[ 0s] Memory limit set to 87946276KB [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] obspw15 started "build _service:gbs:hal-backend-device-common.spec" at Thu Jun 2 13:16:55 UTC 2022. [ 0s] [ 0s] Building hal-backend-device-common for project 'Tizen:6.5:Unified' repository 'standard' arch 'i586' srcmd5 'a2b66c495ecc63ee0f0f5ec32cc78ce2' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-common.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-common.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:hal-backend-device-common.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/36] preinstalling libmagic-data... [ 1s] [2/36] preinstalling libncurses... [ 1s] [3/36] preinstalling setup... [ 1s] [4/36] preinstalling filesystem... [ 2s] [5/36] preinstalling glibc... [ 2s] [6/36] preinstalling bash... [ 2s] [7/36] preinstalling diffutils... [ 2s] [8/36] preinstalling grep... [ 2s] [9/36] preinstalling libattr... [ 2s] [10/36] preinstalling libbz2... [ 2s] [11/36] preinstalling libcap... [ 2s] [12/36] preinstalling libfreebl3... [ 2s] [13/36] preinstalling libgcc... [ 2s] [14/36] preinstalling liblua... [ 2s] [15/36] preinstalling liblzma... [ 2s] [16/36] preinstalling libpopt... [ 2s] [17/36] preinstalling libreadline... [ 2s] [18/36] preinstalling libsmack... [ 2s] [19/36] preinstalling libsqlite... [ 2s] [20/36] preinstalling libzstd1... [ 3s] [21/36] preinstalling nspr... [ 3s] [22/36] preinstalling sed... [ 3s] [23/36] preinstalling zlib... [ 3s] [24/36] preinstalling coreutils... [ 3s] [25/36] preinstalling libacl... [ 3s] [26/36] preinstalling libelf... [ 3s] [27/36] preinstalling smack... [ 3s] [28/36] preinstalling bzip2... [ 3s] [29/36] preinstalling libmagic... [ 3s] [30/36] preinstalling libxml2... [ 3s] [31/36] preinstalling util-linux... [ 3s] [32/36] preinstalling tar... [ 3s] [33/36] preinstalling util-linux-su... [ 3s] [34/36] preinstalling nss... [ 3s] [35/36] preinstalling libsoftokn3... [ 3s] [36/36] preinstalling rpm... [ 3s] [ 4s] running setup postinstall script [ 4s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 4s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 4s] initializing rpm db... [ 4s] reordering...cycle: gio-branding-upstream -> libgio [ 4s] breaking dependency libgio -> gio-branding-upstream [ 4s] cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] [1/145] installing dlog-config-persistent-logs-6.5.9-5.4 [ 4s] [2/145] installing libmagic-data-5.39-2.48 [ 4s] [3/145] installing setup-0.9-3.1 [ 4s] [4/145] installing filesystem-3.1-1.1 [ 4s] [5/145] installing glibc-2.30-2.10 [ 5s] [6/145] installing bash-3.2.57-2.1 [ 5s] [7/145] installing capi-base-common-0.4.67-3.1 [ 6s] [8/145] installing cpio-2.8-1.1 [ 6s] [9/145] installing diffutils-3.3-1.1 [ 6s] [10/145] installing findutils-4.3.8-2.50 [ 6s] [11/145] installing gdbm-1.8.3-2.127 [ 6s] [12/145] installing hostname-3.23-1.1 [ 6s] [13/145] installing iniparser-4.1-1.1 [ 7s] [14/145] installing libatomic-9.2.0-1.37 [ 7s] [15/145] installing libattr-2.4.48-1.124 [ 8s] [16/145] installing libblkid-2.36-1.8 [ 8s] [17/145] installing libbz2-1.0.8-2.18 [ 8s] [18/145] installing libcap-2.24-2.51 [ 9s] [19/145] installing libexpat-2.2.9-2.7 [ 9s] [20/145] installing libext2fs-1.46.0-1.9 [ 10s] [21/145] installing libffi-3.3-1.123 [ 10s] [22/145] installing libfreebl3-3.34.1-1.76 [ 10s] [23/145] installing libgcc-9.2.0-1.37 [ 11s] [24/145] installing libgomp-9.2.0-1.37 [ 11s] [25/145] installing libitm-9.2.0-1.37 [ 12s] [26/145] installing libjson-0.15-1.1 [ 12s] [27/145] installing libltdl-2.4.2-1.94 [ 12s] [28/145] installing liblua-5.1.5-1.48 [ 13s] [29/145] installing liblzma-5.2.5-3.10 [ 13s] [30/145] installing libopenssl11-1.1.1l-2.39 [ 14s] [31/145] installing libpcre-8.44-1.22 [ 14s] [32/145] installing libpopt-1.16-1.112 [ 15s] [33/145] installing libpython3_9m1_0-3.9.1-2.19 [ 15s] [34/145] installing libquadmath-9.2.0-1.37 [ 16s] [35/145] installing libsmack-1.3.1-2.50 [ 16s] [36/145] installing libsmartcols-2.36-1.8 [ 16s] [37/145] installing libsqlite-3.33.0-1.95 [ 17s] [38/145] installing