Memory limit set to 110504152KB Using BUILD_ROOT=/srv/build/root_7 Using BUILD_ARCH=armv7el w08 started "build pciutils.spec" at Thu Sep 20 20:55:16 UTC 2012. Building pciutils for project 'Tizen:Devel:Main' repository 'standard' arch 'armv7el' srcmd5 '2fa3cb62748e1a5d32f736559cc82e93' processing specfile /srv/build/root_7/.build-srcdir/pciutils.spec ... running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/pciutils.spec init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/pciutils.spec build rpmlint-Factory ... copying qemu /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason [1/56] preinstalling nss... [2/56] preinstalling libfile-x86-arm... [3/56] preinstalling elfutils-libelf-x86-arm... [4/56] preinstalling nss-softokn-freebl-x86-arm... [5/56] preinstalling nss-x86-arm... [6/56] preinstalling nspr-x86-arm... [7/56] preinstalling libgcc-x86-arm... [8/56] preinstalling libacl-x86-arm... [9/56] preinstalling libattr-x86-arm... [10/56] preinstalling libcap-x86-arm... [11/56] preinstalling liblua-x86-arm... [12/56] preinstalling popt-x86-arm... [13/56] preinstalling xz-libs-x86-arm... [14/56] preinstalling zlib-x86-arm... [15/56] preinstalling file... [16/56] preinstalling sqlite-x86-arm... [17/56] preinstalling mpfr-x86-arm... [18/56] preinstalling gmp-x86-arm... [19/56] preinstalling mpc-x86-arm... [20/56] preinstalling bzip2-libs-x86-arm... [21/56] preinstalling rpm-x86-arm... [22/56] preinstalling rpm-libs-x86-arm... [23/56] preinstalling rpm-build-x86-arm... [24/56] preinstalling tizen-accelerator... [25/56] preinstalling eglibc-x86-arm... [26/56] preinstalling ncurses-libs-x86-arm... [27/56] preinstalling bash-x86-arm... [28/56] preinstalling rpm... [29/56] preinstalling rpm-libs... [30/56] preinstalling setup... [31/56] preinstalling filesystem... [32/56] preinstalling bash... [33/56] preinstalling bzip2... [34/56] preinstalling coreutils... [35/56] preinstalling diffutils... [36/56] preinstalling liblua... [37/56] preinstalling eglibc... [38/56] preinstalling eglibc-common... [39/56] preinstalling libacl... [40/56] preinstalling libattr... [41/56] preinstalling libgcc... [42/56] preinstalling libcap... [43/56] preinstalling popt... [44/56] preinstalling readline... [45/56] preinstalling sed... [46/56] preinstalling tar... [47/56] preinstalling zlib... [48/56] preinstalling sqlite... [49/56] preinstalling ncurses-libs... [50/56] preinstalling elfutils-libelf... [51/56] preinstalling bzip2-libs... [52/56] preinstalling libstdc++... [53/56] preinstalling libfile... [54/56] preinstalling xz-libs... [55/56] preinstalling nspr... [56/56] preinstalling nss-softokn-freebl... running rpm-x86-arm postinstall script running rpm-libs-x86-arm postinstall script running rpm-build-x86-arm postinstall script mv: cannot stat `/usr/bin/rpmbuild': No such file or directory mv: cannot stat `/usr/lib/rpm/debugedit': No such file or directory mv: cannot stat `/usr/lib/rpm/elfdeps': No such file or directory mv: cannot stat `/usr/lib/rpm/javadeps': No such file or directory mv: cannot stat `/usr/lib/rpm/rpmdeps': No such file or directory running tizen-accelerator postinstall script running bash-x86-arm postinstall script initializing rpm db... reordering...cycle: bash -> eglibc -> eglibc-common breaking dependency eglibc-common -> bash cycle: eglibc -> eglibc-common breaking dependency eglibc-common -> eglibc cycle: eglibc -> eglibc-common -> libgcc breaking dependency eglibc -> eglibc-common cycle: eglibc -> libgcc breaking dependency libgcc -> eglibc cycle: filesystem -> setup breaking dependency setup -> filesystem cycle: ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses cycle: ncurses-base -> ncurses -> ncurses-libs breaking dependency ncurses-libs -> ncurses-base cycle: perl -> perl-libs breaking dependency perl -> perl-libs cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel breaking dependency perl -> perl-ExtUtils-MakeMaker