Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_4 Using BUILD_ARCH=armv7el w18 started "build capi-network-tethering.spec" at Sun Feb 17 15:01:14 UTC 2013. Building capi-network-tethering for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 '68a9f94d31296955c10e9a432607d412' processing specfile /srv/build/root_4/.build-srcdir/capi-network-tethering.spec ... running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/capi-network-tethering.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/capi-network-tethering.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/173] [2/173] installing capi-base-common-0.1.0-8.1 [3/173] installing kernel-headers-2.6.36-1.1 [4/173] installing libX11-common-1.5.0-2.4 [5/173] installing tizen-release-2.0.0-2.1 [6/173] installing tzdata-2011h-2.1 [7/173] installing libgcc-4.5.3-2.1 [8/173] installing setup-0.1-2.1 [9/173] installing filesystem-0.1-2.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [10/173] installing eglibc-2.13-2.14 [11/173] installing eglibc-common-2.13-2.14 warning: %post(eglibc-common-2.13-2.14.armv7l) scriptlet failed, exit status 255 [12/173] installing bash-4.1-4.1 [13/173] installing bzip2-libs-1.0.5-5.1 [14/173] installing cpio-2.8-4.1 [15/173] installing diffutils-3.0-3.1 [16/173] installing e2fsprogs-libs-1.41.11-2.4 [17/173] installing elfutils-libelf-0.152-2.12 [18/173] installing expat-2.0.1-9.1 [19/173] installing fdupes-1.40-43.1 [20/173] installing findutils-4.2.31-2.1 [21/173] installing gdbm-1.8.3-5.1 [22/173] installing kmod-5-2.2 [23/173] installing libXau-1.0.7-1.1 [24/173] installing libattr-2.4.44-8.2 [25/173] installing libffi-3.0.9-100.1 [26/173] installing libgomp-4.5.3-2.1 [27/173] installing libidn-1.15-6.1 [28/173] installing liblua-5.1.4-7.1 [29/173] installing libstdc++-4.5.3-2.1 [30/173] installing libuuid-2.20.2-5.1 [31/173] installing lzo-2.03-2.1 [32/173] installing m4-1.4.14-2.1 [33/173] installing make-3.81-1.1 [34/173] installing net-tools-1.60-89.6 [35/173] installing nspr-4.8.7-1.9 [36/173] installing nss-softokn-freebl-3.12.9-4.12 [37/173] installing patch-2.6.1.169-1.1 [38/173] installing pkgconfig-0.25-3.1 [39/173] installing popt-1.16-4.1 [40/173] installing readline-5.2-13.1 [41/173] installing sed-4.1.5-2.1 [42/173] installing smack-1.0slp2+s7-2.1 [43/173] installing sqlite-3.7.13-1.1 [44/173] installing xz-libs-5.0.3-2.1 [45/173] installing zlib-1.2.5-3.11 [46/173] installing ncurses-libs-5.7-6.1 [47/173] installing build-compare-2009.10.14-27.8 [48/173] installing libstdc++-devel-4.5.3-2.1 [49/173] installing vconf-internal-keys-devel-0.0.66-1.1 [50/173] installing capi-base-common-devel-0.1.0-8.1 [51/173] installing eglibc-headers-2.13-2.14 [52/173] installing libcap-2.21-2.1 [53/173] installing unzip-6.0-10.5 [54/173] installing zlib-devel-1.2.5-3.11 [55/173] installing c-ares-1.7.4-1.2 [56/173] installing gmp-5.0.1-2.1 [57/173] installing libacl-2.2.49-2.1 [58/173] installing libdlog-0.4.1-3.1 [59/173] installing libfile-5.04-2.1 [60/173] installing libpcre-7.9-2.1 [61/173] installing libxcb-1.8.1-1.1 [62/173] installing libxml2-2.7.8-10.1 [63/173] installing lzo-minilzo-2.03-2.1 [64/173] installing ncurses-5.7-6.1 [65/173] installing openssl-1.0.1c-2.19 [66/173] installing binutils-2.21.51.20110421-5.1 [67/173] installing bzip2-1.0.5-5.1 [68/173] installing glib2-2.32.3-5.5 [69/173] installing libblkid-2.20.2-5.1 [70/173] installing xz-5.0.3-2.1 [71/173] installing elfutils-libs-0.152-2.12 [72/173] installing nss-3.12.9-4.12 [73/173] installing perl-5.12.1-64.3 [74/173] installing ncurses-base-5.7-6.1 [75/173] installing perl-HTML-Tagset-3.20-8.1 [76/173] installing perl-IO-Compress-Base-2.008-64.3 [77/173] installing perl-Module-Pluggable-3.60-64.3 [78/173] installing perl-Pod-Escapes-1.04-64.3 [79/173] installing perl-TimeDate-1.20-1.1 [80/173] installing