Memory limit set to 110504152KB
Using BUILD_ROOT=/srv/build/root_5
Using BUILD_ARCH=armv7el


w29 started "build xorg-x11-proto-gesture.spec" at Thu Sep 20 20:56:00 UTC 2012.

Building xorg-x11-proto-gesture for project 'Tizen:Devel:Main' repository 'standard' arch 'armv7el' srcmd5 'bd5793db9bcc5f75c44ca855fa94f921'

processing specfile /srv/build/root_5/.build-srcdir/xorg-x11-proto-gesture.spec ...
running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/xorg-x11-proto-gesture.spec
init_buildsystem --cachedir /var/cache/build --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/xorg-x11-proto-gesture.spec build rpmlint-Factory ...
copying qemu
 /usr/bin/qemu-alpha /usr/bin/qemu-alpha-binfmt /usr/bin/qemu-arm /usr/bin/qemu-arm-binfmt /usr/bin/qemu-armeb /usr/bin/qemu-armeb-binfmt /usr/bin/qemu-cris /usr/bin/qemu-cris-binfmt /usr/bin/qemu-i386 /usr/bin/qemu-i386-binfmt /usr/bin/qemu-m68k /usr/bin/qemu-m68k-binfmt /usr/bin/qemu-microblaze /usr/bin/qemu-microblaze-binfmt /usr/bin/qemu-mips /usr/bin/qemu-mips-binfmt /usr/bin/qemu-mipsel /usr/bin/qemu-mipsel-binfmt /usr/bin/qemu-mipsn32 /usr/bin/qemu-mipsn32-binfmt /usr/bin/qemu-mipsn32el /usr/bin/qemu-mipsn32el-binfmt /usr/bin/qemu-ppc /usr/bin/qemu-ppc-binfmt /usr/bin/qemu-ppc64 /usr/bin/qemu-ppc64-binfmt /usr/bin/qemu-ppc64abi32 /usr/bin/qemu-ppc64abi32-binfmt /usr/bin/qemu-s390x /usr/bin/qemu-s390x-binfmt /usr/bin/qemu-sh4 /usr/bin/qemu-sh4-binfmt /usr/bin/qemu-sh4eb /usr/bin/qemu-sh4eb-binfmt /usr/bin/qemu-sparc /usr/bin/qemu-sparc-binfmt /usr/bin/qemu-sparc32plus /usr/bin/qemu-sparc32plus-binfmt /usr/bin/qemu-sparc64 /usr/bin/qemu-sparc64-binfmt /usr/bin/qemu-x86_64 /usr/bin/qemu-x86_64-binfmt /usr/sbin/qemu-binfmt-conf.sh

Warning: mmap_min_addr is != 0. If programs fail at mmap this could be the reason
[1/56] preinstalling nss...
[2/56] preinstalling libfile-x86-arm...
[3/56] preinstalling elfutils-libelf-x86-arm...
[4/56] preinstalling nss-softokn-freebl-x86-arm...
[5/56] preinstalling nss-x86-arm...
[6/56] preinstalling nspr-x86-arm...
[7/56] preinstalling libgcc-x86-arm...
[8/56] preinstalling libacl-x86-arm...
[9/56] preinstalling libattr-x86-arm...
[10/56] preinstalling libcap-x86-arm...
[11/56] preinstalling liblua-x86-arm...
[12/56] preinstalling popt-x86-arm...
[13/56] preinstalling xz-libs-x86-arm...
[14/56] preinstalling zlib-x86-arm...
[15/56] preinstalling file...
[16/56] preinstalling sqlite-x86-arm...
[17/56] preinstalling mpfr-x86-arm...
[18/56] preinstalling gmp-x86-arm...
[19/56] preinstalling mpc-x86-arm...
[20/56] preinstalling bzip2-libs-x86-arm...
[21/56] preinstalling rpm-x86-arm...
[22/56] preinstalling rpm-libs-x86-arm...
[23/56] preinstalling rpm-build-x86-arm...
[24/56] preinstalling tizen-accelerator...