cycle: perl -> perl-IO-Compress-Zlib breaking dependency perl -> perl-IO-Compress-Zlib cycle: perl-IO-Compress-Base -> perl breaking dependency perl -> perl-IO-Compress-Base cycle: perl -> perl-Module-Pluggable breaking dependency perl -> perl-Module-Pluggable cycle: perl -> perl-Pod-Simple breaking dependency perl -> perl-Pod-Simple cycle: perl-devel -> perl-ExtUtils-MakeMaker breaking dependency perl-devel -> perl-ExtUtils-MakeMaker cycle: perl-ExtUtils-ParseXS -> perl-devel breaking dependency perl-devel -> perl-ExtUtils-ParseXS cycle: libcurl -> openssl -> perl-WWW-Curl breaking dependency openssl -> perl-WWW-Curl cycle: nss -> nss-sysinit breaking dependency nss -> nss-sysinit cycle: perl-CPAN -> perl-Test-Harness breaking dependency perl-Test-Harness -> perl-CPAN cycle: rpm-libs -> rpm breaking dependency rpm -> rpm-libs done [1/138] [2/138] installing kernel-headers-2.6.36-slp.1.1 [3/138] installing tizen-release-1.0.0-slp.1.1 [4/138] installing tzdata-2011h-slp.1.1 [5/138] installing libgcc-4.5.3-slp.1.1 [6/138] installing setup-0.1-slp.1.1 [7/138] installing filesystem-0.1-slp.1.1 warning: group lock does not exist - using root warning: group mail does not exist - using root [8/138] installing eglibc-2.13-slp.1.4 [9/138] installing eglibc-common-2.13-slp.1.4 warning: %post(eglibc-common-2.13-slp.1.4.armv7l) scriptlet failed, exit status 255 [10/138] installing bash-4.1-slp.1.1 [11/138] installing bzip2-libs-1.0.5-slp.2.3 [12/138] installing cpio-2.11-slp.1.1 [13/138] installing diffutils-3.0-slp.1.1 [14/138] installing e2fsprogs-libs-1.41.9-slp.2.1 [15/138] installing elfutils-libelf-0.152-slp.1.4 [16/138] installing fdupes-1.40-slp.42.1 [17/138] installing findutils-4.2.31-slp.1.1 [18/138] installing gdbm-1.8.3-slp.1.1 [19/138] installing libattr-2.4.44-slp.7.2 [20/138] installing libgomp-4.5.3-slp.1.1 [21/138] installing libidn-1.15-slp.1.1 [22/138] installing liblua-5.1.4-slp.6.1 [23/138] installing libstdc++-4.5.3-slp.1.1 [24/138] installing libuuid-2.16.2-slp.1.1 [25/138] installing m4-1.4.14-slp.1.1 [26/138] installing net-tools-1.60-slp.87.1 [27/138] installing nspr-4.9-slp.1.4 [28/138] installing nss-softokn-freebl-3.12.9-slp.4.3 [29/138] installing patch-2.6-slp.1.1 [30/138] installing pkgconfig-0.25-slp.2.1 [31/138] installing popt-1.16-slp.1.1 [32/138] installing readline-5.2-slp.13.1 [33/138] installing sed-4.1.5-slp.1.1 [34/138] installing sqlite-3.7.9-slp.3.1 [35/138] installing tar-1.17-slp.1.1 [36/138] installing xz-libs-5.0.3-slp.1.1 [37/138] installing zlib-1.2.5-slp.2.2 [38/138] installing ncurses-libs-5.7-slp.4.1 [39/138] installing build-compare-2009.10.14-slp.26.1 [40/138] installing libstdc++-devel-4.5.3-slp.1.1 [41/138] installing eglibc-headers-2.13-slp.1.4 [42/138] installing libcap-2.21-slp.1.1 [43/138] installing unzip-6.0-slp.9.2 [44/138] installing zlib-devel-1.2.5-slp.2.2 [45/138] installing c-ares-1.7.4-slp.1.1 [46/138] installing gmp-5.0.1-slp.1.1 [47/138] installing libacl-2.2.49-slp.1.1 [48/138] installing libfile-5.04-slp.1.1 [49/138] installing libpcre-7.6.4-slp.1.1 [50/138] installing make-3.82-slp.152.1 [51/138] installing ncurses-5.7-slp.4.1 [52/138] installing binutils-2.22-slp.1.1 [53/138] installing bzip2-1.0.5-slp.2.3 [54/138] installing libblkid-2.16.2-slp.1.1 [55/138] installing xz-5.0.3-slp.1.1 [56/138] installing elfutils-libs-0.152-slp.1.4 [57/138] installing nss-3.12.9-slp.4.3 [58/138] installing perl-5.12.1-slp.61.5 [59/138] installing ncurses-base-5.7-slp.4.1 [60/138] installing perl-IO-Compress-Base-2.008-slp.61.5 [61/138] installing perl-Module-Pluggable-3.60-slp.61.5 [62/138] installing perl-Pod-Escapes-1.04-slp.61.5 [63/138] installing perl-TimeDate-1.20-slp.1.1 [64/138] installing eglibc-devel-2.13-slp.1.4 [65/138] installing file-5.04-slp.1.1 [66/138] installing grep-2.5.1a-slp.61.1 [67/138] installing mpfr-3.0.0-slp.1.1 [68/138] installing perl-Compress-Raw-Zlib-2.008-slp.61.5 [69/138] installing perl-devel-5.12.1-slp.61.5 [70/138] installing perl-libs-5.12.1-slp.61.5 [71/138] installing coreutils-6.9-slp.9.3 [72/138] installing xz-lzma-compat-5.0.3-slp.1.1 [73/138] installing elfutils-0.152-slp.1.4 [74/138] installing nss-sysinit-3.12.9-slp.4.3 [75/138] installing util-linux-ng-2.16.2-slp.1.1 warning: group tty does not exist - using root /bin/chown: `root:root': invalid user [76/138] installing perl-ExtUtils-ParseXS-2.18-slp.61.5 [77/138] installing perl-Pod-Simple-3.07-slp.61.5 [78/138] installing tizen-accelerator-1.0.1-slp.1.1 [79/138] installing perl-IO-Compress-Zlib-2.008-slp.61.5 [80/138] installing perl-Test-Harness-3.12-slp.61.5 [81/138] installing gawk-3.1.5-slp.1.1 [82/138] installing gzip-1.3.14-slp.1.1 [83/138] installing mpc-0.9-slp.1.1 [84/138] installing build-2011.01.10a-slp.1.1 [85/138] installing openssl-1.0.0f-slp.1.1 [86/138] installing bzip2-libs-x86-arm-1.0.5-slp.8.1 [87/138] installing eglibc-x86-arm-2.13-slp.8.1 [88/138] installing elfutils-libelf-x86-arm-0.152-slp.8.1 [89/138] installing elfutils-libs-x86-arm-0.152-slp.8.1 [90/138] installing gmp-x86-arm-5.0.1-slp.8.1 [91/138] installing libacl-x86-arm-2.2.49-slp.8.1 [92/138] installing libattr-x86-arm-2.4.44-slp.8.1 [93/138] installing libcap-x86-arm-2.21-slp.8.1 [94/138] installing libfile-x86-arm-5.04-slp.8.1 [95/138] installing libgcc-x86-arm-4.5.3-slp.8.1 [96/138] installing liblua-x86-arm-5.1.4-slp.8.1 [97/138] installing mpc-x86-arm-0.9-slp.8.1 [98/138] installing mpfr-x86-arm-3.0.0-slp.8.1 [99/138] installing ncurses-libs-x86-arm-5.7-slp.8.1 [100/138] installing nspr-x86-arm-4.9-slp.8.1 [101/138] installing nss-softokn-freebl-x86-arm-3.12.9-slp.8.1 [102/138] installing nss-x86-arm-3.12.9-slp.8.1 [103/138] installing perl-ExtUtils-MakeMaker-6.36-slp.61.5 [104/138] installing popt-x86-arm-1.16-slp.8.1 [105/138] installing sqlite-x86-arm-3.7.9-slp.8.1 [106/138] installing xz-libs-x86-arm-5.0.3-slp.8.1 [107/138] installing zlib-x86-arm-1.2.5-slp.8.1 [108/138] installing cpp-4.5.3-slp.1.1 [109/138] installing libcurl-7.21.3-slp.1.1 [110/138] installing curl-7.21.3-slp.1.1 [111/138] installing perl-CPAN-1.9205-slp.61.5 [112/138] installing bash-x86-arm-4.1-slp.8.1 [113/138] installing fdupes-x86-arm-1.40-slp.8.1 [114/138] installing findutils-x86-arm-4.2.31-slp.8.1 [115/138] installing gawk-x86-arm-3.1.5-slp.8.1 [116/138] installing gzip-x86-arm-1.3.14-slp.8.1 [117/138] installing make-x86-arm-3.82-slp.8.1 [118/138] installing sed-x86-arm-4.1.5-slp.8.1 [119/138] installing tar-x86-arm-1.17-slp.8.1 [120/138] installing diffutils-x86-arm-3.0-slp.8.1 [121/138] installing patch-x86-arm-2.6-slp.8.1 [122/138] installing perl-WWW-Curl-4.05-slp.4.1 [123/138] installing autoconf-2.68-slp.1.1 [124/138] installing coreutils-x86-arm-6.9-slp.8.1 [125/138] installing file-x86-arm-5.04-slp.8.1 [126/138] installing elfutils-x86-arm-0.152-slp.8.1 [127/138] installing gcc-4.5.3-slp.1.1 [128/138] installing automake-1.11.1-slp.3.1 [129/138] installing gcc-c++-4.5.3-slp.1.1 [130/138] installing rpm-4.9.1-slp.1.1 [131/138] installing libtool-2.2.6b-slp.1.1 [132/138] installing cross-armv7l-gcc-accel-armv7l-4.5.3-slp.1.1 "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " GCC and GCC-accel versions match. Enabling cross-compiler. cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [133/138] installing rpm-libs-4.9.1-slp.1.1 [134/138] installing rpm-libs-x86-arm-4.9.1-slp.8.1 [135/138] installing cross-armv7l-binutils-accel-armv7l-2.22-slp.1.1 mv: cannot stat `/usr/bin/gprov': No such file or directory [136/138] installing rpm-build-4.9.1-slp.1.1 [137/138] installing rpm-x86-arm-4.9.1-slp.8.1 /bin/rpm.orig-arm already present - skipping. /usr/bin/rpm2cpio.orig-arm already present - skipping. /usr/bin/rpmdb.orig-arm already present - skipping. /usr/bin/rpmquery.orig-arm already present - skipping. /usr/bin/rpmsign.orig-arm already present - skipping. /usr/bin/rpmverify.orig-arm already present - skipping. [138/138] installing rpm-build-x86-arm-4.9.1-slp.8.1 now finalizing build dir... /var/run/obs/worker/7/build/build: line 1761: /srv/build/root_7/etc/passwd: No such file or directory build target is armv7l-tizen-linux ----------------------------------------------------------------- I have the following modifications for pciutils.spec: 4c4 < Release: 9 --- > Release: slp.9.1 ----------------------------------------------------------------- ----- building pciutils.spec (user abuild) ----------------------------------------------------------------- ----------------------------------------------------------------- + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:Devel:Main/standard/2fa3cb62748e1a5d32f736559cc82e93-pciutils' /home/abuild/rpmbuild/SOURCES/pciutils.spec Building target platforms: armv7l-tizen-linux Building for target armv7l-tizen-linux Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8m5zlS + umask 022 + cd /home/abuild/rpmbuild/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/abuild/rpmbuild/BUILD + rm -rf pciutils-3.0.0 + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pciutils-3.0.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd pciutils-3.0.0 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ZJsN3T + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd pciutils-3.0.0 + LANG=C + export LANG + unset DISPLAY + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir' + export FFLAGS + LD_AS_NEEDED=1 + export LD_AS_NEEDED + make SHARED=yes PREFIX=/usr SBINDIR=/usr/bin IDSDIR=/usr/share/misc cd lib && ./configure Configuring libpci for your system... armv7l--linux 3.1.10-1.16-default Looking for access methods... sysfs proc dump Checking for zlib support... yes (auto-detected) Checking for DNS support... yes (auto-detected) Checking whether to build a shared library... yes (set manually) make -C lib all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pciutils-3.0.0/lib' cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o init.o init.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o access.o access.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o generic.o generic.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o dump.o dump.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o names.o names.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o filter.o filter.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o names-hash.o names-hash.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o names-parse.o names-parse.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o names-net.o names-net.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o names-cache.o names-cache.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o params.o params.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o sysfs.o sysfs.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -fPIC -fvisibility=hidden -c -o proc.o proc.c cc -shared -Wl,-soname,libpci.so.3 -Wl,--version-script=libpci.ver -o libpci.so.3.0.0 init.o access.o generic.o dump.o names.o filter.o names-hash.o names-parse.o names-net.o names-cache.o params.o sysfs.o proc.o -lz -lresolv rm -f libpci.a ar rcs libpci.a init.o access.o generic.o dump.o names.o filter.o names-hash.o names-parse.o names-net.o names-cache.o params.o sysfs.o proc.o ranlib libpci.a sed libpci.pc -e 's,@PREFIX@,/usr,' \ -e 's,@INCDIR@,/usr/include,' \ -e 's,@LIBDIR@,/usr/lib,' \ -e 's,@IDSDIR@,/usr/share/misc,' \ -e 's,@VERSION@,3.0.0,' \ -e 's,@LDLIBS@,,' make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pciutils-3.0.0/lib' cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -c -o lspci.o lspci.c cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -c -o common.o common.c cc lspci.o common.o lib/libpci.so.3.0.0 -o lspci cc lspci.o common.o lib/libpci.a -lz -lresolv -o lspci-udeb cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -c -o setpci.o setpci.c cc setpci.o common.o lib/libpci.so.3.0.0 -o setpci cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -c -o example.o example.c cc example.o lib/libpci.so.3.0.0 -o example M=`echo 2008-04-10 | sed 's/-01-/-January-/;s/-02-/-February-/;s/-03-/-March-/;s/-04-/-April-/;s/-05-/-May-/;s/-06-/-June-/;s/-07-/-July-/;s/-08-/-August-/;s/-09-/-September-/;s/-10-/-October-/;s/-11-/-November-/;s/-12-/-December-/;s/\(.