eglibc-devel-2.13-2.14 [81/173] installing libdlog-devel-0.4.1-3.1 [82/173] installing grep-2.5.1a-63.1 [83/173] installing lzo-devel-2.03-2.1 [84/173] installing mpfr-3.0.0-2.1 [85/173] installing perl-Compress-Raw-Zlib-2.008-64.3 [86/173] installing perl-devel-5.12.1-64.3 [87/173] installing perl-libs-5.12.1-64.3 [88/173] installing tar-1.17-3.2 [89/173] installing coreutils-6.9-10.1 [90/173] installing file-5.04-2.1 [91/173] installing libX11-1.5.0-2.4 [92/173] installing libmount-2.20.2-5.1 [93/173] installing xz-lzma-compat-5.0.3-2.1 [94/173] installing elfutils-0.152-2.12 [95/173] installing nss-sysinit-3.12.9-4.12 [96/173] installing libcurl-7.21.3-7.1 [97/173] installing libarchive-2.8.3-2.1 [98/173] installing perl-ExtUtils-ParseXS-2.18-64.3 [99/173] installing perl-Pod-Simple-3.07-64.3 [100/173] installing perl-Test-Simple-0.80-64.3 [101/173] installing tizen-accelerator-1.0.1-1.1 [102/173] installing perl-IO-Compress-Zlib-2.008-64.3 [103/173] installing perl-Test-Harness-3.12-64.3 [104/173] installing gawk-3.1.5-3.1 [105/173] installing gzip-1.3.14-2.1 [106/173] installing mpc-0.9-2.1 [107/173] installing pam-1.1.5-3.1 [108/173] installing build-2011.01.10a-2.1 [109/173] installing curl-7.21.3-7.1 [110/173] installing dbus-1.6.4-4.1 warning: group dbus does not exist - using root [111/173] installing util-linux-2.20.2-5.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [112/173] installing cmake-2.8.5-4.1 [113/173] installing glib2-devel-2.32.3-5.5 [114/173] installing bzip2-libs-x86-arm-1.0.5-8.2 [115/173] installing dbus-libs-1.6.4-4.1 [116/173] installing eglibc-x86-arm-2.13-8.6 [117/173] installing elfutils-libelf-x86-arm-0.152-8.2 [118/173] installing elfutils-libs-x86-arm-0.152-8.11 [119/173] installing gmp-x86-arm-5.0.1-8.2 [120/173] installing libacl-x86-arm-2.2.49-8.2 [121/173] installing libattr-x86-arm-2.4.44-8.2 [122/173] installing libcap-x86-arm-2.21-8.2 [123/173] installing libfile-x86-arm-5.04-8.2 [124/173] installing libgcc-x86-arm-4.5.3-8.2 [125/173] installing liblua-x86-arm-5.1.4-8.2 [126/173] installing mpc-x86-arm-0.9-8.2 [127/173] installing mpfr-x86-arm-3.0.0-9.2 [128/173] installing ncurses-libs-x86-arm-5.7-8.3 [129/173] installing nspr-x86-arm-4.8.7-8.11 [130/173] installing nss-softokn-freebl-x86-arm-3.12.9-8.10 [131/173] installing nss-x86-arm-3.12.9-8.10 [132/173] installing perl-ExtUtils-MakeMaker-6.36-64.3 [133/173] installing popt-x86-arm-1.16-8.2 [134/173] installing sqlite-x86-arm-3.7.9-8.2 [135/173] installing xz-libs-x86-arm-5.0.3-8.2 [136/173] installing zlib-x86-arm-1.2.5-8.2 [137/173] installing cpp-4.5.3-2.1 [138/173] installing rpm-4.9.1-5.2 [139/173] installing dbus-devel-1.6.4-4.1 [140/173] installing perl-CPAN-1.9205-64.3 [141/173] installing bash-x86-arm-4.1-8.2 [142/173] installing dbus-glib-0.100-4.2 [143/173] installing fdupes-x86-arm-1.40-8.2 [144/173] installing findutils-x86-arm-4.2.31-8.2 [145/173] installing gawk-x86-arm-3.1.5-8.3 [146/173] installing gzip-x86-arm-1.3.14-8.2 [147/173] installing make-x86-arm-3.81-8.2 [148/173] installing patch-x86-arm-2.6.1.169-8.2 [149/173] installing sed-x86-arm-4.1.5-8.2 [150/173] installing diffutils-x86-arm-3.0-8.2 [151/173] installing autoconf-2.68-2.1 [152/173] installing coreutils-x86-arm-6.9-8.2 [153/173] installing file-x86-arm-5.04-8.2 [154/173] installing tar-x86-arm-1.17-8.2 [155/173] installing elfutils-x86-arm-0.152-8.11 [156/173] installing systemd-43-1.2 [157/173] installing gcc-4.5.3-2.1 [158/173] installing rpm-libs-4.9.1-5.2 [159/173] installing rpm-libs-x86-arm-4.9.1-8.2 [160/173] installing automake-1.11.1-4.1 [161/173] installing vconf-0.2.32-1.2 Running in chroot, ignoring request. [162/173] installing udev-182-6.5 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [163/173] installing dbus-glib-devel-0.100-4.2 [164/173] installing gcc-c++-4.5.3-2.1 [165/173] installing