[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw01 started "build _service:gbs:hal-backend-device-common.spec" at Thu Jun 2 13:17:36 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-common for project 'Tizen:6.5:Unified' repository 'standard' arch 'aarch64' srcmd5 'a2b66c495ecc63ee0f0f5ec32cc78ce2' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-common.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-common.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-common.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/146] installing dlog-config-persistent-logs-6.5.9-5.4 [ 9s] [2/146] installing libmagic-data-5.39-2.52 [ 9s] [3/146] installing setup-0.9-3.1 [ 9s] [4/146] installing filesystem-3.1-1.1 [ 9s] [5/146] installing glibc-2.30-2.10 [ 10s] [6/146] installing bash-3.2.57-2.1 [ 10s] [7/146] installing capi-base-common-0.4.67-3.1 [ 10s] [8/146] installing cpio-2.8-1.1 [ 10s] [9/146] installing diffutils-3.3-1.1 [ 10s] [10/146] installing findutils-4.3.8-2.61 [ 10s] [11/146] installing gdbm-1.8.3-2.140 [ 11s] [12/146] installing hostname-3.23-1.1 [ 11s] [13/146] installing iniparser-4.1-1.1 [ 11s] [14/146] installing libatomic-9.2.0-1.46 [ 11s] [15/146] installing libattr-2.4.48-1.142 [ 12s] [16/146] installing libblkid-2.36-1.7 [ 12s] [17/146] installing libbz2-1.0.8-2.24 [ 12s] [18/146] installing libcap-2.24-2.64 [ 13s] [19/146] installing libexpat-2.2.9-2.9 [ 13s] [20/146] installing libext2fs-1.46.0-1.8 [ 13s] [21/146] installing libffi-3.3-1.132 [ 14s] [22/146] installing libfreebl3-3.34.1-1.91 [ 14s] [23/146] installing libgcc-9.2.0-1.46 [ 14s] [24/146] installing libgomp-9.2.0-1.46 [ 15s] [25/146] installing libitm-9.2.0-1.46 [ 15s] [26/146] installing libjson-0.15-1.1 [ 15s] [27/146] installing libltdl-2.4.2-1.97 [ 16s] [28/146] installing liblua-5.1.5-1.46 [ 16s] [29/146] installing liblzma-5.2.5-3.10 [ 16s] [30/146] installing libopenssl11-1.1.1l-2.50 [ 17s] [31/146] installing libpcre-8.44-1.8 [ 17s] [32/146] installing libpopt-1.16-1.135 [ 18s] [33/146] installing libpython3_9m1_0-3.9.1-2.15 [ 18s] [34/146] installing libsmack-1.3.1-2.60 [ 18s] [35/146] installing libsmartcols-2.36-1.7 [ 19s] [36/146] installing libsqlite-3.33.0-1.114 [ 19s] [37/146] installing libuuid-2.36-1.7 [ 19s] [38/146] installing libzstd1-1.4.5-1.82 [ 20s] [39/146] installing m4-1.4.17-1.1 [ 20s] [40/146] installing net-tools-2.0_20121208git-1.1 [ 20s] [41/146] installing nspr-4.12-1.129 [ 20s] [42/146] installing patch-2.7-2.18 [ 20s] [43/146] installing pkg-config-0.28-1.120 [ 20s] [44/146] installing sed-4.1c-2.1 [ 20s] [45/146] installing update-alternatives-1.20.5-1.1 [ 20s] [46/146] installing which-2.17-1.1 [ 20s] [47/146] installing zlib-1.2.11-1.136 [ 21s] [48/146] installing shadow-utils-4.1.4.2-2.9 [ 21s] [49/146] installing build-compare-2015.04.28-1.38 [ 21s] [50/146] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 22s] [51/146] installing terminfo-base-full-6.2-1.98 [ 22s] [52/146] installing capi-base-common-devel-0.4.67-3.1 [ 23s] [53/146] installing coreutils-6.9-1.28 [ 23s] [54/146] installing cpp-9.2.0-1.46 [ 23s] [55/146] installing gawk-3.1.5-1.1 [ 24s] [56/146] installing gcc-c++-9.2.0-1.46 [ 24s] [57/146] installing grep-2.5.2-2.1 [ 24s] [58/146] installing libacl-2.2.53-1.142 [ 25s] [59/146] installing libblkid-devel-2.36-1.7 [ 25s] [60/146] installing libcap-tools-2.24-2.64 [ 25s] [61/146] installing libelf-0.178-2.20 [ 25s] [62/146] installing libffi-devel-3.3-1.132 [ 25s] [63/146] installing libgfortran-9.2.0-1.46 [ 26s] [64/146] installing libglib-2.62.3-1.19 [ 26s] [65/146] installing libmount-2.36-1.7 [ 26s] [66/146] installing libpcreposix-8.44-1.8 [ 27s] [67/146] installing libstdc++-9.2.0-1.46 [ 27s] [68/146] installing make-4.0-1.23 [ 27s] [69/146] installing nss-certs-3.34.1-1.91 [ 27s] [70/146] installing smack-1.3.1-2.60 [ 27s] [71/146] installing bzip2-1.0.8-2.24 [ 27s] [72/146] installing libfdisk-2.36-1.7 [ 28s] [73/146] installing libmagic-5.39-2.52 [ 28s] [74/146] installing libxml2-2.9.12-1.34 [ 28s] [75/146] installing perl-5.32.0-2.8 [ 31s] [76/146] installing xz-5.2.5-3.10 [ 31s] [77/146] installing libkmod-28-1.1 [ 31s] [78/146] installing build-mkbaselibs-20120927-1.1 [ 31s] [79/146] installing libstdc++-devel-9.2.0-1.46 [ 32s] [80/146] installing acl-2.2.53-1.142 [ 32s] [81/146] installing file-5.39-2.52 [ 32s] [82/146] installing libgmodule-2.62.3-1.19 [ 32s] [83/146] installing libgthread-2.62.3-1.19 [ 33s] [84/146] installing linux-glibc-devel-3.10-1.147 [ 33s] [85/146] installing tar-1.17-2.1 [ 33s] [86/146] installing autoconf-2.69-1.101 [ 34s] [87/146] installing binutils-2.33.1-2.12 [ 34s] [88/146] installing glibc-locale-2.30-2.10 [ 35s] [89/146] installing gzip-1.3.12-2.135 [ 35s] [90/146] installing libcc1-9.2.0-1.46 [ 35s] [91/146] installing libconfig-1.6-2.1 [ 35s] [92/146] installing libgobject-2.62.3-1.19 [ 36s] [93/146] installing libmount-devel-2.36-1.7 [ 36s] [94/146] installing libubsan-9.2.0-1.46 [ 36s] [95/146] installing pam-1.1.6-1.1 [ 37s] [96/146] installing libncurses6-6.2-1.98 [ 37s] [97/146] installing libpcrecpp-8.44-1.8 [ 37s] [98/146] installing tzdata-2020a-4.1 [ 38s] [99/146] installing dlog-6.5.9-5.4 [ 38s] [100/146] installing libdw-0.178-2.20 [ 38s] [101/146] installing security-config-1.0-8.1 [ 44s] groupadd: group 'dbus' already exists [ 44s] groupadd: group 'priv_appdebugging' already exists [ 44s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 44s] [102/146] installing libarchive-3.5.1-2.18 [ 44s] [103/146] installing shared-mime-info-1.7-1.1 [ 49s] [104/146] installing libncurses-6.2-1.98 [ 49s] [105/146] installing dlog-logger-6.5.9-5.4 [ 49s] [106/146] installing glibc-devel-2.30-2.10 [ 50s] [107/146] installing less-466-1.1 [ 50s] [108/146] installing libconfig-devel-1.6-2.1 [ 50s] [109/146] installing libreadline-5.2-1.39 [ 50s] [110/146] installing libusbgx-0.1.0-2.1 [ 50s] [111/146] installing procps-ng-3.3.16-1.1 [ 51s] [112/146] installing automake-1.15.1-1.91 [ 51s] [113/146] installing libasm-0.178-2.20 [ 51s] [114/146] installing build-20120927-1.1 [ 51s] [115/146] installing libsystemd-244-8.1 [ 52s] [116/146] installing pcre-devel-8.44-1.8 [ 52s] [117/146] installing gcc-9.2.0-1.46 [ 53s] [118/146] installing qemu-accel-x86_64-aarch64-0.4-2.12 [ 59s] [119/146] installing libusbgx-devel-0.1.0-2.1 [ 60s] [120/146] installing zlib-devel-1.2.11-1.136 [ 60s] [121/146] installing libtool-2.4.2-1.97 [ 60s] [122/146] installing elfutils-0.178-2.20 [ 60s] [123/146] installing libdlog-6.5.9-5.4 [ 60s] [124/146] installing python3-base-3.9.1-2.15 [ 61s] [125/146] installing util-linux-2.36-1.7 [ 61s] [126/146] installing python3-3.9.1-1.14 [ 61s] [127/146] installing libdlog-devel-6.5.9-5.4 [ 61s] [128/146] installing util-linux-su-2.36-1.7 [ 62s] [129/146] installing capi-system-info-0.5.2-5.1 [ 62s] Running capi-system-info %posttrans script [ 62s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 62s] iniparser: cannot open /etc/info.ini [ 62s] [130/146] installing cmake-3.16.4-1.1 [ 63s] [131/146] installing systemd-244-8.1 [ 65s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 65s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 65s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 65s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 65s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 65s] [132/146] installing capi-system-info-devel-0.5.2-5.1 [ 65s] [133/146] installing systemd-devel-244-8.1 [ 65s] [134/146] installing nss-3.34.1-1.91 [ 65s] [135/146] installing libgio-2.62.3-1.19 [ 66s] [136/146] installing gio-branding-upstream-2.62.3-1.19 [ 66s] [137/146] installing libsoftokn3-3.34.1-1.91 [ 66s] [138/146] installing glib2-tools-2.62.3-1.19 [ 66s] [139/146] installing hal-api-common-0.0.1-3.1 [ 66s] [140/146] installing libsyscommon-4.1-6.1 [ 66s] [141/146] installing rpm-4.14.1.1-1.66 [ 67s] [142/146] installing hal-api-device-1.0.0-8.1 [ 67s] [143/146] installing glib2-devel-2.62.3-1.19 [ 67s] [144/146] installing rpm-build-4.14.1.1-1.66 [ 68s] [145/146] installing hal-api-device-devel-1.0.0-8.1 [ 68s] [146/146] installing libsyscommon-devel-4.1-6.1 [ 68s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 68s] now finalizing build dir... [ 68s] Running build time source services... [ 68s] build target is aarch64-tizen-linux [ 68s] ----------------------------------------------------------------- [ 68s] I have the following modifications for hal-backend-device-common.spec: [ 68s] 5c5 [ 68s] < Release: 1 [ 68s] --- [ 68s] > Release: 