Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_8 Using BUILD_ARCH=armv7el w21 started "build ise-engine-default.spec" at Sat Feb 16 11:28:12 UTC 2013. Building ise-engine-default for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 'f481643c1d23d1a48ea16f819a28c1a1' processing specfile /srv/build/root_8/.build-srcdir/ise-engine-default.spec ... running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/ise-engine-default.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/ise-engine-default.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: pkgmgr-info -> pkgmgr-info-parser breaking dependency pkgmgr-info-parser -> pkgmgr-info cycle: syspopup-caller -> syspopup breaking dependency syspopup -> syspopup-caller cycle: pkgmgr-client -> pkgmgr-installer -> pkgmgr breaking dependency pkgmgr -> pkgmgr-client cycle: pkgmgr-installer -> pkgmgr breaking dependency pkgmgr -> pkgmgr-installer cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/266] [2/266] installing kernel-headers-2.6.36-1.1 [3/266] installing libX11-common-1.5.0-2.1 [4/266] installing opengl-es-virtual-drv-0.1.3-10.1 [5/266] installing tizen-release-2.0.0-1.1 [6/266] installing tzdata-2011h-1.1 [7/266] installing libgcc-4.5.3-1.3 [8/266] installing setup-0.1-1.1 [9/266] installing filesystem-0.1-1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [10/266] installing eglibc-2.13-1.8 [11/266] installing eglibc-common-2.13-1.8 warning: %post(eglibc-common-2.13-1.8.armv7l) scriptlet failed, exit status 255 [12/266] installing iniparser-2.17-3.1 [13/266] installing bash-4.1-3.1 [14/266] installing bzip2-libs-1.0.5-4.2 [15/266] installing cpio-2.8-3.1 [16/266] installing diffutils-3.0-3.1 [17/266] installing e2fsprogs-libs-1.41.9-2.2 [18/266] installing eina-1.7.1+svn.77445+build01r01-1.2 [19/266] installing elfutils-libelf-0.152-1.8 [20/266] installing expat-2.0.1-8.2 [21/266] installing fdupes-1.40-42.1 [22/266] installing findutils-4.2.31-1.1 [23/266] installing fribidi-0.19.5-5.1 [24/266] installing gdbm-1.8.3-2.1 [25/266] installing kmod-5-2.1 [26/266] installing libICE-1.0.8-1.1 [27/266] installing libXau-1.0.7-1.1 [28/266] installing libasound-1.0.24.1-1.1 [29/266] installing libattr-2.4.44-7.4 [30/266] installing libdrm2-2.4.35-11.1 [31/266] installing libexif-0.6.21-4.1 [32/266] installing libffi-3.0.9-100.1 [33/266] installing libgomp-4.5.3-1.3 [34/266] installing libidn-1.15-1.2 [35/266] installing libiri-1.1-1.1 [36/266] installing libjpeg-turbo-1.2.0-7.1 [37/266] installing liblua-5.1.4-6.2 [38/266] installing libogg-1.2.1-3.1 [39/266] installing libslp-pm-1.2.5-1.1 [40/266] installing libstdc++-4.5.3-1.3 [41/266] installing libuuid-2.20.2-1.1 [42/266] installing lzo-2.03-1.1 [43/266] installing m4-1.4.14-1.1 [44/266] installing net-tools-1.60-88.1 [45/266] installing nspr-4.9-1.5 [46/266] installing nss-softokn-freebl-3.12.9-5.9 [47/266] installing patch-2.6-1.1 [48/266] installing pixman-0.26.0-8.1 [49/266] installing pkgconfig-0.25-2.2 [50/266] installing popt-1.16-3.2 [51/266] installing readline-5.2-13.1 [52/266] installing sed-4.1.5-2.1 [53/266] installing smack-1.0slp2+s7-1.2 [54/266] installing sqlite-3.7.13-1.1 [55/266] installing xz-libs-5.0.3-1.2 [56/266] installing zlib-1.2.5-2.8 [57/266] installing ncurses-libs-5.7-4.2 [58/266] installing build-compare-2009.10.14-26.2 [59/266] installing libstdc++-devel-4.5.3-1.3 [60/266] installing eglibc-headers-2.13-1.8 [61/266] installing libcap-2.21-1.2 [62/266] installing unzip-6.0-9.3 [63/266] installing zlib-devel-1.2.5-2.8 [64/266] installing c-ares-1.7.4-1.2 [65/266] installing embryo-1.7.1+svn.76491+build01r01-1.1 [66/266] installing freetype-2.4.9-2.1 [67/266] installing gmp-5.0.1-1.2 [68/266] installing libacl-2.2.49-1.2 [69/266] installing libdlog-0.4.1-3.1 [70/266] installing libdrm-slp1-2.4.35-11.1 [71/266] installing libfile-5.04-1.2 [72/266] installing libpcre-7.9-1.3 [73/266] installing libpng-1.2.50-1.1 [74/266] installing libtheora-1.1.1-4.1 [75/266] installing libvorbis-1.2.3-3.1 [76/266] installing libxcb-1.8.1-1.1 [77/266] installing libxml2-2.7.8-8.3 [78/266] installing lzo-minilzo-2.03-1.1 [79/266] installing make-3.82-152.2 [80/266] installing ncurses-5.7-4.2 [81/266] installing openssl-1.0.1c-1.9 [82/266] installing binutils-2.22-1.2 [83/266] installing bzip2-1.0.5-4.2 [84/266] installing glib2-2.32.3-5.1 [85/266] installing libSM-1.2.1-1.1 [86/266] installing libblkid-2.20.2-1.1 [87/266] installing libicu-4.8-1.1 [88/266] installing libprivilege-control-0.0.19-1.1 ln: creating symbolic link `/lib/udev/rules.d/95-permissions-slp.rules': No such file or directory warning: %post(libprivilege-control-0.0.19-1.1.armv7l) scriptlet failed, exit status 1 [89/266] installing xz-5.0.3-1.2 [90/266] installing eet-1.7.1+svn.77495+build01r01-1.1 [91/266] installing elfutils-libs-0.152-1.8 [92/266] installing nss-3.12.9-5.9 [93/266] installing perl-5.12.1-61.3 [94/266] installing ncurses-base-5.7-4.2 [95/266] installing perl-HTML-Tagset-3.20-8.1 [96/266] installing perl-IO-Compress-Base-2.008-61.3 [97/266] installing perl-Module-Pluggable-3.60-61.3 [98/266] installing perl-Pod-Escapes-1.04-61.3 [99/266] installing perl-TimeDate-1.20-1.1 [100/266] installing eglibc-devel-2.13-1.8 [101/266] installing grep-2.5.1a-63.1 [102/266] installing lzo-devel-2.03-1.1 [103/266] installing mpfr-3.0.0-1.2 [104/266] installing perl-Compress-Raw-Zlib-2.008-61.3 [105/266] installing perl-devel-5.12.1-61.3 [106/266] installing perl-libs-5.12.1-61.3 [107/266] installing tar-1.17-3.2 [108/266] installing bundle-0.1.27-1.2 [109/266] installing coreutils-6.9-9.4 [110/266] installing ecore-1.7.1+svn.77580+build01r01-2.2 [111/266] installing file-5.04-1.2 [112/266] installing gstreamer-0.10.36-5.2 [113/266] installing libX11-1.5.0-2.1 [114/266] installing libmount-2.20.2-1.1 [115/266] installing libsf-common-0.3.18-1.1 [116/266] installing xz-lzma-compat-5.0.3-1.2 [117/266] installing app-checker-0.0.16-1.2 [118/266] installing elfutils-0.152-1.8 [119/266] installing heynoti-0.0.2-39.2 [120/266] installing nss-sysinit-3.12.9-5.9 [121/266] installing shared-mime-info-0.60-4.2 [122/266] installing libcurl-7.21.3-1.2 [123/266] installing libsoup2.4-2.38.1_0.1.1-1.1 [124/266] installing libslp-db-util-0.1.1-4.2 [125/266] installing perl-ExtUtils-ParseXS-2.18-61.3 [126/266] installing perl-Pod-Simple-3.07-61.3 [127/266] installing perl-Test-Simple-0.80-61.3 [128/266] installing tizen-accelerator-1.0.1-1.1 [129/266] installing libXcomposite-0.4.3-3.1 [130/266] installing libXext-1.3.1-1.1 [131/266] installing libXfixes-5.0-2.1 [132/266] installing libXrender-0.9.7-1.1 [133/266] installing perl-IO-Compress-Zlib-2.008-61.3 [134/266] installing perl-Test-Harness-3.12-61.3 [135/266] installing gawk-3.1.5-2.1 [136/266] installing gzip-1.3.14-2.1 [137/266] installing mpc-0.9-1.1 [138/266] installing pam-1.1.5-2.1 [139/266] installing xdgmime-0.0.12-2.1 chown: `root:root': invalid user [140/266] installing app-checker-server-0.0.16-1.2 [141/266] installing build-2011.01.10a-1.1 [142/266] installing ecore-imf-1.7.1+svn.77580+build01r01-2.2 [143/266] installing ecore-input-1.7.1+svn.77580+build01r01-2.2 [144/266] installing eio-1.7.1+svn.77392+build01r01-1.1 [145/266] installing giflib-4.1.6-13.1 [146/266] installing curl-7.21.3-1.2 [147/266] installing dbus-1.6.4-4.1 warning: group dbus does not exist - using root [148/266] installing ecore-con-1.7.1+svn.77580+build01r01-2.2 [149/266] installing util-linux-2.20.2-1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [150/266] installing app2sd-0.5-8.2 [151/266] installing fontconfig-2.9.0-2.1 [152/266] installing librua-0.1.0-34.