Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_2 Using BUILD_ARCH=armv7el w25 started "build fuse.spec" at Thu Sep 20 20:55:44 UTC 2012. Building fuse for project 'Tizen:Devel:Main' repository 'standard' arch 'armv7el' srcmd5 'a89e229e5a740f5269065c33dc9b9289' processing specfile /srv/build/root_2/.build-srcdir/fuse.spec ... running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/fuse.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/fuse.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/56] preinstalling nss... [2/56] preinstalling libfile-x86-arm... [3/56] preinstalling elfutils-libelf-x86-arm... [4/56] preinstalling nss-softokn-freebl-x86-arm... [5/56] preinstalling nss-x86-arm... [6/56] preinstalling nspr-x86-arm... [7/56] preinstalling libgcc-x86-arm... [8/56] preinstalling libacl-x86-arm... [9/56] preinstalling libattr-x86-arm... [10/56] preinstalling libcap-x86-arm... [11/56] preinstalling liblua-x86-arm... [12/56] preinstalling popt-x86-arm... [13/56] preinstalling xz-libs-x86-arm... [14/56] preinstalling zlib-x86-arm... [15/56] preinstalling file... [16/56] preinstalling sqlite-x86-arm... [17/56] preinstalling mpfr-x86-arm... [18/56] preinstalling gmp-x86-arm... [19/56] preinstalling mpc-x86-arm... [20/56] preinstalling bzip2-libs-x86-arm... [21/56] preinstalling rpm-x86-arm... [22/56] preinstalling rpm-libs-x86-arm... [23/56] preinstalling rpm-build-x86-arm... [24/56] preinstalling tizen-accelerator... [25/56] preinstalling eglibc-x86-arm... [26/56] preinstalling ncurses-libs-x86-arm... [27/56] preinstalling bash-x86-arm... [28/56] preinstalling rpm... [29/56] preinstalling rpm-libs... [30/56] preinstalling setup... [31/56] preinstalling filesystem... [32/56] preinstalling bash... [33/56] preinstalling bzip2... [34/56] preinstalling coreutils... [35/56] preinstalling diffutils... [36/56] preinstalling liblua... [37/56] preinstalling eglibc... [38/56] preinstalling eglibc-common... [39/56] preinstalling libacl... [40/56] preinstalling libattr... [41/56] preinstalling libgcc... [42/56] preinstalling libcap... [43/56] preinstalling popt... [44/56] preinstalling readline... [45/56] preinstalling sed... [46/56] preinstalling tar... [47/56] preinstalling zlib... [48/56] preinstalling sqlite... [49/56] preinstalling ncurses-libs... [50/56] preinstalling elfutils-libelf... [51/56] preinstalling bzip2-libs... [52/56] preinstalling libstdc++... [53/56] preinstalling libfile... [54/56] preinstalling xz-libs... [55/56] preinstalling nspr... [56/56] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running rpm-build-x86-arm postinstall script mv: cannot stat `/usr/bin/rpmbuild': No such file or directory mv: cannot stat `/usr/lib/rpm/debugedit': No such file or directory mv: cannot stat `/usr/lib/rpm/elfdeps': No such file or directory mv: cannot stat `/usr/lib/rpm/javadeps': No such file or directory mv: cannot stat `/usr/lib/rpm/rpmdeps': No such file or directory running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl-IO-Compress-Base -> perl breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: libcurl -> openssl -> perl-WWW-Curl breaking dependency openssl -> perl-WWW-Curl cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/137] [2/137] installing kernel-headers-2.6.36-slp.1.1 [3/137] installing tizen-release-1.0.0-slp.1.1 [4/137] installing tzdata-2011h-slp.1.1 [5/137] installing libgcc-4.5.3-slp.1.1 [6/137] installing setup-0.1-slp.1.1 [7/137] installing filesystem-0.1-slp.1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [8/137] installing eglibc-2.13-slp.1.4 [9/137] installing eglibc-common-2.13-slp.1.4 warning: %post(eglibc-common-2.13-slp.1.4.armv7l) scriptlet failed, exit status 255 [10/137] installing bash-4.1-slp.1.1 [11/137] installing bzip2-libs-1.0.5-slp.2.3 [12/137] installing cpio-2.11-slp.1.1 [13/137] installing diffutils-3.0-slp.1.1 [14/137] installing e2fsprogs-libs-1.41.9-slp.2.1 [15/137] installing elfutils-libelf-0.152-slp.1.4 [16/137] installing fdupes-1.40-slp.42.1 [17/137] installing findutils-4.2.31-slp.1.1 [18/137] installing gdbm-1.8.3-slp.1.1 [19/137] installing libattr-2.4.44-slp.7.2 [20/137] installing libgomp-4.5.3-slp.1.1 [21/137] installing libidn-1.15-slp.1.1 [22/137] installing liblua-5.1.4-slp.6.1 [23/137] installing libstdc++-4.5.3-slp.1.1 [24/137] installing libuuid-2.16.2-slp.1.1 [25/137] installing m4-1.4.14-slp.1.1 [26/137] installing net-tools-1.60-slp.87.1 [27/137] installing nspr-4.9-slp.1.4 [28/137] installing nss-softokn-freebl-3.12.9-slp.4.3 [29/137] installing patch-2.6-slp.1.1 [30/137] installing pkgconfig-0.25-slp.2.1 [31/137] installing popt-1.16-slp.1.1 [32/137] installing readline-5.2-slp.13.1 [33/137] installing sed-4.1.5-slp.1.1 [34/137] installing sqlite-3.7.9-slp.3.1 [35/137] installing tar-1.17-slp.1.1 [36/137] installing xz-libs-5.0.3-slp.1.1 [37/137] installing zlib-1.2.5-slp.2.2 [38/137] installing ncurses-libs-5.7-slp.4.1 [39/137] installing build-compare-2009.10.14-slp.26.1 [40/137] installing libstdc++-devel-4.5.3-slp.1.1 [41/137] installing eglibc-headers-2.13-slp.1.4 [42/137] installing libcap-2.21-slp.1.1 [43/137] installing unzip-6.0-slp.9.2 [44/137] installing c-ares-1.7.4-slp.1.1 [45/137] installing gmp-5.0.1-slp.1.1 [46/137] installing libacl-2.2.49-slp.1.1 [47/137] installing libfile-5.04-slp.1.1 [48/137] installing libpcre-7.6.4-slp.1.1 [49/137] installing make-3.82-slp.152.1 [50/137] installing ncurses-5.7-slp.4.1 [51/137] installing binutils-2.22-slp.1.1 [52/137] installing bzip2-1.0.5-slp.2.3 [53/137] installing libblkid-2.16.2-slp.1.1 [54/137] installing xz-5.0.3-slp.1.1 [55/137] installing elfutils-libs-0.152-slp.1.4 [56/137] installing nss-3.12.9-slp.4.3 [57/137] installing perl-5.12.1-slp.61.5 [58/137] installing ncurses-base-5.7-slp.4.1 [59/137] installing perl-IO-Compress-Base-2.008-slp.61.5 [60/137] installing perl-Module-Pluggable-3.60-slp.61.5 [61/137] installing perl-Pod-Escapes-1.04-slp.61.5 [62/137] installing perl-TimeDate-1.20-slp.1.1 [63/137] installing eglibc-devel-2.13-slp.1.4 [64/137] installing file-5.04-slp.1.1 [65/137] installing grep-2.5.1a-slp.61.1 [66/137] installing mpfr-3.0.0-slp.1.1 [67/137] installing perl-Compress-Raw-Zlib-2.008-slp.61.5 [68/137] installing perl-devel-5.12.1-slp.61.5 [69/137] installing perl-libs-5.12.1-slp.61.5 [70/137] installing coreutils-6.9-slp.9.3 [71/137] installing xz-lzma-compat-5.0.3-slp.1.1 [72/137] installing elfutils-0.152-slp.1.4 [73/137] installing nss-sysinit-3.12.9-slp.4.3 [74/137] installing util-linux-ng-2.16.2-slp.1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [75/137] installing perl-ExtUtils-ParseXS-2.18-slp.61.5 [76/137] installing perl-Pod-Simple-3.07-slp.61.5 [77/137] installing tizen-accelerator-1.0.1-slp.1.1 [78/137] installing perl-IO-Compress-Zlib-2.008-slp.61.5 [79/137] installing perl-Test-Harness-3.12-slp.61.5 [80/137] installing gawk-3.1.5-slp.1.1 [81/137] installing gzip-1.3.14-slp.1.1 [82/137] installing mpc-0.9-slp.1.1 [83/137] installing build-2011.01.10a-slp.1.1 [84/137] installing openssl-1.0.0f-slp.1.1 [85/137] installing bzip2-libs-x86-arm-1.0.5-slp.8.1 [86/137] installing eglibc-x86-arm-2.13-slp.8.1 [87/137] installing elfutils-libelf-x86-arm-0.152-slp.8.1 [88/137] installing elfutils-libs-x86-arm-0.152-slp.8.1 [89/137] installing gmp-x86-arm-5.0.1-slp.8.1 [90/137] installing libacl-x86-arm-2.2.49-slp.8.1 [91/137] installing libattr-x86-arm-2.4.44-slp.8.1 [92/137] installing libcap-x86-arm-2.21-slp.8.1 [93/137] installing libfile-x86-arm-5.04-slp.8.1 [94/137] installing libgcc-x86-arm-4.5.3-slp.8.1 [95/137] installing liblua-x86-arm-5.1.4-slp.8.1 [96/137] installing mpc-x86-arm-0.9-slp.8.1 [97/137] installing mpfr-x86-arm-3.0.0-slp.8.1 [98/137] installing ncurses-libs-x86-arm-5.7-slp.8.1 [99/137] installing nspr-x86-arm-4.9-slp.8.1 [100/137] installing nss-softokn-freebl-x86-arm-3.12.9-slp.8.1 [101/137] installing nss-x86-arm-3.12.9-slp.8.1 [102/137] installing perl-ExtUtils-MakeMaker-6.36-slp.61.5 [103/137] installing popt-x86-arm-1.16-slp.8.1 [104/137] installing sqlite-x86-arm-3.7.9-slp.8.1 [105/137] installing xz-libs-x86-arm-5.0.3-slp.8.1 [106/137] installing zlib-x86-arm-1.2.5-slp.8.1 [107/137] installing cpp-4.5.3-slp.1.1 [108/137] installing libcurl-7.21.3-slp.1.1 [109/137] installing curl-7.21.3-slp.1.1 [110/137] installing perl-CPAN-1.9205-slp.61.5 [111/137] installing bash-x86-arm-4.1-slp.8.1 [112/137] installing fdupes-x86-arm-1.40-slp.8.1 [113/137] installing findutils-x86-arm-4.2.31-slp.8.1 [114/137] installing gawk-x86-arm-3.1.5-slp.8.1 [115/137] installing gzip-x86-arm-1.3.14-slp.8.1 [116/137] installing make-x86-arm-3.82-slp.8.1 [117/137] installing sed-x86-arm-4.1.5-slp.8.1 [118/137] installing tar-x86-arm-1.17-slp.8.1 [119/137] installing diffutils-x86-arm-3.0-slp.8.1 [120/137] installing patch-x86-arm-2.6-slp.8.1 [121/137] installing perl-WWW-Curl-4.05-slp.4.1 [122/137] installing autoconf-2.68-slp.1.1 [123/137] installing coreutils-x86-arm-6.9-slp.8.1 [124/137] installing file-x86-arm-5.04-slp.8.1 [125/137] installing elfutils-x86-arm-0.152-slp.8.1 [126/137] installing gcc-4.5.3-slp.1.1 [127/137] installing automake-1.11.1-slp.3.1 [128/137] installing gcc-c++-4.5.3-slp.1.1 [129/137] installing rpm-4.9.1-slp.1.1 [130/137] installing libtool-2.2.6b-slp.1.1 [131/137] installing cross-armv7l-gcc-accel-armv7l-4.5.3-slp.1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [132/137] installing rpm-libs-4.9.1-slp.1.1 [133/137] installing rpm-libs-x86-arm-4.9.1-slp.8.1 [134/137] installing cross-armv7l-binutils-accel-armv7l-2.22-slp.1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [135/137] installing rpm-build-4.9.1-slp.1.1 [136/137] installing rpm-x86-arm-4.9.1-slp.8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [137/137] installing rpm-build-x86-arm-4.9.1-slp.8.1 now finalizing build dir... /var/run/obs/worker/2/build/build: line 1761: /srv/build/root_2/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for fuse.spec: 11c11 < Release: 10 --- > Release: slp.10.1 ----------------------------------------------------------------- ----- building fuse.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:Devel:Main/standard/a89e229e5a740f5269065c33dc9b9289-fuse' /home/abuild/rpmbuild/SOURCES/fuse.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pKX4UA + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf fuse-2.8.3 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/fuse-2.8.3.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd fuse-2.8.3 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.3s2BGf + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd fuse-2.8.3 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir' + export FFLAGS + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-kernel-module --bindir=/bin --exec-prefix=/ --disable-util --disable-example --enable-static configure: WARNING: unrecognized options: --disable-kernel-module checking build system type... armv7l-unknown-linux-gnueabi checking host system type... armv7l-unknown-linux-gnueabi checking target system type... armv7l-tizen-linux-gnueabi checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for armv7l-unknown-linux-gnueabi-gcc... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r checking for armv7l-unknown-linux-gnueabi-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for armv7l-unknown-linux-gnueabi-ar... no checking for ar... ar checking for armv7l-unknown-linux-gnueabi-strip... no checking for strip... strip checking for armv7l-unknown-linux-gnueabi-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for armv7l-unknown-linux-gnueabi-gcc... gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking whether gcc and cc understand -c and -o together... yes checking for fork... yes checking for setxattr... yes checking for fdatasync... yes checking for struct stat.st_atim... yes checking for struct stat.st_atimespec... no checking for library containing dlopen... -ldl checking for library containing clock_gettime... -lrt checking for ld used by GCC... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking for working iconv... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); configure: creating ./config.status config.status: creating fuse.pc config.status: creating Makefile config.status: creating lib/Makefile config.status: creating util/Makefile config.status: creating example/Makefile config.status: creating include/Makefile config.status: creating include/config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --disable-kernel-module + make -j4 Making all in include make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' make all-am make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' Making all in lib make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/lib' /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse.lo -MD -MP -MF .deps/fuse.Tpo -c -o fuse.lo fuse.c /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_kern_chan.lo -MD -MP -MF .deps/fuse_kern_chan.Tpo -c -o fuse_kern_chan.lo fuse_kern_chan.c /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_loop.lo -MD -MP -MF .deps/fuse_loop.Tpo -c -o fuse_loop.lo fuse_loop.c /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_loop_mt.lo -MD -MP -MF .deps/fuse_loop_mt.Tpo -c -o fuse_loop_mt.lo fuse_loop_mt.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_kern_chan.lo -MD -MP -MF .deps/fuse_kern_chan.Tpo -c fuse_kern_chan.c -fPIC -DPIC -o .libs/fuse_kern_chan.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse.lo -MD -MP -MF .deps/fuse.Tpo -c fuse.c -fPIC -DPIC -o .libs/fuse.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_loop_mt.lo -MD -MP -MF .deps/fuse_loop_mt.Tpo -c fuse_loop_mt.c -fPIC -DPIC -o .libs/fuse_loop_mt.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_loop.lo -MD -MP -MF .deps/fuse_loop.Tpo -c fuse_loop.c -fPIC -DPIC -o .libs/fuse_loop.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_loop.lo -MD -MP -MF .deps/fuse_loop.Tpo -c fuse_loop.c -o fuse_loop.o >/dev/null 2>&1 fuse.c: In function 'fuse_compat_open': fuse.c:968:18: warning: dereferencing type-punned pointer will break strict-aliasing rules fuse.c:974:4: warning: dereferencing type-punned pointer will break strict-aliasing rules fuse.c: In function 'fuse_compat_release': fuse.c:985:4: warning: dereferencing type-punned pointer will break strict-aliasing rules fuse.c: In function 'fuse_compat_opendir': fuse.c:998:4: warning: dereferencing type-punned pointer will break strict-aliasing rules fuse.c: In function 'fuse_compat_statfs': fuse.c:1038:4: warning: dereferencing type-punned pointer will break strict-aliasing rules fuse.c:1045:4: warning: dereferencing type-punned pointer will break strict-aliasing rules libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_kern_chan.lo -MD -MP -MF .deps/fuse_kern_chan.Tpo -c fuse_kern_chan.c -o fuse_kern_chan.o >/dev/null 2>&1 mv -f .deps/fuse_loop.Tpo .deps/fuse_loop.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_lowlevel.lo -MD -MP -MF .deps/fuse_lowlevel.Tpo -c -o fuse_lowlevel.lo fuse_lowlevel.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_lowlevel.lo -MD -MP -MF .deps/fuse_lowlevel.Tpo -c fuse_lowlevel.c -fPIC -DPIC -o .libs/fuse_lowlevel.