[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw07 started "build _service:gbs:hal-api-codec.spec" at Fri Oct 29 04:49:53 UTC 2021. [ 0s] [ 0s] Building hal-api-codec for project 'Tizen:6.5:Unified' repository 'standard' arch 'aarch64' srcmd5 '937d4c48bf90279260196e5c985c3879' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-api-codec.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-api-codec.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-api-codec.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: girepository -> libgirepository [ 9s] breaking dependency libgirepository -> girepository [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/154] installing dlog-config-persistent-logs-6.5.8-1.1 [ 9s] [2/154] installing libmagic-data-5.39-1.50 [ 9s] [3/154] installing setup-0.9-1.1 [ 9s] [4/154] installing filesystem-3.1-1.1 [ 9s] [5/154] installing glibc-2.30-1.23 [ 10s] [6/154] installing bash-3.2.57-1.1 [ 10s] [7/154] installing capi-base-common-0.4.65-1.1 [ 10s] [8/154] installing cpio-2.8-1.1 [ 10s] [9/154] installing diffutils-3.3-1.1 [ 10s] [10/154] installing findutils-4.3.8-1.68 [ 10s] [11/154] installing gdbm-1.8.3-2.75 [ 11s] [12/154] installing hostname-3.23-1.1 [ 11s] [13/154] installing iniparser-4.1-1.1 [ 11s] [14/154] installing libasound-1.0.29-1.1 [ 12s] [15/154] installing libatomic-9.2.0-1.21 [ 12s] [16/154] installing libattr-2.4.48-1.79 [ 12s] [17/154] installing libblkid-2.36-1.1 [ 13s] [18/154] installing libbz2-1.0.8-1.75 [ 13s] [19/154] installing libcap-2.24-1.75 [ 13s] [20/154] installing libdrm-2.4.103-1.1 [ 14s] [21/154] installing libexpat-2.2.9-1.58 [ 14s] [22/154] installing libext2fs-1.46.0-1.2 [ 14s] [23/154] installing libffi-3.3-1.70 [ 15s] [24/154] installing libfreebl3-3.34.1-1.40 [ 15s] [25/154] installing libgcc-9.2.0-1.21 [ 15s] [26/154] installing libgomp-9.2.0-1.21 [ 16s] [27/154] installing libitm-9.2.0-1.21 [ 16s] [28/154] installing libjson-0.15-1.1 [ 16s] [29/154] installing libltdl-2.4.2-1.49 [ 17s] [30/154] installing liblua-5.1.5-1.26 [ 17s] [31/154] installing liblzma-5.2.5-1.58 [ 17s] [32/154] installing libogg-1.3.2-1.1 [ 18s] [33/154] installing libopenssl11-1.1.1k-1.34 [ 18s] [34/154] installing liborc-0.4.31-1.1 [ 18s] [35/154] installing libpcre-8.44-1.3 [ 19s] [36/154] installing libpopt-1.16-1.74 [ 19s] [37/154] installing libpython3_9m1_0-3.9.1-2.8 [ 19s] [38/154] installing libsmack-1.3.1-1.64 [ 20s] [39/154] installing libsmartcols-2.36-1.1 [ 20s] [40/154] installing libsqlite-3.33.0-1.58 [ 20s] [41/154] installing libuuid-2.36-1.1 [ 21s] [42/154] installing libzstd1-1.4.5-1.26 [ 21s] [43/154] installing m4-1.4.17-1.1 [ 21s] [44/154] installing net-tools-2.0_20121208git-1.1 [ 21s] [45/154] installing nspr-4.12-1.68 [ 22s] [46/154] installing patch-2.7-1.70 [ 22s] [47/154] installing pixman-0.38.4-1.1 [ 22s] [48/154] installing pkg-config-0.28-1.60 [ 22s] [49/154] installing sed-4.1c-2.1 [ 22s] [50/154] installing update-alternatives-1.20.5-1.1 [ 22s] [51/154] installing which-2.17-1.1 [ 22s] [52/154] installing zlib-1.2.11-1.73 [ 22s] [53/154] installing build-compare-2015.04.28-1.18 [ 22s] [54/154] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 24s] [55/154] installing terminfo-base-full-6.2-1.45 [ 24s] [56/154] installing capi-base-common-devel-0.4.65-1.1 [ 24s] [57/154] installing coreutils-6.9-1.10 [ 24s] [58/154] installing cpp-9.2.0-1.21 [ 25s] [59/154] installing gawk-3.1.5-1.1 [ 25s] [60/154] installing gcc-c++-9.2.0-1.21 [ 26s] [61/154] installing grep-2.5.2-2.1 [ 26s] [62/154] installing iniparser-devel-4.1-1.1 [ 26s] [63/154] installing libacl-2.2.53-1.78 [ 26s] [64/154] installing libblkid-devel-2.36-1.1 [ 27s] [65/154] installing libelf-0.178-1.44 [ 27s] [66/154] installing libffi-devel-3.3-1.70 [ 27s] [67/154] installing