[25/56] preinstalling eglibc-x86-arm...
[26/56] preinstalling ncurses-libs-x86-arm...
[27/56] preinstalling bash-x86-arm...
[28/56] preinstalling rpm...
[29/56] preinstalling rpm-libs...
[30/56] preinstalling setup...
[31/56] preinstalling filesystem...
[32/56] preinstalling bash...
[33/56] preinstalling bzip2...
[34/56] preinstalling coreutils...
[35/56] preinstalling diffutils...
[36/56] preinstalling liblua...
[37/56] preinstalling eglibc...
[38/56] preinstalling eglibc-common...
[39/56] preinstalling libacl...
[40/56] preinstalling libattr...
[41/56] preinstalling libgcc...
[42/56] preinstalling libcap...
[43/56] preinstalling popt...
[44/56] preinstalling readline...
[45/56] preinstalling sed...
[46/56] preinstalling tar...
[47/56] preinstalling zlib...
[48/56] preinstalling sqlite...
[49/56] preinstalling ncurses-libs...
[50/56] preinstalling elfutils-libelf...
[51/56] preinstalling bzip2-libs...
[52/56] preinstalling libstdc++...
[53/56] preinstalling libfile...
[54/56] preinstalling xz-libs...
[55/56] preinstalling nspr...
[56/56] preinstalling nss-softokn-freebl...
running rpm-x86-arm postinstall script
running rpm-libs-x86-arm postinstall script
running rpm-build-x86-arm postinstall script
mv: cannot stat `/usr/bin/rpmbuild': No such file or directory
mv: cannot stat `/usr/lib/rpm/debugedit': No such file or directory
mv: cannot stat `/usr/lib/rpm/elfdeps': No such file or directory
mv: cannot stat `/usr/lib/rpm/javadeps': No such file or directory
mv: cannot stat `/usr/lib/rpm/rpmdeps': No such file or directory
running tizen-accelerator postinstall script
running bash-x86-arm postinstall script
initializing rpm db...
reordering...cycle: bash -> eglibc -> eglibc-common
  breaking dependency eglibc-common -> bash
cycle: eglibc -> eglibc-common
  breaking dependency eglibc-common -> eglibc
cycle: eglibc -> eglibc-common -> libgcc
  breaking dependency eglibc -> eglibc-common
cycle: eglibc -> libgcc
  breaking dependency libgcc -> eglibc
cycle: filesystem -> setup
  breaking dependency setup -> filesystem
cycle: ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses
cycle: ncurses-base -> ncurses -> ncurses-libs
  breaking dependency ncurses-libs -> ncurses-base
cycle: perl -> perl-libs
  breaking dependency perl -> perl-libs
cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel
  breaking dependency perl -> perl-ExtUtils-MakeMaker
cycle: perl -> perl-IO-Compress-Zlib
  breaking dependency perl -> perl-IO-Compress-Zlib
cycle: perl-IO-Compress-Base -> perl
  breaking dependency perl -> perl-IO-Compress-Base
cycle: perl -> perl-Module-Pluggable
  breaking dependency perl -> perl-Module-Pluggable
cycle: perl -> perl-Pod-Simple
  breaking dependency perl -> perl-Pod-Simple
cycle: perl-devel -> perl-ExtUtils-MakeMaker
  breaking dependency perl-devel -> perl-ExtUtils-MakeMaker
cycle: perl-ExtUtils-ParseXS -> perl-devel
  breaking dependency perl-devel -> perl-ExtUtils-ParseXS
cycle: libcurl -> openssl -> perl-WWW-Curl
  breaking dependency openssl -> perl-WWW-Curl
cycle: nss -> nss-sysinit
  breaking dependency nss -> nss-sysinit
cycle: perl-CPAN -> perl-Test-Harness
  breaking dependency perl-Test-Harness -> perl-CPAN
cycle: rpm-libs -> rpm