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.rua.db': No such file or directory chown: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory /var/tmp/rpm-tmp.XkajAe: line 9: chsmack: command not found /var/tmp/rpm-tmp.XkajAe: line 10: chsmack: command not found warning: %post(librua-0.1.0-34.1.armv7l) scriptlet failed, exit status 127 [153/266] installing bzip2-libs-x86-arm-1.0.5-8.1 [154/266] installing dbus-libs-1.6.4-4.1 [155/266] installing eglibc-x86-arm-2.13-8.2 [156/266] installing elfutils-libelf-x86-arm-0.152-8.1 [157/266] installing elfutils-libs-x86-arm-0.152-8.2 [158/266] installing gmp-x86-arm-5.0.1-8.1 [159/266] installing libacl-x86-arm-2.2.49-8.1 [160/266] installing libattr-x86-arm-2.4.44-8.1 [161/266] installing libcap-x86-arm-2.21-8.1 [162/266] installing libfile-x86-arm-5.04-8.1 [163/266] installing libgcc-x86-arm-4.5.3-8.1 [164/266] installing liblua-x86-arm-5.1.4-8.1 [165/266] installing mpc-x86-arm-0.9-8.1 [166/266] installing mpfr-x86-arm-3.0.0-9.1 [167/266] installing ncurses-libs-x86-arm-5.7-8.1 [168/266] installing nspr-x86-arm-4.9-8.2 [169/266] installing nss-softokn-freebl-x86-arm-3.12.9-8.1 [170/266] installing nss-x86-arm-3.12.9-8.1 [171/266] installing perl-ExtUtils-MakeMaker-6.36-61.3 [172/266] installing popt-x86-arm-1.16-8.1 [173/266] installing sqlite-x86-arm-3.7.9-8.1 [174/266] installing xz-libs-x86-arm-5.0.3-8.1 [175/266] installing zlib-x86-arm-1.2.5-8.1 [176/266] installing libXdamage-1.1.3-3.1 [177/266] installing libXgesture-0.1.0-3.1 [178/266] installing libXi-1.6.1-1.1 [179/266] installing libXinerama-1.1.2-1.1 [180/266] installing libXv-1.0.7-1.1 [181/266] installing libdri2-0.1.0-11.1 [182/266] installing libXcursor-1.1.13-1.1 [183/266] installing libXrandr-1.4.0-3.1 [184/266] installing ecore-fb-1.7.1+svn.77580+build01r01-2.2 [185/266] installing cpp-4.5.3-1.3 [186/266] installing ecore-file-1.7.1+svn.77580+build01r01-2.2 [187/266] installing ecore-ipc-1.7.1+svn.77580+build01r01-2.2 [188/266] installing cairo-1.12.8-2.2 [189/266] installing rpm-4.9.1-4.2 [190/266] installing perl-CPAN-1.9205-61.3 [191/266] installing bash-x86-arm-4.1-8.1 [192/266] installing dbus-glib-0.100-4.2 [193/266] installing fdupes-x86-arm-1.40-8.1 [194/266] installing findutils-x86-arm-4.2.31-8.1 [195/266] installing gawk-x86-arm-3.1.5-8.2 [196/266] installing gzip-x86-arm-1.3.14-8.1 [197/266] installing make-x86-arm-3.82-8.1 [198/266] installing sed-x86-arm-4.1.5-8.1 [199/266] installing diffutils-x86-arm-3.0-8.1 [200/266] installing libXtst-1.2.0-3.1 [201/266] installing patch-x86-arm-2.6-8.1 [202/266] installing autoconf-2.68-1.1 [203/266] installing coreutils-x86-arm-6.9-8.1 [204/266] installing efreet-1.7.1+svn.77412+build01r01-2.1 [205/266] installing file-x86-arm-5.04-8.1 [206/266] installing tar-x86-arm-1.17-8.1 [207/266] installing harfbuzz-0.9.7-1.2 [208/266] installing pango-1.26.1-5.2 (pango-querymodules:32349): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) [209/266] installing elfutils-x86-arm-0.152-8.2 [210/266] installing systemd-43-1.1 [211/266] installing libslp-utilx-0.1.16-1.1 [212/266] installing gcc-4.5.3-1.3 [213/266] installing rpm-libs-4.9.1-4.2 [214/266] installing rpm-libs-x86-arm-4.9.1-8.1 [215/266] installing automake-1.11.1-3.1 [216/266] installing vconf-0.2.32-1.2 Running in chroot, ignoring request. [217/266] installing udev-182-6.2 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [218/266] installing gcc-c++-4.5.3-1.3 [219/266] installing evas-1.7.1+svn.77561+build01r01-1.2 [220/266] installing ecore-x-1.7.1+svn.77580+build01r01-2.2 [221/266] installing gst-plugins-base-0.10.36-21.2 [222/266] installing rpm-build-4.9.1-4.2 [223/266] installing libudev-182-6.2 [224/266] installing libtool-2.2.6b-1.2 [225/266] installing capi-system-runtime-info-0.0.2-1.2 [226/266] installing sensor-0.5.26-1.2 [227/266] installing sysman-0.2.29-1.1 [228/266] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-2.2 [229/266] installing ecore-input-evas-1.7.1+svn.77580+build01r01-2.2 [230/266] installing libwifi-direct-0.3.4-1.2 [231/266] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [232/266] installing ail-0.2.55-1.2 [AIL_INITDB][D][main,214] AIL_INITDB : 0 open log dev is failed [AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory [AIL_INITDB][E][main,224] cannot load opt desktop directory. /var/tmp/rpm-tmp.wSp6UW: line 23: chsmack: command not found warning: %post(ail-0.2.55-1.2.armv7l) scriptlet failed, exit status 127 [233/266] installing pkgmgr-info-parser-0.0.54-1.2 [234/266] installing rpm-x86-arm-4.9.1-8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [235/266] installing rpm-build-x86-arm-4.9.1-8.1 [236/266] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [237/266] installing pkgmgr-info-0.0.54-1.2 [238/266] installing ecore-evas-1.7.1+svn.77580+build01r01-2.2 [239/266] installing edbus-1.7.1+svn.76526+build01r01-1.1 [240/266] installing edje-1.7.1+svn.77330+build01r03-1.1 [241/266] installing aul-0.0.240-1.2 warning: group app does not exist - using root warning: group app does not exist - using root Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [242/266] installing ethumb-1.7.1+svn.75994+build01r01-1.1 [243/266] installing emotion-1.7.1+svn.76438+build01r01-1.2 [244/266] installing app-core-common-1.2-41.1 [245/266] installing app-svc-0.1.42-1.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.appsvc.db': No such file or directory chown: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.appsvc.db': No such file or directory chmod: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory /var/tmp/rpm-tmp.ry8BEV: line 11: chsmack: command not found /var/tmp/rpm-tmp.ry8BEV: line 12: chsmack: command not found warning: %post(app-svc-0.1.42-1.1.armv7l) scriptlet failed, exit status 127 [246/266] installing notification-0.1.6-1.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.notification.db': No such file or directory chown: cannot access `/opt/dbspace/.notification.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.notification.db': No such file or directory chmod: cannot access `/opt/dbspace/.notification.db-journal': No such file or directory /var/tmp/rpm-tmp.Gc64sR: line 90: chsmack: command not found open log dev is failed [247/266] installing elementary-1.7.1+svn.77535+build01r05-1.1 [248/266] installing e17-1.0.0.001+svn.76808slp2+build06-1.1 [249/266] installing app-core-efl-1.2-41.1 [250/266] installing wrt-commons-0.2.93-1.1 This is new install of wrt-commons Calling /usr/bin/wrt_commons_reset_db.sh /opt/dbspace/.wrt.db doesn't exist sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.wrt.db': No such file or directory chmod: cannot access `/opt/dbspace/.wrt.db': No such file or directory /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.wrt_autosave.db': No such file or directory chmod: cannot access `/opt/dbspace/.wrt_autosave.db': No such file or directory /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.wrt_custom_handler.db': No such file or directory chmod: cannot access `/opt/dbspace/.wrt_custom_handler.db': No such file or directory /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found Creating machine-id /var/tmp/rpm-tmp.V6J7hz: line 56: chsmack: command not found /var/tmp/rpm-tmp.V6J7hz: line 57: chsmack: command not found /var/tmp/rpm-tmp.V6J7hz: line 58: chsmack: command not found /var/tmp/rpm-tmp.V6J7hz: line 59: chsmack: command not found /var/tmp/rpm-tmp.V6J7hz: line 60: chsmack: command not found /var/tmp/rpm-tmp.V6J7hz: line 61: chsmack: command not found [WRT] wrt-commons postinst done ... [251/266] installing syspopup-0.0.86-1.1 sqlite3: Error: cannot locate your