Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_6 Using BUILD_ARCH=i586:i486:i386 w01 started "build byacc.spec" at Thu Mar 21 20:04:08 UTC 2013. Building byacc for project 'Tizen:2.0:IVI' repository 'standard' arch 'i586' srcmd5 'e657e015b8f10f23ff9c3c1b83021e39' processing specfile /srv/build/root_6/.build-srcdir/byacc.spec ... running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/byacc.spec unknown changelog format init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/byacc.spec build rpmlint-Factory ... [1/30] preinstalling rpm... [2/30] preinstalling rpm-libs... [3/30] preinstalling setup... [4/30] preinstalling filesystem... [5/30] preinstalling bash... [6/30] preinstalling bzip2... [7/30] preinstalling coreutils... [8/30] preinstalling diffutils... [9/30] preinstalling liblua... [10/30] preinstalling eglibc... [11/30] preinstalling eglibc-common... [12/30] preinstalling libacl... [13/30] preinstalling libattr... [14/30] preinstalling libgcc... [15/30] preinstalling libcap... [16/30] preinstalling popt... [17/30] preinstalling readline... [18/30] preinstalling sed... [19/30] preinstalling tar... [20/30] preinstalling zlib... [21/30] preinstalling sqlite... [22/30] preinstalling ncurses-libs... [23/30] preinstalling elfutils-libelf... [24/30] preinstalling bzip2-libs... [25/30] preinstalling libstdc++... [26/30] preinstalling libfile... [27/30] preinstalling xz-libs... [28/30] preinstalling nss... [29/30] preinstalling nspr... [30/30] preinstalling nss-softokn-freebl... initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: nss-sysinit -> nss breaking dependency nss -> nss-sysinit cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/105] [2/105] installing cloog-0.15.9-2.2 [3/105] installing kernel-headers-2.6.36-1.1 [4/105] installing tizen-release-2.0.0-2.1 [5/105] installing tzdata-2011h-2.1 [6/105] installing libgcc-4.5.3-2.4 [7/105] installing setup-0.1-2.1 [8/105] installing filesystem-0.1-2.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [9/105] installing eglibc-2.13-2.21 [10/105] installing bzip2-libs-1.0.5-6.1 [11/105] installing cpio-2.8-4.1 [12/105] installing e2fsprogs-libs-1.41.11-2.10 [13/105] installing elfutils-libelf-0.152-2.36 [14/105] installing findutils-4.2.31-2.1 [15/105] installing gdbm-1.8.3-5.1 [16/105] installing libattr-2.4.44-8.10 [17/105] installing libidn-1.15-6.1 [18/105] installing liblua-5.1.4-7.2 [19/105] installing libuuid-2.20.2-5.1 [20/105] installing lzo-2.03-2.2 [21/105] installing m4-1.4.14-2.1 [22/105] installing make-3.81-1.1 [23/105] installing net-tools-1.60-89.9 [24/105] installing nspr-4.8.7-1.13 [25/105] installing nss-softokn-freebl-3.12.9-4.19 [26/105] installing patch-2.6.1.169-1.1 [27/105] installing pkgconfig-0.25-3.2 [28/105] installing popt-1.16-4.1 [29/105] installing readline-5.2-13.2 [30/105] installing sed-4.1.5-2.2 [31/105] installing sqlite-3.7.13-1.2 [32/105] installing xz-libs-5.0.3-2.2 [33/105] installing zlib-1.2.5-3.24 [34/105] installing bash-4.1-4.1 [35/105] installing diffutils-3.0-3.2 [36/105] installing libgomp-4.5.3-2.4 [37/105] installing libstdc++-4.5.3-2.4 [38/105] installing eglibc-common-2.13-2.21 [39/105] installing ncurses-libs-5.7-6.1 [40/105] installing build-compare-2009.10.14-27.13 [41/105] installing libstdc++-devel-4.5.3-2.4 [42/105] installing c-ares-1.7.4-3.1 [43/105] installing eglibc-headers-2.13-2.21 [44/105] installing libacl-2.2.49-2.1 [45/105] installing libcap-2.21-2.1 [46/105] installing libfile-5.04-2.2 [47/105] installing lzo-minilzo-2.03-2.2 [48/105] installing ncurses-5.7-6.1 [49/105] installing openssl-1.0.1c-2.34 [50/105] installing unzip-6.0-10.9 [51/105] installing zlib-devel-1.2.5-3.24 [52/105] installing bzip2-1.0.5-6.1 [53/105] installing gmp-5.0.1-2.1 [54/105] installing libblkid-2.20.2-5.1 [55/105] installing libpcre-7.9-2.2 [56/105] installing xz-5.0.3-2.2 [57/105] installing binutils-2.21.51.20110421-5.2 [58/105] installing elfutils-libs-0.152-2.36 [59/105] installing nss-3.12.9-4.19 [60/105] installing perl-5.12.1-64.7 [61/105] installing ncurses-base-5.7-6.1 [62/105] installing perl-HTML-Tagset-3.20-9.3 [63/105] installing perl-IO-Compress-Base-2.008-64.7 [64/105] installing perl-Module-Pluggable-3.60-64.7 [65/105] installing perl-Pod-Escapes-1.04-64.7 [66/105] installing perl-TimeDate-1.20-2.3 [67/105] installing eglibc-devel-2.13-2.21 [68/105] installing