[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw10 started "build _service:gbs:perl-json.spec" at Thu Oct 28 05:53:32 UTC 2021. [ 0s] [ 0s] Building perl-json for project 'Tizen:6.5:Base' repository 'standard' arch 'armv7l' srcmd5 '969110845b41d31083f4fc2b2da1fa25' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:perl-json.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:perl-json.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:perl-json.spec build rpmlint-Factory ... [ 0s] copying qemu [ 3s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 3s] [ 3s] registering binfmt handlers for cross build [ 3s] write: Invalid argument [ 3s] /proc/sys/fs/binfmt_misc/register: write failed [ 3s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 3s] [ 3s] /.build/qemu-reg: No such file or directory [ 3s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 3s] /usr/lib/build/qemu-reg: No such file or directory [ 3s] /usr/lib/build/qemu-reg: binfmt registration failed [ 4s] cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/41] preinstalling libmagic-data... [ 4s] [2/41] preinstalling libncurses... [ 4s] [3/41] preinstalling setup... [ 4s] [4/41] preinstalling filesystem... [ 4s] [5/41] preinstalling glibc... [ 5s] [6/41] preinstalling libgcc... [ 5s] [7/41] preinstalling libzstd1... [ 5s] [8/41] preinstalling bash... [ 5s] [9/41] preinstalling diffutils... [ 5s] [10/41] preinstalling grep... [ 5s] [11/41] preinstalling libattr... [ 5s] [12/41] preinstalling libblkid... [ 5s] [13/41] preinstalling libbz2... [ 5s] [14/41] preinstalling libcap... [ 5s] [15/41] preinstalling libfreebl3... [ 5s] [16/41] preinstalling liblua... [ 5s] [17/41] preinstalling liblzma... [ 5s] [18/41] preinstalling libpopt... [ 5s] [19/41] preinstalling libreadline... [ 5s] [20/41] preinstalling libsmack... [ 5s] [21/41] preinstalling libsqlite... [ 5s] [22/41] preinstalling libuuid... [ 5s] [23/41] preinstalling nspr... [ 5s] [24/41] preinstalling sed... [ 5s] [25/41] preinstalling zlib... [ 5s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 11s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 12s] [28/41] preinstalling coreutils... [ 12s] [29/41] preinstalling libacl... [ 13s] [30/41] preinstalling libelf... [ 13s] [31/41] preinstalling libmount... [ 13s] [32/41] preinstalling smack... [ 13s] [33/41] preinstalling bzip2... [ 13s] [34/41] preinstalling libmagic... [ 13s] [35/41] preinstalling libxml2... [ 13s] [36/41] preinstalling tar... [ 13s] [37/41] preinstalling util-linux... [ 13s] [38/41] preinstalling util-linux-su... [ 13s] [39/41] preinstalling nss... [ 13s] [40/41] preinstalling libsoftokn3... [ 13s] [41/41] preinstalling rpm... [ 13s] [ 13s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] running qemu-accel-x86_64-armv7l postinstall script [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 14s] reordering...cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 15s] [1/96] installing libmagic-data-5.39-4.165 [ 16s] [2/96] installing setup-0.9-4.41 [ 17s] warning: /etc/profile created as /etc/profile.rpmnew [ 17s] [3/96] installing filesystem-3.1-4.1 [ 17s] [4/96] installing glibc-2.30-12.5 [ 18s] [5/96] installing libatomic-9.2.0-13.4 [ 18s] [6/96] installing libgcc-9.2.0-13.4 [ 19s] [7/96] installing libzstd1-1.4.5-1.145 [ 20s] [8/96] installing bash-3.2.57-4.5 [ 20s] [9/96] installing cpio-2.8-5.3 [ 20s] [10/96] installing diffutils-3.3-4.3 [ 20s] [11/96] installing findutils-4.3.8-4.78 [ 21s] [12/96] installing gdbm-1.8.3-3.275 [ 21s] [13/96] installing hostname-3.23-3.3 [ 22s] [14/96] installing libattr-2.4.48-4.194 [ 22s] [15/96] installing libblkid-2.36-7.37 [ 23s] [16/96] installing libbz2-1.0.8-4.211 [ 23s] [17/96] installing libcap-2.24-3.251 [ 23s] [18/96] installing libext2fs-1.46.0-4.23 [ 24s] [19/96] installing libfreebl3-3.34.1-3.205 [ 24s] [20/96] installing libgfortran-9.2.0-13.4 [ 24s] [21/96] installing libgomp-9.2.0-13.4 [ 25s] [22/96] installing libitm-9.2.0-13.4 [ 26s] [23/96] installing libltdl-2.4.2-3.219 [ 26s] [24/96] installing liblua-5.1.5-3.164 [ 27s] [25/96] installing liblzma-5.2.5-4.120 [ 27s] [26/96] installing libopenssl11-1.1.1k-5.49 [ 28s] [27/96] installing libpcre-8.44-4.34 [ 28s] [28/96] installing