libgfortran-9.2.0-1.21 [ 27s] [68/154] installing libglib-2.62.3-1.1 [ 28s] [69/154] installing libmount-2.36-1.1 [ 28s] [70/154] installing libpcreposix-8.44-1.3 [ 28s] [71/154] installing libpng-1.6.37-1.1 [ 29s] [72/154] installing libstdc++-9.2.0-1.21 [ 29s] [73/154] installing libtheora-1.1.1-1.1 [ 29s] [74/154] installing libvorbis-1.3.7-1.1 [ 30s] [75/154] installing make-4.0-1.8 [ 30s] [76/154] installing nss-certs-3.34.1-1.40 [ 30s] [77/154] installing opus-1.3.1-1.1 [ 30s] [78/154] installing smack-1.3.1-1.64 [ 30s] [79/154] installing bzip2-1.0.8-1.75 [ 30s] [80/154] installing libfdisk-2.36-1.1 [ 31s] [81/154] installing libmagic-5.39-1.50 [ 31s] [82/154] installing libxml2-2.9.12-1.17 [ 32s] [83/154] installing orc-0.4.31-1.1 [ 32s] [84/154] installing perl-5.32.0-1.26 [ 34s] [85/154] installing xz-5.2.5-1.58 [ 34s] [86/154] installing build-mkbaselibs-20120927-1.1 [ 34s] [87/154] installing libstdc++-devel-9.2.0-1.21 [ 35s] [88/154] installing file-5.39-1.50 [ 35s] [89/154] installing libgmodule-2.62.3-1.1 [ 35s] [90/154] installing libgthread-2.62.3-1.1 [ 35s] [91/154] installing linux-glibc-devel-3.10-1.80 [ 36s] [92/154] installing tar-1.17-2.1 [ 36s] [93/154] installing autoconf-2.69-1.33 [ 36s] [94/154] installing binutils-2.33.1-1.28 [ 37s] [95/154] installing glibc-locale-2.30-1.23 [ 37s] [96/154] installing gtest-1.10.0-1.1 [ 38s] [97/154] installing gzip-1.3.12-2.73 [ 38s] [98/154] installing libcc1-9.2.0-1.21 [ 38s] [99/154] installing libgobject-2.62.3-1.1 [ 38s] [100/154] installing libmount-devel-2.36-1.1 [ 39s] [101/154] installing libubsan-9.2.0-1.21 [ 39s] [102/154] installing libvorbisenc-1.3.7-1.1 [ 39s] [103/154] installing pam-1.1.6-1.1 [ 40s] [104/154] installing libncurses6-6.2-1.45 [ 40s] [105/154] installing libpcrecpp-8.44-1.3 [ 40s] [106/154] installing tzdata-2020a-1.1 [ 41s] [107/154] installing dlog-6.5.8-1.1 [ 41s] [108/154] installing libdw-0.178-1.44 [ 41s] [109/154] installing libarchive-3.5.1-1.47 [ 42s] [110/154] installing shared-mime-info-1.7-1.1 [ 47s] [111/154] installing libncurses-6.2-1.45 [ 47s] [112/154] installing dlog-logger-6.5.8-1.1 [ 47s] [113/154] installing glibc-devel-2.30-1.23 [ 47s] [114/154] installing gtest-devel-1.10.0-1.1 [ 47s] [115/154] installing less-466-1.1 [ 47s] [116/154] installing libreadline-5.2-1.21 [ 47s] [117/154] installing procps-ng-3.3.16-1.1 [ 48s] [118/154] installing automake-1.15.1-1.37 [ 48s] [119/154] installing libasm-0.178-1.44 [ 48s] [120/154] installing build-20120927-1.1 [ 48s] [121/154] installing pcre-devel-8.44-1.3 [ 48s] [122/154] installing gcc-9.2.0-1.21 [ 49s] [123/154] installing qemu-accel-x86_64-aarch64-0.4-2.3 [ 56s] [124/154] installing zlib-devel-1.2.11-1.73 [ 56s] [125/154] installing libtool-2.4.2-1.49 [ 56s] [126/154] installing elfutils-0.178-1.44 [ 56s] [127/154] installing libdlog-6.5.8-1.1 [ 57s] [128/154] installing python3-base-3.9.1-2.8 [ 58s] [129/154] installing util-linux-2.36-1.1 [ 58s] [130/154] installing python3-3.9.1-1.3 [ 58s] [131/154] installing libdlog-devel-6.5.8-1.1 [ 58s] [132/154] installing libwayland-client-1.18.92-1.1 [ 58s] [133/154] installing libwayland-server-1.18.92-1.1 [ 59s] [134/154] installing util-linux-su-2.36-1.1 [ 59s] [135/154] installing cmake-3.16.4-1.1 [ 60s] [136/154] installing nss-3.34.1-1.40 [ 60s] [137/154] installing libgio-2.62.3-1.1 [ 61s] [138/154] installing gio-branding-upstream-2.62.3-1.1 [ 61s] [139/154] installing libsoftokn3-3.34.1-1.40 [ 61s] [140/154] installing glib2-tools-2.62.3-1.1 [ 61s] [141/154] installing hal-api-common-0.0.1-1.1 [ 61s] /opt/etc/hal: No such file or directory [ 61s] /opt/etc/hal: No such file or directory [ 61s] /var/tmp/rpm-tmp.Na92K1: line 3: systemd-tmpfiles: command not found [ 61s] warning: %post(hal-api-common-0.0.1-1.1.aarch64) scriptlet failed, exit status 127 [ 61s] [142/154] installing libgirepository-1.66.0-1.1 [ 62s] [143/154] installing rpm-4.14.1.1-1.45 [ 62s] [144/154] installing girepository-1.66.0-1.1 [ 62s] [145/154] installing hal-api-tbm-0.0.5-1.1 [ 63s] [146/154] installing glib2-devel-2.62.3-1.1 [ 63s] [147/154] installing rpm-build-4.14.1.1-1.45 [ 63s] [148/154] installing gstreamer-1.16.2-1.1 [ 63s] [149/154] installing libtbm-4.1.10-1.1 [ 64s] [150/154] installing libtbm-devel-4.1.10-1.1 [ 64s] [151/154] installing gstreamer-utils-1.16.2-1.1 [ 64s] [152/154] installing gst-plugins-base-1.16.2-1.1 [ 64s] [153/154] installing gstreamer-devel-1.16.2-1.1 [ 65s] [154/154] installing gst-plugins-base-devel-1.16.2-1.1 [ 65s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 65s] now finalizing build dir... [ 65s] Running build time source services... [ 66s] build target is aarch64-tizen-linux [ 66s] ----------------------------------------------------------------- [ 66s] I have the following modifications for hal-api-codec.spec: [ 66s] 10c10 [ 66s] < Release: 0 [ 66s] --- [ 66s] > Release: 1.1 [ 66s] ----------------------------------------------------------------- [ 66s] ----- building hal-api-codec.spec (user abuild) [ 66s] ----------------------------------------------------------------- [ 66s] ----------------------------------------------------------------- [ 66s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/937d4c48bf90279260196e5c985c3879-hal-api-codec' -ba /home/abuild/rpmbuild/SOURCES/hal-api-codec.spec [ 66s] Building target platforms: aarch64-tizen-linux [ 66s] Building for target aarch64-tizen-linux [ 66s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.CdCQC8 [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + rm -rf hal-api-codec-0.0.2 [ 66s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-api-codec-0.0.2.tar.gz [ 66s] + /bin/tar -xof - [ 66s] + STATUS=0 [ 66s] + '[' 0 -ne 0 ']' [ 66s] + cd hal-api-codec-0.0.2 [ 66s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 66s] + export 'CXXFLAGS+= -D_LARGEFILE64_SOURCE -DSYSCONFDIR=\"/hal/etc\" -DTEST_FILES_PATH=\"/usr/share/testcase/res/codec\"' [ 66s] + CXXFLAGS+=' -D_LARGEFILE64_SOURCE -DSYSCONFDIR=\"/hal/etc\" -DTEST_FILES_PATH=\"/usr/share/testcase/res/codec\"' [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS=' -D_LARGEFILE64_SOURCE -DSYSCONFDIR=\"/hal/etc\" -DTEST_FILES_PATH=\"/usr/share/testcase/res/codec\"' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 66s] + export FFLAGS [ 66s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_LIBDIR_PREFIX=/usr/lib64 -DTESTCASE_RES_DIR=/usr/share/testcase/res/codec [ 66s] CMake Warning (dev) in CMakeLists.txt: [ 66s] No project() command is present. The top-level CMakeLists.txt file must [ 66s] contain a literal, direct call to the project() command. Add a line of [ 66s] code such as [ 66s] [ 66s] project(ProjectName) [ 66s] [ 66s] near the top of the file, but after cmake_minimum_required(). [ 66s] [ 66s] CMake is pretending there is a "project(Project)" command on the first [ 66s] line. [ 66s] This warning is for project developers. Use -Wno-dev to suppress it. [ 66s] [ 66s] -- The C compiler identification is GNU 9.2.0 [ 66s] -- The CXX compiler identification is GNU 9.2.0 [ 66s] -- Check for working C compiler: /bin/cc [ 66s] -- Check for working C compiler: /bin/cc -- works [ 66s] -- Detecting C compiler ABI info [ 66s] -- Detecting C compiler ABI info - done [ 66s] -- Detecting C compile features [ 66s] -- Detecting C compile features - done [ 66s] -- Check for working CXX compiler: /bin/c++ [ 66s] -- Check for working CXX compiler: /bin/c++ -- works [ 66s] -- Detecting CXX compiler ABI info [ 66s] -- Detecting CXX compiler ABI info - done [ 66s] -- Detecting CXX compile