Memory limit set to 110504152KB
Using BUILD_ROOT=/srv/build/root_1
Using BUILD_ARCH=armv7el


w19 started "build boot-animation.spec" at Sat Feb 16 10:30:48 UTC 2013.

Building boot-animation for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 'd1a2e5f3ff23180f906d47bba4887141'

processing specfile /srv/build/root_1/.build-srcdir/boot-animation.spec ...
running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/boot-animation.spec
init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/boot-animation.spec build rpmlint-Factory ...
copying qemu
 /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh

Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason
[1/55] preinstalling nss...
[2/55] preinstalling libfile-x86-arm...
[3/55] preinstalling elfutils-libelf-x86-arm...
[4/55] preinstalling nss-softokn-freebl-x86-arm...
[5/55] preinstalling nss-x86-arm...
[6/55] preinstalling nspr-x86-arm...
[7/55] preinstalling libgcc-x86-arm...
[8/55] preinstalling libacl-x86-arm...
[9/55] preinstalling libattr-x86-arm...
[10/55] preinstalling libcap-x86-arm...
[11/55] preinstalling liblua-x86-arm...
[12/55] preinstalling popt-x86-arm...
[13/55] preinstalling xz-libs-x86-arm...
[14/55] preinstalling zlib-x86-arm...
[15/55] preinstalling file...
[16/55] preinstalling sqlite-x86-arm...
[17/55] preinstalling mpfr-x86-arm...
[18/55] preinstalling gmp-x86-arm...
[19/55] preinstalling mpc-x86-arm...
[20/55] preinstalling bzip2-libs-x86-arm...
[21/55] preinstalling rpm-x86-arm...
[22/55] preinstalling rpm-libs-x86-arm...
[23/55] preinstalling tizen-accelerator...
[24/55] preinstalling eglibc-x86-arm...
[25/55] preinstalling ncurses-libs-x86-arm...
[26/55] preinstalling bash-x86-arm...
[27/55] preinstalling rpm...
[28/55] preinstalling rpm-libs...
[29/55] preinstalling setup...
[30/55] preinstalling filesystem...
[31/55] preinstalling bash...
[32/55] preinstalling bzip2...
[33/55] preinstalling coreutils...
[34/55] preinstalling diffutils...
[35/55] preinstalling liblua...
[36/55] preinstalling eglibc...
[37/55] preinstalling eglibc-common...
[38/55] preinstalling libacl...
[39/55] preinstalling libattr...
[40/55] preinstalling libgcc...
[41/55] preinstalling libcap...
[42/55] preinstalling popt...
[43/55] preinstalling readline...
[44/55] preinstalling sed...
[45/55] preinstalling tar...
[46/55] preinstalling zlib...
[47/55] preinstalling sqlite...
[48/55] preinstalling ncurses-libs...
[49/55] preinstalling elfutils-libelf...
[50/55] preinstalling bzip2-libs...
[51/55] preinstalling libstdc++...
[52/55] preinstalling libfile...
[53/55] preinstalling xz-libs...
[54/55] preinstalling nspr...
[55/55] preinstalling nss-softokn-freebl...
running rpm-x86-arm postinstall script
running rpm-libs-x86-arm postinstall script
running tizen-accelerator postinstall script
running bash-x86-arm postinstall script
initializing rpm db...
