[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw18 started "build _service:gbs:hal-backend-device-tm1.spec" at Thu Jun 2 13:19:01 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-tm1 for project 'Tizen:6.5:Unified' repository 'standard' arch 'aarch64' srcmd5 '1698fc2f3468d6596883e2040f5e2164' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-device-tm1.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 9s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: gio-branding-upstream -> libgio [ 9s] breaking dependency libgio -> gio-branding-upstream [ 9s] cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/145] installing dlog-config-persistent-logs-6.5.9-5.4 [ 9s] [2/145] installing libmagic-data-5.39-2.52 [ 9s] [3/145] installing setup-0.9-3.1 [ 10s] [4/145] installing filesystem-3.1-1.1 [ 10s] [5/145] installing glibc-2.30-2.10 [ 10s] [6/145] installing bash-3.2.57-2.1 [ 10s] [7/145] installing capi-base-common-0.4.67-3.1 [ 10s] [8/145] installing cpio-2.8-1.1 [ 10s] [9/145] installing diffutils-3.3-1.1 [ 11s] [10/145] installing findutils-4.3.8-2.61 [ 11s] [11/145] installing gdbm-1.8.3-2.140 [ 11s] [12/145] installing hostname-3.23-1.1 [ 11s] [13/145] installing iniparser-4.1-1.1 [ 11s] [14/145] installing libatomic-9.2.0-1.46 [ 12s] [15/145] installing libattr-2.4.48-1.142 [ 12s] [16/145] installing libblkid-2.36-1.7 [ 12s] [17/145] installing libbz2-1.0.8-2.24 [ 13s] [18/145] installing libcap-2.24-2.64 [ 13s] [19/145] installing libexpat-2.2.9-2.9 [ 13s] [20/145] installing libext2fs-1.46.0-1.8 [ 14s] [21/145] installing libffi-3.3-1.132 [ 14s] [22/145] installing libfreebl3-3.34.1-1.91 [ 14s] [23/145] installing libgcc-9.2.0-1.46 [ 15s] [24/145] installing libgomp-9.2.0-1.46 [ 15s] [25/145] installing libitm-9.2.0-1.46 [ 15s] [26/145] installing libjson-0.15-1.1 [ 16s] [27/145] installing libltdl-2.4.2-1.97 [ 16s] [28/145] installing liblua-5.1.5-1.46 [ 16s] [29/145] installing liblzma-5.2.5-3.10 [ 17s] [30/145] installing libopenssl11-1.1.1l-2.50 [ 17s] [31/145] installing libpcre-8.44-1.8 [ 17s] [32/145] installing libpopt-1.16-1.135 [ 18s] [33/145] installing libpython3_9m1_0-3.9.1-2.15 [ 18s] [34/145] installing libsmack-1.3.1-2.60 [ 18s] [35/145] installing libsmartcols-2.36-1.7 [ 19s] [36/145] installing libsqlite-3.33.0-1.114 [ 19s] [37/145] installing libuuid-2.36-1.7 [ 20s] [38/145] installing libzstd1-1.4.5-1.82 [ 20s] [39/145] installing m4-1.4.17-1.1 [ 20s] [40/145] installing net-tools-2.0_20121208git-1.1 [ 20s] [41/145] installing nspr-4.12-1.129 [ 20s] [42/145] installing patch-2.7-2.18 [ 20s] [43/145] installing pkg-config-0.28-1.120 [ 20s] [44/145] installing sed-4.1c-2.1 [ 20s] [45/145] installing update-alternatives-1.20.5-1.1 [ 20s] [46/145] installing which-2.17-1.1 [ 21s] [47/145] installing zlib-1.2.11-1.136 [ 21s] [48/145] installing shadow-utils-4.1.4.2-2.9 [ 21s] [49/145] installing build-compare-2015.04.28-1.38 [ 21s] [50/145] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 22s] [51/145] installing terminfo-base-full-6.2-1.98 [ 23s] [52/145] installing capi-base-common-devel-0.4.67-3.1 [ 23s] [53/145] installing coreutils-6.9-1.28 [ 23s] [54/145] installing cpp-9.2.0-1.46 [ 24s] [55/145] installing gawk-3.1.5-1.1 [ 24s] [56/145] installing gcc-c++-9.2.0-1.46 [ 25s] [57/145] installing grep-2.5.2-2.1 [ 25s] [58/145] installing libacl-2.2.53-1.142 [ 25s] [59/145] installing libblkid-devel-2.36-1.7 [ 25s] [60/145] installing libcap-tools-2.24-2.64 [ 25s] [61/145] installing libelf-0.178-2.20 [ 25s] [62/145] installing libffi-devel-3.3-1.132 [ 25s] [63/145] installing libgfortran-9.2.0-1.46 [ 26s] [64/145] installing libglib-2.62.3-1.19 [ 26s] [65/145] installing libmount-2.36-1.7 [ 27s] [66/145] installing libpcreposix-8.44-1.8 [ 27s] [67/145] installing libstdc++-9.2.0-1.46 [ 27s] [68/145] installing make-4.0-1.23 [ 28s] [69/145] installing nss-certs-3.34.1-1.91 [ 28s] [70/145] installing smack-1.3.1-2.60 [ 28s] [71/145] installing bzip2-1.0.8-2.24 [ 28s] [72/145] installing libfdisk-2.36-1.7 [ 28s] [73/145] installing libmagic-5.39-2.52 [ 28s] [74/145] installing libxml2-2.9.12-1.34 [ 29s] [75/145] installing perl-5.32.0-2.8 [ 31s] [76/145] installing xz-5.2.5-3.10 [ 31s] [77/145] installing libkmod-28-1.1 [ 32s] [78/145] installing build-mkbaselibs-20120927-1.1 [ 32s] [79/145] installing libstdc++-devel-9.2.0-1.46 [ 32s] [80/145] installing acl-2.2.53-1.142 [ 32s] [81/145] installing file-5.39-2.52 [ 32s] [82/145] installing libgmodule-2.62.3-1.19 [ 33s] [83/145] installing libgthread-2.62.3-1.19 [ 33s] [84/145] installing linux-glibc-devel-3.10-1.147 [ 34s] [85/145] installing tar-1.17-2.1 [ 34s] [86/145] installing autoconf-2.69-1.101 [ 34s] [87/145] installing binutils-2.33.1-2.12 [ 35s] [88/145] installing glibc-locale-2.30-2.10 [ 35s] [89/145] installing gzip-1.3.12-2.135 [ 35s] [90/145] installing libcc1-9.2.0-1.46 [ 36s] [91/145] installing libgobject-2.62.3-1.19 [ 36s] [92/145] installing libmount-devel-2.36-1.7 [ 36s] [93/145] installing libubsan-9.2.0-1.46 [ 36s] [94/145] installing pam-1.1.6-1.1 [ 37s] [95/145] installing libncurses6-6.2-1.98 [ 37s] [96/145] installing libpcrecpp-8.44-1.8 [ 37s] [97/145] installing tzdata-2020a-4.1 [ 38s] [98/145] installing dlog-6.5.9-5.4 [ 38s] [99/145] installing libdw-0.178-2.20 [ 39s] [100/145] installing security-config-1.0-8.1 [ 44s] groupadd: group 'dbus' already exists [ 44s] groupadd: group 'priv_appdebugging' already exists [ 44s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 44s] [101/145] installing libarchive-3.5.1-2.18 [ 45s] [102/145] installing shared-mime-info-1.7-1.1 [ 50s] [103/145] installing libncurses-6.2-1.98 [ 50s] [104/145] installing dlog-logger-6.5.9-5.4 [ 50s] [105/145] installing glibc-devel-2.30-2.10 [ 50s] [106/145] installing less-466-1.1 [ 50s] [107/145] installing libreadline-5.2-1.39 [ 51s] [108/145] installing procps-ng-3.3.16-1.1 [ 51s] [109/145] installing automake-1.15.1-1.91 [ 51s] [110/145] installing libasm-0.178-2.20 [ 51s] [111/145] installing build-20120927-1.1 [ 51s] [112/145] installing libsystemd-244-8.1 [ 52s] [113/145] installing pcre-devel-8.44-1.8 [ 52s] [114/145] installing gcc-9.2.0-1.46 [ 53s] [115/145] installing qemu-accel-x86_64-aarch64-0.4-2.12 [ 60s] [116/145] installing zlib-devel-1.2.11-1.136 [ 60s] [117/145] installing libtool-2.4.2-1.97 [ 60s] [118/145] installing elfutils-0.178-2.20 [ 60s] [119/145] installing libdlog-6.5.9-5.4 [ 60s] [120/145] installing python3-base-3.9.1-2.15 [ 61s] [121/145] installing util-linux-2.36-1.7 [ 61s] [122/145] installing python3-3.9.1-1.14 [ 62s] [123/145] installing libdlog-devel-6.5.9-5.4 [ 62s] [124/145] installing util-linux-su-2.36-1.7 [ 62s] [125/145] installing hal-backend-device-common-1-4.1 [ 62s] [126/145] installing capi-system-info-0.5.2-5.1 [ 62s] Running capi-system-info %posttrans script [ 62s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 62s] iniparser: cannot open /etc/info.ini [ 62s] [127/145] installing cmake-3.16.4-1.1 [ 63s] [128/145] installing systemd-244-8.1 [ 65s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 65s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 65s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 65s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 65s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 65s] [129/145] installing capi-system-info-devel-0.5.2-5.1 [ 65s] [130/145] installing systemd-devel-244-8.1 [ 66s] [131/145] installing hal-backend-device-common-devel-1-4.1 [ 66s] [132/145] installing nss-3.34.1-1.91 [ 66s] [133/145] installing libgio-2.62.3-1.19 [ 66s] [134/145] installing gio-branding-upstream-2.62.3-1.19 [ 67s] [135/145] installing