[ 0s] Memory limit set to 82441108KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_6 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obsnw16 started "build _service:gbs:perl-PerlIO-gzip.spec" at Thu Oct 29 20:19:23 UTC 2020. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen:6.0:Base' repository 'standard' arch 'i586' srcmd5 '7963e27f352d5e4a4d089ca6988ad10f' [ 0s] [ 0s] processing recipe /var/cache/build/root_6/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_6/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_6/.build.rpmlist /var/cache/build/root_6/.build-srcdir/_service:gbs:perl-PerlIO-gzip.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/35] preinstalling libmagic-data... [ 2s] [2/35] preinstalling libncurses... [ 2s] [3/35] preinstalling setup... [ 2s] [4/35] preinstalling filesystem... [ 2s] [5/35] preinstalling glibc... [ 2s] [6/35] preinstalling bash... [ 2s] [7/35] preinstalling diffutils... [ 2s] [8/35] preinstalling grep... [ 2s] [9/35] preinstalling libattr... [ 2s] [10/35] preinstalling libbz2... [ 2s] [11/35] preinstalling libcap... [ 2s] [12/35] preinstalling libfreebl3... [ 2s] [13/35] preinstalling libgcc... [ 2s] [14/35] preinstalling liblua... [ 2s] [15/35] preinstalling liblzma... [ 2s] [16/35] preinstalling libpopt... [ 2s] [17/35] preinstalling libreadline... [ 2s] [18/35] preinstalling libsmack... [ 2s] [19/35] preinstalling libsqlite... [ 2s] [20/35] preinstalling nspr... [ 2s] [21/35] preinstalling sed... [ 3s] [22/35] preinstalling zlib... [ 3s] [23/35] preinstalling coreutils... [ 3s] [24/35] preinstalling libacl... [ 3s] [25/35] preinstalling libelf... [ 3s] [26/35] preinstalling smack... [ 3s] [27/35] preinstalling bzip2... [ 3s] [28/35] preinstalling libmagic... [ 3s] [29/35] preinstalling libxml2... [ 3s] [30/35] preinstalling util-linux... [ 3s] [31/35] preinstalling tar... [ 3s] [32/35] preinstalling util-linux-su... [ 3s] [33/35] preinstalling nss... [ 3s] [34/35] preinstalling libsoftokn3... [ 3s] [35/35] preinstalling rpm... [ 3s] [ 3s] running setup postinstall script [ 3s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 3s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 3s] initializing rpm db... [ 3s] reordering...cycle: libsoftokn3 -> nss [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 4s] [1/93] installing libmagic-data-5.37-2.68 [ 4s] [2/93] installing setup-0.9-2.1 [ 4s] [3/93] installing filesystem-3.1-2.1 [ 4s] [4/93] installing glibc-2.30-2.15 [ 4s] [5/93] installing bash-3.2.57-2.1 [ 4s] [6/93] installing cpio-2.11-2.1 [ 4s] [7/93] installing diffutils-3.3-2.1 [ 4s] [8/93] installing findutils-4.3.8-2.70 [ 4s] [9/93] installing gdbm-1.8.3-2.76 [ 5s] [10/93] installing hostname-3.23-2.1 [ 5s] [11/93] installing libatomic-9.2.0-2.11 [ 5s] [12/93] installing libattr-2.4.47-2.75 [ 5s] [13/93] installing libblkid-2.34-2.1 [ 6s] [14/93] installing libbz2-1.0.8-2.68 [ 6s] [15/93] installing libcap-2.24-2.74 [ 6s] [16/93] installing libext2fs-1.43.4-2.1 [ 7s] [17/93] installing libfreebl3-3.34.1-2.35 [ 7s] [18/93] installing libgcc-9.2.0-2.11 [ 7s] [19/93] installing libgomp-9.2.0-2.11 [ 8s] [20/93] installing libitm-9.2.0-2.11 [ 8s] [21/93] installing libltdl-2.4.2-2.56 [ 8s] [22/93] installing liblua-5.1.5-2.21 [ 9s] [23/93] installing liblzma-5.2.4-2.49 [ 9s] [24/93] installing libpcre-8.43-2.7 [ 9s] [25/93] installing libpopt-1.16-2.75 [ 10s] [26/93] installing libquadmath-9.2.0-2.11 [ 10s] [27/93] installing libsmack-1.3.1-2.71 [ 10s] [28/93] installing libsmartcols-2.34-2.1 [ 11s] [29/93] installing libsqlite-3.31.1-2.54 [ 11s] [30/93] installing libuuid-2.34-2.1 [ 12s] [31/93] installing m4-1.4.17-2.1 [ 12s] [32/93] installing net-tools-2.0_20121208git-2.1 [ 12s] [33/93] installing nspr-4.12-2.70 [ 13s] [34/93] installing patch-2.7-2.74 [ 13s] [35/93] installing pkg-config-0.28-2.66 [ 13s] [36/93] installing sed-4.1c-2.1 [ 13s] [37/93] installing update-alternatives-1.18.15-2.1 [ 13s] [38/93] installing which-2.20-2.1 [ 13s] [39/93] installing zlib-1.2.11-2.74 [ 13s] [40/93] installing build-compare-2015.04.28-2.13 [ 13s] [41/93] installing terminfo-base-full-6.1_20191207-2.49 [ 13s] [42/93] installing coreutils-6.9-2.6 [ 14s] [43/93] installing cpp-9.2.0-2.11 [ 15s] [44/93] installing gawk-3.1.5-2.1 [ 15s] [45/93] installing gcc-c++-9.2.0-2.11 [ 16s] [46/93] installing grep-2.5.2-2.1 [ 16s] [47/93] installing libacl-2.2.52-2.75 [ 16s] [48/93] installing libelf-0.178-2.5 [ 16s] [49/93] installing libmount-2.34-2.1 [ 17s] [50/93] installing libstdc++-9.2.0-2.11 [ 17s] [51/93] installing