[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw26 started "build _service:gbs:python-pycurl.spec" at Thu Oct 28 22:34:24 UTC 2021. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:6.5:Unified' repository 'standard' arch 'aarch64' srcmd5 '9832bb21c95a7e416d4dd18f6faf81d9' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 1s] [8/41] preinstalling grep... [ 1s] [9/41] preinstalling libattr... [ 1s] [10/41] preinstalling libblkid... [ 1s] [11/41] preinstalling libbz2... [ 1s] [12/41] preinstalling libcap... [ 1s] [13/41] preinstalling libfreebl3... [ 1s] [14/41] preinstalling libgcc... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 8s] [29/41] preinstalling libacl... [ 8s] [30/41] preinstalling libelf... [ 8s] [31/41] preinstalling libmount... [ 8s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-aarch64 postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 9s] reordering...cycle: libsoftokn3 -> nss [ 9s] breaking dependency nss -> libsoftokn3 [ 9s] done [ 9s] [1/111] installing boost-license-1.71.0-1.1 [ 9s] [2/111] installing libmagic-data-5.39-1.50 [ 9s] [3/111] installing setup-0.9-1.1 [ 9s] [4/111] installing filesystem-3.1-1.1 [ 9s] [5/111] installing glibc-2.30-1.23 [ 10s] [6/111] installing bash-3.2.57-1.1 [ 10s] [7/111] installing cpio-2.8-1.1 [ 10s] [8/111] installing diffutils-3.3-1.1 [ 10s] [9/111] installing findutils-4.3.8-1.68 [ 10s] [10/111] installing gdbm-1.8.3-2.75 [ 10s] [11/111] installing hostname-3.23-1.1 [ 11s] [12/111] installing libatomic-9.2.0-1.21 [ 11s] [13/111] installing libattr-2.4.48-1.79 [ 11s] [14/111] installing libblkid-2.36-1.1 [ 12s] [15/111] installing libbz2-1.0.8-1.75 [ 12s] [16/111] installing libcap-2.24-1.75 [ 12s] [17/111] installing libcares-1.17.1-1.1 [ 12s] [18/111] installing libext2fs-1.46.0-1.2 [ 13s] [19/111] installing libfreebl3-3.34.1-1.40 [ 13s] [20/111] installing libgcc-9.2.0-1.21 [ 14s] [21/111] installing libgomp-9.2.0-1.21 [ 14s] [22/111] installing libitm-9.2.0-1.21 [ 14s] [23/111] installing libltdl-2.4.2-1.49 [ 15s] [24/111] installing liblua-5.1.5-1.26 [ 15s] [25/111] installing liblzma-5.2.5-1.58 [ 15s] [26/111] installing libopenssl11-1.1.1k-1.34 [ 16s] [27/111] installing libpcre-8.44-1.3 [ 16s] [28/111] installing libpopt-1.16-1.74 [ 16s] [29/111] installing libpython-2.7.18-1.13 [ 17s] [30/111] installing libsmack-1.3.1-1.64 [ 17s] [31/111] installing libsmartcols-2.36-1.1 [ 17s] [32/111] installing libsqlite-3.33.0-1.58 [ 18s] [33/111] installing libuuid-2.36-1.1 [ 18s] [34/111] installing libzstd1-1.4.5-1.26 [ 18s] [35/111] installing m4-1.4.17-1.1 [ 18s] [36/111] installing net-tools-2.0_20121208git-1.1 [ 19s] [37/111] installing nspr-4.12-1.68 [ 19s] [38/111] installing patch-2.7-1.70 [ 19s] [39/111] installing pkg-config-0.28-1.60 [ 19s] [40/111] installing sed-4.1c-2.1 [ 19s] [41/111] installing update-alternatives-1.20.5-1.1 [ 19s] [42/111] installing which-2.17-1.1 [ 19s] [43/111] installing zlib-1.2.11-1.73 [ 19s] [44/111] installing build-compare-2015.04.28-1.18 [ 19s] [45/111] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.3.1 [ 21s] [46/111] installing terminfo-base-full-6.2-1.45 [ 21s] [47/111] installing coreutils-6.9-1.10 [ 21s] [48/111] installing cpp-9.2.0-1.21 [ 22s] [49/111] installing gawk-3.1.5-1.1 [ 22s] [50/111] installing gcc-c++-9.2.0-1.21 [ 23s] [51/111] installing grep-2.5.2-2.1 [ 23s] [52/111] installing libacl-2.2.53-1.78 [ 24s] [53/111] installing libelf-0.178-1.44 [ 24s] [54/111] installing libgfortran-9.2.0-1.21 [ 24s] [55/111] installing libmount-2.36-1.1 [ 25s] [56/111] installing libstdc++-9.2.0-1.21 [ 25s] [57/111] installing make-4.0-1.8 [ 25s] [58/111] installing nss-certs-3.34.1-1.40 [ 25s] [59/111] installing