[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_3 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw19 started "build _service:gbs:pcre.spec" at Fri Sep 18 06:10:12 UTC 2020. [ 0s] [ 0s] Building pcre for project 'Tizen:Base:Tool' repository 'standard' arch 'armv7l' srcmd5 '687055a6077528bb31f848f74208eb71' [ 0s] [ 0s] processing recipe /var/cache/build/root_3/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_3/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_3/.build.rpmlist /var/cache/build/root_3/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/3/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/36] preinstalling libmagic-data... [ 1s] [2/36] preinstalling libncurses... [ 1s] [3/36] preinstalling setup... [ 1s] [4/36] preinstalling filesystem... [ 1s] [5/36] preinstalling glibc... [ 2s] [6/36] preinstalling libgcc... [ 2s] [7/36] preinstalling bash... [ 2s] [8/36] preinstalling diffutils... [ 2s] [9/36] preinstalling grep... [ 2s] [10/36] preinstalling libattr... [ 2s] [11/36] preinstalling libbz2... [ 2s] [12/36] preinstalling libcap... [ 2s] [13/36] preinstalling libfreebl3... [ 2s] [14/36] preinstalling liblua... [ 2s] [15/36] preinstalling liblzma... [ 2s] [16/36] preinstalling libpopt... [ 2s] [17/36] preinstalling libreadline... [ 2s] [18/36] preinstalling libsmack... [ 2s] [19/36] preinstalling libsqlite... [ 2s] [20/36] preinstalling nspr... [ 2s] [21/36] preinstalling sed... [ 2s] [22/36] preinstalling zlib... [ 2s] [23/36] preinstalling qemu-linux-user-x86_64-cross... [ 3s] [24/36] preinstalling coreutils... [ 3s] [25/36] preinstalling libacl... [ 3s] [26/36] preinstalling libelf... [ 3s] [27/36] preinstalling smack... [ 3s] [28/36] preinstalling bzip2... [ 3s] [29/36] preinstalling libmagic... [ 3s] [30/36] preinstalling libxml2... [ 3s] [31/36] preinstalling util-linux... [ 3s] [32/36] preinstalling tar... [ 3s] [33/36] preinstalling util-linux-su... [ 3s] [34/36] preinstalling nss... [ 3s] [35/36] preinstalling libsoftokn3... [ 3s] [36/36] preinstalling rpm... [ 3s] [ 3s] running qemu-linux-user-x86_64-cross postinstall script [ 3s] mount: error while loading shared libraries: libmount.so.1: cannot open shared object file: No such file or directory [ 3s] cat: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 3s] cat: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 3s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 4s] cat: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 4s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 4s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 4s] running setup postinstall script [ 4s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 4s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 4s] initializing rpm db... [ 4s] reordering...cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 5s] [1/92] installing libmagic-data-5.37-3.47 [ 5s] [2/92] installing setup-0.9-4.1 [ 5s] [3/92] installing filesystem-3.1-3.1 [ 6s] [4/92] installing glibc-2.30-5.2 [ 7s] [5/92] installing libatomic-9.2.0-5.2 [ 8s] [6/92] installing libgcc-9.2.0-5.2 [ 10s] [7/92] installing bash-3.2.57-4.1 [ 10s] [8/92] installing cpio-2.11-3.1 [ 10s] [9/92] installing diffutils-3.3-3.1 [ 11s] [10/92] installing findutils-4.3.8-3.51 [ 11s] [11/92] installing gdbm-1.8.3-3.60 [ 12s] [12/92] installing hostname-3.23-3.1 [ 12s] [13/92] installing libattr-2.4.47-3.58 [ 13s] [14/92] installing libblkid-2.34-4.3 [ 14s] [15/92] installing libbz2-1.0.8-4.6 [ 15s] [16/92] installing libcap-2.24-3.58 [ 16s] [17/92] installing libext2fs-1.43.4-3.1 [ 18s] [18/92] installing libfreebl3-3.34.1-3.36 [ 19s] [19/92] installing libgfortran-9.2.0-5.2 [ 20s] [20/92] installing libgomp-9.2.0-5.2 [ 21s] [21/92] installing libitm-9.2.0-5.2 [ 22s] [22/92] installing libltdl-2.4.2-3.30 [ 23s] [23/92] installing liblua-5.1.5-3.64 [ 24s] [24/92] installing liblzma-5.2.4-3.47 [ 25s] [25/92] installing libpcre-8.43-3.8 [ 26s] [26/92] installing libpopt-1.16-3.58 [ 27s] [27/92] installing libsmack-1.3.1-3.56 [ 29s] [28/92] installing libsmartcols-2.34-4.3 [ 30s] [29/92] installing libsqlite-3.31.1-3.46 [ 31s] [30/92] installing libstdc++-9.2.0-5.2 [ 32s] [31/92] installing libuuid-2.34-4.3 [ 33s] [32/92] installing m4-1.4.17-2.1 [ 33s] [33/92] installing net-tools-2.0_20121208git-3.1 [ 34s] [34/92] installing nspr-4.12-3.56 [ 35s] [35/92] installing patch-2.7-3.51 [ 35s] [36/92] installing pkg-config-0.28-3.49 [ 35s] [37/92] installing sed-4.1c-3.1 [ 36s] [38/92] installing