[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obsnw09 started "build _service:gbs:capi-system-sensor.spec" at Mon Dec 21 10:03:28 UTC 2020. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:6.0:Unified' repository 'standard' arch 'aarch64' srcmd5 'c9f7496c09b4ff87269ea7a7b77d190b' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling bash... [ 2s] [7/40] preinstalling diffutils... [ 2s] [8/40] preinstalling grep... [ 2s] [9/40] preinstalling libattr... [ 2s] [10/40] preinstalling libblkid... [ 2s] [11/40] preinstalling libbz2... [ 2s] [12/40] preinstalling libcap... [ 2s] [13/40] preinstalling libfreebl3... [ 2s] [14/40] preinstalling libgcc... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libelf... [ 7s] [30/40] preinstalling libmount... [ 7s] [31/40] preinstalling smack... [ 7s] [32/40] preinstalling bzip2... [ 7s] [33/40] preinstalling libmagic... [ 7s] [34/40] preinstalling libxml2... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 8s] [37/40] preinstalling util-linux-su... [ 8s] [38/40] preinstalling nss... [ 8s] [39/40] preinstalling libsoftokn3... [ 8s] [40/40] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-aarch64 postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: gio-branding-upstream -> libgio [ 8s] breaking dependency libgio -> gio-branding-upstream [ 8s] cycle: girepository -> libgirepository [ 8s] breaking dependency libgirepository -> girepository [ 8s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 8s] breaking dependency pkgmgr-info-parser -> pkgmgr-info [ 8s] cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] cycle: libkey-manager-client -> key-manager [ 8s] breaking dependency key-manager -> libkey-manager-client [ 8s] cycle: libsecurity-manager-client -> security-manager [ 8s] breaking dependency security-manager -> libsecurity-manager-client [ 8s] cycle: libsecurity-manager-client -> security-manager -> security-license-manager [ 8s] breaking dependency security-manager -> security-license-manager [ 8s] cycle: security-manager -> security-manager-policy [ 8s] breaking dependency security-manager -> security-manager-policy [ 8s] cycle: xmlsec1 -> xmlsec1-openssl [ 8s] breaking dependency xmlsec1-openssl -> xmlsec1 [ 8s] cycle: libalarm -> alarm-server [ 8s] breaking dependency alarm-server -> libalarm [ 8s] done [ 8s] [1/217] installing boost-license-1.71.0-2.1 [ 8s] [2/217] installing ca-certificates-tizen-0.2.0-3.1 [ 8s] [3/217] installing default-ac-domains-0.1-3.1 [ 9s] [4/217] installing dlog-config-persistent-logs-6.0.16-6.1 [ 9s] [5/217] installing libmagic-data-5.37-2.51 [ 9s] [6/217] installing setup-0.9-2.3 [ 9s] [7/217] installing filesystem-3.1-2.1 [ 9s] [8/217] installing glibc-2.30-2.20 [ 9s] [9/217] installing bash-3.2.57-2.1 [ 9s] [10/217] installing capi-base-common-0.4.59-2.1 [ 9s] [11/217] installing cpio-2.11-2.1 [ 10s] [12/217] installing diffutils-3.3-2.1 [ 10s] [13/217] installing findutils-4.3.8-2.70 [ 10s] [14/217] installing gdbm-1.8.3-2.76 [ 10s] [15/217] installing hostname-3.23-2.1 [ 10s] [16/217] installing iniparser-4.1-2.1 [ 10s] [17/217] installing libatomic-9.2.0-2.17 [ 11s] [18/217] installing libattr-2.4.47-2.77 [ 11s] [19/217] installing libblkid-2.34-3.3 [ 11s] [20/217] installing libbz2-1.0.8-2.75 [ 12s] [21/217] installing libcap-2.24-2.74 [ 12s] [22/217] installing libexpat-2.2.9-2.1 [ 12s] [23/217] installing libext2fs-1.43.4-2.1 [ 13s] [24/217] installing libffi-3.1-2.71 [ 13s] [25/217] installing libfreebl3-3.34.1-2.41 [ 13s] [26/217] installing libgcc-9.2.0-2.17 [ 13s] [27/217] installing libgomp-9.2.0-2.17 [ 14s] [28/217] installing libgpg-error-1.27-2.1 [ 14s] [29/217] installing libitm-9.2.0-2.17 [ 14s] [30/217] installing libltdl-2.4.2-2.56 [ 15s] [31/217] installing liblua-5.1.5-2.27 [ 15s] [32/217] installing liblzma-5.2.4-2.48 [ 15s] [33/217] installing libopenssl11-1.1.1g-2.32 [ 16s] [34/217] installing libpcre-8.43-2.3 [ 16s] [35/217] installing libpopt-1.16-2.76 [ 16s] [36/217] installing libpython3_7m1_0-3.7.3-2.31 [ 17s] [37/217] installing libsmack-1.3.1-2.67 [ 17s] [38/217] installing libsmartcols-2.34-3.3 [ 18s] [39/217] installing libsqlite-3.31.1-2.60 [ 18s] [40/217] installing libuuid-2.34-3.3 [ 18s] [41/217] installing m4-1.4.17-2.1 [ 18s] [42/217] installing net-tools-2.0_20121208git-2.1 [ 18s] [43/217] installing nspr-4.12-2.71 [ 19s] [44/217] installing patch-2.7-2.73 [ 19s] [45/217] installing pkg-config-0.28-2.65 [ 19s] [46/217] installing sed-4.1c-2.1 [ 19s] [47/217] installing update-alternatives-1.18.15-2.1 [ 19s] [48/217] installing which-2.20-2.1 [ 19s] [49/217] installing xdgmime-0.0.14-2.1 [ 19s] [50/217] installing zlib-1.2.11-2.73 [ 20s] [51/217] installing shadow-utils-4.1.4.2-2.4 [ 20s] [52/217] installing build-compare-2015.04.28-2.17 [ 20s] [53/217] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 21s] [54/217] installing sensord-dummy-4.0.54-2.1 [ 21s] [55/217] installing terminfo-base-full-6.1_20191207-3.1 [ 21s] [56/217] installing vconf-internal-keys-devel-0.0.176-2.1 [ 21s] [57/217] installing capi-base-common-devel-0.4.59-2.1 [ 22s] [58/217] installing coreutils-6.9-2.12 [ 22s] [59/217] installing cpp-9.2.0-2.17 [ 22s] [60/217] installing gawk-3.1.5-2.1 [ 22s] [61/217] installing gcc-c++-9.2.0-2.17 [ 23s] [62/217] installing grep-2.5.2-2.1 [ 23s] [63/217] installing libacl-2.2.52-2.77 [ 23s] [64/217] installing libblkid-devel-2.34-3.3 [ 23s] [65/217] installing libcap-tools-2.24-2.74 [ 23s] [66/217] installing libelf-0.178-2.11 [ 24s] [67/217] installing libffi-devel-3.1-2.71 [ 24s] [68/217] installing libgcrypt-1.8.3-2.1 [ 24s] [69/217] installing libgfortran-9.2.0-2.17 [ 24s] [70/217] installing libglib-2.62.3-2.11 [ 25s] [71/217] installing libmount-2.34-3.3 [ 25s] [72/217] installing libpcreposix-8.43-2.3 [ 25s] [73/217] installing libstdc++-9.2.0-2.17 [ 26s] [74/217] installing make-4.0-2.9 [ 26s] [75/217] installing minizip-1.2.11-2.73 [ 26s] [76/217] installing nss-certs-3.34.1-2.41 [ 26s] [77/217] installing smack-1.3.1-2.67 [ 26s] [78/217] installing sqlite-3.31.1-2.60 [ 27s] [79/217] installing bzip2-1.0.8-2.75 [ 27s] [80/217] installing libfdisk-2.34-3.3 [ 27s] [81/217] installing libmagic-5.37-2.51 [ 27s] [82/217] installing libsqlcipher-4.3.0-2.1 [ 28s] [83/217] installing libxml2-2.9.10-2.21 [ 28s] [84/217] installing perl-5.30.0-2.25 [ 30s] [85/217] installing xz-5.2.4-2.48 [ 30s] [86/217] installing libkmod-27-2.1 [ 30s] [87/217] installing python3-base-3.7.3-2.31 [ 32s] [88/217] installing build-mkbaselibs-20120927-2.1 [ 34s] [89/217] installing libstdc++-devel-9.2.0-2.17 [ 35s] [90/217] installing file-5.37-2.51 [ 35s] [91/217] installing libgmodule-2.62.3-2.11 [ 39s] [92/217] installing libgthread-2.62.3-2.11 [ 41s] [93/217] installing linux-glibc-devel-3.10-2.77 [ 42s] [94/217] installing tar-1.17-2.1 [ 42s] [95/217] installing autoconf-2.69-2.29 [ 42s] [96/217] installing binutils-2.33.1-2.23 [ 43s] [97/217] installing glibc-locale-2.30-2.20 [ 43s] [98/217] installing gzip-1.3.12-2.75 [ 43s] [99/217] installing libcc1-9.2.0-2.17 [ 44s] [100/217] installing libgobject-2.62.3-2.11 [ 44s] [101/217] installing libmount-devel-2.34-3.3 [ 44s] [102/217] installing libnss-security-manager-1.6.14-3.8 [ 45s] [103/217] installing libubsan-9.2.0-2.17 [ 45s] [104/217] installing openssl1.1-1.1.1g-2.32 [ 45s] [105/217] installing pam-1.1.6-2.1 [ 45s] [106/217] installing tizen-platform-config-5.0-2.1 [ 46s] [107/217] installing boost-filesystem-1.71.0-2.1 [ 48s] [108/217] installing boost-program-options-1.71.0-2.1 [ 48s] [109/217] installing context-sensor-recorder-dummy-4.0.1-2.1 [ 49s] [110/217] installing dlog-common-6.0.16-6.1 [ 49s] [111/217] installing libicu-65.1-2.2 [ 50s] [112/217] installing libncurses6-6.1_20191207-3.1 [ 51s] [113/217] installing libpcrecpp-8.43-2.3 [ 51s] [114/217] installing ttrace-1.0.3-3.3 [ 52s] [115/217] installing tzdata-2019c-2.1 [ 52s] [116/217] installing cynara-db-migration-0.16.0-3.1 [ 52s] [117/217] installing libdw-0.178-2.11 [ 52s] [118/217] installing security-config-1.0-5.1 [ 64s] groupadd: group 'dbus' already exists [ 64s] groupadd: group 'priv_appdebugging' already exists [ 64s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 64s] [119/217] installing libxslt-1.1.34-2.1 [ 65s] [120/217] installing libarchive-3.4.0-2.1 [ 65s] [121/217] installing shared-mime-info-1.7-2.1 [ 70s] [122/217] installing libncurses-6.1_20191207-3.1 [ 70s] [123/217] installing dlog-logger-6.0.16-6.1 [ 70s] [124/217] installing glibc-devel-2.30-2.20 [ 71s] [125/217] installing less-466-2.1 [ 71s] [126/217] installing libreadline-5.2-2.21 [ 71s] [127/217] installing libtzplatform-config-5.0-2.1 [ 71s] [128/217] installing procps-ng-3.3.15-2.1 [ 72s] [129/217] installing automake-1.15.1-2.37 [ 