Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_7 Using BUILD_ARCH=armv7el w18 started "build libwbxml2.spec" at Thu Sep 20 20:55:56 UTC 2012. Building libwbxml2 for project 'Tizen:Devel:Main' repository 'standard' arch 'armv7el' srcmd5 'a319202cbf45937ddb1e6b356c0bc548' processing specfile /srv/build/root_7/.build-srcdir/libwbxml2.spec ... running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/libwbxml2.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/libwbxml2.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/56] preinstalling nss... [2/56] preinstalling libfile-x86-arm... [3/56] preinstalling elfutils-libelf-x86-arm... [4/56] preinstalling nss-softokn-freebl-x86-arm... [5/56] preinstalling nss-x86-arm... [6/56] preinstalling nspr-x86-arm... [7/56] preinstalling libgcc-x86-arm... [8/56] preinstalling libacl-x86-arm... [9/56] preinstalling libattr-x86-arm... [10/56] preinstalling libcap-x86-arm... [11/56] preinstalling liblua-x86-arm... [12/56] preinstalling popt-x86-arm... [13/56] preinstalling xz-libs-x86-arm... [14/56] preinstalling zlib-x86-arm... [15/56] preinstalling file... [16/56] preinstalling sqlite-x86-arm... [17/56] preinstalling mpfr-x86-arm... [18/56] preinstalling gmp-x86-arm... [19/56] preinstalling mpc-x86-arm... [20/56] preinstalling bzip2-libs-x86-arm... [21/56] preinstalling rpm-x86-arm... [22/56] preinstalling rpm-libs-x86-arm... [23/56] preinstalling rpm-build-x86-arm... [24/56] preinstalling tizen-accelerator... [25/56] preinstalling eglibc-x86-arm... [26/56] preinstalling ncurses-libs-x86-arm... [27/56] preinstalling bash-x86-arm... [28/56] preinstalling rpm... [29/56] preinstalling rpm-libs... [30/56] preinstalling setup... [31/56] preinstalling filesystem... [32/56] preinstalling bash... [33/56] preinstalling bzip2... [34/56] preinstalling coreutils... [35/56] preinstalling diffutils... [36/56] preinstalling liblua... [37/56] preinstalling eglibc... [38/56] preinstalling eglibc-common... [39/56] preinstalling libacl... [40/56] preinstalling libattr... [41/56] preinstalling libgcc... [42/56] preinstalling libcap... [43/56] preinstalling popt... [44/56] preinstalling readline... [45/56] preinstalling sed... [46/56] preinstalling tar... [47/56] preinstalling zlib... [48/56] preinstalling sqlite... [49/56] preinstalling ncurses-libs... [50/56] preinstalling elfutils-libelf... [51/56] preinstalling bzip2-libs... [52/56] preinstalling libstdc++... [53/56] preinstalling libfile... [54/56] preinstalling xz-libs... [55/56] preinstalling nspr... [56/56] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running rpm-build-x86-arm postinstall script mv: cannot stat `/usr/bin/rpmbuild': No such file or directory mv: cannot stat `/usr/lib/rpm/debugedit': No such file or directory mv: cannot stat `/usr/lib/rpm/elfdeps': No such file or directory mv: cannot stat `/usr/lib/rpm/javadeps': No such file or directory mv: cannot stat `/usr/lib/rpm/rpmdeps': No such file or directory running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl-IO-Compress-Base -> perl breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: libcurl -> openssl -> perl-WWW-Curl breaking dependency openssl -> perl-WWW-Curl cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/148] [2/148] installing kernel-headers-2.6.36-slp.1.1 [3/148] installing tizen-release-1.0.0-slp.1.1 [4/148] installing tzdata-2011h-slp.1.1 [5/148] installing libgcc-4.5.3-slp.1.1 [6/148] installing setup-0.1-slp.1.1 [7/148] installing filesystem-0.1-slp.1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [8/148] installing eglibc-2.13-slp.1.4 [9/148] installing eglibc-common-2.13-slp.1.4 warning: %post(eglibc-common-2.13-slp.1.4.armv7l) scriptlet failed, exit status 255 [10/148] installing bash-4.1-slp.1.1 [11/148] installing bzip2-libs-1.0.5-slp.2.3 [12/148] installing cpio-2.11-slp.1.1 [13/148] installing diffutils-3.0-slp.1.1 [14/148] installing e2fsprogs-libs-1.41.9-slp.2.1 [15/148] installing elfutils-libelf-0.152-slp.1.4 [16/148] installing expat-2.0.1-slp.8.1 [17/148] installing fdupes-1.40-slp.42.1 [18/148] installing findutils-4.2.31-slp.1.1 [19/148] installing gdbm-1.8.3-slp.1.1 [20/148] installing libattr-2.4.44-slp.7.2 [21/148] installing libgomp-4.5.3-slp.1.1 [22/148] installing libidn-1.15-slp.1.1 [23/148] installing liblua-5.1.4-slp.6.1 [24/148] installing libstdc++-4.5.3-slp.1.1 [25/148] installing libuuid-2.16.2-slp.1.1 [26/148] installing m4-1.4.14-slp.1.1 [27/148] installing net-tools-1.60-slp.87.1 [28/148] installing nspr-4.9-slp.1.4 [29/148] installing nss-softokn-freebl-3.12.9-slp.4.3 [30/148] installing patch-2.6-slp.1.1 [31/148] installing pkgconfig-0.25-slp.2.1 [32/148] installing popt-1.16-slp.1.1 [33/148] installing readline-5.2-slp.13.1 [34/148] installing sed-4.1.5-slp.1.1 [35/148] installing sqlite-3.7.9-slp.3.1 [36/148] installing tar-1.17-slp.1.1 [37/148] installing xz-libs-5.0.3-slp.1.1 [38/148] installing zlib-1.2.5-slp.2.2 [39/148] installing ncurses-libs-5.7-slp.4.1 [40/148] installing build-compare-2009.10.14-slp.26.1 [41/148] installing expat-devel-2.0.1-slp.8.1 [42/148] installing libstdc++-devel-4.5.3-slp.1.1 [43/148] installing eglibc-headers-2.13-slp.1.4 [44/148] installing libcap-2.21-slp.1.1 [45/148] installing popt-devel-1.16-slp.1.1 [46/148] installing unzip-6.0-slp.9.2 [47/148] installing zlib-devel-1.2.5-slp.2.2 [48/148] installing c-ares-1.7.4-slp.1.1 [49/148] installing gmp-5.0.1-slp.1.1 [50/148] installing libacl-2.2.49-slp.1.1 [51/148] installing libfile-5.04-slp.1.1 [52/148] installing libpcre-7.6.4-slp.1.1 [53/148] installing libpython-2.7.1-slp.4.2 [54/148] installing libxml2-2.7.8-slp.8.1 [55/148] installing make-3.82-slp.152.1 [56/148] installing ncurses-5.7-slp.4.1 [57/148] installing binutils-2.22-slp.1.1 [58/148] installing bzip2-1.0.5-slp.2.3 [59/148] installing libblkid-2.16.2-slp.1.1 [60/148] installing xz-5.0.3-slp.1.1 [61/148] installing elfutils-libs-0.152-slp.1.4 [62/148] installing nss-3.12.9-slp.4.3 [63/148] installing perl-5.12.1-slp.61.5 [64/148] installing ncurses-base-5.7-slp.4.1 [65/148] installing perl-IO-Compress-Base-2.008-slp.61.5 [66/148] installing perl-Module-Pluggable-3.60-slp.61.5 [67/148] installing perl-Pod-Escapes-1.04-slp.61.5 [68/148] installing perl-TimeDate-1.20-slp.1.1 [69/148] installing eglibc-devel-2.13-slp.1.4 [70/148] installing file-5.04-slp.1.1 [71/148] installing grep-2.5.1a-slp.61.1 [72/148] installing mpfr-3.0.0-slp.1.1 [73/148] installing perl-Compress-Raw-Zlib-2.008-slp.61.5 [74/148] installing perl-devel-5.12.1-slp.61.5 [75/148] installing perl-libs-5.12.1-slp.61.5 [76/148] installing coreutils-6.9-slp.9.3 [77/148] installing xz-lzma-compat-5.0.3-slp.1.1 [78/148] installing elfutils-0.152-slp.1.4 [79/148] installing nss-sysinit-3.12.9-slp.4.3 [80/148] installing python-base-2.7.1-slp.4.2 [81/148] installing util-linux-ng-2.16.2-slp.1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [82/148] installing perl-ExtUtils-ParseXS-2.18-slp.61.5 [83/148] installing perl-Pod-Simple-3.07-slp.61.5 [84/148] installing tizen-accelerator-1.0.1-slp.1.1 [85/148] installing perl-IO-Compress-Zlib-2.008-slp.61.5 [86/148] installing perl-Test-Harness-3.12-slp.61.5 [87/148] installing gawk-3.1.5-slp.1.1 [88/148] installing gzip-1.3.14-slp.1.1 [89/148] installing mpc-0.9-slp.1.1 [90/148] installing build-2011.01.10a-slp.1.1 [91/148] installing python-devel-2.7.1-slp.4.2 [92/148] installing openssl-1.0.0f-slp.1.1 [93/148] installing bzip2-libs-x86-arm-1.0.5-slp.8.1 [94/148] installing eglibc-x86-arm-2.13-slp.8.1 [95/148] installing elfutils-libelf-x86-arm-0.152-slp.8.1 [96/148] installing elfutils-libs-x86-arm-0.152-slp.8.1 [97/148] installing gmp-x86-arm-5.0.1-slp.8.1 [98/148] installing libacl-x86-arm-2.2.49-slp.8.1 [99/148] installing libattr-x86-arm-2.4.44-slp.8.1 [100/148] installing libcap-x86-arm-2.21-slp.8.1 [101/148] installing libfile-x86-arm-5.04-slp.8.1 [102/148] installing libgcc-x86-arm-4.5.3-slp.8.1 [103/148] installing liblua-x86-arm-5.1.4-slp.8.1 [104/148] installing mpc-x86-arm-0.9-slp.8.1 [105/148] installing mpfr-x86-arm-3.0.0-slp.8.1 [106/148] installing ncurses-libs-x86-arm-5.7-slp.8.1 [107/148] installing nspr-x86-arm-4.9-slp.8.1 [108/148] installing nss-softokn-freebl-x86-arm-3.12.9-slp.8.1 [109/148] installing nss-x86-arm-3.12.9-slp.8.1 [110/148] installing perl-ExtUtils-MakeMaker-6.36-slp.61.5 [111/148] installing popt-x86-arm-1.16-slp.8.1 [112/148] installing sqlite-x86-arm-3.7.9-slp.8.1 [113/148] installing xz-libs-x86-arm-5.0.3-slp.8.1 [114/148] installing zlib-x86-arm-1.2.5-slp.8.1 [115/148] installing libxml2-devel-2.7.8-slp.8.1 [116/148] installing cpp-4.5.3-slp.1.1 [117/148] installing libcurl-7.21.3-slp.1.1 [118/148] installing libarchive-2.8.3-slp.1.1 [119/148] installing curl-7.21.3-slp.1.1 [120/148] installing perl-CPAN-1.9205-slp.61.5 [121/148] installing bash-x86-arm-4.1-slp.8.1 [122/148] installing fdupes-x86-arm-1.40-slp.8.1 [123/148] installing findutils-x86-arm-4.2.31-slp.8.1 [124/148] installing gawk-x86-arm-3.1.5-slp.8.1 [125/148] installing gzip-x86-arm-1.3.14-slp.8.1 [126/148] installing make-x86-arm-3.82-slp.8.1 [127/148] installing sed-x86-arm-4.1.5-slp.8.1 [128/148] installing tar-x86-arm-1.17-slp.8.1 [129/148] installing diffutils-x86-arm-3.0-slp.8.1 [130/148] installing patch-x86-arm-2.6-slp.8.1 [131/148] installing perl-WWW-Curl-4.05-slp.4.1 [132/148] installing autoconf-2.68-slp.1.1 [133/148] installing coreutils-x86-arm-6.9-slp.8.1 [134/148] installing file-x86-arm-5.04-slp.8.1 [135/148] installing cmake-2.8.5-slp.1.1 [136/148] installing elfutils-x86-arm-0.152-slp.8.1 [137/148] installing gcc-4.5.3-slp.1.1 [138/148] installing automake-1.11.1-slp.3.1 [139/148] installing gcc-c++-4.5.3-slp.1.1 [140/148] installing rpm-4.9.1-slp.1.1 [141/148] installing libtool-2.2.6b-slp.1.1 [142/148] installing cross-armv7l-gcc-accel-armv7l-4.5.3-slp.1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [143/148] installing rpm-libs-4.9.1-slp.1.1 [144/148] installing rpm-libs-x86-arm-4.9.1-slp.8.1 [145/148] installing cross-armv7l-binutils-accel-armv7l-2.22-slp.1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [146/148] installing rpm-build-4.9.1-slp.1.1 [147/148] installing rpm-x86-arm-4.9.1-slp.8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [148/148] installing rpm-build-x86-arm-4.9.1-slp.8.1 now finalizing build dir... /var/run/obs/worker/7/build/build: line 1761: /srv/build/root_7/etc/passwd: No such file or directory Odd number of elements in hash assignment at /var/run/obs/worker/7/build/Build/Rpm.pm line 131, line 62. Use of uninitialized value in concatenation (.) or string at /var/run/obs/worker/7/build/Build/Rpm.pm line 365, line 62. Odd number of elements in hash assignment at /var/run/obs/worker/7/build/Build/Rpm.pm line 131, line 68. Use of uninitialized value in concatenation (.) or string at /var/run/obs/worker/7/build/Build/Rpm.pm line 365, line 68. Odd number of elements in hash assignment at /var/run/obs/worker/7/build/Build/Rpm.pm line 131, line 75. Use of uninitialized value in concatenation (.) or string at /var/run/obs/worker/7/build/Build/Rpm.pm line 365, line 75. build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for libwbxml2.spec: 4c4 < Release: 10 --- > Release: slp.10.1 ----------------------------------------------------------------- ----- building libwbxml2.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:Devel:Main/standard/a319202cbf45937ddb1e6b356c0bc548-libwbxml2' /home/abuild/rpmbuild/SOURCES/libwbxml2.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.dVqkI8 + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf libwbxml2-0.11.0 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libwbxml2-0.11.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd libwbxml2-0.11.0 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + mkdir build + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.YqLMYa + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd libwbxml2-0.11.0 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + cd build + cmake -DCMAKE_INSTALL_PREFIX=/usr .. -- The C compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Looking for include files HAVE_LIMITS_H -- Looking for include files HAVE_LIMITS_H - found -- Looking for include files HAVE_CTYPE_H -- Looking for include files HAVE_CTYPE_H - found -- Looking for include files HAVE_STDLIB_H -- Looking for include files HAVE_STDLIB_H - found -- Looking for include files HAVE_STDIO_H -- Looking for include files HAVE_STDIO_H - found -- Looking for include files HAVE_STDARG_H -- Looking for include files HAVE_STDARG_H - found -- Looking for include files HAVE_ASSERT_H -- Looking for include files HAVE_ASSERT_H - found -- Found Expat: /usr/lib/libexpat.so -- checking for one of the modules 'check' -- Performing Test ICONV_SECOND_ARGUMENT_IS_CONST -- Performing Test ICONV_SECOND_ARGUMENT_IS_CONST - Success -- Found Iconv: /usr/lib/libc.so -- Looking for unistd.h -- Looking for unistd.h - found -- Looking for getopt -- Looking for getopt - found -- ================================================== -- verbose