Memory limit set to 110504152KB
Using BUILD_ROOT=/srv/build/root_4
Using BUILD_ARCH=armv7el


w21 started "build ise-engine-default.spec" at Fri Sep 21 12:38:30 UTC 2012.

Building ise-engine-default for project 'Tizen:Devel:Main' repository 'standard' arch 'armv7el' srcmd5 '064c4c693c7b2e38e6bbaa01f3f443ae'

processing specfile /srv/build/root_4/.build-srcdir/ise-engine-default.spec ...
running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/ise-engine-default.spec
init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/ise-engine-default.spec build rpmlint-Factory ...
copying qemu
 /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh

Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason
[1/56] preinstalling nss...
[2/56] preinstalling libfile-x86-arm...
[3/56] preinstalling elfutils-libelf-x86-arm...
[4/56] preinstalling nss-softokn-freebl-x86-arm...
[5/56] preinstalling nss-x86-arm...
[6/56] preinstalling nspr-x86-arm...
[7/56] preinstalling libgcc-x86-arm...
[8/56] preinstalling libacl-x86-arm...
[9/56] preinstalling libattr-x86-arm...
[10/56] preinstalling libcap-x86-arm...
[11/56] preinstalling liblua-x86-arm...
[12/56] preinstalling popt-x86-arm...
[13/56] preinstalling xz-libs-x86-arm...
[14/56] preinstalling zlib-x86-arm...
[15/56] preinstalling file...
[16/56] preinstalling sqlite-x86-arm...
[17/56] preinstalling mpfr-x86-arm...
[18/56] preinstalling gmp-x86-arm...
[19/56] preinstalling mpc-x86-arm...
[20/56] preinstalling bzip2-libs-x86-arm...
[21/56] preinstalling rpm-x86-arm...
[22/56] preinstalling rpm-libs-x86-arm...
[23/56] preinstalling rpm-build-x86-arm...
[24/56] preinstalling tizen-accelerator...
[25/56] preinstalling eglibc-x86-arm...
[26/56] preinstalling ncurses-libs-x86-arm...
[27/56] preinstalling bash-x86-arm...
[28/56] preinstalling rpm...
[29/56] preinstalling rpm-libs...
[30/56] preinstalling setup...
[31/56] preinstalling filesystem...
[32/56] preinstalling bash...
[33/56] preinstalling bzip2...
[34/56] preinstalling coreutils...
[35/56] preinstalling diffutils...
[36/56] preinstalling liblua...
[37/56] preinstalling eglibc...
[38/56] preinstalling eglibc-common...
[39/56] preinstalling libacl...
[40/56] preinstalling libattr...
[41/56] preinstalling libgcc...
[42/56] preinstalling libcap...
[43/56] preinstalling popt...
[44/56] preinstalling readline...
[45/56] preinstalling sed...
[46/56] preinstalling tar...
[47/56] preinstalling zlib...
[48/56] preinstalling sqlite...
[49/56] preinstalling ncurses-libs...
[50/56] preinstalling elfutils-libelf...
[51/56] preinstalling bzip2-libs...
[52/56] preinstalling libstdc++...
[53/56] preinstalling libfile...
[54/56] preinstalling xz-libs...
[55/56] preinstalling nspr...
[56/56] preinstalling nss-softokn-freebl...
running rpm-x86-arm postinstall script
running rpm-libs-x86-arm postinstall script
running rpm-build-x86-arm postinstall script
mv: cannot stat `/usr/bin/rpmbuild': No such file or directory
mv: cannot stat `/usr/lib/rpm/debugedit': No such file or directory
mv: cannot stat `/usr/lib/rpm/elfdeps': No such file or directory
mv: cannot stat `/usr/lib/rpm/javadeps': No such file or directory
mv: cannot stat `/usr/lib/rpm/rpmdeps': No such file or directory
running tizen-accelerator postinstall script
running bash-x86-arm postinstall script
initializing rpm db...