4.1 [ 68s] ----------------------------------------------------------------- [ 68s] ----- building hal-backend-device-common.spec (user abuild) [ 68s] ----------------------------------------------------------------- [ 68s] ----------------------------------------------------------------- [ 68s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-common.spec [ 68s] Building target platforms: aarch64-tizen-linux [ 68s] Building for target aarch64-tizen-linux [ 68s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oZEDS0 [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + rm -rf hal-backend-device-common-1 [ 68s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-common-1.tar.gz [ 68s] + /bin/tar -xof - [ 68s] + STATUS=0 [ 68s] + '[' 0 -ne 0 ']' [ 68s] + cd hal-backend-device-common-1 [ 68s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 68s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-common.manifest . [ 69s] + exit 0 [ 69s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tYJNUZ [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd hal-backend-device-common-1 [ 69s] ++ uname -m [ 69s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 69s] + ref=/usr/lib/rpm [ 69s] + for s in guess sub [ 69s] ++ find -maxdepth 8 -name config.guess [ 69s] + for s in guess sub [ 69s] ++ find -maxdepth 8 -name config.sub [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + LDFLAGS= [ 69s] + export LDFLAGS [ 69s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DHAL_LIB_DIR=/hal/lib64 -DHAL_INCLUDE_DIR=/hal/include -DHAL_LICENSE_DIR=/hal/share/licenses -DENABLE_DLOG=on [ 69s] -- The C compiler identification is GNU 9.2.0 [ 69s] -- Check for working C compiler: /bin/cc [ 69s] -- Check for working C compiler: /bin/cc -- works [ 69s] -- Detecting C compiler ABI info [ 69s] -- Detecting C compiler ABI info - done [ 69s] -- Detecting C compile features [ 69s] -- Detecting C compile features - done [ 69s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 69s] -- Checking for modules 'libusbgx;libsyscommon;dlog;libudev' [ 69s] -- Found libusbgx, version 0.1.0 [ 69s] -- Found libsyscommon, version 4.1 [ 69s] -- Found dlog, version 1.0 [ 69s] -- Found libudev, version 244 [ 70s] -- Configuring done [ 70s] -- Generating done [ 70s] CMake Warning: [ 70s] Manually-specified variables were not used by the project: [ 70s] [ 70s] CMAKE_INSTALL_LIBDIR [ 70s] INCLUDE_INSTALL_DIR [ 70s] LIB_SUFFIX [ 70s] SHARE_INSTALL_PREFIX [ 70s] SYSCONF_INSTALL_DIR [ 70s] [ 70s] [ 70s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 [ 70s] + make -j8 [ 70s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 70s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/progress.marks [ 70s] make -f CMakeFiles/Makefile2 all [ 70s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/depend [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/hal-backend-device-common.dir/DependInfo.cmake --color= [ 70s] Scanning dependencies of target hal-backend-device-common [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/build [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] [ 50%] Building C object CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o [ 70s] /bin/cc -DFEATURE_DLOG -D_GNU_SOURCE -Dhal_backend_device_common_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/system -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/src/udev/udev.c [ 70s] [100%] Linking C shared library libhal-backend-device-common.so [ 70s] /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-common.dir/link.txt --verbose=1 [ 70s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/dlog -I/usr/include/system -I/usr/include/dlog -fvisibility=hidden -shared -Wl,-soname,libhal-backend-device-common.so -o libhal-backend-device-common.so CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -lusbgx -lconfig -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ldlog -lcapi-system-info -lcapi-base-common -ldlog -ludev -lcapi-system-info -lcapi-base-common -ludev [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] [100%] Built target hal-backend-device-common [ 70s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles 0 [ 70s] + exit 0 [ 70s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.2E9xFX [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd hal-backend-device-common-1 [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 [ 70s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 [ 70s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 install [ 70s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 70s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/progress.marks [ 70s] /bin/make -f CMakeFiles/Makefile2 all [ 70s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] /bin/make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/depend [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/hal-backend-device-common.dir/DependInfo.cmake --color= [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] /bin/make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/build [ 70s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] make[2]: Nothing to be done for 'CMakeFiles/hal-backend-device-common.dir/build'. [ 70s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] [100%] Built target hal-backend-device-common [ 70s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles 0 [ 70s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 70s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] make[1]: Nothing to be done for 'preinstall'. [ 70s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 70s] Install the project... [ 70s] /usr/bin/cmake -P cmake_install.cmake [ 70s] -- Install configuration: "" [ 70s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/hal/lib64/libhal-backend-device-common.so [ 70s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/hal/share/licenses/hal-backend-device-common/LICENSE.Apache-2.0 [ 70s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/hal/include/device/hal-backend-common.h [ 70s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/hal/include/device/hal-backend-common-udev.h [ 70s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/usr/lib64/pkgconfig/hal-backend-device-common.pc [ 70s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/usr/share/info/dir [ 70s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 -regex '.*\.la$' [ 70s] + xargs rm -f -- [ 70s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 -regex '.*\.a$' [ 70s] + xargs rm -f -- [ 70s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1-4.1 --unique-debug-src-base hal-backend-device-common-1-4.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64/hal/lib64/libhal-backend-device-common.so [ 70s] 15 blocks [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/hal-backend-device-common-debuginfo.manifest [ 70s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/hal-backend-device-common-debugsource.manifest [ 70s] + /usr/lib/rpm/check-buildroot [ 70s] + /usr/lib/rpm//brp-compress [ 70s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 71s] + /usr/lib/rpm/brp-python-hardlink [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 [ 71s] Processing files: hal-backend-device-common-1-4.1.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: hal-backend-device-common = 1-4.1 hal-backend-device-common(aarch-64) = 1-4.1 libhal-backend-device-common.so()(64bit) [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdlog.so.0()(64bit) libglib-2.0.so.0()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) [ 71s] Processing files: hal-backend-device-common-debugsource-1-4.1.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: hal-backend-device-common-debugsource = 1-4.1 hal-backend-device-common-debugsource(aarch-64) = 1-4.1 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Processing files: hal-backend-device-common-devel-1-4.1.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: hal-backend-device-common-devel = 1-4.1 hal-backend-device-common-devel(aarch-64) = 1-4.1 pkgconfig(hal-backend-device-common) = 1.1 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: /usr/bin/pkg-config pkgconfig(dlog) pkgconfig(libudev) [ 71s] Processing files: hal-backend-device-common-debuginfo-1-4.1.aarch64 [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: hal-backend-device-common-debuginfo = 1-4.1 hal-backend-device-common-debuginfo(aarch-64) = 1-4.1 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Recommends: hal-backend-device-common-debugsource(aarch-64) = 1-4.1 [ 71s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 [ 71s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-common-1-4.1.src.