reordering...cycle: bash -> eglibc -> eglibc-common
  breaking dependency eglibc-common -> bash
cycle: eglibc -> eglibc-common
  breaking dependency eglibc-common -> eglibc
cycle: eglibc -> eglibc-common -> libgcc
  breaking dependency eglibc -> eglibc-common
cycle: eglibc -> libgcc
  breaking dependency libgcc -> eglibc
cycle: dbus-libs -> dbus
  breaking dependency dbus -> dbus-libs
cycle: systemd -> libudev -> udev
  breaking dependency systemd -> libudev
cycle: pkgmgr-info -> pkgmgr-info-parser
  breaking dependency pkgmgr-info-parser -> pkgmgr-info
cycle: filesystem -> setup
  breaking dependency setup -> filesystem
cycle: ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses
cycle: ncurses-base -> ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses-base
cycle: perl -> perl-libs
  breaking dependency perl -> perl-libs
cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel
  breaking dependency perl -> perl-ExtUtils-MakeMaker
cycle: perl -> perl-IO-Compress-Zlib
  breaking dependency perl -> perl-IO-Compress-Zlib
cycle: perl -> perl-IO-Compress-Base
  breaking dependency perl -> perl-IO-Compress-Base
cycle: perl -> perl-Module-Pluggable
  breaking dependency perl -> perl-Module-Pluggable
cycle: perl -> perl-Pod-Simple
  breaking dependency perl -> perl-Pod-Simple
cycle: perl-devel -> perl-ExtUtils-MakeMaker
  breaking dependency perl-devel -> perl-ExtUtils-MakeMaker
cycle: perl-ExtUtils-ParseXS -> perl-devel
  breaking dependency perl-devel -> perl-ExtUtils-ParseXS
cycle: nss -> nss-sysinit
  breaking dependency nss -> nss-sysinit
cycle: perl-CPAN -> perl-Test-Harness
  breaking dependency perl-Test-Harness -> perl-CPAN
cycle: pulseaudio-libs -> pulseaudio
  breaking dependency pulseaudio -> pulseaudio-libs
cycle: rpm-libs -> rpm
  breaking dependency rpm -> rpm-libs
done
[1/302] [2/302] installing kernel-headers-2.6.36-1.1
[3/302] installing libX11-common-1.5.0-2.1
[4/302] installing opengl-es-virtual-drv-0.1.3-10.1
[5/302] installing tizen-release-2.0.0-1.1
[6/302] installing tzdata-2011h-1.1
[7/302] installing libgcc-4.5.3-1.3
[8/302] installing setup-0.1-1.1
[9/302] installing filesystem-0.1-1.1
warning: group lock does not exist - using root
warning: group mail does not exist - using root
[10/302] installing eglibc-2.13-1.8
[11/302] installing eglibc-common-2.13-1.8
warning: %post(eglibc-common-2.13-1.8.armv7l) scriptlet failed, exit status 255
[12/302] installing iniparser-2.17-3.1
[13/302] installing alsa-scenario-0.2.1-13.1
[14/302] installing bash-4.1-3.1
[15/302] installing bzip2-libs-1.0.5-4.2
[16/302] installing cpio-2.8-3.1
[17/302] installing diffutils-3.0-3.1
[18/302] installing e2fsprogs-libs-1.41.9-2.2
[19/302] installing eina-1.7.1+svn.77445+build01r01-1.2
[20/302] installing elfutils-libelf-0.152-1.8
[21/302] installing expat-2.0.1-8.2
[22/302] installing fdupes-1.40-42.1
[23/302] installing findutils-4.2.31-1.1
[24/302] installing fribidi-0.19.5-5.1
[25/302] installing gdbm-1.8.3-2.1
[26/302] installing kmod-5-2.1
[27/302] installing libICE-1.0.8-1.1
[28/302] installing libXau-1.0.7-1.1
[29/302] installing libasound-1.0.24.1-1.1
[30/302] installing libattr-2.4.44-7.4
[31/302] installing libdrm2-2.4.35-11.1
[32/302] installing libexif-0.6.21-4.1
[33/302] installing libffi-3.0.9-100.1
[34/302] installing libgomp-4.5.3-1.3
[35/302] installing libidn-1.15-1.2
[36/302] installing libiri-1.1-1.1
[37/302] installing libjpeg-turbo-1.2.0-7.1
