[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] [ 0s] [ 0s] obspw30 started "build _service:gbs:ise-engine-hangul.spec" at Wed Dec 9 21:11:38 UTC 2020. [ 0s] [ 0s] Building ise-engine-hangul for project 'Tizen:6.0:Unified' repository 'emulator' arch 'x86_64' srcmd5 'b253c9d7facf3ebbe1215e992478ac22' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:ise-engine-hangul.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:ise-engine-hangul.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:ise-engine-hangul.spec build rpmlint-Factory ... [ 12s] copying qemu [ 12s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 12s] [ 12s] cycle: libsoftokn3 -> nss [ 12s] breaking dependency nss -> libsoftokn3 [ 12s] [1/35] preinstalling libmagic-data... [ 12s] [2/35] preinstalling libncurses... [ 12s] [3/35] preinstalling setup... [ 12s] [4/35] preinstalling filesystem... [ 12s] [5/35] preinstalling glibc... [ 12s] [6/35] preinstalling bash... [ 12s] [7/35] preinstalling diffutils... [ 12s] [8/35] preinstalling grep... [ 12s] [9/35] preinstalling libattr... [ 13s] [10/35] preinstalling libbz2... [ 13s] [11/35] preinstalling libcap... [ 13s] [12/35] preinstalling libfreebl3... [ 13s] [13/35] preinstalling libgcc... [ 13s] [14/35] preinstalling liblua... [ 13s] [15/35] preinstalling liblzma... [ 13s] [16/35] preinstalling libpopt... [ 13s] [17/35] preinstalling libreadline... [ 13s] [18/35] preinstalling libsmack... [ 13s] [19/35] preinstalling libsqlite... [ 13s] [20/35] preinstalling nspr... [ 13s] [21/35] preinstalling sed... [ 13s] [22/35] preinstalling zlib... [ 13s] [23/35] preinstalling coreutils... [ 13s] [24/35] preinstalling libacl... [ 13s] [25/35] preinstalling libelf... [ 13s] [26/35] preinstalling smack... [ 13s] [27/35] preinstalling bzip2... [ 13s] [28/35] preinstalling libmagic... [ 13s] [29/35] preinstalling libxml2... [ 13s] [30/35] preinstalling util-linux... [ 13s] [31/35] preinstalling tar... [ 13s] [32/35] preinstalling util-linux-su... [ 13s] [33/35] preinstalling nss... [ 13s] [34/35] preinstalling libsoftokn3... [ 13s] [35/35] preinstalling rpm... [ 13s] [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 14s] reordering...cycle: gio-branding-upstream -> libgio [ 14s] breaking dependency libgio -> gio-branding-upstream [ 14s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 14s] breaking dependency pkgmgr-info-parser -> pkgmgr-info [ 14s] cycle: ecore-core -> efl [ 14s] breaking dependency efl -> ecore-core [ 14s] cycle: efl -> ecore-con [ 14s] breaking dependency ecore-con -> efl [ 14s] cycle: ecore-core -> efl -> ecore-con [ 14s] breaking dependency ecore-con -> ecore-core [ 14s] cycle: efl -> ecore-con -> eet [ 14s] breaking dependency ecore-con -> eet [ 14s] cycle: efl -> ecore-con -> eina [ 14s] breaking dependency efl -> ecore-con [ 14s] cycle: efl -> eina [ 14s] breaking dependency efl -> eina [ 14s] cycle: efl -> eo [ 14s] breaking dependency eo -> efl [ 14s] cycle: efl -> eo -> eina [ 14s] breaking dependency eo -> eina [ 14s] cycle: ecore-evas -> ecore-input-evas -> evas [ 14s] breaking dependency ecore-evas -> ecore-input-evas [ 14s] cycle: ecore-evas -> evas [ 14s] breaking dependency evas -> ecore-evas [ 14s] cycle: libsecurity-manager-client -> security-manager [ 14s] breaking dependency security-manager -> libsecurity-manager-client [ 14s] cycle: libsecurity-manager-client -> security-manager -> security-license-manager [ 14s] breaking dependency security-manager -> security-license-manager [ 14s] cycle: security-manager -> security-manager-policy [ 14s] breaking dependency security-manager -> security-manager-policy [ 14s] cycle: isf -> org.tizen.isf-kbd-mode-changer [ 14s] breaking dependency isf -> org.tizen.isf-kbd-mode-changer [ 14s] cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 14s] [1/239] installing boost-license-1.71.0-2.1 [ 14s] [2/239] installing default-ac-domains-0.1-3.1 [ 14s] [3/239] installing dlog-config-persistent-logs-6.0.16-5.1 [ 14s] [4/239] installing libmagic-data-5.37-2.69 [ 14s] [5/239] installing setup-0.9-2.2 [ 14s] [6/239] installing filesystem-3.1-2.1 [ 14s] [7/239] installing glibc-2.30-2.16 [ 15s] [8/239] installing bash-3.2.57-2.1 [ 15s] [9/239] installing capi-base-common-0.4.59-2.1 [ 15s] [10/239] installing cpio-2.11-2.1 [ 15s] [11/239] installing diffutils-3.3-2.1 [ 15s] [12/239] installing findutils-4.3.8-2.71 [ 15s] [13/239] installing fribidi-1.0.8-2.1 [ 16s] [14/239] installing gdbm-1.8.3-2.77 [ 16s] [15/239] installing giflib-5.1.9-2.1 [ 16s] [16/239] installing hostname-3.23-2.1 [ 16s] [17/239] installing iniparser-4.1-2.1 [ 16s] [18/239] installing libatomic-9.2.0-2.12 [ 17s] [19/239] installing libattr-2.4.47-2.76 [ 17s] [20/239] installing libblkid-2.34-3.2 [ 17s] [21/239] installing libbz2-1.0.8-2.69 [ 18s] [22/239] installing libcap-2.24-2.75 [ 18s] [23/239] installing libdrm-2.4.100-2.1 [ 18s] [24/239] installing libexpat-2.2.9-2.1 [ 19s] [25/239] installing libext2fs-1.43.4-2.1 [ 19s] [26/239] installing libffi-3.1-2.75 [ 19s] [27/239] installing libfreebl3-3.34.1-2.36 [ 20s] [28/239] installing libgcc-9.2.0-2.12 [ 20s] [29/239] installing libgomp-9.2.0-2.12 [ 20s] [30/239] installing libhyphen-2.8.8-2.1 [ 21s] [31/239] installing libitm-9.2.0-2.12 [ 21s] [32/239] installing libjpeg-8.2.2-2.2 [ 22s] [33/239] installing libltdl-2.4.2-2.57 [ 22s] [34/239] installing liblua-5.1.5-2.22 [ 22s] [35/239] installing liblzma-5.2.4-2.50 [ 23s] [36/239] installing libopenssl11-1.1.1g-2.43 [ 23s] [37/239] installing libpcre-8.43-2.8 [ 23s] [38/239] installing libpopt-1.16-2.76 [ 24s] [39/239] installing libpython3_7m1_0-3.7.3-2.38 [ 24s] [40/239] installing libquadmath-9.2.0-2.12 [ 24s] [41/239] installing libsmack-1.3.1-2.72 [ 25s] [42/239] installing libsmartcols-2.34-3.2 [ 25s] [43/239] installing libsqlite-3.31.1-2.55 [ 25s] [44/239] installing libuuid-2.34-3.2 [ 26s] [45/239] installing libwayland-egl-1.18.0-3.1 [ 26s] [46/239] installing libwebp-1.1.0-2.1 [ 26s] [47/239] installing libxkbcommon-0.10.0-2.1 [ 27s] [48/239] installing m4-1.4.17-2.1 [ 27s] [49/239] installing net-tools-2.0_20121208git-2.1 [ 27s] [50/239] installing nspr-4.12-2.71 [ 27s] [51/239] installing patch-2.7-2.75 [ 27s] [52/239] installing pixman-0.38.4-2.1 [ 27s] [53/239] installing pkg-config-0.28-2.67 [ 27s] [54/239] installing sed-4.1c-2.1 [ 27s] [55/239] installing update-alternatives-1.18.15-2.1 [ 27s] [56/239] installing which-2.20-2.1 [ 27s] [57/239] installing xdgmime-0.0.14-2.1 [ 28s] [58/239] installing zlib-1.2.11-2.75 [ 28s] [59/239] installing shadow-utils-4.1.4.2-2.8 [ 28s] [60/239] installing build-compare-2015.04.28-2.14 [ 28s] [61/239] installing sensord-dummy-4.0.54-2.1 [ 28s] [62/239] installing terminfo-base-full-6.1_20191207-2.50 [ 29s] [63/239] installing coreutils-6.9-2.7 [ 29s] [64/239] installing cpp-9.2.0-2.12 [ 30s] [65/239] installing gawk-3.1.5-2.1 [ 30s] [66/239] installing gcc-c++-9.2.0-2.12 [ 31s] [67/239] installing grep-2.5.2-2.1 [ 31s] [68/239] installing libacl-2.2.52-2.76 [ 31s] [69/239] installing libblkid-devel-2.34-3.2 [ 31s] [70/239] installing libcap-tools-2.24-2.75 [ 31s] [71/239] installing libelf-0.178-2.6 [ 31s] [72/239] installing libffi-devel-3.1-2.75 [ 31s] [73/239] installing