home directory warning: %post(syspopup-0.0.86-1.1.armv7l) scriptlet failed, exit status 1 [252/266] installing pkgmgr-0.2.28-2.1 getpwuid_r(): failed due to unknown user id (0) [253/266] installing pkgmgr-installer-0.2.28-2.1 [254/266] installing syspopup-caller-0.0.86-1.1 [255/266] installing security-server-0.0.61-1.1 This is new install of wrt-security Calling /usr/bin/wrt_security_create_clean_db.sh sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.ace.db': No such file or directory chmod: cannot access `/opt/dbspace/.ace.db': No such file or directory [WRT] wrt-security postinst done ... [256/266] installing libsecurity-server-client-0.0.61-1.1 [257/266] installing pkgmgr-client-0.2.28-2.1 [258/266] installing libslp-tapi-0.6.59-1.1 [259/266] installing alarm-server-0.4.65-1.1 open log dev is failed open log dev is failed Running in chroot, ignoring request. Running in chroot, ignoring request. [260/266] installing capi-appfw-app-manager-0.1.0-20.1 [261/266] installing net-config-0.1.90_16-1.1 open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed Running in chroot, ignoring request. Running in chroot, ignoring request. [262/266] installing libalarm-0.4.65-1.1 [263/266] installing capi-appfw-application-0.1.0-49.1 [264/266] installing ui-gadget-1-0.1.16-1.1 [265/266] installing isf-2.3.6117-5.1 open log dev is failed open log dev is failed [266/266] installing isf-devel-2.3.6117-5.1 now finalizing build dir... /var/run/obs/worker/8/build/build: line 1761: /srv/build/root_8/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for ise-engine-default.spec: 4c4 < Release: 5 --- > Release: 5.1 35a36 > %changelog ----------------------------------------------------------------- ----- building ise-engine-default.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/f481643c1d23d1a48ea16f819a28c1a1-ise-engine-default' /home/abuild/rpmbuild/SOURCES/ise-engine-default.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.hYpltf + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf ise-engine-default-0.1.5023 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-default-0.1.5023.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd ise-engine-default-0.1.5023 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.1I2Y8i + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd ise-engine-default-0.1.5023 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info + aclocal -I ./m4 + autoheader + libtoolize -c --automake libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl' + automake --add-missing --copy --include-deps configure.ac:31: installing `./config.guess' configure.ac:31: installing `./config.sub' configure.ac:21: installing `./install-sh' Makefile.am: installing `./INSTALL' Makefile.am: installing `./COPYING' using GNU General Public License v3 file Makefile.am: Consider adding the COPYING file to the version control system Makefile.am: for your code, to avoid questions about which license your project uses. + autoconf + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes ./configure: line 3156: PLATFORM_INIT: command not found checking build system type... armv7l-unknown-linux-gnueabi checking host system type... armv7l-unknown-linux-gnueabi checking for style of include used by make... GNU checking for armv7l-unknown-linux-gnueabi-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r checking for armv7l-unknown-linux-gnueabi-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for armv7l-unknown-linux-gnueabi-ar... no checking for ar... ar checking for armv7l-unknown-linux-gnueabi-strip... no checking for strip... strip checking for armv7l-unknown-linux-gnueabi-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking which extension is used for runtime loadable modules... .so checking which variable specifies run-time module search