Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_8 Using BUILD_ARCH=armv7el w20 started "build edje.spec" at Fri Feb 15 21:50:07 UTC 2013. Building edje for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 'deff3445b1f2108bc7c623f5f7eeed9e' processing specfile /srv/build/root_8/.build-srcdir/edje.spec ... running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/edje.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/edje.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/202] [2/202] installing kernel-headers-2.6.36-1.1 [3/202] installing libX11-common-1.5.0-2.1 [4/202] installing opengl-es-virtual-drv-0.1.3-10.1 [5/202] installing tizen-release-2.0.0-1.1 [6/202] installing tzdata-2011h-1.1 [7/202] installing libgcc-4.5.3-1.3 [8/202] installing setup-0.1-1.1 [9/202] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [10/202] installing eglibc-2.13-1.8 [11/202] installing eglibc-common-2.13-1.8 warning: %post(eglibc-common-2.13-1.8.armv7l) scriptlet failed, exit status 255 [12/202] installing bash-4.1-3.1 [13/202] installing bzip2-libs-1.0.5-4.2 [14/202] installing cpio-2.8-3.1 [15/202] installing diffutils-3.0-3.1 [16/202] installing e2fsprogs-libs-1.41.9-2.2 [17/202] installing eina-1.7.1+svn.77445+build01r01-1.2 [18/202] installing elfutils-libelf-0.152-1.8 [19/202] installing expat-2.0.1-8.2 [20/202] installing fdupes-1.40-42.1 [21/202] installing findutils-4.2.31-1.1 [22/202] installing fribidi-0.19.5-5.1 [23/202] installing gdbm-1.8.3-2.1 [24/202] installing libICE-1.0.8-1.1 [25/202] installing libXau-1.0.7-1.1 [26/202] installing libattr-2.4.44-7.4 [27/202] installing libgomp-4.5.3-1.3 [28/202] installing libidn-1.15-1.2 [29/202] installing libjpeg-turbo-1.2.0-7.1 [30/202] installing liblua-5.1.4-6.2 [31/202] installing libstdc++-4.5.3-1.3 [32/202] installing libuuid-2.20.2-1.1 [33/202] installing lzo-2.03-1.1 [34/202] installing m4-1.4.14-1.1 [35/202] installing net-tools-1.60-88.1 [36/202] installing nspr-4.9-1.5 [37/202] installing nss-softokn-freebl-3.12.9-5.9 [38/202] installing patch-2.6-1.1 [39/202] installing pixman-0.26.0-8.1 [40/202] installing pkgconfig-0.25-2.2 [41/202] installing popt-1.16-3.2 [42/202] installing readline-5.2-13.1 [43/202] installing sed-4.1.5-2.1 [44/202] installing sqlite-3.7.13-1.1 [45/202] installing xz-libs-5.0.3-1.2 [46/202] installing zlib-1.2.5-2.8 [47/202] installing ncurses-libs-5.7-4.2 [48/202] installing build-compare-2009.10.14-26.2 [49/202] installing libstdc++-devel-4.5.3-1.3 [50/202] installing eglibc-headers-2.13-1.8 [51/202] installing eina-devel-1.7.1+svn.77445+build01r01-1.2 [52/202] installing fribidi-devel-0.19.5-5.1 [53/202] installing libcap-2.21-1.2 [54/202] installing liblua-devel-5.1.4-6.2 [55/202] installing pixman-devel-0.26.0-8.1 [56/202] installing unzip-6.0-9.3 [57/202] installing zlib-devel-1.2.5-2.8 [58/202] installing c-ares-1.7.4-1.2 [59/202] installing embryo-1.7.1+svn.76491+build01r01-1.1 [60/202] installing freetype-2.4.9-2.1 [61/202] installing glib2-2.28.6-1.1 [62/202] installing gmp-5.0.1-1.2 [63/202] installing libacl-2.2.49-1.2 [64/202] installing libfile-5.04-1.2 [65/202] installing libpcre-7.9-1.3 [66/202] installing libpng-1.2.50-1.1 [67/202] installing libxcb-1.8.1-1.1 [68/202] installing lzo-minilzo-2.03-1.1 [69/202] installing make-3.82-152.2 [70/202] installing ncurses-5.7-4.2 [71/202] installing openssl-1.0.1c-1.9 [72/202] installing binutils-2.22-1.2 [73/202] installing bzip2-1.0.5-4.2 [74/202] installing libSM-1.2.1-1.1 [75/202] installing libblkid-2.20.2-1.1 [76/202] installing libicu-4.8-1.1 [77/202] installing xz-5.0.3-1.2 [78/202] installing eet-1.7.1+svn.77495+build01r01-1.1 [79/202] installing elfutils-libs-0.152-1.8 [80/202] installing nss-3.12.9-5.9 [81/202] installing perl-5.12.1-61.3 [82/202] installing ncurses-base-5.7-4.2 [83/202] installing perl-HTML-Tagset-3.20-8.1 [84/202] installing perl-IO-Compress-Base-2.008-61.3 [85/202] installing perl-Module-Pluggable-3.60-61.3 [86/202] installing perl-Pod-Escapes-1.04-61.3 [87/202] installing perl-TimeDate-1.20-1.1 [88/202] installing eglibc-devel-2.13-1.8 [89/202] installing embryo-devel-1.7.1+svn.76491+build01r01-1.1 [90/202] installing grep-2.5.1a-63.1 [91/202] installing lzo-devel-2.03-1.1 [92/202] installing mpfr-3.0.0-1.2 [93/202] installing perl-Compress-Raw-Zlib-2.008-61.3 [94/202] installing perl-devel-5.12.1-61.3 [95/202] installing perl-libs-5.12.1-61.3 [96/202] installing tar-1.17-3.2 [97/202] installing coreutils-6.9-9.4 [98/202] installing ecore-1.7.1+svn.77580+build01r01-2.1 [99/202] installing