libglib-2.62.3-2.8 [ 32s] [74/239] installing libhangul-0.1.0-2.1 [ 32s] [75/239] installing libmount-2.34-3.2 [ 32s] [76/239] installing libpcreposix-8.43-2.8 [ 33s] [77/239] installing libpng-1.6.37-2.1 [ 33s] [78/239] installing libstdc++-9.2.0-2.12 [ 33s] [79/239] installing make-4.0-2.6 [ 34s] [80/239] installing minizip-1.2.11-2.75 [ 34s] [81/239] installing nss-certs-3.34.1-2.36 [ 34s] [82/239] installing smack-1.3.1-2.72 [ 34s] [83/239] installing sqlite-3.31.1-2.55 [ 34s] [84/239] installing bzip2-1.0.8-2.69 [ 34s] [85/239] installing libfdisk-2.34-3.2 [ 35s] [86/239] installing libgfortran-9.2.0-2.12 [ 35s] [87/239] installing libmagic-5.37-2.69 [ 35s] [88/239] installing libxml2-2.9.10-2.20 [ 36s] [89/239] installing perl-5.30.0-2.37 [ 38s] [90/239] installing xz-5.2.4-2.50 [ 38s] [91/239] installing libkmod-27-2.1 [ 38s] [92/239] installing python3-base-3.7.3-2.38 [ 39s] [93/239] installing build-mkbaselibs-20120927-2.1 [ 39s] [94/239] installing libstdc++-devel-9.2.0-2.12 [ 39s] [95/239] installing file-5.37-2.69 [ 39s] [96/239] installing libgmodule-2.62.3-2.8 [ 40s] [97/239] installing libgthread-2.62.3-2.8 [ 40s] [98/239] installing libhangul-devel-0.1.0-2.1 [ 40s] [99/239] installing linux-glibc-devel-3.10-2.75 [ 40s] [100/239] installing lottie-player-0.2.0-2.1 [ 40s] [101/239] installing tar-1.17-2.1 [ 41s] [102/239] installing autoconf-2.69-2.32 [ 41s] [103/239] installing binutils-2.33.1-2.23 [ 41s] [104/239] installing glibc-locale-2.30-2.16 [ 42s] [105/239] installing gzip-1.3.12-2.75 [ 42s] [106/239] installing libcc1-9.2.0-2.12 [ 42s] [107/239] installing libfreetype-2.10.1-2.1 [ 43s] [108/239] installing libgobject-2.62.3-2.8 [ 43s] [109/239] installing libmount-devel-2.34-3.2 [ 43s] [110/239] installing libnss-security-manager-1.6.14-3.5 [ 43s] [111/239] installing libubsan-9.2.0-2.12 [ 43s] [112/239] installing pam-1.1.6-2.1 [ 44s] [113/239] installing tizen-platform-config-5.0-2.1 [ 44s] [114/239] installing boost-filesystem-1.71.0-2.1 [ 44s] [115/239] installing boost-program-options-1.71.0-2.1 [ 45s] [116/239] installing dlog-common-6.0.16-5.1 [ 45s] [117/239] installing gettext-runtime-0.19.8.1-2.9 [ 45s] [118/239] installing libicu-65.1-2.2 [ 47s] [119/239] installing libncurses6-6.1_20191207-2.50 [ 47s] [120/239] installing libpcrecpp-8.43-2.8 [ 47s] [121/239] installing ttrace-1.0.3-3.3 [ 48s] [122/239] installing tzdata-2019c-2.1 [ 48s] [123/239] installing cynara-db-migration-0.16.0-3.1 [ 48s] [124/239] installing libdw-0.178-2.6 [ 48s] [125/239] installing security-config-1.0-4.1 [ 50s] groupadd: group 'dbus' already exists [ 50s] groupadd: group 'priv_appdebugging' already exists [ 50s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 50s] [126/239] installing libtiff-4.1.0-2.1 [ 50s] [127/239] installing shared-mime-info-1.7-2.1 [ 53s] [128/239] installing libncurses-6.1_20191207-2.50 [ 53s] [129/239] installing dlog-logger-6.0.16-5.1 [ 53s] [130/239] installing glibc-devel-2.30-2.16 [ 53s] [131/239] installing less-466-2.1 [ 53s] [132/239] installing libreadline-5.2-2.15 [ 53s] [133/239] installing libtzplatform-config-5.0-2.1 [ 53s] [134/239] installing procps-ng-3.3.15-2.1 [ 54s] [135/239] installing automake-1.15.1-2.39 [ 54s] [136/239] installing libasm-0.178-2.6 [ 54s] [137/239] installing boost-regex-1.71.0-2.1 [ 54s] [138/239] installing build-20120927-2.1 [ 55s] [139/239] installing libsystemd-244-6.1 [ 55s] [140/239] installing gettext-tools-0.19.8.1-2.9 [ 55s] [141/239] installing libharfbuzz-2.6.4-2.1 [ 56s] [142/239] installing pcre-devel-8.43-2.8 [ 56s] [143/239] installing fontconfig-2.13.1-2.1 [ 56s] [144/239] installing gcc-9.2.0-2.12 [ 57s] [145/239] installing dbus-libs-1.12.20-3.3 [ 57s] [146/239] installing tizen-platform-config-tools-5.0-2.1 [ 57s] [147/239] installing zlib-devel-1.2.11-2.75 [ 57s] [148/239] installing libtool-2.4.2-2.57 [ 58s] [149/239] installing elfutils-0.178-2.6 [ 58s] [150/239] installing python3-3.7.3-2.2 [ 58s] [151/239] installing libdlog-6.0.16-5.1 [ 58s] [152/239] installing util-linux-2.34-3.2 [ 58s] [153/239] installing systemd-244-6.1 [ 59s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 59s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 59s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 59s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 59s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 59s] [154/239] installing libwayland-egl-tizen-1.0.1-6.1 [ 59s] [155/239] installing libwayland-client-1.18.0-3.1 [ 60s] [156/239] installing libwayland-server-1.18.0-3.1 [ 60s] [157/239] installing util-linux-su-2.34-3.2 [ 60s] [158/239] installing libcynara-commons-0.16.0-3.1 [ 61s] [159/239] installing capi-system-info-0.5.2-3.1 [ 61s] Running capi-system-info %posttrans script [ 61s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 61s] iniparser: cannot open /etc/info.ini [ 61s] [160/239] installing libwayland-extension-client-1.3.14-4.1 [ 61s] [161/239] installing pkgmgr-0.12.8-3.1 [ 62s] Running pkgmgr %posttrans script [ 62s] /var/tmp/rpm-tmp.9AoVIr: line 4: pkg_initdb: command not found [ 62s] /var/tmp/rpm-tmp.9AoVIr: line 5: install_preload_pkg: command not found [ 62s] /var/tmp/rpm-tmp.9AoVIr: line 12: pkgcmd: command not found [ 62s] /var/tmp/rpm-tmp.9AoVIr: line 14: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 62s] [162/239] installing libcynara-agent-0.16.0-3.1 [ 62s] [163/239] installing libcynara-client-0.16.0-3.1 [ 63s] [164/239] installing libcynara-creds-commons-0.16.0-3.1 [ 63s] [165/239] installing libcynara-session-0.16.0-3.1 [ 63s] [166/239] installing libwayland-cursor-1.18.0-3.1 [ 63s] [167/239] installing libcynara-admin-0.16.0-3.1 [ 64s] [168/239] installing cynara-0.16.0-3.1 [ 64s] Running in chroot, ignoring request: daemon-reload [ 64s] Running in chroot, ignoring request: restart [ 64s] [169/239] installing libtbm-3.3.14-3.1 [ 65s] [170/239] installing libwayland-tbm-client-0.8.3-2.1 [ 65s] [171/239] installing cyad-0.16.0-3.1 [ 65s] [172/239] installing libcynara-creds-socket-0.16.0-3.1 [ 65s] [173/239] installing libwayland-tbm-server-0.8.3-2.1 [ 66s] [174/239] installing libtdm-2.12.0-3.1 [ 66s] [175/239] installing libtdm-client-2.12.0-3.1 [ 66s] [176/239] installing libtpl-egl-1.7.17-6.1 [ 67s] [177/239] installing coregl-0.2.0-2.6 [ 67s] [178/239] installing eo-1.25.0-7.3 [ 67s] [179/239] installing nss-3.34.1-2.36 [ 68s] [180/239] installing libgio-2.62.3-2.8 [ 68s] [181/239] installing gio-branding-upstream-2.62.3-2.8 [ 68s] [182/239] installing libjson-glib-1.4.4-2.1 [ 68s] [183/239] installing libsoftokn3-3.34.1-2.36 [ 69s] [184/239] installing glib2-tools-2.62.3-2.8 [ 69s] [185/239] installing efl-1.25.0-7.3 [ 69s] [186/239] installing pkgmgr-info-parser-0.18.4-3.1 [ 69s] [187/239] installing rpm-4.11.0.1-3.1 [ 69s] [188/239] installing buxton2-1.7.2-5.1 [ 70s] Running buxton2 %posttrans script [ 70s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 70s] /etc/buxton2/*: No such file or directory [ 70s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 70s] /var/lib/buxton2/*: No such file or directory [ 70s] [189/239] installing eina-1.25.0-7.3 [ 70s] [190/239] installing vconf-compat-1.7.2-5.1 [ 71s] [191/239] installing