Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_4 Using BUILD_ARCH=armv7el w16 started "build capi-location-route.spec" at Sun Feb 17 14:25:42 UTC 2013. Building capi-location-route for project 'Tizen:2.0:Main' repository 'standard' arch 'armv7el' srcmd5 'c31666651fc383ec7fa708618648dfd9' processing specfile /srv/build/root_4/.build-srcdir/capi-location-route.spec ... running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/capi-location-route.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/capi-location-route.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/55] preinstalling nss... [2/55] preinstalling libfile-x86-arm... [3/55] preinstalling elfutils-libelf-x86-arm... [4/55] preinstalling nss-softokn-freebl-x86-arm... [5/55] preinstalling nss-x86-arm... [6/55] preinstalling nspr-x86-arm... [7/55] preinstalling libgcc-x86-arm... [8/55] preinstalling libacl-x86-arm... [9/55] preinstalling libattr-x86-arm... [10/55] preinstalling libcap-x86-arm... [11/55] preinstalling liblua-x86-arm... [12/55] preinstalling popt-x86-arm... [13/55] preinstalling xz-libs-x86-arm... [14/55] preinstalling zlib-x86-arm... [15/55] preinstalling file... [16/55] preinstalling sqlite-x86-arm... [17/55] preinstalling mpfr-x86-arm... [18/55] preinstalling gmp-x86-arm... [19/55] preinstalling mpc-x86-arm... [20/55] preinstalling bzip2-libs-x86-arm... [21/55] preinstalling rpm-x86-arm... [22/55] preinstalling rpm-libs-x86-arm... [23/55] preinstalling tizen-accelerator... [24/55] preinstalling eglibc-x86-arm... [25/55] preinstalling ncurses-libs-x86-arm... [26/55] preinstalling bash-x86-arm... [27/55] preinstalling rpm... [28/55] preinstalling rpm-libs... [29/55] preinstalling setup... [30/55] preinstalling filesystem... [31/55] preinstalling bash... [32/55] preinstalling bzip2... [33/55] preinstalling coreutils... [34/55] preinstalling diffutils... [35/55] preinstalling liblua... [36/55] preinstalling eglibc... [37/55] preinstalling eglibc-common... [38/55] preinstalling libacl... [39/55] preinstalling libattr... [40/55] preinstalling libgcc... [41/55] preinstalling libcap... [42/55] preinstalling popt... [43/55] preinstalling readline... [44/55] preinstalling sed... [45/55] preinstalling tar... [46/55] preinstalling zlib... [47/55] preinstalling sqlite... [48/55] preinstalling ncurses-libs... [49/55] preinstalling elfutils-libelf... [50/55] preinstalling bzip2-libs... [51/55] preinstalling libstdc++... [52/55] preinstalling libfile... [53/55] preinstalling xz-libs... [54/55] preinstalling nspr... [55/55] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: systemd -> libudev -> udev breaking dependency systemd -> libudev cycle: pkgmgr-info -> pkgmgr-info-parser breaking dependency pkgmgr-info-parser -> pkgmgr-info cycle: pkgmgr-client -> pkgmgr-installer -> pkgmgr breaking dependency pkgmgr -> pkgmgr-client cycle: pkgmgr-installer -> pkgmgr breaking dependency pkgmgr -> pkgmgr-installer cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/266] [2/266] installing capi-base-common-0.1.0-8.1 [3/266] installing kernel-headers-2.6.36-1.1 [4/266] installing libX11-common-1.5.0-2.3 [5/266] installing opengl-es-virtual-drv-0.1.3-10.1 [6/266] installing tizen-release-2.0.0-2.1 [7/266] installing tzdata-2011h-2.1 [8/266] installing libgcc-4.5.3-2.1 [9/266] installing setup-0.1-2.1 [10/266] installing filesystem-0.1-2.