path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib /emul/ia32-linux/usr/i586-tizen-linux/lib /emul/ia32-linux/usr/local/lib /emul/ia32-linux/lib /emul/ia32-linux/usr/lib checking for library containing dlopen... -ldl checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... yes checking for error_t... yes checking for argz_add... yes checking for argz_append... yes checking for argz_count... yes checking for argz_create_sep... yes checking for argz_insert... yes checking for argz_next... yes checking for argz_stringify... yes checking if argz actually works... yes checking whether libtool supports -dlopen/-dlpreopen... yes checking for ltdl.h... no checking where to find libltdl headers... -I${top_srcdir}/libltdl checking where to find libltdl library... ${top_build_prefix}libltdl/libltdlc.la checking for unistd.h... (cached) yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for mach-o/dyld.h... no checking for dirent.h... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes checking for strlcat... no checking for strlcpy... no checking for armv7l-unknown-linux-gnueabi-g++... no checking for armv7l-unknown-linux-gnueabi-c++... no checking for armv7l-unknown-linux-gnueabi-gpp... no checking for armv7l-unknown-linux-gnueabi-aCC... no checking for armv7l-unknown-linux-gnueabi-CC... no checking for armv7l-unknown-linux-gnueabi-cxx... no checking for armv7l-unknown-linux-gnueabi-cc++... no checking for armv7l-unknown-linux-gnueabi-cl.exe... no checking for armv7l-unknown-linux-gnueabi-FCC... no checking for armv7l-unknown-linux-gnueabi-KCC... no checking for armv7l-unknown-linux-gnueabi-RCC... no checking for armv7l-unknown-linux-gnueabi-xlC_r... no checking for armv7l-unknown-linux-gnueabi-xlC... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes checking whether the g++ linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... no checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for armv7l-unknown-linux-gnueabi-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking for an ANSI C-conforming const... yes checking for size_t... yes checking for armv7l-unknown-linux-gnueabi-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for ISF... yes checking for ISF_GTKUTILS... no checking for ANSI C header files... (cached) yes configure: creating ./config.status config.status: creating Makefile config.status: creating m4/Makefile config.status: creating src/Makefile config.status: creating data/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/libltdl) configure: WARNING: no configuration information is in libltdl + make -j4 make all-recursive make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' Making all in m4 make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4' Making all in src make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src' /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c -o ise_engine_default_la-isf_default_imengine.lo `test -f 'isf_default_imengine.cpp' || echo './'`isf_default_imengine.cpp libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c isf_default_imengine.cpp -fPIC -DPIC -o .libs/ise_engine_default_la-isf_default_imengine.o isf_default_imengine.cpp: In member function 'void DefaultFactory::reload_config(const scim::ConfigPointer&)': isf_default_imengine.cpp:165:91: warning: 'hw_detected' may be used uninitialized in this function mv -f .deps/ise_engine_default_la-isf_default_imengine.Tpo .deps/ise_engine_default_la-isf_default_imengine.Plo /bin/sh ../libtool --tag=CXX --mode=link g++ -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -o ise-engine-default.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine ise_engine_default_la-isf_default_imengine.lo -ldl libtool: link: /usr/bin/nm -B .libs/ise_engine_default_la-isf_default_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed 's/.