Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_1 Using BUILD_ARCH=i586:i486:i386 w21 started "build eio.spec" at Sun Feb 17 13:39:06 UTC 2013. Building eio for project 'Tizen:2.0:Main:Emul' repository 'i586emul' arch 'i586' srcmd5 '8a39fa7e9561c0f48301b73dc391ebbc' processing specfile /srv/build/root_1/.build-srcdir/eio.spec ... running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/eio.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/eio.spec build rpmlint-Factory ... [1/30] preinstalling rpm... [2/30] preinstalling rpm-libs... [3/30] preinstalling setup... [4/30] preinstalling filesystem... [5/30] preinstalling bash... [6/30] preinstalling bzip2... [7/30] preinstalling coreutils... [8/30] preinstalling diffutils... [9/30] preinstalling liblua... [10/30] preinstalling eglibc... [11/30] preinstalling eglibc-common... [12/30] preinstalling libacl... [13/30] preinstalling libattr... [14/30] preinstalling libgcc... [15/30] preinstalling libcap... [16/30] preinstalling popt... [17/30] preinstalling readline... [18/30] preinstalling sed... [19/30] preinstalling tar... [20/30] preinstalling zlib... [21/30] preinstalling sqlite... [22/30] preinstalling ncurses-libs... [23/30] preinstalling elfutils-libelf... [24/30] preinstalling bzip2-libs... [25/30] preinstalling libstdc++... [26/30] preinstalling libfile... [27/30] preinstalling xz-libs... [28/30] preinstalling nss... [29/30] preinstalling nspr... [30/30] preinstalling nss-softokn-freebl... initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: nss-sysinit -> nss breaking dependency nss -> nss-sysinit cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/167] [2/167] installing cloog-0.15.9-2.3.emul [3/167] installing kernel-headers-2.6.36-1.2.emul [4/167] installing libX11-common-1.5.0-2.1.emul [5/167] installing tizen-release-2.0.0-2.2.emul [6/167] installing tzdata-2011h-2.2.emul [7/167] installing libgcc-4.5.3-2.4.emul [8/167] installing setup-0.1-2.2.emul [9/167] installing filesystem-0.1-2.2.emul warning: group lock does not exist - using root warning: group mail does not exist - using root [10/167] installing eglibc-2.13-2.19 [11/167] installing bzip2-libs-1.0.5-5.3.emul [12/167] installing cpio-2.8-4.2.emul [13/167] installing e2fsprogs-libs-1.41.11-2.8 [14/167] installing eina-1.7.1+svn.77445+build01r01-1.9.emul [15/167] installing elfutils-libelf-0.152-2.34 [16/167] installing expat-2.0.1-9.2.emul [17/167] installing findutils-4.2.31-2.2.emul [18/167] installing fribidi-0.19.5-5.1.emul [19/167] installing gdbm-1.8.3-5.1 [20/167] installing libICE-1.0.8-1.1.emul [21/167] installing libXau-1.0.7-1.1.emul [22/167] installing libattr-2.4.44-8.5.emul [23/167] installing libdrm2-2.4.35-11.1.emul [24/167] installing libffi-3.0.9-100.1.emul [25/167] installing libidn-1.15-6.2.emul [26/167] installing libjpeg-turbo-1.2.0-7.2.emul [27/167] installing liblua-5.1.4-7.2.emul [28/167] installing libuuid-2.20.2-5.2.emul [29/167] installing lzo-2.03-2.2.emul [30/167] installing m4-1.4.14-2.2.emul [31/167] installing make-3.81-1.2.emul [32/167] installing net-tools-1.60-89.4.emul [33/167] installing nspr-4.8.7-1.11 [34/167] installing nss-softokn-freebl-3.12.9-4.17 [35/167] installing patch-2.6.1.169-1.2.emul [36/167] installing pixman-0.26.0-8.1.emul [37/167] installing pkgconfig-0.25-3.3.emul [38/167] installing popt-1.16-4.2.emul [39/167] installing readline-5.2-13.1.emul [40/167] installing sed-4.1.5-2.3.emul [41/167] installing sqlite-3.7.13-1.1.emul [42/167] installing xz-libs-5.0.3-2.3.emul [43/167] installing zlib-1.2.5-3.22 [44/167] installing bash-4.1-4.2.emul [45/167] installing diffutils-3.0-3.3.emul [46/167] installing libgomp-4.5.3-2.4.emul [47/167] installing libstdc++-4.5.3-2.4.emul [48/167] installing eglibc-common-2.13-2.19 [49/167] installing ncurses-libs-5.7-6.2.emul [50/167] installing build-compare-2009.10.14-27.11 [51/167] installing libstdc++-devel-4.5.3-2.4.emul [52/167] installing c-ares-1.7.4-1.2 [53/167] installing eglibc-headers-2.13-2.19 [54/167] installing eina-devel-1.7.1+svn.77445+build01r01-1.9.emul [55/167] installing freetype-2.4.9-2.1.emul [56/167] installing fribidi-devel-0.19.5-5.1.emul [57/167] installing libacl-2.2.49-2.2.emul [58/167] installing libcap-2.21-2.2.emul [59/167] installing libfile-5.04-2.3.emul [60/167] installing libpci3-3.0.0-1.1.emul [61/167] installing libpng-1.2.50-1.1.emul [62/167] installing libwsbm-1.1.0-1.1.emul [63/167] installing libxcb-1.8.1-1.1.emul [64/167] installing lzo-minilzo-2.03-2.2.emul [65/167] installing ncurses-5.7-6.2.emul [66/167] installing openssl-1.0.1c-2.32 [67/167] installing pixman-devel-0.26.0-8.1.emul [68/167] installing unzip-6.0-10.4.emul [69/167] installing zlib-devel-1.2.5-3.22 [70/167] installing bzip2-1.0.5-5.3.emul [71/167] installing glib2-2.32.3-5.1.emul [72/167] installing gmp-5.0.1-2.2.emul [73/167] installing libSM-1.2.1-1.1.emul [74/167] installing libblkid-2.20.2-5.2.emul [75/167] installing libpcre-7.9-2.3.emul [76/167] installing xz-5.0.3-2.3.emul [77/167] installing binutils-2.21.51.20110421-5.3.emul [78/167] installing eet-1.7.1+svn.77495+build01r01-1.1.emul [79/167] installing libicu-4.8-1.9.emul [80/167] installing elfutils-libs-0.152-2.34 [81/167] installing nss-3.12.9-4.17 [82/167] installing perl-5.12.1-64.2.emul [83/167] installing ncurses-base-5.7-6.2.emul [84/167] installing perl-HTML-Tagset-3.20-9.2.emul [85/167] installing perl-IO-Compress-Base-2.008-64.2.emul [86/167] installing perl-Module-Pluggable-3.60-64.2.emul [87/167] installing perl-Pod-Escapes-1.04-64.2.emul [88/167] installing perl-TimeDate-1.20-2.2.emul [89/167] installing eglibc-devel-2.13-2.19 [90/167] installing grep-2.5.1a-63.3.emul [91/167] installing mpfr-3.0.0-2.2.emul [92/167] installing perl-Compress-Raw-Zlib-2.008-64.2.emul [93/167] installing perl-libs-5.12.1-64.2.emul [94/167] installing tar-1.17-3.3.emul [95/167] installing coreutils-6.9-10.2.emul [96/167] installing ecore-1.7.1+svn.77580+build01r01-2.1.emul [97/167] installing eet-tools-1.7.1+svn.77495+build01r01-1.1.emul [98/167] installing file-5.04-2.3.emul [99/167] installing libmount-2.20.2-5.2.emul [100/167] installing lzo-devel-2.03-2.2.emul [101/167] installing pciutils-3.0.0-1.1.emul [102/167] installing perl-devel-5.12.1-64.2.emul [103/167] installing xz-lzma-compat-5.0.3-2.3.emul [104/167] installing eet-devel-1.7.1+svn.77495+build01r01-1.1.emul [105/167] installing freetype-devel-2.4.9-2.1.emul [106/167] installing libX11-1.5.0-2.1.emul [107/167] installing nss-sysinit-3.12.9-4.17 [108/167] installing ppl-0.10.2-11.2.emul [109/167] installing elfutils-0.152-2.34 [110/167] installing libcurl-7.21.3-7.4.emul [111/167] installing libXcomposite-0.4.3-3.1.emul [112/167] installing libXext-1.3.1-1.1.emul [113/167] installing libXfixes-5.0-2.1.emul [114/167] installing libXrender-0.9.7-1.1.emul [115/167] installing perl-ExtUtils-ParseXS-2.18-64.2.emul [116/167] installing perl-Pod-Simple-3.07-64.2.emul [117/167] installing perl-Test-Simple-0.80-64.2.emul [118/167] installing gawk-3.1.5-3.3.emul [119/167] installing gzip-1.3.14-2.3.emul [120/167] installing libidn-devel-1.15-6.2.emul [121/167] installing mpc-0.9-2.2.emul [122/167] installing perl-IO-Compress-Zlib-2.008-64.2.emul [123/167] installing perl-Test-Harness-3.12-64.2.emul [124/167] installing pvr-bin-mdfld-1.7.17.296760.7-1.1.emul [125/167] installing cloog-ppl-0.15.9-2.3.emul [126/167] installing ecore-imf-1.7.1+svn.77580+build01r01-2.1.emul [127/167] installing ecore-input-1.7.1+svn.77580+build01r01-2.1.emul [128/167] installing giflib-4.1.6-13.1.emul [129/167] installing build-2011.01.10a-2.2.emul [130/167] installing curl-7.21.3-7.4.emul [131/167] installing ecore-con-1.7.1+svn.77580+build01r01-2.1.emul [132/167] installing fontconfig-2.9.0-2.1.emul [133/167] installing util-linux-2.20.2-5.2.emul warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [134/167] installing glib2-devel-2.32.3-5.1.emul [135/167] installing fontconfig-devel-2.9.0-2.1.emul [136/167] installing libXdamage-1.1.3-3.1.emul [137/167] installing libXgesture-0.1.0-3.1.emul [138/167] installing libXi-1.6.1-1.1.emul [139/167] installing libXinerama-1.1.2-1.1.emul [140/167] installing perl-ExtUtils-MakeMaker-6.36-64.2.emul [141/167] installing libXcursor-1.1.13-1.1.emul [142/167] installing libXrandr-1.4.0-3.1.emul [143/167] installing libcurl-devel-7.21.3-7.4.emul [144/167] installing ecore-fb-1.7.1+svn.77580+build01r01-2.1.emul [145/167] installing ecore-file-1.7.1+svn.77580+build01r01-2.1.emul [146/167] installing ecore-ipc-1.7.1+svn.77580+build01r01-2.1.emul [147/167] installing cpp-4.5.3-2.4.emul [148/167] installing cairo-1.12.8-2.1.emul [149/167] installing rpm-4.9.1-5.2.emul [150/167] installing perl-CPAN-1.9205-64.2.emul [151/167] installing libXtst-1.2.0-3.1.emul [152/167] installing autoconf-2.68-2.2.emul [153/167] installing harfbuzz-0.9.7-1.1.emul [154/167] installing rpm-libs-4.9.1-5.2.emul [155/167] installing gcc-4.5.3-2.4.emul [156/167] installing harfbuzz-devel-0.9.7-1.1.emul [157/167] installing automake-1.11.1-4.2.emul [158/167] installing gcc-c++-4.5.3-2.4.emul [159/167] installing evas-1.7.1+svn.77561+build01r01-1.1.emul [160/167] installing ecore-x-1.7.1+svn.77580+build01r01-2.1.emul [161/167] installing rpm-build-4.9.1-5.2.emul [162/167] installing libtool-2.2.6b-2.2.emul [163/167] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-2.1.emul [164/167] installing ecore-input-evas-1.7.1+svn.77580+build01r01-2.1.emul [165/167] installing evas-devel-1.7.1+svn.77561+build01r01-1.1.emul [166/167] installing ecore-evas-1.7.1+svn.77580+build01r01-2.1.emul [167/167] installing ecore-devel-1.7.1+svn.77580+build01r01-2.1.emul now finalizing build dir... /var/run/obs/worker/1/build/build: line 1761: /srv/build/root_1/etc/passwd: No such file or directory ----------------------------------------------------------------- I have the following modifications for eio.spec: 7c7 < Release: 1 --- > Release: 1.1.emul ----------------------------------------------------------------- ----- building eio.