Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_1 Using BUILD_ARCH=i586:i486:i386 w02 started "build ethumb.spec" at Thu Mar 21 20:16:54 UTC 2013. Building ethumb for project 'Tizen:2.0:IVI' repository 'standard' arch 'i586' srcmd5 '7473820948a40693588e0893921e26fa' processing specfile /srv/build/root_1/.build-srcdir/ethumb.spec ... running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/ethumb.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/ethumb.spec build rpmlint-Factory ... [1/30] preinstalling rpm... [2/30] preinstalling rpm-libs... [3/30] preinstalling setup... [4/30] preinstalling filesystem... [5/30] preinstalling bash... [6/30] preinstalling bzip2... [7/30] preinstalling coreutils... [8/30] preinstalling diffutils... [9/30] preinstalling liblua... [10/30] preinstalling eglibc... [11/30] preinstalling eglibc-common... [12/30] preinstalling libacl... [13/30] preinstalling libattr... [14/30] preinstalling libgcc... [15/30] preinstalling libcap... [16/30] preinstalling popt... [17/30] preinstalling readline... [18/30] preinstalling sed... [19/30] preinstalling tar... [20/30] preinstalling zlib... [21/30] preinstalling sqlite... [22/30] preinstalling ncurses-libs... [23/30] preinstalling elfutils-libelf... [24/30] preinstalling bzip2-libs... [25/30] preinstalling libstdc++... [26/30] preinstalling libfile... [27/30] preinstalling xz-libs... [28/30] preinstalling nss... [29/30] preinstalling nspr... [30/30] preinstalling nss-softokn-freebl... initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl -> perl-IO-Compress-Base breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: dbus-libs -> dbus breaking dependency dbus -> dbus-libs cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: nss-sysinit -> nss breaking dependency nss -> nss-sysinit cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/184] [2/184] installing cloog-0.15.9-2.2 [3/184] installing kernel-headers-2.6.36-1.1 [4/184] installing libX11-common-1.5.0-2.5 [5/184] installing tizen-release-2.0.0-2.1 [6/184] installing tzdata-2011h-2.1 [7/184] installing libgcc-4.5.3-2.4 [8/184] installing setup-0.1-2.1 [9/184] installing filesystem-0.1-2.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [10/184] installing eglibc-2.13-2.21 [11/184] installing bzip2-libs-1.0.5-6.1 [12/184] installing cpio-2.8-4.1 [13/184] installing e2fsprogs-libs-1.41.11-2.10 [14/184] installing eina-1.7.1+svn.77445+build01r01-1.5 [15/184] installing elfutils-libelf-0.152-2.36 [16/184] installing expat-2.0.1-9.1 [17/184] installing findutils-4.2.31-2.1 [18/184] installing fribidi-0.19.5-5.3 [19/184] installing gdbm-1.8.3-5.1 [20/184] installing libICE-1.0.8-1.3 [21/184] installing libXau-1.0.7-1.3 [22/184] installing libattr-2.4.44-8.10 [23/184] installing libexif-0.6.21-4.3 [24/184] installing libffi-3.0.9-100.3 [25/184] installing libidn-1.15-6.1 [26/184] installing libjpeg-turbo-1.2.0-7.4 [27/184] installing liblua-5.1.4-7.2 [28/184] installing libuuid-2.20.2-5.1 [29/184] installing lzo-2.03-2.2 [30/184] installing m4-1.4.14-2.1 [31/184] installing make-3.81-1.1 [32/184] installing net-tools-1.60-89.9 [33/184] installing nspr-4.8.7-1.13 [34/184] installing nss-softokn-freebl-3.12.9-4.19 [35/184] installing patch-2.6.1.169-1.1 [36/184] installing pixman-0.26.0-8.3 [37/184] installing pkgconfig-0.25-3.2 [38/184] installing popt-1.16-4.1 [39/184] installing readline-5.2-13.3 [40/184] installing sed-4.1.5-2.2 [41/184] installing smack-1.0slp2+s7-2.1 [42/184] installing sqlite-3.7.13-1.3 [43/184] installing xz-libs-5.0.3-2.2 [44/184] installing zlib-1.2.5-3.24 [45/184] installing bash-4.1-4.1 [46/184] installing diffutils-3.0-3.2 [47/184] installing libgomp-4.5.3-2.4 [48/184] installing libstdc++-4.5.3-2.4 [49/184] installing eglibc-common-2.13-2.21 [50/184] installing ncurses-libs-5.7-6.1 [51/184] installing build-compare-2009.10.14-27.13 [52/184] installing libstdc++-devel-4.5.3-2.4 [53/184] installing c-ares-1.7.4-3.1 [54/184] installing eglibc-headers-2.13-2.21 [55/184] installing eina-devel-1.7.1+svn.77445+build01r01-1.5 [56/184] installing embryo-1.7.1+svn.76491+build01r01-1.3 [57/184] installing freetype-2.4.9-2.3 [58/184] installing fribidi-devel-0.19.5-5.3 [59/184] installing libacl-2.2.49-2.1 [60/184] installing libcap-2.21-2.1 [61/184] installing libexif-devel-0.6.21-4.3 [62/184] installing libfile-5.04-2.2 [63/184] installing liblua-devel-5.1.4-7.2 [64/184] installing libpci3-3.0.0-1.3 [65/184] installing libpciaccess-0.13.1-1.4 [66/184] installing libpng-1.2.50-1.3 [67/184] installing libxcb-1.8.1-1.3 [68/184] installing lzo-minilzo-2.03-2.2 [69/184] installing ncurses-5.7-6.1 [70/184] installing openssl-1.0.1c-2.34 [71/184] installing pixman-devel-0.26.0-8.3 [72/184] installing unzip-6.0-10.9 [73/184] installing zlib-devel-1.2.5-3.24 [74/184] installing