] cumulate xorg-x11-proto-core-7.0.31-1.1 [ 30s] [56/204] cumulate xorg-x11-proto-kb-1.0.6-1.1 [ 30s] [57/204] cumulate capi-base-common-devel-0.2.2-1.1 [ 30s] [58/204] cumulate cpp-4.9.2-2015.02.1.11 [ 30s] [59/204] cumulate glibc-headers-2.20-2014.11.1.10 [ 30s] [60/204] cumulate libcap-2.21-1.6 [ 30s] [61/204] cumulate unzip-6.0-1.12 [ 30s] [62/204] cumulate zlib-devel-1.2.8-1.8 [ 30s] [63/204] cumulate grep-2.5.1a-1.5 [ 30s] [64/204] cumulate libacl-2.2.49-1.5 [ 30s] [65/204] cumulate libfile-5.04-1.7 [ 31s] [66/204] cumulate libgmodule-2.44.1-1.1 [ 31s] [67/204] cumulate libgthread-2.44.1-1.1 [ 31s] [68/204] cumulate libpython-2.7.1-1.5 [ 31s] [69/204] cumulate libxcb-1.10.0-1.1 [ 31s] [70/204] cumulate libxml2-2.9.2-1.3 [ 31s] [71/204] cumulate make-3.82-154.1.6 [ 31s] [72/204] cumulate ncurses-5.7-1.8 [ 31s] [73/204] cumulate pcre-7.7-1.25 [ 31s] [74/204] cumulate psmisc-22.20-1.6 [ 31s] [75/204] cumulate smack-utils-1.0+s14-1.8 [ 31s] [76/204] cumulate binutils-2.25.0-2015.01.1.8 [ 31s] [77/204] cumulate bzip2-1.0.5-1.8 [ 31s] [78/204] cumulate kmod-libs-15-1.1 [ 31s] [79/204] cumulate libblkid-2.20.2-1.4 [ 31s] [80/204] cumulate libgobject-2.44.1-1.1 [ 31s] [81/204] cumulate xz-5.0.3-1.8 [ 31s] [82/204] cumulate elfutils-libs-0.152-1.12 [ 31s] [83/204] cumulate ttrace-1.0.0-1.1 [ 31s] [84/204] cumulate nss-3.12.9-1.17 [ 31s] [85/204] cumulate perl-5.12.1-1.25 [ 31s] [86/204] cumulate ncurses-base-5.7-1.8 [ 31s] [87/204] cumulate perl-HTML-Tagset-3.20-1.1 [ 31s] [88/204] cumulate perl-IO-Compress-Base-2.008-1.25 [ 31s] [89/204] cumulate perl-Module-Pluggable-3.60-1.25 [ 31s] [90/204] cumulate perl-Pod-Escapes-1.04-1.25 [ 31s] [91/204] cumulate perl-TimeDate-1.20-1.1 [ 31s] [92/204] cumulate perl-URI-1.54-1.1 [ 31s] [93/204] cumulate glibc-devel-2.20-2014.11.1.10 [ 31s] [94/204] cumulate file-5.04-1.7 [ 31s] [95/204] cumulate libXau-devel-1.0.8-1.1 [ 31s] [96/204] cumulate libxslt-1.1.28-1.2 [ 31s] [97/204] cumulate perl-Compress-Raw-Zlib-2.008-1.25 [ 31s] [98/204] cumulate perl-libs-5.12.1-1.25 [ 31s] [99/204] cumulate tar-1.17-1.6 [ 31s] [100/204] cumulate coreutils-6.9-1.6 [ 31s] [101/204] cumulate libX11-1.6.2-1.1 [ 31s] [102/204] cumulate libdlog-0.4.1-1.1 [ 31s] [103/204] cumulate libmount-2.20.2-1.4 [ 31s] [104/204] cumulate xz-lzma-compat-5.0.3-1.8 [ 31s] [105/204] cumulate elfutils-0.152-1.12 [ 32s] [106/204] cumulate nss-sysinit-3.12.9-1.17 [ 32s] [107/204] cumulate python-base-2.7.1-1.5 [ 32s] [108/204] cumulate glibc-common-2.20-2014.11.1.10 [ 32s] [109/204] cumulate libgio-2.44.1-1.1 [ 32s] [110/204] cumulate libarchive-2.8.3-1.2 [ 32s] [111/204] cumulate rpm-libs-4.9.1-4.3.1.10 [ 32s] [112/204] cumulate gio-branding-upstream-2.44.1-1.1 [ 32s] [113/204] cumulate libstdc++-devel-4.9.2-2015.02.1.11 [ 32s] [114/204] cumulate perl-Pod-Simple-3.07-1.25 [ 32s] [115/204] cumulate tizen-accelerator-1.0.1-1.1 [ 32s] [116/204] cumulate libdlog-devel-0.4.1-1.1 [ 32s] [117/204] cumulate perl-IO-Compress-Zlib-2.008-1.25 [ 32s] [118/204] cumulate gawk-3.1.5-1.6 [ 32s] [119/204] cumulate gzip-1.3.12-1.6 [ 32s] [120/204] cumulate libxcb-devel-1.10.0-1.1 [ 32s] [121/204] cumulate pam-1.1.5-1.5 [ 32s] [122/204] cumulate perl-HTML-Parser-3.65-1.5 [ 32s] [123/204] cumulate python-xml-2.7.1-1.5 [ 32s] [124/204] cumulate autoconf-2.68-1.1 [ 32s] [125/204] cumulate build-2011.01.10a-1.1 [ 32s] [126/204] installing rpm-4.9.1-4.3.1.10 [ 32s] [127/204] cumulate python-lxml-2.2.3-1.2 [ 32s] [128/204] cumulate dbus-1.8.16-1.1 [ 32s] [129/204] cumulate glib2-tools-2.44.1-1.1 [ 32s] [130/204] cumulate util-linux-2.20.2-1.4 [ 32s] [131/204] cumulate cmake-2.8.5-1.1.2 [ 32s] [132/204] cumulate python-2.7.1-1.3 [ 32s] [133/204] cumulate gcc-4.9.2-2015.02.1.11 [ 33s] [134/204] cumulate automake-1.11.1-1.1 [ 33s] [135/204] cumulate bzip2-libs-x86-arm-1.0.5-9.1.4 [ 33s] [136/204] cumulate dbus-libs-1.8.16-1.1 [ 33s] [137/204] cumulate elfutils-libelf-x86-arm-0.152-9.1.4 [ 33s] [138/204] cumulate elfutils-libs-x86-arm-0.152-9.1.4 [ 33s] [139/204] cumulate expat-x86-arm-2.0.1-1.4 [ 33s] [140/204] cumulate glibc-x86-arm-2.20-9.1.5 [ 33s] [141/204] cumulate libacl-x86-arm-2.2.49-9.1.4 [ 33s] [142/204] cumulate libarchive-x86-arm-2.8.3-1.3 [ 33s] [143/204] cumulate libattr-x86-arm-2.4.44-9.1.4 [ 33s] [144/204] cumulate libcap-x86-arm-2.21-9.1.4 [ 33s] [145/204] cumulate libfile-x86-arm-5.04-9.1.4 [ 33s] [146/204] cumulate