reordering...cycle: bash -> eglibc -> eglibc-common
  breaking dependency eglibc-common -> bash
cycle: eglibc -> eglibc-common
  breaking dependency eglibc-common -> eglibc
cycle: eglibc -> eglibc-common -> libgcc
  breaking dependency eglibc -> eglibc-common
cycle: eglibc -> libgcc
  breaking dependency libgcc -> eglibc
cycle: filesystem -> setup
  breaking dependency setup -> filesystem
cycle: ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses
cycle: ncurses-base -> ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses-base
cycle: perl -> perl-libs
  breaking dependency perl -> perl-libs
cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel
  breaking dependency perl -> perl-ExtUtils-MakeMaker
cycle: perl -> perl-IO-Compress-Zlib
  breaking dependency perl -> perl-IO-Compress-Zlib
cycle: perl-IO-Compress-Base -> perl
  breaking dependency perl -> perl-IO-Compress-Base
cycle: perl -> perl-Module-Pluggable
  breaking dependency perl -> perl-Module-Pluggable
cycle: perl -> perl-Pod-Simple
  breaking dependency perl -> perl-Pod-Simple
cycle: dbus-libs -> dbus
  breaking dependency dbus -> dbus-libs
cycle: libcurl -> openssl -> perl-WWW-Curl
  breaking dependency openssl -> perl-WWW-Curl
cycle: perl-devel -> perl-ExtUtils-MakeMaker
  breaking dependency perl-devel -> perl-ExtUtils-MakeMaker
cycle: perl-ExtUtils-ParseXS -> perl-devel
  breaking dependency perl-devel -> perl-ExtUtils-ParseXS
cycle: nss -> nss-sysinit
  breaking dependency nss -> nss-sysinit
cycle: perl-CPAN -> perl-Test-Harness
  breaking dependency perl-Test-Harness -> perl-CPAN
cycle: rpm-libs -> rpm
  breaking dependency rpm -> rpm-libs
done
[1/237] [2/237] installing kernel-headers-2.6.36-slp.1.1
[3/237] installing libX11-common-1.5.0-slp.2.1
[4/237] installing opengl-es-virtual-drv-0.1.3-slp.10.1
[5/237] installing tizen-release-1.0.0-slp.1.1
[6/237] installing tzdata-2011h-slp.1.1
[7/237] installing libgcc-4.5.3-slp.1.1
[8/237] installing setup-0.1-slp.1.1
[9/237] installing filesystem-0.1-slp.1.1
warning: group lock does not exist - using root
warning: group mail does not exist - using root
[10/237] installing eglibc-2.13-slp.1.4
[11/237] installing eglibc-common-2.13-slp.1.4
warning: %post(eglibc-common-2.13-slp.1.4.armv7l) scriptlet failed, exit status 255
[12/237] installing bash-4.1-slp.1.1
[13/237] installing bzip2-libs-1.0.5-slp.2.3
[14/237] installing cpio-2.11-slp.1.1
[15/237] installing diffutils-3.0-slp.1.1
[16/237] installing e2fsprogs-libs-1.41.9-slp.2.1
[17/237] installing eina-1.6.0+svn.74624slp2+build02-slp.1.1
[18/237] installing elfutils-libelf-0.152-slp.1.4
[19/237] installing expat-2.0.1-slp.8.1
[20/237] installing fdupes-1.40-slp.42.1
[21/237] installing findutils-4.2.31-slp.1.1
[22/237] installing freetype-2.4.9-slp.1.1
[23/237] installing fribidi-0.19.5-slp.5.1
[24/237] installing gdbm-1.8.3-slp.1.1
[25/237] installing libICE-1.0.8-slp.1.1
[26/237] installing libXau-1.0.7-slp.1.1
[27/237] installing libasound-1.0.24.1-slp.1.1
[28/237] installing libattr-2.4.44-slp.7.2
[29/237] installing libdrm2-2.4.35-slp.1.1
[30/237] installing libexif-0.6.19-slp.1.1
[31/237] installing libffi-3.0.9-slp.100.1
[32/237] installing libgomp-4.5.3-slp.1.1