libpopt-1.16-3.249 [ 29s] [29/96] installing libsmack-1.3.1-3.243 [ 29s] [30/96] installing libsmartcols-2.36-7.37 [ 30s] [31/96] installing libsqlite-3.33.0-4.175 [ 31s] [32/96] installing libstdc++-9.2.0-13.4 [ 31s] [33/96] installing libuuid-2.36-7.37 [ 33s] [34/96] installing m4-1.4.17-3.3 [ 34s] [35/96] installing net-tools-2.0_20121208git-4.4 [ 37s] [36/96] installing nspr-4.12-3.250 [ 39s] [37/96] installing patch-2.7-6.73 [ 39s] [38/96] installing pkg-config-0.28-3.246 [ 40s] [39/96] installing sed-4.1c-4.2 [ 40s] [40/96] installing update-alternatives-1.20.5-3.4 [ 40s] [41/96] installing which-2.17-4.4 [ 41s] [42/96] installing zlib-1.2.11-3.260 [ 42s] [43/96] installing build-compare-2015.04.28-3.103 [ 43s] [44/96] installing libstdc++-devel-9.2.0-13.4 [ 45s] [45/96] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 56s] [46/96] installing terminfo-base-full-6.2-6.27 [ 58s] [47/96] installing cpp-9.2.0-13.4 [ 60s] [48/96] installing gcc-c++-9.2.0-13.4 [ 61s] [49/96] installing binutils-2.33.1-9.27 [ 62s] [50/96] installing coreutils-6.9-5.31 [ 64s] [51/96] installing gawk-3.1.5-4.4 [ 65s] [52/96] installing grep-2.5.2-3.4 [ 66s] [53/96] installing libacl-2.2.53-4.193 [ 68s] [54/96] installing libcc1-9.2.0-13.4 [ 70s] [55/96] installing libelf-0.178-3.149 [ 71s] [56/96] installing libmount-2.36-7.37 [ 73s] [57/96] installing libubsan-9.2.0-13.4 [ 74s] [58/96] installing make-4.0-2.75 [ 75s] [59/96] installing nss-certs-3.34.1-3.205 [ 75s] [60/96] installing smack-1.3.1-3.243 [ 75s] [61/96] installing bzip2-1.0.8-4.211 [ 76s] [62/96] installing libfdisk-2.36-7.37 [ 78s] [63/96] installing libmagic-5.39-4.165 [ 80s] [64/96] installing libxml2-2.9.12-7.6 [ 82s] [65/96] installing perl-5.32.0-4.97 [ 85s] [66/96] installing xz-5.2.5-4.120 [ 85s] [67/96] installing build-mkbaselibs-20120927-3.3 [ 85s] [68/96] installing linux-glibc-devel-3.10-4.101 [ 86s] [69/96] installing autoconf-2.69-3.162 [ 86s] [70/96] installing file-5.39-4.165 [ 86s] [71/96] installing glibc-locale-2.30-12.5 [ 87s] [72/96] installing tar-1.17-3.2 [ 88s] [73/96] installing gzip-1.3.12-3.250 [ 88s] [74/96] installing libncurses6-6.2-6.27 [ 91s] [75/96] installing pam-1.1.6-3.4 [ 92s] [76/96] installing tzdata-2020a-3.3 [ 94s] [77/96] installing libdw-0.178-3.149 [ 95s] [78/96] installing libarchive-3.5.1-2.46 [ 96s] [79/96] installing gcc-9.2.0-13.4 [ 97s] [80/96] installing libncurses-6.2-6.27 [ 97s] [81/96] installing glibc-devel-2.30-12.5 [ 97s] [82/96] installing qemu-accel-x86_64-armv7l-0.4-9.2 [ 117s] [83/96] installing automake-1.15.1-3.179 [ 118s] [84/96] installing less-466-3.4 [ 118s] [85/96] installing libreadline-5.2-3.74 [ 120s] [86/96] installing procps-ng-3.3.16-3.4 [ 121s] [87/96] installing libasm-0.178-3.149 [ 121s] [88/96] installing build-20120927-3.3 [ 122s] [89/96] installing libtool-2.4.2-3.219 [ 123s] [90/96] installing elfutils-0.178-3.149 [ 123s] [91/96] installing util-linux-2.36-7.37 [ 125s] [92/96] installing util-linux-su-2.36-7.37 [ 125s] [93/96] installing nss-3.34.1-3.205 [ 126s] [94/96] installing libsoftokn3-3.34.1-3.205 [ 127s] [95/96] installing rpm-4.14.1.1-8.34 [ 129s] [96/96] installing rpm-build-4.14.1.1-8.34 [ 129s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 130s] now finalizing build dir... [ 131s] Running build time source services... [ 131s] build target is armv7l-tizen-linux [ 131s] ----------------------------------------------------------------- [ 131s] I have the following modifications for perl-json.spec: [ 131s] 4c4 [ 131s] < Release: 1 [ 131s] --- [ 131s] > Release: 1.1 [ 131s] ----------------------------------------------------------------- [ 131s] ----- building perl-json.spec (user abuild) [ 131s] ----------------------------------------------------------------- [ 131s] ----------------------------------------------------------------- [ 131s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Base/standard/969110845b41d31083f4fc2b2da1fa25-perl-json' -ba /home/abuild/rpmbuild/SOURCES/perl-json.spec [ 133s] Building target platforms: armv7l-tizen-linux [ 133s] Building for target armv7l-tizen-linux [ 133s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bBSZ5h [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + rm -rf perl-json-4.02 [ 133s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-4.02.tar.gz [ 133s] + /bin/tar -xof - [ 133s] + STATUS=0 [ 133s] + '[' 0 -ne 0 ']' [ 133s] + cd perl-json-4.02 [ 133s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 133s] + exit 0 [ 133s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ZgBjDg [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd perl-json-4.02 [ 133s] ++ uname -m [ 133s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 133s] + LANG=C [ 133s] + export LANG [ 133s] + unset DISPLAY [ 133s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CFLAGS [ 133s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 133s] + export CXXFLAGS [ 133s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 133s] + export FFLAGS [ 133s] + LDFLAGS= [ 133s] + export LDFLAGS [ 133s] + perl Makefile.PL [ 134s] Welcome to JSON (v.4.02) [ 134s] ============================= [ 134s] [ 134s] ** BACKWARD INCOMPATIBILITY ** [ 134s] [ 134s] Since version 2.90, stringification (and string comparison) for [ 134s] JSON::true and JSON::false has not been overloaded. It shouldn't [ 134s] matter as long as you treat them as boolean values, but a code that [ 134s] expects they are stringified as "true" or "false" doesn't work as [ 134s] you have expected any more. [ 134s] [ 134s] if (JSON::true eq 'true') { # now fails [ 134s] [ 134s] print "The result is 1 now."; # => The result is 1 now. [ 134s] [ 134s] And now these boolean values don't inherit JSON::Boolean, either. [ 134s] When you need to test a value is a JSON boolean value or not, use [ 134s] JSON::is_bool function, instead of testing the value inherits [ 134s] a particular boolean class or not. [ 134s] [ 134s] Checking if your kit is complete... [ 134s] Looks good [ 135s] Generating a Unix-style Makefile [ 135s] Writing Makefile for JSON [ 135s] Writing MYMETA.yml and MYMETA.json [ 135s] + make [ 138s] cp lib/JSON.pm blib/lib/JSON.pm [ 138s] cp lib/JSON/backportPP.pm blib/lib/JSON/backportPP.pm [ 138s] cp lib/JSON/backportPP/Compat5006.pm blib/lib/JSON/backportPP/Compat5006.pm [ 138s] cp lib/JSON/backportPP/Boolean.pm blib/lib/JSON/backportPP/Boolean.pm [ 138s] cp lib/JSON/backportPP/Compat5005.pm blib/lib/JSON/backportPP/Compat5005.pm [ 140s] Manifying 5 pod documents [ 140s] + exit 0 [ 141s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lq035f [ 141s] + umask 022 [ 141s] + cd /home/abuild/rpmbuild/BUILD [ 141s] + cd perl-json-4.02 [ 141s] + LANG=C [ 141s] + export LANG [ 141s] + unset DISPLAY [ 141s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 141s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 141s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 141s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm install_vendor [ 141s] Manifying 5 pod documents [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON.pm [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP.pm [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP/Compat5005.pm [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP/Boolean.pm [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP/Compat5006.pm [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man/man3/JSON::backportPP.3 [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man/man3/JSON::backportPP::Boolean.3 [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man/man3/JSON::backportPP::Compat5005.3 [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man/man3/JSON.3 [ 142s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man/man3/JSON::backportPP::Compat5006.3 [ 142s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/perllocal.pod [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/info [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/doc/packages [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/doc/perl-json [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/doc/perl-json-4.02 [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/gtk-doc [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/doc [ 143s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man [ 143s] + find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 143s] + xargs rm -f -- [ 