Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_5 Using BUILD_ARCH=armv7el w10 started "build capi-system-media-key.spec" at Fri Feb 15 21:50:59 UTC 2013. Building capi-system-media-key for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 '0bf311f6d404b86b0a4535c9bc4bca80' processing specfile /srv/build/root_5/.build-srcdir/capi-system-media-key.spec ... running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/capi-system-media-key.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/capi-system-media-key.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs cycle: pkgmgr-info -> pkgmgr-info-parser breaking dependency pkgmgr-info-parser -> pkgmgr-info done [1/231] [2/231] installing capi-base-common-0.1.0-8.1 [3/231] installing kernel-headers-2.6.36-1.1 [4/231] installing libX11-common-1.5.0-2.1 [5/231] installing opengl-es-virtual-drv-0.1.3-10.1 [6/231] installing tizen-release-2.0.0-1.1 [7/231] installing tzdata-2011h-1.1 [8/231] installing libgcc-4.5.3-1.3 [9/231] installing setup-0.1-1.1 [10/231] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [11/231] installing eglibc-2.13-1.8 [12/231] installing eglibc-common-2.13-1.8 warning: %post(eglibc-common-2.13-1.8.armv7l) scriptlet failed, exit status 255 [13/231] installing bash-4.1-3.1 [14/231] installing bzip2-libs-1.0.5-4.2 [15/231] installing cpio-2.8-3.1 [16/231] installing diffutils-3.0-3.1 [17/231] installing e2fsprogs-libs-1.41.9-2.2 [18/231] installing eina-1.7.1+svn.77445+build01r01-1.2 [19/231] installing elfutils-libelf-0.152-1.8 [20/231] installing expat-2.0.1-8.2 [21/231] installing fdupes-1.40-42.1 [22/231] installing findutils-4.2.31-1.1 [23/231] installing fribidi-0.19.5-5.1 [24/231] installing gdbm-1.8.3-2.1 [25/231] installing kmod-5-2.1 [26/231] installing libICE-1.0.8-1.1 [27/231] installing libXau-1.0.7-1.1 [28/231] installing libattr-2.4.44-7.4 [29/231] installing libdrm2-2.4.35-11.1 [30/231] installing libgomp-4.5.3-1.3 [31/231] installing libidn-1.15-1.2 [32/231] installing libjpeg-turbo-1.2.0-7.1 [33/231] installing liblua-5.1.4-6.2 [34/231] installing libstdc++-4.5.3-1.3 [35/231] installing libuuid-2.20.2-1.1 [36/231] installing lzo-2.03-1.1 [37/231] installing m4-1.4.14-1.1 [38/231] installing net-tools-1.60-88.1 [39/231] installing nspr-4.9-1.5 [40/231] installing nss-softokn-freebl-3.12.9-5.9 [41/231] installing patch-2.6-1.1 [42/231] installing pixman-0.26.0-8.1 [43/231] installing pkgconfig-0.25-2.2 [44/231] installing popt-1.16-3.2 [45/231] installing readline-5.2-13.1 [46/231] installing sed-4.1.5-2.1 [47/231] installing smack-1.0slp2+s7-1.2 [48/231] installing sqlite-3.7.13-1.1 [49/231] installing xz-libs-5.0.3-1.2 [50/231] installing zlib-1.2.5-2.8 [51/231] installing ncurses-libs-5.7-4.2 [52/231] installing build-compare-2009.10.14-26.2 [53/231] installing libpthread-stubs-0.3-2.1 [54/231] installing libstdc++-devel-4.5.3-1.3 [55/231] installing vconf-internal-keys-devel-0.0.66-1.1 [56/231] installing xorg-x11-proto-core-7.0.23-2.1 [57/231] installing xorg-x11-proto-kb-1.0.6-2.1 [58/231] installing capi-base-common-devel-0.1.0-8.1 [59/231] installing eglibc-headers-2.13-1.8 [60/231] installing libcap-2.21-1.2 [61/231] installing sqlite-devel-3.7.13-1.1 [62/231] installing unzip-6.0-9.3 [63/231] installing zlib-devel-1.2.5-2.8 [64/231] installing c-ares-1.7.4-1.2 [65/231] installing freetype-2.4.9-2.1 [66/231] installing glib2-2.28.6-1.1 [67/231] installing gmp-5.0.1-1.2 [68/231] installing libacl-2.2.49-1.2 [69/231] installing libdlog-0.4.1-3.1 [70/231] installing libdrm-slp1-2.4.35-11.1 [71/231] installing libfile-5.04-1.2 [72/231] installing libpcre-7.9-1.3 [73/231] installing libpng-1.2.50-1.1 [74/231] installing libxcb-1.8.1-1.1 [75/231] installing libxml2-2.7.8-8.3 [76/231] installing lzo-minilzo-2.03-1.1 [77/231] installing make-3.82-152.2 [78/231] installing ncurses-5.7-4.2 [79/231] installing openssl-1.0.1c-1.9 [80/231] installing binutils-2.22-1.2 [81/231] installing bzip2-1.0.5-4.2 [82/231] installing libSM-1.2.1-1.1 [83/231] installing libblkid-2.20.2-1.1 [84/231] installing libicu-4.8-1.1 [85/231] installing libprivilege-control-0.0.19-1.1 ln: creating symbolic link `/lib/udev/rules.d/95-permissions-slp.rules': No such file or directory warning: %post(libprivilege-control-0.0.19-1.1.armv7l) scriptlet failed, exit status 1 [86/231] installing xz-5.0.3-1.2 [87/231] installing eet-1.7.1+svn.77495+build01r01-1.1 [88/231] installing elfutils-libs-0.152-1.8 [89/231] installing nss-3.12.9-5.9 [90/231] installing perl-5.12.1-61.3 [91/231] installing ncurses-base-5.7-4.2 [92/231] installing perl-HTML-Tagset-3.20-8.1 [93/231] installing perl-IO-Compress-Base-2.008-61.3 [94/231] installing perl-Module-Pluggable-3.60-61.3 [95/231] installing perl-Pod-Escapes-1.04-61.3 [96/231] installing perl-TimeDate-1.20-1.1 [97/231] installing eglibc-devel-2.13-1.8 [98/231] installing libdlog-devel-0.4.1-3.1 [99/231] installing libicu-devel-4.8-1.1 [100/231] installing grep-2.5.1a-63.1 [101/231] installing libXau-devel-1.0.7-1.1 [102/231] installing lzo-devel-2.03-1.1 [103/231] installing mpfr-3.0.0-1.2 [104/231] installing perl-Compress-Raw-Zlib-2.008-61.3 [105/231] installing perl-devel-5.12.1-61.3 [106/231] installing perl-libs-5.12.1-61.3 [107/231] installing tar-1.17-3.2 [108/231] installing bundle-0.1.27-1.1 [109/231] installing coreutils-6.9-9.4 [110/231] installing ecore-1.7.1+svn.77580+build01r01-2.1 [111/231] installing file-5.04-1.2 [112/231] installing libX11-1.5.0-2.1 [113/231] installing libmount-2.20.2-1.1 [114/231] installing xz-lzma-compat-5.0.3-1.2 [115/231] installing app-checker-0.0.16-1.1 [116/231] installing elfutils-0.152-1.8 [117/231] installing nss-sysinit-3.12.9-5.9 [118/231] installing libcurl-7.21.3-1.2 [119/231] installing libslp-db-util-0.1.1-4.1 [120/231] installing libarchive-2.8.3-1.1 [121/231] installing bundle-devel-0.1.27-1.1 [122/231] installing perl-ExtUtils-ParseXS-2.18-61.3 [123/231] installing perl-Pod-Simple-3.07-61.3 [124/231] installing perl-Test-Simple-0.80-61.3 [125/231] installing tizen-accelerator-1.0.1-1.1 [126/231] installing libXcomposite-0.4.3-3.1 [127/231] installing libXext-1.3.1-1.1 [128/231] installing libXfixes-5.0-2.1 [129/231] installing libXrender-0.9.7-1.1 [130/231] installing perl-IO-Compress-Zlib-2.008-61.3 [131/231] installing perl-Test-Harness-3.12-61.3 [132/231] installing gawk-3.1.5-2.1 [133/231] installing gzip-1.3.14-2.1 [134/231] installing libxcb-devel-1.8.1-1.1 [135/231] installing mpc-0.9-1.1 [136/231] installing pam-1.1.5-2.1 [137/231] installing xdgmime-0.0.12-2.1 chown: `root:root': invalid user [138/231] installing app-checker-server-0.0.16-1.1 [139/231] installing build-2011.01.10a-1.1 [140/231] installing ecore-input-1.7.1+svn.77580+build01r01-2.1 [141/231] installing giflib-4.1.6-13.1 [142/231] installing curl-7.21.3-1.2 [143/231] installing dbus-1.6.4-4.1 warning: group dbus does not exist - using root [144/231] installing glib2-devel-2.28.6-1.1 [145/231] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [146/231] installing app2sd-0.5-8.1 [147/231] installing fontconfig-2.9.0-2.1 [148/231] installing librua-0.1.0-34.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.rua.db': No such file or directory chown: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory /var/tmp/rpm-tmp.UmDxR4: line 9: chsmack: command not found /var/tmp/rpm-tmp.UmDxR4: line 10: chsmack: command not found warning: %post(librua-0.1.0-34.1.armv7l) scriptlet failed, exit status 127 [149/231] installing cmake-2.8.5-1.1 [150/231] installing xdgmime-devel-0.0.12-2.1 [151/231] installing bzip2-libs-x86-arm-1.0.5-8.1 [152/231] installing dbus-libs-1.6.4-4.1 [153/231] installing eglibc-x86-arm-2.13-8.2 [154/231] installing elfutils-libelf-x86-arm-0.152-8.1 [155/231] installing elfutils-libs-x86-arm-0.152-8.2 [156/231] installing gmp-x86-arm-5.0.1-8.1 [157/231] installing