* //' | sort | uniq > .libs/ise-engine-default.exp libtool: link: /bin/grep -E -e "^[^_].*" ".libs/ise-engine-default.exp" > ".libs/ise-engine-default.expT" libtool: link: mv -f ".libs/ise-engine-default.expT" ".libs/ise-engine-default.exp" libtool: link: g++ -shared -nostdlib //usr/lib/crti.o /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.5.3/crtbeginS.o .libs/ise_engine_default_la-isf_default_imengine.o -lscim-1.0 -ldl -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.5.3 -L//lib -L//usr/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.5.3/crtendS.o //usr/lib/crtn.o -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,ise-engine-default.so -Wl,-retain-symbols-file -Wl,.libs/ise-engine-default.exp -o .libs/ise-engine-default.so libtool: link: ( cd ".libs" && rm -f "ise-engine-default.la" && ln -s "../ise-engine-default.la" "ise-engine-default.la" ) make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src' Making all in data make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.n9DFuM + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd ise-engine-default-0.1.5023 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm install Making install in m4 make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4' Making install in src make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/scim-1.0/1.4.0/IMEngine" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine" /bin/sh ../libtool --mode=install /usr/bin/install -c ise-engine-default.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine' libtool: install: /usr/bin/install -c .libs/ise-engine-default.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.so libtool: install: /usr/bin/install -c .libs/ise-engine-default.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.la libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src' Making install in data make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/share/scim/icons" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/share/scim/icons" /usr/bin/install -c -m 644 isf-default.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/share/scim/icons' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data' make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023' + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm -regex '.*\.a$' + xargs rm -f -- + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/share/license + install -m0644 /home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/share/license/ise-engine-default + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.so 35 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm Processing files: ise-engine-default-0.1.5023-5.1.armv7l Provides: ise-engine-default.so Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libscim-1.0.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9) Processing files: ise-engine-default-debuginfo-0.1.5023-5.1.armv7l Processing files: ise-engine-default-debugsource-0.1.5023-5.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-default-0.1.5023-5.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-0.1.5023-5.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debuginfo-0.1.5023-5.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debugsource-0.1.5023-5.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.tggv3j + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd ise-engine-default-0.1.5023 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-5.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w21 finished "build ise-engine-default.spec" at Sat Feb 16 11:29:35 UTC 2013. Retried build at Sat Feb 16 21:53:49 2013 returned same result, skipped Retried build at Sun Feb 17 01:42:56 2013 returned same result, skipped Retried build at Sun Feb 17 07:45:28 2013 returned same result, skipped