[33/237] installing libidn-1.15-slp.1.1
[34/237] installing libjpeg-8.3-slp.16.1
[35/237] installing liblua-5.1.4-slp.6.1
[36/237] installing libogg-1.2.1-slp.2.1
[37/237] installing libslp-pm-1.2.4-slp.2.1
[38/237] installing libstdc++-4.5.3-slp.1.1
[39/237] installing libuuid-2.16.2-slp.1.1
[40/237] installing m4-1.4.14-slp.1.1
[41/237] installing net-tools-1.60-slp.87.1
[42/237] installing nspr-4.9-slp.1.4
[43/237] installing nss-softokn-freebl-3.12.9-slp.4.3
[44/237] installing patch-2.6-slp.1.1
[45/237] installing pixman-0.26.0-slp.4.1
[46/237] installing pkgconfig-0.25-slp.2.1
[47/237] installing popt-1.16-slp.1.1
[48/237] installing readline-5.2-slp.13.1
[49/237] installing sed-4.1.5-slp.1.1
[50/237] installing smack-1.0slp2+s5-slp.1.1
[51/237] installing sqlite-3.7.9-slp.3.1
[52/237] installing tar-1.17-slp.1.1
[53/237] installing xz-libs-5.0.3-slp.1.1
[54/237] installing zlib-1.2.5-slp.2.2
[55/237] installing ncurses-libs-5.7-slp.4.1
[56/237] installing build-compare-2009.10.14-slp.26.1
[57/237] installing libstdc++-devel-4.5.3-slp.1.1
[58/237] installing eglibc-headers-2.13-slp.1.4
[59/237] installing libcap-2.21-slp.1.1
[60/237] installing unzip-6.0-slp.9.2
[61/237] installing c-ares-1.7.4-slp.1.1
[62/237] installing embryo-1.6.0+svn.73906slp2+build04-slp.1.1
[63/237] installing gmp-5.0.1-slp.1.1
[64/237] installing harfbuzz-0.9.0-slp.1.1
[65/237] installing libacl-2.2.49-slp.1.1
[66/237] installing libdlog-0.4.0-slp.5.1
[67/237] installing libdrm-slp1-2.4.35-slp.1.1
[68/237] installing libfile-5.04-slp.1.1
[69/237] installing libpcre-7.6.4-slp.1.1
[70/237] installing libpng-1.2.46-slp.1.1
[71/237] installing libtheora-1.1.1-slp.2.1
[72/237] installing libvorbis-1.3.2-slp.2.1
[73/237] installing libxcb-1.8.1-slp.1.1
[74/237] installing libxml2-2.7.8-slp.8.1
[75/237] installing make-3.82-slp.152.1
[76/237] installing ncurses-5.7-slp.4.1
[77/237] installing binutils-2.22-slp.1.1
[78/237] installing bzip2-1.0.5-slp.2.3
[79/237] installing glib2-2.32.3-slp.1.1
[80/237] installing libSM-1.2.1-slp.1.1
[81/237] installing libblkid-2.16.2-slp.1.1
[82/237] installing libicu-4.8-slp.2.1
[83/237] installing libprivilege-control-0.0.6-slp.1.1
[84/237] installing xz-5.0.3-slp.1.1
[85/237] installing eet-1.6.0+svn.74530slp2+build01-slp.1.1
[86/237] installing elfutils-libs-0.152-slp.1.4
[87/237] installing nss-3.12.9-slp.4.3
[88/237] installing perl-5.12.1-slp.61.5
[89/237] installing ncurses-base-5.7-slp.4.1
[90/237] installing perl-IO-Compress-Base-2.008-slp.61.5
[91/237] installing perl-Module-Pluggable-3.60-slp.61.5
[92/237] installing perl-Pod-Escapes-1.04-slp.61.5
[93/237] installing perl-TimeDate-1.20-slp.1.1
[94/237] installing eglibc-devel-2.13-slp.1.4
[95/237] installing file-5.04-slp.1.1
[96/237] installing grep-2.5.1a-slp.61.1
[97/237] installing mpfr-3.0.0-slp.1.1
[98/237] installing perl-Compress-Raw-Zlib-2.008-slp.61.5
[99/237] installing perl-devel-5.12.1-slp.61.5
[100/237] installing perl-libs-5.12.1-slp.61.5
[101/237] installing bundle-0.1.22-slp.1.2
[102/237] installing coreutils-6.9-slp.9.3
[103/237] installing ecore-1.6.0+svn.74576slp2+build05-slp.1.2
[104/237] installing gstreamer-0.10.36-slp.2.2
[105/237] installing libX11-1.5.0-slp.2.1