rpm-build-4.9.1-5.2 [166/173] installing vconf-keys-devel-0.2.32-1.2 [167/173] installing libudev-182-6.5 [168/173] installing libtool-2.2.6b-2.1 [169/173] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [170/173] installing rpm-x86-arm-4.9.1-8.2 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [171/173] installing rpm-build-x86-arm-4.9.1-8.2 [172/173] installing vconf-devel-0.2.32-1.2 [173/173] installing cross-armv7l-binutils-accel-armv7l-2.22-1.2 mv: cannot stat `/usr/bin/gprov': No such file or directory now finalizing build dir... /var/run/obs/worker/4/build/build: line 1761: /srv/build/root_4/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for capi-network-tethering.spec: 4c4 < Release: 1 --- > Release: 1.5 ----------------------------------------------------------------- ----- building capi-network-tethering.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/68a9f94d31296955c10e9a432607d412-capi-network-tethering' /home/abuild/rpmbuild/SOURCES/capi-network-tethering.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oNRthQ + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf capi-network-tethering-0.0.11 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-tethering-0.0.11.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd capi-network-tethering-0.0.11 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.SC8clD + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-network-tethering-0.0.11 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + cmake . -DCMAKE_INSTALL_PREFIX=/usr -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- checking for module 'dlog glib-2.0 capi-base-common dbus-glib-1 vconf' -- found dlog glib-2.0 capi-base-common dbus-glib-1 vconf, version 1.0;2.32.3;0.0.1;0.100;0.2.29 running /usr/bin/glib-genmarshal --prefix=marshal include/marshal.list --header > include/marshal.h 2>&1 running /usr/bin/glib-genmarshal --prefix=marshal include/marshal.list --body > src/marshal.c 2>&1 running /usr/bin/dbus-binding-tool --prefix=tethering include/tethering.xml --mode=glib-client --output=include/tethering-client-stub.h 2>&1 -- checking for module 'glib-2.0' -- found glib-2.0, version 2.32.3 tethering_test -- Configuring done -- Generating done -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-tethering-0.0.11 + make -j4 Scanning dependencies of target capi-network-tethering [ 75%] [ 75%] [ 75%] Building C object CMakeFiles/capi-network-tethering.dir/src/marshal.c.o Building C object CMakeFiles/capi-network-tethering.dir/src/tethering.c.o Building C object CMakeFiles/capi-network-tethering.dir/src/tethering_client.c.o Linking C shared library libcapi-network-tethering.so [ 75%] Built target capi-network-tethering Scanning dependencies of target tethering_test [100%] Building C object test/CMakeFiles/tethering_test.dir/tethering_test.c.o Linking C executable tethering_test [100%] Built target tethering_test + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aJ0rZI + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-network-tethering-0.0.11 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm install [ 75%] Built target capi-network-tethering [100%] Built target tethering_test Install the project... -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/lib/libcapi-network-tethering.so.0.1.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/lib/libcapi-network-tethering.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/include/network -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/include/network/tethering.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/lib/pkgconfig/capi-network-tethering.pc + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-network-tethering-0.0.11 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm/usr/lib/libcapi-network-tethering.so.0.1.0 symlinked /usr/lib/debug/usr/lib/libcapi-network-tethering.