eet-devel-1.7.1+svn.77495+build01r01-1.1 [100/202] installing file-5.04-1.2 [101/202] installing freetype-devel-2.4.9-2.1 [102/202] installing libX11-1.5.0-2.1 [103/202] installing libmount-2.20.2-1.1 [104/202] installing xz-lzma-compat-5.0.3-1.2 [105/202] installing elfutils-0.152-1.8 [106/202] installing nss-sysinit-3.12.9-5.9 [107/202] installing libcurl-7.21.3-1.2 [108/202] installing perl-ExtUtils-ParseXS-2.18-61.3 [109/202] installing perl-Pod-Simple-3.07-61.3 [110/202] installing perl-Test-Simple-0.80-61.3 [111/202] installing tizen-accelerator-1.0.1-1.1 [112/202] installing libXcomposite-0.4.3-3.1 [113/202] installing libXext-1.3.1-1.1 [114/202] installing libXfixes-5.0-2.1 [115/202] installing libXrender-0.9.7-1.1 [116/202] installing libidn-devel-1.15-1.2 [117/202] installing perl-IO-Compress-Zlib-2.008-61.3 [118/202] installing perl-Test-Harness-3.12-61.3 [119/202] installing gawk-3.1.5-2.1 [120/202] installing gzip-1.3.14-2.1 [121/202] installing mpc-0.9-1.1 [122/202] installing build-2011.01.10a-1.1 [123/202] installing ecore-imf-1.7.1+svn.77580+build01r01-2.1 [124/202] installing ecore-input-1.7.1+svn.77580+build01r01-2.1 [125/202] installing giflib-4.1.6-13.1 [126/202] installing curl-7.21.3-1.2 [127/202] installing ecore-con-1.7.1+svn.77580+build01r01-2.1 [128/202] installing glib2-devel-2.28.6-1.1 [129/202] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [130/202] installing fontconfig-2.9.0-2.1 [131/202] installing bzip2-libs-x86-arm-1.0.5-8.1 [132/202] installing eglibc-x86-arm-2.13-8.2 [133/202] installing elfutils-libelf-x86-arm-0.152-8.1 [134/202] installing elfutils-libs-x86-arm-0.152-8.2 [135/202] installing fontconfig-devel-2.9.0-2.1 [136/202] installing gmp-x86-arm-5.0.1-8.1 [137/202] installing libacl-x86-arm-2.2.49-8.1 [138/202] installing libattr-x86-arm-2.4.44-8.1 [139/202] installing libcap-x86-arm-2.21-8.1 [140/202] installing libfile-x86-arm-5.04-8.1 [141/202] installing libgcc-x86-arm-4.5.3-8.1 [142/202] installing liblua-x86-arm-5.1.4-8.1 [143/202] installing mpc-x86-arm-0.9-8.1 [144/202] installing mpfr-x86-arm-3.0.0-9.1 [145/202] installing ncurses-libs-x86-arm-5.7-8.1 [146/202] installing nspr-x86-arm-4.9-8.2 [147/202] installing nss-softokn-freebl-x86-arm-3.12.9-8.1 [148/202] installing nss-x86-arm-3.12.9-8.1 [149/202] installing perl-ExtUtils-MakeMaker-6.36-61.3 [150/202] installing popt-x86-arm-1.16-8.1 [151/202] installing sqlite-x86-arm-3.7.9-8.1 [152/202] installing xz-libs-x86-arm-5.0.3-8.1 [153/202] installing zlib-x86-arm-1.2.5-8.1 [154/202] installing libXdamage-1.1.3-3.1 [155/202] installing libXgesture-0.1.0-3.1 [156/202] installing libXi-1.6.1-1.1 [157/202] installing libXinerama-1.1.2-1.1 [158/202] installing libcurl-devel-7.21.3-1.2 [159/202] installing libXcursor-1.1.13-1.1 [160/202] installing libXrandr-1.4.0-3.1 [161/202] installing ecore-fb-1.7.1+svn.77580+build01r01-2.1 [162/202] installing cpp-4.5.3-1.3 [163/202] installing ecore-file-1.7.1+svn.77580+build01r01-2.1 [164/202] installing ecore-ipc-1.7.1+svn.77580+build01r01-2.1 [165/202] installing cairo-1.12.8-2.1 [166/202] installing rpm-4.9.1-4.2 [167/202] installing perl-CPAN-1.9205-61.3 [168/202] installing bash-x86-arm-4.1-8.1 [169/202] installing fdupes-x86-arm-1.40-8.1 [170/202] installing findutils-x86-arm-4.2.31-8.1 [171/202] installing gawk-x86-arm-3.1.5-8.2 [172/202] installing gzip-x86-arm-1.3.14-8.1 [173/202] installing make-x86-arm-3.82-8.1 [174/202] installing sed-x86-arm-4.1.5-8.1 [175/202] installing diffutils-x86-arm-3.0-8.1 [176/202] installing libXtst-1.2.0-3.1 [177/202] installing patch-x86-arm-2.6-8.1 [178/202] installing autoconf-2.68-1.1 [179/202] installing coreutils-x86-arm-6.9-8.1 [180/202] installing file-x86-arm-5.04-8.1 [181/202] installing tar-x86-arm-1.17-8.1 [182/202] installing harfbuzz-0.9.7-1.1 [183/202] installing elfutils-x86-arm-0.152-8.2 [184/202] installing gcc-4.5.3-1.3 [185/202] installing rpm-libs-4.9.1-4.2 [186/202] installing harfbuzz-devel-0.9.7-1.1 [187/202] installing rpm-libs-x86-arm-4.9.1-8.1 [188/202] installing automake-1.11.1-3.1 [189/202] installing gcc-c++-4.5.3-1.3 [190/202] installing evas-1.7.1+svn.77561+build01r01-1.1 [191/202] installing ecore-x-1.7.1+svn.77580+build01r01-2.1 [192/202] installing rpm-build-4.9.1-4.2 [193/202] installing libtool-2.2.6b-1.2 [194/202] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-2.1 [195/202] installing ecore-input-evas-1.7.1+svn.77580+build01r01-2.1 [196/202] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [197/202] installing evas-devel-1.7.1+svn.77561+build01r01-1.1 [198/202] installing rpm-x86-arm-4.9.1-8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [199/202] installing rpm-build-x86-arm-4.9.1-8.1 [200/202] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [201/202] installing ecore-evas-1.7.1+svn.77580+build01r01-2.1 [202/202] installing ecore-devel-1.7.1+svn.77580+build01r01-2.1 now finalizing build dir... /var/run/obs/worker/8/build/build: line 1761: /srv/build/root_8/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for edje.spec: 5c5 < Release: 1 --- > Release: 1.1 ----------------------------------------------------------------- ----- building edje.