  breaking dependency rpm -> rpm-libs
done
[1/138] [2/138] installing kernel-headers-2.6.36-slp.1.1
[3/138] installing tizen-release-1.0.0-slp.1.1
[4/138] installing tzdata-2011h-slp.1.1
[5/138] installing libgcc-4.5.3-slp.1.1
[6/138] installing setup-0.1-slp.1.1
[7/138] installing filesystem-0.1-slp.1.1
warning: group lock does not exist - using root
warning: group mail does not exist - using root
[8/138] installing eglibc-2.13-slp.1.4
[9/138] installing eglibc-common-2.13-slp.1.4
warning: %post(eglibc-common-2.13-slp.1.4.armv7l) scriptlet failed, exit status 255
[10/138] installing bash-4.1-slp.1.1
[11/138] installing bzip2-libs-1.0.5-slp.2.3
[12/138] installing cpio-2.11-slp.1.1
[13/138] installing diffutils-3.0-slp.1.1
[14/138] installing e2fsprogs-libs-1.41.9-slp.2.1
[15/138] installing elfutils-libelf-0.152-slp.1.4
[16/138] installing fdupes-1.40-slp.42.1
[17/138] installing findutils-4.2.31-slp.1.1
[18/138] installing gdbm-1.8.3-slp.1.1
[19/138] installing libattr-2.4.44-slp.7.2
[20/138] installing libgomp-4.5.3-slp.1.1
[21/138] installing libidn-1.15-slp.1.1
[22/138] installing liblua-5.1.4-slp.6.1
[23/138] installing libstdc++-4.5.3-slp.1.1
[24/138] installing libuuid-2.16.2-slp.1.1
[25/138] installing m4-1.4.14-slp.1.1
[26/138] installing net-tools-1.60-slp.87.1
[27/138] installing nspr-4.9-slp.1.4
[28/138] installing nss-softokn-freebl-3.12.9-slp.4.3
[29/138] installing patch-2.6-slp.1.1
[30/138] installing pkgconfig-0.25-slp.2.1
[31/138] installing popt-1.16-slp.1.1
[32/138] installing readline-5.2-slp.13.1
[33/138] installing sed-4.1.5-slp.1.1
[34/138] installing sqlite-3.7.9-slp.3.1
[35/138] installing tar-1.17-slp.1.1
[36/138] installing xz-libs-5.0.3-slp.1.1
[37/138] installing zlib-1.2.5-slp.2.2
[38/138] installing ncurses-libs-5.7-slp.4.1
[39/138] installing build-compare-2009.10.14-slp.26.1
[40/138] installing libstdc++-devel-4.5.3-slp.1.1
[41/138] installing xorg-x11-xutils-dev-7.7-slp.1.1
[42/138] installing eglibc-headers-2.13-slp.1.4
[43/138] installing libcap-2.21-slp.1.1
[44/138] installing unzip-6.0-slp.9.2
[45/138] installing c-ares-1.7.4-slp.1.1
[46/138] installing gmp-5.0.1-slp.1.1
[47/138] installing libacl-2.2.49-slp.1.1
[48/138] installing libfile-5.04-slp.1.1
[49/138] installing libpcre-7.6.4-slp.1.1
[50/138] installing make-3.82-slp.152.1
[51/138] installing ncurses-5.7-slp.4.1
[52/138] installing binutils-2.22-slp.1.1
[53/138] installing bzip2-1.0.5-slp.2.3
[54/138] installing libblkid-2.16.2-slp.1.1
[55/138] installing xz-5.0.3-slp.1.1
[56/138] installing elfutils-libs-0.152-slp.1.4
[57/138] installing nss-3.12.9-slp.4.3
[58/138] installing perl-5.12.1-slp.61.5
[59/138] installing ncurses-base-5.7-slp.4.1
[60/138] installing perl-IO-Compress-Base-2.008-slp.61.5
[61/138] installing perl-Module-Pluggable-3.60-slp.61.5
[62/138] installing perl-Pod-Escapes-1.04-slp.61.5
[63/138] installing perl-TimeDate-1.20-slp.1.1
[64/138] installing eglibc-devel-2.13-slp.1.4
[65/138] installing file-5.04-slp.1.1
[66/138] installing grep-2.5.1a-slp.61.1
[67/138] installing mpfr-3.0.0-slp.1.1
[68/138] installing perl-Compress-Raw-Zlib-2.008-slp.61.5
[69/138] installing perl-devel-5.12.1-slp.61.5
[70/138] installing perl-libs-5.12.1-slp.61.5