libsoftokn3-3.34.1-1.91 [ 67s] [136/145] installing glib2-tools-2.62.3-1.19 [ 67s] [137/145] installing hal-api-common-0.0.1-3.1 [ 67s] [138/145] installing libsyscommon-4.1-6.1 [ 67s] [139/145] installing rpm-4.14.1.1-1.66 [ 68s] [140/145] installing hal-api-common-devel-0.0.1-3.1 [ 68s] [141/145] installing hal-api-device-1.0.0-8.1 [ 69s] [142/145] installing glib2-devel-2.62.3-1.19 [ 69s] [143/145] installing rpm-build-4.14.1.1-1.66 [ 69s] [144/145] installing hal-api-device-devel-1.0.0-8.1 [ 69s] [145/145] installing libsyscommon-devel-4.1-6.1 [ 69s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 69s] now finalizing build dir... [ 69s] Running build time source services... [ 70s] build target is aarch64-tizen-linux [ 70s] ----------------------------------------------------------------- [ 70s] I have the following modifications for hal-backend-device-tm1.spec: [ 70s] 5c5 [ 70s] < Release: 0 [ 70s] --- [ 70s] > Release: 4.1 [ 70s] ----------------------------------------------------------------- [ 70s] ----- building hal-backend-device-tm1.spec (user abuild) [ 70s] ----------------------------------------------------------------- [ 70s] ----------------------------------------------------------------- [ 70s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/1698fc2f3468d6596883e2040f5e2164-hal-backend-device-tm1' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1.spec [ 70s] Building target platforms: aarch64-tizen-linux [ 70s] Building for target aarch64-tizen-linux [ 70s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ixNPCM [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + rm -rf hal-backend-device-tm1-0.0.1 [ 70s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1-0.0.1.tar.gz [ 70s] + /bin/tar -xof - [ 70s] + STATUS=0 [ 70s] + '[' 0 -ne 0 ']' [ 70s] + cd hal-backend-device-tm1-0.0.1 [ 70s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 70s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-tm1.manifest . [ 70s] + exit 0 [ 70s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.3qhpqM [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd hal-backend-device-tm1-0.0.1 [ 70s] ++ uname -m [ 70s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 70s] + ref=/usr/lib/rpm [ 70s] + for s in guess sub [ 70s] ++ find -maxdepth 8 -name config.guess [ 70s] + for s in guess sub [ 70s] ++ find -maxdepth 8 -name config.sub [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 70s] + export CFLAGS [ 70s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 70s] + export CXXFLAGS [ 70s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 70s] + export FFLAGS [ 70s] + LDFLAGS= [ 70s] + export LDFLAGS [ 70s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 70s] + export CFLAGS [ 70s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 70s] + export CXXFLAGS [ 70s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 70s] + export FFLAGS [ 70s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib64 -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64 -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DLIB_SUFFIX=64 -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DCMAKE_INSTALL_PREFIX=/usr -DHAL_LIB_DIR=/hal/lib64 -DHAL_LICENSE_DIR=/hal/share/licenses -DENABLE_DLOG=on [ 70s] CMake Warning: [ 70s] No source or binary directory provided. Both will be assumed to be the [ 70s] same as the current working directory, but note that this warning will [ 70s] become a fatal error in future CMake releases. [ 70s] [ 70s] [ 70s] -- The C compiler identification is GNU 9.2.0 [ 70s] -- Check for working C compiler: /bin/cc [ 71s] -- Check for working C compiler: /bin/cc -- works [ 71s] -- Detecting C compiler ABI info [ 71s] -- Detecting C compiler ABI info - done [ 71s] -- Detecting C compile features [ 71s] -- Detecting C compile features - done [ 