smack-1.3.1-1.64 [ 25s] [60/111] installing bzip2-1.0.8-1.75 [ 26s] [61/111] installing libfdisk-2.36-1.1 [ 26s] [62/111] installing libmagic-5.39-1.50 [ 26s] [63/111] installing libxml2-2.9.12-1.17 [ 27s] [64/111] installing perl-5.32.0-1.26 [ 29s] [65/111] installing xz-5.2.5-1.58 [ 29s] [66/111] installing build-mkbaselibs-20120927-1.1 [ 29s] [67/111] installing libstdc++-devel-9.2.0-1.21 [ 30s] [68/111] installing file-5.39-1.50 [ 30s] [69/111] installing linux-glibc-devel-3.10-1.80 [ 30s] [70/111] installing tar-1.17-2.1 [ 30s] [71/111] installing autoconf-2.69-1.33 [ 31s] [72/111] installing binutils-2.33.1-1.28 [ 31s] [73/111] installing db4-4.8.30.NC-1.67 [ 32s] [74/111] installing glibc-locale-2.30-1.23 [ 32s] [75/111] installing gzip-1.3.12-2.73 [ 32s] [76/111] installing libcc1-9.2.0-1.21 [ 33s] [77/111] installing libubsan-9.2.0-1.21 [ 33s] [78/111] installing pam-1.1.6-1.1 [ 33s] [79/111] installing boost-system-1.71.0-1.1 [ 34s] [80/111] installing boost-thread-1.71.0-1.1 [ 34s] [81/111] installing libicu-67.1-1.1 [ 36s] [82/111] installing libncurses6-6.2-1.45 [ 36s] [83/111] installing tzdata-2020a-1.1 [ 36s] [84/111] installing libdw-0.178-1.44 [ 37s] [85/111] installing libarchive-3.5.1-1.47 [ 37s] [86/111] installing libncurses-6.2-1.45 [ 37s] [87/111] installing glibc-devel-2.30-1.23 [ 37s] [88/111] installing less-466-1.1 [ 37s] [89/111] installing libreadline-5.2-1.21 [ 38s] [90/111] installing procps-ng-3.3.16-1.1 [ 38s] [91/111] installing automake-1.15.1-1.37 [ 38s] [92/111] installing libasm-0.178-1.44 [ 38s] [93/111] installing build-20120927-1.1 [ 39s] [94/111] installing nghttp2-1.41.0-1.1 [ 39s] [95/111] installing gcc-9.2.0-1.21 [ 40s] [96/111] installing qemu-accel-x86_64-aarch64-0.4-2.3 [ 47s] [97/111] installing libcares-devel-1.17.1-1.1 [ 47s] [98/111] installing zlib-devel-1.2.11-1.73 [ 47s] [99/111] installing libtool-2.4.2-1.49 [ 47s] [100/111] installing elfutils-0.178-1.44 [ 47s] [101/111] installing libcurl-7.73.0-1.1 [ 47s] [102/111] installing python-2.7.18-1.13 [ 49s] [103/111] installing util-linux-2.36-1.1 [ 49s] [104/111] installing libcurl-devel-7.73.0-1.1 [ 49s] [105/111] installing libopenssl1.1-devel-1.1.1k-1.34 [ 49s] [106/111] installing util-linux-su-2.36-1.1 [ 49s] [107/111] installing python-devel-2.7.18-1.13 [ 50s] [108/111] installing nss-3.34.1-1.40 [ 50s] [109/111] installing libsoftokn3-3.34.1-1.40 [ 50s] [110/111] installing rpm-4.14.1.1-1.45 [ 51s] [111/111] installing rpm-build-4.14.1.1-1.45 [ 51s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 51s] now finalizing build dir... [ 51s] Running build time source services... [ 52s] Warning: spec file parser line 59: can't expand %(...) [ 52s] Warning: spec file parser line 60: can't expand %(...) [ 52s] build target is aarch64-tizen-linux [ 52s] ----------------------------------------------------------------- [ 52s] I have the following modifications for python-pycurl.spec: [ 52s] 6c6 [ 52s] < Release: 0 [ 52s] --- [ 52s] > Release: 1.1 [ 52s] 60a61 [ 52s] > %changelog [ 52s] ----------------------------------------------------------------- [ 52s] ----- building python-pycurl.spec (user abuild) [ 52s] ----------------------------------------------------------------- [ 52s] ----------------------------------------------------------------- [ 52s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/9832bb21c95a7e416d4dd18f6faf81d9-python-pycurl' -ba /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 52s] Building target platforms: aarch64-tizen-linux [ 52s] Building for target aarch64-tizen-linux [ 52s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.j0DtnG [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + rm -rf pycurl-7.19.0 [ 52s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pycurl-7.19.0.tar.gz [ 52s] + /bin/tar -xof - [ 52s] + STATUS=0 [ 52s] + '[' 0 -ne 0 ']' [ 52s] + cd pycurl-7.19.0 [ 52s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 52s] + echo 'Patch #0 (0001-Don-t-build-static-libs.patch):' [ 52s] Patch #0 (0001-Don-t-build-static-libs.patch): [ 52s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 52s] patching file setup.py [ 52s] + echo 'Patch #1 (0002-Link-with-libcrypto.patch):' [ 52s] Patch #1 (0002-Link-with-libcrypto.patch): [ 52s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 52s] patching file setup.py [ 52s] + echo 'Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch):' [ 52s] Patch #2 (0003-Store-build_date-in-.tizen.build-id-section-to-avoid.patch): [ 52s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 52s] patching file src/pycurl.c [ 52s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 52s] + exit 0 [ 52s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.f4lvQD [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd pycurl-7.19.0 [ 52s] ++ uname -m [ 52s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 52s] + ref=/usr/lib/rpm [ 52s] + for s in guess sub [ 52s] ++ find -maxdepth 8 -name config.guess [ 52s] + for s in guess sub [ 52s] ++ find -maxdepth 8 -name config.sub [ 52s] + LANG=C [ 52s] + export LANG [ 52s] + unset DISPLAY [ 52s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 52s] + export CFLAGS [ 52s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 52s] + export CXXFLAGS [ 52s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 52s] + export FFLAGS [ 52s] + LDFLAGS= [ 52s] + export LDFLAGS [ 52s] + cp /home/abuild/rpmbuild/SOURCES/python-pycurl.manifest . [ 52s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL' [ 52s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL' [ 52s] + python setup.py build [ 53s] Using curl-config (libcurl 7.73.0) [ 53s] running build [ 53s] running build_py [ 53s] creating build [ 53s] creating build/lib.linux-aarch64-2.7 [ 53s] creating build/lib.linux-aarch64-2.7/curl [ 53s] copying python/curl/__init__.py -> build/lib.linux-aarch64-2.7/curl [ 53s] running build_ext [ 53s] building 'pycurl' extension [ 53s] creating build/temp.linux-aarch64-2.7 [ 53s] creating build/temp.linux-aarch64-2.7/src [ 53s] aarch64-tizen-linux-gnu-gcc -pthread -fno-strict-aliasing -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DNCURSES_INTERNALS -DNDEBUG -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-aarch64-2.7/src/pycurl.o [ 53s] src/pycurl.c: In function 'multi_socket_callback': [ 53s] src/pycurl.c:2351:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 53s] 2351 | int ret; [ 53s] | ^~~ [ 53s] src/pycurl.c: In function 'initpycurl': [ 53s] src/pycurl.c:3455:31: warning: passing argument 3 of 'insstr' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] [ 53s] 3455 | insstr(d, "COMPILE_DATE", COMPILE_DATE); [ 53s] | ^~~~~~~~~~~~ [ 53s] src/pycurl.c:3379:39: note: expected 'char *' but argument is of type 'const char *' [ 53s] 3379 | insstr(PyObject *d, char *name, char *value) [ 53s] | ~~~~~~^~~~~ [ 53s] At top level: [ 53s] src/pycurl.c:400:22: warning: 'pycurl_ssl_id' defined but not used [-Wunused-function] [ 53s] 400 | static unsigned long pycurl_ssl_id(void) [ 53s] | ^~~~~~~~~~~~~ [ 53s] src/pycurl.c:391:13: warning: 'pycurl_ssl_lock' defined but not used [-Wunused-function] [ 53s] 391 | static void pycurl_ssl_lock(int mode, int n, const char * file, int line) [ 53s] | ^~~~~~~~~~~~~~~ [ 54s] aarch64-tizen-linux-gnu-gcc -pthread -shared -Wl,-z,relro -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -DHAVE_CURL_OPENSSL