[71/138] installing coreutils-6.9-slp.9.3
[72/138] installing xz-lzma-compat-5.0.3-slp.1.1
[73/138] installing elfutils-0.152-slp.1.4
[74/138] installing nss-sysinit-3.12.9-slp.4.3
[75/138] installing util-linux-ng-2.16.2-slp.1.1
warning: group tty does not exist - using root
/bin/chown: `root:root': invalid user
[76/138] installing perl-ExtUtils-ParseXS-2.18-slp.61.5
[77/138] installing perl-Pod-Simple-3.07-slp.61.5
[78/138] installing tizen-accelerator-1.0.1-slp.1.1
[79/138] installing perl-IO-Compress-Zlib-2.008-slp.61.5
[80/138] installing perl-Test-Harness-3.12-slp.61.5
[81/138] installing gawk-3.1.5-slp.1.1
[82/138] installing gzip-1.3.14-slp.1.1
[83/138] installing mpc-0.9-slp.1.1
[84/138] installing build-2011.01.10a-slp.1.1
[85/138] installing openssl-1.0.0f-slp.1.1
[86/138] installing bzip2-libs-x86-arm-1.0.5-slp.8.1
[87/138] installing eglibc-x86-arm-2.13-slp.8.1
[88/138] installing elfutils-libelf-x86-arm-0.152-slp.8.1
[89/138] installing elfutils-libs-x86-arm-0.152-slp.8.1
[90/138] installing gmp-x86-arm-5.0.1-slp.8.1
[91/138] installing libacl-x86-arm-2.2.49-slp.8.1
[92/138] installing libattr-x86-arm-2.4.44-slp.8.1
[93/138] installing libcap-x86-arm-2.21-slp.8.1
[94/138] installing libfile-x86-arm-5.04-slp.8.1
[95/138] installing libgcc-x86-arm-4.5.3-slp.8.1
[96/138] installing liblua-x86-arm-5.1.4-slp.8.1
[97/138] installing mpc-x86-arm-0.9-slp.8.1
[98/138] installing mpfr-x86-arm-3.0.0-slp.8.1
[99/138] installing ncurses-libs-x86-arm-5.7-slp.8.1
[100/138] installing nspr-x86-arm-4.9-slp.8.1
[101/138] installing nss-softokn-freebl-x86-arm-3.12.9-slp.8.1
[102/138] installing nss-x86-arm-3.12.9-slp.8.1
[103/138] installing perl-ExtUtils-MakeMaker-6.36-slp.61.5
[104/138] installing popt-x86-arm-1.16-slp.8.1
[105/138] installing sqlite-x86-arm-3.7.9-slp.8.1
[106/138] installing xz-libs-x86-arm-5.0.3-slp.8.1
[107/138] installing zlib-x86-arm-1.2.5-slp.8.1
[108/138] installing cpp-4.5.3-slp.1.1
[109/138] installing libcurl-7.21.3-slp.1.1
[110/138] installing curl-7.21.3-slp.1.1
[111/138] installing perl-CPAN-1.9205-slp.61.5
[112/138] installing bash-x86-arm-4.1-slp.8.1
[113/138] installing fdupes-x86-arm-1.40-slp.8.1
[114/138] installing findutils-x86-arm-4.2.31-slp.8.1
[115/138] installing gawk-x86-arm-3.1.5-slp.8.1
[116/138] installing gzip-x86-arm-1.3.14-slp.8.1
[117/138] installing make-x86-arm-3.82-slp.8.1
[118/138] installing sed-x86-arm-4.1.5-slp.8.1
[119/138] installing tar-x86-arm-1.17-slp.8.1
[120/138] installing diffutils-x86-arm-3.0-slp.8.1
[121/138] installing patch-x86-arm-2.6-slp.8.1
[122/138] installing perl-WWW-Curl-4.05-slp.4.1
[123/138] installing autoconf-2.68-slp.1.1
[124/138] installing coreutils-x86-arm-6.9-slp.8.1
[125/138] installing file-x86-arm-5.04-slp.8.1
[126/138] installing elfutils-x86-arm-0.152-slp.8.1
[127/138] installing gcc-4.5.3-slp.1.1
[128/138] installing automake-1.11.1-slp.3.1
[129/138] installing gcc-c++-4.5.3-slp.1.1
[130/138] installing rpm-4.9.1-slp.1.1
[131/138] installing libtool-2.2.6b-slp.1.1
[132/138] installing cross-armv7l-gcc-accel-armv7l-4.5.3-slp.1.1
"GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 "
GCC and GCC-accel versions match. Enabling cross-compiler.
cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory
cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory
[133/138] installing rpm-libs-4.9.1-slp.1.1
[134/138] installing rpm-libs-x86-arm-4.9.1-slp.8.1
[135/138] installing cross-armv7l-binutils-accel-armv7l-2.22-slp.1.1
mv: cannot stat `/usr/bin/gprov': No such file or directory
[136/138] installing rpm-build-4.9.1-slp.1.1
[137/138] installing rpm-x86-arm-4.9.1-slp.8.1
/bin/rpm.orig-arm already present - skipping.
/usr/bin/rpm2cpio.orig-arm already present - skipping.
/usr/bin/rpmdb.orig-arm already present - skipping.
/usr/bin/rpmquery.orig-arm already present - skipping.
/usr/bin/rpmsign.orig-arm already present - skipping.
/usr/bin/rpmverify.orig-arm already present - skipping.
[138/138] installing rpm-build-x86-arm-4.9.1-slp.8.1
now finalizing build dir...
/var/run/obs/worker/5/build/build: line 1761: /srv/build/root_5/etc/passwd: No such file or directory
Odd number of elements in hash assignment at /var/run/obs/worker/5/build/Build/Rpm.pm line 131, <SPEC> line 52.
Use of uninitialized value in concatenation (.) or string at /var/run/obs/worker/5/build/Build/Rpm.pm line 365, <SPEC> line 52.
build target is armv7l-tizen-linux
-----------------------------------------------------------------
I have the following modifications for xorg-x11-proto-gesture.spec:
4c4
< Release:  1
---
> Release:  slp.1.1
54c54
< %{_datadir}/pkgconfig/*.pc
\ No newline at end of file
---
> %{_datadir}/pkgconfig/*.pc
-----------------------------------------------------------------
----- building xorg-x11-proto-gesture.spec (user abuild)
-----------------------------------------------------------------
-----------------------------------------------------------------
+ exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:Devel:Main/standard/bd5793db9bcc5f75c44ca855fa94f921-xorg-x11-proto-gesture' /home/abuild/rpmbuild/SOURCES/xorg-x11-proto-gesture.spec
Building target platforms: armv7l-tizen-linux
Building for target armv7l-tizen-linux
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8gV0Bw
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /home/abuild/rpmbuild/BUILD
+ rm -rf xorg-x11-proto-gesture-0.1.0
+ /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-proto-gesture-0.1.0.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd xorg-x11-proto-gesture-0.1.0
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.II1nOz
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xorg-x11-proto-gesture-0.1.0
+ LANG=C
+ export LANG
+ unset DISPLAY
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir'
+ export FFLAGS
+ LD_AS_NEEDED=1
+ export LD_AS_NEEDED
+ ./autogen.sh
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf
autoreconf: configure.ac: not using Autoheader
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:10: installing `./config.guess'
configure.ac:10: installing `./config.sub'
configure.ac:3: installing `./install-sh'
configure.ac:3: installing `./missing'
autoreconf: Leaving directory `.'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... none
checking for gcc option to accept ISO C99... -std=gnu99
checking how to run the C preprocessor... gcc -std=gnu99 -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether __clang__ is declared... no
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... armv7l-unknown-linux-gnueabi
checking host system type... armv7l-unknown-linux-gnueabi
checking for a sed that does not truncate output... /bin/sed
checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no
checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no
checking if gcc -std=gnu99 supports-Wall... yes
checking if gcc -std=gnu99 supports-Wpointer-arith... yes
checking if gcc -std=gnu99 supports-Wmissing-declarations... yes
checking if gcc -std=gnu99 supports-Wformat=2... yes
checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes
checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes
checking if gcc -std=gnu99 supports-Wnested-externs... yes
checking if gcc -std=gnu99 supports-Wbad-function-cast... yes
checking if gcc -std=gnu99 supports-Wold-style-definition... yes
checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes
checking if gcc -std=gnu99 supports-Wunused... yes
checking if gcc -std=gnu99 supports-Wuninitialized... yes
checking if gcc -std=gnu99 supports-Wshadow... yes