libuuid-2.36-1.8 [ 17s] [39/145] installing libzstd1-1.4.5-1.45 [ 18s] [40/145] installing m4-1.4.17-1.1 [ 18s] [41/145] installing net-tools-2.0_20121208git-1.1 [ 18s] [42/145] installing nspr-4.12-1.111 [ 18s] [43/145] installing patch-2.7-2.11 [ 18s] [44/145] installing pkg-config-0.28-1.112 [ 19s] [45/145] installing sed-4.1c-2.1 [ 19s] [46/145] installing update-alternatives-1.20.5-1.1 [ 19s] [47/145] installing which-2.17-1.1 [ 19s] [48/145] installing zlib-1.2.11-1.122 [ 19s] [49/145] installing shadow-utils-4.1.4.2-2.9 [ 19s] [50/145] installing build-compare-2015.04.28-1.36 [ 19s] [51/145] installing terminfo-base-full-6.2-1.93 [ 20s] [52/145] installing capi-base-common-devel-0.4.67-3.1 [ 20s] [53/145] installing coreutils-6.9-1.27 [ 20s] [54/145] installing cpp-9.2.0-1.37 [ 21s] [55/145] installing gawk-3.1.5-1.1 [ 21s] [56/145] installing gcc-c++-9.2.0-1.37 [ 22s] [57/145] installing grep-2.5.2-2.1 [ 22s] [58/145] installing libacl-2.2.53-1.124 [ 23s] [59/145] installing libblkid-devel-2.36-1.8 [ 23s] [60/145] installing libcap-tools-2.24-2.51 [ 23s] [61/145] installing libelf-0.178-2.20 [ 23s] [62/145] installing libffi-devel-3.3-1.123 [ 23s] [63/145] installing libglib-2.62.3-1.19 [ 24s] [64/145] installing libmount-2.36-1.8 [ 24s] [65/145] installing libpcreposix-8.44-1.22 [ 25s] [66/145] installing libstdc++-9.2.0-1.37 [ 25s] [67/145] installing make-4.0-1.22 [ 26s] [68/145] installing nss-certs-3.34.1-1.76 [ 26s] [69/145] installing smack-1.3.1-2.50 [ 26s] [70/145] installing bzip2-1.0.8-2.18 [ 26s] [71/145] installing libfdisk-2.36-1.8 [ 26s] [72/145] installing libgfortran-9.2.0-1.37 [ 26s] [73/145] installing libmagic-5.39-2.48 [ 27s] [74/145] installing libxml2-2.9.12-1.41 [ 27s] [75/145] installing perl-5.32.0-2.11 [ 31s] [76/145] installing xz-5.2.5-3.10 [ 31s] [77/145] installing libkmod-28-1.1 [ 31s] [78/145] installing build-mkbaselibs-20120927-1.1 [ 31s] [79/145] installing libstdc++-devel-9.2.0-1.37 [ 32s] [80/145] installing acl-2.2.53-1.124 [ 32s] [81/145] installing file-5.39-2.48 [ 32s] [82/145] installing libgmodule-2.62.3-1.19 [ 32s] [83/145] installing libgthread-2.62.3-1.19 [ 32s] [84/145] installing linux-glibc-devel-3.10-1.130 [ 33s] [85/145] installing tar-1.17-2.1 [ 33s] [86/145] installing autoconf-2.69-1.97 [ 34s] [87/145] installing binutils-2.33.1-2.13 [ 35s] [88/145] installing glibc-locale-2.30-2.10 [ 35s] [89/145] installing gzip-1.3.12-2.112 [ 35s] [90/145] installing libcc1-9.2.0-1.37 [ 36s] [91/145] installing libconfig-1.6-2.1 [ 36s] [92/145] installing libgobject-2.62.3-1.19 [ 37s] [93/145] installing libmount-devel-2.36-1.8 [ 37s] [94/145] installing libubsan-9.2.0-1.37 [ 37s] [95/145] installing pam-1.1.6-1.1 [ 38s] [96/145] installing libncurses6-6.2-1.93 [ 38s] [97/145] installing libpcrecpp-8.44-1.22 [ 38s] [98/145] installing tzdata-2020a-4.1 [ 39s] [99/145] installing dlog-6.5.9-5.4 [ 39s] [100/145] installing libdw-0.178-2.20 [ 40s] [101/145] installing security-config-1.0-8.1 [ 42s] groupadd: group 'dbus' already exists [ 42s] groupadd: group 'priv_appdebugging' already exists [ 42s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 42s] [102/145] installing libarchive-3.5.1-2.15 [ 42s] [103/145] installing shared-mime-info-1.7-1.1 [ 45s] [104/145] installing libncurses-6.2-1.93 [ 45s] [105/145] installing dlog-logger-6.5.9-5.4 [ 45s] [106/145] installing glibc-devel-2.30-2.10 [ 45s] [107/145] installing less-466-1.1 [ 45s] [108/145] installing libconfig-devel-1.6-2.1 [ 45s] [109/145] installing libreadline-5.2-1.41 [ 45s] [110/145] installing libusbgx-0.1.0-2.1 [ 46s] [111/145] installing procps-ng-3.3.16-1.1 [ 46s] [112/145] installing automake-1.15.1-1.88 [ 47s] [113/145] installing libasm-0.178-2.20 [ 47s] [114/145] installing build-20120927-1.1 [ 47s] [115/145] installing libsystemd-244-8.1 [ 47s] [116/145] installing pcre-devel-8.44-1.22 [ 47s] [117/145] installing gcc-9.2.0-1.37 [ 49s] [118/145] installing libusbgx-devel-0.1.0-2.1 [ 49s] [119/145] installing zlib-devel-1.2.11-1.122 [ 49s] [120/145] installing libtool-2.4.2-1.94 [ 49s] [121/145] installing elfutils-0.178-2.20 [ 49s] [122/145] installing libdlog-6.5.9-5.4 [ 50s] [123/145] installing python3-base-3.9.1-2.19 [ 51s] [124/145] installing util-linux-2.36-1.8 [ 51s] [125/145] installing python3-3.9.1-1.14 [ 52s] [126/145] installing libdlog-devel-6.5.9-5.4 [ 52s] [127/145] installing util-linux-su-2.36-1.8 [ 52s] [128/145] installing capi-system-info-0.5.2-5.1 [ 52s] Running capi-system-info %posttrans script [ 52s] I/O warning : failed to load external entity "/etc/config/model-config.xml" [ 52s] iniparser: cannot open /etc/info.ini [ 52s] [129/145] installing cmake-3.16.4-1.1 [ 54s] [130/145] installing systemd-244-8.1 [ 55s] update-alternatives: using /usr/lib/systemd/systemd-shutdown-original to provide /usr/lib/systemd/systemd-shutdown (systemd-shutdown) in auto mode [ 55s] update-alternatives: using /usr/sbin/reboot-original to provide /usr/sbin/reboot (reboot) in auto mode [ 55s] update-alternatives: using /usr/sbin/halt-original to provide /usr/sbin/halt (halt) in auto mode [ 55s] update-alternatives: using /usr/sbin/poweroff-original to provide /usr/sbin/poweroff (poweroff) in auto mode [ 55s] update-alternatives: using /usr/sbin/shutdown-original to provide /usr/sbin/shutdown (shutdown) in auto mode [ 55s] [131/145] installing capi-system-info-devel-0.5.2-5.1 [ 55s] [132/145] installing systemd-devel-244-8.1 [ 55s] [133/145] installing nss-3.34.1-1.76 [ 56s] [134/145] installing libgio-2.62.3-1.19 [ 57s] [135/145] installing gio-branding-upstream-2.62.3-1.19 [ 57s] [136/145] installing libsoftokn3-3.34.1-1.76 [ 57s] [137/145] installing glib2-tools-2.62.3-1.19 [ 57s] [138/145] installing hal-api-common-0.0.1-3.1 [ 57s] [139/145] installing libsyscommon-4.1-6.1 [ 58s] [140/145] installing rpm-4.14.1.1-1.69 [ 58s] [141/145] installing hal-api-device-1.0.0-8.1 [ 59s] [142/145] installing glib2-devel-2.62.3-1.19 [ 59s] [143/145] installing rpm-build-4.14.1.1-1.69 [ 59s] [144/145] installing hal-api-device-devel-1.0.0-8.1 [ 59s] [145/145] installing libsyscommon-devel-4.1-6.1 [ 59s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 59s] now finalizing build dir... [ 59s] Running build time source services... [ 60s] build target is i686-tizen-linux [ 60s] ----------------------------------------------------------------- [ 60s] I have the following modifications for hal-backend-device-common.spec: [ 60s] 5c5 [ 60s] < Release: 1 [ 60s] --- [ 60s] > Release: 4.1 [ 60s] ----------------------------------------------------------------- [ 60s] ----- building hal-backend-device-common.spec (user abuild) [ 60s] ----------------------------------------------------------------- [ 60s] ----------------------------------------------------------------- [ 60s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-device-common.spec [ 60s] Building target platforms: i686-tizen-linux [ 60s] Building for target i686-tizen-linux [ 60s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qOuvMU [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + rm -rf hal-backend-device-common-1 [ 60s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-device-common-1.tar.gz [ 60s] + /bin/tar -xof - [ 60s] + STATUS=0 [ 60s] + '[' 0 -ne 0 ']' [ 60s] + cd hal-backend-device-common-1 [ 60s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 60s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-device-common.manifest . [ 60s] + exit 0 [ 60s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.eJyEFT [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd hal-backend-device-common-1 [ 60s] ++ uname -m [ 60s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 60s] + LANG=C [ 60s] + export LANG [ 60s] + unset DISPLAY [ 60s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 60s] + export CFLAGS [ 60s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 60s] + export CXXFLAGS [ 60s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 60s] + export FFLAGS [ 60s] + LDFLAGS= [ 60s] + export LDFLAGS [ 60s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 60s] + export CFLAGS [ 