[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw17 started "build _service:gbs:perl-PerlIO-gzip.spec" at Thu Oct 29 23:50:37 UTC 2020. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen:6.0:Base' repository 'standard' arch 'armv7l' srcmd5 '7963e27f352d5e4a4d089ca6988ad10f' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libblkid... [ 1s] [12/40] preinstalling libbz2... [ 1s] [13/40] preinstalling libcap... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libelf... [ 7s] [30/40] preinstalling libmount... [ 7s] [31/40] preinstalling smack... [ 7s] [32/40] preinstalling bzip2... [ 7s] [33/40] preinstalling libmagic... [ 7s] [34/40] preinstalling libxml2... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] [1/94] installing libmagic-data-5.37-3.50 [ 8s] [2/94] installing setup-0.9-4.4 [ 8s] warning: /etc/profile created as /etc/profile.rpmnew [ 8s] [3/94] installing filesystem-3.1-3.1 [ 8s] [4/94] installing glibc-2.30-5.4 [ 9s] [5/94] installing libatomic-9.2.0-6.3 [ 9s] [6/94] installing libgcc-9.2.0-6.3 [ 9s] [7/94] installing bash-3.2.57-4.2 [ 9s] [8/94] installing cpio-2.11-3.1 [ 9s] [9/94] installing diffutils-3.3-3.1 [ 9s] [10/94] installing findutils-4.3.8-3.55 [ 9s] [11/94] installing gdbm-1.8.3-3.64 [ 10s] [12/94] installing hostname-3.23-3.1 [ 10s] [13/94] installing libattr-2.4.47-3.62 [ 10s] [14/94] installing libblkid-2.34-5.1 [ 10s] [15/94] installing libbz2-1.0.8-4.10 [ 11s] [16/94] installing libcap-2.24-3.61 [ 11s] [17/94] installing libext2fs-1.43.4-3.1 [ 11s] [18/94] installing libfreebl3-3.34.1-3.39 [ 11s] [19/94] installing libgfortran-9.2.0-6.3 [ 12s] [20/94] installing libgomp-9.2.0-6.3 [ 12s] [21/94] installing libitm-9.2.0-6.3 [ 12s] [22/94] installing libltdl-2.4.2-3.34 [ 13s] [23/94] installing liblua-5.1.5-3.66 [ 13s] [24/94] installing liblzma-5.2.4-3.50 [ 13s] [25/94] installing libpcre-8.43-3.10 [ 14s] [26/94] installing libpopt-1.16-3.62 [ 14s] [27/94] installing libsmack-1.3.1-3.59 [ 15s] [28/94] installing libsmartcols-2.34-5.1 [ 15s] [29/94] installing libsqlite-3.31.1-3.49 [ 15s] [30/94] installing libstdc++-9.2.0-6.3 [ 15s] [31/94] installing libuuid-2.34-5.1 [ 16s] [32/94] installing m4-1.4.17-2.1 [ 16s] [33/94] installing net-tools-2.0_20121208git-3.1 [ 16s] [34/94] installing nspr-4.12-3.60 [ 16s] [35/94] installing patch-2.7-3.55 [ 16s] [36/94] installing pkg-config-0.28-3.52 [ 16s] [37/94] installing sed-4.1c-3.1 [ 16s] [38/94] installing update-alternatives-1.18.15-2.1 [ 16s] [39/94] installing which-2.20-3.1 [ 16s] [40/94] installing zlib-1.2.11-3.55 [ 17s] [41/94] installing build-compare-2015.04.28-3.18 [ 17s] [42/94] installing libstdc++-devel-9.2.0-6.3 [ 17s] [43/94] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 18s] [44/94] installing terminfo-base-full-6.1_20191207-3.43 [ 18s] [45/94] installing cpp-9.2.0-6.3 [ 19s] [46/94] installing gcc-c++-9.2.0-6.3 [ 20s] [47/94] installing binutils-2.33.1-7.1 [ 20s] [48/94] installing coreutils-6.9-4.8 [ 20s] [49/94] installing gawk-3.1.5-4.1 [ 20s] [50/94] installing grep-2.5.2-3.1 [ 20s] [51/94] installing libacl-2.2.52-3.59 [ 21s] [52/94] installing libcc1-9.2.0-6.3 [ 22s] [53/94] installing libelf-0.178-3.10 [ 22s] [54/94] installing libmount-2.34-5.1 [ 23s] [55/94] installing libubsan-9.2.0-6.3 [ 24s] [56/94] installing make-4.0-2.10 [ 24s] [57/94] installing nss-certs-3.34.1-3.39 [ 25s] [58/94] installing smack-1.3.1-3.59 [ 25s] [59/94] installing bzip2-1.0.8-4.10 [ 25s] [60/94] installing libfdisk-2.34-5.1 [ 26s] [61/94] installing libmagic-5.37-3.50 [ 26s] [62/94] installing libxml2-2.9.10-3.48 [ 27s] [63/94] installing perl-5.30.0-2.28 [ 33s] [64/94] installing xz-5.2.4-3.50 [ 34s] [65/94] installing build-mkbaselibs-20120927-3.1 [ 34s] [66/94] installing linux-glibc-devel-3.10-3.62 [ 36s] [67/94] installing autoconf-2.69-3.33 [ 37s] [68/94] installing file-5.37-3.50 [ 38s] [69/94] installing glibc-locale-2.30-5.4 [ 40s] [70/94] installing tar-1.17-2.1 [ 41s] [71/94] installing gzip-1.3.12-3.61 [ 41s] [72/94] installing libncurses6-6.1_20191207-3.43 [ 42s] [73/94] installing pam-1.1.6-3.1 [ 44s] [74/94] installing tzdata-2019c-2.1 [ 45s] [75/94] installing libdw-0.178-3.10 [ 46s] [76/94] installing gcc-9.2.0-6.3 [ 48s] [77/94] installing libncurses-6.1_20191207-3.43 [ 49s] [78/94] installing glibc-devel-2.30-5.4 [ 49s] [79/94] installing qemu-accel-x86_64-armv7l-0.4-2.1 [ 68s] [80/94] installing automake-1.15.1-3.39 [ 69s] [81/94] installing less-466-3.1 [ 69s] [82/94] installing libreadline-5.2-2.58 [ 70s] [83/94] installing procps-ng-3.3.15-2.1 [ 71s] [84/94] installing libasm-0.178-3.10 [ 72s] [85/94] installing build-20120927-3.1 [ 72s] [86/94] installing zlib-devel-1.2.11-3.55 [ 72s] [87/94] installing libtool-2.4.2-3.34 [ 72s] [88/94] installing elfutils-0.178-3.10 [ 73s] [89/94] installing util-linux-2.34-5.1 [ 73s] [90/94] installing util-linux-su-2.34-5.1 [ 74s] [91/94] installing nss-3.34.1-3.39 [ 75s] [92/94] installing libsoftokn3-3.34.1-3.39 [ 76s] [93/94] installing rpm-4.11.0.1-2.30 [ 77s] [94/94] installing rpm-build-4.11.0.1-2.30 [ 78s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 78s] now finalizing build dir... [ 80s] Running build time source services... [ 82s] build target is armv7l-tizen-linux [ 82s] ----------------------------------------------------------------- [ 82s] I have the following modifications for perl-PerlIO-gzip.spec: [ 82s] 4c4 [ 82s] < Release: 1 [ 82s] --- [ 82s] > Release: 2.2 [ 82s] ----------------------------------------------------------------- [ 82s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 82s] ----------------------------------------------------------------- [ 82s] ----------------------------------------------------------------- [ 83s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.0:Base/standard/7963e27f352d5e4a4d089ca6988ad10f-perl-PerlIO-gzip' -ba /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 92s] Building target platforms: armv7l-tizen-linux [ 92s] Building for target armv7l-tizen-linux [ 92s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EzJBoN [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + rm -rf perl-PerlIO-gzip-0.18 [ 92s] + /bin/tar -xf - [ 92s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.18.tar.gz [ 92s] + STATUS=0 [ 92s] + '[' 0 -ne 0 ']' [ 92s] + cd perl-PerlIO-gzip-0.18 [ 92s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 92s] + echo 'Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):' [ 92s] Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch): [ 92s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Bump-to-perl-PerlIO-gzip-0.18.patch [ 92s] + /bin/patch -p1 --fuzz=2 [ 92s] patching file Makefile.PL [ 92s] + exit 0 [ 92s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.3MZAfJ [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd perl-PerlIO-gzip-0.18 [ 92s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CFLAGS [ 92s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CXXFLAGS [ 92s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 92s] + export FFLAGS [ 92s] + LDFLAGS= [ 92s] + export LDFLAGS [ 92s] + perl Makefile.PL [ 98s] Checking if your kit is complete... [ 98s] Looks good [ 100s] Generating a Unix-style Makefile [ 100s] Writing Makefile for PerlIO::gzip [ 100s] Writing MYMETA.yml and MYMETA.json [ 100s] + make [ 113s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 113s] Running Mkbootstrap for gzip () [ 114s] chmod 644 "gzip.bs" [ 114s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 115s] "/usr/bin/perl" "/usr/lib/perl5/5.30.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.30.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 118s] mv gzip.xsc gzip.c [ 118s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -fPIC "-I/usr/lib/perl5/5.30.0/armv7l-linux-thread-multi/CORE" gzip.c [ 119s] gzip.xs: In function 'PerlIOGzip_popped': [ 119s] gzip.xs:870:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'IV' {aka 'long int'} [-Wformat=] [ 119s] 870 | PerlIO_debug("PerlIOGzip_popped code=%d\n", code); [ 119s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ [ 119s] | | [ 119s] | IV {aka long int} [ 119s] In file included from /usr/lib/perl5/5.30.0/armv7l-linux-thread-multi/CORE/perl.h:5359, [ 119s] from gzip.xs:13: [ 119s] gzip.xs: In function 'PerlIOGzip_getarg': [ 119s] /usr/lib/perl5/5.30.0/armv7l-linux-thread-multi/CORE/embed.h:541:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 119s] 541 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 119s] | ^~~~~~~~~~~~ [ 119s] gzip.xs:675:24: note: 'mode' was declared here [ 119s] 675 | register const char *mode; [ 119s] | ^~~~ [ 119s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 119s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 119s] -lz \ [ 119s] [ 119s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 123s] Manifying 1 pod document [ 123s] + exit 0 [ 123s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ArNGiK [ 123s] + umask 022 [ 123s] + cd /home/abuild/rpmbuild/BUILD [ 123s] + cd perl-PerlIO-gzip-0.18 [ 123s] + LANG=C [ 123s] + export LANG [ 123s] + unset DISPLAY [ 123s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 123s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 123s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 123s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm install_vendor [ 124s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 127s] Manifying 1 pod document [ 129s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 129s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 129s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 129s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/man/man3/PerlIO::gzip.3 [ 129s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/5.30.0/armv7l-linux-thread-multi/perllocal.pod [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/info [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/doc/packages [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/doc/perl-PerlIO-gzip [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/doc/perl-PerlIO-gzip-0.18 [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/gtk-doc [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/doc [ 130s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/man [ 130s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm -regex '.*/man/man./.*.[0-9]' [ 130s] + xargs rm -f -- [ 130s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm -regex '.*/man/../man./.*.[0-9]' [ 130s] + xargs rm -f -- [ 130s] + xargs rm -f -- [ 130s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 130s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto [ 130s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 130s] + xargs -0 -r rm [ 130s] + '[' armv7l == noarch ']' [ 130s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/5.30.0/armv7l-linux-thread-multi/perllocal.pod [ 130s] + FILES=perl-PerlIO-gzip.files [ 130s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0 -maxdepth 1 -type f [ 130s] + RES= [ 130s] + '[' -n '' ']' [ 130s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ [ 130s] ++ sort [ 130s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ -type d [ 130s] + for dir in '`find ${base_dir} -type d | sort`' [ 130s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 130s] + continue [ 130s] + for dir in '`find ${base_dir} -type d | sort`' [ 130s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 130s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi [ 130s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 130s] + el=armv7l-linux-thread-multi [ 130s] + all_dir=(${all_dir[@]} $el) [ 130s] + for dir in '`find ${base_dir} -type d | sort`' [ 130s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 130s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 130s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/PerlIO [ 131s] + el=armv7l-linux-thread-multi/PerlIO [ 131s] + all_dir=(${all_dir[@]} $el) [ 131s] + for dir in '`find ${base_dir} -type d | sort`' [ 131s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 131s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto [ 131s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 131s] + el=armv7l-linux-thread-multi/auto [ 131s] + all_dir=(${all_dir[@]} $el) [ 131s] + for dir in '`find ${base_dir} -type d | sort`' [ 131s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 131s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 131s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO [ 131s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 131s] + all_dir=(${all_dir[@]} $el) [ 131s] + for dir in '`find ${base_dir} -type d | sort`' [ 131s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 131s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 131s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 131s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 131s] + all_dir=(${all_dir[@]} $el) [ 131s] + for i in '${all_dir[@]}' [ 131s] + '[' armv7l-linux-thread-multi = auto ']' [ 131s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto ']' [ 131s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi ']' [ 131s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 131s] + RES= [ 131s] + '[' -n '' ']' [ 131s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi [ 131s] + /bin/cat [ 131s] + for i in '${all_dir[@]}' [ 131s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 131s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto ']' [ 