grep-2.5.1a-63.2 [69/105] installing mpfr-3.0.0-2.2 [70/105] installing perl-Compress-Raw-Zlib-2.008-64.7 [71/105] installing perl-libs-5.12.1-64.7 [72/105] installing tar-1.17-3.2 [73/105] installing coreutils-6.9-10.1 [74/105] installing file-5.04-2.2 [75/105] installing libmount-2.20.2-5.1 [76/105] installing lzo-devel-2.03-2.2 [77/105] installing perl-devel-5.12.1-64.7 [78/105] installing xz-lzma-compat-5.0.3-2.2 [79/105] installing nss-sysinit-3.12.9-4.19 [80/105] installing ppl-0.10.2-11.2 [81/105] installing elfutils-0.152-2.36 [82/105] installing libcurl-7.21.3-7.3 [83/105] installing perl-ExtUtils-ParseXS-2.18-64.7 [84/105] installing perl-Pod-Simple-3.07-64.7 [85/105] installing perl-Test-Simple-0.80-64.7 [86/105] installing gawk-3.1.5-3.2 [87/105] installing gzip-1.3.14-2.2 [88/105] installing mpc-0.9-2.2 [89/105] installing perl-IO-Compress-Zlib-2.008-64.7 [90/105] installing perl-Test-Harness-3.12-64.7 [91/105] installing cloog-ppl-0.15.9-2.2 [92/105] installing build-2011.01.10a-2.1 [93/105] installing curl-7.21.3-7.3 [94/105] installing util-linux-2.20.2-5.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [95/105] installing perl-ExtUtils-MakeMaker-6.36-64.7 [96/105] installing cpp-4.5.3-2.4 [97/105] installing rpm-4.9.1-5.2 [98/105] installing perl-CPAN-1.9205-64.7 [99/105] installing autoconf-2.68-2.1 [100/105] installing rpm-libs-4.9.1-5.2 [101/105] installing gcc-4.5.3-2.4 [102/105] installing automake-1.11.1-4.1 [103/105] installing gcc-c++-4.5.3-2.4 [104/105] installing rpm-build-4.9.1-5.2 [105/105] installing libtool-2.2.6b-2.2 now finalizing build dir... /var/run/obs/worker/6/build/build: line 1761: /srv/build/root_6/etc/passwd: No such file or directory ----------------------------------------------------------------- I have the following modifications for byacc.spec: 6c6 < Release: 2 --- > Release: 2.3 ----------------------------------------------------------------- ----- building byacc.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.tizen.org/Tizen:2.0:IVI/standard/e657e015b8f10f23ff9c3c1b83021e39-byacc' /home/abuild/rpmbuild/SOURCES/byacc.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.kZkt8J + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf byacc-1.9.20091027 + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/byacc-1.9.20091027.tar.bz2 + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd byacc-1.9.20091027 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zxIAIC + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd byacc-1.9.20091027 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + cp /home/abuild/rpmbuild/SOURCES/byacc.manifest . + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i586-tizen-linux-gnu Configuring for linux-gnu checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for executable suffix... checking for object suffix... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for an ANSI C-conforming const... yes checking whether make sets ${MAKE}... yes checking for a BSD compatible install... /usr/bin/install -c checking for gcc option to accept ANSI C... -DCC_HAS_PROTOS checking version of gcc... 4.5.3 checking if you want to check for gcc warnings... no checking if you want to see long compiling messages... yes checking how to run the C preprocessor... gcc -E checking if you want to use dmalloc for testing... no checking if you want to use dbmalloc for testing... no checking if you want to use valgrind for testing... no checking if you want to perform memory-leak testing... no configure: creating ./config.status config.status: creating makefile config.status: creating config.h + make -j4 # compiling # compiling # compiling # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` closure.c gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` error.c gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` graph.c gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` lalr.c # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` lr0.c # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` main.c # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` mkpar.c main.c: In function 'main': main.c:470:1: warning: control reaches end of non-void function # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` output.c # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` reader.c # compiling # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` skeleton.c gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` symtab.c reader.c: In function 'keyword': reader.c:296:1: warning: control reaches end of non-void function # compiling # compiling gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` verbose.c gcc -c -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` warshall.c gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I. -I. -DHAVE_CONFIG_H -DYYPATCH=`cat ./VERSION` -o yacc closure.o error.o graph.o lalr.o lr0.o main.o mkpar.o output.o reader.o skeleton.o symtab.o verbose.o warshall.o + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.eAlC4A + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd byacc-1.9.20091027 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 + mkdir -p /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 install /bin/sh ./mkdirs.sh /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/bin mkdir /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr mkdir /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/bin /bin/sh ./mkdirs.sh /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/man/man1 mkdir /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share mkdir /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/man mkdir /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/man/man1 /usr/bin/install -c yacc /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/bin/`echo yacc | sed 's/$//' |sed 's,^,,'|sed 's/$//'` /usr/bin/install -c -m 644 ./yacc.1 /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/man/man1/`echo yacc.1| sed 's/1$//'|sed 's,^,,'|sed 's/$/1/'` + rm -f /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 -regex '.*\.a$' + xargs rm -f -- + ln -s yacc /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386//usr/bin/byacc + ln -s yacc.1 /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386//usr/share/man/man1/byacc.1 + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/byacc-1.9.20091027 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/bin/yacc symlinked /usr/lib/debug/usr/bin/yacc.debug to /usr/lib/debug/usr/bin/byacc.debug 263 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.j9F48z + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd byacc-1.9.20091027 + unset DISPLAY + echo ====================TESTING========================= ====================TESTING========================= + make check cd test && /bin/sh ./run_test.sh ** Thu Mar 21 20:04:55 UTC 2013 ...ok calc.output ...ok calc.tab.c ...ok calc.tab.h ...ok error.output ...ok error.tab.c ...ok error.tab.h ...ok ftp.output ...ok ftp.tab.c ...ok ftp.tab.h ../yacc: 1 shift/reduce conflict, 29 reduce/reduce conflicts. ...ok grammar.output ...ok grammar.tab.c ...ok grammar.tab.h + echo ====================TESTING END===================== ====================TESTING END===================== + exit 0 Processing files: byacc-1.9.20091027-2.3.i586 Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.ketfRz + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd byacc-1.9.20091027 + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/doc/byacc-1.9.20091027 + export DOCDIR + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/doc/byacc-1.9.20091027 + cp -pr ACKNOWLEDGEMENTS CHANGES NEW_FEATURES NOTES NO_WARRANTY README /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386/usr/share/doc/byacc-1.9.20091027 + exit 0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) Processing files: byacc-debuginfo-1.9.20091027-2.3.i586 Processing files: byacc-debugsource-1.9.20091027-2.3.i586 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 Wrote: /home/abuild/rpmbuild/SRPMS/byacc-1.9.20091027-2.3.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/byacc-1.9.20091027-2.3.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/byacc-debuginfo-1.9.20091027-2.3.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/byacc-debugsource-1.9.20091027-2.3.i586.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.jQsIbA + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd byacc-1.9.20091027 + rm -rf /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 + rm -rf /home/abuild/rpmbuild/BUILDROOT/byacc-1.9.20091027-2.3.i386 + exit 0 ... checking for files with abuild user/group ... creating baselibs w01 finished "build byacc.spec" at Thu Mar 21 20:04:55 UTC 2013.