[38/302] installing liblua-5.1.4-6.2
[39/302] installing libogg-1.2.1-3.1
[40/302] installing libslp-pm-1.2.5-1.1
[41/302] installing libstdc++-4.5.3-1.3
[42/302] installing libtool-ltdl-2.2.6b-1.2
[43/302] installing libuuid-2.20.2-1.1
[44/302] installing lzo-2.03-1.1
[45/302] installing m4-1.4.14-1.1
[46/302] installing net-tools-1.60-88.1
[47/302] installing nspr-4.9-1.5
[48/302] installing nss-softokn-freebl-3.12.9-5.9
[49/302] installing patch-2.6-1.1
[50/302] installing pixman-0.26.0-8.1
[51/302] installing pkgconfig-0.25-2.2
[52/302] installing popt-1.16-3.2
[53/302] installing readline-5.2-13.1
[54/302] installing sed-4.1.5-2.1
[55/302] installing smack-1.0slp2+s7-1.2
[56/302] installing speex-1.2rc1-3.1
[57/302] installing sqlite-3.7.13-1.1
[58/302] installing xz-libs-5.0.3-1.2
[59/302] installing zlib-1.2.5-2.8
[60/302] installing ncurses-libs-5.7-4.2
[61/302] installing build-compare-2009.10.14-26.2
[62/302] installing libpthread-stubs-0.3-2.1
[63/302] installing libstdc++-devel-4.5.3-1.3
[64/302] installing vconf-internal-keys-devel-0.0.66-1.1
[65/302] installing xorg-x11-proto-core-7.0.23-2.1
[66/302] installing xorg-x11-proto-kb-1.0.6-2.1
[67/302] installing eglibc-headers-2.13-1.8
[68/302] installing eina-devel-1.7.1+svn.77445+build01r01-1.2
[69/302] installing fribidi-devel-0.19.5-5.1
[70/302] installing libasound-devel-1.0.24.1-1.1
[71/302] installing libcap-2.21-1.2
[72/302] installing libexif-devel-0.6.21-4.1
[73/302] installing liblua-devel-5.1.4-6.2
[74/302] installing pixman-devel-0.26.0-8.1
[75/302] installing unzip-6.0-9.3
[76/302] installing zlib-devel-1.2.5-2.8
[77/302] installing c-ares-1.7.4-1.2
[78/302] installing embryo-1.7.1+svn.76491+build01r01-1.1
[79/302] installing freetype-2.4.9-2.1
[80/302] installing gmp-5.0.1-1.2
[81/302] installing libacl-2.2.49-1.2
[82/302] installing libdlog-0.4.1-3.1
[83/302] installing libdrm-slp1-2.4.35-11.1
[84/302] installing libfile-5.04-1.2
[85/302] installing libpcre-7.9-1.3
[86/302] installing libpng-1.2.50-1.1
[87/302] installing libsndfile-1.0.25-1.1
[88/302] installing libtheora-1.1.1-4.1
[89/302] installing libvorbis-1.2.3-3.1
[90/302] installing libxcb-1.8.1-1.1
[91/302] installing libxml2-2.7.8-8.3
[92/302] installing lzo-minilzo-2.03-1.1
[93/302] installing make-3.82-152.2
[94/302] installing ncurses-5.7-4.2
[95/302] installing openssl-1.0.1c-1.9
[96/302] installing binutils-2.22-1.2
[97/302] installing bzip2-1.0.5-4.2
[98/302] installing glib2-2.32.3-5.1
[99/302] installing libSM-1.2.1-1.1
[100/302] installing libblkid-2.20.2-1.1
[101/302] installing libicu-4.8-1.1
[102/302] installing libprivilege-control-0.0.19-1.1
ln: creating symbolic link `/lib/udev/rules.d/95-permissions-slp.rules': No such file or directory
warning: %post(libprivilege-control-0.0.19-1.1.armv7l) scriptlet failed, exit status 1
[103/302] installing xz-5.0.3-1.2
[104/302] installing eet-1.7.1+svn.77495+build01r01-1.1
[105/302] installing elfutils-libs-0.152-1.8
[106/302] installing nss-3.12.9-5.9
[107/302] installing perl-5.12.1-61.3
[108/302] installing ncurses-base-5.7-4.2
[109/302] installing perl-HTML-Tagset-3.20-8.1
[110/302] installing perl-IO-Compress-Base-2.008-61.3
[111/302] installing perl-Module-Pluggable-3.60-61.3
[112/302] installing perl-Pod-Escapes-1.04-61.3
[113/302] installing perl-TimeDate-1.20-1.1
[114/302] installing eglibc-devel-2.13-1.8
[115/302] installing embryo-devel-1.7.1+svn.76491+build01r01-1.1
