Memory limit set to 110504152KB
Using BUILD_ROOT=/srv/build/root_5
Using BUILD_ARCH=i586:i486:i386


w10 started "build xcb-proto.spec" at Thu Mar 21 20:04:06 UTC 2013.

Building xcb-proto for project 'Tizen:2.0:IVI' repository 'standard' arch 'i586' srcmd5 '41038752d3d721c0b06b8dba0c0af9f4'

processing specfile /srv/build/root_5/.build-srcdir/xcb-proto.spec ...
running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/xcb-proto.spec
init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/xcb-proto.spec build rpmlint-Factory ...
[1/30] preinstalling rpm...
[2/30] preinstalling rpm-libs...
[3/30] preinstalling setup...
[4/30] preinstalling filesystem...
[5/30] preinstalling bash...
[6/30] preinstalling bzip2...
[7/30] preinstalling coreutils...
[8/30] preinstalling diffutils...
[9/30] preinstalling liblua...
[10/30] preinstalling eglibc...
[11/30] preinstalling eglibc-common...
[12/30] preinstalling libacl...
[13/30] preinstalling libattr...
[14/30] preinstalling libgcc...
[15/30] preinstalling libcap...
[16/30] preinstalling popt...
[17/30] preinstalling readline...
[18/30] preinstalling sed...
[19/30] preinstalling tar...
[20/30] preinstalling zlib...
[21/30] preinstalling sqlite...
[22/30] preinstalling ncurses-libs...
[23/30] preinstalling elfutils-libelf...
[24/30] preinstalling bzip2-libs...
[25/30] preinstalling libstdc++...
[26/30] preinstalling libfile...
[27/30] preinstalling xz-libs...
[28/30] preinstalling nss...
[29/30] preinstalling nspr...
[30/30] preinstalling nss-softokn-freebl...
initializing rpm db...
reordering...cycle: bash -> eglibc -> eglibc-common
  breaking dependency eglibc-common -> bash
cycle: eglibc -> eglibc-common
  breaking dependency eglibc -> eglibc-common
cycle: eglibc -> libgcc
  breaking dependency libgcc -> eglibc
cycle: filesystem -> setup
  breaking dependency setup -> filesystem
cycle: ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses
cycle: ncurses-base -> ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses-base
cycle: perl -> perl-libs
  breaking dependency perl -> perl-libs
cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel
  breaking dependency perl -> perl-ExtUtils-MakeMaker
cycle: perl -> perl-IO-Compress-Zlib
  breaking dependency perl -> perl-IO-Compress-Zlib
cycle: perl -> perl-IO-Compress-Base
  breaking dependency perl -> perl-IO-Compress-Base
cycle: perl -> perl-Module-Pluggable
  breaking dependency perl -> perl-Module-Pluggable
cycle: perl -> perl-Pod-Simple
  breaking dependency perl -> perl-Pod-Simple
cycle: perl-devel -> perl-ExtUtils-MakeMaker
  breaking dependency perl-devel -> perl-ExtUtils-MakeMaker
cycle: perl-ExtUtils-ParseXS -> perl-devel
  breaking dependency perl-devel -> perl-ExtUtils-ParseXS
cycle: perl-CPAN -> perl-Test-Harness
  breaking dependency perl-Test-Harness -> perl-CPAN
cycle: nss-sysinit -> nss
  breaking dependency nss -> nss-sysinit
cycle: rpm-libs -> rpm
  breaking dependency rpm -> rpm-libs
done
[1/108] [2/108] installing cloog-0.15.9-2.2
[3/108] installing kernel-headers-2.6.36-1.1
[4/108] installing tizen-release-2.0.0-2.1
[5/108] installing tzdata-2011h-2.1
[6/108] installing libgcc-4.5.3-2.4
[7/108] installing setup-0.1-2.1
[8/108] installing filesystem-0.1-2.1
warning: group lock does not exist - using root
warning: group mail does not exist - using root
[9/108] installing eglibc-2.13-2.21
[10/108] installing bzip2-libs-1.0.5-6.1
[11/108] installing cpio-2.8-4.1
[12/108] installing e2fsprogs-libs-1.41.11-2.10
[13/108] installing elfutils-libelf-0.152-2.36
[14/108] installing findutils-4.2.31-2.1
[15/108] installing gdbm-1.8.3-5.1
[16/108] installing libattr-2.4.44-8.10
[17/108] installing libidn-1.15-6.1
[18/108] installing liblua-5.1.4-7.2