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [11/266] installing eglibc-2.13-2.12 [12/266] installing eglibc-common-2.13-2.12 warning: %post(eglibc-common-2.13-2.12.armv7l) scriptlet failed, exit status 255 [13/266] installing iniparser-2.17-3.1 [14/266] installing bash-4.1-4.1 [15/266] installing bzip2-libs-1.0.5-5.1 [16/266] installing cpio-2.8-4.1 [17/266] installing diffutils-3.0-3.1 [18/266] installing e2fsprogs-libs-1.41.11-2.3 [19/266] installing eina-1.7.1+svn.77445+build01r01-1.5 [20/266] installing elfutils-libelf-0.152-2.10 [21/266] installing expat-2.0.1-9.1 [22/266] installing fdupes-1.40-43.1 [23/266] installing findutils-4.2.31-2.1 [24/266] installing fribidi-0.19.5-5.1 [25/266] installing kmod-5-2.2 [26/266] installing libICE-1.0.8-1.1 [27/266] installing libXau-1.0.7-1.1 [28/266] installing libasound-1.0.24.1-1.1 [29/266] installing libattr-2.4.44-8.2 [30/266] installing libdrm2-2.4.35-11.1 [31/266] installing libexif-0.6.21-4.1 [32/266] installing libffi-3.0.9-100.1 [33/266] installing libgdbm-1.8.3-3.2 [34/266] installing libgomp-4.5.3-2.1 [35/266] installing libgpg-error-1.7-1.1 [36/266] installing libidn-1.15-6.1 [37/266] installing libiri-1.1-1.1 [38/266] installing libjpeg-turbo-1.2.0-7.2 [39/266] installing liblua-5.1.4-7.1 [40/266] installing libogg-1.2.1-3.1 [41/266] installing libstdc++-4.5.3-2.1 [42/266] installing libuuid-2.20.2-5.1 [43/266] installing lzo-2.03-2.1 [44/266] installing m4-1.4.14-2.1 [45/266] installing make-3.81-1.1 [46/266] installing net-tools-1.60-89.4 [47/266] installing nspr-4.8.7-1.7 [48/266] installing nss-softokn-freebl-3.12.9-4.10 [49/266] installing patch-2.6.1.169-1.1 [50/266] installing pixman-0.26.0-8.1 [51/266] installing pkgconfig-0.25-3.1 [52/266] installing popt-1.16-4.1 [53/266] installing readline-5.2-13.1 [54/266] installing sed-4.1.5-2.1 [55/266] installing smack-1.0slp2+s7-2.1 [56/266] installing sqlite-3.7.13-1.1 [57/266] installing xz-libs-5.0.3-2.1 [58/266] installing zlib-1.2.5-3.9 [59/266] installing ncurses-libs-5.7-6.1 [60/266] installing build-compare-2009.10.14-27.5 [61/266] installing libstdc++-devel-4.5.3-2.1 [62/266] installing vconf-internal-keys-devel-0.0.66-1.1 [63/266] installing capi-base-common-devel-0.1.0-8.1 [64/266] installing eglibc-headers-2.13-2.12 [65/266] installing libcap-2.21-2.1 [66/266] installing unzip-6.0-10.5 [67/266] installing zlib-devel-1.2.5-3.9 [68/266] installing c-ares-1.7.4-1.2 [69/266] installing embryo-1.7.1+svn.76491+build01r01-1.1 [70/266] installing freetype-2.4.9-2.1 [71/266] installing gmp-5.0.1-2.1 [72/266] installing libacl-2.2.49-2.1 [73/266] installing libdlog-0.4.1-3.1 [74/266] installing libdrm-slp1-2.4.35-11.1 [75/266] installing libfile-5.04-2.1 [76/266] installing libgcrypt-1.4.4-5.1 [77/266] installing libpcre-7.9-2.1 [78/266] installing libpng-1.2.50-1.1 [79/266] installing libtheora-1.1.1-4.1 [80/266] installing libvorbis-1.2.3-3.1 [81/266] installing libxcb-1.8.1-1.1 [82/266] installing libxml2-2.7.8-10.1 [83/266] installing lzo-minilzo-2.03-2.1 [84/266] installing ncurses-5.7-6.1 [85/266] installing openssl-1.0.1c-2.17 [86/266] installing binutils-2.21.51.20110421-5.1 [87/266] installing bzip2-1.0.5-5.1 [88/266] installing glib2-2.32.3-5.4 [89/266] installing libSM-1.2.1-1.1 [90/266] installing libblkid-2.20.2-5.1 [91/266] installing libicu-4.8-1.4 [92/266] installing libprivilege-control-0.0.19-1.1 ln: creating symbolic link `/lib/udev/rules.d/95-permissions-slp.rules': No such file or directory warning: %post(libprivilege-control-0.0.19-1.1.armv7l) scriptlet failed, exit status 1 [93/266] installing xz-5.0.3-2.1 [94/266] installing eet-1.7.1+svn.77495+build01r01-1.1 [95/266] installing elfutils-libs-0.152-2.10 [96/266] installing nss-3.12.9-4.10 [97/266] installing perl-5.12.1-64.2 [98/266] installing ncurses-base-5.7-6.1 [99/266] installing perl-HTML-Tagset-3.20-8.1 [100/266] installing perl-IO-Compress-Base-2.008-64.2 [101/266] installing perl-Module-Pluggable-3.60-64.2 [102/266] installing perl-Pod-Escapes-1.04-64.2 [103/266] installing perl-TimeDate-1.20-1.1 [104/266] installing eglibc-devel-2.13-2.12 [105/266] installing libdlog-devel-0.4.1-3.1 [106/266] installing grep-2.5.1a-63.1 [107/266] installing lzo-devel-2.03-2.1 [108/266] installing mpfr-3.0.0-2.1 [109/266] installing perl-Compress-Raw-Zlib-2.008-64.2 [110/266] installing perl-devel-5.12.1-64.2 [111/266] installing perl-libs-5.12.1-64.2 [112/266] installing tar-1.17-3.2 [113/266] installing bundle-0.1.27-1.2 [114/266] installing coreutils-6.9-10.1 [115/266] installing ecore-1.7.1+svn.77580+build01r01-2.2 [116/266] installing file-5.04-2.1 [117/266] installing gstreamer-0.10.36-5.2 [118/266] installing libX11-1.5.0-2.3 [119/266] installing libmount-2.20.2-5.1 [120/266] installing libsf-common-0.3.18-1.1 [121/266] installing xz-lzma-compat-5.0.3-2.1 [122/266] installing app-checker-0.0.16-1.2 [123/266] installing elfutils-0.152-2.10 [124/266] installing nss-sysinit-3.12.9-4.10 [125/266] installing shared-mime-info-0.60-4.2 [126/266] installing libcurl-7.21.3-7.1 [127/266] installing libsoup2.4-2.38.1_0.1.1-1.1 [128/266] installing libslp-db-util-0.1.1-4.2 [129/266] installing libarchive-2.8.3-2.1 [130/266] installing perl-ExtUtils-ParseXS-2.18-64.2 [131/266] installing perl-Pod-Simple-3.07-64.2 [132/266] installing perl-Test-Simple-0.80-64.2 [133/266] installing tizen-accelerator-1.0.1-1.1 [134/266] installing libXcomposite-0.4.3-3.1 [135/266] installing libXext-1.3.1-1.1 [136/266] installing libXfixes-5.0-2.1 [137/266] installing libXrender-0.9.7-1.1 [138/266] installing perl-IO-Compress-Zlib-2.008-64.2 [139/266] installing perl-Test-Harness-3.12-64.2 [140/266] installing gawk-3.1.5-3.1 [141/266] installing gzip-1.3.14-2.1 [142/266] installing mpc-0.9-2.1 [143/266] installing pam-1.1.5-3.1 [144/266] installing xdgmime-0.0.12-2.1 chown: `root:root': invalid user [145/266] installing app-checker-server-0.0.16-1.2 [146/266] installing build-2011.01.10a-2.1 [147/266] installing ecore-imf-1.7.1+svn.77580+build01r01-2.2 [148/266] installing ecore-input-1.7.1+svn.77580+build01r01-2.2 [149/266] installing giflib-4.1.6-13.3 [150/266] installing curl-7.21.3-7.1 [151/266] installing dbus-1.6.4-4.1 warning: group dbus does not exist - using root [152/266] installing ecore-con-1.7.1+svn.77580+build01r01-2.2 [153/266] installing util-linux-2.20.2-5.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [154/266] installing app2sd-0.5-8.2 [155/266] installing fontconfig-2.9.0-2.1 [156/266] installing librua-0.1.0-34.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.rua.db': No such file or directory chown: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db': No such file or directory chmod: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory /var/tmp/rpm-tmp.32vrQM: line 9: chsmack: command not found /var/tmp/rpm-tmp.32vrQM: line 10: chsmack: command not found warning: %post(librua-0.1.0-34.1.armv7l) scriptlet failed, exit status 127 [157/266] installing cmake-2.8.5-4.1 [158/266] installing glib2-devel-2.32.3-5.4 [159/266] installing bzip2-libs-x86-arm-1.0.5-8.2 [160/266] installing dbus-libs-1.6.4-4.1 [161/266] installing eglibc-x86-arm-2.13-8.6 [162/266] installing elfutils-libelf-x86-arm-0.152-8.2 [163/266] installing elfutils-libs-x86-arm-0.152-8.9 [164/266] installing gmp-x86-arm-5.0.1-8.2 [165/266] installing libacl-x86-arm-2.2.49-8.2 [166/266] installing libattr-x86-arm-2.4.44-8.2 [167/266] installing libcap-x86-arm-2.21-8.2 [168/266] installing libfile-x86-arm-5.04-8.2 [169/266] installing libgcc-x86-arm-4.5.3-8.2 [170/266] installing liblua-x86-arm-5.1.4-8.2 [171/266] installing mpc-x86-arm-0.9-8.2 [172/266] installing mpfr-x86-arm-3.0.0-9.2 [173/266] installing ncurses-libs-x86-arm-5.7-8.3 [174/266] installing nspr-x86-arm-4.8.7-8.9 [175/266] installing nss-softokn-freebl-x86-arm-3.12.9-8.8 [176/266] installing nss-x86-arm-3.12.9-8.8 [177/266] installing perl-ExtUtils-MakeMaker-6.36-64.2 [178/266] installing popt-x86-arm-1.16-8.2 [179/266] installing sqlite-x86-arm-3.7.9-8.2 [180/266] installing xz-libs-x86-arm-5.0.3-8.2 [181/266] installing zlib-x86-arm-1.2.5-8.2 [182/266] installing libXdamage-1.1.3-3.1 [183/266] installing libXgesture-0.1.0-3.1 [184/266] installing libXi-1.6.1-1.1 [185/266] installing libXinerama-1.1.2-1.1 [186/266] installing libXv-1.0.7-1.1 [187/266] installing libdri2-0.1.0-11.1 [188/266] installing libXcursor-1.1.13-1.1 [189/266] installing libXrandr-1.4.0-3.1 [190/266] installing ecore-fb-1.7.1+svn.77580+build01r01-2.2 [191/266] installing cpp-4.5.3-2.1 [192/266] installing ecore-file-1.7.1+svn.77580+build01r01-2.2 [193/266] installing ecore-ipc-1.7.1+svn.77580+build01r01-2.2 [194/266] installing cairo-1.12.8-2.3 [195/266] installing rpm-4.9.1-5.2 [196/266] installing perl-CPAN-1.9205-64.2 [197/266] installing bash-x86-arm-4.1-8.2 [198/266] installing dbus-glib-0.100-4.2 [199/266] installing fdupes-x86-arm-1.40-8.2 [200/266] installing findutils-x86-arm-4.2.31-8.2 [201/266] installing gawk-x86-arm-3.1.5-8.3 [202/266] installing gzip-x86-arm-1.3.14-8.2 [203/266] installing make-x86-arm-3.81-8.2 [204/266] installing patch-x86-arm-2.6.1.169-8.2 [205/266] installing sed-x86-arm-4.1.5-8.2 [206/266] installing diffutils-x86-arm-3.0-8.2 [207/266] installing libXtst-1.2.0-3.1 [208/266] installing autoconf-2.68-2.1 [209/266] installing coreutils-x86-arm-6.9-8.2 [210/266] installing efreet-1.7.1+svn.77412+build01r01-2.1 [211/266] installing file-x86-arm-5.04-8.2 [212/266] installing tar-x86-arm-1.17-8.2 [213/266] installing harfbuzz-0.9.7-1.2 [214/266] installing pango-1.26.1-5.2 (pango-querymodules:5950): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0) [215/266] installing elfutils-x86-arm-0.152-8.9 [216/266] installing systemd-43-1.2 [217/266] installing libslp-utilx-0.1.16-1.1 [218/266] installing gcc-4.5.3-2.1 [219/266] installing rpm-libs-4.9.1-5.2 [220/266] installing rpm-libs-x86-arm-4.9.1-8.2 [221/266] installing automake-1.11.1-4.1 [222/266] installing vconf-0.2.32-1.2 Running in chroot, ignoring request. [223/266] installing udev-182-6.4 Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [224/266] installing gcc-c++-4.5.3-2.1 [225/266] installing evas-1.7.1+svn.77561+build01r01-1.2 [226/266] installing ecore-x-1.7.1+svn.77580+build01r01-2.2 [227/266] installing gst-plugins-base-0.10.36-21.2 [228/266] installing rpm-build-4.9.1-5.2 [229/266] installing vconf-keys-devel-0.2.32-1.2 [230/266] installing libudev-182-6.4 [231/266] installing libtool-2.2.6b-2.1 [232/266] installing sensor-0.5.26-1.2 [233/266] installing sysman-0.2.29-1.1 [234/266] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-2.2 [235/266] installing ecore-input-evas-1.7.1+svn.77580+build01r01-2.2 [236/266] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [237/266] installing ail-0.2.55-1.2 [AIL_INITDB][D][main,214] AIL_INITDB : 0 open log dev is failed [AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory [AIL_INITDB][E][main,224] cannot load opt desktop directory. /var/tmp/rpm-tmp.C8rXFj: line 23: chsmack: command not found warning: %post(ail-0.2.55-1.2.armv7l) scriptlet failed, exit status 127 [238/266] installing pkgmgr-info-parser-0.0.54-1.2 [239/266] installing rpm-x86-arm-4.9.1-8.2 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [240/266] installing rpm-build-x86-arm-4.9.1-8.2 [241/266] installing vconf-devel-0.2.32-1.2 [242/266] installing cross-armv7l-binutils-accel-armv7l-2.22-1.2 mv: cannot stat `/usr/bin/gprov': No such file or directory [243/266] installing pkgmgr-info-0.0.54-1.2 [244/266] installing ecore-evas-1.7.1+svn.77580+build01r01-2.2 [245/266] installing edbus-1.7.1+svn.76526+build01r01-1.1 [246/266] installing edje-1.7.1+svn.77330+build01r03-1.1 [247/266] installing aul-0.0.240-1.5 warning: group app does not exist - using root warning: group app does not exist - using root Running in chroot, ignoring request. Running in chroot, ignoring request. Running in chroot, ignoring request. [248/266] installing ethumb-1.7.1+svn.75994+build01r01-1.1 [249/266] installing emotion-1.7.1+svn.76438+build01r01-1.2 [250/266] installing app-core-common-1.2-41.1 [251/266] installing app-svc-0.1.42-1.1 sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.appsvc.db': No such file or directory chown: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory chmod: cannot access `/opt/dbspace/.appsvc.db': No such file or directory chmod: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory /var/tmp/rpm-tmp.btIZD4: line 11: chsmack: command not found /var/tmp/rpm-tmp.btIZD4: line 12: chsmack: command not found warning: %post(app-svc-0.1.42-1.1.armv7l) scriptlet failed, exit status 127 [252/266] installing elementary-1.7.1+svn.77535+build01r05-1.1 [253/266] installing app-core-efl-1.2-41.1 [254/266] installing wrt-commons-0.2.93-1.1 This is new install of wrt-commons Calling /usr/bin/wrt_commons_reset_db.sh /opt/dbspace/.wrt.db doesn't exist sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.wrt.db': No such file or directory chmod: cannot access `/opt/dbspace/.wrt.db': No such file or directory /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.wrt_autosave.db': No such file or directory chmod: cannot access `/opt/dbspace/.wrt_autosave.db': No such file or directory /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.wrt_custom_handler.db': No such file or directory chmod: cannot access `/opt/dbspace/.wrt_custom_handler.db': No such file or directory /usr/bin/wrt_commons_create_clean_db.sh: line 30: pkill: command not found Creating machine-id /var/tmp/rpm-tmp.9WgDGA: line 56: chsmack: command not found /var/tmp/rpm-tmp.9WgDGA: line 57: chsmack: command not found /var/tmp/rpm-tmp.9WgDGA: line 58: chsmack: command not found /var/tmp/rpm-tmp.9WgDGA: line 59: chsmack: command not found /var/tmp/rpm-tmp.9WgDGA: line 60: chsmack: command not found /var/tmp/rpm-tmp.9WgDGA: line 61: chsmack: command not found [WRT] wrt-commons postinst done ... [255/266] installing pkgmgr-0.2.28-2.1 getpwuid_r(): failed due to unknown user id (0) [256/266] installing pkgmgr-installer-0.2.28-2.1 [257/266] installing security-server-0.0.61-1.1 This is new install of wrt-security Calling /usr/bin/wrt_security_create_clean_db.sh sqlite3: Error: cannot locate your home directory sqlite3: Error: cannot locate your home directory chown: cannot access `/opt/dbspace/.ace.db': No such file or directory chmod: cannot access `/opt/dbspace/.ace.db': No such file or directory [WRT] wrt-security postinst done ... [258/266] installing libsecurity-server-client-0.0.61-1.1 [259/266] installing pkgmgr-client-0.2.28-2.1 [260/266] installing capi-appfw-app-manager-0.1.0-20.4 [261/266] installing liblocation-appman-0.1.6-1.4 [262/266] installing liblocation-appman-devel-0.1.6-1.4 [263/266] installing libslp-location-0.4.4-1.1 open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed open log dev is failed [264/266] installing libslp-location-devel-0.4.4-1.1 [265/266] installing capi-location-manager-0.1.7-1.3 [266/266] installing capi-location-manager-devel-0.1.7-1.3 now finalizing build dir... /var/run/obs/worker/4/build/build: line 1761: /srv/build/root_4/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for capi-location-route.spec: 4c4 < Release: 1 --- > Release: 1.4 ----------------------------------------------------------------- ----- building capi-location-route.