bzip2-1.0.5-6.1 [75/184] installing glib2-2.32.3-5.5 [76/184] installing gmp-5.0.1-2.1 [77/184] installing libSM-1.2.1-1.3 [78/184] installing libblkid-2.20.2-5.1 [79/184] installing libpcre-7.9-2.2 [80/184] installing xz-5.0.3-2.2 [81/184] installing binutils-2.21.51.20110421-5.2 [82/184] installing eet-1.7.1+svn.77495+build01r01-1.3 [83/184] installing libicu-4.8-1.5 [84/184] installing elfutils-libs-0.152-2.36 [85/184] installing nss-3.12.9-4.19 [86/184] installing perl-5.12.1-64.7 [87/184] installing ncurses-base-5.7-6.1 [88/184] installing perl-HTML-Tagset-3.20-9.3 [89/184] installing perl-IO-Compress-Base-2.008-64.7 [90/184] installing perl-Module-Pluggable-3.60-64.7 [91/184] installing perl-Pod-Escapes-1.04-64.7 [92/184] installing perl-TimeDate-1.20-2.3 [93/184] installing eglibc-devel-2.13-2.21 [94/184] installing embryo-devel-1.7.1+svn.76491+build01r01-1.3 [95/184] installing grep-2.5.1a-63.2 [96/184] installing libdrm-2.4.42-4.1 [97/184] installing mpfr-3.0.0-2.2 [98/184] installing perl-Compress-Raw-Zlib-2.008-64.7 [99/184] installing perl-libs-5.12.1-64.7 [100/184] installing tar-1.17-3.2 [101/184] installing coreutils-6.9-10.1 [102/184] installing ecore-1.7.1+svn.77580+build01r01-2.1 [103/184] installing file-5.04-2.2 [104/184] installing libmount-2.20.2-5.1 [105/184] installing lzo-devel-2.03-2.2 [106/184] installing pciutils-3.0.0-1.3 [107/184] installing perl-devel-5.12.1-64.7 [108/184] installing xz-lzma-compat-5.0.3-2.2 [109/184] installing eet-devel-1.7.1+svn.77495+build01r01-1.3 [110/184] installing freetype-devel-2.4.9-2.3 [111/184] installing libX11-1.5.0-2.5 [112/184] installing nss-sysinit-3.12.9-4.19 [113/184] installing ppl-0.10.2-11.2 [114/184] installing elfutils-0.152-2.36 [115/184] installing libcurl-7.21.3-7.3 [116/184] installing libXcomposite-0.4.3-3.3 [117/184] installing libXext-1.3.1-1.3 [118/184] installing libXfixes-5.0-2.3 [119/184] installing libXrender-0.9.7-1.3 [120/184] installing libwsbm-1.1.0-1.6 [121/184] installing perl-ExtUtils-ParseXS-2.18-64.7 [122/184] installing perl-Pod-Simple-3.07-64.7 [123/184] installing perl-Test-Simple-0.80-64.7 [124/184] installing gawk-3.1.5-3.2 [125/184] installing gzip-1.3.14-2.2 [126/184] installing libidn-devel-1.15-6.1 [127/184] installing mpc-0.9-2.2 [128/184] installing perl-IO-Compress-Zlib-2.008-64.7 [129/184] installing perl-Test-Harness-3.12-64.7 [130/184] installing cloog-ppl-0.15.9-2.2 [131/184] installing ecore-imf-1.7.1+svn.77580+build01r01-2.1 [132/184] installing ecore-input-1.7.1+svn.77580+build01r01-2.1 [133/184] installing giflib-4.1.6-13.5 [134/184] installing build-2011.01.10a-2.1 [135/184] installing curl-7.21.3-7.3 [136/184] installing dbus-1.6.4-4.4 warning: group dbus does not exist - using root [137/184] installing ecore-con-1.7.1+svn.77580+build01r01-2.1 [138/184] installing fontconfig-2.9.0-2.3 [139/184] installing util-linux-2.20.2-5.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [140/184] installing glib2-devel-2.32.3-5.5 [141/184] installing dbus-libs-1.6.4-4.4 [142/184] installing fontconfig-devel-2.9.0-2.3 [143/184] installing libXdamage-1.1.3-3.3 [144/184] installing libXgesture-0.1.0-3.3 [145/184] installing libXi-1.6.1-1.3 [146/184] installing libXinerama-1.1.2-1.3 [147/184] installing libXxf86vm-1.1.2-1.3 [148/184] installing perl-ExtUtils-MakeMaker-6.36-64.7 [149/184] installing pvr-bin-mdfld-1.7.17.296760.7-1.1 [150/184] installing libXcursor-1.1.13-1.3 [151/184] installing libXrandr-1.4.0-3.3 [152/184] installing libcurl-devel-7.21.3-7.3 [153/184] installing ecore-fb-1.7.1+svn.77580+build01r01-2.1 [154/184] installing ecore-file-1.7.1+svn.77580+build01r01-2.1 [155/184] installing ecore-ipc-1.7.1+svn.77580+build01r01-2.1 [156/184] installing cpp-4.5.3-2.4 [157/184] installing cairo-1.12.8-2.5 [158/184] installing rpm-4.9.1-5.2 [159/184] installing dbus-devel-1.6.4-4.4 [160/184] installing perl-CPAN-1.9205-64.7 [161/184] installing libXtst-1.2.0-3.3 [162/184] installing autoconf-2.68-2.1 [163/184] installing harfbuzz-0.9.7-1.3 [164/184] installing mesa-libGL-9.0.3-1.5 [165/184] installing rpm-libs-4.9.1-5.2 [166/184] installing gcc-4.5.3-2.4 [167/184] installing harfbuzz-devel-0.9.7-1.3 [168/184] installing mesa-libGLESv2-9.0.3-1.5 [169/184] installing automake-1.11.1-4.1 [170/184] installing gcc-c++-4.5.3-2.4 [171/184] installing ecore-x-1.7.1+svn.77580+build01r01-2.1 [172/184] installing rpm-build-4.9.1-5.2 [173/184] installing libtool-2.2.6b-2.2 [174/184] installing evas-1.7.1+svn.77561+build01r01-12.1 [175/184] installing ecore-imf-evas-1.7.1+svn.77580+build01r01-2.1 [176/184] installing ecore-input-evas-1.7.1+svn.77580+build01r01-2.1 [177/184] installing evas-devel-1.7.1+svn.77561+build01r01-12.1 [178/184] installing ecore-evas-1.7.1+svn.77580+build01r01-2.1 [179/184] installing edbus-1.7.1+svn.76526+build01r01-1.11 [180/184] installing edje-1.7.1+svn.77330+build01r03-1.5 [181/184] installing ecore-devel-1.7.1+svn.77580+build01r01-2.1 [182/184] installing edbus-devel-1.7.1+svn.76526+build01r01-1.11 [183/184] installing edje-devel-1.7.1+svn.77330+build01r03-1.5 [184/184] installing edje-tools-1.7.1+svn.77330+build01r03-1.5 now finalizing build dir... /var/run/obs/worker/1/build/build: line 1761: /srv/build/root_1/etc/passwd: No such file or directory ----------------------------------------------------------------- I have the following modifications for ethumb.spec: 6c6 < Release: 1 --- > Release: 1.12 ----------------------------------------------------------------- ----- building ethumb.