131s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/PerlIO ']' [ 131s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 131s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 131s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 131s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/PerlIO [ 131s] + /bin/cat [ 131s] + for file in '$RES' [ 131s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 131s] + fgen_file /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 131s] + /bin/cat [ 131s] + for i in '${all_dir[@]}' [ 131s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 131s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto ']' [ 131s] + continue [ 131s] + for i in '${all_dir[@]}' [ 131s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 131s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto ']' [ 131s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 131s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 131s] + RES= [ 131s] + '[' -n '' ']' [ 131s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO [ 131s] + /bin/cat [ 131s] + for i in '${all_dir[@]}' [ 131s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 131s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto ']' [ 131s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 131s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 131s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 131s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 131s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 131s] + /bin/cat [ 131s] + for file in '$RES' [ 131s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 131s] + fgen_file /usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 131s] + /bin/cat [ 131s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/share/man ']' [ 131s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 131s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/bin ']' [ 131s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 131s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm/usr/lib/perl5/vendor_perl/5.30.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 132s] 158 blocks [ 132s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debuginfo.manifest [ 133s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debugsource.manifest [ 133s] + /usr/lib/rpm/check-buildroot [ 133s] + /usr/lib/rpm//brp-compress [ 133s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 133s] + /usr/lib/rpm/brp-python-hardlink [ 133s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 133s] Processing files: perl-PerlIO-gzip-0.18-2.2.armv7l [ 133s] Provides: gzip.so perl(PerlIO::gzip) = 0.18 perl-PerlIO-gzip = 0.18-2.2 perl-PerlIO-gzip(armv7l-32) = 0.18-2.2 [ 133s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 133s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 133s] Processing files: perl-PerlIO-gzip-debugsource-0.18-2.2.armv7l [ 133s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 133s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 133s] [ 133s] Provides: perl-PerlIO-gzip-debugsource = 0.18-2.2 perl-PerlIO-gzip-debugsource(armv7l-32) = 0.18-2.2 [ 133s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 133s] Processing files: perl-PerlIO-gzip-debuginfo-0.18-2.2.armv7l [ 133s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 133s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 133s] [ 133s] Provides: perl-PerlIO-gzip-debuginfo = 0.18-2.2 perl-PerlIO-gzip-debuginfo(armv7l-32) = 0.18-2.2 [ 133s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 133s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 134s] warning: Could not canonicalize hostname: obsnw17 [ 134s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-2.2.src.rpm [ 134s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-0.18-2.2.armv7l.rpm [ 134s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debugsource-0.18-2.2.armv7l.rpm [ 134s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debuginfo-0.18-2.2.armv7l.rpm [ 134s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qNDlfN [ 134s] + umask 022 [ 134s] + cd /home/abuild/rpmbuild/BUILD [ 134s] + cd perl-PerlIO-gzip-0.18 [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.arm [ 134s] + exit 0 [ 135s] ... checking for files with abuild user/group [ 135s] ... creating baselibs [ 137s] [ 137s] obsnw17 finished "build perl-PerlIO-gzip.spec" at Thu Oct 29 23:52:54 UTC 2020. [ 137s] Retried build at Fri Oct 30 09:40:47 2020 returned same result, skipped