update-alternatives-1.18.15-2.1 [ 36s] [39/92] installing which-2.20-3.1 [ 36s] [40/92] installing zlib-1.2.11-3.51 [ 38s] [41/92] installing build-compare-2015.04.28-3.15 [ 38s] [42/92] installing libstdc++-devel-9.2.0-5.2 [ 41s] [43/92] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 48s] mount: error while loading shared libraries: libmount.so.1: cannot open shared object file: No such file or directory [ 48s] cat: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 48s] /var/tmp/rpm-tmp.L1qpK5: line 8: /proc/sys/fs/binfmt_misc/arm: No such file or directory [ 48s] /var/tmp/rpm-tmp.L1qpK5: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 48s] cat: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 48s] /var/tmp/rpm-tmp.L1qpK5: line 8: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 48s] /var/tmp/rpm-tmp.L1qpK5: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 48s] cat: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 48s] /var/tmp/rpm-tmp.L1qpK5: line 8: /proc/sys/fs/binfmt_misc/aarch64: No such file or directory [ 48s] /var/tmp/rpm-tmp.L1qpK5: line 9: /proc/sys/fs/binfmt_misc/register: No such file or directory [ 48s] warning: %post(qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1.armv7l) scriptlet failed, exit status 1 [ 48s] [44/92] installing terminfo-base-full-6.1_20191207-3.40 [ 49s] [45/92] installing cpp-9.2.0-5.2 [ 52s] [46/92] installing gcc-c++-9.2.0-5.2 [ 54s] [47/92] installing binutils-2.33.1-5.3 [ 56s] [48/92] installing coreutils-6.9-4.5 [ 57s] [49/92] installing gawk-3.1.5-4.1 [ 57s] [50/92] installing grep-2.5.2-3.1 [ 57s] [51/92] installing libacl-2.2.52-3.55 [ 58s] [52/92] installing libcc1-9.2.0-5.2 [ 59s] [53/92] installing libelf-0.178-3.7 [ 60s] [54/92] installing libmount-2.34-4.3 [ 61s] [55/92] installing libubsan-9.2.0-5.2 [ 62s] [56/92] installing make-4.0-2.7 [ 63s] [57/92] installing nss-certs-3.34.1-3.36 [ 64s] [58/92] installing smack-1.3.1-3.56 [ 64s] [59/92] installing bzip2-1.0.8-4.6 [ 64s] [60/92] installing libfdisk-2.34-4.3 [ 65s] [61/92] installing libmagic-5.37-3.47 [ 67s] [62/92] installing libxml2-2.9.10-3.46 [ 68s] [63/92] installing perl-5.30.0-2.25 [ 76s] [64/92] installing xz-5.2.4-3.47 [ 76s] [65/92] installing build-mkbaselibs-20120927-3.1 [ 77s] [66/92] installing linux-glibc-devel-3.10-3.58 [ 78s] [67/92] installing autoconf-2.69-3.30 [ 80s] [68/92] installing file-5.37-3.47 [ 80s] [69/92] installing glibc-locale-2.30-5.2 [ 82s] [70/92] installing tar-1.17-2.1 [ 83s] [71/92] installing gzip-1.3.12-3.57 [ 83s] [72/92] installing libncurses6-6.1_20191207-3.40 [ 84s] [73/92] installing pam-1.1.6-3.1 [ 86s] [74/92] installing tzdata-2019c-2.1 [ 87s] [75/92] installing libdw-0.178-3.7 [ 89s] [76/92] installing gcc-9.2.0-5.2 [ 91s] [77/92] installing libncurses-6.1_20191207-3.40 [ 92s] [78/92] installing glibc-devel-2.30-5.2 [ 92s] [79/92] installing automake-1.15.1-3.35 [ 94s] [80/92] installing less-466-3.1 [ 94s] [81/92] installing libreadline-5.2-2.56 [ 95s] [82/92] installing procps-ng-3.3.15-2.1 [ 97s] [83/92] installing libasm-0.178-3.7 [ 97s] [84/92] installing build-20120927-3.1 [ 97s] [85/92] installing libtool-2.4.2-3.30 [ 98s] [86/92] installing elfutils-0.178-3.7 [ 99s] [87/92] installing util-linux-2.34-4.3 [ 99s] [88/92] installing util-linux-su-2.34-4.3 [ 100s] [89/92] installing nss-3.34.1-3.36 [ 101s] [90/92] installing libsoftokn3-3.34.1-3.36 [ 102s] [91/92] installing rpm-4.11.0.1-2.27 [ 103s] [92/92] installing rpm-build-4.11.0.1-2.27 [ 104s] removing nis flags from /var/cache/build/root_3/etc/nsswitch.conf... [ 104s] now finalizing build dir... [ 105s] Running build time source services... [ 105s] build target is armv7l-tizen-linux [ 105s] ----------------------------------------------------------------- [ 105s] I have the following modifications for pcre.spec: [ 105s] 12c12 [ 105s] < Release: 0 [ 105s] --- [ 105s] > Release: 3.9 [ 105s] 185a186 [ 105s] > %changelog [ 105s] ----------------------------------------------------------------- [ 105s] ----- building pcre.spec (user abuild) [ 105s] ----------------------------------------------------------------- [ 105s] ----------------------------------------------------------------- [ 106s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base:Tool/standard/687055a6077528bb31f848f74208eb71-pcre' -ba /home/abuild/rpmbuild/SOURCES/pcre.spec [ 106s] Building target platforms: armv7l-tizen-linux [ 106s] Building for target armv7l-tizen-linux [ 106s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.LmuDc6 [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + rm -rf pcre-8.43 [ 106s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.43.tar.bz2 [ 106s] + /bin/tar -xf - [ 107s] + STATUS=0 [ 107s] + '[' 0 -ne 0 ']' [ 107s] + cd pcre-8.43 [ 107s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 107s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 107s] + exit 0 [ 107s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.P6a5B6 [ 107s] + umask 022 [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + cd pcre-8.43 [ 107s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 107s] + LANG=C [ 107s] + export LANG [ 107s] + unset DISPLAY [ 107s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 107s] + export CFLAGS [ 107s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 107s] + export CXXFLAGS [ 107s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 107s] + export FFLAGS [ 107s] + LDFLAGS= [ 107s] + export LDFLAGS [ 107s] + autoreconf -fiv [ 110s] autoreconf: Entering directory `.' [ 110s] autoreconf: configure.ac: not using Gettext [ 111s] autoreconf: running: aclocal --force -I m4 [ 131s] autoreconf: configure.ac: tracing [ 139s] autoreconf: running: libtoolize --copy --force [ 141s] libtoolize: putting auxiliary files in `.'. [ 141s] libtoolize: copying file `./ltmain.sh' [ 142s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 142s] libtoolize: copying file `m4/libtool.m4' [ 142s] libtoolize: copying file `m4/ltoptions.m4' [ 143s] libtoolize: copying file `m4/ltsugar.m4' [ 143s] libtoolize: copying file `m4/ltversion.m4' [ 144s] libtoolize: copying file `m4/lt~obsolete.m4' [ 164s] autoreconf: running: /usr/bin/autoconf --force [ 174s] autoreconf: running: /usr/bin/autoheader --force [ 182s] autoreconf: running: automake --add-missing --copy --force-missing [ 197s] autoreconf: Leaving directory `.' [ 197s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 197s] + export CFLAGS [ 197s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 197s] + export CXXFLAGS [ 197s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 197s] + export FFLAGS [ 197s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 200s] checking for a BSD-compatible install... /bin/install -c [ 200s] checking whether build environment is sane... yes [ 200s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 200s] checking for gawk... gawk [ 200s] checking whether make sets $(MAKE)... yes [ 200s] checking whether make supports nested variables... yes [ 201s] checking whether make supports nested variables... (cached) yes [ 201s] checking for style of include used by make... GNU [ 201s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 202s] checking whether the C compiler works... yes [ 202s] checking for C compiler default output file name... a.out [ 203s] checking for suffix of executables... [ 205s] checking whether we are cross compiling... no [ 206s] checking for suffix of object files... o [ 206s] checking whether we are using the GNU C compiler... yes [ 207s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 208s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 209s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 211s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 211s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 211s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 211s] checking for armv7l-tizen-linux-gnueabi-link... no [ 211s] checking for ar... ar [ 211s] checking the archiver (ar) interface... ar [ 211s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 212s] checking whether we are using the GNU C compiler... (cached) yes [ 212s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 212s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 212s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 212s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 212s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 214s] checking whether we are using the GNU C++ compiler... yes [ 214s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 216s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 217s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 218s] checking for grep that handles long lines and -e... /bin/grep [ 218s] checking for egrep... /bin/grep -E [ 221s] checking for ANSI C header files... yes [ 222s] checking for sys/types.h... yes [ 223s] checking for sys/stat.h... yes [ 223s] checking for stdlib.h... yes [ 224s] checking for string.h... yes [ 225s] checking