*\)-\(.*\)-\(.*\)/\3 \2 \1/'` ; sed lspci.8 "s/@TODAY@/$M/;s/@VERSION@/pciutils-3.0.0/;s#@IDSDIR@#/usr/share/misc#" M=`echo 2008-04-10 | sed 's/-01-/-January-/;s/-02-/-February-/;s/-03-/-March-/;s/-04-/-April-/;s/-05-/-May-/;s/-06-/-June-/;s/-07-/-July-/;s/-08-/-August-/;s/-09-/-September-/;s/-10-/-October-/;s/-11-/-November-/;s/-12-/-December-/;s/\(.*\)-\(.*\)-\(.*\)/\3 \2 \1/'` ; sed setpci.8 "s/@TODAY@/$M/;s/@VERSION@/pciutils-3.0.0/;s#@IDSDIR@#/usr/share/misc#" M=`echo 2008-04-10 | sed 's/-01-/-January-/;s/-02-/-February-/;s/-03-/-March-/;s/-04-/-April-/;s/-05-/-May-/;s/-06-/-June-/;s/-07-/-July-/;s/-08-/-August-/;s/-09-/-September-/;s/-10-/-October-/;s/-11-/-November-/;s/-12-/-December-/;s/\(.*\)-\(.*\)-\(.*\)/\3 \2 \1/'` ; sed pcilib.7 "s/@TODAY@/$M/;s/@VERSION@/pciutils-3.0.0/;s#@IDSDIR@#/usr/share/misc#" sed update-pciids "s@^FILE=.*@FILE=/usr/share/misc/pci.ids@" chmod +x update-pciids M=`echo 2008-04-10 | sed 's/-01-/-January-/;s/-02-/-February-/;s/-03-/-March-/;s/-04-/-April-/;s/-05-/-May-/;s/-06-/-June-/;s/-07-/-July-/;s/-08-/-August-/;s/-09-/-September-/;s/-10-/-October-/;s/-11-/-November-/;s/-12-/-December-/;s/\(.*\)-\(.*\)-\(.*\)/\3 \2 \1/'` ; sed update-pciids.8 "s/@TODAY@/$M/;s/@VERSION@/pciutils-3.0.0/;s#@IDSDIR@#/usr/share/misc#" gzip -9 pci.ids.gz cc -O2 -g -Wall -W -Wno-parentheses -Wstrict-prototypes -Wmissing-prototypes -c -o pcimodules.o pcimodules.c pcimodules.c:63:1: warning: no previous prototype for 'read_pcimap' cc pcimodules.o common.o lib/libpci.so.3.0.0 -o pcimodules M=`echo 2008-04-10 | sed 's/-01-/-January-/;s/-02-/-February-/;s/-03-/-March-/;s/-04-/-April-/;s/-05-/-May-/;s/-06-/-June-/;s/-07-/-July-/;s/-08-/-August-/;s/-09-/-September-/;s/-10-/-October-/;s/-11-/-November-/;s/-12-/-December-/;s/\(.*\)-\(.*\)-\(.*\)/\3 \2 \1/'` ; sed pcimodules.8 "s/@TODAY@/$M/;s/@VERSION@/pciutils-3.0.0/;s#@IDSDIR@#/usr/share/misc#" + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Q8oII4 + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd pciutils-3.0.0 + LANG=C + export LANG + unset DISPLAY + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm + make PREFIX=/usr SBINDIR=/usr/bin IDSDIR=/usr/share/misc install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm make -C lib all make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pciutils-3.0.0/lib' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pciutils-3.0.0/lib' install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/bin /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/misc /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/man/man8 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/man/man7 install -c -m 755 -s lspci setpci pcimodules /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/bin #install -c -m 755 -s lspci-udeb /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm-udeb/usr/bin/lspci install -c -m 755 update-pciids /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/bin install -c -m 644 pci.ids.gz /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/misc install -c -m 644 lspci.8 setpci.8 update-pciids.8 pcimodules.8 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/man/man8 install -c -m 644 pcilib.7 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/man/man7 + gunzip /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/misc/pci.ids.gz + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/include/pci + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/lib/pkgconfig + install -m 644 lib/pci.h lib/header.h lib/config.h lib/types.h /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/include/pci + install -m 644 lib/libpci.pc /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/lib/pkgconfig + ln -s libpci.