libacl-x86-arm-2.2.49-8.1 [158/231] installing libattr-x86-arm-2.4.44-8.1 [159/231] installing libcap-x86-arm-2.21-8.1 [160/231] installing libfile-x86-arm-5.04-8.1 [161/231] installing libgcc-x86-arm-4.5.3-8.1 [162/231] installing liblua-x86-arm-5.1.4-8.1 [163/231] installing mpc-x86-arm-0.9-8.1 [164/231] installing mpfr-x86-arm-3.0.0-9.1 [165/231] installing ncurses-libs-x86-arm-5.7-8.1 [166/231] installing nspr-x86-arm-4.9-8.2 [167/231] installing nss-softokn-freebl-x86-arm-3.12.9-8.1 [168/231] installing nss-x86-arm-3.12.9-8.1 [169/231] installing perl-ExtUtils-MakeMaker-6.36-61.3 [170/231] installing popt-x86-arm-1.16-8.1 [171/231] installing sqlite-x86-arm-3.7.9-8.1 [172/231] installing xz-libs-x86-arm-5.0.3-8.1 [173/231] installing zlib-x86-arm-1.2.5-8.1 [174/231] installing libXdamage-1.1.3-3.1 [175/231] installing libXgesture-0.1.0-3.1 [176/231] installing libXi-1.6.1-1.1 [177/231] installing libXinerama-1.1.2-1.1 [178/231] installing libXv-1.0.7-1.1 [179/231] installing libdri2-0.1.0-11.1 [180/231] installing libX11-devel-1.5.0-2.1 [181/231] installing libXcursor-1.1.13-1.1 [182/231] installing libXrandr-1.4.0-3.1 [183/231] installing libslp-db-util-devel-0.1.1-4.1 [184/231] installing cpp-4.5.3-1.3 [185/231] installing cairo-1.12.8-2.1 [186/231] installing rpm-4.9.1-4.2 [187/231] installing perl-CPAN-1.9205-61.3 [188/231] installing bash-x86-arm-4.1-8.1 [189/231] installing dbus-glib-0.100-4.1 [190/231] installing fdupes-x86-arm-1.40-8.1 [191/231] installing findutils-x86-arm-4.2.31-8.1 [192/231] installing gawk-x86-arm-3.1.5-8.2 [193/231] installing gzip-x86-arm-1.3.14-8.1 [194/231] installing make-x86-arm-3.82-8.1 [195/231] installing sed-x86-arm-4.1.5-8.1 [196/231] installing diffutils-x86-arm-3.0-8.1 [197/231] installing libXtst-1.2.0-3.1 [198/231] installing patch-x86-arm-2.6-8.1 [199/231] installing autoconf-2.68-1.1 [200/231] installing coreutils-x86-arm-6.9-8.1 [201/231] installing file-x86-arm-5.04-8.1 [202/231] installing tar-x86-arm-1.17-8.1 [203/231] installing harfbuzz-0.9.7-1.1 [204/231] installing elfutils-x86-arm-0.152-8.2 [205/231] installing systemd-43-1.1 [206/231] installing libslp-utilx-0.1.16-1.1 [207/231] installing gcc-4.5.3-1.3 [208/231] installing rpm-libs-4.9.1-4.2 [209/231] installing libslp-utilx-devel-0.1.16-1.1 [210/231] installing rpm-libs-x86-arm-4.9.1-8.1 [211/231] installing automake-1.11.1-3.1 [212/231] installing vconf-0.2.32-1.1 Running in chroot, ignoring request. [213/231] installing udev-182-6.1 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [214/231] installing gcc-c++-4.5.3-1.3 [215/231] installing evas-1.7.1+svn.77561+build01r01-1.1 [216/231] installing ecore-x-1.7.1+svn.77580+build01r01-2.1 [217/231] installing rpm-build-4.9.1-4.2 [218/231] installing vconf-keys-devel-0.2.32-1.1 [219/231] installing libudev-182-6.1 [220/231] installing libtool-2.2.6b-1.2 [221/231] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [222/231] installing ail-0.2.55-1.1 [AIL_INITDB][D][main,214] AIL_INITDB : 0 open log dev is failed [AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory [AIL_INITDB][E][main,224] cannot load opt desktop directory. /var/tmp/rpm-tmp.5LQ7by: line 23: chsmack: command not found warning: %post(ail-0.2.55-1.1.armv7l) scriptlet failed, exit status 127 [223/231] installing pkgmgr-info-parser-0.0.54-1.1 [224/231] installing rpm-x86-arm-4.9.1-8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [225/231] installing rpm-build-x86-arm-4.9.1-8.1 [226/231] installing vconf-devel-0.2.32-1.1 [227/231] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [228/231] installing pkgmgr-info-0.0.54-1.1 [229/231] installing ail-devel-0.2.55-1.1 [230/231] installing aul-0.0.240-1.1 warning: group app does not exist - using root warning: group app does not exist - using root Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [231/231] installing aul-devel-0.0.240-1.1 now finalizing build dir... /var/run/obs/worker/5/build/build: line 1761: /srv/build/root_5/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for capi-system-media-key.spec: 4c4 < Release: 6 --- > Release: 6.1 ----------------------------------------------------------------- ----- building capi-system-media-key.