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_loop_mt.lo -MD -MP -MF .deps/fuse_loop_mt.Tpo -c fuse_loop_mt.c -o fuse_loop_mt.o >/dev/null 2>&1 mv -f .deps/fuse_kern_chan.Tpo .deps/fuse_kern_chan.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_mt.lo -MD -MP -MF .deps/fuse_mt.Tpo -c -o fuse_mt.lo fuse_mt.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_mt.lo -MD -MP -MF .deps/fuse_mt.Tpo -c fuse_mt.c -fPIC -DPIC -o .libs/fuse_mt.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_mt.lo -MD -MP -MF .deps/fuse_mt.Tpo -c fuse_mt.c -o fuse_mt.o >/dev/null 2>&1 mv -f .deps/fuse_loop_mt.Tpo .deps/fuse_loop_mt.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_opt.lo -MD -MP -MF .deps/fuse_opt.Tpo -c -o fuse_opt.lo fuse_opt.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_opt.lo -MD -MP -MF .deps/fuse_opt.Tpo -c fuse_opt.c -fPIC -DPIC -o .libs/fuse_opt.o mv -f .deps/fuse_mt.Tpo .deps/fuse_mt.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_session.lo -MD -MP -MF .deps/fuse_session.Tpo -c -o fuse_session.lo fuse_session.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_session.lo -MD -MP -MF .deps/fuse_session.Tpo -c fuse_session.c -fPIC -DPIC -o .libs/fuse_session.o fuse_session.c: In function 'fuse_chan_recv': fuse_session.c:177:4: warning: dereferencing type-punned pointer will break strict-aliasing rules libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_session.lo -MD -MP -MF .deps/fuse_session.Tpo -c fuse_session.c -o fuse_session.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_opt.lo -MD -MP -MF .deps/fuse_opt.Tpo -c fuse_opt.c -o fuse_opt.o >/dev/null 2>&1 mv -f .deps/fuse_session.Tpo .deps/fuse_session.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_signals.lo -MD -MP -MF .deps/fuse_signals.Tpo -c -o fuse_signals.lo fuse_signals.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_signals.lo -MD -MP -MF .deps/fuse_signals.Tpo -c fuse_signals.c -fPIC -DPIC -o .libs/fuse_signals.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_signals.lo -MD -MP -MF .deps/fuse_signals.Tpo -c fuse_signals.c -o fuse_signals.o >/dev/null 2>&1 mv -f .deps/fuse_opt.Tpo .deps/fuse_opt.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT cuse_lowlevel.lo -MD -MP -MF .deps/cuse_lowlevel.Tpo -c -o cuse_lowlevel.lo cuse_lowlevel.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT cuse_lowlevel.lo -MD -MP -MF .deps/cuse_lowlevel.Tpo -c cuse_lowlevel.c -fPIC -DPIC -o .libs/cuse_lowlevel.o mv -f .deps/fuse_signals.Tpo .deps/fuse_signals.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT helper.lo -MD -MP -MF .deps/helper.Tpo -c -o helper.lo helper.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT helper.lo -MD -MP -MF .deps/helper.Tpo -c helper.c -fPIC -DPIC -o .libs/helper.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse_lowlevel.lo -MD -MP -MF .deps/fuse_lowlevel.Tpo -c fuse_lowlevel.c -o fuse_lowlevel.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT cuse_lowlevel.lo -MD -MP -MF .deps/cuse_lowlevel.Tpo -c cuse_lowlevel.c -o cuse_lowlevel.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT helper.lo -MD -MP -MF .deps/helper.Tpo -c helper.c -o helper.o >/dev/null 2>&1 mv -f .deps/cuse_lowlevel.Tpo .deps/cuse_lowlevel.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT subdir.lo -MD -MP -MF .deps/subdir.Tpo -c -o subdir.lo `test -f 'modules/subdir.c' || echo './'`modules/subdir.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT subdir.lo -MD -MP -MF .deps/subdir.Tpo -c modules/subdir.c -fPIC -DPIC -o .libs/subdir.o mv -f .deps/helper.Tpo .deps/helper.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT iconv.lo -MD -MP -MF .deps/iconv.Tpo -c -o iconv.lo `test -f 'modules/iconv.c' || echo './'`modules/iconv.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT iconv.lo -MD -MP -MF .deps/iconv.Tpo -c modules/iconv.c -fPIC -DPIC -o .libs/iconv.