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.tizen.org/Tizen:2.0:Main:Emul/i586emul/8a39fa7e9561c0f48301b73dc391ebbc-eio' /home/abuild/rpmbuild/SOURCES/eio.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.KiFKSz + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf eio-1.7.1+svn.77392+build01r01 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/eio-1.7.1+svn.77392+build01r01.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd eio-1.7.1+svn.77392+build01r01 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.88atGb + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd eio-1.7.1+svn.77392+build01r01 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + export 'CFLAGS+= -fPIC -Wall' + CFLAGS+=' -fPIC -Wall' + export 'LDFLAGS+= -Wl,--hash-style=both -Wl,--as-needed' + LDFLAGS+=' -Wl,--hash-style=both -Wl,--as-needed' + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + ./autogen.sh --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info Running aclocal... sh: svnversion: command not found Running autoheader... sh: svnversion: command not found Running autoconf... Running libtoolize... Running automake... configure.ac:159: installing `./compile' configure.ac:42: installing `./config.guess' configure.ac:42: installing `./config.sub' configure.ac:36: installing `./install-sh' configure.ac:36: installing `./missing' doc/Makefile.am:32: wildcard $(srcdir: non-POSIX variable name doc/Makefile.am:32: (probably a GNU make extension) src/examples/Makefile.am: installing `./depcomp' cmp: config.cache-env: No such file or directory Cleaning configure cache... configure: creating cache config.cache checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for i686-pc-linux-gnu-objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for i686-pc-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking for i686-pc-linux-gnu-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking whether to build documentation... yes checking for doxygen... no WARNING: The doxygen program was not found in your execute path. You may have doxygen installed somewhere not covered by your path. If this is the case make sure you have the packages installed, AND that the doxygen program is in your execute path (see your shell manual page on setting the $PATH environment variable), OR alternatively, specify the program to use with --with-doxygen. configure: WARNING: no doxygen detected. Documentation will not be built checking for EIO... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking whether time.h and sys/time.h may both be included... yes checking for unistd.h... (cached) yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking features.h usability... yes checking features.h presence... yes checking for features.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking whether to build POSIX threads code... auto checking whether to build Windows threads code... no checking whether system support POSIX threads... yes checking for PATH_MAX in limits.h... yes checking whether byte ordering is bigendian... no checking for inline... inline checking for __attribute__... yes checking whether gcc and cc understand -c and -o together... yes checking for fchmod... yes checking for chown... yes checking for getpwnam... yes checking for getgrnam... yes checking whether to use splice for file copy... yes checking whether lstat is available... yes checking for extended attributes... yes checking whether inotify is to be used for filemonitoring... yes checking for inotify_init in -lc... yes checking whether Windows notification is to be used for filemonitoring... no checking whether examples are built... no checking whether examples are installed... no configure: updating cache config.cache configure: creating ./config.status config.status: creating eio.pc config.status: creating eio.spec config.status: creating Makefile config.status: creating doc/Makefile config.status: creating doc/eio.dox config.status: creating