72s] [130/217] installing libasm-0.178-2.11 [ 72s] [131/217] installing ca-certificates-0.0.4-3.1 [ 72s] [132/217] installing boost-regex-1.71.0-2.1 [ 73s] [133/217] installing build-20120927-2.1 [ 73s] [134/217] installing libsystemd-244-6.1 [ 73s] [135/217] installing pcre-devel-8.43-2.3 [ 73s] [136/217] installing cmake-3.9.4-2.1 [ 74s] [137/217] installing gcc-9.2.0-2.17 [ 75s] [138/217] installing libtzplatform-config-devel-5.0-2.1 [ 75s] [139/217] installing qemu-accel-x86_64-aarch64-0.4-2.4 [ 86s] [140/217] installing tizen-platform-config-tools-5.0-2.1 [ 86s] [141/217] installing zlib-devel-1.2.11-2.73 [ 86s] [142/217] installing libtool-2.4.2-2.56 [ 86s] [143/217] installing sqlite-devel-3.31.1-2.60 [ 86s] [144/217] installing elfutils-0.178-2.11 [ 86s] [145/217] installing python3-3.7.3-2.4 [ 87s] [146/217] installing libdlog-6.0.16-6.1 [ 87s] [147/217] installing util-linux-2.34-3.3 [ 87s] [148/217] installing systemd-244-6.1 [ 89s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 89s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 89s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 89s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 89s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 89s] [149/217] installing libtracker-1.0.1-3.1 [ 89s] [150/217] installing libdlog-devel-6.0.16-6.1 [ 89s] [151/217] installing systemd-devel-244-6.1 [ 89s] [152/217] installing util-linux-su-2.34-3.3 [ 89s] [153/217] installing argos_watchdog-0.0.3-4.1 [ 90s] [154/217] installing libkey-manager-common-0.1.38-3.1 [ 90s] [155/217] installing libcynara-commons-0.16.0-3.1 [ 91s] [156/217] installing capi-system-info-0.5.2-4.1 [ 91s] Running capi-system-info %posttrans script [ 91s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 91s] iniparser: cannot open /etc/info.ini [ 91s] [157/217] installing pkgmgr-0.12.8-3.1 [ 92s] Running pkgmgr %posttrans script [ 92s] /var/tmp/rpm-tmp.rlKETl: line 4: pkg_initdb: command not found [ 92s] /var/tmp/rpm-tmp.rlKETl: line 5: install_preload_pkg: command not found [ 92s] /var/tmp/rpm-tmp.rlKETl: line 12: pkgcmd: command not found [ 92s] /var/tmp/rpm-tmp.rlKETl: line 14: /etc/package-manager/pkgmgr-label-initial-image.sh: No such file or directory [ 92s] [158/217] installing libcynara-agent-0.16.0-3.1 [ 92s] [159/217] installing libcynara-client-0.16.0-3.1 [ 93s] [160/217] installing libcynara-creds-commons-0.16.0-3.1 [ 93s] [161/217] installing libcynara-session-0.16.0-3.1 [ 93s] [162/217] installing libcynara-admin-0.16.0-3.1 [ 94s] [163/217] installing cynara-0.16.0-3.1 [ 94s] Running in chroot, ignoring request: daemon-reload [ 94s] Running in chroot, ignoring request: restart [ 94s] [164/217] installing cyad-0.16.0-3.1 [ 94s] [165/217] installing libcynara-creds-socket-0.16.0-3.1 [ 94s] [166/217] installing nss-3.34.1-2.41 [ 95s] [167/217] installing xmlsec1-openssl-1.2.28-2.3 [ 95s] [168/217] installing libgio-2.62.3-2.11 [ 96s] [169/217] installing gio-branding-upstream-2.62.3-2.11 [ 96s] [170/217] installing libjson-glib-1.4.4-2.1 [ 96s] [171/217] installing libsoftokn3-3.34.1-2.41 [ 97s] [172/217] installing glib2-tools-2.62.3-2.11 [ 97s] [173/217] installing libcynara-creds-gdbus-0.16.0-3.1 [ 97s] [174/217] installing libsyscommon-4.1-6.1 [ 97s] [175/217] installing xmlsec1-1.2.28-2.3 [ 97s] [176/217] installing libgirepository-1.52.1-2.1 [ 98s] [177/217] installing context-common-4.0.3-2.1 [ 98s] [178/217] installing pkgmgr-info-parser-0.18.4-3.1 [ 98s] [179/217] installing rpm-4.11.0.1-3.2 [ 99s] [180/217] installing buxton2-1.7.2-5.1 [ 100s] Running buxton2 %posttrans script [ 100s] chmod: cannot access `/etc/buxton2/*': No such file or directory [ 100s] /etc/buxton2/*: No such file or directory [ 100s] chmod: cannot access `/var/lib/buxton2/*': No such file or directory [ 100s] /var/lib/buxton2/*: No such file or directory [ 100s] [181/217] installing girepository-1.52.1-2.1 [ 100s] [182/217] installing vconf-compat-1.7.2-5.1 [ 100s] [183/217] installing bundle-0.5.5-3.1 [ 100s] [184/217] installing rpm-build-4.11.0.1-3.2 [ 100s] [185/217] installing glib2-devel-2.62.3-2.11 [ 101s] [186/217] installing typelib-Json-1.4.4-2.1 [ 101s] [187/217] installing bundle-devel-0.5.5-3.1 [ 101s] [188/217] installing eventsystem-0.1.14-2.1 [ 101s] [189/217] installing vconf-compat-devel-1.7.2-5.1 [ 101s] [190/217] installing capi-system-device-0.1.0-4.1 [ 101s] [191/217] installing libstorage-1.0.0-4.1 [ 102s] [192/217] installing pkgmgr-info-0.18.4-3.1 [ 102s] [193/217] installing sensord-devel-4.0.54-2.1 [ 102s] [194/217] installing json-glib-devel-1.4.4-2.1 [ 102s] [195/217] installing pkgmgr-installer-0.12.8-3.1 [ 102s] [196/217] installing pkgmgr-client-0.12.8-3.1 [ 103s] [197/217] installing security-privilege-manager-1.2.9-2.12 [ 103s] mdm blacklist exist [ 103s] Check inserted data [ 103s] DPM blacklist... [ 103s] [ 103s] MDM blacklist... [ 103s] [198/217] installing capi-appfw-package-manager-0.8.7-2.1 [ 104s] [199/217] installing aul-0.28.4-5.8 [ 104s] [200/217] installing security-manager-1.6.14-3.8 [ 105s] Running in chroot, ignoring request: daemon-reload [ 105s] Running in chroot, ignoring request: start [ 105s] [201/217] installing app-svc-0.1.57-2.1 [ 105s] [202/217] installing libsecurity-manager-client-1.6.14-3.8 [ 106s] [203/217] installing security-manager-policy-1.6.14-3.8 [ 113s] Running in chroot, ignoring request: stop [ 113s] Running in chroot, ignoring request: start [ 113s] [204/217] installing app-core-common-1.14.7-2.1 [ 113s] [205/217] installing capi-appfw-app-control-0.14.1-3.1 [ 114s] [206/217] installing security-license-manager-1.6.14-3.8 [ 114s] Running in chroot, ignoring request: daemon-reload [ 114s] Running in chroot, ignoring request: start [ 114s] [207/217] installing key-manager-0.1.38-3.1 [ 115s] Running in chroot, ignoring request: daemon-reload [ 115s] Running in chroot, ignoring request: start [ 115s] [208/217] installing capi-appfw-app-control-devel-0.14.1-3.1 [ 115s] [209/217] installing libkey-manager-client-0.1.38-3.1 [ 115s] [210/217] installing notification-0.5.85-5.1 [ 115s] [211/217] installing notification-devel-0.5.85-5.1 [ 116s] [212/217] installing cert-svc-2.2.1-3.1 [ 116s] Running in chroot, ignoring request: daemon-reload [ 116s] Running in chroot, ignoring request: start [ 116s] [213/217] installing alarm-server-0.12.6-2.2 [ 116s] Running alarm-server %posttrans script [ 116s] [214/217] installing libalarm-0.12.6-2.2 [ 117s] [215/217] installing libalarm-devel-0.12.6-2.2 [ 117s] [216/217] installing context-common-devel-4.0.3-2.1 [ 117s] [217/217] installing context-sensor-recorder-devel-4.0.1-2.1 [ 117s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 117s] now finalizing build dir... [ 117s] Running build time source services... [ 118s] build target is aarch64-tizen-linux [ 118s] ----------------------------------------------------------------- [ 118s] I have the following modifications for capi-system-sensor.spec: [ 118s] 5c5 [ 118s] < Release: 1 [ 118s] --- [ 118s] > Release: 3.1 [ 118s] ----------------------------------------------------------------- [ 118s] ----- building capi-system-sensor.spec (user abuild) [ 118s] ----------------------------------------------------------------- [ 118s] ----------------------------------------------------------------- [ 118s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.0:Unified/standard/c9f7496c09b4ff87269ea7a7b77d190b-capi-system-sensor' -ba /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 118s] Building target platforms: aarch64-tizen-linux [ 118s] Building for target aarch64-tizen-linux [ 118s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.4l8Vm4 [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + rm -rf capi-system-sensor-0.2.5 [ 118s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.2.5.tar.gz [ 118s] + /bin/tar -xf - [ 118s] + STATUS=0 [ 118s] + '[' 0 -ne 0 ']' [ 118s] + cd capi-system-sensor-0.2.5 [ 118s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 118s] + exit 0 [ 118s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.P2mcZ6 [ 118s] + umask 022 [ 118s] + cd /home/abuild/rpmbuild/BUILD [ 118s] + cd capi-system-sensor-0.2.5 [ 118s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 118s] + ref=/usr/lib/rpm [ 118s] + for s in guess sub [ 118s] ++ find -maxdepth 8 -name config.guess [ 118s] + for s in guess sub [ 118s] ++ find -maxdepth 8 -name config.sub [ 118s] + LANG=C [ 118s] + export LANG [ 118s] + unset DISPLAY [ 118s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 118s] + export CFLAGS [ 118s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 118s] + export CXXFLAGS [ 118s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 118s] + export FFLAGS [ 118s] + LDFLAGS= [ 118s] + export LDFLAGS [ 118s] ++ echo 0.2.5 [ 118s] ++ awk 'BEGIN {FS="."