60s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 60s] + export CXXFLAGS [ 60s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 60s] + export FFLAGS [ 60s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DHAL_LIB_DIR=/hal/lib -DHAL_INCLUDE_DIR=/hal/include -DHAL_LICENSE_DIR=/hal/share/licenses -DENABLE_DLOG=on [ 60s] -- The C compiler identification is GNU 9.2.0 [ 60s] -- Check for working C compiler: /bin/cc [ 60s] -- Check for working C compiler: /bin/cc -- works [ 60s] -- Detecting C compiler ABI info [ 60s] -- Detecting C compiler ABI info - done [ 60s] -- Detecting C compile features [ 60s] -- Detecting C compile features - done [ 60s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 60s] -- Checking for modules 'libusbgx;libsyscommon;dlog;libudev' [ 60s] -- Found libusbgx, version 0.1.0 [ 60s] -- Found libsyscommon, version 4.1 [ 60s] -- Found dlog, version 1.0 [ 60s] -- Found libudev, version 244 [ 60s] -- Configuring done [ 60s] -- Generating done [ 60s] CMake Warning: [ 60s] Manually-specified variables were not used by the project: [ 60s] [ 60s] CMAKE_INSTALL_LIBDIR [ 60s] INCLUDE_INSTALL_DIR [ 60s] SHARE_INSTALL_PREFIX [ 60s] SYSCONF_INSTALL_DIR [ 60s] [ 60s] [ 60s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 [ 60s] + make -j8 [ 60s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 60s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/progress.marks [ 60s] make -f CMakeFiles/Makefile2 all [ 60s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 60s] make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/depend [ 60s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 60s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/hal-backend-device-common.dir/DependInfo.cmake --color= [ 60s] Scanning dependencies of target hal-backend-device-common [ 60s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 60s] make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/build [ 60s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 60s] [ 50%] Building C object CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o [ 60s] /bin/cc -DFEATURE_DLOG -D_GNU_SOURCE -Dhal_backend_device_common_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/system -I/usr/include/dlog -fvisibility=hidden -fPIC -o CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/src/udev/udev.c [ 61s] [100%] Linking C shared library libhal-backend-device-common.so [ 61s] /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-device-common.dir/link.txt --verbose=1 [ 61s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I/usr/include/gio-unix-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -I/usr/include/system -I/usr/include/dlog -fvisibility=hidden -shared -Wl,-soname,libhal-backend-device-common.so -o libhal-backend-device-common.so CMakeFiles/hal-backend-device-common.dir/src/udev/udev.c.o -lusbgx -lconfig -lsyscommon -lgio-2.0 -lgobject-2.0 -lglib-2.0 -ldlog -lcapi-system-info -lcapi-base-common -ldlog -ludev -lcapi-system-info -lcapi-base-common -ludev [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] [100%] Built target hal-backend-device-common [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles 0 [ 61s] + exit 0 [ 61s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.BODJfU [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd hal-backend-device-common-1 [ 61s] + LANG=C [ 61s] + export LANG [ 61s] + unset DISPLAY [ 61s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 [ 61s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 [ 61s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 install [ 61s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 -B/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 61s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/progress.marks [ 61s] /bin/make -f CMakeFiles/Makefile2 all [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] /bin/make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/depend [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] cd /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles/hal-backend-device-common.dir/DependInfo.cmake --color= [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] /bin/make -f CMakeFiles/hal-backend-device-common.dir/build.make CMakeFiles/hal-backend-device-common.dir/build [ 61s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] make[2]: Nothing to be done for 'CMakeFiles/hal-backend-device-common.dir/build'. [ 61s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] [100%] Built target hal-backend-device-common [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/CMakeFiles 0 [ 61s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 61s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] make[1]: Nothing to be done for 'preinstall'. [ 61s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-device-common-1' [ 61s] Install the project... [ 61s] /usr/bin/cmake -P cmake_install.cmake [ 61s] -- Install configuration: "" [ 61s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/hal/lib/libhal-backend-device-common.so [ 61s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/hal/share/licenses/hal-backend-device-common/LICENSE.Apache-2.0 [ 61s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/hal/include/device/hal-backend-common.h [ 61s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/hal/include/device/hal-backend-common-udev.h [ 61s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/usr/lib/pkgconfig/hal-backend-device-common.pc [ 61s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/usr/share/info/dir [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 -regex '.*\.la$' [ 61s] + xargs rm -f -- [ 61s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 -regex '.*\.a$' [ 61s] + xargs rm -f -- [ 61s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1-4.1 --unique-debug-src-base hal-backend-device-common-1-4.1.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1 [ 61s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386/hal/lib/libhal-backend-device-common.so [ 61s] 15 blocks [ 61s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/hal-backend-device-common-debuginfo.manifest [ 61s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-device-common-1/hal-backend-device-common-debugsource.manifest [ 61s] + /usr/lib/rpm/check-buildroot [ 61s] + /usr/lib/rpm//brp-compress [ 61s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 61s] + /usr/lib/rpm/brp-python-hardlink [ 61s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 [ 61s] Processing files: hal-backend-device-common-1-4.1.i686 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: hal-backend-device-common = 1-4.1 hal-backend-device-common(x86-32) = 1-4.1 libhal-backend-device-common.so [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libdlog.so.0 libglib-2.0.so.0 libudev.so.1 libudev.so.1(LIBUDEV_183) [ 61s] Processing files: hal-backend-device-common-debugsource-1-4.1.i686 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: hal-backend-device-common-debugsource = 1-4.1 hal-backend-device-common-debugsource(x86-32) = 1-4.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Processing files: hal-backend-device-common-devel-1-4.1.i686 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: hal-backend-device-common-devel = 1-4.1 hal-backend-device-common-devel(x86-32) = 1-4.1 pkgconfig(hal-backend-device-common) = 1.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Requires: /usr/bin/pkg-config pkgconfig(dlog) pkgconfig(libudev) [ 61s] Processing files: hal-backend-device-common-debuginfo-1-4.1.i686 [ 61s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 61s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 61s] [ 61s] Provides: hal-backend-device-common-debuginfo = 1-4.1 hal-backend-device-common-debuginfo(x86-32) = 1-4.1 [ 61s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 61s] Recommends: hal-backend-device-common-debugsource(x86-32) = 1-4.1 [ 61s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 [ 61s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-device-common-1-4.1.src.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-1-4.1.i686.