doc/Doxyfile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/examples/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands ------------------------------------------------------------------------ eio 1.7.99.0 ------------------------------------------------------------------------ Configuration Options Summary: Thread Support.......: POSIX Inotify..............: yes Windows notification.: no Documentation........: no Examples...............: no Examples installed.....: no Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for i686-pc-linux-gnu-objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for i686-pc-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking for i686-pc-linux-gnu-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking whether to build documentation... yes checking for doxygen... no WARNING: The doxygen program was not found in your execute path. You may have doxygen installed somewhere not covered by your path. If this is the case make sure you have the packages installed, AND that the doxygen program is in your execute path (see your shell manual page on setting the $PATH environment variable), OR alternatively, specify the program to use with --with-doxygen. configure: WARNING: no doxygen detected. Documentation will not be built checking for EIO... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking whether time.h and sys/time.h may both be included... yes checking for unistd.h... (cached) yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking features.h usability... yes checking features.h presence... yes checking for features.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking whether to build POSIX threads code... auto checking whether to build Windows threads code... no checking whether system support POSIX threads... yes checking for PATH_MAX in limits.h... yes checking whether byte ordering is bigendian... no checking for inline... inline checking for __attribute__... yes checking whether gcc and cc understand -c and -o together... yes checking for fchmod... yes checking for chown... yes checking for getpwnam... yes checking for getgrnam... yes checking whether to use splice for file copy... yes checking whether lstat is available... yes checking for extended attributes... yes checking whether inotify is to be used for filemonitoring... yes checking for inotify_init in -lc... yes checking whether Windows notification is to be used for filemonitoring... no checking whether examples are built... no checking whether examples are installed... no configure: creating ./config.status config.status: creating eio.pc config.status: creating eio.spec config.status: creating Makefile config.status: creating doc/Makefile config.status: creating doc/eio.dox config.status: creating doc/Doxyfile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/examples/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands ------------------------------------------------------------------------ eio 1.7.99.0 ------------------------------------------------------------------------ Configuration Options Summary: Thread Support.......: POSIX Inotify..............: yes Windows notification.: no Documentation........: no Examples...............: no Examples installed.....: no Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -Wall LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr + make -j4 make all-recursive make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' Making all in src make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' Making all in lib make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/lib' CC eio_dir.lo CC eio_eet.lo CC eio_file.lo CC eio_main.lo CC eio_map.lo CC eio_monitor.lo CC eio_monitor_poll.lo CC eio_single.lo CC eio_xattr.lo CC eio_monitor_inotify.lo CCLD libeio.la make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/lib' Making all in examples make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/examples' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/examples' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' Making all in doc make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/doc' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/doc' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ePBIcC + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd eio-1.7.1+svn.77392+build01r01 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 + mkdir -p /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 + rm -rf /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 install Making install in src make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' Making install in lib make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/lib' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/lib' test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib" /bin/sh ../../libtool --mode=install /usr/bin/install -c libeio.la '/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib' libtool: install: /usr/bin/install -c .libs/libeio.