mode OFF -- POSIX getopt ON -- unit tests OFF -- perl binary (test generated XML) ON -- diff binary (test generated XML) ON -- enable string tables ON -- enable WML support ON -- enable WTA support ON -- enable SI support ON -- enable SL support ON -- enable CO support ON -- enable PROV support ON -- enable EMN support ON -- enable DRMREL support ON -- enable OTA_SETTINGS support ON -- enable SYNCML support ON -- enable WV support ON -- enable AIRSYNC support ON -- enable Nokia ConML support ON -- build dynamic documentation OFF -- enable iconv support ON -- install documentation ON -- Configuring done -- Generating done -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0/build + make -j4 Scanning dependencies of target wbxml2 [ 23%] [ 23%] [ 23%] [ 23%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_conv.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_base64.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_buffers.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_charset.o /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0/src/wbxml_buffers.c: In function 'wbxml_buffer_no_spaces': /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0/src/wbxml_buffers.c:374:28: warning: unused variable 'end' /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0/src/wbxml_buffers.c:374:21: warning: unused variable 'j' [ 29%] [ 35%] [ 41%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_elt.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_encoder.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_errors.o [ 47%] [ 52%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_lists.o [ 58%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_log.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_mem.o [ 64%] [ 70%] [ 76%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_parser.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_tables.o Building C object src/CMakeFiles/wbxml2.dir/wbxml_tree.o [ 82%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_tree_clb_wbxml.o [ 88%] Building C object src/CMakeFiles/wbxml2.dir/wbxml_tree_clb_xml.o /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0/src/wbxml_tree_clb_xml.c: In function 'wbxml_tree_clb_xml_start_element': /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0/src/wbxml_tree_clb_xml.c:149:32: warning: pointer targets in assignment differ in signedness Linking C shared library libwbxml2.so [ 88%] Built target wbxml2 Scanning dependencies of target xml2wbxml Scanning dependencies of target wbxml2xml [ 94%] [100%] Building C object tools/CMakeFiles/xml2wbxml.dir/xml2wbxml_tool.o Building C object tools/CMakeFiles/wbxml2xml.dir/wbxml2xml_tool.o Linking C executable xml2wbxml Linking C executable wbxml2xml [100%] Built target xml2wbxml [100%] Built target wbxml2xml + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lChuyy + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd libwbxml2-0.11.0 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm + cd build + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm install [ 88%] Built target wbxml2 [ 94%] Built target wbxml2xml [100%] Built target xml2wbxml Install the project... -- Install configuration: "" -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/AUTHORS -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/BUGS -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/ChangeLog -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/COPYING -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/GNU-LGPL -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/INSTALL -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/NEWS -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/README -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/References -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/THANKS -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/doc/libwbxml/TODO -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/lib/pkgconfig/libwbxml2.pc -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/lib/libwbxml2.so.1.0.3 -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/lib/libwbxml2.so.1 -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/lib/libwbxml2.so -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_conv.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_defines.