[116/302] installing libdlog-devel-0.4.1-3.1
[117/302] installing alsa-scenario-devel-0.2.1-13.1
[118/302] installing grep-2.5.1a-63.1
[119/302] installing libXau-devel-1.0.7-1.1
[120/302] installing lzo-devel-2.03-1.1
[121/302] installing mpfr-3.0.0-1.2
[122/302] installing perl-Compress-Raw-Zlib-2.008-61.3
[123/302] installing perl-devel-5.12.1-61.3
[124/302] installing perl-libs-5.12.1-61.3
[125/302] installing tar-1.17-3.2
[126/302] installing bundle-0.1.27-1.2
[127/302] installing coreutils-6.9-9.4
[128/302] installing ecore-1.7.1+svn.77580+build01r01-2.2
[129/302] installing eet-devel-1.7.1+svn.77495+build01r01-1.1
[130/302] installing file-5.04-1.2
[131/302] installing freetype-devel-2.4.9-2.1
[132/302] installing gstreamer-0.10.36-5.2
[133/302] installing libX11-1.5.0-2.1
[134/302] installing libmm-common-0.2.53-1.1
[135/302] installing libmount-2.20.2-1.1
[136/302] installing libsf-common-0.3.18-1.1
[137/302] installing xz-lzma-compat-5.0.3-1.2
[138/302] installing app-checker-0.0.16-1.2
[139/302] installing elfutils-0.152-1.8
[140/302] installing heynoti-0.0.2-39.2
[141/302] installing nss-sysinit-3.12.9-5.9
[142/302] installing libcurl-7.21.3-1.2
[143/302] installing libsoup2.4-2.38.1_0.1.1-1.1
[144/302] installing libslp-db-util-0.1.1-4.2
[145/302] installing libarchive-2.8.3-1.1
[146/302] installing libmm-log-devel-0.1.5-6.1
[147/302] installing perl-ExtUtils-ParseXS-2.18-61.3
[148/302] installing perl-Pod-Simple-3.07-61.3
[149/302] installing perl-Test-Simple-0.80-61.3
[150/302] installing tizen-accelerator-1.0.1-1.1
[151/302] installing libXcomposite-0.4.3-3.1
[152/302] installing libXext-1.3.1-1.1
[153/302] installing libXfixes-5.0-2.1
[154/302] installing libXrender-0.9.7-1.1
[155/302] installing libidn-devel-1.15-1.2
[156/302] installing perl-IO-Compress-Zlib-2.008-61.3
[157/302] installing perl-Test-Harness-3.12-61.3
[158/302] installing gawk-3.1.5-2.1
[159/302] installing gzip-1.3.14-2.1
[160/302] installing libxcb-devel-1.8.1-1.1
[161/302] installing mpc-0.9-1.1
[162/302] installing pam-1.1.5-2.1
[163/302] installing xdgmime-0.0.12-2.1
chown: `root:root': invalid user
[164/302] installing app-checker-server-0.0.16-1.2
[165/302] installing build-2011.01.10a-1.1
[166/302] installing ecore-imf-1.7.1+svn.77580+build01r01-2.2
[167/302] installing ecore-input-1.7.1+svn.77580+build01r01-2.2
[168/302] installing giflib-4.1.6-13.1
[169/302] installing curl-7.21.3-1.2
[170/302] installing dbus-1.6.4-4.1
warning: group dbus does not exist - using root
[171/302] installing ecore-con-1.7.1+svn.77580+build01r01-2.2
[172/302] installing util-linux-2.20.2-1.1
warning: group tty does not exist - using root
/bin/chown: `root:root': invalid user
[173/302] installing app2sd-0.5-8.2
[174/302] installing fontconfig-2.9.0-2.1
[175/302] installing librua-0.1.0-34.1
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.rua.db': No such file or directory
chown: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory
chmod: cannot access `/opt/dbspace/.rua.db': No such file or directory
chmod: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory
/var/tmp/rpm-tmp.aT6bTU: line 9: chsmack: command not found
/var/tmp/rpm-tmp.aT6bTU: line 10: chsmack: command not found
warning: %post(librua-0.1.0-34.1.armv7l) scriptlet failed, exit status 127
[176/302] installing cmake-2.8.5-1.1
[177/302] installing glib2-devel-2.32.3-5.1
[178/302] installing bzip2-libs-x86-arm-1.0.5-8.1