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-network-tethering.so.debug 275 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm Processing files: capi-network-tethering-0.0.11-1.5.armv7l Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libcapi-network-tethering.so.0.1.0 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-glib-1.so.2 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libvconf.so.0 Processing files: capi-network-tethering-devel-0.0.11-1.5.armv7l Provides: pkgconfig(capi-network-tethering) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libcapi-network-tethering.so.0.1.0 pkgconfig(capi-base-common) pkgconfig(dbus-glib-1) pkgconfig(dlog) pkgconfig(glib-2.0) pkgconfig(vconf) Processing files: capi-network-tethering-debuginfo-0.0.11-1.5.armv7l Processing files: capi-network-tethering-debugsource-0.0.11-1.5.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-tethering-0.0.11-1.5.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-0.0.11-1.5.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-devel-0.0.11-1.5.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-debuginfo-0.0.11-1.5.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-debugsource-0.0.11-1.5.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.UUubiD + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-network-tethering-0.0.11 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-tethering-0.0.11-1.5.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs ... comparing built packages with the former built /usr/lib/build/rpm-check.sh compare /.build.oldpackages/capi-network-tethering-0.0.11-1.4.src.rpm /home/abuild/rpmbuild/SRPMS/capi-network-tethering-0.0.11-1.5.src.rpm compare /.build.oldpackages/capi-network-tethering-0.0.11-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-0.0.11-1.5.armv7l.rpm /usr/lib/libcapi-network-tethering.so.0.1.0 differs in assembler output --- /tmp/tmp.AMCzbM29yG 2013-02-17 15:01:47.784850918 +0000 +++ /tmp/tmp.8KHh2QbOqp 2013-02-17 15:01:47.844853504 +0000 @@ -204,561 +204,388 @@ .word 0xfffffec4 .word 0x000000d0 -tethering_client_clone: - push {r4, r5, r6, r7, lr} - mov r5, r0 - ldr r6, [pc, # ] ; () +__handle_passphrase_changed: + push {r4, r5, lr} sub sp, # - mov r7, r1 - add r6, pc - cbz r0, - movs r0, # ; 0x4c - blx <_init + ofs> - mov r4, r0 - cbz r0, - mov r1, r7 - movs r2, # ; 0x4c + mov r5, r2 blx <_init + ofs> - movs r0, # - str r4, [r5, # ] + ldr r4, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + add r4, pc + cbnz r0, <__handle_passphrase_changed + ofs> + cbz r5, <__handle_passphrase_changed + ofs> + ldr.w r3, [r5, # ] ; 0x80 + cbz r3, <__handle_passphrase_changed + ofs> + ldr.w r0, [r5, # ] ; 0x84 + blx r3 add sp, # - pop {r4, r5, r6, r7, pc} - blx <_init + ofs> - cbnz r0, - mvn.w r0, # - b.n - blx <_init + ofs> - cbnz r0, - mvn.w r0, # - b.n - ldr r0, [pc, # ] ; () - movs r1, # - ldr r2, [pc, # ] ; () - adds r0, r6, r0 - ldr r3, [pc, # ] ; () - adds r0, # ; 0x3e - str r0, [sp, # ] - ldr r0, [pc, # ] ; () - adds r2, r6, r2 - adds r3, r6, r3 - adds r6, r6, r0 - movs r0, # - str r0, [sp, # ] + pop {r4, r5, pc} + ldr r1, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + ldr r2, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + ldr r3, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + adds r1, r4, r1 + ldr r0, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + adds r1, # ; 0x3e + adds r2, r4, r2 + str r1, [sp, # ] + adds r0, r4, r0 + mov.w r1, # ; 0x1d2 str r0, [sp, # ] - mov r0, r5 - str r6, [sp, # ] - str r6, [sp, # ] - blx <_init + ofs> - mvn.w r0, # - b.n - ldr r0, [pc, # ] ; () - movs r1, # - ldr r2, [pc, # ] ; () - adds r0, r6, r0 - ldr r3, [pc, # ] ; () - adds r0, # ; 0x3e + adds r3, r4, r3 + str r1, [sp, # ] str r0, [sp, # ] - ldr r0, [pc, # ] ; () - adds r2, r6, r2 - adds r3, r6, r3 - adds r6, r6, r0 movs r0, # - str r0, [sp, # ] - str r0, [sp, # ] - mov r0, r4 - str r6, [sp, # ] - str r6, [sp, # ] - blx <_init + ofs> - mvn.w r0, # - b.n - .word 0x0000671a - .word 0xffffe6d4 - .word 0xfffff424 - .word 0xffffe6a0 - .word 0xffffe5e8 - .word 0xffffe728 - -tethering_client_destroy: - push {r4, r5, lr} - mov r5, r0 - ldr r4, [pc, # ] ; () - sub sp, # - add r4, pc - cbz r0, + str r1, [sp, # ] + movs r1, # blx <_init + ofs> - movs r0, # - add sp, # - pop {r4, r5, pc} + b.n <__handle_passphrase_changed + ofs> blx <_init + ofs> - cbnz r0, - mvn.w r0, # - b.n - ldr.w lr, [pc, # ] ; + cmp r0, # + beq.n <__handle_passphrase_changed + ofs> + ldr r1, [pc, # ] ; (<__handle_passphrase_changed + ofs>) mov r0, r5 - ldr.w ip, [pc, # ] ; - movs r1, # - ldr r2, [pc, # ] ; () - ldr r3, [pc, # ] ; () - add ip, r4 + ldr r2, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + adds r1, r4, r1 + ldr r3, [pc, # ] ; (<__handle_passphrase_changed + ofs>) + adds r1, # ; 0x3e + str r1, [sp, # ] + ldr r1, [pc, # ] ; (<__handle_passphrase_changed + ofs>) adds r2, r4, r2 - add.w ip, ip, # ; 0x3e adds r3, r4, r3 - add r4, lr - adds r4, # - mov.w lr, # ; 0x2d - str.w ip, [sp] + adds r4, r4, r1 + mov.w r1, # ; 0x1d4 + str r1, [sp, # ] + str r1, [sp, # ] + movs r1, # str r4, [sp, # ] - str.w lr, [sp, # ] str r4, [sp, # ] - str.w lr, [sp, # ] blx <_init + ofs> - mvn.w r0, # - b.n + b.n <__handle_passphrase_changed + ofs> nop - .word 0x0000666c + .word 0x00006718 + .word 0xffffec28 + .word 0xfffff1ac + .word 0xffffec0c .word 0xffffe5e8 - .word 0xffffe6d4 - .word 0xfffff424 - .word 0xffffe754 + .word 0xffffec74 -tethering_client_get_tethering_type: +__handle_usb_tether_on: push {r4, r5, lr} - mov r5, r0 - ldr r4, [pc, # ] ; () - sub sp, # ; 0x24 + sub sp, # + mov r5, r2 + blx <_init + ofs> + ldr r4, [pc, # ] ; (<__handle_usb_tether_on + ofs>) add r4, pc - cbz r0, - cmp r1, # - beq.n - ldr r3, [r0, # ] + cbnz r0, <__handle_usb_tether_on + ofs> + cmp r5, # + beq.n <__handle_usb_tether_on + ofs> + ldr r4, [r5, # ] + cbz r4, <__handle_usb_tether_on + ofs> movs r0, # - str r3, [r1, # ] - add sp, # ; 0x24 - pop {r4, r5, pc} - blx <_init + ofs> - cbnz r0, - mvn.w r0, # - b.n - ldr.w lr, [pc, # ] ; - mov r0, r5 compare /.build.oldpackages/capi-network-tethering-debuginfo-0.0.11-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-debuginfo-0.0.11-1.5.armv7l.rpm --- /tmp/tmp.W34RfbeBKX 2013-02-17 15:01:48.008860573 +0000 +++ /tmp/tmp.RxC5GBh7ZA 2013-02-17 15:01:48.024861263 +0000 @@ -1,8 +1,8 @@ /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/05/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/05/1de1e6ba836d8b9deee08a2ae91d51324cf177 0 (none) 120777 root root 0 4294967295 ../../../libcapi-network-tethering.so.0.1.0 -/usr/lib/debug/.build-id/05/1de1e6ba836d8b9deee08a2ae91d51324cf177.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-network-tethering.so.0.1.0.debug +/usr/lib/debug/.build-id/b8/ 0 (none) 40755 root root 0 4294967295 +/usr/lib/debug/.build-id/b8/ab15912da068c305f3402b4483e9da74f85abc 0 (none) 120777 root root 0 4294967295 ../../../libcapi-network-tethering.so.0.1.0 +/usr/lib/debug/.build-id/b8/ab15912da068c305f3402b4483e9da74f85abc.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-network-tethering.so.0.1.0.debug /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/libcapi-network-tethering.so.0.1.0.debug 0 (none) 100444 root root 0 4294967295 RPM meta information is different compare /.build.oldpackages/capi-network-tethering-debugsource-0.0.11-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-debugsource-0.0.11-1.5.armv7l.rpm compare /.build.oldpackages/capi-network-tethering-devel-0.0.11-1.4.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-network-tethering-devel-0.0.11-1.5.armv7l.rpm w18 finished "build capi-network-tethering.spec" at Sun Feb 17 15:01:48 UTC 2013.