71s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 71s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 71s] -- Found hal-backend-device-common, version 1.1 [ 71s] -- Found glib-2.0, version 2.62.3 [ 72s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 72s] -- Found hal-backend-device-common, version 1.1 [ 72s] -- Found libsyscommon, version 4.1 [ 73s] -- Checking for module 'hal-backend-device-common' [ 73s] -- Found hal-backend-device-common, version 1.1 [ 73s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 73s] -- Found hal-backend-device-common, version 1.1 [ 74s] -- Found glib-2.0, version 2.62.3 [ 74s] -- Checking for modules 'hal-backend-device-common;libsyscommon' [ 74s] -- Found hal-backend-device-common, version 1.1 [ 74s] -- Found libsyscommon, version 4.1 [ 75s] -- Checking for modules 'hal-backend-device-common;glib-2.0' [ 75s] -- Found hal-backend-device-common, version 1.1 [ 75s] -- Found glib-2.0, version 2.62.3 [ 76s] -- Checking for module 'hal-backend-device-common' [ 76s] -- Found hal-backend-device-common, version 1.1 [ 76s] -- Checking for modules 'hal-backend-device-common;glib-2.0;libsyscommon' [ 77s] -- Found hal-backend-device-common, version 1.1 [ 77s] -- Found glib-2.0, version 2.62.3 [ 77s] -- Found libsyscommon, version 4.1 [ 77s] -- Checking for module 'dlog' [ 77s] -- Found dlog, version 1.0 [ 78s] -- Configuring done [ 78s] -- Generating done [ 78s] CMake Warning: [ 78s] Manually-specified variables were not used by the project: [ 78s] [ 78s] CMAKE_INSTALL_LIBDIR [ 78s] INCLUDE_INSTALL_DIR [ 78s] LIB_INSTALL_DIR [ 78s] LIB_SUFFIX [ 78s] SHARE_INSTALL_PREFIX [ 78s] SYSCONF_INSTALL_DIR [ 78s] [ 78s] [ 78s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1 [ 78s] + make -j8 [ 78s] Scanning dependencies of target hal-backend-device-display [ 78s] Scanning dependencies of target hal-backend-device-led [ 78s] Scanning dependencies of target hal-backend-device-touchscreen [ 78s] Scanning dependencies of target hal-backend-device-thermal [ 78s] Scanning dependencies of target hal-backend-device-board [ 78s] Scanning dependencies of target hal-backend-device-ir [ 78s] Scanning dependencies of target hal-backend-device-battery [ 78s] Scanning dependencies of target hal-backend-device-external-connection [ 78s] [ 5%] Building C object hw/display/CMakeFiles/hal-backend-device-display.dir/display.c.o [ 78s] [ 10%] Building C object hw/led/CMakeFiles/hal-backend-device-led.dir/led.c.o [ 78s] [ 15%] Building C object hw/thermal/CMakeFiles/hal-backend-device-thermal.dir/thermal.c.o [ 78s] [ 20%] Building C object hw/touchscreen/CMakeFiles/hal-backend-device-touchscreen.dir/touchscreen.c.o [ 78s] [ 25%] Building C object hw/battery/CMakeFiles/hal-backend-device-battery.dir/battery.c.o [ 78s] [ 30%] Building C object hw/ir/CMakeFiles/hal-backend-device-ir.dir/ir.c.o [ 78s] [ 35%] Building C object hw/board/CMakeFiles/hal-backend-device-board.dir/board.c.o [ 78s] [ 40%] Building C object hw/external_connection/CMakeFiles/hal-backend-device-external-connection.dir/external_connection.c.o [ 78s] [ 45%] Linking C shared module libhal-backend-device-ir.so [ 78s] [ 50%] Linking C shared module libhal-backend-device-led.so [ 78s] [ 55%] Linking C shared module libhal-backend-device-board.so [ 78s] [ 55%] Built target hal-backend-device-ir [ 78s] [ 60%] Linking C shared module libhal-backend-device-display.so [ 78s] [ 65%] Linking C shared module libhal-backend-device-external-connection.so [ 78s] Scanning dependencies of target hal-backend-device-haptic [ 78s] [ 70%] Building C object hw/haptic/CMakeFiles/hal-backend-device-haptic.dir/standard.c.o [ 78s] [ 70%] Built target hal-backend-device-led [ 78s] [ 75%] Linking C shared module libhal-backend-device-touchscreen.so [ 78s] Scanning dependencies of target hal-backend-device-memory [ 78s] [ 