bundle-0.5.5-3.1 [ 71s] [192/239] installing rpm-build-4.11.0.1-3.1 [ 71s] [193/239] installing glib2-devel-2.62.3-2.8 [ 71s] [194/239] installing embryo-1.25.0-7.3 [ 71s] [195/239] installing emile-1.25.0-7.3 [ 72s] [196/239] installing ecore-core-1.25.0-7.3 [ 72s] [197/239] installing libstorage-1.0.0-3.1 [ 72s] [198/239] installing pkgmgr-info-0.18.4-3.1 [ 72s] [199/239] installing ecore-imf-1.25.0-7.3 [ 72s] [200/239] installing ecore-audio-1.25.0-7.3 [ 72s] [201/239] installing eet-1.25.0-7.3 [ 73s] [202/239] installing eldbus-1.25.0-7.3 [ 73s] [203/239] installing ecore-con-1.25.0-7.3 [ 73s] [204/239] installing pkgmgr-installer-0.12.8-3.1 [ 73s] [205/239] installing pkgmgr-client-0.12.8-3.1 [ 74s] [206/239] installing security-privilege-manager-1.2.9-2.9 [ 74s] mdm blacklist exist [ 74s] Check inserted data [ 74s] DPM blacklist... [ 74s] [ 74s] MDM blacklist... [ 74s] [207/239] installing ector-1.25.0-7.3 [ 74s] [208/239] installing ecore-file-1.25.0-7.3 [ 74s] [209/239] installing ecore-ipc-1.25.0-7.3 [ 75s] [210/239] installing capi-appfw-package-manager-0.8.7-2.1 [ 75s] [211/239] installing aul-0.28.4-5.5 [ 75s] [212/239] installing security-manager-1.6.14-3.5 [ 76s] Running in chroot, ignoring request: daemon-reload [ 76s] Running in chroot, ignoring request: start [ 76s] [213/239] installing libsecurity-manager-client-1.6.14-3.5 [ 76s] [214/239] installing eeze-1.25.0-7.3 [ 76s] [215/239] installing security-manager-policy-1.6.14-3.5 [ 78s] Running in chroot, ignoring request: stop [ 78s] Running in chroot, ignoring request: start [ 78s] [216/239] installing efreet-1.25.0-7.3 [ 78s] [217/239] installing app-core-common-1.14.7-2.1 [ 79s] [218/239] installing ecore-input-1.25.0-7.3 [ 79s] [219/239] installing capi-appfw-app-common-0.8.6-2.1 [ 79s] [220/239] installing capi-appfw-app-control-0.14.1-3.1 [ 79s] [221/239] installing eio-1.25.0-7.3 [ 79s] [222/239] installing security-license-manager-1.6.14-3.5 [ 80s] Running in chroot, ignoring request: daemon-reload [ 80s] Running in chroot, ignoring request: start [ 80s] [223/239] installing ecore-fb-1.25.0-7.3 [ 80s] [224/239] installing appcore-agent-1.2.12-2.1 [ 80s] [225/239] installing ecore-wl2-1.25.0-7.3 [ 80s] [226/239] installing notification-0.5.85-5.1 [ 81s] [227/239] installing evas-1.25.0-7.3 [ 81s] [228/239] installing ecore-imf-evas-1.25.0-7.3 [ 81s] [229/239] installing ecore-input-evas-1.25.0-7.3 [ 81s] [230/239] installing ecore-evas-1.25.0-7.3 [ 81s] [231/239] installing edje-1.25.0-7.3 [ 82s] [232/239] installing emotion-1.25.0-7.3 [ 82s] [233/239] installing ethumb-1.25.0-7.3 [ 82s] [234/239] installing elementary-1.25.0-7.3 [ 83s] [235/239] installing capi-ui-efl-util-0.7.6-2.1 [ 83s] [236/239] installing efl-extension-0.1.7-2.2 [ 83s] [237/239] installing isf-6.0.38-6.1 [ 84s] [238/239] installing isf-devel-6.0.38-6.1 [ 84s] [239/239] installing org.tizen.isf-kbd-mode-changer-6.0.38-6.1 [ 84s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 84s] now finalizing build dir... [ 84s] Running build time source services... [ 85s] ----------------------------------------------------------------- [ 85s] I have the following modifications for ise-engine-hangul.spec: [ 85s] 5c5 [ 85s] < Release: 1 [ 85s] --- [ 85s] > Release: 4.1 [ 85s] 49a50 [ 85s] > %changelog [ 85s] ----------------------------------------------------------------- [ 85s] ----- building ise-engine-hangul.spec (user abuild) [ 85s] ----------------------------------------------------------------- [ 85s] ----------------------------------------------------------------- [ 85s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.0:Unified/emulator/b253c9d7facf3ebbe1215e992478ac22-ise-engine-hangul' -ba /home/abuild/rpmbuild/SOURCES/ise-engine-hangul.spec [ 85s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5w9Wy9 [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + rm -rf ise-engine-hangul-1.0.12 [ 85s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-hangul-1.0.12.tar.gz [ 85s] + /bin/tar -xf - [ 85s] + STATUS=0 [ 85s] + '[' 0 -ne 0 ']' [ 85s] + cd ise-engine-hangul-1.0.12 [ 85s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 85s] + exit 0 [ 85s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.N3kyNb [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd ise-engine-hangul-1.0.12 [ 85s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + LDFLAGS= [ 85s] + export LDFLAGS [ 85s] + export 'CFLAGS+= -fvisibility=hidden ' [ 85s] + CFLAGS+=' -fvisibility=hidden ' [ 85s] + export 'CXXFLAGS+= -fvisibility=hidden ' [ 85s] + CXXFLAGS+=' -fvisibility=hidden ' [ 85s] + export 'CPPFLAGS+= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 85s] + CPPFLAGS+=' -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' [ 85s] + ./bootstrap [ 85s] + touch ChangeLog [ 85s] + autopoint --force [ 85s] Copying file ABOUT-NLS [ 85s] Copying file config.rpath [ 86s] Creating directory m4 [ 86s] Copying file m4/codeset.m4 [ 86s] Copying file m4/fcntl-o.m4 [ 86s] Copying file m4/gettext.m4 [ 86s] Copying file m4/glibc2.m4 [ 86s] Copying file m4/glibc21.m4 [ 86s] Copying file m4/iconv.m4 [ 86s] Copying file m4/intdiv0.m4 [ 86s] Copying file m4/intl.m4 [ 86s] Copying file m4/intldir.m4 [ 86s] Copying file m4/intlmacosx.m4 [ 86s] Copying file m4/intmax.m4 [ 86s] Copying file m4/inttypes-pri.m4 [ 86s] Copying file m4/inttypes_h.m4 [ 86s] Copying file m4/lcmessage.m4 [ 86s] Copying file m4/lib-ld.m4 [ 86s] Copying file m4/lib-link.m4 [ 86s] Copying file m4/lib-prefix.m4 [ 86s] Copying file m4/lock.m4 [ 86s] Copying file m4/longlong.m4 [ 86s] Copying file m4/nls.m4 [ 86s] Copying file m4/po.m4 [ 86s] Copying file m4/printf-posix.m4 [ 86s] Copying file m4/progtest.m4 [ 86s] Copying file m4/size_max.m4 [ 86s] Copying file m4/stdint_h.m4 [ 86s] Copying file m4/threadlib.m4 [ 86s] Copying file m4/uintmax_t.m4 [ 86s] Copying file m4/visibility.m4 [ 86s] Copying file m4/wchar_t.m4 [ 86s] Copying file m4/wint_t.m4 [ 86s] Copying file m4/xsize.m4 [ 86s] Copying file po/Makefile.in.in [ 86s] Copying file po/Rules-quot [ 86s] + libtoolize --copy --automake [ 86s] + aclocal -I ./m4 [ 87s] + autoheader [ 88s] + automake --add-missing --copy --include-deps [ 88s] configure.ac:42: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. [ 88s] configure.ac:42: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, [ 88s] configure.ac:42: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. [ 88s] configure.ac:29: installing './compile' [ 89s] + autoconf [ 89s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + ./configure --build=x86_64-tizen-linux-gnu --host=x86_64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 89s] checking for a BSD-compatible install... /bin/install -c [ 89s] checking whether build environment is sane... yes [ 89s] /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/missing: Unknown `--is-lightweight' option [ 89s] Try `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/missing --help' for more information [ 89s] configure: WARNING: 'missing' script is too old or missing [ 89s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 89s] checking for gawk... gawk [ 89s] checking whether make sets $(MAKE)... yes [ 89s] checking whether make supports