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.tizen.org/Tizen:2.0:IVI/standard/7473820948a40693588e0893921e26fa-ethumb' /home/abuild/rpmbuild/SOURCES/ethumb.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5Tk9EE + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf ethumb-1.7.1+svn.75994+build01r01 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ethumb-1.7.1+svn.75994+build01r01.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd ethumb-1.7.1+svn.75994+build01r01 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Qq7VkR + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd ethumb-1.7.1+svn.75994+build01r01 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + export 'CFLAGS+= -fPIC' + CFLAGS+=' -fPIC' + export 'LDFLAGS+= -Wl,--hash-style=both -Wl,--as-needed' + LDFLAGS+=' -Wl,--hash-style=both -Wl,--as-needed' + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + ./autogen.sh --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static Running aclocal... sh: svnversion: command not found Running autoheader... sh: svnversion: command not found Running autoconf... Running libtoolize... Running automake... configure.ac:65: installing `./compile' configure.ac:26: installing `./config.guess' configure.ac:26: installing `./config.sub' configure.ac:39: installing `./install-sh' configure.ac:39: installing `./missing' doc/Makefile.am:34: wildcard img/*.*: non-POSIX variable name doc/Makefile.am:34: (probably a GNU make extension) src/bin/Makefile.am: installing `./depcomp' cmp: config.cache-env: No such file or directory Cleaning configure cache... configure: creating cache config.cache checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for library containing strerror... none required checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for i686-pc-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking for gcc option to accept ISO C99... -std=gnu99 checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 checking whether gcc -std=gnu99 and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -std=gnu99 -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for __attribute__... yes checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc -std=gnu99... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for i686-pc-linux-gnu-objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc -std=gnu99 object... ok checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes checking if gcc -std=gnu99 static flag -static works... no checking if gcc -std=gnu99 supports -c -o file.o... yes checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes checking whether the gcc -std=gnu99 linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to build documentation... yes checking for doxygen... no WARNING: The doxygen program was not found in your execute path. You may have doxygen installed somewhere not covered by your path. If this is the case make sure you have the packages installed, AND that the doxygen program is in your execute path (see your shell manual page on setting the $PATH environment variable), OR alternatively, specify the program to use with --with-doxygen. configure: WARNING: no doxygen detected. Documentation will not be built checking for i686-pc-linux-gnu-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for EINA... yes checking for EVAS... yes checking for ECORE... yes checking for ECORE_EVAS... yes checking for ECORE_FILE... yes checking for EDJE... yes checking for EET... yes configure: edje_cc set to /usr/bin/edje_cc checking optional module emotion: checking for EMOTION... no no optional module emotion failed checks. Warning: optional module emotion disabled by extra checks. checking optional module epdf: checking for EPDF... no no optional module epdf failed checks. Warning: optional module epdf disabled by extra checks. checking optional module ethumbd: checking for EDBUS... yes optional module ethumbd passed checks. checking optional module libexif: checking for LIBEXIF... yes optional module libexif passed checks. checking for Xattr... yes configure: updating cache config.cache configure: creating ./config.status config.status: creating ethumb.pc config.status: creating ethumb.spec config.status: creating ethumb_client.pc config.status: creating org.enlightenment.Ethumb.service config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/bin/Makefile config.status: creating src/lib/Makefile config.status: creating src/lib/client/Makefile config.status: creating src/plugins/Makefile config.status: creating src/plugins/emotion/Makefile config.status: creating src/plugins/epdf/Makefile config.status: creating src/tests/Makefile config.status: creating data/Makefile config.status: creating data/frames/Makefile config.status: creating m4/Makefile config.status: creating doc/Makefile config.status: creating doc/Doxyfile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands Summary: * project..........: ethumb 1.7.99.0 * prefix...........: /usr * DBus services dir: /usr/share/dbus-1/services * CFLAGS...........: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC * LDFLAGS..........: -Wl,--hash-style=both -Wl,--as-needed Configuration Options Summary: * use xattr........: yes * maximum log level: * documentation....: no * enabled modules..: +ethumbd +libexif * disabled modules.: -emotion -epdf now type: Now type 'make' ('gmake' on some systems) to compile ethumb, and then afterwards as root (or the user who will install this), type 'make install'. Change users with 'su' or 'sudo' appropriately. + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' + export FFLAGS + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for library containing strerror... none required checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for i686-pc-linux-gnu-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking for gcc option to accept ISO C99... -std=gnu99 checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 checking whether gcc -std=gnu99 and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -std=gnu99 -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for __attribute__... yes checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc -std=gnu99... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for i686-pc-linux-gnu-objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc -std=gnu99 object... ok checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes checking if gcc -std=gnu99 static flag -static works... no checking if gcc -std=gnu99 supports -c -o file.o... yes checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes checking whether the gcc -std=gnu99 linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether to build documentation... yes checking for doxygen... no WARNING: The doxygen program was not found in your execute path. You may have doxygen installed somewhere not covered by your path. If this is the case make sure you have the packages installed, AND that the doxygen program is in your execute path (see your shell manual page on setting the $PATH environment variable), OR alternatively, specify the program to use with --with-doxygen. configure: WARNING: no doxygen detected. Documentation will not be built checking for i686-pc-linux-gnu-pkg-config... no checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for EINA... yes checking for EVAS... yes checking for ECORE... yes checking for ECORE_EVAS... yes checking for ECORE_FILE... yes checking for EDJE... yes checking for EET... yes configure: edje_cc set to /usr/bin/edje_cc checking optional module emotion: checking for EMOTION... no no optional module emotion failed checks. Warning: optional module emotion disabled by extra checks. checking optional module epdf: checking for EPDF... no no optional module epdf failed checks. Warning: optional module epdf disabled by extra checks. checking optional module ethumbd: checking for EDBUS... yes optional module ethumbd passed checks. checking optional module libexif: checking for LIBEXIF... yes optional module libexif passed checks. checking for Xattr... yes configure: creating ./config.status config.status: creating ethumb.pc config.status: creating ethumb.spec config.status: creating ethumb_client.pc config.status: creating org.enlightenment.Ethumb.service config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/bin/Makefile config.status: creating src/lib/Makefile config.status: creating src/lib/client/Makefile config.status: creating src/plugins/Makefile config.status: creating src/plugins/emotion/Makefile config.status: creating src/plugins/epdf/Makefile config.status: creating src/tests/Makefile config.status: creating data/Makefile config.status: creating data/frames/Makefile config.status: creating m4/Makefile config.status: creating doc/Makefile config.status: creating doc/Doxyfile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands Summary: * project..........: ethumb 1.7.99.0 * prefix...........: /usr * DBus services dir: /usr/share/dbus-1/services * CFLAGS...........: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC * LDFLAGS..........: -Wl,--hash-style=both -Wl,--as-needed Configuration Options Summary: * use xattr........: yes * maximum log level: * documentation....: no * enabled modules..: +ethumbd +libexif * disabled modules.: -emotion -epdf now type: Now type 'make' ('gmake' on some systems) to compile ethumb, and then afterwards as root (or the user who will install this), type 'make install'. Change users with 'su' or 'sudo' appropriately. + make -j4 make all-recursive make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' Making all in m4 make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/m4' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/m4' Making all in src make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' Making all in lib make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' Making all in . make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' CC ethumb.lo CC md5.lo CCLD libethumb.la make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' Making all in client make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client' CC ethumb_client.lo CCLD libethumb_client.la make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' Making all in bin make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/bin' CC ethumb.o CC ethumbd.o CC ethumbd_client.o CC ethumbd_child.o CCLD ethumb CCLD ethumbd_client CCLD ethumbd_slave CCLD ethumbd make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/bin' Making all in plugins make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[4]: Nothing to be done for `all-am'. make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' Making all in tests make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/tests' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/tests' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' Making all in data make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' Making all in frames make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data/frames' /usr/bin/edje_cc -v -id ../../data/frames/images \ ../../data/frames/default.edc \ ../../data/frames/default.edj edje_cc: Wrote 152 bytes ( 0Kb) for "edje_file" header edje_cc: header: 0.00017 edje_cc: groups: 0.00055 edje_cc: scripts: 0.00000 edje_cc: lua scripts: 0.00000 edje_cc: source: 0.00015 edje_cc: fontmap: 0.00007 edje_cc: Wrote 380 bytes ( 0Kb) for "edje/images/0" image entry "border-0.jpg" compress: [raw: 99.4%] [real: 29.9%] edje_cc: images: 0.00271 edje_cc: fonts: 0.00000 edje_cc: sounds: 0.00000 edje_cc: THREADS: 0.00000 Summary: Wrote 1 collections Wrote 1 images Wrote 0 sounds Wrote 0 fonts make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data/frames' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' make[3]: Nothing to be done for `all-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' Making all in doc make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/doc' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/doc' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.no1o2Q + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd ethumb-1.7.1+svn.75994+build01r01 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 install Making install in m4 make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/m4' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/m4' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/m4' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/m4' Making install in src make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' Making install in lib make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' Making install in . make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib" /bin/sh ../../libtool --mode=install /usr/bin/install -c libethumb.la '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib' libtool: install: /usr/bin/install -c .libs/libethumb.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/libethumb.so.1.7.99 libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib && { ln -s -f libethumb.so.1.7.99 libethumb.so.1 || { rm -f libethumb.so.1 && ln -s libethumb.so.1.7.99 libethumb.so.1; }; }) libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib && { ln -s -f libethumb.so.1.7.99 libethumb.so || { rm -f libethumb.so && ln -s libethumb.so.1.7.99 libethumb.so; }; }) libtool: install: /usr/bin/install -c .libs/libethumb.lai /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/libethumb.la libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/include/ethumb-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/include/ethumb-1" /usr/bin/install -c -m 644 Ethumb.h Ethumb_Plugin.h '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/include/ethumb-1' make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' Making