Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_7 Using BUILD_ARCH=armv7el w34 started "build capi-system-sensor.spec" at Sun Feb 17 15:01:48 UTC 2013. Building capi-system-sensor for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 'fd13b401810f034e914afb468f8799a2' processing specfile /srv/build/root_7/.build-srcdir/capi-system-sensor.spec ... running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/capi-system-sensor.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/capi-system-sensor.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/169] [2/169] installing capi-base-common-0.1.0-8.1 [3/169] installing kernel-headers-2.6.36-1.1 [4/169] installing libX11-common-1.5.0-2.4 [5/169] installing tizen-release-2.0.0-2.1 [6/169] installing tzdata-2011h-2.1 [7/169] installing libgcc-4.5.3-2.1 [8/169] installing setup-0.1-2.1 [9/169] installing filesystem-0.1-2.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [10/169] installing eglibc-2.13-2.14 [11/169] installing eglibc-common-2.13-2.14 warning: %post(eglibc-common-2.13-2.14.armv7l) scriptlet failed, exit status 255 [12/169] installing bash-4.1-4.1 [13/169] installing bzip2-libs-1.0.5-5.1 [14/169] installing cpio-2.8-4.1 [15/169] installing diffutils-3.0-3.1 [16/169] installing e2fsprogs-libs-1.41.11-2.4 [17/169] installing elfutils-libelf-0.152-2.12 [18/169] installing expat-2.0.1-9.1 [19/169] installing fdupes-1.40-43.1 [20/169] installing findutils-4.2.31-2.1 [21/169] installing gdbm-1.8.3-5.1 [22/169] installing kmod-5-2.2 [23/169] installing libXau-1.0.7-1.1 [24/169] installing libattr-2.4.44-8.2 [25/169] installing libffi-3.0.9-100.1 [26/169] installing libgomp-4.5.3-2.1 [27/169] installing libidn-1.15-6.1 [28/169] installing liblua-5.1.4-7.1 [29/169] installing libstdc++-4.5.3-2.1 [30/169] installing libuuid-2.20.2-5.1 [31/169] installing lzo-2.03-2.1 [32/169] installing m4-1.4.14-2.1 [33/169] installing make-3.81-1.1 [34/169] installing net-tools-1.60-89.6 [35/169] installing nspr-4.8.7-1.9 [36/169] installing nss-softokn-freebl-3.12.9-4.12 [37/169] installing patch-2.6.1.169-1.1 [38/169] installing pkgconfig-0.25-3.1 [39/169] installing popt-1.16-4.1 [40/169] installing readline-5.2-13.1 [41/169] installing sed-4.1.5-2.1 [42/169] installing smack-1.0slp2+s7-2.1 [43/169] installing sqlite-3.7.13-1.1 [44/169] installing xz-libs-5.0.3-2.1 [45/169] installing zlib-1.2.5-3.11 [46/169] installing ncurses-libs-5.7-6.1 [47/169] installing build-compare-2009.10.14-27.8 [48/169] installing libstdc++-devel-4.5.3-2.1 [49/169] installing capi-base-common-devel-0.1.0-8.1 [50/169] installing eglibc-headers-2.13-2.14 [51/169] installing libcap-2.21-2.1 [52/169] installing unzip-6.0-10.5 [53/169] installing zlib-devel-1.2.5-3.11 [54/169] installing c-ares-1.7.4-1.2 [55/169] installing gmp-5.0.1-2.1 [56/169] installing libacl-2.2.49-2.1 [57/169] installing libdlog-0.4.1-3.1 [58/169] installing libfile-5.04-2.1 [59/169] installing libpcre-7.9-2.1 [60/169] installing libxcb-1.8.1-1.1 [61/169] installing libxml2-2.7.8-10.1 [62/169] installing lzo-minilzo-2.03-2.1 [63/169] installing ncurses-5.7-6.1 [64/169] installing openssl-1.0.1c-2.19 [65/169] installing binutils-2.21.51.20110421-5.1 [66/169] installing bzip2-1.0.5-5.1 [67/169] installing glib2-2.32.3-5.5 [68/169] installing libblkid-2.20.2-5.1 [69/169] installing xz-5.0.3-2.1 [70/169] installing elfutils-libs-0.152-2.12 [71/169] installing nss-3.12.9-4.12 [72/169] installing perl-5.12.1-64.3 [73/169] installing ncurses-base-5.7-6.1 [74/169] installing perl-HTML-Tagset-3.20-8.1 [75/169] installing perl-IO-Compress-Base-2.008-64.3 [76/169] installing perl-Module-Pluggable-3.60-64.3 [77/169] installing perl-Pod-Escapes-1.04-64.3 [78/169] installing perl-TimeDate-1.20-1.1 [79/169] installing eglibc-devel-2.13-2.14 [80/169] installing libdlog-devel-0.4.1-3.1 [81/169] installing grep-2.5.1a-63.1 [82/169] installing lzo-devel-2.03-2.1 [83/169] installing mpfr-3.0.0-2.1 [84/169] installing perl-Compress-Raw-Zlib-2.008-64.3 [85/169] installing perl-devel-5.12.1-64.3 [86/169] installing perl-libs-5.12.1-64.3 [87/169] installing tar-1.17-3.2 [88/169] installing coreutils-6.9-10.1 [89/169] installing file-5.04-2.1 [90/169] installing libX11-1.5.0-2.4 [91/169] installing libmount-2.20.2-5.1 [92/169] installing libsf-common-0.3.18-1.1 [93/169] installing xz-lzma-compat-5.0.3-2.1 [94/169] installing elfutils-0.152-2.12 [95/169] installing nss-sysinit-3.12.9-4.12 [96/169] installing libcurl-7.21.3-7.1 [97/169] installing libarchive-2.8.3-2.1 [98/169] installing perl-ExtUtils-ParseXS-2.18-64.3 [99/169] installing perl-Pod-Simple-3.07-64.3 [100/169] installing perl-Test-Simple-0.80-64.3 [101/169] installing tizen-accelerator-1.0.1-1.1 [102/169] installing perl-IO-Compress-Zlib-2.008-64.3 [103/169] installing perl-Test-Harness-3.12-64.3 [104/169] installing gawk-3.1.5-3.1 [105/169] installing gzip-1.3.14-2.1 [106/169] installing mpc-0.9-2.1 [107/169] installing pam-1.1.5-3.1 [108/169] installing build-2011.01.10a-2.1 [109/169] installing curl-7.21.3-7.1 [110/169] installing dbus-1.6.4-4.1 warning: group dbus does not exist - using root [111/169] installing util-linux-2.20.2-5.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [112/169] installing cmake-2.8.5-4.1 [113/169] installing bzip2-libs-x86-arm-1.0.5-8.2 [114/169] installing dbus-libs-1.6.4-4.1 [115/169] installing eglibc-x86-arm-2.13-8.6 [116/169] installing elfutils-libelf-x86-arm-0.152-8.2 [117/169] installing elfutils-libs-x86-arm-0.152-8.11 [118/169] installing gmp-x86-arm-5.0.1-8.2 [119/169] installing libacl-x86-arm-2.2.49-8.2 [120/169] installing libattr-x86-arm-2.4.44-8.2 [121/169] installing libcap-x86-arm-2.21-8.2 [122/169] installing libfile-x86-arm-5.04-8.2 [123/169] installing libgcc-x86-arm-4.5.3-8.2 [124/169] installing liblua-x86-arm-5.1.4-8.2 [125/169] installing mpc-x86-arm-0.9-8.2 [126/169] installing mpfr-x86-arm-3.0.0-9.2 [127/169] installing ncurses-libs-x86-arm-5.7-8.3 [128/169] installing nspr-x86-arm-4.8.7-8.11 [129/169] installing nss-softokn-freebl-x86-arm-3.12.9-8.10 [130/169] installing nss-x86-arm-3.12.9-8.10 [131/169] installing perl-ExtUtils-MakeMaker-6.36-64.3 [132/169] installing popt-x86-arm-1.16-8.2 [133/169] installing sqlite-x86-arm-3.7.9-8.2 [134/169] installing xz-libs-x86-arm-5.0.3-8.2 [135/169] installing zlib-x86-arm-1.2.5-8.2 [136/169] installing cpp-4.5.3-2.1 [137/169] installing rpm-4.9.1-5.2 [138/169] installing perl-CPAN-1.9205-64.3 [139/169] installing bash-x86-arm-4.1-8.2 [140/169] installing fdupes-x86-arm-1.40-8.2 [141/169] installing findutils-x86-arm-4.2.31-8.2 [142/169] installing gawk-x86-arm-3.1.5-8.3 [143/169] installing gzip-x86-arm-1.3.14-8.2 [144/169] installing make-x86-arm-3.81-8.2 [145/169] installing patch-x86-arm-2.6.1.169-8.2 [146/169] installing sed-x86-arm-4.1.5-8.2 [147/169] installing diffutils-x86-arm-3.0-8.2 [148/169] installing autoconf-2.68-2.1 [149/169] installing coreutils-x86-arm-6.9-8.2 [150/169] installing file-x86-arm-5.04-8.2 [151/169] installing tar-x86-arm-1.17-8.2 [152/169] installing elfutils-x86-arm-0.152-8.11 [153/169] installing systemd-43-1.2 [154/169] installing gcc-4.5.3-2.1 [155/169] installing rpm-libs-4.9.1-5.2 [156/169] installing rpm-libs-x86-arm-4.9.1-8.2 [157/169] installing automake-1.11.1-4.1 [158/169] installing vconf-0.2.32-1.2 