}{print $1}' [ 118s] + MAJORVER=0 [ 118s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 118s] + export CFLAGS [ 118s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 118s] + export CXXFLAGS [ 118s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 118s] + export FFLAGS [ 118s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.2.5 -DMAJORVER=0 -DSENSOR_RECORDER=on [ 118s] -- The C compiler identification is GNU 9.2.0 [ 118s] -- The CXX compiler identification is GNU 9.2.0 [ 118s] -- Check for working C compiler: /bin/cc [ 118s] -- Check for working C compiler: /bin/cc -- works [ 118s] -- Detecting C compiler ABI info [ 118s] -- Detecting C compiler ABI info - done [ 118s] -- Detecting C compile features [ 118s] -- Detecting C compile features - done [ 118s] -- Check for working CXX compiler: /bin/c++ [ 118s] -- Check for working CXX compiler: /bin/c++ -- works [ 118s] -- Detecting CXX compiler ABI info [ 119s] -- Detecting CXX compiler ABI info - done [ 119s] -- Detecting CXX compile features [ 119s] -- Detecting CXX compile features - done [ 119s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 119s] -- Checking for module 'dlog sensor capi-base-common context-sensor-recorder-client' [ 119s] -- Found dlog sensor capi-base-common context-sensor-recorder-client, version 1.0;4.0.54;0.4.59;4.0.1 [ 119s] -- Configuring done [ 119s] -- Generating done [ 119s] CMake Warning: [ 119s] Manually-specified variables were not used by the project: [ 119s] [ 119s] INCLUDE_INSTALL_DIR [ 119s] LIB_SUFFIX [ 119s] SHARE_INSTALL_PREFIX [ 119s] SYSCONF_INSTALL_DIR [ 119s] [ 119s] [ 119s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 119s] + /bin/make -j4 [ 119s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 119s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 119s] /bin/make -f CMakeFiles/Makefile2 all [ 119s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 119s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 119s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 119s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 119s] Scanning dependencies of target capi-system-sensor [ 119s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 119s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 119s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 119s] [ 16%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 119s] [ 33%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o [ 119s] [ 66%] Building C object CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o [ 119s] /bin/c++ -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -o CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor.cpp [ 119s] [ 66%] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 119s] /bin/c++ -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_provider.cpp [ 119s] /bin/cc -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/geomagnetic_field.c [ 119s] /bin/cc -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/fusion_util.c [ 120s] [ 83%] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o [ 120s] /bin/c++ -Dcapi_system_sensor_EXPORTS -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/include -I/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -fPIC -o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/src/sensor_recorder.cpp [ 121s] [100%] Linking CXX shared library libcapi-system-sensor.so [ 121s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-system-sensor.dir/link.txt --verbose=1 [ 121s] /bin/c++ -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -pthread -I/usr/include/sensor -I/usr/include/vconf -I/usr/include/context-service -I/usr/include/json-glib-1.0 -I/usr/include/context-service -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -fPIC -Wall -Werror -g -fdump-rtl-expand -std=c++0x -shared -Wl,-soname,libcapi-system-sensor.so.0 -o libcapi-system-sensor.so.0.2.5 CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o CMakeFiles/capi-system-sensor.dir/src/sensor_provider.cpp.o CMakeFiles/capi-system-sensor.dir/src/geomagnetic_field.c.o CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o CMakeFiles/capi-system-sensor.dir/src/sensor_recorder.cpp.o -L/usr//usr/lib64 -lsensor -lvconf -lcontext-sensor-recorder-client -ljson-glib-1.0 -lcontext-client -lcontext-shared -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lcapi-base-common -ldlog -lsqlite3 [ 121s] /usr/bin/cmake -E cmake_symlink_library libcapi-system-sensor.so.0.2.5 libcapi-system-sensor.so.0 libcapi-system-sensor.so [ 121s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] [100%] Built target capi-system-sensor [ 121s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 121s] + exit 0 [ 121s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sClYD3 [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd capi-system-sensor-0.2.5 [ 121s] + LANG=C [ 121s] + export LANG [ 121s] + unset DISPLAY [ 121s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 121s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 121s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 install [ 121s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 -B/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 --check-build-system CMakeFiles/Makefile.cmake 0 [ 121s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/progress.marks [ 121s] /bin/make -f CMakeFiles/Makefile2 all [ 121s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/depend [ 121s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] cd /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles/capi-system-sensor.dir/DependInfo.cmake --color= [ 121s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] /bin/make -f CMakeFiles/capi-system-sensor.dir/build.make CMakeFiles/capi-system-sensor.dir/build [ 121s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] make[2]: Nothing to be done for 'CMakeFiles/capi-system-sensor.dir/build'. [ 121s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] [100%] Built target capi-system-sensor [ 121s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/CMakeFiles 0 [ 121s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 121s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] make[1]: Nothing to be done for 'preinstall'. [ 121s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5' [ 121s] Install the project... [ 121s] /usr/bin/cmake -P cmake_install.cmake [ 121s] -- Install configuration: "" [ 121s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/pkgconfig/capi-system-sensor.pc [ 121s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/include/sensor/sensor.h [ 121s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so.0.2.5 [ 121s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so.0 [ 121s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so [ 121s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/info/dir [ 121s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 -regex '.*\.la$' [ 121s] + xargs rm -f -- [ 121s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 -regex '.*\.a$' [ 121s] + xargs rm -f -- [ 121s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5 [ 121s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/lib64/libcapi-system-sensor.so.0.2.5 [ 121s] 299 blocks [ 121s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/capi-system-sensor-debuginfo.manifest [ 121s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.2.5/capi-system-sensor-debugsource.manifest [ 121s] + /usr/lib/rpm/check-buildroot [ 121s] + /usr/lib/rpm//brp-compress [ 121s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 121s] + /usr/lib/rpm/brp-python-hardlink [ 121s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 121s] Processing files: capi-system-sensor-0.2.5-3.1.aarch64 [ 121s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 121s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 121s] [ 121s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.QDRry5 [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd capi-system-sensor-0.2.5 [ 121s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/licenses/capi-system-sensor [ 121s] + export LICENSEDIR [ 121s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/licenses/capi-system-sensor [ 121s] + cp -pr LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64/usr/share/licenses/capi-system-sensor [ 121s] + exit 0 [ 121s] Provides: capi-system-sensor = 0.2.5-3.1 capi-system-sensor(aarch-64) = 0.2.5-3.1 capi-system-sensor-profile_common = 0.2.5-3.1 capi-system-sensor-profile_ivi = 0.2.5-3.1 capi-system-sensor-profile_mobile = 0.2.5-3.1 capi-system-sensor-profile_tv = 0.2.5-3.1 capi-system-sensor-profile_wearable = 0.2.5-3.1 libcapi-system-sensor.so.0()(64bit) [ 