[179/302] installing dbus-libs-1.6.4-4.1
[180/302] installing eglibc-x86-arm-2.13-8.2
[181/302] installing elfutils-libelf-x86-arm-0.152-8.1
[182/302] installing elfutils-libs-x86-arm-0.152-8.2
[183/302] installing fontconfig-devel-2.9.0-2.1
[184/302] installing gmp-x86-arm-5.0.1-8.1
[185/302] installing libacl-x86-arm-2.2.49-8.1
[186/302] installing libattr-x86-arm-2.4.44-8.1
[187/302] installing libcap-x86-arm-2.21-8.1
[188/302] installing libfile-x86-arm-5.04-8.1
[189/302] installing libgcc-x86-arm-4.5.3-8.1
[190/302] installing liblua-x86-arm-5.1.4-8.1
[191/302] installing mpc-x86-arm-0.9-8.1
[192/302] installing mpfr-x86-arm-3.0.0-9.1
[193/302] installing ncurses-libs-x86-arm-5.7-8.1
[194/302] installing nspr-x86-arm-4.9-8.2
[195/302] installing nss-softokn-freebl-x86-arm-3.12.9-8.1
[196/302] installing nss-x86-arm-3.12.9-8.1
[197/302] installing perl-ExtUtils-MakeMaker-6.36-61.3
[198/302] installing popt-x86-arm-1.16-8.1
[199/302] installing sqlite-x86-arm-3.7.9-8.1
[200/302] installing xz-libs-x86-arm-5.0.3-8.1
[201/302] installing zlib-x86-arm-1.2.5-8.1
[202/302] installing libXdamage-1.1.3-3.1
[203/302] installing libXgesture-0.1.0-3.1
[204/302] installing libXi-1.6.1-1.1
[205/302] installing libXinerama-1.1.2-1.1
[206/302] installing libXv-1.0.7-1.1
[207/302] installing libcurl-devel-7.21.3-1.2
[208/302] installing libdri2-0.1.0-11.1
[209/302] installing libmm-common-devel-0.2.53-1.1
[210/302] installing libX11-devel-1.5.0-2.1
[211/302] installing libXcursor-1.1.13-1.1
[212/302] installing libXrandr-1.4.0-3.1
[213/302] installing ecore-fb-1.7.1+svn.77580+build01r01-2.2
[214/302] installing cpp-4.5.3-1.3
[215/302] installing ecore-file-1.7.1+svn.77580+build01r01-2.2
[216/302] installing ecore-ipc-1.7.1+svn.77580+build01r01-2.2
[217/302] installing cairo-1.12.8-2.2
[218/302] installing rpm-4.9.1-4.2
[219/302] installing dbus-devel-1.6.4-4.1
[220/302] installing perl-CPAN-1.9205-61.3
[221/302] installing bash-x86-arm-4.1-8.1
[222/302] installing dbus-glib-0.100-4.2
[223/302] installing fdupes-x86-arm-1.40-8.1
[224/302] installing findutils-x86-arm-4.2.31-8.1
[225/302] installing gawk-x86-arm-3.1.5-8.2
[226/302] installing gzip-x86-arm-1.3.14-8.1
[227/302] installing make-x86-arm-3.82-8.1
[228/302] installing sed-x86-arm-4.1.5-8.1
[229/302] installing diffutils-x86-arm-3.0-8.1
[230/302] installing libXtst-1.2.0-3.1
[231/302] installing patch-x86-arm-2.6-8.1
[232/302] installing autoconf-2.68-1.1
[233/302] installing coreutils-x86-arm-6.9-8.1
[234/302] installing efreet-1.7.1+svn.77412+build01r01-2.1
[235/302] installing file-x86-arm-5.04-8.1
[236/302] installing tar-x86-arm-1.17-8.1
[237/302] installing harfbuzz-0.9.7-1.2
[238/302] installing pango-1.26.1-5.2

(pango-querymodules:7369): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
[239/302] installing elfutils-x86-arm-0.152-8.2
[240/302] installing systemd-43-1.1
[241/302] installing libslp-utilx-0.1.16-1.1
[242/302] installing gcc-4.5.3-1.3
[243/302] installing rpm-libs-4.9.1-4.2
[244/302] installing harfbuzz-devel-0.9.7-1.2
[245/302] installing libslp-utilx-devel-0.1.16-1.1
[246/302] installing rpm-libs-x86-arm-4.9.1-8.1
[247/302] installing automake-1.11.1-3.1
[248/302] installing vconf-0.2.32-1.2
Running in chroot, ignoring request.
[249/302] installing udev-182-6.2
Running in chroot, ignoring request.
Running in chroot, ignoring request.
Running in chroot, ignoring request.