libgcc-x86-arm-4.9.2-9.1.4 [ 33s] [147/204] cumulate liblua-x86-arm-5.1.4-9.1.3 [ 34s] [148/204] cumulate libpython-x86-arm-2.7.1-9.1.3 [ 34s] [149/204] cumulate libstdc++-x86-arm-4.9.2-9.1.4 [ 34s] [150/204] cumulate libxml2-x86-arm-2.9.2-9.1.3 [ 34s] [151/204] cumulate libxslt-x86-arm-1.1.28-9.1.3 [ 34s] [152/204] cumulate ncurses-libs-x86-arm-5.7-9.1.3 [ 34s] [153/204] cumulate nspr-x86-arm-4.9-9.1.5 [ 34s] [154/204] cumulate nss-softokn-freebl-x86-arm-3.12.9-9.1.5 [ 34s] [155/204] cumulate nss-x86-arm-3.12.9-9.1.5 [ 34s] [156/204] cumulate openssl-x86-arm-1.0.1p-9.1.3 [ 34s] [157/204] cumulate perl-libs-x86-arm-5.12.1-9.1.5 [ 34s] [158/204] cumulate popt-x86-arm-1.16-9.1.4 [ 34s] [159/204] cumulate python-lxml-x86-arm-2.2.3-9.1.3 [ 34s] [160/204] cumulate python-x86-arm-2.7.1-9.1.3 [ 34s] [161/204] cumulate python-xml-x86-arm-2.7.1-9.1.3 [ 34s] [162/204] cumulate rpm-libs-x86-arm-4.9.1-9.1.4 [ 34s] [163/204] cumulate sqlite-x86-arm-3.8.10.2-9.1.3 [ 34s] [164/204] cumulate xz-libs-x86-arm-5.0.3-9.1.4 [ 34s] [165/204] cumulate zlib-x86-arm-1.2.8-9.1.4 [ 34s] [166/204] cumulate gcc-c++-4.9.2-2015.02.1.11 [ 34s] [167/204] cumulate perl-Compress-Zlib-2.008-1.25 [ 34s] [168/204] cumulate systemd-libs-216-1.1 [ 34s] [169/204] cumulate ttrace-devel-1.0.0-1.1 [ 34s] [170/204] cumulate libX11-devel-1.6.2-1.1 [ 34s] [171/204] cumulate glib2-devel-2.44.1-1.1 [ 34s] [172/204] cumulate rpm-build-4.9.1-4.3.1.10 [ 34s] [173/204] cumulate bash-x86-arm-4.1-9.1.4 [ 35s] [174/204] cumulate diffutils-x86-arm-3.0-9.1.4 [ 35s] [175/204] cumulate fdupes-x86-arm-1.40-9.1.4 [ 35s] [176/204] cumulate findutils-x86-arm-4.2.31-9.1.4 [ 35s] [177/204] cumulate gawk-x86-arm-3.1.5-9.1.3 [ 35s] [178/204] cumulate gzip-x86-arm-1.3.12-9.1.4 [ 35s] [179/204] cumulate libtool-2.2.6b-1.8 [ 35s] [180/204] cumulate m4-x86-arm-1.4.14-9.1.4 [ 35s] [181/204] cumulate make-x86-arm-3.82-9.1.3 [ 35s] [182/204] cumulate patch-x86-arm-2.6-9.1.4 [ 35s] [183/204] cumulate perl-libwww-perl-5.836-1.1 [ 35s] [184/204] cumulate pkg-config-x86-arm-0.25-9.1.4 [ 35s] [185/204] cumulate ruby-x86-arm-1.9.2-9.1.4 [ 35s] [186/204] cumulate sed-x86-arm-4.1.5-9.1.4 [ 35s] [187/204] cumulate bzip2-x86-arm-1.0.5-1.4 [ 35s] [188/204] cumulate perl-x86-arm-5.12.1-9.1.5 [ 35s] [189/204] cumulate python-base-x86-arm-2.7.1-9.1.3 [ 35s] [190/204] cumulate coreutils-x86-arm-6.9-9.1.4 [ 35s] [191/204] cumulate cross-armv7l-gcc-accel-x86-armv7l-4.9.2-2015.02.1.6 [ 35s] [192/204] cumulate file-x86-arm-5.04-9.1.4 [ 35s] [193/204] cumulate tar-x86-arm-1.17-9.1.4 [ 35s] [194/204] cumulate elfutils-x86-arm-0.152-9.1.4 [ 35s] [195/204] cumulate systemd-216-1.1 [ 36s] [196/204] cumulate cmake-x86-arm-2.8.5-1.3 [ 36s] [197/204] cumulate rpm-x86-arm-4.9.1-9.1.4 [ 36s] [198/204] cumulate rpm-build-x86-arm-4.9.1-9.1.4 [ 36s] [199/204] cumulate systemd-devel-216-1.1 [ 36s] [200/204] cumulate perl-HTML-Parser-x86-arm-3.65-9.1.3 [ 36s] [201/204] cumulate cross-armv7l-binutils-accel-x86-armv7l-2.25.0-2015.01.1.3 [ 36s] [202/204] cumulate perl-XML-Parser-2.36-1.6 [ 36s] [203/204] cumulate perl-XML-Parser-x86-arm-2.36-9.1.3 [ 36s] [204/204] now installing cumulated packages [ 36s] Preparing... ################################################## [ 36s] setup ################################################## [ 36s] filesystem ################################################## [ 36s] tzdata ################################################## [ 36s] libX11-common ################################################## [ 36s] tizen-release ################################################## [ 37s] kernel-headers ################################################## [ 37s] cross-armv7l-platformfile ################################################## [ 37s] bash ################################################## [ 37s] findutils ################################################## [ 37s] grep ################################################## [ 37s] coreutils ################################################## [ 37s] glibc-common ################################################## [ 37s] libgcc ################################################## [ 37s] /sbin/ldconfig: relative path `1' used to build cache [ 37s] warning: %post(libgcc-4.9.2-2015.02.1.11.armv7l) scriptlet failed, exit status 1 [ 37s] glibc ################################################## [ 37s] libstdc++ ################################################## [ 