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/0bf311f6d404b86b0a4535c9bc4bca80-capi-system-media-key' /home/abuild/rpmbuild/SOURCES/capi-system-media-key.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.0oKHQl + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf capi-system-media-key-0.1.0 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-media-key-0.1.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd capi-system-media-key-0.1.0 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kytNZI + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-media-key-0.1.0 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED ++ echo 0.1.0 ++ awk 'BEGIN {FS="."}{print $1}' + MAJORVER=0 + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.1.0 -DMAJORVER=0 -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- checking for module 'dlog capi-base-common aul utilX' -- found dlog capi-base-common aul utilX, version 1.0;0.0.1;0.1.0;1.1.0 -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: CMAKE_INSTALL_LIBDIR INCLUDE_INSTALL_DIR SHARE_INSTALL_PREFIX SYSCONF_INSTALL_DIR -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 + make -j4 /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 -B/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles/progress.marks make -f CMakeFiles/Makefile2 all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' make -f CMakeFiles/capi-system-media-key.dir/build.make CMakeFiles/capi-system-media-key.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' cd /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles/capi-system-media-key.dir/DependInfo.cmake --color= Scanning dependencies of target capi-system-media-key make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' make -f CMakeFiles/capi-system-media-key.dir/build.make CMakeFiles/capi-system-media-key.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles 1 [100%] Building C object CMakeFiles/capi-system-media-key.dir/src/media_key.c.o /usr/bin/gcc -Dcapi_system_media_key_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/dlog -I/usr/include/aul -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -I/usr/include/db-util -fPIC -Wall -Werror -fPIC -I/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/include -o CMakeFiles/capi-system-media-key.dir/src/media_key.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/src/media_key.c Linking C shared library libcapi-system-media-key.so /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-media-key.dir/link.txt --verbose=1 /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I/usr/include/dlog -I/usr/include/aul -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/vconf -I/usr/include/db-util -fPIC -Wall -Werror -shared -Wl,-soname,libcapi-system-media-key.so.0 -o libcapi-system-media-key.so.0.1.0 CMakeFiles/capi-system-media-key.dir/src/media_key.c.o -laul -lbundle -lail -lxdgmime -lvconf -lSLP-db-util -lsqlite3 -ldlog -lpthread -lglib-2.0 -licui18n -licuuc -licudata -lutilX /usr/bin/cmake -E cmake_symlink_library libcapi-system-media-key.so.0.1.0 libcapi-system-media-key.so.0 libcapi-system-media-key.so make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles 1 [100%] Built target capi-system-media-key make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles 0 + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mEmqji + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-media-key-0.1.0 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm install /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 -B/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 --check-build-system CMakeFiles/Makefile.cmake 0 /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles/progress.marks /usr/bin/make -f CMakeFiles/Makefile2 all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/make -f CMakeFiles/capi-system-media-key.dir/build.make CMakeFiles/capi-system-media-key.dir/depend make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' cd /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles/capi-system-media-key.dir/DependInfo.cmake --color= make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/make -f CMakeFiles/capi-system-media-key.dir/build.make CMakeFiles/capi-system-media-key.dir/build make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' make[2]: Nothing to be done for `CMakeFiles/capi-system-media-key.dir/build'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles 1 [100%] Built target capi-system-media-key make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0/CMakeFiles 0 /usr/bin/make -f CMakeFiles/Makefile2 preinstall make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' make[1]: Nothing to be done for `preinstall'. make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0' Install the project... /usr/bin/cmake -P cmake_install.cmake -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/lib/libcapi-system-media-key.so.0.1.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/lib/libcapi-system-media-key.so.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/lib/libcapi-system-media-key.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/include/system -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/include/system/media_key.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/lib/pkgconfig/capi-system-media-key.pc + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-media-key-0.1.0 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm/usr/lib/libcapi-system-media-key.so.0.1.0 symlinked /usr/lib/debug/usr/lib/libcapi-system-media-key.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-media-key.so.0.debug symlinked /usr/lib/debug/usr/lib/libcapi-system-media-key.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-media-key.so.debug 12 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm Processing files: capi-system-media-key-0.1.0-6.1.armv7l Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libcapi-system-media-key.so.0 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: libSLP-db-util.so.0 libail.so.0 libaul.so.0 libbundle.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libicudata.so.48 libicui18n.so.48 libicuuc.so.48 libpthread.so.0 libsqlite3.so.0 libutilX.so.1 libvconf.so.0 libxdgmime.so.1 Processing files: capi-system-media-key-devel-0.1.0-6.1.armv7l Provides: pkgconfig(capi-system-media-key) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libcapi-system-media-key.so.0 pkgconfig(capi-base-common) Processing files: capi-system-media-key-debuginfo-0.1.0-6.1.armv7l Processing files: capi-system-media-key-debugsource-0.1.0-6.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-media-key-0.1.0-6.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-media-key-0.1.0-6.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-media-key-devel-0.1.0-6.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-media-key-debuginfo-0.1.0-6.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-media-key-debugsource-0.1.0-6.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.4IXvT2 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-media-key-0.1.0 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-media-key-0.1.0-6.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w10 finished "build capi-system-media-key.spec" at Fri Feb 15 21:51:37 UTC 2013. Retried build at Fri Feb 15 14:21:32 2013 returned same result, skipped Retried build at Sat Feb 16 21:08:25 2013 returned same result, skipped Retried build at Sun Feb 17 00:09:24 2013 returned same result, skipped Retried build at Sun Feb 17 07:27:33 2013 returned same result, skipped