Running in chroot, ignoring request. [159/169] installing udev-182-6.5 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [160/169] installing gcc-c++-4.5.3-2.1 [161/169] installing rpm-build-4.9.1-5.2 [162/169] installing libudev-182-6.5 [163/169] installing libtool-2.2.6b-2.1 [164/169] installing sensor-0.5.26-1.2 [165/169] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [166/169] installing rpm-x86-arm-4.9.1-8.2 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [167/169] installing rpm-build-x86-arm-4.9.1-8.2 [168/169] installing sensor-devel-0.5.26-1.2 [169/169] installing cross-armv7l-binutils-accel-armv7l-2.22-1.2 mv: cannot stat `/usr/bin/gprov': No such file or directory now finalizing build dir... /var/run/obs/worker/7/build/build: line 1761: /srv/build/root_7/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for capi-system-sensor.spec: 4c4 < Release: 10 --- > Release: 10.6 ----------------------------------------------------------------- ----- building capi-system-sensor.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/fd13b401810f034e914afb468f8799a2-capi-system-sensor' /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ifx2nX + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf capi-system-sensor-0.1.17 + /bin/tar -xf - + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.1.17.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd capi-system-sensor-0.1.17 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.VyTHAE + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-sensor-0.1.17 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED ++ echo 0.1.17 ++ awk 'BEGIN {FS="."}{print $1}' + MAJORVER=0 + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.17 -DMAJORVER=0 -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- checking for module 'dlog sensor capi-base-common' -- found dlog sensor capi-base-common, version 1.0;1.1.0;0.0.1 -- Configuring done -- Generating done -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.1.17 + make -j4 Scanning dependencies of target capi-system-sensor [100%] [100%] [100%] Building C object CMakeFiles/capi-system-sensor.dir/src/geomanetic_field.c.o Building C object CMakeFiles/capi-system-sensor.dir/src/sensor.c.o Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o Linking C shared library libcapi-system-sensor.so [100%] Built target capi-system-sensor + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.M0LnNz + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-sensor-0.1.17 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm install [100%] Built target capi-system-sensor Install the project... -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/lib/libcapi-system-sensor.so.0.1.17 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/lib/libcapi-system-sensor.so.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/lib/libcapi-system-sensor.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/include/system -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/include/system/sensors.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/lib/pkgconfig/capi-system-sensor.pc + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm -regex '.*\.a$' + xargs rm -f -- + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/share/license + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/share/license/capi-system-sensor + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.1.17 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm/usr/lib/libcapi-system-sensor.so.0.1.17 symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.17.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.debug symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.17.