[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] obspw10 started "build _service:gbs:pcre.spec" at Fri Sep 18 05:51:20 UTC 2020. [ 0s] [ 0s] Building pcre for project 'Tizen:Base:Tool' repository 'standard' arch 'aarch64' srcmd5 '687055a6077528bb31f848f74208eb71' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/36] preinstalling libmagic-data... [ 1s] [2/36] preinstalling libncurses... [ 1s] [3/36] preinstalling setup... [ 1s] [4/36] preinstalling filesystem... [ 1s] [5/36] preinstalling glibc... [ 1s] [6/36] preinstalling bash... [ 1s] [7/36] preinstalling diffutils... [ 1s] [8/36] preinstalling grep... [ 1s] [9/36] preinstalling libattr... [ 1s] [10/36] preinstalling libbz2... [ 1s] [11/36] preinstalling libcap... [ 1s] [12/36] preinstalling libfreebl3... [ 1s] [13/36] preinstalling libgcc... [ 1s] [14/36] preinstalling liblua... [ 1s] [15/36] preinstalling liblzma... [ 1s] [16/36] preinstalling libpopt... [ 1s] [17/36] preinstalling libreadline... [ 1s] [18/36] preinstalling libsmack... [ 1s] [19/36] preinstalling libsqlite... [ 1s] [20/36] preinstalling nspr... [ 1s] [21/36] preinstalling sed... [ 1s] [22/36] preinstalling zlib... [ 1s] [23/36] preinstalling qemu-linux-user-x86_64-cross... [ 2s] [24/36] preinstalling coreutils... [ 2s] [25/36] preinstalling libacl... [ 2s] [26/36] preinstalling libelf... [ 2s] [27/36] preinstalling smack... [ 2s] [28/36] preinstalling bzip2... [ 2s] [29/36] preinstalling libmagic... [ 2s] [30/36] preinstalling libxml2... [ 2s] [31/36] preinstalling util-linux... [ 2s] [32/36] preinstalling tar... [ 2s] [33/36] preinstalling util-linux-su... [ 3s] [34/36] preinstalling nss... [ 3s] [35/36] preinstalling libsoftokn3... [ 3s] [36/36] preinstalling rpm... [ 3s] [ 3s] running qemu-linux-user-x86_64-cross postinstall script [ 3s] mount: error while loading shared libraries: libmount.so.1: cannot open shared object file: No such file or directory [ 3s] cat: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 3s] cat: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 3s] cat: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 3s] running setup postinstall script [ 3s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 3s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 3s] initializing rpm db... [ 4s] reordering...cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] [1/92] installing libmagic-data-5.37-3.47 [ 5s] [2/92] installing setup-0.9-4.1 [ 5s] [3/92] installing filesystem-3.1-3.1 [ 5s] [4/92] installing glibc-2.30-5.2 [ 7s] [5/92] installing bash-3.2.57-4.1 [ 7s] [6/92] installing cpio-2.11-3.1 [ 7s] [7/92] installing diffutils-3.3-3.1 [ 7s] [8/92] installing findutils-4.3.8-3.51 [ 8s] [9/92] installing gdbm-1.8.3-3.60 [ 9s] [10/92] installing hostname-3.23-3.1 [ 9s] [11/92] installing libatomic-9.2.0-5.2 [ 10s] [12/92] installing libattr-2.4.47-3.58 [ 11s] [13/92] installing libblkid-2.34-4.3 [ 12s] [14/92] installing libbz2-1.0.8-4.6 [ 13s] [15/92] installing libcap-2.24-3.58 [ 14s] [16/92] installing libext2fs-1.43.4-3.1 [ 15s] [17/92] installing libfreebl3-3.34.1-3.36 [ 16s] [18/92] installing libgcc-9.2.0-5.2 [ 17s] [19/92] installing libgomp-9.2.0-5.2 [ 19s] [20/92] installing libitm-9.2.0-5.2 [ 20s] [21/92] installing libltdl-2.4.2-3.30 [ 21s] [22/92] installing liblua-5.1.5-3.64 [ 22s] [23/92] installing liblzma-5.2.4-3.47 [ 23s] [24/92] installing libpcre-8.43-3.8 [ 24s] [25/92] installing libpopt-1.16-3.58 [ 25s] [26/92] installing libsmack-1.3.1-3.56 [ 26s] [27/92] installing libsmartcols-2.34-4.3 [ 27s] [28/92] installing libsqlite-3.31.1-3.46 [ 28s] [29/92] installing libuuid-2.34-4.3 [ 29s] [30/92] installing m4-1.4.17-2.1 [ 29s] [31/92] installing net-tools-2.0_20121208git-3.1 [ 29s] [32/92] installing nspr-4.12-3.56 [ 31s] [33/92] installing patch-2.7-3.51 [ 31s] [34/92] installing pkg-config-0.28-3.49 [ 31s] [35/92] installing sed-4.1c-3.1 [ 31s] [36/92] installing update-alternatives-1.18.15-2.1 [ 32s] [37/92] installing which-2.20-3.1 [ 32s] [38/92] installing zlib-1.2.11-3.51 [ 33s] [39/92] installing build-compare-2015.04.28-3.15 [ 33s] [40/92] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 37s] mount: error while loading shared libraries: libmount.so.1: cannot open shared object file: No such file or directory [ 37s] cat: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 37s] /var/tmp/rpm-tmp.gOZpS1: line 8: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 37s] /var/tmp/rpm-tmp.gOZpS1: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 37s] cat: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 37s] /var/tmp/rpm-tmp.gOZpS1: line 8: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 37s] /var/tmp/rpm-tmp.gOZpS1: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 37s] cat: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 37s] /var/tmp/rpm-tmp.gOZpS1: line 8: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 37s] /var/tmp/rpm-tmp.gOZpS1: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 37s] warning: %post(qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1.aarch64) scriptlet failed, exit status 1 [ 37s] [41/92] installing terminfo-base-full-6.1_20191207-3.40 [ 39s] [42/92] installing coreutils-6.9-4.5 [ 39s] [43/92] installing cpp-9.2.0-5.2 [ 41s] [44/92] installing gawk-3.1.5-4.1 [ 42s] [45/92] installing gcc-c++-9.2.0-5.2 [ 44s] [46/92] installing grep-2.5.2-3.1 [ 45s] [47/92] installing libacl-2.2.52-3.55 [ 46s] [48/92] installing libelf-0.178-3.7 [ 47s] [49/92] installing libgfortran-9.2.0-5.2 [ 48s] [50/92] installing libmount-2.34-4.3 [ 49s] [51/92] installing libstdc++-9.2.0-5.2 [ 50s] [52/92] installing make-4.0-2.7 [ 51s] [53/92] installing nss-certs-3.34.1-3.36 [ 51s] [54/92] installing smack-1.3.1-3.56 [ 52s] [55/92] installing bzip2-1.0.8-4.6 [ 52s] [56/92] installing libfdisk-2.34-4.3 [ 53s] [57/92] installing libmagic-5.37-3.47 [ 54s] [58/92] installing libxml2-2.9.10-3.46 [ 55s] [59/92] installing perl-5.30.0-2.24 [ 62s] [60/92] installing xz-5.2.4-3.47 [ 63s] [61/92] installing build-mkbaselibs-20120927-3.1 [ 63s] [62/92] installing libstdc++-devel-9.2.0-5.2 [ 64s] [63/92] installing file-5.37-3.47 [ 64s] [64/92] installing linux-glibc-devel-3.10-3.58 [ 66s] [65/92] installing tar-1.17-2.1 [ 67s] [66/92] installing autoconf-2.69-3.30 [ 68s] [67/92] installing binutils-2.33.1-5.3 [ 69s] [68/92] installing glibc-locale-2.30-5.2 [ 71s] [69/92] installing gzip-1.3.12-3.57 [ 72s] [70/92] installing libcc1-9.2.0-5.2 [ 73s] [71/92] installing libubsan-9.2.0-5.2 [ 74s] [72/92] installing pam-1.1.6-3.1 [ 