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.0:Main/standard/c31666651fc383ec7fa708618648dfd9-capi-location-route' /home/abuild/rpmbuild/SOURCES/capi-location-route.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.j0PV3J + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf capi-location-route-0.1.3 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-location-route-0.1.3.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd capi-location-route-0.1.3 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kI9dIR + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-location-route-0.1.3 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED ++ echo 0.1.3 ++ awk 'BEGIN {FS="."}{print $1}' + MAJORVER=0 + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.3 -DMAJORVER=0 -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- checking for module 'dlog location capi-base-common capi-location-manager' -- found dlog location capi-base-common capi-location-manager, version 1.0;0.1;0.0.1 -- checking for modules '' Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line Must specify package names on the command line route_test -- Configuring done -- Generating done -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 + make -j4 Scanning dependencies of target capi-location-route [ 75%] [ 75%] [ 75%] Building C object CMakeFiles/capi-location-route.dir/src/route.c.o Building C object CMakeFiles/capi-location-route.dir/src/route_service.c.o Building C object CMakeFiles/capi-location-route.dir/src/route_preference.c.o Linking C shared library libcapi-location-route.so [ 75%] Built target capi-location-route Scanning dependencies of target route_test [100%] Building C object test/CMakeFiles/route_test.dir/route_test.c.o Linking C executable route_test [100%] Built target route_test + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.xpxnng + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-location-route-0.1.3 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm install [ 75%] Built target capi-location-route [100%] Built target route_test Install the project... -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/lib/libcapi-location-route.so.0.1.3 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/lib/libcapi-location-route.so.0 -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/lib/libcapi-location-route.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/include/location -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/include/location/route_service.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/include/location/route.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/include/location/route_handle.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/include/location/route_preference.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/lib/pkgconfig/capi-location-route.pc + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-location-route-0.1.3 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm/usr/lib/libcapi-location-route.so.0.1.3 symlinked /usr/lib/debug/usr/lib/libcapi-location-route.so.0.1.3.debug to /usr/lib/debug/usr/lib/libcapi-location-route.so.debug symlinked /usr/lib/debug/usr/lib/libcapi-location-route.so.0.1.3.debug to /usr/lib/debug/usr/lib/libcapi-location-route.so.0.debug 209 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm Processing files: capi-location-route-0.1.3-1.4.armv7l Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libcapi-location-route.so.0 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: libSLP-location.