Memory limit set to 110504152KB
Using BUILD_ROOT=/srv/build/root_8
Using BUILD_ARCH=armv7el


w09 started "build xcb-proto.spec" at Fri Feb 15 20:13:31 UTC 2013.

Building xcb-proto for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 '41038752d3d721c0b06b8dba0c0af9f4'

processing specfile /srv/build/root_8/.build-srcdir/xcb-proto.spec ...
running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/xcb-proto.spec
init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/xcb-proto.spec build rpmlint-Factory ...
copying qemu
 /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh

Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason
[1/55] preinstalling nss...
[2/55] preinstalling libfile-x86-arm...
[3/55] preinstalling elfutils-libelf-x86-arm...
[4/55] preinstalling nss-softokn-freebl-x86-arm...
[5/55] preinstalling nss-x86-arm...
[6/55] preinstalling nspr-x86-arm...
[7/55] preinstalling libgcc-x86-arm...
[8/55] preinstalling libacl-x86-arm...
[9/55] preinstalling libattr-x86-arm...
[10/55] preinstalling libcap-x86-arm...
[11/55] preinstalling liblua-x86-arm...
[12/55] preinstalling popt-x86-arm...
[13/55] preinstalling xz-libs-x86-arm...
[14/55] preinstalling zlib-x86-arm...
[15/55] preinstalling file...
[16/55] preinstalling sqlite-x86-arm...
[17/55] preinstalling mpfr-x86-arm...
[18/55] preinstalling gmp-x86-arm...
[19/55] preinstalling mpc-x86-arm...
[20/55] preinstalling bzip2-libs-x86-arm...
[21/55] preinstalling rpm-x86-arm...
[22/55] preinstalling rpm-libs-x86-arm...
[23/55] preinstalling tizen-accelerator...
[24/55] preinstalling eglibc-x86-arm...
[25/55] preinstalling ncurses-libs-x86-arm...
[26/55] preinstalling bash-x86-arm...
[27/55] preinstalling rpm...
[28/55] preinstalling rpm-libs...
[29/55] preinstalling setup...
[30/55] preinstalling filesystem...
[31/55] preinstalling bash...
[32/55] preinstalling bzip2...
[33/55] preinstalling coreutils...
[34/55] preinstalling diffutils...
[35/55] preinstalling liblua...
[36/55] preinstalling eglibc...
[37/55] preinstalling eglibc-common...
[38/55] preinstalling libacl...
[39/55] preinstalling libattr...
[40/55] preinstalling libgcc...
[41/55] preinstalling libcap...
[42/55] preinstalling popt...
[43/55] preinstalling readline...
[44/55] preinstalling sed...
[45/55] preinstalling tar...
[46/55] preinstalling zlib...
[47/55] preinstalling sqlite...
[48/55] preinstalling ncurses-libs...
[49/55] preinstalling elfutils-libelf...
[50/55] preinstalling bzip2-libs...
[51/55] preinstalling libstdc++...
[52/55] preinstalling libfile...
[53/55] preinstalling xz-libs...
[54/55] preinstalling nspr...
[55/55] preinstalling nss-softokn-freebl...
running rpm-x86-arm postinstall script
running rpm-libs-x86-arm postinstall script
running tizen-accelerator postinstall script
running bash-x86-arm postinstall script
initializing rpm db...