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-1-4.1.aarch64.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-debugsource-1-4.1.aarch64.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-devel-1-4.1.aarch64.rpm [ 71s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-debuginfo-1-4.1.aarch64.rpm [ 71s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6sh0oX [ 71s] + umask 022 [ 71s] + cd /home/abuild/rpmbuild/BUILD [ 71s] + cd hal-backend-device-common-1 [ 71s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.aarch64 [ 71s] + exit 0 [ 71s] ... checking for files with abuild user/group [ 71s] ... creating baselibs [ 72s] ... comparing built packages with the former built [ 72s] /usr/lib/build/pkg-diff.sh [ 72s] compare /.build.oldpackages/hal-backend-device-common-1-3.2.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-device-common-1-4.1.src.rpm [ 72s] This is not a prerelease project. Compare the project name. [ 72s] comparing rpmtags [ 72s] comparing RELEASE [ 72s] comparing PROVIDES [ 72s] comparing scripts [ 72s] comparing filelist [ 72s] comparing file checksum [ 72s] RPM meta information is identical [ 72s] compare /.build.oldpackages/hal-backend-device-common-1-3.2.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-1-4.1.aarch64.rpm [ 72s] Comparing hal-backend-device-common-1-3.2.aarch64.rpm to hal-backend-device-common-1-4.1.aarch64.rpm [ 72s] This is not a prerelease project. Compare the project name. [ 72s] comparing rpmtags [ 72s] --- /tmp/tmp.DBpO104624/tmp.yyck104642 2022-06-02 13:18:48.535876261 +0000 [ 72s] +++ /tmp/tmp.DBpO104624/tmp.wryE104644 2022-06-02 13:18:48.539876117 +0000 [ 72s] @@ -8,4 +8,4 @@ [ 72s] cpio xz 5T [ 72s] [ 72s] (none) (none) (none) [ 72s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/d6f831db362d835a64b5970e45b29f51-hal-backend-device-common Tizen:6.5:Unified [ 72s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common Tizen:6.5:Unified [ 72s] RPM meta information is different [ 72s] compare /.build.oldpackages/hal-backend-device-common-debuginfo-1-3.2.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-debuginfo-1-4.1.aarch64.rpm [ 72s] skipping -debuginfo package [ 72s] compare /.build.oldpackages/hal-backend-device-common-debugsource-1-3.2.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-debugsource-1-4.1.aarch64.rpm [ 72s] Comparing hal-backend-device-common-debugsource-1-3.2.aarch64.rpm to hal-backend-device-common-debugsource-1-4.1.aarch64.rpm [ 72s] This is not a prerelease project. Compare the project name. [ 72s] comparing rpmtags [ 72s] --- /tmp/tmp.cQot104664/tmp.yhXZ104691 2022-06-02 13:18:48.735869086 +0000 [ 72s] +++ /tmp/tmp.cQot104664/tmp.dhnS104693 2022-06-02 13:18:48.743868799 +0000 [ 72s] @@ -10,4 +10,4 @@ [ 72s] cpio xz 5T [ 72s] [ 72s] (none) (none) (none) [ 72s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/d6f831db362d835a64b5970e45b29f51-hal-backend-device-common Tizen:6.5:Unified [ 72s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common Tizen:6.5:Unified [ 72s] RPM meta information is different [ 72s] compare /.build.oldpackages/hal-backend-device-common-devel-1-3.2.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-common-devel-1-4.1.aarch64.rpm [ 72s] Comparing hal-backend-device-common-devel-1-3.2.aarch64.rpm to hal-backend-device-common-devel-1-4.1.aarch64.rpm [ 72s] This is not a prerelease project. Compare the project name. [ 72s] comparing rpmtags [ 72s] --- /tmp/tmp.FLJn104711/tmp.mbXT104729 2022-06-02 13:18:48.923862342 +0000 [ 72s] +++ /tmp/tmp.FLJn104711/tmp.KRTn104731 2022-06-02 13:18:48.931862055 +0000 [ 72s] @@ -8,4 +8,4 @@ [ 72s] cpio xz 5T [ 72s] [ 72s] (none) (none) (none) [ 72s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/d6f831db362d835a64b5970e45b29f51-hal-backend-device-common Tizen:6.5:Unified [ 72s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common Tizen:6.5:Unified [ 72s] RPM meta information is different [ 72s] [ 72s] obspw01 finished "build hal-backend-device-common.spec" at Thu Jun 2 13:18:48 UTC 2022. [ 72s] Retried build at Fri Jun 10 14:18:53 2022 returned same result, skipped