nested variables... yes [ 89s] checking whether make supports nested variables... (cached) yes [ 89s] checking build system type... x86_64-tizen-linux-gnu [ 89s] checking host system type... x86_64-tizen-linux-gnu [ 89s] checking how to print strings... printf [ 89s] checking for style of include used by make... GNU [ 89s] checking for x86_64-tizen-linux-gnu-gcc... x86_64-tizen-linux-gnu-gcc [ 89s] checking whether the C compiler works... yes [ 89s] checking for C compiler default output file name... a.out [ 89s] checking for suffix of executables... [ 89s] checking whether we are cross compiling... no [ 89s] checking for suffix of object files... o [ 89s] checking whether we are using the GNU C compiler... yes [ 89s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... yes [ 89s] checking for x86_64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 89s] checking whether x86_64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 89s] checking dependency style of x86_64-tizen-linux-gnu-gcc... gcc3 [ 89s] checking for a sed that does not truncate output... /bin/sed [ 89s] checking for grep that handles long lines and -e... /bin/grep [ 89s] checking for egrep... /bin/grep -E [ 89s] checking for fgrep... /bin/grep -F [ 89s] checking for ld used by x86_64-tizen-linux-gnu-gcc... /usr/x86_64-tizen-linux-gnu/bin/ld [ 89s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 89s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 89s] checking the name lister (/bin/nm -B) interface... BSD nm [ 89s] checking whether ln -s works... yes [ 89s] checking the maximum length of command line arguments... 1572864 [ 89s] checking whether the shell understands some XSI constructs... yes [ 89s] checking whether the shell understands "+="... yes [ 89s] checking how to convert x86_64-tizen-linux-gnu file names to x86_64-tizen-linux-gnu format... func_convert_file_noop [ 89s] checking how to convert x86_64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 89s] checking for /usr/x86_64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 89s] checking for x86_64-tizen-linux-gnu-objdump... no [ 89s] checking for objdump... objdump [ 89s] checking how to recognize dependent libraries... pass_all [ 89s] checking for x86_64-tizen-linux-gnu-dlltool... no [ 89s] checking for dlltool... no [ 89s] checking how to associate runtime and link libraries... printf %s\n [ 89s] checking for x86_64-tizen-linux-gnu-ar... no [ 89s] checking for ar... ar [ 89s] checking for archiver @FILE support... @ [ 89s] checking for x86_64-tizen-linux-gnu-strip... no [ 89s] checking for strip... strip [ 89s] checking for x86_64-tizen-linux-gnu-ranlib... no [ 89s] checking for ranlib... ranlib [ 89s] checking command to parse /bin/nm -B output from x86_64-tizen-linux-gnu-gcc object... ok [ 89s] checking for sysroot... no [ 89s] checking for x86_64-tizen-linux-gnu-mt... no [ 89s] checking for mt... no [ 89s] checking if : is a manifest tool... no [ 89s] checking how to run the C preprocessor... x86_64-tizen-linux-gnu-gcc -E [ 90s] checking for ANSI C header files... yes [ 90s] checking for sys/types.h... yes [ 90s] checking for sys/stat.h... yes [ 90s] checking for stdlib.h... yes [ 90s] checking for string.h... yes [ 90s] checking for memory.h... yes [ 90s] checking for strings.h... yes [ 90s] checking for inttypes.h... yes [ 90s] checking for stdint.h... yes [ 90s] checking for unistd.h... yes [ 90s] checking for dlfcn.h... yes [ 90s] checking for objdir... .libs [ 90s] checking if x86_64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 90s] checking for x86_64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 90s] checking if x86_64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 90s] checking if x86_64-tizen-linux-gnu-gcc static flag -static works... no [ 90s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 90s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 90s] checking whether the x86_64-tizen-linux-gnu-gcc linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 90s] checking whether -lc should be explicitly linked in... no [ 90s] checking dynamic linker characteristics... GNU/Linux ld.so [ 90s] checking how to hardcode library paths into programs... immediate [ 90s] checking for shl_load... no [ 90s] checking for shl_load in -ldld... no [ 90s] checking for dlopen... no [ 90s] checking for dlopen in -ldl... yes [ 90s] checking whether a program can dlopen itself... yes [ 90s] checking whether a statically linked program can dlopen itself... yes [ 90s] checking whether stripping libraries is possible... yes [ 90s] checking if libtool supports shared libraries... yes [ 90s] checking whether to build shared libraries... yes [ 90s] checking whether to build static libraries... no [ 90s] checking which extension is used for runtime loadable modules... .so [ 90s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 90s] checking for the default library search path... /lib /usr/lib /usr/local/lib64 /usr/local/lib [ 90s] checking for library containing dlopen... -ldl [ 90s] checking for dlerror... yes [ 90s] checking for shl_load... (cached) no [ 90s] checking for shl_load in -ldld... (cached) no [ 90s] checking for dld_link in -ldld... no [ 90s] checking for _ prefix in compiled symbols... no [ 90s] checking whether deplibs are loaded by dlopen... yes [ 90s] checking for argz.h... yes [ 90s] checking for error_t... yes [ 91s] checking for argz_add... yes [ 91s] checking for argz_append... yes [ 91s] checking for argz_count... yes [ 91s] checking for argz_create_sep... yes [ 91s] checking for argz_insert... yes [ 91s] checking for argz_next... yes [ 91s] checking for argz_stringify... yes [ 91s] checking if argz actually works... yes [ 91s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 91s] checking for ltdl.h... yes [ 91s] checking whether lt_dlinterface_register is declared... yes [ 91s] checking for lt_dladvise_preload in -lltdl... yes [ 91s] checking where to find libltdl headers... [ 91s] checking where to find libltdl library... -lltdl [ 91s] checking for unistd.h... (cached) yes [ 91s] checking for dl.h... no [ 91s] checking for sys/dl.h... no [ 91s] checking for dld.h... no [ 91s] checking for mach-o/dyld.h... no [ 91s] checking for dirent.h... yes [ 91s] checking for closedir... yes [ 91s] checking for opendir... yes [ 91s] checking for readdir... yes [ 91s] checking for strlcat... no [ 91s] checking for strlcpy... no [ 91s] checking for x86_64-tizen-linux-gnu-g++... x86_64-tizen-linux-gnu-g++ [ 91s] checking whether we are using the GNU C++ compiler... yes [ 91s] checking whether x86_64-tizen-linux-gnu-g++ accepts -g... yes [ 91s] checking dependency style of x86_64-tizen-linux-gnu-g++... gcc3 [ 91s] checking how to run the C++ preprocessor... x86_64-tizen-linux-gnu-g++ -E [ 92s] checking for ld used by x86_64-tizen-linux-gnu-g++... /usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64 [ 92s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) is GNU ld... yes [ 92s] checking whether the x86_64-tizen-linux-gnu-g++ linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 92s] checking for x86_64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 92s] checking if