reordering...cycle: bash -> eglibc -> eglibc-common
  breaking dependency eglibc-common -> bash
cycle: eglibc -> eglibc-common
  breaking dependency eglibc-common -> eglibc
cycle: eglibc -> eglibc-common -> libgcc
  breaking dependency eglibc -> eglibc-common
cycle: eglibc -> libgcc
  breaking dependency libgcc -> eglibc
cycle: filesystem -> setup
  breaking dependency setup -> filesystem
cycle: ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses
cycle: ncurses-base -> ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses-base
cycle: perl -> perl-libs
  breaking dependency perl -> perl-libs
cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel
  breaking dependency perl -> perl-ExtUtils-MakeMaker
cycle: perl -> perl-IO-Compress-Zlib
  breaking dependency perl -> perl-IO-Compress-Zlib
cycle: perl -> perl-IO-Compress-Base
  breaking dependency perl -> perl-IO-Compress-Base
cycle: perl -> perl-Module-Pluggable
  breaking dependency perl -> perl-Module-Pluggable
cycle: perl -> perl-Pod-Simple
  breaking dependency perl -> perl-Pod-Simple
cycle: perl-devel -> perl-ExtUtils-MakeMaker
  breaking dependency perl-devel -> perl-ExtUtils-MakeMaker
cycle: perl-ExtUtils-ParseXS -> perl-devel
  breaking dependency perl-devel -> perl-ExtUtils-ParseXS
cycle: nss -> nss-sysinit
  breaking dependency nss -> nss-sysinit
cycle: perl-CPAN -> perl-Test-Harness
  breaking dependency perl-Test-Harness -> perl-CPAN
cycle: rpm-libs -> rpm
  breaking dependency rpm -> rpm-libs
done
[1/146] [2/146] installing kernel-headers-2.6.36-1.1
[3/146] installing tizen-release-2.0.0-1.1
[4/146] installing tzdata-2011h-1.1
[5/146] installing libgcc-4.5.3-1.3
[6/146] installing setup-0.1-1.1
[7/146] installing filesystem-0.1-1.1
warning: group lock does not exist - using root
warning: group mail does not exist - using root
[8/146] installing eglibc-2.13-1.8
[9/146] installing eglibc-common-2.13-1.8
warning: %post(eglibc-common-2.13-1.8.armv7l) scriptlet failed, exit status 255
[10/146] installing bash-4.1-3.1
[11/146] installing bzip2-libs-1.0.5-4.2
[12/146] installing cpio-2.8-3.1
[13/146] installing diffutils-3.0-3.1
[14/146] installing e2fsprogs-libs-1.41.9-2.2
[15/146] installing elfutils-libelf-0.152-1.8
[16/146] installing fdupes-1.40-42.1
[17/146] installing findutils-4.2.31-1.1
[18/146] installing gdbm-1.8.3-2.1
[19/146] installing libattr-2.4.44-7.4
[20/146] installing libgomp-4.5.3-1.3
[21/146] installing libidn-1.15-1.2
[22/146] installing liblua-5.1.4-6.2
[23/146] installing libstdc++-4.5.3-1.3
[24/146] installing libuuid-2.20.2-1.1
[25/146] installing lzo-2.03-1.2
[26/146] installing m4-1.4.14-1.1
[27/146] installing net-tools-1.60-88.1
[28/146] installing nspr-4.9-1.5
[29/146] installing nss-softokn-freebl-3.12.9-5.9
[30/146] installing patch-2.6-1.1
[31/146] installing pkgconfig-0.25-2.2
[32/146] installing popt-1.16-3.2
[33/146] installing readline-5.2-13.2
[34/146] installing sed-4.1.5-2.1
[35/146] installing sqlite-3.7.9-3.2
[36/146] installing xz-libs-5.0.3-1.2
[37/146] installing zlib-1.2.5-2.8
[38/146] installing ncurses-libs-5.7-4.2
[39/146] installing build-compare-2009.10.14-26.2
[40/146] installing libstdc++-devel-4.5.3-1.3
[41/146] installing eglibc-headers-2.13-1.8
[42/146] installing libcap-2.21-1.2
[43/146] installing unzip-6.0-9.3
[44/146] installing zlib-devel-1.2.5-2.8
[45/146] installing c-ares-1.7.4-1.2
[46/146] installing gmp-5.0.1-1.2