checking if gcc -std=gnu99 supports-Wcast-qual... yes
checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes
checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes
checking if gcc -std=gnu99 supports-Wredundant-decls... yes
checking if gcc -std=gnu99 supports-Werror=implicit... yes
checking if gcc -std=gnu99 supports-Werror=nonnull... yes
checking if gcc -std=gnu99 supports-Werror=init-self... yes
checking if gcc -std=gnu99 supports-Werror=main... yes
checking if gcc -std=gnu99 supports-Werror=missing-braces... yes
checking if gcc -std=gnu99 supports-Werror=sequence-point... yes
checking if gcc -std=gnu99 supports-Werror=return-type... yes
checking if gcc -std=gnu99 supports-Werror=trigraphs... yes
checking if gcc -std=gnu99 supports-Werror=array-bounds... yes
checking if gcc -std=gnu99 supports-Werror=write-strings... yes
checking if gcc -std=gnu99 supports-Werror=address... yes
checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes
checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes
checking if gcc -std=gnu99 supports-pedantic... yes
checking if gcc -std=gnu99 supports-Werror... yes
checking if gcc -std=gnu99 supports-Werror=attributes... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating gestureproto.pc
config.status: executing depfiles commands
+ CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CFLAGS
+ CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__'
+ export CXXFLAGS
+ FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed  -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian  -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -I%_fmoddir'
+ export FFLAGS
+ autoreconf -v --install --force
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force 
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
autoreconf: configure.ac: not using Autoheader
autoreconf: running: automake --add-missing --copy --force-missing
autoreconf: Leaving directory `.'
+ ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --libdir=/usr/share --without-xmlto
configure: WARNING: unrecognized options: --disable-static, --without-xmlto
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for style of include used by make... GNU
checking for armv7l-unknown-linux-gnueabi-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... none
checking for gcc option to accept ISO C99... -std=gnu99
checking how to run the C preprocessor... gcc -std=gnu99 -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether __clang__ is declared... no
checking whether __INTEL_COMPILER is declared... no
checking whether __SUNPRO_C is declared... no
checking for armv7l-unknown-linux-gnueabi-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... armv7l-unknown-linux-gnueabi
checking host system type... armv7l-unknown-linux-gnueabi
checking for a sed that does not truncate output... /bin/sed
checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no
checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no
checking if gcc -std=gnu99 supports-Wall... yes
checking if gcc -std=gnu99 supports-Wpointer-arith... yes
checking if gcc -std=gnu99 supports-Wmissing-declarations... yes
checking if gcc -std=gnu99 supports-Wformat=2... yes
checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes
checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes
checking if gcc -std=gnu99 supports-Wnested-externs... yes
checking if gcc -std=gnu99 supports-Wbad-function-cast... yes
checking if gcc -std=gnu99 supports-Wold-style-definition... yes
checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes
checking if gcc -std=gnu99 supports-Wunused... yes
checking if gcc -std=gnu99 supports-Wuninitialized... yes
checking if gcc -std=gnu99 supports-Wshadow... yes
checking if gcc -std=gnu99 supports-Wcast-qual... yes
checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes
checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes
checking if gcc -std=gnu99 supports-Wredundant-decls... yes
checking if gcc -std=gnu99 supports-Werror=implicit... yes
checking if gcc -std=gnu99 supports-Werror=nonnull... yes
checking if gcc -std=gnu99 supports-Werror=init-self... yes
checking if gcc -std=gnu99 supports-Werror=main... yes
checking if gcc -std=gnu99 supports-Werror=missing-braces... yes
checking if gcc -std=gnu99 supports-Werror=sequence-point... yes