143s] + find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 143s] + xargs rm -f -- [ 143s] + find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 143s] + xargs rm -f -- [ 143s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto [ 143s] + find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 143s] + xargs -0 -r rm [ 143s] + '[' armv7l == noarch ']' [ 143s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/5.32.0/armv7l-linux-thread-multi/perllocal.pod [ 143s] + FILES=perl-json.files [ 143s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0 -maxdepth 1 -type f [ 143s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON.pm [ 143s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON.pm ']' [ 143s] + for file in '$RES' [ 143s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON.pm [ 143s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/JSON.pm [ 143s] + /bin/cat [ 143s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ [ 143s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ -type d [ 143s] ++ sort [ 143s] + for dir in '`find ${base_dir} -type d | sort`' [ 143s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 143s] + continue [ 143s] + for dir in '`find ${base_dir} -type d | sort`' [ 143s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON = /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 143s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON [ 143s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 143s] + el=JSON [ 143s] + all_dir=(${all_dir[@]} $el) [ 143s] + for dir in '`find ${base_dir} -type d | sort`' [ 143s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP = /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 143s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP [ 143s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 143s] + el=JSON/backportPP [ 143s] + all_dir=(${all_dir[@]} $el) [ 143s] + for dir in '`find ${base_dir} -type d | sort`' [ 143s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 143s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi [ 143s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 143s] + el=armv7l-linux-thread-multi [ 143s] + all_dir=(${all_dir[@]} $el) [ 143s] + for dir in '`find ${base_dir} -type d | sort`' [ 143s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 143s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto [ 143s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 143s] + el=armv7l-linux-thread-multi/auto [ 143s] + all_dir=(${all_dir[@]} $el) [ 143s] + for dir in '`find ${base_dir} -type d | sort`' [ 143s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/JSON = /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ ']' [ 143s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/JSON [ 143s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0/ '{print $2}' [ 143s] + el=armv7l-linux-thread-multi/auto/JSON [ 143s] + all_dir=(${all_dir[@]} $el) [ 143s] + for i in '${all_dir[@]}' [ 143s] + '[' JSON = auto ']' [ 143s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/JSON = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 143s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON ']' [ 143s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON -maxdepth 1 -type f [ 143s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP.pm [ 143s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP.pm ']' [ 143s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/JSON [ 143s] + /bin/cat [ 143s] + for file in '$RES' [ 143s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP.pm [ 143s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP.pm [ 143s] + /bin/cat [ 143s] + for i in '${all_dir[@]}' [ 143s] + '[' JSON/backportPP = auto ']' [ 143s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 143s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP ']' [ 143s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP -maxdepth 1 -type f [ 143s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Compat5005.pm [ 143s] /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Boolean.pm [ 143s] /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Compat5006.pm' [ 143s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Compat5005.pm [ 