Running in chroot, ignoring request.
[250/302] installing gcc-c++-4.5.3-1.3
[251/302] installing evas-1.7.1+svn.77561+build01r01-1.2
[252/302] installing ecore-x-1.7.1+svn.77580+build01r01-2.2
[253/302] installing gst-plugins-base-0.10.36-21.2
[254/302] installing rpm-build-4.9.1-4.2
[255/302] installing vconf-keys-devel-0.2.32-1.2
[256/302] installing libudev-182-6.2
[257/302] installing libtool-2.2.6b-1.2
[258/302] installing capi-system-power-0.1.1-1.1
[259/302] installing sensor-0.5.26-1.2
[260/302] installing sysman-0.2.29-1.1
[261/302] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-2.2
[262/302] installing ecore-input-evas-1.7.1+svn.77580+build01r01-2.2
[263/302] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1
"GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 "
GCC and GCC-accel versions match. Enabling cross-compiler.
cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory
cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory
[264/302] installing evas-devel-1.7.1+svn.77561+build01r01-1.2
[265/302] installing ail-0.2.55-1.2
[AIL_INITDB][D][main,214] AIL_INITDB : 0
open log dev is failed
[AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory

[AIL_INITDB][E][main,224] cannot load opt desktop directory.
/var/tmp/rpm-tmp.R6fLg4: line 23: chsmack: command not found
warning: %post(ail-0.2.55-1.2.armv7l) scriptlet failed, exit status 127
[266/302] installing pkgmgr-info-parser-0.0.54-1.2
[267/302] installing rpm-x86-arm-4.9.1-8.1
/bin/rpm.orig-arm already present - skipping.
/usr/bin/rpm2cpio.orig-arm already present - skipping.
/usr/bin/rpmdb.orig-arm already present - skipping.
/usr/bin/rpmquery.orig-arm already present - skipping.
/usr/bin/rpmsign.orig-arm already present - skipping.
/usr/bin/rpmverify.orig-arm already present - skipping.
[268/302] installing rpm-build-x86-arm-4.9.1-8.1
[269/302] installing sysman-devel-0.2.29-1.1
[270/302] installing vconf-devel-0.2.32-1.2
[271/302] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1
mv: cannot stat `/usr/bin/gprov': No such file or directory
[272/302] installing pkgmgr-info-0.0.54-1.2
[273/302] installing ecore-evas-1.7.1+svn.77580+build01r01-2.2
[274/302] installing edbus-1.7.1+svn.76526+build01r01-1.1
[275/302] installing edje-1.7.1+svn.77330+build01r03-1.1
[276/302] installing ecore-devel-1.7.1+svn.77580+build01r01-2.2
[277/302] installing aul-0.0.240-1.2
warning: group app does not exist - using root
warning: group app does not exist - using root
Running in chroot, ignoring request.
Running in chroot, ignoring request.
Running in chroot, ignoring request.
[278/302] installing efreet-devel-1.7.1+svn.77412+build01r01-2.1
[279/302] installing edbus-devel-1.7.1+svn.76526+build01r01-1.1
[280/302] installing edje-devel-1.7.1+svn.77330+build01r03-1.1
[281/302] installing edje-tools-1.7.1+svn.77330+build01r03-1.1
[282/302] installing ethumb-1.7.1+svn.75994+build01r01-1.1
[283/302] installing emotion-1.7.1+svn.76438+build01r01-1.2
[284/302] installing app-core-common-1.2-41.1
[285/302] installing power-manager-1.3.23-8.1
open log dev is failed
open log dev is failed
open log dev is failed
open log dev is failed
open log dev is failed
[286/302] installing app-svc-0.1.42-1.1
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.appsvc.db': No such file or directory
chown: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory
chmod: cannot access `/opt/dbspace/.appsvc.db': No such file or directory
chmod: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory
/var/tmp/rpm-tmp.TsSANy: line 11: chsmack: command not found
/var/tmp/rpm-tmp.TsSANy: line 12: chsmack: command not found
warning: %post(app-svc-0.1.42-1.1.armv7l) scriptlet failed, exit status 127
[287/302] installing emotion-devel-1.7.1+svn.76438+build01r01-1.2
[288/302] installing ethumb-devel-1.7.1+svn.75994+build01r01-1.1
[289/302] installing pulseaudio-0.9.23-15.1
Running in chroot, ignoring request.
