[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_8 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obsnw01 started "build _service:gbs:perl-Switch.spec" at Thu Oct 28 22:33:50 UTC 2021. [ 0s] [ 0s] Building perl-Switch for project 'Tizen:6.5:Unified' repository 'standard' arch 'aarch64' srcmd5 '32a8db335f8a0e6d3d8cb45baa859be2' [ 0s] [ 0s] processing recipe /var/cache/build/root_8/.build-srcdir/_service:gbs:perl-Switch.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_8/.build-srcdir/_service:gbs:perl-Switch.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_8/.build.rpmlist /var/cache/build/root_8/.build-srcdir/_service:gbs:perl-Switch.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/8/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 2s] [14/41] preinstalling libgcc... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/96] installing libmagic-data-5.39-1.50 [ 9s] [2/96] installing setup-0.9-1.1 [ 9s] [3/96] installing filesystem-3.1-1.1 [ 10s] [4/96] installing glibc-2.30-1.23 [ 10s] [5/96] installing bash-3.2.57-1.1 [ 10s] [6/96] installing cpio-2.8-1.1 [ 10s] [7/96] installing diffutils-3.3-1.1 [ 10s] [8/96] installing findutils-4.3.8-1.68 [ 10s] [9/96] installing gdbm-1.8.3-2.75 [ 11s] [10/96] installing hostname-3.23-1.1 [ 11s] [11/96] installing libatomic-9.2.0-1.21 [ 11s] [12/96] installing libattr-2.4.48-1.79 [ 11s] [13/96] installing libblkid-2.36-1.1 [ 12s] [14/96] installing libbz2-1.0.8-1.75 [ 12s] [15/96] installing libcap-2.24-1.75 [ 12s] [16/96] installing libext2fs-1.46.0-1.2 [ 12s] [17/96] installing libfreebl3-3.34.1-1.40 [ 13s] [18/96] installing libgcc-9.2.0-1.21 [ 13s] [19/96] installing libgomp-9.2.0-1.21 [ 13s] [20/96] installing libitm-9.2.0-1.21 [ 14s] [21/96] installing libltdl-2.4.2-1.49 [ 15s] [22/96] installing liblua-5.1.5-1.26 [ 15s] [23/96] installing liblzma-5.2.5-1.58 [ 15s] [24/96] installing libopenssl11-1.1.1k-1.34 [ 16s] [25/96] installing libpcre-8.44-1.3 [ 16s] [26/96] installing libpopt-1.16-1.74 [ 16s] [27/96] installing libsmack-1.3.1-1.64 [ 17s] [28/96] installing libsmartcols-2.36-1.1 [ 17s] [29/96] installing libsqlite-3.33.0-1.58 [ 17s] [30/96] installing libuuid-2.36-1.1 [ 18s] [31/96] installing libzstd1-1.4.5-1.26 [ 18s] [32/96] installing m4-1.4.17-1.1 [ 18s] [33/96] installing net-tools-2.0_20121208git-1.1 [ 18s] [34/96] installing nspr-4.12-1.68 [ 18s] [35/96] installing patch-2.7-1.70 [ 18s] [36/96] installing pkg-config-0.28-1.60 [ 19s] [37/96] installing sed-4.1c-2.1 [ 19s] [38/96] installing update-alternatives-1.20.5-1.1 [ 19s] [39/96] installing which-2.17-1.1 [ 19s] [40/96] installing zlib-1.2.11-1.73 [ 19s] [41/96] installing build-compare-2015.04.28-1.18 [ 19s] [42/96] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 21s] [43/96] installing terminfo-base-full-6.2-1.45 [ 21s] [44/96] installing coreutils-6.9-1.10 [ 22s] [45/96] installing cpp-9.2.0-1.21 [ 22s] [46/96] installing gawk-3.1.5-1.1 [ 22s] [47/96] installing gcc-c++-9.2.0-1.21 [ 23s] [48/96] installing grep-2.5.2-2.1 [ 23s] [49/96] installing libacl-2.2.53-1.78 [ 24s] [50/96] installing libelf-0.178-1.44 [ 24s] [51/96] installing libgfortran-9.2.0-1.21 [ 24s] [52/96] installing libmount-2.36-1.1 [ 25s] [53/96] installing libstdc++-9.2.0-1.21 [ 25s] [54/96] installing make-4.0-1.8 [ 25s] [55/96] installing nss-certs-3.34.1-1.40 [ 25s] [56/96] installing smack-1.3.1-1.64 [ 25s] [57/96] installing bzip2-1.0.8-1.75 [ 25s] [58/96] installing libfdisk-2.36-1.1 [ 26s] [59/96] installing libmagic-5.39-1.50 [ 26s] [60/96] installing libxml2-2.9.12-1.17 [ 26s] [61/96] installing perl-5.32.0-1.26 [ 29s] [62/96] installing xz-5.2.5-1.58 [ 29s] [63/96] installing build-mkbaselibs-20120927-1.1 [ 29s] [64/96] installing libstdc++-devel-9.2.0-1.21 [ 29s] [65/96] installing file-5.39-1.50 [ 29s] [66/96] installing linux-glibc-devel-3.10-1.80 [ 30s] [67/96] installing tar-1.17-2.1 [ 30s] [68/96] installing autoconf-2.69-1.33 [ 30s] [69/96] installing binutils-2.33.1-1.28 [ 31s] [70/96] installing glibc-locale-2.30-1.23 [ 32s] [71/96] installing gzip-1.3.12-2.73 [ 32s] [72/96] installing libcc1-9.2.0-1.21 [ 32s] [73/96] installing libubsan-9.2.0-1.21 [ 33s] [74/96] installing pam-1.1.6-1.1 [ 33s] [75/96] installing libncurses6-6.2-1.45 [ 33s] [76/96] installing tzdata-2020a-1.1 [ 34s] [77/96] installing libdw-0.178-1.44 [ 34s] [78/96] installing