features [ 66s] -- Detecting CXX compile features - done [ 66s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 66s] -- Checking for modules 'glib-2.0;gmock;gstreamer-1.0;gstreamer-plugins-base-1.0;iniparser;libtbm' [ 67s] -- Found glib-2.0, version 2.62.3 [ 67s] -- Found gmock, version 1.10.0 [ 67s] -- Found gstreamer-1.0, version 1.16.2 [ 67s] -- Found gstreamer-plugins-base-1.0, version 1.16.2 [ 67s] -- Found iniparser, version 4.1 [ 67s] -- Found libtbm, version 3.0.0 [ 68s] -- Configuring done [ 68s] -- Generating done [ 68s] CMake Warning: [ 68s] Manually-specified variables were not used by the project: [ 68s] [ 68s] BUILD_SHARED_LIBS [ 68s] CMAKE_INSTALL_LIBDIR [ 68s] CMAKE_LIBDIR_PREFIX [ 68s] INCLUDE_INSTALL_DIR [ 68s] LIB_INSTALL_DIR [ 68s] LIB_SUFFIX [ 68s] SHARE_INSTALL_PREFIX [ 68s] SYSCONF_INSTALL_DIR [ 68s] TESTCASE_RES_DIR [ 68s] [ 68s] [ 68s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 [ 68s] + exit 0 [ 68s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.AlwyA6 [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd hal-api-codec-0.0.2 [ 68s] ++ uname -m [ 68s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 68s] + ref=/usr/lib/rpm [ 68s] + for s in guess sub [ 68s] ++ find -maxdepth 8 -name config.guess [ 68s] + for s in guess sub [ 68s] ++ find -maxdepth 8 -name config.sub [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 68s] + export CFLAGS [ 68s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 68s] + export CXXFLAGS [ 68s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 68s] + export FFLAGS [ 68s] + LDFLAGS= [ 68s] + export LDFLAGS [ 68s] + make -j8 [ 68s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 -B/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 --check-build-system CMakeFiles/Makefile.cmake 0 [ 68s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/CMakeFiles/progress.marks [ 68s] make -f CMakeFiles/Makefile2 all [ 68s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 68s] make -f tests/CMakeFiles/codec-haltests.dir/build.make tests/CMakeFiles/codec-haltests.dir/depend [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 68s] cd /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests/CMakeFiles/codec-haltests.dir/DependInfo.cmake --color= [ 68s] Scanning dependencies of target codec-haltests [ 68s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 68s] make -f tests/CMakeFiles/codec-haltests.dir/build.make tests/CMakeFiles/codec-haltests.dir/build [ 68s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 68s] [ 50%] Building CXX object tests/CMakeFiles/codec-haltests.dir/codec_hal_test.cpp.o [ 68s] cd /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests && /bin/c++ -D_LARGEFILE64_SOURCE -DSYSCONFDIR=\"/hal/etc\" -DTEST_FILES_PATH=\"/usr/share/testcase/res/codec\" -std=c++14 -Wall -Werror -DGTEST_HAS_PTHREAD=1 -lpthread -DGTEST_HAS_PTHREAD=1 -lpthread -pthread -I/usr/lib64/pkgconfig/../../include -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fPIC -pie -Wall -fPIE -o CMakeFiles/codec-haltests.dir/codec_hal_test.cpp.o -c /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests/codec_hal_test.cpp [ 69s] [100%] Linking CXX executable codec-haltests [ 69s] cd /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests && /usr/bin/cmake -E cmake_link_script CMakeFiles/codec-haltests.dir/link.txt --verbose=1 [ 69s] /bin/c++ -D_LARGEFILE64_SOURCE -DSYSCONFDIR=\"/hal/etc\" -DTEST_FILES_PATH=\"/usr/share/testcase/res/codec\" -std=c++14 -Wall -Werror -DGTEST_HAS_PTHREAD=1 -lpthread -DGTEST_HAS_PTHREAD=1 -lpthread -pthread -I/usr/lib64/pkgconfig/../../include -I/usr/include/gstreamer-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -fPIC -pie -Wall -rdynamic -pie CMakeFiles/codec-haltests.dir/codec_hal_test.cpp.o -o codec-haltests -L/usr/lib64/pkgconfig/../..