Running in chroot, ignoring request.
[290/302] installing elementary-1.7.1+svn.77535+build01r05-1.1
[291/302] installing pulseaudio-libs-0.9.23-15.1
[292/302] installing elementary-devel-1.7.1+svn.77535+build01r05-1.1
[293/302] installing app-core-efl-1.2-41.1
[294/302] installing pulseaudio-libs-devel-0.9.23-15.1
[295/302] installing avsystem-0.5.4-1.1
Running in chroot, ignoring request.
Running in chroot, ignoring request.
[296/302] installing wrt-commons-0.2.93-1.1
This is new install of wrt-commons
Calling /usr/bin/wrt_commons_reset_db.sh
/opt/dbspace/.wrt.db doesn't exist
sqlite3: Error: cannot locate your home directory
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.wrt.db': No such file or directory
chmod: cannot access `/opt/dbspace/.wrt.db': No such file or directory
/usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found
sqlite3: Error: cannot locate your home directory
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.wrt_autosave.db': No such file or directory
chmod: cannot access `/opt/dbspace/.wrt_autosave.db': No such file or directory
/usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found
sqlite3: Error: cannot locate your home directory
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.wrt_custom_handler.db': No such file or directory
chmod: cannot access `/opt/dbspace/.wrt_custom_handler.db': No such file or directory
/usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found
Creating machine-id
/var/tmp/rpm-tmp.6bmttK: line 56: chsmack: command not found
/var/tmp/rpm-tmp.6bmttK: line 57: chsmack: command not found
/var/tmp/rpm-tmp.6bmttK: line 58: chsmack: command not found
/var/tmp/rpm-tmp.6bmttK: line 59: chsmack: command not found
/var/tmp/rpm-tmp.6bmttK: line 60: chsmack: command not found
/var/tmp/rpm-tmp.6bmttK: line 61: chsmack: command not found
[WRT] wrt-commons postinst done ...
[297/302] installing avsystem-devel-0.5.4-1.1
[298/302] installing security-server-0.0.61-1.1
This is new install of wrt-security
Calling /usr/bin/wrt_security_create_clean_db.sh
sqlite3: Error: cannot locate your home directory
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.ace.db': No such file or directory
chmod: cannot access `/opt/dbspace/.ace.db': No such file or directory
[WRT] wrt-security postinst done ...
[299/302] installing libsecurity-server-client-0.0.61-1.1
[300/302] installing audio-session-manager-0.2.7-1.1
open log dev is failed
[301/302] installing audio-session-manager-devel-0.2.7-1.1
[302/302] installing audio-session-manager-sdk-devel-0.2.7-1.1
now finalizing build dir...
/var/run/obs/worker/1/build/build: line 1761: /srv/build/root_1/etc/passwd: No such file or directory
Warning: spec file parser line 11: can't expand %(...)
build target is armv7l-tizen-linux
-----------------------------------------------------------------
I have the following modifications for boot-animation.spec:
3c3
< Release: 1
---
> Release: 1.1
70a71
> %changelog
-----------------------------------------------------------------
----- building boot-animation.spec (user abuild)
-----------------------------------------------------------------
-----------------------------------------------------------------
+ exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/d1a2e5f3ff23180f906d47bba4887141-boot-animation' /home/abuild/rpmbuild/SOURCES/boot-animation.spec
Building target platforms: armv7l-tizen-linux
Building for target armv7l-tizen-linux
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.XKsRqc
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/abuild/rpmbuild/BUILD
+ rm -rf boot-animation-0.4.2
+ /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/boot-animation-0.4.2.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd boot-animation-0.4.2
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ cmake . -DCMAKE_INSTALL_PREFIX=/usr
-- The C compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- checking for modules 'elementary;avsystem;audio-session-mgr;utilX;vconf;ecore-x;evas;ecore-evas;edje;x11'
--   found elementary, version 1.7.99.0
--   found avsystem, version 1.0
--   found audio-session-mgr, version 1.0
--   found utilX, version 1.1.0
--   found vconf, version 0.2.29
--   found ecore-x, version 1.7.99.0
--   found evas, version 1.7.99.0
--   found ecore-evas, version 1.7.99.0
--   found edje, version 1.7.99.0
--   found x11, version 1.5.0
-- Configuring done
-- Generating done
-- Build files have been written to: /home/abuild/rpmbuild/BUILD/boot-animation-0.4.2
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Qz1yPs
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd boot-animation-0.4.2
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
+ export FFLAGS
+ LD_AS_NEEDED=1
+ export LD_AS_NEEDED
+ cp /home/abuild/rpmbuild/SOURCES/boot-animation.manifest .