[106/237] installing libsf-common-0.3.8-slp.1.1
[107/237] installing xz-lzma-compat-5.0.3-slp.1.1
[108/237] installing app-checker-0.0.8-slp.2.2
[109/237] installing elfutils-0.152-slp.1.4
[110/237] installing heynoti-0.0.2-slp.35.2
[111/237] installing nss-sysinit-3.12.9-slp.4.3
[112/237] installing vconf-0.2.27-slp.1.2
[113/237] installing libslp-db-util-0.1.1-slp.1.2
[114/237] installing libsoup2.4-2.38.1-slp.1.1
[115/237] installing util-linux-ng-2.16.2-slp.1.1
warning: group tty does not exist - using root
/bin/chown: `root:root': invalid user
[116/237] installing perl-ExtUtils-ParseXS-2.18-slp.61.5
[117/237] installing perl-Pod-Simple-3.07-slp.61.5
[118/237] installing tizen-accelerator-1.0.1-slp.1.1
[119/237] installing libXcomposite-0.4.3-slp.3.1
[120/237] installing libXext-1.3.1-slp.1.1
[121/237] installing libXfixes-5.0-slp.2.1
[122/237] installing libXrender-0.9.7-slp.1.1
[123/237] installing perl-IO-Compress-Zlib-2.008-slp.61.5
[124/237] installing perl-Test-Harness-3.12-slp.61.5
[125/237] installing capi-system-runtime-info-0.0.1-slp.9.2
[126/237] installing gawk-3.1.5-slp.1.1
[127/237] installing gzip-1.3.14-slp.1.1
[128/237] installing mpc-0.9-slp.1.1
[129/237] installing xdgmime-0.0.12-slp.1.1
chown: `root:root': invalid user
[130/237] installing app-checker-server-0.0.8-slp.2.2
[131/237] installing build-2011.01.10a-slp.1.1
[132/237] installing ecore-imf-1.6.0+svn.74576slp2+build05-slp.1.2
[133/237] installing ecore-input-1.6.0+svn.74576slp2+build05-slp.1.2
[134/237] installing giflib-4.1.6-slp.9.1
[135/237] installing librua-0.1.0-slp.33.1
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.rua.db': No such file or directory
chown: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory
chmod: cannot access `/opt/dbspace/.rua.db': No such file or directory
chmod: cannot access `/opt/dbspace/.rua.db-journal': No such file or directory
warning: %post(librua-0.1.0-slp.33.1.armv7l) scriptlet failed, exit status 1
[136/237] installing sysman-0.2.25-slp.1.1
[137/237] installing dbus-1.4.8-slp.4.1
[138/237] installing openssl-1.0.0f-slp.1.1
[139/237] installing sensor-0.5.10-slp.1.2
[140/237] installing fontconfig-2.9.0-slp.2.1
[141/237] installing bzip2-libs-x86-arm-1.0.5-slp.8.1
[142/237] installing eglibc-x86-arm-2.13-slp.8.1
[143/237] installing elfutils-libelf-x86-arm-0.152-slp.8.1
[144/237] installing elfutils-libs-x86-arm-0.152-slp.8.1
[145/237] installing gmp-x86-arm-5.0.1-slp.8.1
[146/237] installing libacl-x86-arm-2.2.49-slp.8.1
[147/237] installing libattr-x86-arm-2.4.44-slp.8.1
[148/237] installing libcap-x86-arm-2.21-slp.8.1
[149/237] installing libfile-x86-arm-5.04-slp.8.1
[150/237] installing libgcc-x86-arm-4.5.3-slp.8.1
[151/237] installing liblua-x86-arm-5.1.4-slp.8.1
[152/237] installing mpc-x86-arm-0.9-slp.8.1
[153/237] installing mpfr-x86-arm-3.0.0-slp.8.1
[154/237] installing ncurses-libs-x86-arm-5.7-slp.8.1
[155/237] installing nspr-x86-arm-4.9-slp.8.1
[156/237] installing nss-softokn-freebl-x86-arm-3.12.9-slp.8.1
[157/237] installing nss-x86-arm-3.12.9-slp.8.1
[158/237] installing perl-ExtUtils-MakeMaker-6.36-slp.61.5
[159/237] installing popt-x86-arm-1.16-slp.8.1
[160/237] installing sqlite-x86-arm-3.7.9-slp.8.1