80%] Building C object hw/memory/CMakeFiles/hal-backend-device-memory.dir/memory.c.o [ 78s] [ 80%] Built target hal-backend-device-board [ 78s] [ 80%] Built target hal-backend-device-external-connection [ 78s] [ 80%] Built target hal-backend-device-display [ 78s] [ 80%] Built target hal-backend-device-touchscreen [ 78s] [ 85%] Linking C shared module libhal-backend-device-battery.so [ 78s] [ 90%] Linking C shared module libhal-backend-device-thermal.so [ 78s] [ 90%] Built target hal-backend-device-battery [ 78s] [ 95%] Linking C shared module libhal-backend-device-memory.so [ 78s] [ 95%] Built target hal-backend-device-thermal [ 78s] [ 95%] Built target hal-backend-device-memory [ 78s] [100%] Linking C shared module libhal-backend-device-haptic.so [ 78s] [100%] Built target hal-backend-device-haptic [ 78s] + exit 0 [ 78s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.DL7yzP [ 78s] + umask 022 [ 78s] + cd /home/abuild/rpmbuild/BUILD [ 78s] + cd hal-backend-device-tm1-0.0.1 [ 78s] + LANG=C [ 78s] + export LANG [ 78s] + unset DISPLAY [ 78s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 78s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 78s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 78s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/etc/deviced [ 78s] + install -m 644 conf/usb-gadget.conf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/etc/deviced [ 78s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/usr/lib/udev/rules.d [ 78s] + install -m 644 rules/61-video.rules /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/usr/lib/udev/rules.d [ 78s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 install [ 78s] [ 10%] Built target hal-backend-device-battery [ 78s] [ 20%] Built target hal-backend-device-display [ 78s] [ 30%] Built target hal-backend-device-led [ 78s] [ 40%] Built target hal-backend-device-external-connection [ 78s] [ 50%] Built target hal-backend-device-touchscreen [ 78s] [ 60%] Built target hal-backend-device-ir [ 79s] [ 70%] Built target hal-backend-device-thermal [ 79s] [ 80%] Built target hal-backend-device-board [ 79s] [ 90%] Built target hal-backend-device-haptic [ 79s] [100%] Built target hal-backend-device-memory [ 79s] Install the project... [ 79s] -- Install configuration: "" [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/share/licenses/hal-backend-device-tm1/LICENSE.Apache-2.0 [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-battery.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-display.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-led.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-external-connection.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-touchscreen.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-ir.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-thermal.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-board.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-haptic.so [ 79s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-memory.so [ 79s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/usr/share/info/dir [ 79s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 -regex '.*\.la$' [ 79s] + xargs rm -f -- [ 79s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 -regex '.*\.a$' [ 79s] + xargs rm -f -- [ 79s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.0.1-4.1 --unique-debug-src-base hal-backend-device-tm1-0.0.1-4.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1 [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000537158 s, 13.0 kB/s [ 79s] , 0.000516685 s, 13.5 kB/s [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 7 bytes (7 B) copied1+0 records in [ 79s] 1+0 records out [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 7 bytes (7 B) copied7 bytes (7 B) copied1+0 records in [ 79s] 1+0 records out [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 7 bytes (7 B) copied7 bytes (7 B) copied7 bytes (7 B) copied, 0.000894435 s, 7.8 kB/s [ 79s] , 0.000871414 s, 8.0 kB/s [ 79s] , 0.00088363 s, 7.9 kB/s [ 79s] , 0.000875473 s, 8.0 kB/s [ 79s] , 0.000869481 s, 8.1 kB/s [ 79s] , 0.000891763 s, 7.8 kB/s [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-battery.