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT subdir.lo -MD -MP -MF .deps/subdir.Tpo -c modules/subdir.c -o subdir.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT iconv.lo -MD -MP -MF .deps/iconv.Tpo -c modules/iconv.c -o iconv.o >/dev/null 2>&1 mv -f .deps/fuse_lowlevel.Tpo .deps/fuse_lowlevel.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT mount.lo -MD -MP -MF .deps/mount.Tpo -c -o mount.lo mount.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT mount.lo -MD -MP -MF .deps/mount.Tpo -c mount.c -fPIC -DPIC -o .libs/mount.o mount.c: In function 'receive_fd': mount.c:265:2: warning: dereferencing type-punned pointer will break strict-aliasing rules mv -f .deps/subdir.Tpo .deps/subdir.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT mount_util.lo -MD -MP -MF .deps/mount_util.Tpo -c -o mount_util.lo mount_util.c mv -f .deps/iconv.Tpo .deps/iconv.Plo /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT ulockmgr.lo -MD -MP -MF .deps/ulockmgr.Tpo -c -o ulockmgr.lo ulockmgr.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT mount_util.lo -MD -MP -MF .deps/mount_util.Tpo -c mount_util.c -fPIC -DPIC -o .libs/mount_util.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT ulockmgr.lo -MD -MP -MF .deps/ulockmgr.Tpo -c ulockmgr.c -fPIC -DPIC -o .libs/ulockmgr.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT mount.lo -MD -MP -MF .deps/mount.Tpo -c mount.c -o mount.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT fuse.lo -MD -MP -MF .deps/fuse.Tpo -c fuse.c -o fuse.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT mount_util.lo -MD -MP -MF .deps/mount_util.Tpo -c mount_util.c -o mount_util.o >/dev/null 2>&1 libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../include -I../include -DFUSERMOUNT_DIR=\"/bin\" -D_FILE_OFFSET_BITS=64 -D_REENTRANT -DFUSE_USE_VERSION=26 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT ulockmgr.lo -MD -MP -MF .deps/ulockmgr.Tpo -c ulockmgr.c -o ulockmgr.o >/dev/null 2>&1 mv -f .deps/mount.Tpo .deps/mount.Plo mv -f .deps/mount_util.Tpo .deps/mount_util.Plo mv -f .deps/ulockmgr.Tpo .deps/ulockmgr.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -pthread -version-number 1:0:1 -o libulockmgr.la -rpath /usr/lib ulockmgr.lo libtool: link: gcc -shared .libs/ulockmgr.o -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -pthread -pthread -Wl,-soname -Wl,libulockmgr.so.1 -o .libs/libulockmgr.so.1.0.1 libtool: link: (cd ".libs" && rm -f "libulockmgr.so.1" && ln -s "libulockmgr.so.1.0.1" "libulockmgr.so.1") libtool: link: (cd ".libs" && rm -f "libulockmgr.so" && ln -s "libulockmgr.so.1.0.1" "libulockmgr.so") libtool: link: ar cru .libs/libulockmgr.a ulockmgr.o libtool: link: ranlib .libs/libulockmgr.a libtool: link: ( cd ".libs" && rm -f "libulockmgr.la" && ln -s "../libulockmgr.la" "libulockmgr.la" ) mv -f .deps/fuse.Tpo .deps/fuse.Plo /bin/sh ../libtool --tag=CC --mode=link gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -pthread -lrt -ldl -version-number 2:8:3 -Wl,--version-script,./fuse_versionscript -o libfuse.la -rpath /usr/lib fuse.lo fuse_kern_chan.lo fuse_loop.lo fuse_loop_mt.lo fuse_lowlevel.lo fuse_mt.lo fuse_opt.lo fuse_session.lo fuse_signals.lo cuse_lowlevel.lo helper.lo subdir.lo iconv.lo mount.lo mount_util.lo libtool: link: gcc -shared .libs/fuse.o .libs/fuse_kern_chan.o .libs/fuse_loop.o .libs/fuse_loop_mt.o .libs/fuse_lowlevel.o .libs/fuse_mt.o .libs/fuse_opt.o .libs/fuse_session.o .libs/fuse_signals.o .libs/cuse_lowlevel.o .libs/helper.o .libs/subdir.o .libs/iconv.o .libs/mount.o .libs/mount_util.o -lrt -ldl -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -pthread -Wl,--version-script -Wl,./fuse_versionscript -pthread -Wl,-soname -Wl,libfuse.so.2 -o .libs/libfuse.so.2.8.3 libtool: link: (cd ".libs" && rm -f "libfuse.so.2" && ln -s "libfuse.so.2.8.3" "libfuse.so.2") libtool: link: (cd ".libs" && rm -f "libfuse.so" && ln -s "libfuse.so.2.8.3" "libfuse.so") libtool: link: ar cru .libs/libfuse.a fuse.o fuse_kern_chan.o fuse_loop.o fuse_loop_mt.o fuse_lowlevel.o fuse_mt.o fuse_opt.o fuse_session.o fuse_signals.o cuse_lowlevel.o helper.o subdir.o iconv.o mount.o mount_util.o libtool: link: ranlib .libs/libfuse.a libtool: link: ( cd ".libs" && rm -f "libfuse.la" && ln -s "../libfuse.la" "libfuse.la" ) make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/lib' make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3' make[1]: Nothing to be done for `all-am'. make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.BqQLVp + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd fuse-2.8.3 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm + /usr/bin/make prefix=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr exec_prefix=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr bindir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/bin sbindir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/sbin sysconfdir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/etc datadir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/share includedir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include libdir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib libexecdir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/libexec localstatedir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/var sharedstatedir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/var/lib mandir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/share/man infodir=/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/share/info install Making install in include make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' make[2]: Nothing to be done for `install-exec-am'. test -z "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include/fuse" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include/fuse" /usr/bin/install -c -m 644 fuse.h fuse_compat.h fuse_common.h fuse_common_compat.h fuse_lowlevel.h fuse_lowlevel_compat.h fuse_opt.h cuse_lowlevel.h '/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include/fuse' test -z "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include" /usr/bin/install -c -m 644 old/fuse.h ulockmgr.h '/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/include' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/include' Making install in lib make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/lib' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/lib' test -z "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib" /bin/sh ../libtool --mode=install /usr/bin/install -c libfuse.la libulockmgr.la '/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib' libtool: install: /usr/bin/install -c .libs/libfuse.so.2.8.3 /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libfuse.so.2.8.3 libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib && { ln -s -f libfuse.so.2.8.3 libfuse.so.2 || { rm -f libfuse.so.2 && ln -s libfuse.so.2.8.3 libfuse.so.2; }; }) libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib && { ln -s -f libfuse.so.2.8.3 libfuse.so || { rm -f libfuse.so && ln -s libfuse.so.2.8.3 libfuse.so; }; }) libtool: install: /usr/bin/install -c .libs/libfuse.lai /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libfuse.la libtool: install: /usr/bin/install -c .libs/libulockmgr.so.1.0.1 /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libulockmgr.so.1.0.1 libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib && { ln -s -f libulockmgr.so.1.0.1 libulockmgr.so.1 || { rm -f libulockmgr.so.1 && ln -s libulockmgr.so.1.0.1 libulockmgr.so.1; }; }) libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib && { ln -s -f libulockmgr.so.1.0.1 libulockmgr.so || { rm -f libulockmgr.so && ln -s libulockmgr.so.1.0.1 libulockmgr.so; }; }) libtool: install: /usr/bin/install -c .libs/libulockmgr.lai /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libulockmgr.la libtool: install: /usr/bin/install -c .libs/libfuse.a /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libfuse.a libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libfuse.a libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libfuse.a libtool: install: /usr/bin/install -c .libs/libulockmgr.a /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libulockmgr.a libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libulockmgr.a libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libulockmgr.a libtool: install: warning: remember to run `libtool --finish /usr/lib' make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/lib' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3/lib' make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3' make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3' make[2]: Nothing to be done for `install-exec-am'. test -z "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/pkgconfig" /usr/bin/install -c -m 644 fuse.pc '/home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/pkgconfig' make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/fuse-2.8.3' + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/fuse-2.8.3 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libfuse.so.2.8.3 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm/usr/lib/libulockmgr.so.1.0.1 symlinked /usr/lib/debug/usr/lib/libulockmgr.so.1.0.1.debug to /usr/lib/debug/usr/lib/libulockmgr.so.1.debug symlinked /usr/lib/debug/usr/lib/libulockmgr.so.1.0.1.debug to /usr/lib/debug/usr/lib/libulockmgr.so.debug symlinked /usr/lib/debug/usr/lib/libfuse.so.2.8.3.debug to /usr/lib/debug/usr/lib/libfuse.so.2.debug symlinked /usr/lib/debug/usr/lib/libfuse.so.2.8.3.debug to /usr/lib/debug/usr/lib/libfuse.so.debug 716 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm Processing files: libfuse-2.8.3-slp.10.1.armv7l Provides: libfuse.so.2 libfuse.so.2(FUSE_2.2) libfuse.so.2(FUSE_2.4) libfuse.so.2(FUSE_2.5) libfuse.so.2(FUSE_2.6) libfuse.so.2(FUSE_2.7) libfuse.so.2(FUSE_2.7.5) libfuse.so.2(FUSE_2.8) libulockmgr.so.1 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdl.so.2 libdl.so.2(GLIBC_2.4) libfuse.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 librt.so.1(GLIBC_2.4) libulockmgr.so.1 Processing files: libfuse-devel-2.8.3-slp.10.1.armv7l Provides: libtool(/usr/lib/libfuse.la) libtool(/usr/lib/libulockmgr.la) pkgconfig(fuse) = 2.8.3 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config Processing files: fuse-debuginfo-2.8.3-slp.10.1.armv7l Processing files: fuse-debugsource-2.8.3-slp.10.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/fuse-2.8.3-slp.10.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfuse-2.8.3-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfuse-devel-2.8.3-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-debuginfo-2.8.3-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/fuse-debugsource-2.8.3-slp.10.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.LHWUrU + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd fuse-2.8.3 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/fuse-2.8.3-slp.10.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w25 finished "build fuse.spec" at Thu Sep 20 20:56:22 UTC 2012. Retried build at Fri Sep 21 08:19:39 2012 returned same result, skipped Retried build at Fri Sep 21 08:22:47 2012 returned same result, skipped Retried build at Fri Sep 21 08:25:29 2012 returned same result, skipped Retried build at Fri Sep 21 09:44:11 2012 returned same result, skipped Retried build at Fri Sep 21 10:52:08 2012 returned same result, skipped