build/temp.linux-aarch64-2.7/src/pycurl.o -L/usr/lib64 -lcurl -lcrypto -lpython2.7 -o build/lib.linux-aarch64-2.7/pycurl.so [ 54s] + exit 0 [ 54s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.H3dF2E [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd pycurl-7.19.0 [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 [ 54s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 [ 54s] + python setup.py install -O1 --skip-build --root=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 --prefix=/usr [ 55s] Using curl-config (libcurl 7.73.0) [ 55s] running install [ 55s] running install_lib [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64 [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7 [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages/curl [ 55s] copying build/lib.linux-aarch64-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages/curl [ 55s] copying build/lib.linux-aarch64-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages [ 55s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 55s] writing byte-compilation script '/tmp/tmp3U7ZJN.py' [ 55s] /bin/python -O /tmp/tmp3U7ZJN.py [ 55s] removing /tmp/tmp3U7ZJN.py [ 55s] running install_data [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/html [ 55s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/html [ 55s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/html [ 55s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/html [ 55s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/html [ 55s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/html [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/examples [ 55s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/pycurl/tests [ 55s] running install_egg_info [ 55s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/info [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/packages [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/python-pycurl [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc/python-pycurl-7.19.0 [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/gtk-doc [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/doc [ 55s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/man [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 55s] + xargs rm -f -- [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 55s] + xargs rm -f -- [ 55s] + find /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 55s] + xargs rm -f -- [ 55s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 7.19.0-1.1 --unique-debug-src-base python-pycurl-7.19.0-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pycurl-7.19.0 [ 55s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/lib64/python2.7/site-packages/pycurl.so [ 56s] 246 blocks [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debuginfo.manifest [ 56s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pycurl-7.19.0/python-pycurl-debugsource.manifest [ 56s] + /usr/lib/rpm/check-buildroot [ 56s] + /usr/lib/rpm//brp-compress [ 56s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 56s] + /usr/lib/rpm/brp-python-hardlink [ 56s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 [ 56s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.DQFFiE [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd pycurl-7.19.0 [ 56s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 56s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 56s] + python tests/test_internals.py -q [ 56s] gc: collectable [ 56s] gc: collectable [ 56s] gc: collectable [ 56s] gc: collectable [ 56s] Python 2.7.18 (default, Oct 28 2021, 20:53:41) [ 56s] [GCC 9.2.0] [ 56s] PycURL libcurl/7.73.0 OpenSSL/1.1.1k zlib/1.2.11 c-ares/1.17.1 