libarchive-3.5.1-1.47 [ 34s] [79/96] installing libncurses-6.2-1.45 [ 34s] [80/96] installing glibc-devel-2.30-1.23 [ 35s] [81/96] installing less-466-1.1 [ 35s] [82/96] installing libreadline-5.2-1.21 [ 35s] [83/96] installing procps-ng-3.3.16-1.1 [ 35s] [84/96] installing automake-1.15.1-1.37 [ 36s] [85/96] installing libasm-0.178-1.44 [ 36s] [86/96] installing build-20120927-1.1 [ 36s] [87/96] installing gcc-9.2.0-1.21 [ 37s] [88/96] installing qemu-accel-x86_64-aarch64-0.4-2.3 [ 46s] [89/96] installing libtool-2.4.2-1.49 [ 46s] [90/96] installing elfutils-0.178-1.44 [ 46s] [91/96] installing util-linux-2.36-1.1 [ 46s] [92/96] installing util-linux-su-2.36-1.1 [ 46s] [93/96] installing nss-3.34.1-1.40 [ 47s] [94/96] installing libsoftokn3-3.34.1-1.40 [ 47s] [95/96] installing rpm-4.14.1.1-1.45 [ 48s] [96/96] installing rpm-build-4.14.1.1-1.45 [ 48s] removing nis flags from /var/cache/build/root_8/etc/nsswitch.conf... [ 48s] now finalizing build dir... [ 48s] Running build time source services... [ 48s] build target is aarch64-tizen-linux [ 48s] ----------------------------------------------------------------- [ 48s] I have the following modifications for perl-Switch.spec: [ 48s] 23c23 [ 48s] < Release: 4 [ 48s] --- [ 48s] > Release: 1.1 [ 48s] ----------------------------------------------------------------- [ 48s] ----- building perl-Switch.spec (user abuild) [ 48s] ----------------------------------------------------------------- [ 48s] ----------------------------------------------------------------- [ 49s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/32a8db335f8a0e6d3d8cb45baa859be2-perl-Switch' -ba /home/abuild/rpmbuild/SOURCES/perl-Switch.spec [ 51s] Building target platforms: aarch64-tizen-linux [ 51s] Building for target aarch64-tizen-linux [ 51s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.vPUgZk [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + rm -rf Switch-2.16 [ 51s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Switch-2.16.tar.gz [ 51s] + /bin/tar -xof - [ 51s] + STATUS=0 [ 51s] + '[' 0 -ne 0 ']' [ 51s] + cd Switch-2.16 [ 51s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 51s] + echo 'Patch #0 (0001-fix-syntax.patch):' [ 51s] Patch #0 (0001-fix-syntax.patch): [ 51s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 51s] patching file Switch.pm [ 51s] + cp /home/abuild/rpmbuild/SOURCES/perl-Switch.manifest . [ 51s] + exit 0 [ 51s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lYItBo [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd Switch-2.16 [ 51s] ++ uname -m [ 51s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 51s] + ref=/usr/lib/rpm [ 51s] + for s in guess sub [ 51s] ++ find -maxdepth 8 -name config.guess [ 51s] + for s in guess sub [ 51s] ++ find -maxdepth 8 -name config.sub [ 51s] + LANG=C [ 51s] + export LANG [ 51s] + unset DISPLAY [ 51s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 51s] + export CFLAGS [ 51s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 51s] + export CXXFLAGS [ 51s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 51s] + export FFLAGS [ 51s] + LDFLAGS= [ 51s] + export LDFLAGS [ 51s] + perl Makefile.PL INSTALLDIRS=vendor [ 52s] Checking if your kit is complete... [ 52s] Looks good [ 52s] Generating a Unix-style Makefile [ 52s] Writing Makefile for Switch [ 52s] Writing MYMETA.yml and MYMETA.json [ 52s] + make -j4 [ 53s] cp Switch.pm blib/lib/Switch.pm [ 54s] Manifying 1 pod document [ 54s] + exit 0 [ 54s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.4xrktm [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd Switch-2.16 [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 [ 54s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 [ 54s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 install_vendor [ 55s] Manifying 1 pod document [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/Switch.pm [ 55s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/share/man/man3/Switch.3 [ 55s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/5.32.0/aarch64-linux-thread-multi/perllocal.pod [ 56s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi/auto [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi/auto -name .packlist -print0 [ 56s] + xargs -0 -r rm [ 56s] + '[' noarch == noarch ']' [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi/auto -depth -type d -print0 [ 56s] + xargs -0 -r rmdir [ 56s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/5.32.0/aarch64-linux-thread-multi/perllocal.pod [ 56s] + FILES=perl-Switch.files [ 56s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0 -maxdepth 1 -type f [ 56s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/Switch.pm [ 56s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/Switch.pm ']' [ 56s] + for file in '$RES' [ 56s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/Switch.pm [ 56s] + fgen_file /usr/lib64/perl5/vendor_perl/5.32.0/Switch.pm [ 56s] + /bin/cat [ 56s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/ [ 56s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/ -type d [ 56s] ++ sort [ 56s] + for dir in '`find ${base_dir} -type d | sort`' [ 56s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/ ']' [ 56s] + continue [ 56s] + for dir in '`find ${base_dir} -type d | sort`' [ 56s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/ ']' [ 56s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi [ 56s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0/ '{print $2}' [ 56s] + el=aarch64-linux-thread-multi [ 56s] + all_dir=(${all_dir[@]} $el) [ 56s] + for i in '${all_dir[@]}' [ 56s] + '[' aarch64-linux-thread-multi = auto ']' [ 56s] + '[' /usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi/auto ']' [ 56s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0//aarch64-linux-thread-multi ']' [ 56s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.32.0//aarch64-linux-thread-multi -maxdepth 1 -type f [ 56s] + RES= [ 56s] + '[' -n '' ']' [ 56s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.32.0/aarch64-linux-thread-multi [ 56s] + /bin/cat [ 56s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/share/man ']' [ 56s] + fgen_file '/usr/share/man/man?/*' [ 56s] + /bin/cat [ 56s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/var/adm/perl-modules/perl-Switch ']' [ 56s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64/usr/bin ']' [ 56s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 2.16-1.1 --unique-debug-src-base perl-Switch-2.16-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/Switch-2.16 [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Switch-2.16/perl-Switch-debuginfo.manifest [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Switch-2.16/perl-Switch-debugsource.manifest [ 56s] + /usr/lib/rpm/check-buildroot [ 56s] + /usr/lib/rpm//brp-compress [ 56s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 56s] + /usr/lib/rpm/brp-python-hardlink [ 56s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 [ 56s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.7TC2Ko [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd Switch-2.16 [ 56s] + make test [ 56s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 59s] t/given.t ... ok [ 59s] t/nested.t .. ok [ 61s] t/switch.t .. ok [ 61s] All tests successful. [ 61s] Files=3, Tests=590, 4 wallclock secs ( 0.38 usr 0.01 sys + 4.13 cusr 0.04 csys = 4.56 CPU) [ 61s] Result: PASS [ 61s] + exit 0 [ 61s] Processing files: perl-Switch-2.16-1.1.noarch [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: perl(Switch) = 2.16 perl-Switch = 2.16-1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 [ 61s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Switch-2.16-1.1.src.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Switch-2.16-1.1.noarch.rpm [ 61s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.nXgyQk [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd Switch-2.16 [ 61s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Switch-2.16-1.1.aarch64 [ 61s] + exit 0 [ 61s] ... checking for files with abuild user/group [ 62s] ... creating baselibs [ 62s] [ 62s] obsnw01 finished "build perl-Switch.spec" at Thu Oct 28 22:34:52 UTC 2021. [ 62s] Retried build at Wed Nov 10 09:14:23 2021 returned same result, skipped Retried build at Wed Nov 10 11:03:52 2021 returned same result, skipped Retried build at Tue Dec 14 13:58:57 2021 returned same result, skipped Retried build at Sun Jan 16 20:20:11 2022 returned same result, skipped Retried build at Wed Apr 6 09:42:58 2022 returned same result, skipped Retried build at Thu May 26 00:20:55 2022 returned same result, skipped Retried build at Tue May 31 03:50:21 2022 returned same result, skipped