x86_64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 92s] checking if x86_64-tizen-linux-gnu-g++ static flag -static works... no [ 92s] checking if x86_64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 92s] checking if x86_64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 92s] checking whether the x86_64-tizen-linux-gnu-g++ linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 92s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 92s] checking how to hardcode library paths into programs... immediate [ 92s] checking for x86_64-tizen-linux-gnu-gcc... (cached) x86_64-tizen-linux-gnu-gcc [ 92s] checking whether we are using the GNU C compiler... (cached) yes [ 92s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 92s] checking for x86_64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 92s] checking whether x86_64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 92s] checking dependency style of x86_64-tizen-linux-gnu-gcc... (cached) gcc3 [ 92s] checking for an ANSI C-conforming const... yes [ 92s] checking for size_t... yes [ 92s] checking whether NLS is requested... yes [ 92s] checking for msgfmt... /bin/msgfmt [ 92s] checking for gmsgfmt... /bin/msgfmt [ 92s] checking for xgettext... /bin/xgettext [ 92s] checking for msgmerge... /bin/msgmerge [ 92s] checking for ld used by GCC... /usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64 [ 92s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) is GNU ld... yes [ 92s] checking for shared library run path origin... done [ 92s] checking for CFPreferencesCopyAppValue... no [ 92s] checking for CFLocaleCopyCurrent... no [ 92s] checking for GNU gettext in libc... yes [ 92s] checking whether to use NLS... yes [ 92s] checking where the gettext function comes from... libc [ 92s] checking for x86_64-tizen-linux-gnu-pkg-config... /bin/x86_64-tizen-linux-gnu-pkg-config [ 92s] checking pkg-config is at least version 0.9.0... yes [ 92s] checking for LIBHANGUL... yes [ 92s] checking for SCIM... yes [ 92s] checking for SCIM_GTKUTILS... no [ 92s] checking for ANSI C header files... (cached) yes [ 92s] checking that generated files are newer than configure... done [ 92s] configure: creating ./config.status [ 92s] config.status: creating Makefile [ 92s] config.status: creating po/Makefile.in [ 92s] config.status: creating src/Makefile [ 92s] config.status: creating data/Makefile [ 92s] config.status: creating scim-hangul.spec [ 92s] config.status: creating config.h [ 92s] config.status: executing depfiles commands [ 92s] config.status: executing libtool commands [ 93s] config.status: executing po-directories commands [ 93s] config.status: creating po/POTFILES [ 93s] config.status: setting ALL_LINGUAS in configure.in is obsolete [ 93s] config.status: creating po/Makefile [ 93s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/libltdl) [ 93s] configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr' '--build=x86_64-tizen-linux-gnu' '--host=x86_64-tizen-linux-gnu' '--program-prefix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-static' 'build_alias=x86_64-tizen-linux-gnu' 'host_alias=x86_64-tizen-linux-gnu' 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' 'LDFLAGS=' 'CPPFLAGS= -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\)' 'CXXFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden ' --cache-file=/dev/null --srcdir=. [ 93s] checking for a BSD-compatible install... /bin/install -c [ 94s] checking whether build environment is sane... yes [ 94s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 94s] checking for gawk... gawk [ 94s] checking whether make sets $(MAKE)... yes [ 94s] checking build system type... x86_64-tizen-linux-gnu [ 94s] checking host system type... x86_64-tizen-linux-gnu [ 94s] checking how to print strings... printf [ 94s] checking for style of include used by make... GNU [ 94s] checking for x86_64-tizen-linux-gnu-gcc... x86_64-tizen-linux-gnu-gcc [ 94s] checking whether the C compiler works... yes [ 94s] checking for C compiler default output file name... a.out [ 94s] checking for suffix of executables... [ 94s] checking whether we are cross compiling... no [ 94s] checking for suffix of object files... o [ 94s] checking whether we are using the GNU C compiler... yes [ 94s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... yes [ 94s] checking for x86_64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 94s] checking dependency style of x86_64-tizen-linux-gnu-gcc... gcc3 [ 94s] checking for a sed that does not truncate output... /bin/sed [ 94s] checking for grep that handles long lines and -e... /bin/grep [ 94s] checking for egrep... /bin/grep -E [ 94s] checking for fgrep... /bin/grep -F [ 94s] checking for ld used by x86_64-tizen-linux-gnu-gcc... /usr/x86_64-tizen-linux-gnu/bin/ld [ 94s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 94s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 94s] checking the name lister (/bin/nm -B) interface... BSD nm [ 94s] checking whether ln -s works... yes [ 94s] checking the maximum length of command line arguments... 1572864 [ 94s] checking whether the shell understands some XSI constructs... yes [ 94s] checking whether the shell understands "+="... yes [ 94s] checking how to convert x86_64-tizen-linux-gnu file names to x86_64-tizen-linux-gnu format... func_convert_file_noop [ 94s] checking how to convert x86_64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 94s] checking for /usr/x86_64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 94s] checking for x86_64-tizen-linux-gnu-objdump... no [ 94s] checking for objdump... objdump [ 94s] checking how to recognize dependent libraries... pass_all [ 94s] checking for x86_64-tizen-linux-gnu-dlltool... no [ 94s] checking for dlltool... no [ 94s] checking how to associate runtime and link libraries... printf %s\n [ 94s] checking for x86_64-tizen-linux-gnu-ar... no [ 94s] checking for ar... ar [ 94s] checking for archiver @FILE support... @ [ 94s] checking for x86_64-tizen-linux-gnu-strip... no [ 94s] checking for strip... strip [ 94s] checking for x86_64-tizen-linux-gnu-ranlib... no [ 94s] checking for ranlib... ranlib [ 94s] checking command to parse /bin/nm -B output from x86_64-tizen-linux-gnu-gcc object... ok [ 94s] checking for sysroot... no [ 94s] checking for x86_64-tizen-linux-gnu-mt... no [ 94s] checking for mt... no [ 94s] checking if : is a manifest tool... no [ 94s] checking how to run the C preprocessor... x86_64-tizen-linux-gnu-gcc -E [ 94s] checking for ANSI C header files... yes [ 94s] checking for sys/types.h... yes [ 94s] checking for sys/stat.h... yes [ 94s] checking for stdlib.h... yes [ 94s] checking for string.h... yes [ 94s] checking for memory.h... yes [ 94s] checking for strings.h... yes [ 94s] checking for inttypes.h... yes [ 94s] checking for stdint.h... yes [ 95s] checking for unistd.h... yes [ 95s] checking for dlfcn.h... yes [ 95s] checking for objdir... .libs [ 95s] checking if x86_64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 95s] checking for x86_64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 95s] checking if x86_64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 95s] checking if x86_64-tizen-linux-gnu-gcc static flag -static works... no [ 