75s] [73/92] installing libncurses6-6.1_20191207-3.40 [ 76s] [74/92] installing tzdata-2019c-2.1 [ 78s] [75/92] installing libdw-0.178-3.7 [ 79s] [76/92] installing libncurses-6.1_20191207-3.40 [ 79s] [77/92] installing glibc-devel-2.30-5.2 [ 80s] [78/92] installing less-466-3.1 [ 80s] [79/92] installing libreadline-5.2-2.56 [ 81s] [80/92] installing procps-ng-3.3.15-2.1 [ 82s] [81/92] installing automake-1.15.1-3.35 [ 83s] [82/92] installing libasm-0.178-3.7 [ 84s] [83/92] installing build-20120927-3.1 [ 84s] [84/92] installing gcc-9.2.0-5.2 [ 86s] [85/92] installing libtool-2.4.2-3.30 [ 87s] [86/92] installing elfutils-0.178-3.7 [ 87s] [87/92] installing util-linux-2.34-4.3 [ 88s] [88/92] installing util-linux-su-2.34-4.3 [ 88s] [89/92] installing nss-3.34.1-3.36 [ 89s] [90/92] installing libsoftokn3-3.34.1-3.36 [ 90s] [91/92] installing rpm-4.11.0.1-2.27 [ 92s] [92/92] installing rpm-build-4.11.0.1-2.27 [ 92s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 92s] now finalizing build dir... [ 93s] Running build time source services... [ 93s] build target is aarch64-tizen-linux [ 93s] ----------------------------------------------------------------- [ 93s] I have the following modifications for pcre.spec: [ 93s] 12c12 [ 93s] < Release: 0 [ 93s] --- [ 93s] > Release: 3.9 [ 93s] 185a186 [ 93s] > %changelog [ 93s] ----------------------------------------------------------------- [ 93s] ----- building pcre.spec (user abuild) [ 93s] ----------------------------------------------------------------- [ 93s] ----------------------------------------------------------------- [ 94s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base:Tool/standard/687055a6077528bb31f848f74208eb71-pcre' -ba /home/abuild/rpmbuild/SOURCES/pcre.spec [ 94s] Building target platforms: aarch64-tizen-linux [ 94s] Building for target aarch64-tizen-linux [ 94s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.xEPsWi [ 94s] + umask 022 [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + cd /home/abuild/rpmbuild/BUILD [ 94s] + rm -rf pcre-8.43 [ 94s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.43.tar.bz2 [ 94s] + /bin/tar -xf - [ 95s] + STATUS=0 [ 95s] + '[' 0 -ne 0 ']' [ 95s] + cd pcre-8.43 [ 95s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 95s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 95s] + exit 0 [ 95s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.mhME7k [ 95s] + umask 022 [ 95s] + cd /home/abuild/rpmbuild/BUILD [ 95s] + cd pcre-8.43 [ 95s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 95s] + ref=/usr/lib/rpm [ 95s] + for s in guess sub [ 95s] ++ find -maxdepth 8 -name config.guess [ 95s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 95s] + grep -q config-patches@ ./config.guess [ 95s] + grep -q aarch64 ./config.guess [ 95s] + grep -q ppc64le ./config.guess [ 95s] + for s in guess sub [ 95s] ++ find -maxdepth 8 -name config.sub [ 95s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 95s] + grep -q config-patches@ ./config.sub [ 95s] + grep -q aarch64 ./config.sub [ 95s] + grep -q ppc64le ./config.sub [ 95s] + LANG=C [ 95s] + export LANG [ 95s] + unset DISPLAY [ 95s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 95s] + export CFLAGS [ 95s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 95s] + export CXXFLAGS [ 95s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 95s] + export FFLAGS [ 95s] + LDFLAGS= [ 95s] + export LDFLAGS [ 95s] + autoreconf -fiv [ 97s] autoreconf: Entering directory `.' [ 97s] autoreconf: configure.ac: not using Gettext [ 98s] autoreconf: running: aclocal --force -I m4 [ 117s] autoreconf: configure.ac: tracing [ 124s] autoreconf: running: libtoolize --copy --force [ 125s] libtoolize: putting auxiliary files in `.'. [ 125s] libtoolize: copying file `./ltmain.sh' [ 126s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 126s] libtoolize: copying file `m4/libtool.m4' [ 126s] libtoolize: copying file `m4/ltoptions.m4' [ 127s] libtoolize: copying file `m4/ltsugar.m4' [ 127s] libtoolize: copying file `m4/ltversion.m4' [ 128s] libtoolize: copying file `m4/lt~obsolete.m4' [ 146s] autoreconf: running: /usr/bin/autoconf --force [ 154s] autoreconf: running: /usr/bin/autoheader --force [ 161s] autoreconf: running: automake --add-missing --copy --force-missing [ 173s] autoreconf: Leaving directory `.' [ 173s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 173s] + export CFLAGS [ 173s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 173s] + export CXXFLAGS [ 173s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 173s] + export FFLAGS [ 173s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 175s] checking for a BSD-compatible install... /bin/install -c [ 175s] checking whether build environment is sane... yes [ 175s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 175s] checking for gawk... gawk [ 176s] checking whether make sets $(MAKE)... yes [ 176s] checking whether make supports nested variables... yes [ 176s] checking whether make supports nested variables... (cached) yes [ 176s] checking for style of include used by make... GNU [ 176s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 177s] checking whether the C compiler works... yes [ 177s] checking for C compiler default output file name... a.out [ 178s] checking for suffix of executables... [ 179s] checking whether we are cross compiling... no [ 179s] checking for suffix of object files... o [ 180s] checking whether we are using the GNU C compiler... yes [ 180s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 181s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... none needed [ 182s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 183s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 183s] checking for aarch64-tizen-linux-gnu-ar... no [ 183s] checking for aarch64-tizen-linux-gnu-lib... no [ 183s] checking for aarch64-tizen-linux-gnu-link... no [ 183s] checking for ar... ar [ 183s] checking the archiver (ar) interface... ar [ 183s] checking for aarch64-tizen-linux-gnu-gcc... (cached) aarch64-tizen-linux-gnu-gcc [ 183s] checking whether we are using the GNU C compiler... (cached) yes [ 183s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... (cached) yes [ 183s] checking for aarch64-tizen-linux-gnu-gcc option to accept ISO C89... (cached) none needed [ 183s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... (cached) yes [ 183s] checking dependency style of aarch64-tizen-linux-gnu-gcc... (cached) gcc3 [ 183s] checking for aarch64-tizen-linux-gnu-g++... aarch64-tizen-linux-gnu-g++ [ 184s] checking