143s] /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Boolean.pm [ 143s] /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Compat5006.pm' ']' [ 143s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP [ 143s] + /bin/cat [ 143s] + for file in '$RES' [ 143s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Compat5005.pm [ 143s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP/Compat5005.pm [ 143s] + /bin/cat [ 143s] + for file in '$RES' [ 143s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Boolean.pm [ 143s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP/Boolean.pm [ 143s] + /bin/cat [ 143s] + for file in '$RES' [ 143s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//JSON/backportPP/Compat5006.pm [ 143s] + fgen_file /usr/lib/perl5/vendor_perl/5.32.0/JSON/backportPP/Compat5006.pm [ 143s] + /bin/cat [ 143s] + for i in '${all_dir[@]}' [ 143s] + '[' armv7l-linux-thread-multi = auto ']' [ 143s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 143s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi ']' [ 143s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 143s] + RES= [ 143s] + '[' -n '' ']' [ 143s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi [ 143s] + /bin/cat [ 143s] + for i in '${all_dir[@]}' [ 143s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 143s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 143s] + continue [ 143s] + for i in '${all_dir[@]}' [ 143s] + '[' armv7l-linux-thread-multi/auto/JSON = auto ']' [ 143s] + '[' /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/JSON = /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto ']' [ 143s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/JSON ']' [ 143s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/lib/perl5/vendor_perl/5.32.0//armv7l-linux-thread-multi/auto/JSON -maxdepth 1 -type f [ 143s] + RES= [ 143s] + '[' -n '' ']' [ 143s] + fgen_dir /usr/lib/perl5/vendor_perl/5.32.0/armv7l-linux-thread-multi/auto/JSON [ 143s] + /bin/cat [ 143s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/share/man ']' [ 143s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/var/adm/perl-modules/perl-json ']' [ 143s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm/usr/bin ']' [ 143s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 4.02-1.1 --unique-debug-src-base perl-json-4.02-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-json-4.02 [ 143s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-json-4.02/perl-json-debuginfo.manifest [ 143s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-json-4.02/perl-json-debugsource.manifest [ 143s] + /usr/lib/rpm/check-buildroot [ 143s] + /usr/lib/rpm//brp-compress [ 143s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 143s] + /usr/lib/rpm/brp-python-hardlink [ 143s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 143s] Processing files: perl-json-4.02-1.1.armv7l [ 144s] Provides: perl(JSON) = 4.02 perl(JSON::Backend::PP) perl-json = 4.02-1.1 perl-json(armv7l-32) = 4.02-1.1 [ 144s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 144s] Processing files: perl-json-debugsource-4.02-1.1.armv7l [ 144s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/perl-json-4.02/debugsourcefiles.list [ 144s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 144s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 144s] [ 144s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 144s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-json-4.02-1.1.src.rpm [ 144s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-json-4.02-1.1.armv7l.rpm [ 144s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-json-debugsource-4.02-1.1.armv7l.rpm [ 144s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.nQi0yf [ 144s] + umask 022 [ 144s] + cd /home/abuild/rpmbuild/BUILD [ 144s] + cd perl-json-4.02 [ 144s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 144s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-json-4.02-1.1.arm [ 144s] + exit 0 [ 144s] ... checking for files with abuild user/group [ 144s] ... creating baselibs [ 145s] [ 145s] obsnw10 finished "build perl-json.spec" at Thu Oct 28 05:55:57 UTC 2021. [ 145s] Retried build at Thu Oct 28 21:21:54 2021 returned same result, skipped