+ make -j4
Scanning dependencies of target edj_build
[  0%] [  0%] Generating poweroff.edj
Generating poweron.edj
qemu: Unsupported syscall: 250
qemu: Unsupported syscall: 250
[ 50%] Built target edj_build
Scanning dependencies of target boot-animation
[100%] [100%] Building C object CMakeFiles/boot-animation.dir/src/boot-animation.c.o
Building C object CMakeFiles/boot-animation.dir/src/animation.c.o
Linking C executable boot-animation
[100%] Built target boot-animation
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.LGLXXM
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd boot-animation-0.4.2
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm
+ /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm install
[ 50%] Built target edj_build
[100%] Built target boot-animation
Install the project...
-- Install configuration: ""
-- Installing: /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/bin/boot-animation
-- Installing: /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/share/edje/poweron.edj
-- Installing: /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/share/edje/poweroff.edj
-- Installing: /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/etc/init.d/boot-ani
+ rm -f /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/share/info/dir
+ find /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm -regex '.*\.la$'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm -regex '.*\.a$'
+ xargs rm -f --
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/lib/systemd/user/core-efl.target.wants
+ install -m 0644 /home/abuild/rpmbuild/SOURCES/boot-animation.service /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/lib/systemd/user/
+ ln -sf ../boot-animation.service /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/lib/systemd/user/core-efl.target.wants
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/share/license
+ cp -f LICENSE.Flora /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm/usr/share/license/boot-animation
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/boot-animation-0.4.2
WARNING: /usr/bin/boot-animation is already stripped!
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm//brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-python-bytecompile
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm
Processing files: boot-animation-0.4.2-1.1.armv7l
Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
cmVxdWVzdD4KPC9tYW5pZmVzdD4K

Requires(interp): /bin/sh
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires(post): /bin/sh /usr/bin/systemctl /usr/bin/vconftool
Requires: /bin/sh libX11.so.6 libascenario-0.2.so.0 libasound.so.2 libaudio-session-mgr.so.0 libavsysaudio.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdbus-1.so.3 libdlog.so.0 libecore.so.1 libecore_con.so.1 libecore_evas.so.1 libecore_file.so.1 libecore_imf.so.1 libecore_input.so.1 libecore_x.so.1 libedbus.so.1 libedje.so.1 libeet.so.1 libefreet.so.1 libefreet_mime.so.1 libefreet_trash.so.1 libeina.so.1 libelementary.so.1 libethumb_client.so.1 libevas.so.1 libglib-2.0.so.0 libm.so.6 libmmfcommon.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpulse-simple.so.0 libpulse.so.0 librt.so.1 libsysman.so.0 libutilX.so.1 libvconf.so.0
Processing files: boot-animation-debuginfo-0.4.2-1.1.armv7l
Processing files: boot-animation-debugsource-0.4.2-1.1.armv7l
Processing files: boot-animation-docs-0.4.2-1.1.armv7l
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm
Wrote: /home/abuild/rpmbuild/SRPMS/boot-animation-0.4.2-1.1.src.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/boot-animation-0.4.2-1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/boot-animation-debuginfo-0.4.2-1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/boot-animation-debugsource-0.4.2-1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/boot-animation-docs-0.4.2-1.1.armv7l.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.lmOXCl
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd boot-animation-0.4.2
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/boot-animation-0.4.2-1.1.arm
+ make clean
+ exit 0
... checking for files with abuild user/group
... creating baselibs

w19 finished "build boot-animation.spec" at Sat Feb 16 10:31:52 UTC 2013.


Retried build at Sat Feb 16 21:38:38 2013 returned same result, skipped
Retried build at Sun Feb 17 01:37:49 2013 returned same result, skipped
Retried build at Sun Feb 17 06:22:33 2013 returned same result, skipped
Retried build at Sun Feb 17 07:39:26 2013 returned same result, skipped