whether we are using the GNU C++ compiler... yes [ 185s] checking whether aarch64-tizen-linux-gnu-g++ accepts -g... yes [ 185s] checking dependency style of aarch64-tizen-linux-gnu-g++... gcc3 [ 186s] checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 187s] checking for grep that handles long lines and -e... /bin/grep [ 187s] checking for egrep... /bin/grep -E [ 189s] checking for ANSI C header files... yes [ 189s] checking for sys/types.h... yes [ 190s] checking for sys/stat.h... yes [ 191s] checking for stdlib.h... yes [ 191s] checking for string.h... yes [ 192s] checking for memory.h... yes [ 192s] checking for strings.h... yes [ 193s] checking for inttypes.h... yes [ 193s] checking for stdint.h... yes [ 194s] checking for unistd.h... yes [ 195s] checking for int64_t... yes [ 196s] checking build system type... aarch64-tizen-linux-gnu [ 196s] checking host system type... aarch64-tizen-linux-gnu [ 196s] checking how to print strings... printf [ 196s] checking for a sed that does not truncate output... /bin/sed [ 196s] checking for fgrep... /bin/grep -F [ 196s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 197s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 197s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 197s] checking the name lister (/bin/nm -B) interface... BSD nm [ 197s] checking whether ln -s works... yes [ 197s] checking the maximum length of command line arguments... 1572864 [ 197s] checking whether the shell understands some XSI constructs... yes [ 197s] checking whether the shell understands "+="... yes [ 197s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 197s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 197s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 197s] checking for aarch64-tizen-linux-gnu-objdump... objdump [ 197s] checking how to recognize dependent libraries... pass_all [ 197s] checking for aarch64-tizen-linux-gnu-dlltool... dlltool [ 197s] checking how to associate runtime and link libraries... printf %s\n [ 197s] checking for aarch64-tizen-linux-gnu-ar... ar [ 198s] checking for archiver @FILE support... @ [ 198s] checking for aarch64-tizen-linux-gnu-strip... no [ 198s] checking for strip... strip [ 198s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 198s] checking for ranlib... ranlib [ 199s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 199s] checking for sysroot... no [ 199s] checking for aarch64-tizen-linux-gnu-mt... no [ 199s] checking for mt... no [ 199s] checking if : is a manifest tool... no [ 200s] checking for dlfcn.h... yes [ 200s] checking for objdir... .libs [ 201s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 201s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 202s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 202s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 203s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 203s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 203s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 203s] checking whether -lc should be explicitly linked in... no [ 204s] checking dynamic linker characteristics... GNU/Linux ld.so [ 204s] checking how to hardcode library paths into programs... immediate [ 204s] checking whether stripping libraries is possible... yes [ 204s] checking if libtool supports shared libraries... yes [ 204s] checking whether to build shared libraries... yes [ 204s] checking whether to build static libraries... yes [ 205s] checking how to run the C++ preprocessor... aarch64-tizen-linux-gnu-g++ -E [ 207s] checking for ld used by aarch64-tizen-linux-gnu-g++... /usr/aarch64-tizen-linux-gnu/bin/ld [ 207s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 207s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 208s] checking for aarch64-tizen-linux-gnu-g++ option to produce PIC... -fPIC -DPIC [ 208s] checking if aarch64-tizen-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes [ 209s] checking if aarch64-tizen-linux-gnu-g++ static flag -static works... no [ 209s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... yes [ 209s] checking if aarch64-tizen-linux-gnu-g++ supports -c -o file.o... (cached) yes [ 209s] checking whether the aarch64-tizen-linux-gnu-g++ linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 209s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 209s] checking how to hardcode library paths into programs... immediate [ 209s] checking whether ln -s works... yes [ 210s] checking whether the -Werror option is usable... yes [ 211s] checking for simple visibility declarations... yes [ 211s] checking for ANSI C header files... (cached) yes [ 211s] checking limits.h usability... yes [ 211s] checking limits.h presence... yes [ 211s] checking for limits.h... yes [ 211s] checking for sys/types.h... (cached) yes [ 211s] checking for sys/stat.h... (cached) yes [ 212s] checking dirent.h usability... yes [ 212s] checking dirent.h presence... yes [ 212s] checking for dirent.h... yes [ 213s] checking windows.h usability... no [ 213s] checking windows.h presence... no [ 213s] checking for windows.h... no [ 214s] checking for alias support in the linker... no [ 215s] checking for alias support in the linker... no [ 217s] checking string usability... yes [ 218s] checking string presence... yes [ 218s] checking for string... yes [ 218s] checking bits/type_traits.h usability... no [ 219s] checking bits/type_traits.h presence... no [ 219s] checking for bits/type_traits.h... no [ 219s] checking type_traits.h usability... no [ 219s] checking type_traits.h presence... no [ 219s] checking for type_traits.h... no [ 220s] checking for strtoq... yes [ 222s] checking for long long... yes [ 224s] checking for unsigned long long... yes [ 225s] checking for an ANSI C-conforming const... yes [ 226s] checking for size_t... yes [ 227s] checking for bcopy... yes [ 228s] checking for memmove... yes [ 229s] checking for strerror... yes [ 229s] checking zlib.h usability... no [ 230s] checking zlib.h presence... no [ 230s] checking for zlib.h... no [ 231s] checking for gzopen in -lz... no [ 231s] checking bzlib.h usability... no [ 231s] checking bzlib.h presence... no [ 231s] checking for bzlib.h... no [ 232s] checking for libbz2... no [ 233s] checking that generated files are newer than configure... done [ 233s] configure: creating ./config.status [ 240s] config.status: creating Makefile [ 240s] config.status: creating libpcre.pc [ 240s] config.status: creating libpcre16.pc [ 241s] config.status: creating libpcre32.pc [ 241s] config.status: creating libpcreposix.pc [ 241s] config.status: creating libpcrecpp.pc [ 241s] config.status: creating pcre-config [ 241s] config.status: creating pcre.h [ 242s] config.status: creating pcre_stringpiece.h [ 242s] config.status: creating pcrecpparg.h [ 242s] config.status: creating config.h [ 242s] config.status: executing depfiles commands [ 244s] config.status: executing libtool commands [ 246s] config.status: executing script-chmod commands [ 246s] config.status: executing delete-old-chartables commands [ 246s] [ 246s] pcre-8.43 configuration summary: [ 246s] [ 246s] Install prefix .................. : /usr [ 246s] C preprocessor .................. : aarch64-tizen-linux-gnu-gcc -E [ 246s] C compiler ...................... : aarch64-tizen-linux-gnu-gcc [ 246s] C++ preprocessor ................ : aarch64-tizen-linux-gnu-g++ -E [ 246s] C++ compiler .................... : aarch64-tizen-linux-gnu-g++ [ 246s] Linker .......................... : /usr/aarch64-tizen-linux-gnu/bin/ld [ 246s] C preprocessor flags ............ : [ 246s] C compiler flags ................ : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fvisibility=hidden [ 246s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fvisibility=hidden -fvisibility-inlines-hidden [ 246s] Linker flags .................... : [ 246s] Extra libraries ................. : [ 246s] [ 246s] Build 8 bit pcre library ........ : yes [ 246s] Build 16 bit pcre library ....... : no [ 246s] Build 32 bit pcre library ....... : no [ 246s] Build C++ library ............... : yes [ 246s] Enable JIT compiling support .... : no [ 246s] Enable UTF-8/16/32 support ...... : yes [ 246s] Unicode properties .............. : yes [ 246s] Newline char/sequence ........... : lf [ 246s] \R matches only ANYCRLF ......... : no [ 246s] EBCDIC coding ................... : no [ 246s] EBCDIC code for NL .............. : n/a [ 246s] Rebuild char tables ............. : no [ 246s] Use stack recursion ............. : yes [ 246s] POSIX mem threshold ............. : 10 [ 246s] Internal link size .............. : 2 [ 246s] Nested parentheses limit ........ : 250 [ 246s] Match limit ..................... : 10000000 [ 246s] Match limit recursion ........... : MATCH_LIMIT [ 246s] Build shared libs ............... : yes [ 246s] Build static libs ............... : yes [ 246s] Use JIT in pcregrep ............. : no [ 246s] Buffer size for pcregrep ........ : 20480 [ 246s] Link pcregrep with libz ......... : no [ 246s] Link pcregrep with libbz2 ....... : no [ 246s] Link pcretest with libedit ...... : no [ 246s] Link pcretest with libreadline .. : no [ 246s] Valgrind support ................ : no [ 246s] Code coverage ................... : no [ 246s] [ 247s] + make -j8 [ 247s] rm -f pcre_chartables.c [ 247s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 247s] make all-am [ 247s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 247s] CC libpcre_la-pcre_byte_order.lo [ 247s] CC libpcre_la-pcre_compile.lo [ 247s] CC libpcre_la-pcre_config.lo [ 247s] CC libpcre_la-pcre_dfa_exec.lo [ 247s] CC libpcre_la-pcre_exec.lo [ 247s] CC libpcre_la-pcre_globals.lo [ 247s] CC libpcre_la-pcre_fullinfo.lo [ 247s] CC libpcre_la-pcre_get.lo [ 248s] CC libpcre_la-pcre_jit_compile.lo [ 250s] CC libpcre_la-pcre_maketables.lo [ 250s] CC libpcre_la-pcre_newline.lo [ 250s] CC libpcre_la-pcre_ord2utf8.lo [ 251s] CC libpcre_la-pcre_refcount.lo [ 252s] CC libpcre_la-pcre_string_utils.lo [ 253s] CC libpcre_la-pcre_study.lo [ 254s] CC libpcre_la-pcre_tables.lo [ 254s] CC libpcre_la-pcre_ucd.lo [ 254s] CC libpcre_la-pcre_valid_utf8.lo [ 254s] CC libpcre_la-pcre_version.lo [ 255s] CC libpcre_la-pcre_xclass.lo [ 256s] CC libpcre_la-pcre_chartables.lo [ 257s] CC libpcreposix_la-pcreposix.lo [ 257s] CXX libpcrecpp_la-pcrecpp.lo [ 257s] CXX libpcrecpp_la-pcre_scanner.lo [ 260s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 261s] CC pcretest-pcretest.o [ 262s] CC pcretest-pcre_printint.o [ 266s] CC pcregrep-pcregrep.o [ 270s] CXX pcrecpp_unittest-pcrecpp_unittest.o [ 271s] CXX pcre_scanner_unittest-pcre_scanner_unittest.o [ 275s] CXX pcre_stringpiece_unittest-pcre_stringpiece_unittest.o [ 344s] CCLD libpcre.la [ 345s] CCLD libpcreposix.la [ 345s] CXXLD libpcrecpp.la [ 347s] CCLD pcretest [ 347s] CCLD pcregrep [ 347s] CXXLD pcrecpp_unittest [ 347s] CXXLD pcre_stringpiece_unittest [ 347s] CXXLD pcre_scanner_unittest [ 349s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 349s] + exit 0 [ 349s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.NrOxQm [ 349s] + umask 022 [ 349s] + cd /home/abuild/rpmbuild/BUILD [ 349s] + cd pcre-8.43 [ 349s] + LANG=C [ 349s] + export LANG [ 349s] + unset DISPLAY [ 349s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 [ 349s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 [ 349s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 install [ 349s] /bin/make install-am [ 350s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 350s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 350s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64' [ 350s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64' [ 350s] libtool: install: /bin/install -c .libs/libpcre.so.1.2.11 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcre.so.1.2.11 [ 350s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64 && { ln -s -f libpcre.so.1.2.11 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.2.11 libpcre.so.1; }; }) [ 350s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64 && { ln -s -f libpcre.so.1.2.11 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.2.11 libpcre.so; }; }) [ 350s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcre.la [ 350s] libtool: install: warning: relinking `libpcreposix.la' [ 350s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -fvisibility=hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -version-info 0:6:0 -o libpcreposix.la -rpath /usr/lib64 libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64) [ 351s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.6T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcreposix.so.0.0.6 [ 351s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64 && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.6 libpcreposix.so.0; }; }) [ 352s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64 && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.6 libpcreposix.so; }; }) [ 352s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcreposix.la [ 352s] libtool: install: warning: relinking `libpcrecpp.la' [ 352s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CXX --mode=relink aarch64-tizen-linux-gnu-g++ -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -version-info 0:1:0 -o libpcrecpp.la -rpath /usr/lib64 libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64) [ 353s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.1T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcrecpp.so.0.0.1 [ 353s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64 && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so.0; }; }) [ 353s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64 && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so; }; }) [ 353s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcrecpp.la [ 353s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcre.a [ 353s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcre.a [ 353s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcre.a [ 353s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcreposix.a [ 353s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcreposix.a [ 353s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcreposix.a [ 353s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcrecpp.a [ 353s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcrecpp.a [ 353s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcrecpp.a [ 353s] libtool: install: warning: remember to run `libtool --finish /usr/lib64' [ 353s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin' [ 354s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin' [ 354s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib64' [ 354s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib64' [ 354s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib64' [ 354s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin/pcretest [ 354s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib64' [ 354s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib64' [ 354s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib64' [ 354s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin/pcregrep [ 354s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin' [ 354s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin' [ 354s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre' [ 354s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre' [ 354s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre/html' [ 355s] /bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre-config.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre32.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_exec.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_utf32_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre/html' [ 355s] /bin/install -c -m 644 doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre/html' [ 355s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre/html' [ 355s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre/html' [ 355s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/include' [ 355s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/include' [ 355s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man1' [ 355s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man1' [ 355s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3' [ 355s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre32.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_exec.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_utf32_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcredemo.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3' [ 355s] /bin/install -c -m 644 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3' [ 355s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/include' [ 355s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/include' [ 355s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/pkgconfig' [ 355s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/pkgconfig' [ 355s] /bin/make install-data-hook [ 356s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 356s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 356s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_compile.3 [ 356s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_compile2.3 [ 356s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_config.3 [ 356s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_copy_named_substring.3 [ 356s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_copy_substring.3 [ 356s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_dfa_exec.3 [ 356s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_exec.3 [ 356s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_free_study.3 [ 356s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_free_substring.3 [ 356s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_free_substring_list.3 [ 356s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_fullinfo.3 [ 356s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_get_named_substring.3 [ 356s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_get_stringnumber.3 [ 356s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 356s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_get_substring.3 [ 356s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_get_substring_list.3 [ 356s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_jit_exec.3 [ 356s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 356s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_jit_stack_free.3 [ 356s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_maketables.3 [ 356s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 356s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_refcount.3 [ 356s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_study.3 [ 356s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 356s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre16_version.3 [ 356s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_assign_jit_stack.3 [ 356s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_compile.3 [ 356s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_compile2.3 [ 356s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_config.3 [ 356s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_copy_named_substring.3 [ 356s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_copy_substring.3 [ 356s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_dfa_exec.3 [ 356s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_exec.3 [ 356s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_free_study.3 [ 356s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_free_substring.3 [ 356s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_free_substring_list.3 [ 356s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_fullinfo.3 [ 356s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_get_named_substring.3 [ 356s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_get_stringnumber.3 [ 356s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_get_stringtable_entries.3 [ 356s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_get_substring.3 [ 356s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_get_substring_list.3 [ 356s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_jit_exec.3 [ 356s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_jit_stack_alloc.3 [ 356s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_jit_stack_free.3 [ 356s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_maketables.3 [ 356s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_pattern_to_host_byte_order.3 [ 356s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_refcount.3 [ 356s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_study.3 [ 356s] ln -sf pcre_utf32_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_utf32_to_host_byte_order.3 [ 356s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/man/man3/pcre32_version.3 [ 356s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 356s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 356s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 356s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/info/dir [ 356s] + xargs rm -f -- [ 356s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 -regex '.*\.la$' [ 356s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64//usr/share/doc/packages [ 356s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64//usr/share/doc/packages/pcre-doc [ 356s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/*.la' [ 356s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pcre-8.43 [ 357s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin/pcregrep [ 357s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/bin/pcretest [ 358s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcre.so.1.2.11 [ 358s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcrecpp.so.0.0.1 [ 358s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/lib64/libpcreposix.so.0.0.6 [ 359s] 3855 blocks [ 359s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debuginfo.manifest [ 359s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debugsource.manifest [ 359s] + /usr/lib/rpm/check-buildroot [ 359s] + /usr/lib/rpm//brp-compress [ 365s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 373s] + /usr/lib/rpm/brp-python-hardlink [ 373s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 [ 374s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.jaas4k [ 374s] + umask 022 [ 374s] + cd /home/abuild/rpmbuild/BUILD [ 374s] + cd pcre-8.43 [ 374s] + export LANG=POSIX [ 374s] + LANG=POSIX [ 374s] + make check [ 374s] make check-am [ 374s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 374s] make [ 374s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 374s] make all-am [ 375s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 375s] make[3]: Nothing to be done for 'all-am'. [ 375s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 375s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 375s] make check-TESTS [ 375s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 376s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 376s] PASS: pcrecpp_unittest [ 376s] PASS: pcre_scanner_unittest [ 377s] PASS: pcre_stringpiece_unittest [ 387s] PASS: RunTest [ 414s] PASS: RunGrepTest [ 415s] ============================================================================ [ 415s] Testsuite summary for PCRE 8.43 [ 415s] ============================================================================ [ 415s] # TOTAL: 5 [ 415s] # PASS: 5 [ 415s] # SKIP: 0 [ 415s] # XFAIL: 0 [ 415s] # FAIL: 0 [ 415s] # XPASS: 0 [ 415s] # ERROR: 0 [ 415s] ============================================================================ [ 415s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 415s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 415s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 415s] + exit 0 [ 415s] Processing files: pcre-debugsource-8.43-3.9.aarch64 [ 415s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 415s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 415s] [ 415s] Provides: pcre-debugsource = 8.43-3.9 pcre-debugsource(aarch-64) = 8.43-3.9 [ 415s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 415s] Processing files: pcre-devel-8.43-3.9.aarch64 [ 415s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 415s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 415s] [ 418s] Provides: pcre-devel = 8.43-3.9 pcre-devel(aarch-64) = 8.43-3.9 pkgconfig(libpcre) = 8.43 pkgconfig(libpcrecpp) = 8.43 pkgconfig(libpcreposix) = 8.43 [ 418s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 418s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1()(64bit) libpcrecpp.so.0()(64bit) libpcreposix.so.0()(64bit) pkgconfig(libpcre) [ 418s] Processing files: pcre-devel-static-8.43-3.9.aarch64 [ 418s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 418s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 418s] [ 418s] Provides: pcre-devel-static = 8.43-3.9 pcre-devel-static(aarch-64) = 8.43-3.9 [ 418s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 418s] Processing files: libpcre-8.43-3.9.aarch64 [ 418s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 418s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 418s] [ 418s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.qHm1Fl [ 418s] + umask 022 [ 418s] + cd /home/abuild/rpmbuild/BUILD [ 418s] + cd pcre-8.43 [ 418s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcre [ 418s] + export LICENSEDIR [ 418s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcre [ 418s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcre [ 418s] + exit 0 [ 418s] Provides: libpcre = 8.43-3.9 libpcre(aarch-64) = 8.43-3.9 libpcre.so.1()(64bit) pcre = 8.43 [ 418s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 418s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 418s] Requires(post): /sbin/ldconfig [ 418s] Requires(postun): /sbin/ldconfig [ 418s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) [ 418s] Obsoletes: pcre < 8.43 [ 418s] Processing files: libpcreposix-8.43-3.9.aarch64 [ 418s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 418s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 