[ 0s] on X86_64, no limit mem size [ 1s] Using BUILD_ROOT=/var/cache/build/root_1 [ 1s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 1s] [ 1s] [ 1s] obspw19 started "build _service:gbs:stability-monitor-kmod-rpi3.spec" at Tue May 31 05:31:03 UTC 2022. [ 1s] [ 1s] Building stability-monitor-kmod-rpi3 for project 'Tizen:6.5:Unified' repository 'standard' arch 'armv7l' srcmd5 'b6d7e203814db35d4f7da1f6f42647cf' [ 1s] [ 1s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:stability-monitor-kmod-rpi3.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling libzstd1... [ 2s] [8/41] preinstalling bash... [ 2s] [9/41] preinstalling diffutils... [ 2s] [10/41] preinstalling grep... [ 2s] [11/41] preinstalling libattr... [ 2s] [12/41] preinstalling libblkid... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 2s] [16/41] preinstalling liblua... [ 2s] [17/41] preinstalling liblzma... [ 2s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libsqlite... [ 2s] [22/41] preinstalling libuuid... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 8s] [28/41] preinstalling coreutils... [ 9s] [29/41] preinstalling libacl... [ 9s] [30/41] preinstalling libelf... [ 9s] [31/41] preinstalling libmount... [ 9s] [32/41] preinstalling smack... [ 9s] [33/41] preinstalling bzip2... [ 9s] [34/41] preinstalling libmagic... [ 9s] [35/41] preinstalling libxml2... [ 9s] [36/41] preinstalling tar... [ 9s] [37/41] preinstalling util-linux... [ 9s] [38/41] preinstalling util-linux-su... [ 9s] [39/41] preinstalling nss... [ 9s] [40/41] preinstalling libsoftokn3... [ 9s] [41/41] preinstalling rpm... [ 9s] [ 9s] running qemu-linux-user-x86_64-cross postinstall script [ 9s] running qemu-accel-x86_64-armv7l postinstall script [ 9s] running setup postinstall script [ 9s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 9s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 9s] initializing rpm db... [ 10s] reordering...cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 10s] [1/103] installing libmagic-data-5.39-2.52 [ 10s] [2/103] installing setup-0.9-3.1 [ 10s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [3/103] installing filesystem-3.1-1.1 [ 10s] [4/103] installing glibc-2.30-2.10 [ 11s] [5/103] installing libatomic-9.2.0-1.46 [ 11s] [6/103] installing libgcc-9.2.0-1.46 [ 12s] [7/103] installing libzstd1-1.4.5-1.82 [ 12s] [8/103] installing bash-3.2.57-2.1 [ 12s] [9/103] installing cpio-2.8-1.1 [ 12s] [10/103] installing diffutils-3.3-1.1 [ 12s] [11/103] installing findutils-4.3.8-2.59 [ 12s] [12/103] installing gdbm-1.8.3-2.140 [ 12s] [13/103] installing hostname-3.23-1.1 [ 12s] [14/103] installing libattr-2.4.48-1.140 [ 13s] [15/103] installing libblkid-2.36-1.7 [ 13s] [16/103] installing libbz2-1.0.8-2.22 [ 13s] [17/103] installing libcap-2.24-2.62 [ 14s] [18/103] installing libexpat-2.2.9-2.8 [ 14s] [19/103] installing libext2fs-1.46.0-1.8 [ 14s] [20/103] installing libfreebl3-3.34.1-1.91 [ 15s] [21/103] installing libgfortran-9.2.0-1.46 [ 15s] [22/103] installing libgomp-9.2.0-1.46 [ 15s] [23/103] installing libitm-9.2.0-1.46 [ 16s] [24/103] installing libltdl-2.4.2-1.98 [ 16s] [25/103] installing liblua-5.1.5-1.46 [ 16s] [26/103] installing liblzma-5.2.5-3.10 [ 17s] [27/103] installing libopenssl11-1.1.1l-2.51 [ 17s] [28/103] installing libpcre-8.44-1.8 [ 17s] [29/103] installing libpopt-1.16-1.133 [ 18s] [30/103] installing libsmack-1.3.1-2.58 [ 18s] [31/103] installing libsmartcols-2.36-1.7 [ 18s] [32/103] installing libsqlite-3.33.0-1.113 [ 19s] [33/103] installing libstdc++-9.2.0-1.46 [ 19s] [34/103] installing libunwind-1.3.1-2.6 [ 20s] [35/103] installing libuuid-2.36-1.7 [ 20s] [36/103] installing m4-1.4.17-1.1 [ 20s] [37/103] installing net-tools-2.0_20121208git-1.1 [ 20s] [38/103] installing nspr-4.12-1.127 [ 20s] [39/103] installing patch-2.7-2.16 [ 20s] [40/103] installing pkg-config-0.28-1.119 [ 20s] [41/103] installing sed-4.1c-2.1 [ 20s] [42/103] installing update-alternatives-1.20.5-1.1 [ 20s] [43/103] installing which-2.17-1.1 [ 20s] [44/103] installing zlib-1.2.11-1.135 [ 21s] [45/103] installing build-compare-2015.04.28-1.38 [ 21s] [46/103] installing