37s] libattr ################################################## [ 37s] libacl ################################################## [ 37s] libpcre ################################################## [ 37s] tizen-accelerator ################################################## [ 38s] glibc-x86-arm ################################################## [ 38s] libattr-x86-arm ################################################## [ 38s] libacl-x86-arm ################################################## [ 38s] libgcc-x86-arm ################################################## [ 38s] libstdc++-x86-arm ################################################## [ 39s] glibc-headers ################################################## [ 39s] glibc-devel ################################################## [ 39s] libstdc++-devel ################################################## [ 39s] coreutils-x86-arm ################################################## [ 41s] bash-x86-arm ################################################## [ 41s] findutils-x86-arm ################################################## [ 41s] build-compare ################################################## [ 42s] qemu-linux-user-x86-arm ################################################## [ 42s] zlib ################################################## [ 42s] pkg-config ################################################## [ 42s] xz-libs ################################################## [ 42s] zlib-x86-arm ################################################## [ 42s] bzip2-libs ################################################## [ 42s] elfutils-libelf ################################################## [ 42s] libglib ################################################## [ 42s] bzip2-libs-x86-arm ################################################## [ 42s] ncurses-libs ################################################## [ 42s] ncurses ################################################## [ 42s] ncurses-base ################################################## [ 42s] libpython ################################################## [ 43s] python-base ################################################## [ 43s] libxml2 ################################################## [ 43s] binutils ################################################## [ 43s] libcap ################################################## [ 43s] expat ################################################## [ 43s] elfutils-libelf-x86-arm ################################################## [ 43s] xz-libs-x86-arm ################################################## [ 43s] libgmodule ################################################## [ 43s] libfile ################################################## [ 43s] openssl ################################################## [ 43s] libuuid ################################################## [ 43s] libblkid ################################################## [ 43s] nspr ################################################## [ 43s] popt ################################################## [ 43s] sed ################################################## [ 43s] sqlite ################################################## [ 43s] popt-x86-arm ################################################## [ 43s] nspr-x86-arm ################################################## [ 43s] libfile-x86-arm ################################################## [ 43s] libcap-x86-arm ################################################## [ 43s] xorg-x11-proto-core ################################################## [ 43s] libarchive ################################################## [ 43s] file ################################################## [ 43s] libxslt ################################################## [ 43s] python-xml ################################################## [ 43s] elfutils-libs ################################################## [ 43s] elfutils ################################################## [ 43s] bzip2 ################################################## [ 43s] xz ################################################## [ 43s] tar ################################################## [ 43s] smack ################################################## [ 43s] capi-base-common ################################################## [ 43s] diffutils ################################################## [ 43s] libXau ################################################## [ 43s] libxcb ################################################## [ 43s] libX11 ################################################## [ 43s] dbus-libs ################################################## [ 43s] dbus ################################################## [ 43s] liblua ################################################## [ 43s] liblua-x86-arm ################################################## [ 43s] m4 ################################################## [ 43s] nss-softokn-freebl ################################################## [ 43s] nss ################################################## [ 43s] nss-sysinit ################################################## [ 44s] nss-x86-arm ################################################## [ 44s] rpm-libs ################################################## [ 44s] rpm-libs-x86-arm ################################################## [ 44s] patch ################################################## [ 44s] gawk ################################################## [ 44s] gzip ################################################## [ 44s] pam ################################################## [ 44s] libXau-devel ################################################## [ 44s] capi-base-common-devel ################################################## [ 44s] elfutils-libs-x86-arm ################################################## [ 44s] libarchive-x86-arm ################################################## [ 44s] openssl-x86-arm ################################################## [ 44s] libxml2-x86-arm ################################################## [ 44s] libpython-x86-arm ################################################## [ 44s] libpthread-stubs ################################################## [ 44s] libxcb-devel ################################################## [ 44s] xorg-x11-proto-kb ################################################## [ 44s] zlib-devel ################################################## [ 44s] systemd-libs ################################################## [ 44s] ttrace ################################################## [ 44s] smack-utils ################################################## [ 44s] libdlog ################################################## [ 44s] libdlog-devel ################################################## [ 44s] xz-lzma-compat ################################################## [ 44s] python-lxml ################################################## [ 44s] cmake ################################################## [ 44s] libmount ################################################## [ 44s] libgthread ################################################## [ 45s] kmod-libs ################################################## [ 45s] systemd ################################################## [ 45s] cpp ################################################## [ 45s] libasan ################################################## [ 45s] libubsan ################################################## [ 45s] libatomic ################################################## [ 45s] libgomp ################################################## [ 45s] cpio ################################################## [ 45s] db4 ################################################## [ 45s] fdupes ################################################## [ 45s] gdbm ################################################## [ 45s] perl-Pod-Escapes ################################################## [ 45s] perl-Compress-Raw-Zlib ################################################## [ 45s] perl-IO-Compress-Base ################################################## [ 45s] perl-Module-Pluggable ################################################## [ 45s] perl-Pod-Simple ################################################## [ 45s] perl-IO-Compress-Zlib ################################################## [ 45s] perl-libs ################################################## [ 46s] perl ################################################## [ 46s] perl-URI ################################################## [ 47s] autoconf ################################################## [ 47s] automake ################################################## [ 47s] perl-HTML-Tagset ################################################## [ 47s] perl-TimeDate ################################################## [ 47s] perl-Compress-Zlib ################################################## [ 47s] perl-libs-x86-arm ################################################## [ 47s] perl-x86-arm ################################################## [ 48s] perl-HTML-Parser ################################################## [ 48s] perl-libwww-perl ################################################## [ 48s] perl-XML-Parser ################################################## [ 48s] libffi ################################################## [ 48s] libgobject ################################################## [ 48s] gio-branding-upstream ################################################## [ 48s] libgio ################################################## [ 48s] glib2-tools ################################################## [ 48s] libitm ################################################## [ 48s] gcc ################################################## [ 48s] gcc-c++ ################################################## [ 50s] cross-armv7l-gcc-accel-x86-a################################################## [ 50s] "GCCVER: 4.9 GCCVER_NEW: 4.9 " [ 50s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 50s] readline ################################################## [ 50s] python ################################################## [ 50s] ruby ################################################## [ 50s] unzip ################################################## [ 50s] rpm-build ################################################## [ 50s] make ################################################## [ 50s] make-x86-arm ################################################## [ 50s] rpm-build-x86-arm ################################################## [ 50s] ruby-x86-arm ################################################## [ 51s] python-x86-arm ################################################## [ 51s] cross-armv7l-binutils-accel-################################################## [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/addr2line': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ar': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/as': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/c++filt': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/elfedit': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/gprof': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.bfd': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ld.gold': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/nm': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objcopy': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/objdump': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/ranlib': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/readelf': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/size': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strings': File exists [ 51s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/strip': File exists [ 52s] perl-XML-Parser-x86-arm ################################################## [ 52s] perl-HTML-Parser-x86-arm ################################################## [ 52s] build ################################################## [ 52s] libtool ################################################## [ 52s] fdupes-x86-arm ################################################## [ 52s] systemd-devel ################################################## [ 52s] cmake-x86-arm ################################################## [ 52s] python-lxml-x86-arm ################################################## [ 52s] ttrace-devel ################################################## [ 52s] libX11-devel ################################################## [ 53s] python-base-x86-arm ################################################## [ 53s] elfutils-x86-arm ################################################## [ 54s] gzip-x86-arm ################################################## [ 54s] gawk-x86-arm ################################################## [ 54s] patch-x86-arm ################################################## [ 54s] rpm-x86-arm ################################################## [ 54s] /bin/rpm.orig-arm already present - skipping. [ 54s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 54s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 54s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 54s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 54s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 54s] nss-softokn-freebl-x86-arm ################################################## [ 54s] m4-x86-arm ################################################## [ 54s] diffutils-x86-arm ################################################## [ 54s] tar-x86-arm ################################################## [ 54s] bzip2-x86-arm ################################################## [ 54s] python-xml-x86-arm ################################################## [ 54s] libxslt-x86-arm ################################################## [ 54s] mv: cannot stat `/usr/bin/xsltproc': No such file or directory [ 54s] file-x86-arm ################################################## [ 54s] sqlite-x86-arm ################################################## [ 54s] sed-x86-arm ################################################## [ 54s] expat-x86-arm ################################################## [ 54s] ncurses-libs-x86-arm ################################################## [ 54s] pkg-config-x86-arm ################################################## [ 54s] glib2-devel ################################################## [ 54s] util-linux ################################################## [ 54s] psmisc ################################################## [ 54s] pcre ################################################## [ 54s] patchelf ################################################## [ 54s] e2fsprogs-libs ################################################## [ 54s] net-tools ################################################## [ 55s] removing nis flags from //etc/nsswitch.conf... [ 55s] now finalizing build dir... [ 57s] build target is armv7l-tizen-linux [ 57s] ----------------------------------------------------------------- [ 57s] I have the following modifications for xorg-launch-helper.spec: [ 57s] 4c4 [ 57s] < Release: 4 [ 57s] --- [ 57s] > Release: %{?release_prefix:%{release_prefix}.}1.1 [ 57s] 62a63 [ 57s] > %changelog [ 57s] ----------------------------------------------------------------- [ 57s] ----- building xorg-launch-helper.spec (user abuild) [ 57s] ----------------------------------------------------------------- [ 57s] ----------------------------------------------------------------- [ 57s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:2.4:Mobile/target-TM1/cf68fb7927650727b08403424ae7fcdd-xorg-launch-helper' /home/abuild/rpmbuild/SOURCES/xorg-launch-helper.spec [ 57s] Building target platforms: armv7l-tizen-linux [ 57s] Building for target armv7l-tizen-linux [ 57s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.02syzB [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + rm -rf xorg-launch-helper-4.0.3 [ 57s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-launch-helper-4.0.3.tar.gz [ 57s] + /bin/tar -xf - [ 57s] + STATUS=0 [ 57s] + '[' 0 -ne 0 ']' [ 57s] + cd xorg-launch-helper-4.0.3 [ 57s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 57s] + cp /home/abuild/rpmbuild/SOURCES/xorg-launch-helper.manifest . [ 57s] + exit 0 [ 57s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MPCw3N [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd xorg-launch-helper-4.0.3 [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + LD_AS_NEEDED=1 [ 57s] + export LD_AS_NEEDED [ 57s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + autoreconf -v --install --force [ 57s] autoreconf: Entering directory `.' [ 57s] autoreconf: configure.ac: not using Gettext [ 58s] autoreconf: running: aclocal --force [ 59s] autoreconf: configure.ac: tracing [ 59s] autoreconf: configure.ac: not using Libtool [ 59s] autoreconf: running: /usr/bin/autoconf --force [ 59s] autoreconf: running: /usr/bin/autoheader --force [ 60s] autoreconf: running: automake --add-missing --copy --force-missing [ 60s] configure.ac:6: installing `./install-sh' [ 60s] configure.ac:6: installing `./missing' [ 60s] Makefile.am: installing `./depcomp' [ 60s] autoreconf: Leaving directory `.' [ 60s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-systemduserunitdir=/usr/lib/systemd/system [ 61s] checking for a BSD-compatible install... /usr/bin/install -c [ 62s] checking whether build environment is sane... yes [ 62s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 62s] checking for gawk... gawk [ 62s] checking whether make sets $(MAKE)... yes [ 62s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 62s] checking whether the C compiler works... yes [ 62s] checking for C compiler