418s] [ 418s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.WmFhZk [ 418s] + umask 022 [ 418s] + cd /home/abuild/rpmbuild/BUILD [ 418s] + cd pcre-8.43 [ 418s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcreposix [ 418s] + export LICENSEDIR [ 418s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcreposix [ 418s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcreposix [ 418s] + exit 0 [ 418s] Provides: libpcreposix = 8.43-3.9 libpcreposix(aarch-64) = 8.43-3.9 libpcreposix.so.0()(64bit) [ 418s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 418s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 418s] Requires(post): /sbin/ldconfig [ 418s] Requires(postun): /sbin/ldconfig [ 418s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libpcre.so.1()(64bit) [ 418s] Processing files: libpcrecpp-8.43-3.9.aarch64 [ 418s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 418s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 418s] [ 418s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Zqfwzj [ 418s] + umask 022 [ 418s] + cd /home/abuild/rpmbuild/BUILD [ 418s] + cd pcre-8.43 [ 418s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcrecpp [ 418s] + export LICENSEDIR [ 418s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcrecpp [ 418s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/libpcrecpp [ 418s] + exit 0 [ 419s] Provides: libpcrecpp = 8.43-3.9 libpcrecpp(aarch-64) = 8.43-3.9 libpcrecpp.so.0()(64bit) [ 419s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 419s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 419s] Requires(post): /sbin/ldconfig [ 419s] Requires(postun): /sbin/ldconfig [ 419s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libpcre.so.1()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.20)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) [ 419s] Processing files: pcre-doc-8.43-3.9.noarch [ 419s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 419s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 419s] [ 419s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.t8XuQk [ 419s] + umask 022 [ 419s] + cd /home/abuild/rpmbuild/BUILD [ 419s] + cd pcre-8.43 [ 419s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + export DOCDIR [ 419s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/doc/packages/pcre-doc [ 419s] + exit 0 [ 420s] Provides: pcre-doc = 8.43-3.9 [ 420s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 420s] Processing files: pcre-tools-8.43-3.9.aarch64 [ 420s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 420s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 420s] [ 420s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.lpB0Am [ 420s] + umask 022 [ 420s] + cd /home/abuild/rpmbuild/BUILD [ 420s] + cd pcre-8.43 [ 420s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/pcre-tools [ 420s] + export LICENSEDIR [ 420s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/pcre-tools [ 420s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64/usr/share/licenses/pcre-tools [ 420s] + exit 0 [ 421s] Provides: pcre-tools = 8.43-3.9 pcre-tools(aarch-64) = 8.43-3.9 [ 421s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 421s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libpcre.so.1()(64bit) libpcreposix.so.0()(64bit) [ 421s] Processing files: libpcre-debuginfo-8.43-3.9.aarch64 [ 421s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 421s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 421s] [ 421s] Provides: libpcre-debuginfo = 8.43-3.9 libpcre-debuginfo(aarch-64) = 8.43-3.9 [ 421s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 421s] Processing files: libpcreposix-debuginfo-8.43-3.9.aarch64 [ 421s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 421s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 421s] [ 421s] Provides: libpcreposix-debuginfo = 8.43-3.9 libpcreposix-debuginfo(aarch-64) = 8.43-3.9 [ 421s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 421s] Processing files: libpcrecpp-debuginfo-8.43-3.9.aarch64 [ 421s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 421s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 421s] [ 421s] Provides: libpcrecpp-debuginfo = 8.43-3.9 libpcrecpp-debuginfo(aarch-64) = 8.43-3.9 [ 421s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 421s] Processing files: pcre-tools-debuginfo-8.43-3.9.aarch64 [ 421s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 421s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 421s] [ 421s] warning: File listed twice: /usr/lib/debug/.build-id [ 421s] Provides: pcre-tools-debuginfo = 8.43-3.9 pcre-tools-debuginfo(aarch-64) = 8.43-3.9 [ 421s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 421s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 [ 421s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.43-3.9.src.rpm [ 424s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/pcre-debugsource-8.43-3.9.aarch64.rpm [ 424s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/pcre-devel-8.43-3.9.aarch64.rpm [ 425s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/pcre-devel-static-8.43-3.9.aarch64.rpm [ 426s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpcre-8.43-3.9.aarch64.rpm [ 426s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpcreposix-8.43-3.9.aarch64.rpm [ 426s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpcrecpp-8.43-3.9.aarch64.rpm [ 429s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-3.9.noarch.rpm [ 429s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/pcre-tools-8.43-3.9.aarch64.rpm [ 431s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpcre-debuginfo-8.43-3.9.aarch64.rpm [ 431s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpcreposix-debuginfo-8.43-3.9.aarch64.rpm [ 432s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpcrecpp-debuginfo-8.43-3.9.aarch64.rpm [ 433s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/pcre-tools-debuginfo-8.43-3.9.aarch64.rpm [ 433s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.WXoxZj [ 433s] + umask 022 [ 433s] + cd /home/abuild/rpmbuild/BUILD [ 433s] + cd pcre-8.43 [ 433s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.aarch64 [ 433s] + exit 0 [ 433s] ... checking for files with abuild user/group [ 433s] ... creating baselibs [ 434s] no targets for arch aarch64, nothing to do [ 434s] ... comparing built packages with the former built [ 434s] /usr/lib/build/pkg-diff.sh [ 434s] compare /.build.oldpackages/pcre-8.43-3.8.