121s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 121s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 121s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 121s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 121s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcontext-sensor-recorder-client.so.4()(64bit) libdlog.so.0()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.17)(64bit) libm.so.6(GLIBC_2.27)(64bit) libsensor.so.4()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) [ 121s] Processing files: capi-system-sensor-debugsource-0.2.5-3.1.aarch64 [ 121s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 121s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 121s] [ 121s] Provides: capi-system-sensor-debugsource = 0.2.5-3.1 capi-system-sensor-debugsource(aarch-64) = 0.2.5-3.1 [ 121s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 121s] Processing files: capi-system-sensor-devel-0.2.5-3.1.aarch64 [ 121s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 121s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 121s] [ 122s] Provides: capi-system-sensor-devel = 0.2.5-3.1 capi-system-sensor-devel(aarch-64) = 0.2.5-3.1 pkgconfig(capi-system-sensor) = 0.2.5 [ 122s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 122s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0()(64bit) pkgconfig(capi-base-common) pkgconfig(context-sensor-recorder-client) pkgconfig(dlog) pkgconfig(sensor) [ 122s] Processing files: capi-system-sensor-debuginfo-0.2.5-3.1.aarch64 [ 122s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 122s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 122s] [ 122s] Provides: capi-system-sensor-debuginfo = 0.2.5-3.1 capi-system-sensor-debuginfo(aarch-64) = 0.2.5-3.1 [ 122s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 122s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 122s] warning: Could not canonicalize hostname: obsnw09 [ 122s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-3.1.src.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-0.2.5-3.1.aarch64.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debugsource-0.2.5-3.1.aarch64.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-devel-0.2.5-3.1.aarch64.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debuginfo-0.2.5-3.1.aarch64.rpm [ 122s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yTWvw5 [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd capi-system-sensor-0.2.5 [ 122s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.2.5-3.1.aarch64 [ 122s] + exit 0 [ 122s] ... checking for files with abuild user/group [ 122s] ... creating baselibs [ 123s] ... comparing built packages with the former built [ 123s] /usr/lib/build/pkg-diff.sh [ 123s] compare /.build.oldpackages/capi-system-sensor-0.2.5-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.2.5-3.1.src.rpm [ 123s] This is not a prerelease project. Compare the project name. [ 123s] comparing rpmtags [ 123s] comparing RELEASE [ 123s] comparing PROVIDES [ 123s] comparing scripts [ 123s] comparing filelist [ 123s] comparing file checksum [ 123s] RPM meta information is identical [ 123s] compare /.build.oldpackages/capi-system-sensor-0.2.5-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-0.2.5-3.1.aarch64.rpm [ 123s] Comparing capi-system-sensor-0.2.5-2.1.aarch64.rpm to capi-system-sensor-0.2.5-3.1.aarch64.rpm [ 123s] This is not a prerelease project. Compare the project name. [ 123s] comparing rpmtags [ 123s] --- /tmp/tmp.MGfRT68104/tmp.mdIea68122 2020-12-21 10:05:31.832838575 +0000 [ 123s] +++ /tmp/tmp.MGfRT68104/tmp.OjWea68124 2020-12-21 10:05:31.840838545 +0000 [ 123s] @@ -8,4 +8,4 @@ [ 123s] cpio xz 5T [ 123s] [ 123s] (none) (none) (none) [ 123s] -obs://build.tizen.org/Tizen:6.0:Unified/standard/5a3dc97760ab2c0db9cb9564579aecf1-capi-system-sensor Tizen:6.0:Unified [ 123s] +obs://build.tizen.org/Tizen:6.0:Unified/standard/c9f7496c09b4ff87269ea7a7b77d190b-capi-system-sensor Tizen:6.0:Unified [ 123s] RPM meta information is different [ 123s] compare /.build.oldpackages/capi-system-sensor-debuginfo-0.2.5-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debuginfo-0.2.5-3.1.aarch64.rpm [ 123s] skipping -debuginfo package [ 123s] compare /.build.oldpackages/capi-system-sensor-debugsource-0.2.5-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-debugsource-0.2.5-3.1.aarch64.rpm [ 