[47/146] installing libacl-2.2.49-1.2
[48/146] installing libfile-5.04-1.2
[49/146] installing libpcre-7.9-1.3
[50/146] installing libpython-2.7.1-4.5
[51/146] installing lzo-minilzo-2.03-1.2
[52/146] installing make-3.82-152.2
[53/146] installing ncurses-5.7-4.2
[54/146] installing openssl-1.0.1c-1.9
[55/146] installing binutils-2.22-1.2
[56/146] installing bzip2-1.0.5-4.2
[57/146] installing libblkid-2.20.2-1.1
[58/146] installing xz-5.0.3-1.2
[59/146] installing elfutils-libs-0.152-1.8
[60/146] installing nss-3.12.9-5.9
[61/146] installing perl-5.12.1-61.3
[62/146] installing ncurses-base-5.7-4.2
[63/146] installing perl-HTML-Tagset-3.20-8.1
[64/146] installing perl-IO-Compress-Base-2.008-61.3
[65/146] installing perl-Module-Pluggable-3.60-61.3
[66/146] installing perl-Pod-Escapes-1.04-61.3
[67/146] installing perl-TimeDate-1.20-1.1
[68/146] installing eglibc-devel-2.13-1.8
[69/146] installing grep-2.5.1a-63.1
[70/146] installing lzo-devel-2.03-1.2
[71/146] installing mpfr-3.0.0-1.2
[72/146] installing perl-Compress-Raw-Zlib-2.008-61.3
[73/146] installing perl-devel-5.12.1-61.3
[74/146] installing perl-libs-5.12.1-61.3
[75/146] installing tar-1.17-3.2
[76/146] installing coreutils-6.9-9.4
[77/146] installing file-5.04-1.2
[78/146] installing libmount-2.20.2-1.1
[79/146] installing xz-lzma-compat-5.0.3-1.2
[80/146] installing elfutils-0.152-1.8
[81/146] installing nss-sysinit-3.12.9-5.9
[82/146] installing python-base-2.7.1-4.5
[83/146] installing libcurl-7.21.3-1.2
[84/146] installing perl-ExtUtils-ParseXS-2.18-61.3
[85/146] installing perl-Pod-Simple-3.07-61.3
[86/146] installing perl-Test-Simple-0.80-61.3
[87/146] installing tizen-accelerator-1.0.1-1.1
[88/146] installing perl-IO-Compress-Zlib-2.008-61.3
[89/146] installing perl-Test-Harness-3.12-61.3
[90/146] installing gawk-3.1.5-2.1
[91/146] installing gzip-1.3.14-2.1
[92/146] installing mpc-0.9-1.1
[93/146] installing build-2011.01.10a-1.1
[94/146] installing python-devel-2.7.1-4.5
[95/146] installing curl-7.21.3-1.2
[96/146] installing util-linux-2.20.2-1.1
warning: group tty does not exist - using root
/bin/chown: `root:root': invalid user
[97/146] installing bzip2-libs-x86-arm-1.0.5-8.1
[98/146] installing eglibc-x86-arm-2.13-8.2
[99/146] installing elfutils-libelf-x86-arm-0.152-8.1
[100/146] installing elfutils-libs-x86-arm-0.152-8.2
[101/146] installing gmp-x86-arm-5.0.1-8.1
[102/146] installing libacl-x86-arm-2.2.49-8.1
[103/146] installing libattr-x86-arm-2.4.44-8.1
[104/146] installing libcap-x86-arm-2.21-8.1
[105/146] installing libfile-x86-arm-5.04-8.1
[106/146] installing libgcc-x86-arm-4.5.3-8.1
[107/146] installing liblua-x86-arm-5.1.4-8.1
[108/146] installing mpc-x86-arm-0.9-8.1
[109/146] installing mpfr-x86-arm-3.0.0-9.1
[110/146] installing ncurses-libs-x86-arm-5.7-8.1
[111/146] installing nspr-x86-arm-4.9-8.2
[112/146] installing nss-softokn-freebl-x86-arm-3.12.9-8.1
[113/146] installing nss-x86-arm-3.12.9-8.1
[114/146] installing perl-ExtUtils-MakeMaker-6.36-61.3
[115/146] installing popt-x86-arm-1.16-8.1
[116/146] installing sqlite-x86-arm-3.7.9-8.1
[117/146] installing xz-libs-x86-arm-5.0.3-8.1
[118/146] installing zlib-x86-arm-1.2.5-8.1
[119/146] installing cpp-4.5.3-1.3
[120/146] installing rpm-4.9.1-4.2
[121/146] installing perl-CPAN-1.9205-61.3
[122/146] installing bash-x86-arm-4.1-8.1
[123/146] installing fdupes-x86-arm-1.40-8.1
[124/146] installing findutils-x86-arm-4.2.31-8.1