nghttp2/1.41.0 (compiled against 0x74900) [ 56s] PycURL version info (7, '7.73.0', 477440, 'aarch64-tizen-linux-gnu', 2745053, 'OpenSSL/1.1.1k', 0, '1.2.11', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'mqtt', 'pop3', 'pop3s', 'rtsp', 'smb', 'smbs', 'smtp', 'smtps', 'telnet', 'tftp'), '1.17.1', 69889, None) [ 56s] build/lib.linux-aarch64-2.7/pycurl.so, compiled Oct 28 2021 22:35:17 [ 56s] All tests passed. [ 56s] + exit 0 [ 56s] Processing files: python-pycurl-7.19.0-1.1.aarch64 [ 56s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 56s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 56s] [ 56s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 56s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 56s] [ 56s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.CDXREG [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd pycurl-7.19.0 [ 56s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/licenses/python-pycurl [ 56s] + export LC_ALL=C [ 56s] + LC_ALL=C [ 56s] + export LICENSEDIR [ 56s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/licenses/python-pycurl [ 56s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64/usr/share/licenses/python-pycurl [ 56s] + exit 0 [ 56s] Provides: pycurl = 7.19.0-1.1 python-pycurl = 7.19.0-1.1 python-pycurl(aarch-64) = 7.19.0-1.1 [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcurl.so.4()(64bit) libcurl.so.4(CURL_OPENSSL_4)(64bit) libpython2.7.so.1.0()(64bit) python(abi) = 2.7 [ 56s] Processing files: python-pycurl-debugsource-7.19.0-1.1.aarch64 [ 56s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 56s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 56s] [ 56s] Provides: python-pycurl-debugsource = 7.19.0-1.1 python-pycurl-debugsource(aarch-64) = 7.19.0-1.1 [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Processing files: python-pycurl-debuginfo-7.19.0-1.1.aarch64 [ 56s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 56s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 56s] [ 56s] Provides: python-pycurl-debuginfo = 7.19.0-1.1 python-pycurl-debuginfo(aarch-64) = 7.19.0-1.1 [ 56s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 56s] Recommends: python-pycurl-debugsource(aarch-64) = 7.19.0-1.1 [ 56s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 [ 56s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-1.1.src.rpm [ 56s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python-pycurl-7.19.0-1.1.aarch64.rpm [ 56s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python-pycurl-debugsource-7.19.0-1.1.aarch64.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/python-pycurl-debuginfo-7.19.0-1.1.aarch64.rpm [ 57s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.k4I0RE [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd pycurl-7.19.0 [ 57s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-1.1.aarch64 [ 57s] + exit 0 [ 57s] ... checking for files with abuild user/group [ 57s] ... creating baselibs [ 57s] [ 57s] obspw26 finished "build python-pycurl.spec" at Thu Oct 28 22:35:21 UTC 2021. [ 57s] Retried build at Wed Nov 10 01:17:35 2021 returned same result, skipped Retried build at Wed Nov 10 09:58:39 2021 returned same result, skipped Retried build at Wed Nov 10 11:03:41 2021 returned same result, skipped Retried build at Thu Nov 18 21:20:04 2021 returned same result, skipped Retried build at Tue Dec 14 13:40:52 2021 returned same result, skipped Retried build at Sun Jan 16 21:06:41 2022 returned same result, skipped Retried build at Wed Apr 6 10:21:11 2022 returned same result, skipped Retried build at Thu May 26 01:08:02 2022 returned same result, skipped Retried build at Tue May 31 04:32:36 2022 returned same result, skipped