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/deff3445b1f2108bc7c623f5f7eeed9e-edje' /home/abuild/rpmbuild/SOURCES/edje.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Nw9xVR + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf edje-1.7.1+svn.77330+build01r03 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/edje-1.7.1+svn.77330+build01r03.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd edje-1.7.1+svn.77330+build01r03 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.WwBm9q + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd edje-1.7.1+svn.77330+build01r03 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + export 'CFLAGS+= -fvisibility=hidden -ffast-math -fPIC' + CFLAGS+=' -fvisibility=hidden -ffast-math -fPIC' + export 'LDFLAGS+= -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' + LDFLAGS+=' -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-multisense Running aclocal... aclocal: `configure.ac' and `configure.in' both present. aclocal: proceeding with `configure.ac'. sh: svnversion: command not found Running autoheader... autoheader: `configure.ac' and `configure.in' both present. autoheader: proceeding with `configure.ac' sh: svnversion: command not found Running autoconf... autoconf: warning: both `configure.ac' and `configure.in' are present. autoconf: warning: proceeding with `configure.ac'. Running libtoolize... Running automake... automake: `configure.ac' and `configure.in' both present. automake: proceeding with `configure.ac'. configure.ac:567: installing `./compile' configure.ac:38: installing `./config.guess' configure.ac:38: installing `./config.sub' configure.ac:35: installing `./install-sh' configure.ac:35: installing `./missing' doc/Makefile.am:34: wildcard img/*.*: non-POSIX variable name doc/Makefile.am:34: (probably a GNU make extension) doc/Makefile.am:34: wildcard examples/*.*: non-POSIX variable name doc/Makefile.am:34: (probably a GNU make extension) src/bin/Makefile.am: installing `./depcomp' cmp: config.cache-env: No such file or directory Cleaning configure cache... configure: creating cache config.cache checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... armv7l-unknown-linux-gnueabi checking host system type... armv7l-unknown-linux-gnueabi checking for style of include used by make... GNU checking for armv7l-unknown-linux-gnueabi-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r checking for armv7l-unknown-linux-gnueabi-objdump... objdump checking how to recognize dependent libraries... pass_all checking for armv7l-unknown-linux-gnueabi-ar... no checking for ar... ar checking for armv7l-unknown-linux-gnueabi-strip... no checking for strip... strip checking for armv7l-unknown-linux-gnueabi-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: edje_cc set to /bin/edje_cc configure: edje_codegen set to /bin/edje_codegen checking whether to build edje_cc binary... yes checking whether to build edje_decc binary... yes checking whether to build edje_recc binary... yes checking whether to build edje_player binary... yes checking whether to build edje_inspector binary... yes checking whether to build edje_external_inspector binary... yes checking whether to build edje_watch binary... yes checking whether to build edje_codegen binary... yes checking for location of Vim data files... Not found, EDC syntax file will not be installed checking for armv7l-unknown-linux-gnueabi-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking whether to build documentation... yes checking for doxygen... no WARNING: The doxygen program was not found in your execute path. You may have doxygen installed somewhere not covered by your path. If this is the case make sure you have the packages installed, AND that the doxygen program is in your execute path (see your shell manual page on setting the $PATH environment variable), OR alternatively, specify the program to use with --with-doxygen. configure: WARNING: no doxygen detected. Documentation will not be built checking for a Python interpreter with version >= 2.5... none checking for armv7l-unknown-linux-gnueabi-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LUA... yes checking for MINIMAL... yes checking for EDJE... yes checking for ECORE_IMF... yes checking for EIO... no checking for EDJE_CC... yes checking for EDJE_DECC... yes checking for EDJE_PLAYER... yes checking for EDJE_INSPECTOR... yes checking for EDJE_EXTERNAL_INSPECTOR... yes checking for EDJE_WATCH... no checking for EDJE_CODEGEN... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking for PATH_MAX in limits.h... yes checking whether gcc and cc understand -c and -o together... yes checking for an ANSI C-conforming const... yes checking for gcc option to accept ISO C99... -std=gnu99 checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 checking for ANSI C header files... (cached) yes checking for __attribute__... yes checking for library containing strerror... none required checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for realpath... yes checking whether tests are built... no checking whether to use profiling instrumentation... no configure: updating cache config.cache configure: creating ./config.status config.status: creating edje.pc config.status: creating edje.spec config.status: creating Makefile config.status: creating data/Makefile config.status: creating data/include/Makefile config.status: creating doc/Makefile config.status: creating doc/Doxyfile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/bin/Makefile config.status: creating src/bin/epp/Makefile config.status: creating src/modules/Makefile config.status: creating src/modules/alsa_snd_player/Makefile config.status: creating src/modules/pa_snd_player/Makefile config.status: creating src/modules/eet_snd_reader/Makefile config.status: creating src/modules/multisense_factory/Makefile config.status: creating src/tests/Makefile config.status: creating utils/Makefile config.status: creating src/examples/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands ------------------------------------------------------------------------ edje 1.7.99.0 ------------------------------------------------------------------------ Configuration Options Summary: Amalgamation.........: no Ecore IMF............: yes EIO..................: no EDJE_PROGRAM_CACHE...: no EDJE_CALC_CACHE......: yes Fixed point..........: no Documentation........: no Tests................: no Coverage.............: no Examples.............: install: build:no Programs: Build edje_cc................: yes Build edje_decc..............: yes Build edje_recc..............: yes Build edje_player............: yes Build edje_inspector.........: yes Build edje_external_inspector: yes Build edje_watch.............: no Build edje_codegen...........: yes Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-multisense checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking build system type... armv7l-unknown-linux-gnueabi checking host system type... armv7l-unknown-linux-gnueabi checking for style of include used by make... GNU checking for armv7l-unknown-linux-gnueabi-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r checking for armv7l-unknown-linux-gnueabi-objdump... objdump checking how to recognize dependent libraries... pass_all checking for armv7l-unknown-linux-gnueabi-ar... no checking for ar... ar checking for armv7l-unknown-linux-gnueabi-strip... no checking for strip... strip checking for armv7l-unknown-linux-gnueabi-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: edje_cc set to /bin/edje_cc configure: edje_codegen set to /bin/edje_codegen checking whether to build edje_cc binary... yes checking whether to build edje_decc binary... yes checking whether to build edje_recc binary... yes checking whether to build edje_player binary... yes checking whether to build edje_inspector binary... yes checking whether to build edje_external_inspector binary... yes checking whether to build edje_watch binary... yes checking whether to build edje_codegen binary... yes checking for location of Vim data files... Not found, EDC syntax file will not be installed checking for armv7l-unknown-linux-gnueabi-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking whether to build documentation... yes checking for doxygen... no WARNING: The doxygen program was not found in your execute path. You may have doxygen installed somewhere not covered by your path. If this is the case make sure you