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-board.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-external-connection.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-haptic.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-memory.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-led.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-display.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-ir.so [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 7 bytes (7 B) copied, 0.000523332 s, 13.4 kB/s [ 79s] 1+0 records in [ 79s] 1+0 records out [ 79s] 7 bytes (7 B) copied0+0 records in [ 79s] 0+0 records out [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied0 bytes (0 B) copied, 0.000364827 s, 0.0 kB/s [ 79s] , 0.000646392 s, 10.8 kB/s [ 79s] , 0.000381494 s, 0.0 kB/s [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied, 0.000617719 s, 0.0 kB/s [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied, 0.000367754 s, 0.0 kB/s [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied, 0.000614611 s, 0.0 kB/s [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied, 0.00037478 s, 0.0 kB/s [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-thermal.so [ 79s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64/hal/lib64/libhal-backend-device-touchscreen.so [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied, 0.000364094 s, 0.0 kB/s [ 79s] 0+0 records in [ 79s] 0+0 records out [ 79s] 0 bytes (0 B) copied, 0.000364306 s, 0.0 kB/s [ 79s] 94 blocks [ 79s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1/hal-backend-device-tm1-debuginfo.manifest [ 79s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-tm1-0.0.1/hal-backend-device-tm1-debugsource.manifest [ 80s] + /usr/lib/rpm/check-buildroot [ 80s] + /usr/lib/rpm//brp-compress [ 80s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 80s] + /usr/lib/rpm/brp-python-hardlink [ 80s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 80s] Processing files: hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 80s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 80s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 80s] [ 80s] Provides: hal-backend-device-tm1 = 0.0.1-4.1 hal-backend-device-tm1(aarch-64) = 0.0.1-4.1 libhal-backend-device-battery.so()(64bit) libhal-backend-device-board.so()(64bit) libhal-backend-device-display.so()(64bit) libhal-backend-device-external-connection.so()(64bit) libhal-backend-device-haptic.so()(64bit) libhal-backend-device-ir.so()(64bit) libhal-backend-device-led.so()(64bit) libhal-backend-device-memory.so()(64bit) libhal-backend-device-thermal.so()(64bit) libhal-backend-device-touchscreen.so()(64bit) [ 80s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 80s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 80s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdlog.so.0()(64bit) libglib-2.0.so.0()(64bit) libhal-backend-device-common.so()(64bit) libsyscommon.so.4.1()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) [ 80s] Processing files: hal-backend-device-tm1-debugsource-0.0.1-4.1.aarch64 [ 80s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 80s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 80s] [ 80s] Provides: hal-backend-device-tm1-debugsource = 0.0.1-4.1 hal-backend-device-tm1-debugsource(aarch-64) = 0.0.1-4.1 [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Processing files: hal-backend-device-tm1-debuginfo-0.0.1-4.1.aarch64 [ 80s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 80s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 80s] [ 80s] Provides: hal-backend-device-tm1-debuginfo = 0.0.1-4.1 hal-backend-device-tm1-debuginfo(aarch-64) = 0.0.1-4.1 [ 80s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 80s] Recommends: hal-backend-device-tm1-debugsource(aarch-64) = 0.0.1-4.1 [ 80s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 80s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-tm1-0.0.1-4.1.src.