[125/146] installing gawk-x86-arm-3.1.5-8.2
[126/146] installing gzip-x86-arm-1.3.14-8.1
[127/146] installing make-x86-arm-3.82-8.1
[128/146] installing sed-x86-arm-4.1.5-8.1
[129/146] installing diffutils-x86-arm-3.0-8.1
[130/146] installing patch-x86-arm-2.6-8.1
[131/146] installing autoconf-2.68-1.1
[132/146] installing coreutils-x86-arm-6.9-8.1
[133/146] installing file-x86-arm-5.04-8.1
[134/146] installing tar-x86-arm-1.17-8.1
[135/146] installing elfutils-x86-arm-0.152-8.2
[136/146] installing gcc-4.5.3-1.3
[137/146] installing rpm-libs-4.9.1-4.2
[138/146] installing rpm-libs-x86-arm-4.9.1-8.1
[139/146] installing automake-1.11.1-3.1
[140/146] installing gcc-c++-4.5.3-1.3
[141/146] installing rpm-build-4.9.1-4.2
[142/146] installing libtool-2.2.6b-1.2
[143/146] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.1
"GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 "
GCC and GCC-accel versions match. Enabling cross-compiler.
cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory
cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory
[144/146] installing rpm-x86-arm-4.9.1-8.1
/bin/rpm.orig-arm already present - skipping.
/usr/bin/rpm2cpio.orig-arm already present - skipping.
/usr/bin/rpmdb.orig-arm already present - skipping.
/usr/bin/rpmquery.orig-arm already present - skipping.
/usr/bin/rpmsign.orig-arm already present - skipping.
/usr/bin/rpmverify.orig-arm already present - skipping.
[145/146] installing rpm-build-x86-arm-4.9.1-8.1
[146/146] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1
mv: cannot stat `/usr/bin/gprov': No such file or directory
now finalizing build dir...
/var/run/obs/worker/8/build/build: line 1761: /srv/build/root_8/etc/passwd: No such file or directory
build target is armv7l-tizen-linux
-----------------------------------------------------------------
I have the following modifications for xcb-proto.spec:
4c4
< Release: 1
---
> Release: 1.1
-----------------------------------------------------------------
----- building xcb-proto.spec (user abuild)
-----------------------------------------------------------------
-----------------------------------------------------------------
+ exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/41038752d3d721c0b06b8dba0c0af9f4-xcb-proto' /home/abuild/rpmbuild/SOURCES/xcb-proto.spec
Building target platforms: armv7l-tizen-linux
Building for target armv7l-tizen-linux
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.2saXP8
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/abuild/rpmbuild/BUILD
+ rm -rf xcb-proto-1.7.1
+ /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-proto-1.7.1.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd xcb-proto-1.7.1
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.CFyUkw
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xcb-proto-1.7.1
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
+ export FFLAGS
+ LD_AS_NEEDED=1
+ export LD_AS_NEEDED
+ ./autogen.sh
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf
autoreconf: configure.ac: not using Autoheader
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:9: installing `./install-sh'
configure.ac:9: installing `./missing'
autoreconf: Leaving directory `.'
configure: WARNING: unrecognized options: --enable-maintainer-mode
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for xmllint... no
configure: WARNING: xmllint not found; unable to validate against schema.