have the packages installed, AND that the doxygen program is in your execute path (see your shell manual page on setting the $PATH environment variable), OR alternatively, specify the program to use with --with-doxygen. configure: WARNING: no doxygen detected. Documentation will not be built checking for a Python interpreter with version >= 2.5... none checking for armv7l-unknown-linux-gnueabi-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for LUA... yes checking for MINIMAL... yes checking for EDJE... yes checking for ECORE_IMF... yes checking for EIO... no checking for EDJE_CC... yes checking for EDJE_DECC... yes checking for EDJE_PLAYER... yes checking for EDJE_INSPECTOR... yes checking for EDJE_EXTERNAL_INSPECTOR... yes checking for EDJE_WATCH... no checking for EDJE_CODEGEN... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking for PATH_MAX in limits.h... yes checking whether gcc and cc understand -c and -o together... yes checking for an ANSI C-conforming const... yes checking for gcc option to accept ISO C99... -std=gnu99 checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 checking for ANSI C header files... (cached) yes checking for __attribute__... yes checking for library containing strerror... none required checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for realpath... yes checking whether tests are built... no checking whether to use profiling instrumentation... no configure: creating ./config.status config.status: creating edje.pc config.status: creating edje.spec config.status: creating Makefile config.status: creating data/Makefile config.status: creating data/include/Makefile config.status: creating doc/Makefile config.status: creating doc/Doxyfile config.status: creating src/Makefile config.status: creating src/lib/Makefile config.status: creating src/bin/Makefile config.status: creating src/bin/epp/Makefile config.status: creating src/modules/Makefile config.status: creating src/modules/alsa_snd_player/Makefile config.status: creating src/modules/pa_snd_player/Makefile config.status: creating src/modules/eet_snd_reader/Makefile config.status: creating src/modules/multisense_factory/Makefile config.status: creating src/tests/Makefile config.status: creating utils/Makefile config.status: creating src/examples/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands ------------------------------------------------------------------------ edje 1.7.99.0 ------------------------------------------------------------------------ Configuration Options Summary: Amalgamation.........: no Ecore IMF............: yes EIO..................: no EDJE_PROGRAM_CACHE...: no EDJE_CALC_CACHE......: yes Fixed point..........: no Documentation........: no Tests................: no Coverage.............: no Examples.............: install: build:no Programs: Build edje_cc................: yes Build edje_decc..............: yes Build edje_recc..............: yes Build edje_player............: yes Build edje_inspector.........: yes Build edje_external_inspector: yes Build edje_watch.............: no Build edje_codegen...........: yes Compilation............: make (or gmake) CPPFLAGS.............: CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -ffast-math -fPIC LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed Installation...........: make install (as root if needed, with 'su' or 'sudo') prefix...............: /usr + make -j4 make all-recursive make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' Making all in data make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' Making all in include make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data/include' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data/include' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' Making all in src make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' Making all in lib make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/lib' CC edje_box_layout.lo CC edje_cache.lo CC edje_calc.lo CC edje_callbacks.lo CC edje_container.lo CC edje_data.lo CC edje_edit.lo CC edje_embryo.lo CC edje_entry.lo edje_entry.c:486:1: warning: '_curs_back' defined but not used edje_entry.c:493:1: warning: '_curs_next' defined but not used CC edje_external.lo CC edje_load.lo CC edje_lua.lo CC edje_lua2.lo CC edje_lua_script_only.lo CC edje_main.lo CC edje_match.lo CC edje_message_queue.lo CC edje_misc.lo CC edje_module.lo CC edje_multisense.lo CC edje_program.lo CC edje_script_only.lo CC edje_smart.lo CC edje_text.lo CC edje_textblock_styles.lo CC