[161/237] installing xz-libs-x86-arm-5.0.3-slp.8.1
[162/237] installing zlib-x86-arm-1.2.5-slp.8.1
[163/237] installing dbus-libs-1.4.8-slp.4.1
[164/237] installing libXdamage-1.1.3-slp.3.1
[165/237] installing libXgesture-0.1.0-slp.2.1
[166/237] installing libXi-1.6.1-slp.1.1
[167/237] installing libXinerama-1.1.2-slp.1.1
[168/237] installing libXv-1.0.7-slp.1.1
[169/237] installing libdri2-0.1.0-slp.9.1
[170/237] installing libXcursor-1.1.13-slp.1.1
[171/237] installing libXrandr-1.4.0-slp.3.1
[172/237] installing cpp-4.5.3-slp.1.1
[173/237] installing ecore-fb-1.6.0+svn.74576slp2+build05-slp.1.2
[174/237] installing libcurl-7.21.3-slp.1.1
[175/237] installing security-server-0.0.36-slp.1.1
[176/237] installing ail-0.2.44-slp.1.2
[AIL_INITDB][D][main,214] AIL_INITDB : 0
Not matched env. variable, TIZEN_DEBUG_LEVELopen log dev is failed
[AIL_INITDB][E][initdb_load_directory,122] Failed to access the [/opt/share/applications] because No such file or directory

[AIL_INITDB][E][main,224] cannot load opt desktop directory.
[177/237] installing cairo-1.12.2-slp.8.2
[178/237] installing evas-1.6.0+svn.74704slp2+build15-slp.1.1
[179/237] installing curl-7.21.3-slp.1.1
[180/237] installing perl-CPAN-1.9205-slp.61.5
[181/237] installing bash-x86-arm-4.1-slp.8.1
[182/237] installing dbus-glib-0.100-slp.2.2
[183/237] installing fdupes-x86-arm-1.40-slp.8.1
[184/237] installing findutils-x86-arm-4.2.31-slp.8.1
[185/237] installing gawk-x86-arm-3.1.5-slp.8.1
[186/237] installing gzip-x86-arm-1.3.14-slp.8.1
[187/237] installing make-x86-arm-3.82-slp.8.1
[188/237] installing sed-x86-arm-4.1.5-slp.8.1
[189/237] installing tar-x86-arm-1.17-slp.8.1
[190/237] installing diffutils-x86-arm-3.0-slp.8.1
[191/237] installing libXtst-1.2.0-slp.3.1
[192/237] installing libsecurity-server-client-0.0.36-slp.1.1
[193/237] installing patch-x86-arm-2.6-slp.8.1
[194/237] installing perl-WWW-Curl-4.05-slp.4.1
[195/237] installing autoconf-2.68-slp.1.1
[196/237] installing coreutils-x86-arm-6.9-slp.8.1
[197/237] installing ecore-con-1.6.0+svn.74576slp2+build05-slp.1.2
[198/237] installing file-x86-arm-5.04-slp.8.1
[199/237] installing ecore-imf-evas-1.6.0+svn.74576slp2+build05-slp.1.2
[200/237] installing ecore-input-evas-1.6.0+svn.74576slp2+build05-slp.1.2
[201/237] installing libslp-utilx-0.1.7-slp.1.1
[202/237] installing pango-1.26.1-slp.1.2

(pango-querymodules:3185): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
[203/237] installing elfutils-x86-arm-0.152-slp.8.1
[204/237] installing gcc-4.5.3-slp.1.1
[205/237] installing automake-1.11.1-slp.3.1
[206/237] installing ecore-file-1.6.0+svn.74576slp2+build05-slp.1.2
[207/237] installing ecore-ipc-1.6.0+svn.74576slp2+build05-slp.1.2
[208/237] installing gcc-c++-4.5.3-slp.1.1
[209/237] installing rpm-4.9.1-slp.1.1
[210/237] installing gst-plugins-base-0.10.36-slp.7.2
[211/237] installing ecore-x-1.6.0+svn.74576slp2+build05-slp.1.2
[212/237] installing libtool-2.2.6b-slp.1.1
[213/237] installing efreet-1.6.0+svn.74618slp2+build02-slp.1.1
[214/237] installing cross-armv7l-gcc-accel-armv7l-4.5.3-slp.1.1
"GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 "
GCC and GCC-accel versions match. Enabling cross-compiler.
cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory
cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory
[215/237] installing rpm-libs-4.9.1-slp.1.1
[216/237] installing aul-0.0.186-slp.1.2
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.mida.db': No such file or directory
chown: cannot access `/opt/dbspace/.mida.db-journal': No such file or directory
chmod: cannot access `/opt/dbspace/.mida.db': No such file or directory
chmod: cannot access `/opt/dbspace/.mida.db-journal': No such file or directory
warning: %post(aul-0.0.186-slp.1.2.armv7l) scriptlet failed, exit status 1
[217/237] installing ecore-evas-1.6.0+svn.74576slp2+build05-slp.1.2
[218/237] installing rpm-libs-x86-arm-4.9.1-slp.8.1
[219/237] installing cross-armv7l-binutils-accel-armv7l-2.22-slp.1.1
mv: cannot stat `/usr/bin/gprov': No such file or directory
[220/237] installing edbus-1.6.0+svn.74597slp2+build02-slp.1.1
[221/237] installing app-svc-0.1.27-slp.1.1
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.appsvc.db': No such file or directory
chown: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory
chmod: cannot access `/opt/dbspace/.appsvc.db': No such file or directory
chmod: cannot access `/opt/dbspace/.appsvc.db-journal': No such file or directory
warning: %post(app-svc-0.1.27-slp.1.1.armv7l) scriptlet failed, exit status 1
[222/237] installing edje-1.6.0+svn.74702slp2+build07-slp.1.1
[223/237] installing app-core-common-1.2-slp.28.1
[224/237] installing rpm-build-4.9.1-slp.1.1
[225/237] installing ethumb-1.6.0+svn.73539slp2+build01-slp.1.1
[226/237] installing emotion-1.6.0+svn.74311slp2+build01-slp.1.2
[227/237] installing notification-0.1.1-slp.1.1
sqlite3: Error: cannot locate your home directory
chown: cannot access `/opt/dbspace/.notification.db': No such file or directory
chown: cannot access `/opt/dbspace/.notification.db-journal': No such file or directory
chmod: cannot access `/opt/dbspace/.notification.db': No such file or directory
chmod: cannot access `/opt/dbspace/.notification.db-journal': No such file or directory
warning: %post(notification-0.1.1-slp.1.1.armv7l) scriptlet failed, exit status 1
[228/237] installing alarm-server-0.4.53-slp.2.1
Not matched env. variable, TIZEN_DEBUG_LEVELopen log dev is failed
[229/237] installing rpm-x86-arm-4.9.1-slp.8.1
/bin/rpm.orig-arm already present - skipping.
/usr/bin/rpm2cpio.orig-arm already present - skipping.
/usr/bin/rpmdb.orig-arm already present - skipping.
/usr/bin/rpmquery.orig-arm already present - skipping.
/usr/bin/rpmsign.orig-arm already present - skipping.
/usr/bin/rpmverify.orig-arm already present - skipping.
[230/237] installing rpm-build-x86-arm-4.9.1-slp.8.1
[231/237] installing libalarm-0.4.53-slp.2.1
[232/237] installing elementary-1.0.0+svn.70492slp2+build25-slp.1.1
[233/237] installing app-core-efl-1.2-slp.28.1
[234/237] installing capi-appfw-application-0.1.0-slp.28.1
[235/237] installing ui-gadget-1-0.1.0-slp.11.1
[236/237] installing isf-2.3.5617-slp.1.1
Not matched env. variable, TIZEN_DEBUG_LEVELopen log dev is failed
Not matched env. variable, TIZEN_DEBUG_LEVELopen log dev is failed
[237/237] installing isf-devel-2.3.5617-slp.1.1
now finalizing build dir...
/var/run/obs/worker/4/build/build: line 1761: /srv/build/root_4/etc/passwd: No such file or directory
Odd number of elements in hash assignment at /var/run/obs/worker/4/build/Build/Rpm.pm line 131, <SPEC> line 31.