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/libeio.so.1.7.99 libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib && { ln -s -f libeio.so.1.7.99 libeio.so.1 || { rm -f libeio.so.1 && ln -s libeio.so.1.7.99 libeio.so.1; }; }) libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib && { ln -s -f libeio.so.1.7.99 libeio.so || { rm -f libeio.so && ln -s libeio.so.1.7.99 libeio.so; }; }) libtool: install: /usr/bin/install -c .libs/libeio.lai /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/libeio.la libtool: install: /usr/bin/install -c .libs/libeio.a /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/libeio.a libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/libeio.a libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/libeio.a libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/include/eio-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/include/eio-1" /usr/bin/install -c -m 644 Eio.h eio_inline_helper.x '/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/include/eio-1' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/lib' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/lib' Making install in examples make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/examples' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/examples' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/share/eio/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/share/eio/examples" test -z "/usr/share/eio/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/share/eio/examples" make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/examples' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src/examples' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/src' Making install in doc make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/doc' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/doc' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/doc' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01/doc' make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/pkgconfig" /usr/bin/install -c -m 644 eio.pc '/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/pkgconfig' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01' + rm -f /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build01r01 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386/usr/lib/libeio.so.1.7.99 symlinked /usr/lib/debug/usr/lib/libeio.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeio.so.1.debug symlinked /usr/lib/debug/usr/lib/libeio.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeio.so.debug 389 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 Processing files: eio-1.7.1+svn.77392+build01r01-1.1.emul.i586 Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libeio.so.1 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.5) libecore.so.1 libeet.so.1 libeina.so.1 libeio.so.1 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.2) Processing files: eio-devel-1.7.1+svn.77392+build01r01-1.1.emul.i586 Provides: pkgconfig(eio) = 1.7.99.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libeio.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(eet) >= 1.6.99 pkgconfig(eina) >= 1.6.99 Processing files: eio-debuginfo-1.7.1+svn.77392+build01r01-1.1.emul.i586 Processing files: eio-debugsource-1.7.1+svn.77392+build01r01-1.1.emul.i586 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 Wrote: /home/abuild/rpmbuild/SRPMS/eio-1.7.1+svn.77392+build01r01-1.1.emul.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/eio-1.7.1+svn.77392+build01r01-1.1.emul.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/eio-devel-1.7.1+svn.77392+build01r01-1.1.emul.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/eio-debuginfo-1.7.1+svn.77392+build01r01-1.1.emul.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/eio-debugsource-1.7.1+svn.77392+build01r01-1.1.emul.i586.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.2UJoal + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd eio-1.7.1+svn.77392+build01r01 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build01r01-1.1.emul.i386 + exit 0 ... checking for files with abuild user/group ... creating baselibs w21 finished "build eio.spec" at Sun Feb 17 13:39:40 UTC 2013. Retried build at Sun Feb 17 22:21:58 2013 returned same result, skipped