edje_util.lo edje_util.c: In function 'edje_object_part_text_copy_paste_disabled_set': edje_util.c:1708:6: warning: implicit declaration of function '_edje_entry_copy_paste_disabled_set' edje_util.c: In function 'edje_object_part_text_viewport_region_set': edje_util.c:1723:6: warning: implicit declaration of function '_edje_entry_viewport_region_set' edje_util.c: In function 'edje_object_part_text_layout_region_set': edje_util.c:1738:6: warning: implicit declaration of function '_edje_entry_layout_region_set' CC edje_var.lo CCLD libedje.la make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/lib' Making all in bin make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' Making all in epp make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin/epp' CC epp-cpperror.o CC epp-cppalloc.o CC epp-cppexp.o CC epp-cpphash.o CC epp-cpplib.o CC epp-cppmain.o CCLD epp make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin/epp' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' CC edje_cc-edje_cc.o CC edje_cc-edje_cc_out.o CC edje_cc-edje_cc_parse.o CC edje_cc-edje_cc_mem.o CC edje_cc-edje_cc_handlers.o CC edje_cc-edje_cc_sources.o CC edje_cc-edje_multisense_convert.o CC edje_decc-edje_decc.o CC edje_decc-edje_cc_mem.o CC edje_decc-edje_cc_sources.o CC edje_player-edje_player.o CC edje_inspector-edje_inspector.o CC edje_external_inspector-edje_external_inspector.o CC edje_codegen-edje_codegen.o edje_codegen.c: In function '_parse_parts': edje_codegen.c:777:23: warning: unused variable 'typename' CCLD edje_decc CCLD edje_player edje_codegen.c: In function 'main': edje_codegen.c:1084:10: warning: 'source' may be used uninitialized in this function edje_codegen.c:1084:19: warning: 'header' may be used uninitialized in this function CCLD edje_external_inspector CCLD edje_cc CCLD edje_codegen CCLD edje_inspector make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' Making all in modules make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' Making all in tests make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/tests' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/tests' Making all in examples make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make all-am make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' Making all in utils make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/utils' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/utils' Making all in doc make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/doc' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/doc' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.SMvlU0 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd edje-1.7.1+svn.77330+build01r03 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm install Making install in data make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' Making install in include make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data/include' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data/include' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/share/edje/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/edje/include" /usr/bin/install -c -m 644 edje.inc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/edje/include' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data/include' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data/include' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/share/mime/packages" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/mime/packages" /usr/bin/install -c -m 644 edje.xml '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/mime/packages' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/data' Making install in src make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' Making install in lib make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/lib' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/lib' test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib" /bin/sh ../../libtool --mode=install /usr/bin/install -c libedje.la '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib' libtool: install: /usr/bin/install -c .libs/libedje.