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.debug 298 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm Processing files: capi-system-sensor-0.1.17-10.6.armv7l Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= Provides: libcapi-system-sensor.so.0 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsensor.so.1 Processing files: capi-system-sensor-devel-0.1.17-10.6.armv7l Provides: pkgconfig(capi-system-sensor) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0 pkgconfig(capi-base-common) Processing files: capi-system-sensor-debuginfo-0.1.17-10.6.armv7l Processing files: capi-system-sensor-debugsource-0.1.17-10.6.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.17-10.6.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.1.17-10.6.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.1.17-10.6.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.1.17-10.6.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.1.17-10.6.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.M2puEt + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-system-sensor-0.1.17 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.17-10.6.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs ... comparing built packages with the former built /usr/lib/build/rpm-check.sh compare /.build.oldpackages/capi-system-sensor-0.1.17-10.5.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.17-10.6.src.rpm compare /.build.oldpackages/capi-system-sensor-0.1.17-10.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-0.1.17-10.6.armv7l.rpm /usr/lib/libcapi-system-sensor.so.0.1.17 differs in assembler output --- /tmp/tmp.nfaaHE8yBL 2013-02-17 15:02:19.762609496 +0000 +++ /tmp/tmp.0VnklAHtnj 2013-02-17 15:02:19.822612647 +0000 @@ -177,1668 +177,1985 @@ .word 0xfffffe94 .word 0x000000c8 -clamp: - vmov s15, r0 - vldr s14, [pc, # ] ; - vcmp.f32 s15, s14 - vmrs APSR_nzcv, fpscr - it mi - vmovmi.f32 s15, s14 - vmov r0, s15 - bx lr - .word 0x00000000 - -getAngleChange: - push {r3, r4, r5, lr} - vpush {d8-d11} - rsbs r4, r0, # - it cc - movcc r4, # +E0000.clone.0: + stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr} + vpush {d8-d12} + cmp r0, # + sub sp, # ; 0x2c + ldr.w r4, [pc, # ] ; + vmov.f32 s16, s0 + add r4, pc + str r1, [sp, # ] + str r2, [sp, # ] + str r3, [sp, # ] + vmov.f32 s18, s1 + vmov.f32 s19, s2 + vmov.f32 s17, s3 + beq.w + ldr.w r1, [pc, # ] ; + mov.w r0, # ; 0x3f800000 + vmov s13, r0 + movs r6, # + movs r7, # + mov r3, r6 + str r1, [sp, # ] + adds r1, r4, r1 + ldr.w r9, [sp, # ] + mov r2, r6 + str r0, [r1, # ] ; 0x38 + mov r5, r1 + str r0, [r1, # ] ; 0x6c + mov.w fp, # + str.w r0, [r1, # ] ; 0x310 + movw r0, # ; 0x199a + movt r0, # ; 0x45c7 + str.w r0, [r1, # ] ; 0x5f0 + movw r0, # ; 0x2f2f + str.w r7, [r4, r9] + movt r0, # ; 0x4c1b + str.w r0, [r1, # ] ; 0x5f4 + movw r0, # ; 0x253b + movw r4, # ; 0x5119 + movt r0, # ; 0x4c1a + str.w r0, [r1, # ] ; 0x5f8 + mov.w r0, # ; 0xfa00 + mov r8, r6 + movt r0, # ; 0x4884 + str.w r0, [r1, # ] ; 0x5fc + movw r0, # ; 0x2457 + movt r4, # ; 0x45c7 + movt r0, # ; 0x58bc + str.w r0, [r1, # ] ; 0x600 + movw r0, # ; 0xa1a1 + str.w r4, [r1, # ] ; 0x5e8 + movt r0, # ; 0x58b9 + movw r4, # ; 0xa605 + str.w r0, [r1, # ] ; 0x604 + movw r0, # ; 0xad80 + mov.w ip, # + movt r4, # ; 0x45c6 + movt r0, # ; 0x55a0 + str.w ip, [r1, # ] + str.w ip, [r1, # ] ; 0x344 + str.w r4, [r1, # ] ; 0x5ec + str.w r0, [r1, # ] ; 0x608 + str.w ip, [r1, # ] ; 0x60c + str.w r6, [r1, # ] ; 0x640 + lsls r0, r2, # + vmov s12, r2 + subs r0, # + vcvt.f32.s32 s15, s12 + vmov s12, r0 + adds r1, r2, # cmp r1, # - it eq - orreq.w r4, r4, # - mov r5, r2 - cbz r4, - mov.w r0, # - vpop {d8-d11} - pop {r3, r4, r5, pc} - cmp r2, # - beq.n - vldr s19, [r0, # ] - vldr s14, [r1, # ] - vldr s15, [r1, # ] - vmul.f32 s14, s19, s14 - vldr s21, [r0, # ] - vldr s4, [r1] - vldr s5, [r1, # ] - vldr s18, [r1, # ] - vldr s6, [r0, # ] - vldr s7, [r0, # ] - vldr s23, [r0, # ] - vldr s8, [r1, # ] - vldr s9, [r1, # ] - vldr s20, [r1, # ] - vldr s10, [r0] - vldr s11, [r0, # ] - vldr s22, [r1, # ] - vldr s12, [r0, # ] - vldr s13, [r0, # ] - vmul.f32 s15, s19, s15 - vmla.f32 s14, s21, s4 - vmla.f32 s15, s21, s5 - vmul.f32 s16, s18, s6 - vmul.f32 s17, s18, s7 - vmla.f32 s14, s23, s8 - vmla.f32 s15, s23, s9 - vmla.f32 s16, s20, s10 - vmla.f32 s17, s20, s11 - vcvt.f64.f32 d17, s14 - vcvt.f64.f32 d16, s15 - vmov r0, r1, d17 - vmov r2, r3, d16 - vmla.f32 s16, s22, s12 - vmla.f32 s17, s22, s13 - blx <_init + ofs> - vmul.f32 s15, s18, s19 - vmov d16, r0, r1 - vmla.f32 s15, s20, s21 - vmla.f32 s15, s22, s23 - vcvt.f32.f64 s14, d16 - vneg.f32 s15, s15 - vstr s14, [r5] - vmov r0, s15 - vneg.f32 s16, s16 - blx <_init + ofs> - vcvt.f64.f32 d16, s17 - vcvt.f64.f32 d17, s16 - vmov r2, r3, d16 - str r0, [r5, # ] - vmov r0, r1, d17 - blx <_init + ofs> - vmov d16, r0, r1 + add.w r2, r5, r2, lsl # + mov.w r9, # + str.w fp, [r5, # ] ; 0x648 + str.w r9, [r5, # ] ; 0x644 + it le + movle r6, r3 + str.w r8, [r5, # ] ; 0x64c + str.w r1, [r5, # ] ; 0x650 + vcvt.f32.s32 s14, s12 + vmul.f32 s14, s14, s13 + vdiv.f32 s15, s14, s15 + vstr s15, [r2, # ] ; 0x6c + ble.n + mov r4, fp + mov r6, r3 + b.n + ldr.w r6, [r5, # ] ; 0x640 + subs r2, r6, # + lsls r3, r6, # + subs r1, r3, # + add.w r9, r3, # + mul.w r2, r2, r2 + lsls r7, r4, # + mul.w r9, r9, r1 + vmov s13, r9 + vcvt.f32.s32 s15, s13 + subs r3, r4, # + adds r1, r7, r4 + rsb ip, r4, r6 + add.w sl, r4, r6 + mls r2, r4, r4, r2 + vmov s12, r2 + add.w r0, r3, r3, lsl # + add.w r1, r4, r1, lsl # + adds r1, r1, r6 + add.w r3, r3, r0, lsl # + vcvt.f32.s32 s14, s12 + adds r3, r3, r6 + add.w r1, r5, r1, lsl # + cmp r4, # + add.w r3, r5, r3, lsl # + vdiv.f32 s15, s14, s15 + vmov r2, s15 + str.w r2, [r1, # ] ; 0x654 + ble.n compare /.build.oldpackages/capi-system-sensor-debuginfo-0.1.17-10.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debuginfo-0.1.17-10.6.armv7l.rpm --- /tmp/tmp.EHbTlEDRTE 2013-02-17 15:02:19.974620631 +0000 +++ /tmp/tmp.PaAhn7gR0P 2013-02-17 15:02:19.990621471 +0000 @@ -1,8 +1,8 @@ /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/71/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/71/8971a25ba108e23eef7e30f0b57f78e9829b66 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-sensor.so.0.1.17 -/usr/lib/debug/.build-id/71/8971a25ba108e23eef7e30f0b57f78e9829b66.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-sensor.so.0.1.17.debug +/usr/lib/debug/.build-id/ab/ 0 (none) 40755 root root 0 4294967295 +/usr/lib/debug/.build-id/ab/3ccd9ed6459bbc94d6e8f63252b16c6ccd3a60 0 (none) 120777 root root 0 4294967295 ../../../libcapi-system-sensor.so.0.1.17 +/usr/lib/debug/.build-id/ab/3ccd9ed6459bbc94d6e8f63252b16c6ccd3a60.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-system-sensor.so.0.1.17.debug /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.17.debug 0 (none) 100444 root root 0 4294967295 RPM meta information is different compare /.build.oldpackages/capi-system-sensor-debugsource-0.1.17-10.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-debugsource-0.1.17-10.6.armv7l.rpm compare /.build.oldpackages/capi-system-sensor-devel-0.1.17-10.5.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-system-sensor-devel-0.1.17-10.6.armv7l.rpm w34 finished "build capi-system-sensor.spec" at Sun Feb 17 15:02:20 UTC 2013.