checking for a Python interpreter with version >= 2.5... python
checking for python... /usr/bin/python
checking for python version... 2.7
checking for python platform... linux3
checking for python script directory... ${prefix}/lib/python2.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating xcbgen/Makefile
config.status: creating xcb-proto.pc
configure: WARNING: unrecognized options: --enable-maintainer-mode
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir'
+ export FFLAGS
+ autoreconf -v --install --force
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
autoreconf: configure.ac: not using Autoheader
autoreconf: running: automake --add-missing --copy --force-missing
autoreconf: Leaving directory `.'
+ ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-shared
configure: WARNING: unrecognized options: --disable-shared
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for xmllint... no
configure: WARNING: xmllint not found; unable to validate against schema.
checking for a Python interpreter with version >= 2.5... python
checking for python... /usr/bin/python
checking for python version... 2.7
checking for python platform... linux3
checking for python script directory... ${prefix}/lib/python2.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating xcbgen/Makefile
config.status: creating xcb-proto.pc
configure: WARNING: unrecognized options: --disable-shared
+ make -j4
Making all in src
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
Making all in xcbgen
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Sjwv8h
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xcb-proto-1.7.1
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
+ /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm install
Making install in src
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/xcb"
 /usr/bin/install -c -m 644 xcb.xsd xproto.xml bigreq.xml composite.xml damage.xml dpms.xml dri2.xml ge.xml glx.xml randr.xml record.xml render.xml res.xml screensaver.xml shape.xml shm.xml sync.xml xc_misc.xml xevie.xml xf86dri.xml xf86vidmode.xml xfixes.xml xinerama.xml xinput.xml xkb.xml xprint.xml xselinux.xml xtest.xml xv.xml xvmc.xml '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/xcb'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
Making install in xcbgen
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/python2.7/site-packages/xcbgen" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/lib/python2.7/site-packages/xcbgen"
 /usr/bin/install -c -m 644 __init__.py error.py expr.py matcher.py state.py xtypes.py '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/lib/python2.7/site-packages/xcbgen'
Byte-compiling python modules...
__init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py
Byte-compiling python modules (optimized versions) ...
__init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/lib/pkgconfig"
 /usr/bin/install -c -m 644 xcb-proto.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/lib/pkgconfig'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
+ rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/info/dir
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm -regex '.*\.la$'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm -regex '.*\.a$'
+ xargs rm -f --
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/info
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/doc
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/doc/xcb-proto
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/gtk-doc
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/share/man
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm -regex '.*/man/man./.*.[0-9]'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm -regex '.*/man/../man./.*.[0-9]'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm -regex '.*/man/man./.*.[0-9]pm'
+ xargs rm -f --
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm//brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-python-bytecompile
Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm/usr/lib/python2.7/ using /usr/bin/python2.7
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
Processing files: xcb-proto-1.7.1-1.1.armv7l
Provides: pkgconfig(xcb-proto) = 1.7.1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: /usr/bin/pkg-config python(abi) = 2.7
Processing files: xcb-proto-debuginfo-1.7.1-1.1.armv7l
Processing files: xcb-proto-debugsource-1.7.1-1.1.armv7l
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
Wrote: /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.1.src.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-1.1.armv7l.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.8Yf695
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xcb-proto-1.7.1
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.1.arm
+ exit 0
... checking for files with abuild user/group
... creating baselibs

w09 finished "build xcb-proto.spec" at Fri Feb 15 20:14:39 UTC 2013.


Retried build at Fri Feb 15 12:30:18 2013 returned same result, skipped
Retried build at Sat Feb 16 19:43:23 2013 returned same result, skipped
Retried build at Sat Feb 16 19:51:53 2013 returned same result, skipped
Retried build at Sat Feb 16 23:30:56 2013 returned same result, skipped
Retried build at Sun Feb 17 06:43:31 2013 returned same result, skipped