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/libedje.so.1.7.99 libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib && { ln -s -f libedje.so.1.7.99 libedje.so.1 || { rm -f libedje.so.1 && ln -s libedje.so.1.7.99 libedje.so.1; }; }) libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib && { ln -s -f libedje.so.1.7.99 libedje.so || { rm -f libedje.so && ln -s libedje.so.1.7.99 libedje.so; }; }) libtool: install: /usr/bin/install -c .libs/libedje.lai /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/libedje.la libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/include/edje-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/include/edje-1" /usr/bin/install -c -m 644 Edje.h Edje_Edit.h '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/include/edje-1' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/lib' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/lib' Making install in bin make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' Making install in epp make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin/epp' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin/epp' make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/edje/utils" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/edje/utils" /bin/sh ../../../libtool --mode=install /usr/bin/install -c epp '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/edje/utils' libtool: install: /usr/bin/install -c epp /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/edje/utils/epp make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin/epp' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin/epp' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin" /bin/sh ../../libtool --mode=install /usr/bin/install -c edje_cc edje_decc edje_player edje_inspector edje_external_inspector edje_codegen '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin' libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/edje_cc /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_cc libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/edje_decc /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_decc libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/edje_player /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_player libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/edje_inspector /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_inspector libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/edje_external_inspector /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_external_inspector libtool: install: warning: `../../src/lib/libedje.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/edje_codegen /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_codegen test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin" /usr/bin/install -c edje_recc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin' make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/bin' Making install in modules make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/modules' Making install in tests make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/tests' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/tests' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/tests' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/tests' Making install in examples make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' /usr/bin/make install-am make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/share/edje/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/edje/examples" test -z "/usr/share/edje/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/edje/examples" /usr/bin/install -c -m 644 basic.edc swallow.edc text.edc table.edc box.edc codegen.edc drag.edc edje_example.edc embryo_custom_state.edc embryo_pong.edc embryo_run_program.edc embryo_set_state.edc embryo_set_text.edc embryo_timer.edc external_elm_anchorblock.edc external_elm_button.edc external_elm_check.edc external_elm_panes.edc external_emotion_elm.edc toggle_using_filter.edc signals-messages.edc color-class.edc perspective.edc animations.edc lua_script.edc sigtest.edc animations2.edc basic2.edc signalsBubble.edc bubble.png red.png test.png Vera.ttf duck.wav edje-codegen-example.c edje_example.c edje-basic.c edje-swallow.c edje-text.c edje-table.c '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/edje/examples' /usr/bin/install -c -m 644 edje-box.c edje-box2.c edje-drag.c edje-signals-messages.c edje-color-class.c edje-perspective.c edje-animations.c sigtest.c animations2.c edje-basic2.c signals2.c edje-swallow2.c '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/edje/examples' make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src/examples' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/src' Making install in utils