make-4.0-2.5 [ 17s] [52/93] installing nss-certs-3.34.1-2.35 [ 18s] [53/93] installing smack-1.3.1-2.71 [ 18s] [54/93] installing bzip2-1.0.8-2.68 [ 18s] [55/93] installing libfdisk-2.34-2.1 [ 18s] [56/93] installing libgfortran-9.2.0-2.11 [ 18s] [57/93] installing libmagic-5.37-2.68 [ 19s] [58/93] installing libxml2-2.9.10-2.19 [ 19s] [59/93] installing perl-5.30.0-2.36 [ 21s] [60/93] installing xz-5.2.4-2.49 [ 21s] [61/93] installing build-mkbaselibs-20120927-2.1 [ 21s] [62/93] installing libstdc++-devel-9.2.0-2.11 [ 22s] [63/93] installing file-5.37-2.68 [ 22s] [64/93] installing linux-glibc-devel-3.10-2.74 [ 22s] [65/93] installing tar-1.17-2.1 [ 22s] [66/93] installing autoconf-2.69-2.31 [ 23s] [67/93] installing binutils-2.33.1-2.22 [ 24s] [68/93] installing glibc-locale-2.30-2.15 [ 24s] [69/93] installing gzip-1.3.12-2.74 [ 24s] [70/93] installing libcc1-9.2.0-2.11 [ 25s] [71/93] installing libubsan-9.2.0-2.11 [ 25s] [72/93] installing pam-1.1.6-2.1 [ 25s] [73/93] installing libncurses6-6.1_20191207-2.49 [ 26s] [74/93] installing tzdata-2019c-2.1 [ 26s] [75/93] installing libdw-0.178-2.5 [ 27s] [76/93] installing libncurses-6.1_20191207-2.49 [ 27s] [77/93] installing glibc-devel-2.30-2.15 [ 27s] [78/93] installing less-466-2.1 [ 27s] [79/93] installing libreadline-5.2-2.14 [ 27s] [80/93] installing procps-ng-3.3.15-2.1 [ 28s] [81/93] installing automake-1.15.1-2.38 [ 28s] [82/93] installing libasm-0.178-2.5 [ 28s] [83/93] installing build-20120927-2.1 [ 28s] [84/93] installing gcc-9.2.0-2.11 [ 29s] [85/93] installing zlib-devel-1.2.11-2.74 [ 29s] [86/93] installing libtool-2.4.2-2.56 [ 29s] [87/93] installing elfutils-0.178-2.5 [ 29s] [88/93] installing util-linux-2.34-2.1 [ 29s] [89/93] installing util-linux-su-2.34-2.1 [ 29s] [90/93] installing nss-3.34.1-2.35 [ 30s] [91/93] installing libsoftokn3-3.34.1-2.35 [ 30s] [92/93] installing rpm-4.11.0.1-2.35 [ 31s] [93/93] installing rpm-build-4.11.0.1-2.35 [ 31s] removing nis flags from /var/cache/build/root_6/etc/nsswitch.conf... [ 31s] now finalizing build dir... [ 31s] Running build time source services... [ 31s] build target is i686-tizen-linux [ 31s] ----------------------------------------------------------------- [ 31s] I have the following modifications for perl-PerlIO-gzip.spec: [ 31s] 4c4 [ 31s] < Release: 1 [ 31s] --- [ 31s] > Release: 2.2 [ 31s] ----------------------------------------------------------------- [ 31s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 31s] ----------------------------------------------------------------- [ 31s] ----------------------------------------------------------------- [ 31s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.0:Base/standard/7963e27f352d5e4a4d089ca6988ad10f-perl-PerlIO-gzip' -ba /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 31s] Building target platforms: i686-tizen-linux [ 31s] Building for target i686-tizen-linux [ 31s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8OOm8i [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + rm -rf perl-PerlIO-gzip-0.18 [ 31s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.18.tar.gz [ 31s] + /bin/tar -xf - [ 31s] + STATUS=0 [ 31s] + '[' 0 -ne 0 ']' [ 31s] + cd perl-PerlIO-gzip-0.18 [ 31s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 31s] + echo 'Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):' [ 31s] Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch): [ 31s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Bump-to-perl-PerlIO-gzip-0.18.patch [ 31s] + /bin/patch -p1 --fuzz=2 [ 31s] patching file Makefile.PL [ 31s] + exit 0 [ 31s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.QRep8h [ 31s] + umask 022 [ 31s] + cd /home/abuild/rpmbuild/BUILD [ 31s] + cd perl-PerlIO-gzip-0.18 [ 31s] + [[ i386 == \a\a\r\c\h\6\4 ]] [ 31s] + LANG=C [ 31s] + export LANG [ 31s] + unset DISPLAY [ 31s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 31s] + export CFLAGS [ 31s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 31s] + export CXXFLAGS [ 31s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 31s] + export FFLAGS [ 31s] + LDFLAGS= [ 31s] + export LDFLAGS [ 31s] + perl Makefile.PL [ 31s] Checking if your kit is complete... [ 31s] Looks good [ 31s] Generating a Unix-style Makefile [ 31s] Writing Makefile for PerlIO::gzip [ 31s] Writing MYMETA.yml and MYMETA.json [ 31s] + make [ 32s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 32s] Running Mkbootstrap for gzip () [ 32s] chmod 644 "gzip.bs" [ 32s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 32s] "/usr/bin/perl" "/usr/lib/perl5/5.30.