//usr/lib64 -lgmock -lpthread -lgtest -lpthread -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -liniparser -ltbm -lcapi-base-common -lgtest -lgstreamer-1.0 -lgobject-2.0 -lglib-2.0 -liniparser -ltbm -lcapi-base-common [ 69s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] [100%] Built target codec-haltests [ 69s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/CMakeFiles 0 [ 69s] + exit 0 [ 69s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ZglDq6 [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd hal-api-codec-0.0.2 [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 69s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 69s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 69s] + install -d -m 755 /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64/usr/share/testcase/res/codec [ 69s] + install -m 644 tests/res/meerkat.mp4 tests/res/mv.MP4 tests/res/she.3gp /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64/usr/share/testcase/res/codec [ 69s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 install [ 69s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 -B/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 --check-build-system CMakeFiles/Makefile.cmake 0 [ 69s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/CMakeFiles/progress.marks [ 69s] /bin/make -f CMakeFiles/Makefile2 all [ 69s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] /bin/make -f tests/CMakeFiles/codec-haltests.dir/build.make tests/CMakeFiles/codec-haltests.dir/depend [ 69s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] cd /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/tests/CMakeFiles/codec-haltests.dir/DependInfo.cmake --color= [ 69s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] /bin/make -f tests/CMakeFiles/codec-haltests.dir/build.make tests/CMakeFiles/codec-haltests.dir/build [ 69s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] make[2]: Nothing to be done for 'tests/CMakeFiles/codec-haltests.dir/build'. [ 69s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] [100%] Built target codec-haltests [ 69s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/CMakeFiles 0 [ 69s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 69s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] make[1]: Nothing to be done for 'preinstall'. [ 69s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2' [ 69s] Install the project... [ 69s] /usr/bin/cmake -P cmake_install.cmake [ 69s] -- Install configuration: "" [ 69s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64/usr/bin/hal/codec-haltests [ 69s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64/usr/share/info/dir [ 69s] + find /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 -regex '.*\.la$' [ 69s] + xargs rm -f -- [ 69s] + find /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 -regex '.*\.a$' [ 69s] + xargs rm -f -- [ 69s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.0.2-1.1 --unique-debug-src-base hal-api-codec-0.0.2-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2 [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64/usr/bin/hal/codec-haltests [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/hal-api-codec-debuginfo.manifest [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/hal-api-codec-debugsource.manifest [ 70s] + /usr/lib/rpm/check-buildroot [ 70s] + /usr/lib/rpm//brp-compress [ 70s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 70s] + /usr/lib/rpm/brp-python-hardlink [ 70s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 70s] Processing files: hal-api-codec-debugsource-0.0.2-1.1.aarch64 [ 70s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/hal-api-codec-0.0.2/debugsourcefiles.list [ 70s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 