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_errors.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_base64.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_buffers.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_charset.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_elt.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_encoder.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_handlers.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_lists.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_log.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_mem.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_parser.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_tables.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_tree.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_tree_clb_wbxml.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/wbxml/wbxml_tree_clb_xml.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/include/libwbxml-1.0/../wbxml_config.h -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/bin/wbxml2xml -- Removed runtime path from "/home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/bin/wbxml2xml" -- Installing: /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/bin/xml2wbxml -- Removed runtime path from "/home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/bin/xml2wbxml" + rm -f /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/share/info/dir + find /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm -regex '.*\.la$' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm -regex '.*\.a$' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libwbxml2-0.11.0 extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/bin/wbxml2xml extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/bin/xml2wbxml extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm/usr/lib/libwbxml2.so.1.0.3 symlinked /usr/lib/debug/usr/lib/libwbxml2.so.1.0.3.debug to /usr/lib/debug/usr/lib/libwbxml2.so.1.debug symlinked /usr/lib/debug/usr/lib/libwbxml2.so.1.0.3.debug to /usr/lib/debug/usr/lib/libwbxml2.so.debug 1442 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm Processing files: libwbxml2-0.11.0-slp.10.1.armv7l Provides: libwbxml2.so.1 Requires(interp): /sbin/ldconfig /sbin/ldconfig Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libexpat.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libwbxml2.so.1 Processing files: libwbxml2-devel-0.11.0-slp.10.1.armv7l Provides: pkgconfig(libwbxml2) = 0.11.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libwbxml2.so.1 pkgconfig(libxml-2.0) >= 2.6 Processing files: libwbxml2-utils-0.11.0-slp.10.1.armv7l Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libwbxml2.so.1 Processing files: libwbxml2-debuginfo-0.11.0-slp.10.1.armv7l Processing files: libwbxml2-debugsource-0.11.0-slp.10.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/libwbxml2-0.11.0-slp.10.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libwbxml2-0.11.0-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libwbxml2-devel-0.11.0-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libwbxml2-utils-0.11.0-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libwbxml2-debuginfo-0.11.0-slp.10.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libwbxml2-debugsource-0.11.0-slp.10.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.abCO5Z + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd libwbxml2-0.11.0 + rm -rf /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm + cd build + rm -rf /home/abuild/rpmbuild/BUILDROOT/libwbxml2-0.11.0-slp.10.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w18 finished "build libwbxml2.spec" at Thu Sep 20 20:56:33 UTC 2012. Retried build at Fri Sep 21 08:19:19 2012 returned same result, skipped Retried build at Fri Sep 21 08:22:35 2012 returned same result, skipped Retried build at Fri Sep 21 08:25:18 2012 returned same result, skipped Retried build at Fri Sep 21 08:29:14 2012 returned same result, skipped Retried build at Fri Sep 21 08:30:51 2012 returned same result, skipped Retried build at Fri Sep 21 08:32:05 2012 returned same result, skipped Retried build at Fri Sep 21 08:40:51 2012 returned same result, skipped Retried build at Fri Sep 21 09:44:16 2012 returned same result, skipped Retried build at Fri Sep 21 10:52:00 2012 returned same result, skipped