libstdc++-devel-9.2.0-1.46 [ 21s] [47/103] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 23s] [48/103] installing terminfo-base-full-6.2-1.97 [ 23s] [49/103] installing cpp-9.2.0-1.46 [ 24s] [50/103] installing gcc-c++-9.2.0-1.46 [ 25s] [51/103] installing binutils-2.33.1-2.13 [ 25s] [52/103] installing coreutils-6.9-1.28 [ 25s] [53/103] installing gawk-3.1.5-1.1 [ 25s] [54/103] installing grep-2.5.2-2.1 [ 25s] [55/103] installing libacl-2.2.53-1.141 [ 26s] [56/103] installing libcc1-9.2.0-1.46 [ 26s] [57/103] installing libelf-0.178-2.21 [ 26s] [58/103] installing libmount-2.36-1.7 [ 27s] [59/103] installing libubsan-9.2.0-1.46 [ 27s] [60/103] installing make-4.0-1.23 [ 27s] [61/103] installing nss-certs-3.34.1-1.91 [ 27s] [62/103] installing smack-1.3.1-2.58 [ 27s] [63/103] installing bzip2-1.0.8-2.22 [ 27s] [64/103] installing kmod-28-1.1 [ 27s] [65/103] installing libfdisk-2.36-1.7 [ 28s] [66/103] installing libmagic-5.39-2.52 [ 28s] [67/103] installing libxml2-2.9.12-1.34 [ 28s] [68/103] installing perl-5.32.0-2.8 [ 31s] [69/103] installing xz-5.2.5-3.10 [ 31s] [70/103] installing build-mkbaselibs-20120927-1.1 [ 31s] [71/103] installing kmod-compat-28-1.1 [ 31s] [72/103] installing linux-glibc-devel-3.10-1.147 [ 31s] [73/103] installing autoconf-2.69-1.101 [ 32s] [74/103] installing file-5.39-2.52 [ 32s] [75/103] installing glibc-locale-2.30-2.10 [ 32s] [76/103] installing tar-1.17-2.1 [ 33s] [77/103] installing gzip-1.3.12-2.133 [ 33s] [78/103] installing libncurses6-6.2-1.97 [ 33s] [79/103] installing pam-1.1.6-1.1 [ 33s] [80/103] installing tzdata-2020a-4.1 [ 34s] [81/103] installing libdw-0.178-2.21 [ 34s] [82/103] installing arm-rpi4-linux-kernel-devel-5.10.25-12.3 [ 48s] [83/103] installing libarchive-3.5.1-2.19 [ 48s] [84/103] installing gcc-9.2.0-1.46 [ 49s] [85/103] installing libncurses-6.2-1.97 [ 49s] [86/103] installing glibc-devel-2.30-2.10 [ 49s] [87/103] installing qemu-accel-x86_64-armv7l-0.4-2.13 [ 56s] [88/103] installing automake-1.15.1-1.92 [ 57s] [89/103] installing less-466-1.1 [ 57s] [90/103] installing libreadline-5.2-1.39 [ 57s] [91/103] installing procps-ng-3.3.16-1.1 [ 57s] [92/103] installing libasm-0.178-2.21 [ 58s] [93/103] installing build-20120927-1.1 [ 58s] [94/103] installing cmake-3.16.4-1.1 [ 59s] [95/103] installing arm-rpi3-linux-kernel-devel-4.19.49-2.7 [ 71s] [96/103] installing libtool-2.4.2-1.98 [ 71s] [97/103] installing elfutils-0.178-2.21 [ 71s] [98/103] installing util-linux-2.36-1.7 [ 72s] [99/103] installing util-linux-su-2.36-1.7 [ 72s] [100/103] installing nss-3.34.1-1.91 [ 72s] [101/103] installing libsoftokn3-3.34.1-1.91 [ 72s] [102/103] installing rpm-4.14.1.1-1.66 [ 73s] [103/103] installing rpm-build-4.14.1.1-1.66 [ 73s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 73s] now finalizing build dir... [ 74s] Running build time source services... [ 74s] build target is armv7l-tizen-linux [ 74s] ----------------------------------------------------------------- [ 74s] I have the following modifications for stability-monitor-kmod-rpi3.spec: [ 74s] 12c12 [ 74s] < Release: 0 [ 74s] --- [ 74s] > Release: 1.9 [ 74s] ----------------------------------------------------------------- [ 74s] ----- building stability-monitor-kmod-rpi3.spec (user abuild) [ 74s] ----------------------------------------------------------------- [ 74s] ----------------------------------------------------------------- [ 74s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:6.5:Unified/standard/b6d7e203814db35d4f7da1f6f42647cf-stability-monitor-kmod-rpi3' -ba /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.spec [ 74s] Building target platforms: armv7l-tizen-linux [ 74s] Building for target armv7l-tizen-linux [ 74s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.hTn369 [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + rm -rf stability-monitor-kmod-rpi3-6.4.0 [ 74s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3-6.4.0.tar.xz [ 74s] + /bin/tar -xof - [ 74s] + STATUS=0 [ 74s] + '[' 0 -ne 0 ']' [ 74s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 74s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 74s] + cp /home/abuild/rpmbuild/SOURCES/stability-monitor-kmod-rpi3.manifest ./stability-monitor-kmod-rpi3.manifest [ 74s] + exit 0 [ 74s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Y7soVc [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 74s] ++ uname -m [ 74s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 74s] + LANG=C [ 74s] + export LANG [ 74s] + unset DISPLAY [ 74s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + LDFLAGS= [ 74s] + export LDFLAGS [ 74s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON -DLIBPATH=/usr/lib [ 74s] CMake Warning: [ 74s] No source or binary directory provided. Both will be assumed to be the [ 74s] same as the current working directory, but note that this warning will [ 74s] become a fatal error in future CMake releases. [ 74s] [ 74s] [ 74s] -- The C compiler identification is GNU 9.2.0 [ 74s] -- Check for working C compiler: /bin/cc [ 74s] -- Check for working C compiler: /bin/cc -- works [ 74s] -- Detecting C compiler ABI info [ 75s] -- Detecting C compiler ABI info - done [ 75s] -- Detecting C compile features [ 75s] -- Detecting C compile features - done [ 75s] -- Configuring done [ 75s] -- Generating done [ 75s] CMake Warning: [ 75s] Manually-specified variables were not used by the project: [ 75s] [ 75s] BUILD_SHARED_LIBS [ 75s] CMAKE_INSTALL_LIBDIR [ 75s] CMAKE_SKIP_RPATH [ 75s] INCLUDE_INSTALL_DIR [ 75s] LIB_INSTALL_DIR [ 75s] SHARE_INSTALL_PREFIX [ 75s] SYSCONF_INSTALL_DIR [ 75s] [ 75s] [ 75s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 75s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 [ 75s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 75s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 75s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 75s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 75s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 75s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3/ [ 75s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 75s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3/ M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel modules [ 75s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 76s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.o [ 77s] Building modules, stage 2. [ 77s] MODPOST 1 modules [ 77s] CC /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.mod.o [ 77s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 77s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 77s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 77s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 INSTALL_MOD_STRIP=1 [ 77s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 77s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/../ modules_install [ 77s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 78s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 78s] DEPMOD 4.19.49-arm-rpi3-v7 [ 78s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/4.19.49-arm-rpi3-v7: No such file or directory [ 78s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/4.19.49-arm-rpi3-v7: No such file or directory [ 78s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 78s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 78s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 78s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 79s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 79s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 79s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 79s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 79s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 79s] + make -C kernel KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 79s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 79s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel modules [ 79s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 80s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.o [ 80s] MODPOST /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 80s] CC [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.mod.o [ 81s] LD [M] /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 