default output file name... a.out [ 62s] checking for suffix of executables... [ 62s] checking whether we are cross compiling... no [ 62s] checking for suffix of object files... o [ 62s] checking whether we are using the GNU C compiler... yes [ 62s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 62s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 62s] checking for style of include used by make... GNU [ 62s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 63s] checking for main in -lrt... yes [ 63s] checking for armv7l-tizen-linux-gnueabi-pkg-config... no [ 63s] checking for pkg-config... /usr/bin/pkg-config [ 63s] checking pkg-config is at least version 0.9.0... yes [ 63s] checking for SYSTEMD... yes [ 63s] checking for LIBSYSTEMD_DAEMON... yes [ 63s] checking for GLIB_20... yes [ 63s] checking for LIBX11... yes [ 63s] checking for TTRACE... yes [ 63s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 63s] checking for grep that handles long lines and -e... /bin/grep [ 63s] checking for egrep... /bin/grep -E [ 63s] checking for ANSI C header files... yes [ 63s] checking for sys/types.h... yes [ 63s] checking for sys/stat.h... yes [ 63s] checking for stdlib.h... yes [ 63s] checking for string.h... yes [ 63s] checking for memory.h... yes [ 64s] checking for strings.h... yes [ 64s] checking for inttypes.h... yes [ 64s] checking for stdint.h... yes [ 64s] checking for unistd.h... yes [ 64s] checking fcntl.h usability... yes [ 64s] checking fcntl.h presence... yes [ 64s] checking for fcntl.h... yes [ 64s] checking for stdlib.h... (cached) yes [ 64s] checking for string.h... (cached) yes [ 64s] checking sys/ioctl.h usability... yes [ 64s] checking sys/ioctl.h presence... yes [ 64s] checking for sys/ioctl.h... yes [ 64s] checking for unistd.h... (cached) yes [ 64s] checking for pid_t... yes [ 64s] checking vfork.h usability... no [ 64s] checking vfork.h presence... no [ 64s] checking for vfork.h... no [ 64s] checking for fork... yes [ 64s] checking for vfork... yes [ 65s] checking for working fork... yes [ 65s] checking for working vfork... (cached) yes [ 65s] checking for clock_gettime... yes [ 65s] checking for memset... yes [ 65s] checking for strdup... yes [ 65s] configure: creating ./config.status [ 65s] config.status: creating Makefile [ 65s] config.status: creating xorg.service [ 65s] config.status: creating xorg.target [ 65s] config.status: creating config.h [ 65s] config.status: executing depfiles commands [ 65s] + make -j4 [ 65s] make all-am [ 65s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3' [ 65s] depbase=`echo src/main.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ [ 65s] armv7l-tizen-linux-gnueabi-gcc -DHAVE_CONFIG_H -I. -Wall -Wno-uninitialized -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT src/main.o -MD -MP -MF $depbase.Tpo -c -o src/main.o src/main.c &&\ [ 65s] mv -f $depbase.Tpo $depbase.Po [ 65s] src/main.c: In function 'main': [ 65s] src/main.c:135:7: warning: unused variable 'vt' [-Wunused-variable] [ 65s] char vt[80]; [ 65s] ^ [ 65s] src/main.c: At top level: [ 65s] src/main.c:53:12: warning: 'tty' defined but not used [-Wunused-variable] [ 65s] static int tty = 1; /* tty1 */ [ 65s] ^ [ 65s] armv7l-tizen-linux-gnueabi-gcc -Wall -Wno-uninitialized -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat-security -Wl,--as-needed -Wl,-O1 -Wl,--hash-style=gnu -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -lglib-2.0 -lX11 -o xorg-launch-helper src/main.o -lsystemd -lglib-2.0 -lX11 -lrt [ 65s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3' [ 65s] + exit 0 [ 65s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.GeWlEw [ 65s] + umask 022 [ 65s] + cd /home/abuild/rpmbuild/BUILD [ 65s] + cd xorg-launch-helper-4.0.3 [ 65s] + LANG=C [ 65s] + export LANG [ 65s] + unset DISPLAY [ 65s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm [ 65s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm [ 65s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/share/license [ 65s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/share/license/xorg-launch-helper [ 65s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm install [ 66s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3' [ 66s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/bin" [ 66s] /usr/bin/install -c xorg-launch-helper '/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/bin' [ 