70s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 70s] [ 70s] Processing files: hal-api-codec-haltests-0.0.2-1.1.aarch64 [ 70s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 70s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 70s] [ 70s] Provides: hal-api-codec-haltests = 0.0.2-1.1 hal-api-codec-haltests(aarch-64) = 0.0.2-1.1 [ 70s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 70s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcapi-base-common.so.0()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libglib-2.0.so.0()(64bit) libgmock.so()(64bit) libgobject-2.0.so.0()(64bit) libgstreamer-1.0.so.0()(64bit) libgtest.so()(64bit) libiniparser.so.1()(64bit) libm.so.6()(64bit) libpthread.so.0()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.26)(64bit) libtbm.so.1()(64bit) [ 70s] Processing files: hal-api-codec-haltests-debuginfo-0.0.2-1.1.aarch64 [ 70s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 70s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 70s] [ 70s] Provides: hal-api-codec-haltests-debuginfo = 0.0.2-1.1 hal-api-codec-haltests-debuginfo(aarch-64) = 0.0.2-1.1 [ 70s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 70s] Recommends: hal-api-codec-debugsource(aarch-64) = 0.0.2-1.1 [ 70s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 72s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-api-codec-0.0.2-1.1.src.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-api-codec-debugsource-0.0.2-1.1.aarch64.rpm [ 82s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-api-codec-haltests-0.0.2-1.1.aarch64.rpm [ 82s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-api-codec-haltests-debuginfo-0.0.2-1.1.aarch64.rpm [ 82s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.m8ki29 [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd hal-api-codec-0.0.2 [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-api-codec-0.0.2-1.1.aarch64 [ 82s] + exit 0 [ 82s] ... checking for files with abuild user/group [ 82s] ... creating baselibs [ 83s] [ 83s] obspw07 finished "build hal-api-codec.spec" at Fri Oct 29 04:51:16 UTC 2021. [ 83s] Retried build at Wed Nov 10 10:54:20 2021 returned same result, skipped Retried build at Wed Nov 10 13:20:59 2021 returned same result, skipped Retried build at Tue Nov 16 04:48:21 2021 returned same result, skipped Retried build at Wed Nov 17 03:23:35 2021 returned same result, skipped Retried build at Thu Nov 25 07:21:00 2021 returned same result, skipped Retried build at Sun Dec 5 22:26:12 2021 returned same result, skipped Retried build at Thu Dec 9 21:52:39 2021 returned same result, skipped Retried build at Tue Dec 14 13:11:37 2021 returned same result, skipped Retried build at Tue Dec 14 15:20:46 2021 returned same result, skipped Retried build at Wed Dec 22 13:24:40 2021 returned same result, skipped Retried build at Sun Jan 16 22:14:06 2022 returned same result, skipped Retried build at Mon Jan 24 14:12:56 2022 returned same result, skipped Retried build at Wed Jan 26 14:36:18 2022 returned same result, skipped Retried build at Fri Jan 28 15:55:45 2022 returned same result, skipped Retried build at Wed Feb 9 14:05:06 2022 returned same result, skipped Retried build at Sun Feb 20 22:29:52 2022 returned same result, skipped Retried build at Wed Apr 6 11:23:56 2022 returned same result, skipped Retried build at Fri Apr 22 14:17:25 2022 returned same result, skipped Retried build at Mon May 16 13:47:50 2022 returned same result, skipped Retried build at Thu May 26 02:03:21 2022 returned same result, skipped Retried build at Tue May 31 05:30:24 2022 returned same result, skipped Retried build at Fri Jun 3 14:25:19 2022 returned same result, skipped Retried build at Fri Jun 10 15:12:57 2022 returned same result, skipped