Use of uninitialized value in concatenation (.) or string at /var/run/obs/worker/4/build/Build/Rpm.pm line 365, <SPEC> line 31.
build target is armv7l-tizen-linux
-----------------------------------------------------------------
I have the following modifications for ise-engine-default.spec:
5c5
< Release:    1
---
> Release:    slp.1.1
-----------------------------------------------------------------
----- building ise-engine-default.spec (user abuild)
-----------------------------------------------------------------
-----------------------------------------------------------------
+ exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:Devel:Main/standard/064c4c693c7b2e38e6bbaa01f3f443ae-ise-engine-default' /home/abuild/rpmbuild/SOURCES/ise-engine-default.spec
Building target platforms: armv7l-tizen-linux
Building for target armv7l-tizen-linux
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.XecRcy
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/abuild/rpmbuild/BUILD
+ rm -rf ise-engine-default-0.1.5023
+ /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-default-0.1.5023.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd ise-engine-default-0.1.5023
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.eVLzYB
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd ise-engine-default-0.1.5023
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir'
+ export FFLAGS
+ LD_AS_NEEDED=1
+ export LD_AS_NEEDED
+ ./bootstrap
+ aclocal -I ./m4
+ autoheader
+ libtoolize -c --automake
libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl'
+ automake --add-missing --copy --include-deps
configure.ac:31: installing `./config.guess'
configure.ac:31: installing `./config.sub'
configure.ac:21: installing `./install-sh'
Makefile.am: installing `./INSTALL'
Makefile.am: installing `./COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses.
+ autoconf
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir'
+ export FFLAGS
+ ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
./configure: line 3156: PLATFORM_INIT: command not found
checking build system type... armv7l-unknown-linux-gnueabi
checking host system type... armv7l-unknown-linux-gnueabi
checking for style of include used by make... GNU
checking for armv7l-unknown-linux-gnueabi-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld
checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r
checking for armv7l-unknown-linux-gnueabi-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for armv7l-unknown-linux-gnueabi-ar... no
checking for ar... ar
checking for armv7l-unknown-linux-gnueabi-strip... no
checking for strip... strip
checking for armv7l-unknown-linux-gnueabi-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking which extension is used for runtime loadable modules... .so
checking which variable specifies run-time module search path... LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib /emul/ia32-linux/usr/i586-tizen-linux/lib /emul/ia32-linux/usr/local/lib /emul/ia32-linux/lib /emul/ia32-linux/usr/lib 
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for ltdl.h... no
checking where to find libltdl headers... -I${top_srcdir}/libltdl
checking where to find libltdl library... ${top_build_prefix}libltdl/libltdlc.la
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking for armv7l-unknown-linux-gnueabi-g++... no
checking for armv7l-unknown-linux-gnueabi-c++... no
checking for armv7l-unknown-linux-gnueabi-gpp... no
checking for armv7l-unknown-linux-gnueabi-aCC... no
checking for armv7l-unknown-linux-gnueabi-CC... no
checking for armv7l-unknown-linux-gnueabi-cxx... no
checking for armv7l-unknown-linux-gnueabi-cc++... no
checking for armv7l-unknown-linux-gnueabi-cl.exe... no
checking for armv7l-unknown-linux-gnueabi-FCC... no
checking for armv7l-unknown-linux-gnueabi-KCC... no
checking for armv7l-unknown-linux-gnueabi-RCC... no
checking for armv7l-unknown-linux-gnueabi-xlC_r... no
checking for armv7l-unknown-linux-gnueabi-xlC... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld
checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes
checking whether the g++ linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... no
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for armv7l-unknown-linux-gnueabi-gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for armv7l-unknown-linux-gnueabi-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for ISF... yes
checking for ISF_GTKUTILS... no
checking for ANSI C header files... (cached) yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating m4/Makefile
config.status: creating src/Makefile
config.status: creating data/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
=== configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/libltdl)
configure: WARNING: no configuration information is in libltdl
+ make -j4
make  all-recursive
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
Making all in m4
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4'
Making all in src
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src'
/bin/sh ../libtool  --tag=CXX   --mode=compile g++ -DHAVE_CONFIG_H -I. -I..    -I/usr/include/scim-1.0   -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\"  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c -o ise_engine_default_la-isf_default_imengine.lo `test -f 'isf_default_imengine.cpp' || echo './'`isf_default_imengine.cpp