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.43-3.9.src.rpm [ 435s] This is not a prerelease project. Compare the project name. [ 436s] comparing rpmtags [ 436s] comparing RELEASE [ 436s] comparing PROVIDES [ 437s] comparing scripts [ 437s] comparing filelist [ 438s] comparing file checksum [ 438s] RPM meta information is identical [ 438s] compare /.build.oldpackages/libpcre-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpcre-8.43-3.9.aarch64.rpm [ 439s] Comparing libpcre-8.43-3.8.aarch64.rpm to libpcre-8.43-3.9.aarch64.rpm [ 439s] This is not a prerelease project. Compare the project name. [ 439s] comparing rpmtags [ 440s] comparing RELEASE [ 440s] comparing PROVIDES [ 441s] comparing scripts [ 441s] comparing filelist [ 442s] comparing file checksum [ 442s] creating rename script [ 442s] RPM file checksum differs. [ 442s] Extracting packages [ 451s] /usr/lib64/libpcre.so.1.2.11: only difference was in build-id or gnu_debuglink, GOOD. [ 451s] Package content is identical [ 451s] compare /.build.oldpackages/libpcre-debuginfo-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpcre-debuginfo-8.43-3.9.aarch64.rpm [ 452s] skipping -debuginfo package [ 452s] compare /.build.oldpackages/libpcrecpp-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpcrecpp-8.43-3.9.aarch64.rpm [ 452s] Comparing libpcrecpp-8.43-3.8.aarch64.rpm to libpcrecpp-8.43-3.9.aarch64.rpm [ 453s] This is not a prerelease project. Compare the project name. [ 453s] comparing rpmtags [ 454s] comparing RELEASE [ 454s] comparing PROVIDES [ 454s] comparing scripts [ 455s] comparing filelist [ 455s] comparing file checksum [ 455s] creating rename script [ 456s] RPM file checksum differs. [ 456s] Extracting packages [ 459s] /usr/lib64/libpcrecpp.so.0.0.1: only difference was in build-id or gnu_debuglink, GOOD. [ 459s] Package content is identical [ 459s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpcrecpp-debuginfo-8.43-3.9.aarch64.rpm [ 460s] skipping -debuginfo package [ 460s] compare /.build.oldpackages/libpcreposix-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpcreposix-8.43-3.9.aarch64.rpm [ 460s] Comparing libpcreposix-8.43-3.8.aarch64.rpm to libpcreposix-8.43-3.9.aarch64.rpm [ 461s] This is not a prerelease project. Compare the project name. [ 461s] comparing rpmtags [ 462s] comparing RELEASE [ 462s] comparing PROVIDES [ 462s] comparing scripts [ 463s] comparing filelist [ 463s] comparing file checksum [ 463s] creating rename script [ 464s] RPM file checksum differs. [ 464s] Extracting packages [ 466s] /usr/lib64/libpcreposix.so.0.0.6: only difference was in build-id or gnu_debuglink, GOOD. [ 466s] Package content is identical [ 466s] compare /.build.oldpackages/libpcreposix-debuginfo-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpcreposix-debuginfo-8.43-3.9.aarch64.rpm [ 467s] skipping -debuginfo package [ 467s] compare /.build.oldpackages/pcre-debugsource-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/pcre-debugsource-8.43-3.9.aarch64.rpm [ 467s] Comparing pcre-debugsource-8.43-3.8.aarch64.rpm to pcre-debugsource-8.43-3.9.aarch64.rpm [ 468s] This is not a prerelease project. Compare the project name. [ 468s] comparing rpmtags [ 469s] comparing RELEASE [ 469s] comparing PROVIDES [ 470s] comparing scripts [ 470s] comparing filelist [ 470s] comparing file checksum [ 470s] creating rename script [ 471s] RPM meta information is identical [ 471s] compare /.build.oldpackages/pcre-devel-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/pcre-devel-8.43-3.9.aarch64.rpm [ 471s] Comparing pcre-devel-8.43-3.8.aarch64.rpm to pcre-devel-8.43-3.9.aarch64.rpm [ 472s] This is not a prerelease project. Compare the project name. [ 472s] comparing rpmtags [ 473s] comparing RELEASE [ 473s] comparing PROVIDES [ 474s] comparing scripts [ 474s] comparing filelist [ 474s] comparing file checksum [ 474s] creating rename script [ 475s] RPM meta information is identical [ 475s] compare /.build.oldpackages/pcre-devel-static-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/pcre-devel-static-8.43-3.9.aarch64.rpm [ 475s] Comparing pcre-devel-static-8.43-3.8.aarch64.rpm to pcre-devel-static-8.43-3.9.aarch64.rpm [ 476s] This is not a prerelease project. Compare the project name. [ 476s] comparing rpmtags [ 477s] comparing RELEASE [ 477s] comparing PROVIDES [ 478s] comparing scripts [ 478s] comparing filelist [ 478s] comparing file checksum [ 478s] creating rename script [ 479s] RPM file checksum differs. [ 479s] Extracting packages [ 480s] /usr/lib64/libpcre_la-pcre_byte_order.o differs in ELF section .comment [ 480s] --- /tmp/tmp.yhbIV56889/tmp.NbkDn57120 2020-09-18 05:59:20.000000000 +0000 [ 480s] +++ /tmp/tmp.yhbIV56889/tmp.FDzsO57123 2020-09-18 05:59:20.000000000 +0000 [ 480s] @@ -4,4 +4,4 @@ [ 480s] Contents of section .comment: [ 480s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 480s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 480s] - 0020 342e3229 20392e32 2e3000 4.2) 9.2.0. [ 480s] + 0020 352e3229 20392e32 2e3000 5.2) 9.2.0. [ 480s] compare /.build.oldpackages/pcre-doc-8.43-3.8.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-3.9.noarch.rpm [ 481s] Comparing pcre-doc-8.43-3.8.noarch.rpm to pcre-doc-8.43-3.9.noarch.rpm [ 481s] This is not a prerelease project. Compare the project name. [ 482s] comparing rpmtags [ 482s] comparing RELEASE [ 483s] comparing PROVIDES [ 483s] comparing scripts [ 483s] comparing filelist [ 484s] comparing file checksum [ 484s] creating rename script [ 484s] RPM meta information is identical [ 484s] compare /.build.oldpackages/pcre-tools-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/pcre-tools-8.43-3.9.aarch64.rpm [ 485s] Comparing pcre-tools-8.43-3.8.aarch64.rpm to pcre-tools-8.43-3.9.aarch64.rpm [ 485s] This is not a prerelease project. Compare the project name. [ 485s] comparing rpmtags [ 486s] comparing RELEASE [ 487s] comparing PROVIDES [ 487s] comparing scripts [ 487s] comparing filelist [ 488s] comparing file checksum [ 488s] creating rename script [ 488s] RPM file checksum differs. [ 488s] Extracting packages [ 492s] /usr/bin/pcregrep: only difference was in build-id or gnu_debuglink, GOOD. [ 495s] /usr/bin/pcretest: only difference was in build-id or gnu_debuglink, GOOD. [ 495s] Package content is identical [ 495s] compare /.build.oldpackages/pcre-tools-debuginfo-8.43-3.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/pcre-tools-debuginfo-8.43-3.9.aarch64.rpm [ 496s] skipping -debuginfo package [ 496s] [ 496s] obspw10 finished "build pcre.spec" at Fri Sep 18 05:59:36 UTC 2020. [ 496s] Retried build at Mon Sep 28 02:24:19 2020 returned same result, skipped