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.30.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 32s] mv gzip.xsc gzip.c [ 32s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -Wall -pipe -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -fPIC "-I/usr/lib/perl5/5.30.0/i686-linux-thread-multi/CORE" gzip.c [ 32s] gzip.xs: In function 'PerlIOGzip_popped': [ 32s] gzip.xs:870:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'IV' {aka 'long int'} [-Wformat=] [ 32s] 870 | PerlIO_debug("PerlIOGzip_popped code=%d\n", code); [ 32s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ [ 32s] | | [ 32s] | IV {aka long int} [ 32s] In file included from /usr/lib/perl5/5.30.0/i686-linux-thread-multi/CORE/perl.h:5359, [ 32s] from gzip.xs:13: [ 32s] gzip.xs: In function 'PerlIOGzip_getarg': [ 32s] /usr/lib/perl5/5.30.0/i686-linux-thread-multi/CORE/embed.h:541:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 32s] 541 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 32s] | ^~~~~~~~~~~~ [ 32s] gzip.xs:675:24: note: 'mode' was declared here [ 32s] 675 | register const char *mode; [ 32s] | ^~~~ [ 32s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 32s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 32s] -lz \ [ 32s] [ 32s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 32s] Manifying 1 pod document [ 32s] + exit 0 [ 32s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JDH8Pk [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd perl-PerlIO-gzip-0.18 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 32s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 32s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 install_vendor [ 32s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 32s] Manifying 1 pod document [ 32s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 32s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 32s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/PerlIO/gzip.pm [ 32s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/man/man3/PerlIO::gzip.3 [ 32s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/5.30.0/i686-linux-thread-multi/perllocal.pod [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/info [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/doc/packages [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/doc/perl-PerlIO-gzip [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/doc/perl-PerlIO-gzip-0.18 [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/gtk-doc [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/doc [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/man [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 -regex '.*/man/man./.*.[0-9]' [ 32s] + xargs rm -f -- [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 -regex '.*/man/../man./.*.[0-9]' [ 32s] + xargs rm -f -- [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 -regex '.*/man/man./.*.[0-9]pm' [ 32s] + xargs rm -f -- [ 32s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto -name .packlist -print0 [ 32s] + xargs -0 -r rm [ 32s] + '[' i686 == noarch ']' [ 32s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/5.30.0/i686-linux-thread-multi/perllocal.pod [ 32s] + FILES=perl-PerlIO-gzip.files [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0 -maxdepth 1 -type f [ 32s] + RES= [ 32s] + '[' -n '' ']' [ 32s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ -type d [ 32s] ++ sort [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 32s] + continue [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 32s] + el=i686-linux-thread-multi [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/PerlIO [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 32s] + el=i686-linux-thread-multi/PerlIO [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 32s] + el=i686-linux-thread-multi/auto [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 32s] + el=i686-linux-thread-multi/auto/PerlIO [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for dir in '`find ${base_dir} -type d | sort`' [ 32s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ ']' [ 32s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip [ 32s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/ '{print $2}' [ 32s] + el=i686-linux-thread-multi/auto/PerlIO/gzip [ 32s] + all_dir=(${all_dir[@]} $el) [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' i686-linux-thread-multi = auto ']' [ 32s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi ']' [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi -maxdepth 1 -type f [ 32s] + RES= [ 32s] + '[' -n '' ']' [ 32s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi [ 32s] + /bin/cat [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' i686-linux-thread-multi/PerlIO = auto ']' [ 32s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/PerlIO ']' [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 32s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/PerlIO/gzip.pm [ 32s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/PerlIO/gzip.pm ']' [ 32s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/PerlIO [ 32s] + /bin/cat [ 32s] + for file in '$RES' [ 32s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/PerlIO/gzip.pm [ 32s] + fgen_file /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/PerlIO/gzip.pm [ 32s] + /bin/cat [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' i686-linux-thread-multi/auto = auto ']' [ 32s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto ']' [ 32s] + continue [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' i686-linux-thread-multi/auto/PerlIO = auto ']' [ 32s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO ']' [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 32s] + RES= [ 32s] + '[' -n '' ']' [ 32s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO [ 32s] + /bin/cat [ 32s] + for i in '${all_dir[@]}' [ 32s] + '[' i686-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 32s] + '[' /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO/gzip ']' [ 32s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 32s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 32s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 32s] + fgen_dir /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip [ 32s] + /bin/cat [ 32s] + for file in '$RES' [ 32s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0//i686-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 32s] + fgen_file /usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 32s] + /bin/cat [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/share/man ']' [ 32s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 32s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/bin ']' [ 32s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386/usr/lib/perl5/vendor_perl/5.30.0/i686-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 32s] 158 blocks [ 32s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debuginfo.manifest [ 32s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debugsource.manifest [ 32s] + /usr/lib/rpm/check-buildroot [ 32s] + /usr/lib/rpm//brp-compress [ 32s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 32s] + /usr/lib/rpm/brp-python-hardlink [ 32s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 32s] Processing files: perl-PerlIO-gzip-0.18-2.2.i686 [ 32s] Provides: gzip.so perl(PerlIO::gzip) = 0.18 perl-PerlIO-gzip = 0.18-2.2 perl-PerlIO-gzip(x86-32) = 0.18-2.2 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.4) libz.so.1 [ 32s] Processing files: perl-PerlIO-gzip-debugsource-0.18-2.2.i686 [ 32s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 32s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 32s] [ 32s] Provides: perl-PerlIO-gzip-debugsource = 0.18-2.2 perl-PerlIO-gzip-debugsource(x86-32) = 0.18-2.2 [ 32s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 32s] Processing files: perl-PerlIO-gzip-debuginfo-0.18-2.2.i686 [ 32s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 32s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 32s] [ 32s] Provides: perl-PerlIO-gzip-debuginfo = 0.18-2.2 perl-PerlIO-gzip-debuginfo(x86-32) = 0.18-2.2 [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 33s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-2.2.src.rpm [ 33s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/perl-PerlIO-gzip-0.18-2.2.i686.rpm [ 33s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/perl-PerlIO-gzip-debugsource-0.18-2.2.i686.rpm [ 33s] XZ: Adjusted the number of threads from 36 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/perl-PerlIO-gzip-debuginfo-0.18-2.2.i686.rpm [ 33s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.EP4FUh [ 33s] + umask 022 [ 33s] + cd /home/abuild/rpmbuild/BUILD [ 33s] + cd perl-PerlIO-gzip-0.18 [ 33s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 33s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-2.2.i386 [ 33s] + exit 0 [ 33s] ... checking for files with abuild user/group [ 33s] ... creating baselibs [ 33s] [ 33s] obsnw16 finished "build perl-PerlIO-gzip.spec" at Thu Oct 29 20:19:56 UTC 2020. [ 33s]