95s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 95s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 95s] checking whether the x86_64-tizen-linux-gnu-gcc linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 95s] checking whether -lc should be explicitly linked in... no [ 95s] checking dynamic linker characteristics... GNU/Linux ld.so [ 95s] checking how to hardcode library paths into programs... immediate [ 95s] checking for shl_load... no [ 95s] checking for shl_load in -ldld... no [ 95s] checking for dlopen... no [ 95s] checking for dlopen in -ldl... yes [ 95s] checking whether a program can dlopen itself... yes [ 95s] checking whether a statically linked program can dlopen itself... yes [ 95s] checking whether stripping libraries is possible... yes [ 95s] checking if libtool supports shared libraries... yes [ 95s] checking whether to build shared libraries... yes [ 95s] checking whether to build static libraries... no [ 95s] checking which extension is used for runtime loadable modules... .so [ 95s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 95s] checking for the default library search path... /lib /usr/lib /usr/local/lib64 /usr/local/lib [ 95s] checking for library containing dlopen... -ldl [ 95s] checking for dlerror... yes [ 95s] checking for shl_load... (cached) no [ 95s] checking for shl_load in -ldld... (cached) no [ 95s] checking for dld_link in -ldld... no [ 95s] checking for _ prefix in compiled symbols... no [ 95s] checking whether deplibs are loaded by dlopen... yes [ 95s] checking for argz.h... yes [ 95s] checking for error_t... yes [ 95s] checking for argz_add... yes [ 95s] checking for argz_append... yes [ 95s] checking for argz_count... yes [ 95s] checking for argz_create_sep... yes [ 95s] checking for argz_insert... yes [ 95s] checking for argz_next... yes [ 95s] checking for argz_stringify... yes [ 95s] checking if argz actually works... yes [ 95s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 96s] checking for unistd.h... (cached) yes [ 96s] checking for dl.h... no [ 96s] checking for sys/dl.h... no [ 96s] checking for dld.h... no [ 96s] checking for mach-o/dyld.h... no [ 96s] checking for dirent.h... yes [ 96s] checking for closedir... yes [ 96s] checking for opendir... yes [ 96s] checking for readdir... yes [ 96s] checking for strlcat... no [ 96s] checking for strlcpy... no [ 96s] configure: creating ./config.status [ 96s] config.status: creating Makefile [ 96s] config.status: creating config.h [ 96s] config.status: executing depfiles commands [ 96s] config.status: executing libtool commands [ 96s] + make -j8 [ 96s] make all-recursive [ 96s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 96s] Making all in src [ 96s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/src' [ 96s] /bin/sh ../libtool --tag=CXX --mode=compile x86_64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. -DEXPORTED=__attribute__\(\(visibility\(\"default\"\)\)\) -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c -o hangul_la-scim_hangul_imengine.lo `test -f 'scim_hangul_imengine.cpp' || echo './'`scim_hangul_imengine.cpp [ 96s] libtool: compile: x86_64-tizen-linux-gnu-g++ -DHAVE_CONFIG_H -I. -I.. "-DEXPORTED=__attribute__((visibility(\"default\")))" -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c scim_hangul_imengine.cpp -fPIC -DPIC -o .libs/hangul_la-scim_hangul_imengine.o [ 99s] mv -f .deps/hangul_la-scim_hangul_imengine.Tpo .deps/hangul_la-scim_hangul_imengine.Plo [ 99s] /bin/sh ../libtool --tag=CXX --mode=link x86_64-tizen-linux-gnu-g++ -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fvisibility=hidden -avoid-version -rpath /usr/lib64/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -lscim_imengine -lhangul -o hangul.la -rpath /usr/lib64/scim-1.0/1.4.0/IMEngine hangul_la-scim_hangul_imengine.lo -ldl [ 99s] libtool: link: /bin/nm -B .libs/hangul_la-scim_hangul_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' | /bin/sed 's/.* //' | sort | uniq > .libs/hangul.exp [ 99s] libtool: link: /bin/grep -E -e "^[^_].*" ".libs/hangul.exp" > ".libs/hangul.expT" [ 99s] libtool: link: mv -f ".libs/hangul.expT" ".libs/hangul.exp" [ 99s] libtool: link: x86_64-tizen-linux-gnu-g++ -fPIC -DPIC -shared -nostdlib /usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/../../../../lib64/crti.o /usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/crtbeginS.o .libs/hangul_la-scim_hangul_imengine.o -lscim-1.0 -lscim_imengine -lhangul -ldl -L/usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0 -L/usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/../../../../lib64 -L/lib/../lib64 -L/usr/lib/../lib64 -L/usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/../../../../x86_64-tizen-linux-gnu/lib -L/usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/crtendS.o /usr/lib64/gcc/x86_64-tizen-linux-gnu/9.2.0/../../../../lib64/crtn.o -O2 -g2 -Wl,-z -Wl,relro -Wl,--as-needed -m64 -march=nehalem -msse4.2 -mfpmath=sse -g -Wl,-soname -Wl,hangul.so -Wl,-retain-symbols-file -Wl,.libs/hangul.exp -o .libs/hangul.so [ 99s] libtool: link: ( cd ".libs" && rm -f "hangul.la" && ln -s "../hangul.la" "hangul.la" ) [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/src' [ 99s] Making all in data [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/data' [ 99s] make[2]: Nothing to be done for 'all'. [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/data' [ 99s] Making all in po [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/po' [ 99s] test ! -f ./scim-hangul.pot || \ [ 99s] test -z "de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo" || make de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo [ 99s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/po' [ 99s] rm -f ja.gmo && /bin/msgfmt -c --statistics --verbose -o ja.gmo ja.po [ 99s] rm -f nl.gmo && /bin/msgfmt -c --statistics --verbose -o nl.gmo nl.po [ 99s] rm -f de.gmo && /bin/msgfmt -c --statistics --verbose -o de.gmo de.po [ 99s] rm -f fr.gmo && /bin/msgfmt -c --statistics --verbose -o fr.gmo fr.po [ 99s] rm -f ko.gmo && /bin/msgfmt -c --statistics --verbose -o ko.gmo ko.po [ 99s] rm -f pa.gmo && /bin/msgfmt -c --statistics --verbose -o pa.gmo pa.po [ 99s] rm -f zh_CN.gmo && /bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po [ 99s] nl.po: 27 translated messages. [ 99s] ja.po: 9 translated messages, 8 fuzzy translations, 10 untranslated messages. [ 99s] ko.po: 27 translated messages. [ 99s] fr.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 99s] pa.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 99s] de.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 99s] zh_CN.po: 8 translated messages, 9 fuzzy translations, 10 untranslated messages. [ 99s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/po' [ 99s] touch stamp-po [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/po' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] + exit 0 [ 99s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Z8FQua [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd ise-engine-hangul-1.0.12 [ 99s] + LANG=C [ 99s] + export LANG [ 99s] + unset DISPLAY [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 [ 99s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 [ 99s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 [ 99s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 install [ 99s] Making install in src [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/src' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/src' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/lib64/scim-1.0/1.4.0/IMEngine' [ 99s] /bin/sh ../libtool --mode=install /bin/install -c hangul.