66s] test -z "/usr/lib/systemd/system" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system" [ 66s] /usr/bin/install -c -m 644 xorg.service xorg.target '/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system' [ 66s] /usr/bin/make install-data-hook [ 66s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3' [ 66s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system/basic.target.wants [ 66s] ln -sf ../xorg.service /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system/basic.target.wants/xorg.service [ 66s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3' [ 66s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3' [ 66s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/share/info/dir [ 66s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm -regex '.*\.la$' [ 66s] + xargs rm -f -- [ 66s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm -regex '.*\.a$' [ 66s] + xargs rm -f -- [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/etc/sysconfig [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system/ [ 66s] + install -m 644 /home/abuild/rpmbuild/SOURCES/xorg.conf /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/etc/sysconfig/xorg [ 66s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/xorg_done.service /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system/ [ 66s] + ln -sf ../xorg_done.service /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/lib/systemd/system/basic.target.wants [ 66s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.3 [ 66s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm/usr/bin/xorg-launch-helper [ 66s] 13 blocks [ 66s] + /usr/lib/rpm/check-buildroot [ 66s] + /usr/lib/rpm//brp-compress [ 66s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 66s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 66s] + /usr/lib/rpm/brp-python-hardlink [ 66s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm [ 66s] Processing files: xorg-launch-helper-4.0.3-1.1.armv7l [ 66s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 66s] cmVxdWVzdD4KIDxhc3NpZ24+CiAgICA8ZmlsZXN5c3RlbSBwYXRoPSIvdXNyL2Jp [ 66s] bi94b3JnLWxhdW5jaC1oZWxwZXIiIGxhYmVsPSJfIiBleGVjX2xhYmVsPSJub25l [ 66s] IiAvPgogPC9hc3NpZ24+CjwvbWFuaWZlc3Q+Cg== [ 66s] [ 66s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 66s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 librt.so.1 librt.so.1(GLIBC_2.4) libsystemd.so.0 libsystemd.so.0(LIBSYSTEMD_209) rtld(GNU_HASH) [ 66s] Processing files: xorg-launch-helper-debuginfo-4.0.3-1.1.armv7l [ 66s] Processing files: xorg-launch-helper-debugsource-4.0.3-1.1.armv7l [ 66s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm [ 66s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-launch-helper-4.0.3-1.1.src.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-4.0.3-1.1.armv7l.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debuginfo-4.0.3-1.1.armv7l.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debugsource-4.0.3-1.1.armv7l.rpm [ 66s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ElSDYh [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd xorg-launch-helper-4.0.3 [ 66s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.3-1.1.arm [ 66s] + exit 0 [ 66s] ... checking for files with abuild user/group [ 66s] ... creating baselibs [ 66s] ... saving built statistics [ 66s] ... saving built packages [ 66s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-4.0.3-1.1.armv7l.rpm [ 66s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debuginfo-4.0.3-1.1.armv7l.rpm [ 66s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debugsource-4.0.3-1.1.armv7l.rpm [ 66s] /home/abuild/rpmbuild/SRPMS/xorg-launch-helper-4.0.3-1.1.src.rpm [ 66s] /home/abuild/rpmbuild/OTHER/_statistics [ 66s] [ 66s] w28 finished "build xorg-launch-helper.spec" at Thu Oct 29 05:11:31 UTC 2015. [ 66s] [ 78s] /.build/build: line 368: 208 Killed background_monitor_process [ 80s] [ 73.234625] SysRq : Power Off [ 80s] [ 73.343693] Power down. [ 80s] build: extracting built packages... [ 81s] xorg-launch-helper-4.0.3-1.1.armv7l.rpm [ 81s] xorg-launch-helper-debuginfo-4.0.3-1.1.armv7l.rpm [ 81s] xorg-launch-helper-debugsource-4.0.3-1.1.armv7l.rpm [ 81s] xorg-launch-helper-4.0.3-1.1.src.rpm [ 81s] _statistics Retried build at Sun Mar 6 18:09:24 2016 returned same result, skipped Retried build at Mon May 30 15:08:27 2016 returned same result, skipped