checking if gcc -std=gnu99 supports-Werror=return-type... yes
checking if gcc -std=gnu99 supports-Werror=trigraphs... yes
checking if gcc -std=gnu99 supports-Werror=array-bounds... yes
checking if gcc -std=gnu99 supports-Werror=write-strings... yes
checking if gcc -std=gnu99 supports-Werror=address... yes
checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes
checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes
checking if gcc -std=gnu99 supports-pedantic... yes
checking if gcc -std=gnu99 supports-Werror... yes
checking if gcc -std=gnu99 supports-Werror=attributes... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating gestureproto.pc
config.status: executing depfiles commands
configure: WARNING: unrecognized options: --disable-static, --without-xmlto
+ make -j4
make: Nothing to be done for `all'.
+ exit 0
Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.e4JmcY
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xorg-x11-proto-gesture-0.1.0
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
+ mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
+ /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm install
make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-proto-gesture-0.1.0'
make[1]: Nothing to be done for `install-exec-am'.
test -z "/usr/include/X11/extensions" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/include/X11/extensions"
 /usr/bin/install -c -m 644 gestureconst.h gestureproto.h '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/include/X11/extensions'
test -z "/usr/share/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/pkgconfig"
 /usr/bin/install -c -m 644 gestureproto.pc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/pkgconfig'
make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-proto-gesture-0.1.0'
+ rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/info/dir
+ find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm -regex '.*\.la$'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm -regex '.*\.a$'
+ xargs rm -f --
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/info
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/doc
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/doc/xorg-x11-proto-gesture
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/gtk-doc
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm/usr/share/man
+ find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm -regex '.*/man/man./.*.[0-9]'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm -regex '.*/man/../man./.*.[0-9]'
+ xargs rm -f --
+ find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm -regex '.*/man/man./.*.[0-9]pm'
+ xargs rm -f --
+ /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-proto-gesture-0.1.0
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm//brp-compress
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-python-bytecompile
+ /usr/lib/rpm/brp-python-hardlink
+ /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
Processing files: xorg-x11-proto-gesture-0.1.0-slp.1.1.armv7l
Provides: gestureproto pkgconfig(gestureproto) = 0.1.0
Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
Requires: /usr/bin/pkg-config
Processing files: xorg-x11-proto-gesture-debuginfo-0.1.0-slp.1.1.armv7l
Processing files: xorg-x11-proto-gesture-debugsource-0.1.0-slp.1.1.armv7l
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-proto-gesture-0.1.0-slp.1.1.src.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-gesture-0.1.0-slp.1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-gesture-debuginfo-0.1.0-slp.1.1.armv7l.rpm
Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-gesture-debugsource-0.1.0-slp.1.1.armv7l.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.CyPQH2
+ umask 022
+ cd /home/abuild/rpmbuild/BUILD
+ cd xorg-x11-proto-gesture-0.1.0
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
+ rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-gesture-0.1.0-slp.1.1.arm
+ exit 0
... checking for files with abuild user/group
... creating baselibs

w29 finished "build xorg-x11-proto-gesture.spec" at Thu Sep 20 20:57:16 UTC 2012.


Retried build at Fri Sep 21 08:21:42 2012 returned same result, skipped
Retried build at Fri Sep 21 08:24:27 2012 returned same result, skipped
Retried build at Fri Sep 21 08:27:07 2012 returned same result, skipped