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libcapi-location-manager.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgmodule-2.0.so.0 libgobject-2.0.so.0 liblocation-appman.so.0.1.0 libpthread.so.0 librt.so.1 libvconf.so.0 Processing files: capi-location-route-devel-0.1.3-1.4.armv7l Provides: pkgconfig(capi-location-route) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libcapi-location-route.so.0 pkgconfig(capi-base-common) pkgconfig(capi-location-manager) Processing files: capi-location-route-debuginfo-0.1.3-1.4.armv7l Processing files: capi-location-route-debugsource-0.1.3-1.4.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm Wrote: /home/abuild/rpmbuild/SRPMS/capi-location-route-0.1.3-1.4.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-0.1.3-1.4.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-devel-0.1.3-1.4.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-debuginfo-0.1.3-1.4.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-debugsource-0.1.3-1.4.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.jglqy2 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd capi-location-route-0.1.3 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-location-route-0.1.3-1.4.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs ... comparing built packages with the former built /usr/lib/build/rpm-check.sh compare /.build.oldpackages/capi-location-route-0.1.3-1.3.src.rpm /home/abuild/rpmbuild/SRPMS/capi-location-route-0.1.3-1.4.src.rpm compare /.build.oldpackages/capi-location-route-0.1.3-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-0.1.3-1.4.armv7l.rpm /usr/lib/libcapi-location-route.so.0.1.3 differs in assembler output --- /tmp/tmp.3aGCZuIQ0b 2013-02-17 14:26:31.133267607 +0000 +++ /tmp/tmp.G2akSNeZ8E 2013-02-17 14:26:31.197270359 +0000 @@ -1381,7639 +1381,7639 @@ .word 0xffff7110 .word 0xffff6f10 -_convert_error_code: - push {r4, r5, r6, r7, lr} - mov r6, r0 - ldr r5, [pc, # ] ; (<_convert_error_code + ofs>) - sub sp, # - add r5, pc - cmp r0, # - bhi.n <_convert_error_code + ofs> - tbb [pc, r0] - .short 0x252c - .word 0x25303025 - .short 0x3c37 - .byte 0x05 - .byte 0x00 - ldr r7, [pc, # ] ; (<_convert_error_code + ofs>) - movw r4, # ; 0xf113 - movt r4, # ; 0xffff - adds r7, r5, r7 - blx <_init + ofs> - cbz r0, <_convert_error_code + ofs> - ldr r1, [pc, # ] ; (<_convert_error_code + ofs>) - movs r0, # - ldr r2, [pc, # ] ; (<_convert_error_code + ofs>) - adds r1, r5, r1 - ldr r3, [pc, # ] ; (<_convert_error_code + ofs>) - adds r1, # ; 0x3a - str r1, [sp, # ] - ldr r1, [pc, # ] ; (<_convert_error_code + ofs>) - adds r2, r5, r2 - adds r3, r5, r3 - str r7, [sp, # ] - adds r5, r5, r1 - movs r1, # ; 0x41 - str r1, [sp, # ] - movs r1, # - str r5, [sp, # ] - str r4, [sp, # ] - str r6, [sp, # ] - blx <_init + ofs> - mov r0, r4 - add sp, # - pop {r4, r5, r6, r7, pc} - ldr r7, [pc, # ] ; (<_convert_error_code + ofs>) - movw r4, # ; 0xf112 - movt r4, # ; 0xffff - adds r7, r5, r7 - b.n <_convert_error_code + ofs> - ldr r7, [pc, # ] ; (<_convert_error_code + ofs>) - movs r4, # - adds r7, r5, r7 - b.n <_convert_error_code + ofs> - ldr r7, [pc, # ] ; (<_convert_error_code + ofs>) - movw r4, # ; 0xf111 - movt r4, # ; 0xffff - adds r7, r5, r7 - b.n <_convert_error_code + ofs> - ldr r7, [pc, # ] ; (<_convert_error_code + ofs>) - mvn.w r4, # - adds r7, r5, r7 - b.n <_convert_error_code + ofs> - ldr r7, [pc, # ] ; (<_convert_error_code + ofs>) - movw r4, # ; 0xf114 - movt r4, # ; 0xffff - adds r7, r5, r7 - b.n <_convert_error_code + ofs> - .word 0x0000e358 - .word 0xffff6f6c - .word 0xffff786c - .word 0xffff6fb4 - .word 0xffff6fc8 - .word 0xffff712c - .word 0xffff6f90 - .word 0xffff6efc - .word 0xffff6f30 - .word 0xffff6f10 - .word 0xffff6f4c - -route_preference_create: - push {r4, r5, r6, r7, lr} +route_clone: + stmdb sp!, {r4, r5, r6, r7, r8, lr} mov r7, r0 - ldr r4, [pc, # ] ; () - sub sp, # ; 0x24 + ldr r4, [pc, # ] ; () + sub sp, # + mov r6, r1 add r4, pc - cbz r0, + cmp r0, # + beq.n + cmp r1, # + beq.n + ldr.w r8, [r1] + cmp.w r8, # + beq.n movs r0, # blx <_init + ofs> - mov r6, r0 - cbz r0, - movs r5, # - str r5, [r0, # ] - blx <_init + ofs> - str r0, [r6, # ] - cbz r0, - mov r0, r5 - str r6, [r7, # ] - add sp, # ; 0x24 - pop {r4, r5, r6, r7, pc} + mov r5, r0 + cmp r0, # + beq.n + mov r0, r8 blx <_init + ofs> - cbnz r0, - mvn.w r0, # - b.n + mov r3, r0 + str r0, [r5, # ] + cmp r0, # + beq.n + ldr r3, [r6, # ] + movs r0, # + str r5, [r7, # ] + str r3, [r5, # ] + add sp, # + ldmia.w sp!, {r4, r5, r6, r7, r8, pc} blx <_init + ofs> - cbnz r0, + cbnz r0, mvn.w r0, # - b.n - str r0, [sp, # ] - blx <_init + ofs> - ldr r1, [sp, # ] - cmp r0, # - bne.n - movw r0, # ; 0xf112 - movt r0, # ; 0xffff - b.n - ldr.w ip, [pc, # ] ; - mvn.w r5, # - ldr r2, [pc, # ] ; () - mov r0, r7 - ldr r3, [pc, # ] ; () - add ip, r4 - ldr.w lr, [pc, # ] ; - adds r2, r4, r2 - ldr r6, [pc, # ] ; () - adds r3, r4, r3 - add lr, r4 + b.n + ldr r0, [pc, # ] ; () movs r1, # - add.w ip, ip, # ; 0x3a - add.w lr, lr, # - str.w ip, [sp] - adds r4, r4, r6 - mov.w ip, # ; 0x4a - str.w lr, [sp, # ] - str r4, [sp, # ] - str.w ip, [sp, # ] - str r5, [sp, # ] - blx <_init + ofs> - mov r0, r5 - b.n - ldr.w ip, [pc, # ] ; - mov r0, r6 - ldr r2, [pc, # ] ; () - mvn.w r5, # - ldr r3, [pc, # ] ; () - add ip, r4 - ldr.w lr, [pc, # ] ; + ldr r2, [pc, # ] ; () + adds r0, r4, r0 + ldr r3, [pc, # ] ; () + adds r0, # ; 0x3a + str r0, [sp, # ] + ldr r0, [pc, # ] ; () adds r2, r4, r2 - ldr r6, [pc, # ] ; () adds r3, r4, r3 - add lr, r4 - movs r1, # - add.w ip, ip, # ; 0x3a - add.w lr, lr, # - str.w ip, [sp] - adds r4, r4, r6 - mov.w ip, # ; 0x4e - str.w lr, [sp, # ] + adds r0, r4, r0 + str r0, [sp, # ] + movs r0, # ; 0x27 + str r0, [sp, # ] compare /.build.oldpackages/capi-location-route-debuginfo-0.1.3-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-debuginfo-0.1.3-1.4.armv7l.rpm --- /tmp/tmp.pZtDmcNIjg 2013-02-17 14:26:31.365277581 +0000 +++ /tmp/tmp.7lqnDNDCQO 2013-02-17 14:26:31.381278269 +0000 @@ -1,8 +1,8 @@ /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/5e/ 0 (none) 40755 root root 0 4294967295 -/usr/lib/debug/.build-id/5e/4f8ce1297da1e1268c8f231b37f94b7c1003ae 0 (none) 120777 root root 0 4294967295 ../../../libcapi-location-route.so.0.1.3 -/usr/lib/debug/.build-id/5e/4f8ce1297da1e1268c8f231b37f94b7c1003ae.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-location-route.so.0.1.3.debug +/usr/lib/debug/.build-id/25/ 0 (none) 40755 root root 0 4294967295 +/usr/lib/debug/.build-id/25/229c9cf60ea2f0af3869b0d612cb2e62f2be48 0 (none) 120777 root root 0 4294967295 ../../../libcapi-location-route.so.0.1.3 +/usr/lib/debug/.build-id/25/229c9cf60ea2f0af3869b0d612cb2e62f2be48.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcapi-location-route.so.0.1.3.debug /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 /usr/lib/debug/usr/lib/libcapi-location-route.so.0.1.3.debug 0 (none) 100444 root root 0 4294967295 RPM meta information is different compare /.build.oldpackages/capi-location-route-debugsource-0.1.3-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-debugsource-0.1.3-1.4.armv7l.rpm compare /.build.oldpackages/capi-location-route-devel-0.1.3-1.3.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/capi-location-route-devel-0.1.3-1.4.armv7l.rpm w16 finished "build capi-location-route.spec" at Sun Feb 17 14:26:31 UTC 2013. Retried build at Sun Feb 17 07:43:11 2013 returned same result, skipped