81s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 81s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 81s] + make -C kernel modules_install KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 INSTALL_MOD_STRIP=1 [ 81s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 81s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/../ modules_install [ 81s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 81s] INSTALL /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/proc-tsm.ko [ 81s] DEPMOD 5.10.25-arm-rpi4-v7l [ 82s] depmod: WARNING: could not open modules.order at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/5.10.25-arm-rpi4-v7l: No such file or directory [ 82s] depmod: WARNING: could not open modules.builtin at /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/..//lib/modules/5.10.25-arm-rpi4-v7l: No such file or directory [ 82s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 82s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 82s] + exit 0 [ 82s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5qfRsd [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 82s] + LANG=C [ 82s] + export LANG [ 82s] + unset DISPLAY [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm [ 82s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm [ 82s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm//usr/lib/stability-monitor [ 82s] + pushd lib/modules [ 82s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/lib/modules ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 82s] + find -name '*.ko' -exec cp -a --parents '{}' /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm//usr/lib/stability-monitor/ ';' [ 82s] + popd [ 82s] ~/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 82s] + install -D config/stability-monitor.conf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm/etc/modprobe.d/stability-monitor.conf [ 82s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 6.4.0-1.9 --unique-debug-src-base stability-monitor-kmod-rpi3-6.4.0-1.9.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0 [ 82s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/stability-monitor-kmod-rpi3-debuginfo.manifest [ 82s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/stability-monitor-kmod-rpi3-debugsource.manifest [ 82s] + /usr/lib/rpm/check-buildroot [ 82s] + /usr/lib/rpm//brp-compress [ 82s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 82s] + /usr/lib/rpm/brp-python-hardlink [ 82s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm [ 82s] Processing files: stability-monitor-kmod-rpi3-6.4.0-1.9.armv7l [ 82s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 82s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 82s] [ 82s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.t2MKpa [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 82s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 82s] + export LC_ALL=C [ 82s] + LC_ALL=C [ 82s] + export LICENSEDIR [ 82s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 82s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm/usr/share/licenses/stability-monitor-kmod-rpi3 [ 82s] + exit 0 [ 82s] Provides: stability-monitor-kernel-module stability-monitor-kmod-rpi3 = 6.4.0-1.9 stability-monitor-kmod-rpi3(armv7l-32) = 6.4.0-1.9 [ 82s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 82s] Processing files: stability-monitor-kmod-rpi3-debugsource-6.4.0-1.9.armv7l [ 82s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/debugsourcefiles.list [ 82s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 82s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 82s] [ 82s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm [ 82s] Wrote: /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.4.0-1.9.src.rpm [ 82s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-6.4.0-1.9.armv7l.rpm [ 82s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-debugsource-6.4.0-1.9.armv7l.rpm [ 82s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.waDImb [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd stability-monitor-kmod-rpi3-6.4.0 [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/stability-monitor-kmod-rpi3-6.4.0-1.9.arm [ 82s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi3 [ 82s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 82s] make -C /boot/kernel/devel/kernel-devel-arm-rpi3 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 82s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 83s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/.tmp_versions [ 83s] CLEAN /home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel/Module.symvers [ 83s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi3' [ 83s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 83s] + make -C kernel clean KERNELDIR=/boot/kernel/devel/kernel-devel-arm-rpi4 [ 83s] make: Entering directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 83s] make -C /boot/kernel/devel/kernel-devel-arm-rpi4 M=/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel clean [ 83s] make[1]: Entering directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 83s] make[1]: Leaving directory '/boot/kernel/devel/kernel-devel-arm-rpi4' [ 83s] make: Leaving directory '/home/abuild/rpmbuild/BUILD/stability-monitor-kmod-rpi3-6.4.0/kernel' [ 83s] + rm -rf '/home/abuild/rpmbuild/BUILD/%{Name}-6.4.0/lib' [ 83s] + exit 0 [ 83s] ... checking for files with abuild user/group [ 83s] ... creating baselibs [ 84s] ... comparing built packages with the former built [ 84s] /usr/lib/build/pkg-diff.sh [ 84s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.4.0-1.8.src.rpm /home/abuild/rpmbuild/SRPMS/stability-monitor-kmod-rpi3-6.4.0-1.9.src.rpm [ 84s] This is not a prerelease project. Compare the project name. [ 84s] comparing rpmtags [ 84s] comparing RELEASE [ 84s] comparing PROVIDES [ 84s] comparing scripts [ 84s] comparing filelist [ 84s] comparing file checksum [ 84s] RPM meta information is identical [ 85s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-6.4.0-1.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-6.4.0-1.9.armv7l.rpm [ 85s] Comparing stability-monitor-kmod-rpi3-6.4.0-1.8.armv7l.rpm to stability-monitor-kmod-rpi3-6.4.0-1.9.armv7l.rpm [ 85s] This is not a prerelease project. Compare the project name. [ 85s] comparing rpmtags [ 85s] comparing RELEASE [ 85s] comparing PROVIDES [ 85s] comparing scripts [ 85s] comparing filelist [ 85s] comparing file checksum [ 85s] creating rename script [ 85s] RPM file checksum differs. [ 85s] Extracting packages [ 85s] /usr/lib/stability-monitor/4.19.49-arm-rpi3-v7/extra/proc-tsm.ko differs in ELF section .comment [ 85s] --- /tmp/tmp.FwLHU64645/tmp.oWLeY64744 2022-05-31 05:32:27.588493498 +0000 [ 85s] +++ /tmp/tmp.FwLHU64645/tmp.qlNPc64746 2022-05-31 05:32:27.592493345 +0000 [ 85s] @@ -4,7 +4,7 @@ [ 85s] Contents of section .comment: [ 85s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 85s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 85s] - 0020 322e3929 20392e32 2e300000 4743433a 2.9) 9.2.0..GCC: [ 85s] - 0030 20285469 7a656e20 47434320 392e322e (Tizen GCC 9.2. [ 85s] - 0040 30203230 31393038 31322032 2e392920 0 20190812 2.9) [ 85s] - 0050 392e322e 3000 9.2.0. [ 85s] + 0020 322e3132 2920392e 322e3000 00474343 2.12) 9.2.0..GCC [ 85s] + 0030 3a202854 697a656e 20474343 20392e32 : (Tizen GCC 9.2 [ 85s] + 0040 2e302032 30313930 38313220 322e3132 .0 20190812 2.12 [ 85s] + 0050 2920392e 322e3000 ) 9.2.0. [ 85s] compare /.build.oldpackages/stability-monitor-kmod-rpi3-debugsource-6.4.0-1.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/stability-monitor-kmod-rpi3-debugsource-6.4.0-1.9.armv7l.rpm [ 85s] Comparing stability-monitor-kmod-rpi3-debugsource-6.4.0-1.8.armv7l.rpm to stability-monitor-kmod-rpi3-debugsource-6.4.0-1.9.armv7l.rpm [ 85s] This is not a prerelease project. Compare the project name. [ 85s] comparing rpmtags [ 85s] comparing RELEASE [ 85s] comparing PROVIDES [ 85s] comparing scripts [ 85s] comparing filelist [ 85s] comparing file checksum [ 85s] creating rename script [ 85s] RPM meta information is identical [ 86s] [ 86s] obspw19 finished "build stability-monitor-kmod-rpi3.spec" at Tue May 31 05:32:28 UTC 2022. [ 86s] Retried build at Thu Jun 16 14:44:13 2022 returned same result, skipped