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/lib/libpci.so + install -m 744 lib/libpci.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/lib + ln -s libpci.so.3.0.0 /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/lib/libpci.so.3 + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/info + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/doc + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/doc/pciutils + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/gtk-doc + rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/share/man + find /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm -regex '.*/man/man./.*.[0-9]' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm -regex '.*/man/../man./.*.[0-9]' + xargs rm -f -- + find /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm -regex '.*/man/man./.*.[0-9]pm' + xargs rm -f -- + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/pciutils-3.0.0 WARNING: /usr/bin/lspci is already stripped! WARNING: /usr/bin/pcimodules is already stripped! WARNING: /usr/bin/setpci is already stripped! extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm/usr/lib/libpci.so.3.0.0 symlinked /usr/lib/debug/usr/lib/libpci.so.3.0.0.debug to /usr/lib/debug/usr/lib/libpci.so.3.debug symlinked /usr/lib/debug/usr/lib/libpci.so.3.0.0.debug to /usr/lib/debug/usr/lib/libpci.so.debug 136 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm//brp-compress + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump + /usr/lib/rpm/brp-python-bytecompile + /usr/lib/rpm/brp-python-hardlink + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm Processing files: pciutils-3.0.0-slp.9.1.armv7l Requires(interp): /bin/sh /bin/sh /bin/sh Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires(pre): /bin/sh Requires(post): /bin/sh Requires(postun): /bin/sh Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libpci.so.3 libpci.so.3(LIBPCI_3.0) Processing files: libpci3-3.0.0-slp.9.1.armv7l Provides: libpci.so.3 libpci.so.3(LIBPCI_3.0) Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libresolv.so.2 libresolv.so.2(GLIBC_2.4) libz.so.1 Processing files: libpci-devel-3.0.0-slp.9.1.armv7l Provides: pkgconfig(libpci) = 3.0.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: /usr/bin/pkg-config libpci.so.3 Processing files: pciutils-debuginfo-3.0.0-slp.9.1.armv7l Processing files: pciutils-debugsource-3.0.0-slp.9.1.armv7l Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm Wrote: /home/abuild/rpmbuild/SRPMS/pciutils-3.0.0-slp.9.1.src.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pciutils-3.0.0-slp.9.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpci3-3.0.0-slp.9.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpci-devel-3.0.0-slp.9.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pciutils-debuginfo-3.0.0-slp.9.1.armv7l.rpm Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pciutils-debugsource-3.0.0-slp.9.1.armv7l.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.toUvOG + umask 022 + cd /home/abuild/rpmbuild/BUILD + cd pciutils-3.0.0 + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pciutils-3.0.0-slp.9.1.arm + exit 0 ... checking for files with abuild user/group ... creating baselibs w08 finished "build pciutils.spec" at Thu Sep 20 20:55:43 UTC 2012. Retried build at Fri Sep 21 08:19:10 2012 returned same result, skipped Retried build at Fri Sep 21 08:22:31 2012 returned same result, skipped Retried build at Fri Sep 21 08:25:19 2012 returned same result, skipped Retried build at Fri Sep 21 09:44:04 2012 returned same result, skipped Retried build at Fri Sep 21 10:52:01 2012 returned same result, skipped