[19/108] installing libuuid-2.20.2-5.1
[20/108] installing lzo-2.03-2.2
[21/108] installing m4-1.4.14-2.1
[22/108] installing make-3.81-1.1
[23/108] installing net-tools-1.60-89.9
[24/108] installing nspr-4.8.7-1.13
[25/108] installing nss-softokn-freebl-3.12.9-4.19
[26/108] installing patch-2.6.1.169-1.1
[27/108] installing pkgconfig-0.25-3.2
[28/108] installing popt-1.16-4.1
[29/108] installing readline-5.2-13.2
[30/108] installing sed-4.1.5-2.2
[31/108] installing sqlite-3.7.13-1.2
[32/108] installing xz-libs-5.0.3-2.2
[33/108] installing zlib-1.2.5-3.24
[34/108] installing bash-4.1-4.1
[35/108] installing diffutils-3.0-3.2
[36/108] installing libgomp-4.5.3-2.4
[37/108] installing libstdc++-4.5.3-2.4
[38/108] installing eglibc-common-2.13-2.21
[39/108] installing ncurses-libs-5.7-6.1
[40/108] installing build-compare-2009.10.14-27.13
[41/108] installing libstdc++-devel-4.5.3-2.4
[42/108] installing c-ares-1.7.4-3.1
[43/108] installing eglibc-headers-2.13-2.21
[44/108] installing libacl-2.2.49-2.1
[45/108] installing libcap-2.21-2.1
[46/108] installing libfile-5.04-2.2
[47/108] installing libpython-2.7.1-4.19
[48/108] installing lzo-minilzo-2.03-2.2
[49/108] installing ncurses-5.7-6.1
[50/108] installing openssl-1.0.1c-2.34
[51/108] installing unzip-6.0-10.9
[52/108] installing zlib-devel-1.2.5-3.24
[53/108] installing bzip2-1.0.5-6.1
[54/108] installing gmp-5.0.1-2.1
[55/108] installing libblkid-2.20.2-5.1
[56/108] installing libpcre-7.9-2.2
[57/108] installing xz-5.0.3-2.2
[58/108] installing binutils-2.21.51.20110421-5.2
[59/108] installing elfutils-libs-0.152-2.36
[60/108] installing nss-3.12.9-4.19
[61/108] installing perl-5.12.1-64.7
[62/108] installing ncurses-base-5.7-6.1
[63/108] installing perl-HTML-Tagset-3.20-9.3
[64/108] installing perl-IO-Compress-Base-2.008-64.7
[65/108] installing perl-Module-Pluggable-3.60-64.7
[66/108] installing perl-Pod-Escapes-1.04-64.7
[67/108] installing perl-TimeDate-1.20-2.3
[68/108] installing eglibc-devel-2.13-2.21
[69/108] installing grep-2.5.1a-63.2
[70/108] installing mpfr-3.0.0-2.2
[71/108] installing perl-Compress-Raw-Zlib-2.008-64.7
[72/108] installing perl-libs-5.12.1-64.7
[73/108] installing tar-1.17-3.2
[74/108] installing coreutils-6.9-10.1
[75/108] installing file-5.04-2.2
[76/108] installing libmount-2.20.2-5.1
[77/108] installing lzo-devel-2.03-2.2
[78/108] installing perl-devel-5.12.1-64.7
[79/108] installing xz-lzma-compat-5.0.3-2.2
[80/108] installing nss-sysinit-3.12.9-4.19
[81/108] installing ppl-0.10.2-11.2
[82/108] installing python-base-2.7.1-4.19
[83/108] installing elfutils-0.152-2.36
[84/108] installing libcurl-7.21.3-7.3
[85/108] installing perl-ExtUtils-ParseXS-2.18-64.7
[86/108] installing perl-Pod-Simple-3.07-64.7
[87/108] installing perl-Test-Simple-0.80-64.7
[88/108] installing gawk-3.1.5-3.2
[89/108] installing gzip-1.3.14-2.2
[90/108] installing mpc-0.9-2.2
[91/108] installing perl-IO-Compress-Zlib-2.008-64.7
[92/108] installing perl-Test-Harness-3.12-64.7
[93/108] installing cloog-ppl-0.15.9-2.2
[94/108] installing build-2011.01.10a-2.1
[95/108] installing python-devel-2.7.1-4.19
[96/108] installing curl-7.21.3-7.3
[97/108] installing util-linux-2.20.2-5.1
warning: group tty does not exist - using root
/bin/chown: `root:root': invalid user
[98/108] installing perl-ExtUtils-MakeMaker-6.36-64.7
[99/108] installing cpp-4.5.3-2.4
[100/108] installing rpm-4.9.1-5.2
[101/108] installing perl-CPAN-1.9205-64.7
[102/108] installing autoconf-2.68-2.1
[103/108] installing rpm-libs-4.9.1-5.2
[104/108] installing gcc-4.5.3-2.4
[105/108] installing automake-1.11.1-4.1
[106/108] installing gcc-c++-4.5.3-2.4
[107/108] installing rpm-build-4.9.1-5.2
[108/108] installing libtool-2.2.6b-2.2
now finalizing build dir...