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/lib64/scim-1.0/1.4.0/IMEngine' [ 99s] libtool: install: /bin/install -c .libs/hangul.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/lib64/scim-1.0/1.4.0/IMEngine/hangul.so [ 99s] libtool: install: /bin/install -c .libs/hangul.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/lib64/scim-1.0/1.4.0/IMEngine/hangul.la [ 99s] libtool: install: warning: remember to run `libtool --finish /usr/lib64/scim-1.0/1.4.0/IMEngine' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/src' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/src' [ 99s] Making install in data [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/data' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/data' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/scim/icons' [ 99s] /bin/install -c -m 644 scim-hangul.png scim-hangul-on.png scim-hangul-off.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/scim/icons' [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/scim/hangul' [ 99s] /bin/install -c -m 644 symbol.txt '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/scim/hangul' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/data' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/data' [ 99s] Making install in po [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/po' [ 99s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/de/LC_MESSAGES/scim-hangul.mo [ 99s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/fr/LC_MESSAGES/scim-hangul.mo [ 99s] installing ja.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/ja/LC_MESSAGES/scim-hangul.mo [ 99s] installing ko.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/ko/LC_MESSAGES/scim-hangul.mo [ 99s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/nl/LC_MESSAGES/scim-hangul.mo [ 99s] installing pa.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/pa/LC_MESSAGES/scim-hangul.mo [ 99s] installing zh_CN.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/locale/zh_CN/LC_MESSAGES/scim-hangul.mo [ 99s] if test "scim-hangul" = "gettext-tools"; then \ [ 99s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/gettext/po; \ [ 99s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 99s] /bin/install -c -m 644 ./$file \ [ 99s] /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/gettext/po/$file; \ [ 99s] done; \ [ 99s] for file in Makevars; do \ [ 99s] rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/gettext/po/$file; \ [ 99s] done; \ [ 99s] else \ [ 99s] : ; \ [ 99s] fi [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/po' [ 99s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] make[2]: Nothing to be done for 'install-exec-am'. [ 99s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/packages' [ 99s] /bin/install -c -m 644 hangul.xml '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/packages' [ 99s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12' [ 99s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/info/dir [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 -regex '.*\.la$' [ 99s] + xargs rm -f -- [ 99s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 -regex '.*\.a$' [ 99s] + xargs rm -f -- [ 99s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12 [ 99s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/lib64/scim-1.0/1.4.0/IMEngine/hangul.so [ 99s] 59 blocks [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/ise-engine-hangul-debuginfo.manifest [ 99s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ise-engine-hangul-1.0.12/ise-engine-hangul-debugsource.manifest [ 99s] + /usr/lib/rpm/check-buildroot [ 99s] + /usr/lib/rpm//brp-compress [ 99s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 99s] + /usr/lib/rpm/brp-python-hardlink [ 99s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 [ 99s] Processing files: ise-engine-hangul-1.0.12-4.1.x86_64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPGFzc2lnbj4KICAgIDxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmlu [ 99s] LyoiIGV4ZWNfbGFiZWw9Im5vbmUiIC8+CjwvYXNzaWduPgo8L21hbmlmZXN0Pgo= [ 99s] [ 99s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.vtXr4b [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd ise-engine-hangul-1.0.12 [ 99s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/licenses/ise-engine-hangul [ 99s] + export LICENSEDIR [ 99s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/licenses/ise-engine-hangul [ 99s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64/usr/share/licenses/ise-engine-hangul [ 99s] + exit 0 [ 99s] Provides: hangul.so()(64bit) ise-engine-hangul = 1.0.12-4.1 ise-engine-hangul(x86-64) = 1.0.12-4.1 [ 99s] Requires(interp): /bin/sh /bin/sh [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires(post): /bin/sh [ 99s] Requires(postun): /bin/sh [ 99s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libdl.so.2()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libhangul.so.1()(64bit) libm.so.6()(64bit) libscim-1.0.so.8()(64bit) libscim_imengine.so.8()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 99s] Processing files: ise-engine-hangul-debugsource-1.0.12-4.1.x86_64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: ise-engine-hangul-debugsource = 1.0.12-4.1 ise-engine-hangul-debugsource(x86-64) = 1.0.12-4.1 [ 99s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 99s] Processing files: ise-engine-hangul-debuginfo-1.0.12-4.1.x86_64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: ise-engine-hangul-debuginfo = 1.0.12-4.1 ise-engine-hangul-debuginfo(x86-64) = 1.0.12-4.1 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 [ 99s] Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.12-4.1.src.rpm [ 99s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/ise-engine-hangul-1.0.12-4.1.x86_64.rpm [ 99s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/ise-engine-hangul-debugsource-1.0.12-4.1.x86_64.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/ise-engine-hangul-debuginfo-1.0.12-4.1.x86_64.rpm [ 100s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.COINRb [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd ise-engine-hangul-1.0.12 [ 100s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-1.0.12-4.1.x86_64 [ 100s] + exit 0 [ 100s] ... checking for files with abuild user/group [ 100s] ... creating baselibs [ 100s] ... comparing built packages with the former built [ 100s] /usr/lib/build/pkg-diff.sh [ 100s] compare /.build.oldpackages/ise-engine-hangul-1.0.11-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-1.0.12-4.1.src.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 100s] comparing rpmtags [ 100s] comparing RELEASE [ 100s] comparing PROVIDES [ 100s] comparing scripts [ 100s] comparing filelist [ 100s] comparing file checksum [ 100s] RPM meta information is identical [ 100s] compare /.build.oldpackages/ise-engine-hangul-1.0.11-3.1.