make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/utils' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/utils' test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin" make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/utils' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/utils' Making install in doc make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/doc' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/doc' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/doc' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/doc' make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin" test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/pkgconfig" /usr/bin/install -c -m 644 edje.pc '/home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/pkgconfig' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03' + rm -f /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm -regex '.*\.a$' + xargs rm -f -- + mkdir -p /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/license + cp /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03/COPYING /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/share/license/edje + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/edje-1.7.1+svn.77330+build01r03 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_cc extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_codegen extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_decc extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_external_inspector extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_inspector extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/bin/edje_player extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/edje/utils/epp extracting debug info from /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm/usr/lib/libedje.so.1.7.99 symlinked /usr/lib/debug/usr/lib/libedje.so.1.7.99.debug to /usr/lib/debug/usr/lib/libedje.so.debug symlinked /usr/lib/debug/usr/lib/libedje.so.1.7.99.debug to /usr/lib/debug/usr/lib/libedje.so.1.debug 4735 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm Processing files: edje-1.7.1+svn.77330+build01r03-1.1.armv7l Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libedje.so.1 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libecore_imf.so.1 libecore_imf_evas.so.1 libecore_input.so.1 libeet.so.1 libeina.so.1 libembryo.so.1 libevas.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblua-5.1.so libm.so.6 libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 Processing files: edje-devel-1.7.1+svn.77330+build01r03-1.1.armv7l Provides: pkgconfig(edje) = 1.7.99.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libedje.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(ecore-evas) >= 1.6.99 pkgconfig(ecore-imf) >= 1.6.99 pkgconfig(ecore-imf-evas) >= 1.6.99 pkgconfig(eet) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(embryo) >= 1.6.99 pkgconfig(evas) >= 1.6.99 pkgconfig(lua) Processing files: edje-tools-1.7.1+svn.77330+build01r03-1.1.armv7l Provides: edje-bin Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /bin/sh ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libedje.so.1 libeet.so.1 libeina.so.1 libevas.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblua-5.1.so libm.so.6 libm.so.6(GLIBC_2.4) libpthread.so.0 libpthread.so.0(GLIBC_2.4) Obsoletes: edje-bin Processing files: edje-debuginfo-1.7.1+svn.77330+build01r03-1.1.armv7l Processing files: edje-debugsource-1.7.1+svn.77330+build01r03-1.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/edje-1.7.1+svn.77330+build01r03-1.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-1.7.1+svn.77330+build01r03-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-devel-1.7.1+svn.77330+build01r03-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-tools-1.7.1+svn.77330+build01r03-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-debuginfo-1.7.1+svn.77330+build01r03-1.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/edje-debugsource-1.7.1+svn.77330+build01r03-1.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3xrlRt + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd edje-1.7.1+svn.77330+build01r03 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/edje-1.7.1+svn.77330+build01r03-1.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w20 finished "build edje.spec" at Fri Feb 15 21:51:49 UTC 2013. Retried build at Fri Feb 15 14:21:42 2013 returned same result, skipped Retried build at Sat Feb 16 20:19:44 2013 returned same result, skipped Retried build at Sun Feb 17 00:09:33 2013 returned same result, skipped Retried build at Sun Feb 17 07:11:33 2013 returned same result, skipped