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-debugsource-1-4.1.i686.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-devel-1-4.1.i686.rpm [ 61s] Wrote: /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-debuginfo-1-4.1.i686.rpm [ 61s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ZcsJ6S [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd hal-backend-device-common-1 [ 61s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-device-common-1-4.1.i386 [ 61s] + exit 0 [ 61s] ... checking for files with abuild user/group [ 61s] ... creating baselibs [ 61s] ... comparing built packages with the former built [ 61s] /usr/lib/build/pkg-diff.sh [ 61s] compare /.build.oldpackages/hal-backend-device-common-1-3.2.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-device-common-1-4.1.src.rpm [ 61s] This is not a prerelease project. Compare the project name. [ 61s] comparing rpmtags [ 61s] comparing RELEASE [ 61s] comparing PROVIDES [ 61s] comparing scripts [ 61s] comparing filelist [ 61s] comparing file checksum [ 61s] RPM meta information is identical [ 61s] compare /.build.oldpackages/hal-backend-device-common-1-3.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-1-4.1.i686.rpm [ 61s] Comparing hal-backend-device-common-1-3.2.i686.rpm to hal-backend-device-common-1-4.1.i686.rpm [ 61s] This is not a prerelease project. Compare the project name. [ 61s] comparing rpmtags [ 61s] --- /tmp/tmp.fbBAj28885/tmp.ZdtMq28897 2022-06-02 13:17:56.792875343 +0000 [ 61s] +++ /tmp/tmp.fbBAj28885/tmp.RsWKh28898 2022-06-02 13:17:56.804874935 +0000 [ 61s] @@ -8,4 +8,4 @@ [ 61s] cpio xz 5T [ 61s] [ 61s] (none) (none) (none) [ 61s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/d6f831db362d835a64b5970e45b29f51-hal-backend-device-common Tizen:6.5:Unified [ 61s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common Tizen:6.5:Unified [ 61s] RPM meta information is different [ 61s] compare /.build.oldpackages/hal-backend-device-common-debuginfo-1-3.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-debuginfo-1-4.1.i686.rpm [ 61s] skipping -debuginfo package [ 61s] compare /.build.oldpackages/hal-backend-device-common-debugsource-1-3.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-debugsource-1-4.1.i686.rpm [ 61s] Comparing hal-backend-device-common-debugsource-1-3.2.i686.rpm to hal-backend-device-common-debugsource-1-4.1.i686.rpm [ 61s] This is not a prerelease project. Compare the project name. [ 61s] comparing rpmtags [ 61s] --- /tmp/tmp.qhLtW28918/tmp.cFhxD28930 2022-06-02 13:17:56.892871939 +0000 [ 61s] +++ /tmp/tmp.qhLtW28918/tmp.SnlWf28931 2022-06-02 13:17:56.896871803 +0000 [ 61s] @@ -10,4 +10,4 @@ [ 61s] cpio xz 5T [ 61s] [ 61s] (none) (none) (none) [ 61s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/d6f831db362d835a64b5970e45b29f51-hal-backend-device-common Tizen:6.5:Unified [ 61s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common Tizen:6.5:Unified [ 61s] RPM meta information is different [ 61s] compare /.build.oldpackages/hal-backend-device-common-devel-1-3.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/hal-backend-device-common-devel-1-4.1.i686.rpm [ 61s] Comparing hal-backend-device-common-devel-1-3.2.i686.rpm to hal-backend-device-common-devel-1-4.1.i686.rpm [ 61s] This is not a prerelease project. Compare the project name. [ 61s] comparing rpmtags [ 61s] --- /tmp/tmp.rdnXc28948/tmp.zEwjc28961 2022-06-02 13:17:56.964869488 +0000 [ 61s] +++ /tmp/tmp.rdnXc28948/tmp.XppCE28963 2022-06-02 13:17:56.972869215 +0000 [ 61s] @@ -8,4 +8,4 @@ [ 61s] cpio xz 5T [ 61s] [ 61s] (none) (none) (none) [ 61s] -obs://build.tizen.org/Tizen:6.5:Unified/standard/d6f831db362d835a64b5970e45b29f51-hal-backend-device-common Tizen:6.5:Unified [ 61s] +obs://build.tizen.org/Tizen:6.5:Unified/standard/a2b66c495ecc63ee0f0f5ec32cc78ce2-hal-backend-device-common Tizen:6.5:Unified [ 61s] RPM meta information is different [ 62s] [ 62s] obspw15 finished "build hal-backend-device-common.spec" at Thu Jun 2 13:17:57 UTC 2022. [ 62s] Retried build at Fri Jun 10 14:13:09 2022 returned same result, skipped