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/ise-engine-hangul-1.0.12-4.1.x86_64.rpm [ 100s] Comparing ise-engine-hangul-1.0.11-3.1.x86_64.rpm to ise-engine-hangul-1.0.12-4.1.x86_64.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 100s] comparing rpmtags [ 100s] --- /tmp/tmp.wfin130391/tmp.dcrL130403 2020-12-09 21:13:18.685551240 +0000 [ 100s] +++ /tmp/tmp.wfin130391/tmp.GlGw130404 2020-12-09 21:13:18.693551065 +0000 [ 100s] @@ -1,4 +1,4 @@ [ 100s] -ise-engine-hangul 1.0.11 (none) [ 100s] +ise-engine-hangul 1.0.12 (none) [ 100s] Hangul Input Method Engine for ISF [ 100s] Hangul Input Method Engine enables isf to input Hangul (Korean) [ 100s] characters from the keyboard using the plugin modules and the data files. [ 100s] @@ -9,4 +9,4 @@ [ 100s] cpio xz 5T [ 100s] [ 100s] 1394020800 Jihoon Kim accepted/tizen/mobile/20140225.022222@7dc35bb - Fixed the bug that exception occurs due to NULL env string [ 100s] -obs://build.tizen.org/Tizen:6.0:Unified/emulator/f5fe59abbc35ea26e872f08423929c98-ise-engine-hangul Tizen:6.0:Unified / emulator [ 100s] +obs://build.tizen.org/Tizen:6.0:Unified/emulator/b253c9d7facf3ebbe1215e992478ac22-ise-engine-hangul Tizen:6.0:Unified / emulator [ 100s] RPM meta information is different [ 100s] compare /.build.oldpackages/ise-engine-hangul-debuginfo-1.0.11-3.1.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/ise-engine-hangul-debuginfo-1.0.12-4.1.x86_64.rpm [ 100s] skipping -debuginfo package [ 100s] compare /.build.oldpackages/ise-engine-hangul-debugsource-1.0.11-3.1.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/ise-engine-hangul-debugsource-1.0.12-4.1.x86_64.rpm [ 100s] Comparing ise-engine-hangul-debugsource-1.0.11-3.1.x86_64.rpm to ise-engine-hangul-debugsource-1.0.12-4.1.x86_64.rpm [ 100s] This is not a prerelease project. Compare the project name. [ 100s] comparing rpmtags [ 100s] --- /tmp/tmp.fFmY130422/tmp.eVQe130434 2020-12-09 21:13:18.773549311 +0000 [ 100s] +++ /tmp/tmp.fFmY130422/tmp.PJTU130435 2020-12-09 21:13:18.781549137 +0000 [ 100s] @@ -1,4 +1,4 @@ [ 100s] -ise-engine-hangul-debugsource 1.0.11 (none) [ 100s] +ise-engine-hangul-debugsource 1.0.12 (none) [ 100s] Debug sources for package ise-engine-hangul [ 100s] This package provides debug sources for package ise-engine-hangul. [ 100s] Debug sources are useful when developing applications that use this [ 100s] @@ -10,4 +10,4 @@ [ 100s] cpio xz 5T [ 100s] [ 100s] 1394020800 Jihoon Kim accepted/tizen/mobile/20140225.022222@7dc35bb - Fixed the bug that exception occurs due to NULL env string [ 100s] -obs://build.tizen.org/Tizen:6.0:Unified/emulator/f5fe59abbc35ea26e872f08423929c98-ise-engine-hangul Tizen:6.0:Unified / emulator [ 100s] +obs://build.tizen.org/Tizen:6.0:Unified/emulator/b253c9d7facf3ebbe1215e992478ac22-ise-engine-hangul Tizen:6.0:Unified / emulator [ 100s] RPM meta information is different [ 100s] [ 100s] obspw30 finished "build ise-engine-hangul.spec" at Wed Dec 9 21:13:18 UTC 2020. [ 100s] Retried build at Thu Dec 10 08:01:43 2020 returned same result, skipped Retried build at Tue Dec 15 12:20:35 2020 returned same result, skipped Retried build at Tue Dec 15 13:48:55 2020 returned same result, skipped Retried build at Wed Dec 16 03:49:56 2020 returned same result, skipped Retried build at Fri Dec 18 14:33:13 2020 returned same result, skipped Retried build at Mon Dec 21 01:29:36 2020 returned same result, skipped Retried build at Tue Dec 22 02:23:45 2020 returned same result, skipped Retried build at Thu Dec 24 09:09:56 2020 returned same result, skipped Retried build at Mon Dec 28 02:42:06 2020 returned same result, skipped Retried build at Mon Dec 28 02:46:06 2020 returned same result, skipped Retried build at Mon Dec 28 10:35:12 2020 returned same result, skipped Retried build at Wed Dec 30 00:25:08 2020 returned same result, skipped Retried build at Sun Jan 3 08:09:25 2021 returned same result, skipped Retried build at Mon Jan 4 07:34:34 2021 returned same result, skipped Retried build at Wed Jan 6 01:12:28 2021 returned same result, skipped Retried build at Wed Jan 6 14:00:59 2021 returned same result, skipped Retried build at Thu Jan 7 08:07:55 2021 returned same result, skipped Retried build at Mon Jan 11 02:42:36 2021 returned same result, skipped Retried build at Mon Jan 11 23:08:20 2021 returned same result, skipped Retried build at Wed Jan 13 03:59:26 2021 returned same result, skipped Retried build at Mon Jan 18 07:51:59 2021 returned same result, skipped Retried build at Tue Jan 19 21:36:13 2021 returned same result, skipped Retried build at Thu Jan 21 21:43:45 2021 returned same result, skipped Retried build at Sat Jan 23 05:47:29 2021 returned same result, skipped Retried build at Mon Jan 25 08:48:41 2021 returned same result, skipped Retried build at Wed Jan 27 21:54:25 2021 returned same result, skipped Retried build at Wed Feb 3 07:56:07 2021 returned same result, skipped Retried build at Thu Feb 4 01:26:38 2021 returned same result, skipped Retried build at Thu Feb 4 08:48:09 2021 returned same result, skipped Retried build at Thu Feb 4 11:31:49 2021 returned same result, skipped Retried build at Tue Feb 23 21:40:02 2021 returned same result, skipped Retried build at Thu Feb 25 04:17:24 2021 returned same result, skipped Retried build at Sat Feb 27 03:23:56 2021 returned same result, skipped Retried build at Wed Mar 10 21:37:47 2021 returned same result, skipped Retried build at Fri Mar 12 10:55:31 2021 returned same result, skipped Retried build at Tue Mar 16 08:35:06 2021 returned same result, skipped Retried build at Sun Mar 21 22:00:38 2021 returned same result, skipped Retried build at Tue Mar 23 05:43:43 2021 returned same result, skipped Retried build at Wed Mar 31 14:00:30 2021 returned same result, skipped Retried build at Wed Mar 31 14:31:47 2021 returned same result, skipped Retried build at Fri Apr 9 04:46:01 2021 returned same result, skipped Retried build at Tue Apr 20 08:26:38 2021 returned same result, skipped Retried build at Tue Apr 20 14:32:28 2021 returned same result, skipped Retried build at Wed Apr 21 05:26:33 2021 returned same result, skipped Retried build at Tue Apr 27 16:20:06 2021 returned same result, skipped Retried build at Wed Apr 28 13:05:30 2021 returned same result, skipped Retried build at Fri Apr 30 11:59:28 2021 returned same result, skipped Retried build at Tue May 4 12:26:39 2021 returned same result, skipped Retried build at Tue May 11 12:52:42 2021 returned same result, skipped Retried build at Wed May 12 13:08:58 2021 returned same result, skipped Retried build at Sat May 15 08:59:05 2021 returned same result, skipped Retried build at Fri May 28 14:55:25 2021 returned same result, skipped Retried build at Tue Jun 1 14:24:40 2021 returned same result, skipped Retried build at Wed Sep 8 05:19:56 2021 returned same result, skipped Retried build at Mon Sep 13 01:39:36 2021 returned same result, skipped Retried build at Mon Sep 13 10:48:02 2021 returned same result, skipped Retried build at Wed Sep 15 11:00:12 2021 returned same result, skipped Retried build at Tue Oct 5 10:42:11 2021 returned same result, skipped