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tm1-0.0.1-4.1.aarch64.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tm1-debugsource-0.0.1-4.1.aarch64.rpm [ 80s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tm1-debuginfo-0.0.1-4.1.aarch64.rpm [ 80s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5bjMnL [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd hal-backend-device-tm1-0.0.1 [ 80s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-tm1-0.0.1-4.1.aarch64 [ 80s] + exit 0 [ 80s] ... checking for files with abuild user/group [ 80s] ... creating baselibs [ 81s] ... comparing built packages with the former built [ 81s] /usr/lib/build/pkg-diff.sh [ 81s] compare /.build.oldpackages/hal-backend-device-tm1-0.0.1-3.3.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-device-tm1-0.0.1-4.1.src.rpm [ 81s] This is not a prerelease project. Compare the project name. [ 81s] comparing rpmtags [ 81s] comparing RELEASE [ 81s] comparing PROVIDES [ 81s] comparing scripts [ 81s] comparing filelist [ 81s] comparing file checksum [ 81s] RPM meta information is identical [ 81s] compare /.build.oldpackages/hal-backend-device-tm1-0.0.1-3.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tm1-0.0.1-4.1.aarch64.rpm [ 81s] Comparing hal-backend-device-tm1-0.0.1-3.3.aarch64.rpm to hal-backend-device-tm1-0.0.1-4.1.aarch64.rpm [ 81s] This is not a prerelease project. Compare the project name. [ 81s] comparing rpmtags [ 81s] --- /tmp/tmp.VpCtG82121/tmp.aYmSl82169 2022-06-02 13:20:22.680813027 +0000 [ 81s] +++ /tmp/tmp.VpCtG82121/tmp.aeoyV82190 2022-06-02 13:20:22.688813025 +0000 [ 81s] @@ -8,4 +8,4 @@ [ 81s] cpio xz 5T [ 81s] [ 81s] (none) (none) (none) [ 81s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/f8a7965eaea692bc831b20c7d4f31ecc-hal-backend-device-tm1 Tizen:6.5:Unified [ 81s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/1698fc2f3468d6596883e2040f5e2164-hal-backend-device-tm1 Tizen:6.5:Unified [ 81s] RPM meta information is different [ 81s] compare /.build.oldpackages/hal-backend-device-tm1-debuginfo-0.0.1-3.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tm1-debuginfo-0.0.1-4.1.aarch64.rpm [ 81s] skipping -debuginfo package [ 81s] compare /.build.oldpackages/hal-backend-device-tm1-debugsource-0.0.1-3.3.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/hal-backend-device-tm1-debugsource-0.0.1-4.1.aarch64.rpm [ 81s] Comparing hal-backend-device-tm1-debugsource-0.0.1-3.3.aarch64.rpm to hal-backend-device-tm1-debugsource-0.0.1-4.1.aarch64.rpm [ 81s] This is not a prerelease project. Compare the project name. [ 81s] comparing rpmtags [ 81s] --- /tmp/tmp.sMqEB82267/tmp.bVLJk82313 2022-06-02 13:20:22.900812991 +0000 [ 81s] +++ /tmp/tmp.sMqEB82267/tmp.snoYY82317 2022-06-02 13:20:22.908812989 +0000 [ 81s] @@ -10,4 +10,4 @@ [ 81s] cpio xz 5T [ 81s] [ 81s] (none) (none) (none) [ 81s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/f8a7965eaea692bc831b20c7d4f31ecc-hal-backend-device-tm1 Tizen:6.5:Unified [ 81s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/1698fc2f3468d6596883e2040f5e2164-hal-backend-device-tm1 Tizen:6.5:Unified [ 81s] RPM meta information is different [ 81s] [ 81s] obspw18 finished "build hal-backend-device-tm1.spec" at Thu Jun 2 13:20:22 UTC 2022. [ 81s] Retried build at Fri Jun 10 14:30:00 2022 returned same result, skipped