123s] Comparing capi-system-sensor-debugsource-0.2.5-2.1.aarch64.rpm to capi-system-sensor-debugsource-0.2.5-3.1.aarch64.rpm [ 124s] This is not a prerelease project. Compare the project name. [ 124s] comparing rpmtags [ 124s] --- /tmp/tmp.GVSwq68156/tmp.MuyLI68186 2020-12-21 10:05:32.048837727 +0000 [ 124s] +++ /tmp/tmp.GVSwq68156/tmp.SgQVd68188 2020-12-21 10:05:32.060837680 +0000 [ 124s] @@ -10,4 +10,4 @@ [ 124s] cpio xz 5T [ 124s] [ 124s] (none) (none) (none) [ 124s] -obs://build.tizen.org/Tizen:6.0:Unified/standard/5a3dc97760ab2c0db9cb9564579aecf1-capi-system-sensor Tizen:6.0:Unified [ 124s] +obs://build.tizen.org/Tizen:6.0:Unified/standard/c9f7496c09b4ff87269ea7a7b77d190b-capi-system-sensor Tizen:6.0:Unified [ 124s] RPM meta information is different [ 124s] compare /.build.oldpackages/capi-system-sensor-devel-0.2.5-2.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/capi-system-sensor-devel-0.2.5-3.1.aarch64.rpm [ 124s] Comparing capi-system-sensor-devel-0.2.5-2.1.aarch64.rpm to capi-system-sensor-devel-0.2.5-3.1.aarch64.rpm [ 124s] This is not a prerelease project. Compare the project name. [ 124s] comparing rpmtags [ 124s] --- /tmp/tmp.WIDFU68258/tmp.axtmh68277 2020-12-21 10:05:32.268836863 +0000 [ 124s] +++ /tmp/tmp.WIDFU68258/tmp.rPoPD68281 2020-12-21 10:05:32.280836816 +0000 [ 124s] @@ -10,4 +10,4 @@ [ 124s] cpio xz 5T [ 124s] [ 124s] (none) (none) (none) [ 124s] -obs://build.tizen.org/Tizen:6.0:Unified/standard/5a3dc97760ab2c0db9cb9564579aecf1-capi-system-sensor Tizen:6.0:Unified [ 124s] +obs://build.tizen.org/Tizen:6.0:Unified/standard/c9f7496c09b4ff87269ea7a7b77d190b-capi-system-sensor Tizen:6.0:Unified [ 124s] RPM meta information is different [ 124s] [ 124s] obsnw09 finished "build capi-system-sensor.spec" at Mon Dec 21 10:05:32 UTC 2020. [ 124s] Retried build at Tue Dec 22 09:42:09 2020 returned same result, skipped Retried build at Thu Dec 24 09:39:06 2020 returned same result, skipped Retried build at Mon Dec 28 03:11:17 2020 returned same result, skipped Retried build at Mon Dec 28 10:49:14 2020 returned same result, skipped Retried build at Mon Jan 4 07:48:43 2021 returned same result, skipped Retried build at Mon Jan 11 02:51:37 2021 returned same result, skipped Retried build at Mon Jan 18 08:18:08 2021 returned same result, skipped Retried build at Tue Jan 19 21:51:44 2021 returned same result, skipped Retried build at Thu Jan 21 21:38:44 2021 returned same result, skipped Retried build at Sat Jan 23 06:06:06 2021 returned same result, skipped Retried build at Mon Jan 25 08:42:00 2021 returned same result, skipped Retried build at Thu Feb 4 11:19:12 2021 returned same result, skipped Retried build at Tue Feb 23 23:48:22 2021 returned same result, skipped Retried build at Thu Feb 25 04:21:02 2021 returned same result, skipped Retried build at Sat Feb 27 03:25:04 2021 returned same result, skipped Retried build at Sun Mar 7 22:03:51 2021 returned same result, skipped Retried build at Wed Mar 31 13:34:24 2021 returned same result, skipped Retried build at Tue Apr 20 08:55:52 2021 returned same result, skipped Retried build at Tue Apr 20 13:49:14 2021 returned same result, skipped Retried build at Tue Apr 27 16:43:56 2021 returned same result, skipped Retried build at Wed Apr 28 13:09:54 2021 returned same result, skipped Retried build at Fri Apr 30 12:05:50 2021 returned same result, skipped Retried build at Tue May 4 12:47:24 2021 returned same result, skipped Retried build at Tue May 11 13:00:01 2021 returned same result, skipped Retried build at Sat May 15 09:15:11 2021 returned same result, skipped Retried build at Fri May 28 14:50:18 2021 returned same result, skipped Retried build at Tue Jun 1 14:56:45 2021 returned same result, skipped Retried build at Fri Jul 23 12:42:40 2021 returned same result, skipped Retried build at Tue Aug 3 12:48:23 2021 returned same result, skipped Retried build at Wed Aug 11 13:35:59 2021 returned same result, skipped Retried build at Mon Sep 13 01:38:39 2021 returned same result, skipped Retried build at Mon Sep 13 11:18:19 2021 returned same result, skipped Retried build at Wed Sep 15 11:09:10 2021 returned same result, skipped Retried build at Tue Oct 5 12:04:23 2021 returned same result, skipped Retried build at Tue Oct 5 14:10:12 2021 returned same result, skipped Retried build at Tue Oct 5 14:38:49 2021 returned same result, skipped