install in client make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client' test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib" /bin/sh ../../../libtool --mode=install /usr/bin/install -c libethumb_client.la '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib' libtool: install: warning: relinking `libethumb_client.la' libtool: install: (cd /home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client; /bin/sh /home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/libtool --silent --tag CC --mode=relink gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3 -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -fPIC -no-undefined -version-info 8:99:7 -Wl,--hash-style=both -Wl,--as-needed -o libethumb_client.la -rpath /usr/lib ethumb_client.lo ../../../src/lib/libethumb.la -pthread -lecore -leina -ledbus -ldbus-1 -pthread -leina -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386) libtool: install: /usr/bin/install -c .libs/libethumb_client.so.1.7.99T /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/libethumb_client.so.1.7.99 libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib && { ln -s -f libethumb_client.so.1.7.99 libethumb_client.so.1 || { rm -f libethumb_client.so.1 && ln -s libethumb_client.so.1.7.99 libethumb_client.so.1; }; }) libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib && { ln -s -f libethumb_client.so.1.7.99 libethumb_client.so || { rm -f libethumb_client.so && ln -s libethumb_client.so.1.7.99 libethumb_client.so; }; }) libtool: install: /usr/bin/install -c .libs/libethumb_client.lai /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/libethumb_client.la libtool: install: warning: remember to run `libtool --finish /usr/lib' test -z "/usr/include/ethumb-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/include/ethumb-1" /usr/bin/install -c -m 644 Ethumb_Client.h '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/include/ethumb-1' make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/client' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib' Making install in bin make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/bin' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/bin' test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin" /bin/sh ../../libtool --mode=install /usr/bin/install -c ethumb ethumbd ethumbd_client '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin' libtool: install: warning: `../../src/lib/libethumb.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/ethumb /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin/ethumb libtool: install: warning: `../../src/lib/libethumb.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/ethumbd /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin/ethumbd libtool: install: warning: `../../src/lib/client/libethumb_client.la' has not been installed in `/usr/lib' libtool: install: warning: `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/lib/libethumb.la' has not been installed in `/usr/lib' libtool: install: warning: `../../src/lib/libethumb.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/ethumbd_client /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin/ethumbd_client test -z "/usr/libexec" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/libexec" /bin/sh ../../libtool --mode=install /usr/bin/install -c ethumbd_slave '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/libexec' libtool: install: warning: `../../src/lib/libethumb.la' has not been installed in `/usr/lib' libtool: install: /usr/bin/install -c .libs/ethumbd_slave /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/libexec/ethumbd_slave make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/bin' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/bin' Making install in plugins make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[4]: Nothing to be done for `install-exec-am'. make[4]: Nothing to be done for `install-data-am'. make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/plugins' Making install in tests make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/tests' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/tests' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/tests' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src/tests' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/src' Making install in data make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' Making install in frames make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data/frames' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data/frames' make[3]: Nothing to be done for `install-exec-am'. test -z "/usr/share/ethumb/data/frames" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/ethumb/data/frames" /usr/bin/install -c -m 644 default.edj '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/ethumb/data/frames' make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data/frames' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data/frames' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' make[3]: Nothing to be done for `install-exec-am'. make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/data' Making install in doc make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/doc' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/doc' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/doc' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/doc' make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' make[2]: Nothing to be done for `install-exec-am'. test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/pkgconfig" /usr/bin/install -c -m 644 ethumb.pc ethumb_client.pc '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/pkgconfig' test -z "/usr/share/dbus-1/services" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/dbus-1/services" /usr/bin/install -c -m 644 org.enlightenment.Ethumb.service '/home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/dbus-1/services' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01' + rm -f /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 -regex '.*\.a$' + xargs rm -f -- + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/license + cp /home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01/COPYING /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/share/license/ethumb + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ethumb-1.7.1+svn.75994+build01r01 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin/ethumb extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin/ethumbd extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/bin/ethumbd_client extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/libethumb.so.1.7.99 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/lib/libethumb_client.so.1.7.99 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386/usr/libexec/ethumbd_slave symlinked /usr/lib/debug/usr/lib/libethumb_client.so.1.7.99.debug to /usr/lib/debug/usr/lib/libethumb_client.so.1.debug symlinked /usr/lib/debug/usr/lib/libethumb_client.so.1.7.99.debug to /usr/lib/debug/usr/lib/libethumb_client.so.debug symlinked /usr/lib/debug/usr/lib/libethumb.so.1.7.99.debug to /usr/lib/debug/usr/lib/libethumb.so.1.debug symlinked /usr/lib/debug/usr/lib/libethumb.so.1.7.99.debug to /usr/lib/debug/usr/lib/libethumb.so.debug 442 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 Processing files: ethumb-1.7.1+svn.75994+build01r01-1.12.i586 Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== Provides: libethumb.so.1 libethumb_client.so.1 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig /sbin/ldconfig Requires(postun): /sbin/ldconfig /sbin/ldconfig Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libecore.so.1 libecore_evas.so.1 libecore_file.so.1 libedbus.so.1 libedje.so.1 libeina.so.1 libethumb.so.1 libethumb_client.so.1 libevas.so.1 libexif.so.12 libpthread.so.0 libpthread.so.0(GLIBC_2.0) librt.so.1 Processing files: ethumb-devel-1.7.1+svn.75994+build01r01-1.12.i586 Provides: pkgconfig(ethumb) = 1.7.99.0 pkgconfig(ethumb_client) = 1.7.99.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libethumb.so.1 libethumb_client.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(ecore-evas) >= 1.6.99 pkgconfig(ecore-file) >= 1.6.99 pkgconfig(edje) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(evas) >= 1.6.99 pkgconfig(libexif) Processing files: ethumb-debuginfo-1.7.1+svn.75994+build01r01-1.12.i586 Processing files: ethumb-debugsource-1.7.1+svn.75994+build01r01-1.12.i586 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 Wrote: /home/abuild/rpmbuild/SRPMS/ethumb-1.7.1+svn.75994+build01r01-1.12.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/ethumb-1.7.1+svn.75994+build01r01-1.12.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/ethumb-devel-1.7.1+svn.75994+build01r01-1.12.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/ethumb-debuginfo-1.7.1+svn.75994+build01r01-1.12.i586.rpm Wrote: /home/abuild/rpmbuild/RPMS/i586/ethumb-debugsource-1.7.1+svn.75994+build01r01-1.12.i586.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JDVDO5 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd ethumb-1.7.1+svn.75994+build01r01 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ethumb-1.7.1+svn.75994+build01r01-1.12.i386 + exit 0 ... checking for files with abuild user/group ... creating baselibs w02 finished "build ethumb.spec" at Thu Mar 21 20:17:34 UTC 2013. Retried build at Thu Mar 21 17:59:58 2013 returned same result, skipped Retried build at Thu Mar 21 18:57:24 2013 returned same result, skipped