libtool: compile:  g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c isf_default_imengine.cpp  -fPIC -DPIC -o .libs/ise_engine_default_la-isf_default_imengine.o
isf_default_imengine.cpp: In member function 'void DefaultFactory::reload_config(const scim::ConfigPointer&)':
isf_default_imengine.cpp:167:91: warning: 'hw_detected' may be used uninitialized in this function
kdb_resource.h: At global scope:
kdb_resource.h:102:46: warning: 'gplangname' defined but not used
mv -f .deps/ise_engine_default_la-isf_default_imengine.Tpo .deps/ise_engine_default_la-isf_default_imengine.Plo
/bin/sh ../libtool --tag=CXX   --mode=link g++ -I/usr/include/scim-1.0   -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\"  -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0    -o ise-engine-default.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine ise_engine_default_la-isf_default_imengine.lo  -ldl 
libtool: link: /usr/bin/nm -B  .libs/ise_engine_default_la-isf_default_imengine.o   | sed -n -e 's/^.*[	 ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[	 ][	 ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed 's/.* //' | sort | uniq > .libs/ise-engine-default.exp
libtool: link: /bin/grep -E -e "^[^_].*" ".libs/ise-engine-default.exp" > ".libs/ise-engine-default.expT"
libtool: link: mv -f ".libs/ise-engine-default.expT" ".libs/ise-engine-default.exp"
libtool: link: g++ -shared -nostdlib //usr/lib/crti.o /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.5.3/crtbeginS.o  .libs/ise_engine_default_la-isf_default_imengine.o   -lscim-1.0 -ldl -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.5.3 -L//lib -L//usr/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.5.3/crtendS.o //usr/lib/crtn.o  -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp   -Wl,-soname -Wl,ise-engine-default.so -Wl,-retain-symbols-file -Wl,.libs/ise-engine-default.exp -o .libs/ise-engine-default.so
libtool: link: ( cd ".libs" && rm -f "ise-engine-default.la" && ln -s "../ise-engine-default.la" "ise-engine-default.la" )
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src'
Making all in data
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.1laqQ5
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd ise-engine-default-0.1.5023
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm
+ /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm install
Making install in m4
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/m4'
Making install in src
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/scim-1.0/1.4.0/IMEngine" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine"
 /bin/sh ../libtool   --mode=install /usr/bin/install -c   ise-engine-default.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine'
libtool: install: /usr/bin/install -c .libs/ise-engine-default.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.so
libtool: install: /usr/bin/install -c .libs/ise-engine-default.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.la
libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/src'
Making install in data
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/scim/icons" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/share/scim/icons"
 /usr/bin/install -c -m 644 isf-default.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/share/scim/icons'
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023/data'
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023'
+ rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/share/info/dir
+ find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm -regex '.*\.la$'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm -regex '.*\.a$'
+ xargs rm -f --
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5023
extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.so
54 blocks
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm//brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-python-bytecompile
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm
Processing files: ise-engine-default-0.1.5023-slp.1.1.armv7l
Provides: ise-engine-default.so
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libscim-1.0.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9)
Processing files: ise-engine-default-debuginfo-0.1.5023-slp.1.1.armv7l
Processing files: ise-engine-default-debugsource-0.1.5023-slp.1.1.armv7l
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm
Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-default-0.1.5023-slp.1.1.src.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-0.1.5023-slp.1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debuginfo-0.1.5023-slp.1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debugsource-0.1.5023-slp.1.1.armv7l.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.wgck4F
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd ise-engine-default-0.1.5023
+ /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5023-slp.1.1.arm
+ exit 0
... checking for files with abuild user/group
... creating baselibs

w21 finished "build ise-engine-default.spec" at Fri Sep 21 12:39:47 UTC 2012.


Retried build at Fri Sep 21 10:34:27 2012 returned same result, skipped
Retried build at Fri Sep 21 11:50:03 2012 returned same result, skipped