/var/run/obs/worker/5/build/build: line 1761: /srv/build/root_5/etc/passwd: No such file or directory
-----------------------------------------------------------------
I have the following modifications for xcb-proto.spec:
4c4
< Release: 1
---
> Release: 1.3
-----------------------------------------------------------------
----- building xcb-proto.spec (user abuild)
-----------------------------------------------------------------
-----------------------------------------------------------------
+ exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --define 'disturl obs://build.tizen.org/Tizen:2.0:IVI/standard/41038752d3d721c0b06b8dba0c0af9f4-xcb-proto' /home/abuild/rpmbuild/SOURCES/xcb-proto.spec
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.nRVsDE
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/abuild/rpmbuild/BUILD
+ rm -rf xcb-proto-1.7.1
+ /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-proto-1.7.1.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd xcb-proto-1.7.1
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GbOc56
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xcb-proto-1.7.1
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3  -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3  -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3  -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir'
+ export FFLAGS
+ LD_AS_NEEDED=1
+ export LD_AS_NEEDED
+ ./autogen.sh
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf
autoreconf: configure.ac: not using Autoheader
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:9: installing `./install-sh'
configure.ac:9: installing `./missing'
autoreconf: Leaving directory `.'
configure: WARNING: unrecognized options: --enable-maintainer-mode
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for xmllint... no
configure: WARNING: xmllint not found; unable to validate against schema.
checking for a Python interpreter with version >= 2.5... python
checking for python... /usr/bin/python
checking for python version... 2.7
checking for python platform... linux3
checking for python script directory... ${prefix}/lib/python2.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating xcbgen/Makefile
config.status: creating xcb-proto.pc
configure: WARNING: unrecognized options: --enable-maintainer-mode
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3  -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3  -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -m32 -march=core2 -mssse3  -mtune=atom -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir'
+ export FFLAGS
+ autoreconf -v --install --force
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
autoreconf: configure.ac: not using Autoheader
autoreconf: running: automake --add-missing --copy --force-missing
autoreconf: Leaving directory `.'
+ ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-shared
configure: WARNING: unrecognized options: --disable-shared
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for xmllint... no
configure: WARNING: xmllint not found; unable to validate against schema.
checking for a Python interpreter with version >= 2.5... python
checking for python... /usr/bin/python
checking for python version... 2.7
checking for python platform... linux3
checking for python script directory... ${prefix}/lib/python2.7/site-packages
checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating xcbgen/Makefile
config.status: creating xcb-proto.pc
configure: WARNING: unrecognized options: --disable-shared
+ make -j4
Making all in src
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
Making all in xcbgen
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.xDzUm3
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xcb-proto-1.7.1
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
+ /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 install
Making install in src
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/xcb"
 /usr/bin/install -c -m 644 xcb.xsd xproto.xml bigreq.xml composite.xml damage.xml dpms.xml dri2.xml ge.xml glx.xml randr.xml record.xml render.xml res.xml screensaver.xml shape.xml shm.xml sync.xml xc_misc.xml xevie.xml xf86dri.xml xf86vidmode.xml xfixes.xml xinerama.xml xinput.xml xkb.xml xprint.xml xselinux.xml xtest.xml xv.xml xvmc.xml '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/xcb'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src'
Making install in xcbgen
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/python2.7/site-packages/xcbgen" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/lib/python2.7/site-packages/xcbgen"
 /usr/bin/install -c -m 644 __init__.py error.py expr.py matcher.py state.py xtypes.py '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/lib/python2.7/site-packages/xcbgen'
Byte-compiling python modules...
__init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py
Byte-compiling python modules (optimized versions) ...
__init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen'
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/lib/pkgconfig"
 /usr/bin/install -c -m 644 xcb-proto.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/lib/pkgconfig'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1'
+ rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/info/dir
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 -regex '.*\.la$'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 -regex '.*\.a$'
+ xargs rm -f --
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/info
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/doc
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/doc/xcb-proto
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/gtk-doc
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/share/man
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 -regex '.*/man/man./.*.[0-9]'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 -regex '.*/man/../man./.*.[0-9]'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386 -regex '.*/man/man./.*.[0-9]pm'
+ xargs rm -f --
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm//brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-python-bytecompile
Bytecompiling .py files below /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386/usr/lib/python2.7/ using /usr/bin/python2.7
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
Processing files: xcb-proto-1.7.1-1.3.i586
Provides: pkgconfig(xcb-proto) = 1.7.1
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: /usr/bin/pkg-config python(abi) = 2.7
Processing files: xcb-proto-debuginfo-1.7.1-1.3.i586
Processing files: xcb-proto-debugsource-1.7.1-1.3.i586
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
Wrote: /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.3.src.rpm
Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-1.3.i586.rpm
Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-1.3.i586.rpm
Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-1.3.i586.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MNetaT
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xcb-proto-1.7.1
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.3.i386
+ exit 0
... checking for files with abuild user/group
... creating baselibs

w10 finished "build xcb-proto.spec" at Thu Mar 21 20:05:04 UTC 2013.