for memory.h... yes [ 226s] checking for strings.h... yes [ 227s] checking for inttypes.h... yes [ 228s] checking for stdint.h... yes [ 229s] checking for unistd.h... yes [ 231s] checking for int64_t... yes [ 232s] checking build system type... armv7l-tizen-linux-gnueabi [ 232s] checking host system type... armv7l-tizen-linux-gnueabi [ 232s] checking how to print strings... printf [ 232s] checking for a sed that does not truncate output... /bin/sed [ 233s] checking for fgrep... /bin/grep -F [ 233s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 233s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 233s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 234s] checking the name lister (/bin/nm -B) interface... BSD nm [ 234s] checking whether ln -s works... yes [ 234s] checking the maximum length of command line arguments... 1572864 [ 234s] checking whether the shell understands some XSI constructs... yes [ 234s] checking whether the shell understands "+="... yes [ 234s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 234s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 234s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 234s] checking for armv7l-tizen-linux-gnueabi-objdump... objdump [ 234s] checking how to recognize dependent libraries... pass_all [ 234s] checking for armv7l-tizen-linux-gnueabi-dlltool... dlltool [ 234s] checking how to associate runtime and link libraries... printf %s\n [ 234s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 235s] checking for archiver @FILE support... @ [ 235s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 235s] checking for strip... strip [ 235s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 235s] checking for ranlib... ranlib [ 238s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 238s] checking for sysroot... no [ 238s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 238s] checking for mt... no [ 238s] checking if : is a manifest tool... no [ 239s] checking for dlfcn.h... yes [ 239s] checking for objdir... .libs [ 241s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 241s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 242s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 243s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 244s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 244s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 244s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 245s] checking whether -lc should be explicitly linked in... no [ 247s] checking dynamic linker characteristics... GNU/Linux ld.so [ 247s] checking how to hardcode library paths into programs... immediate [ 247s] checking whether stripping libraries is possible... yes [ 247s] checking if libtool supports shared libraries... yes [ 247s] checking whether to build shared libraries... yes [ 247s] checking whether to build static libraries... yes [ 248s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 251s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 251s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 251s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 253s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 254s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 254s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 255s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 255s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 255s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 256s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 256s] checking how to hardcode library paths into programs... immediate [ 256s] checking whether ln -s works... yes [ 256s] checking whether the -Werror option is usable... yes [ 257s] checking for simple visibility declarations... yes [ 257s] checking for ANSI C header files... (cached) yes [ 258s] checking limits.h usability... yes [ 258s] checking limits.h presence... yes [ 258s] checking for limits.h... yes [ 258s] checking for sys/types.h... (cached) yes [ 259s] checking for sys/stat.h... (cached) yes [ 260s] checking dirent.h usability... yes [ 260s] checking dirent.h presence... yes [ 260s] checking for dirent.h... yes [ 261s] checking windows.h usability... no [ 261s] checking windows.h presence... no [ 261s] checking for windows.h... no [ 262s] checking for alias support in the linker... no [ 263s] checking for alias support in the linker... no [ 266s] checking string usability... yes [ 267s] checking string presence... yes [ 267s] checking for string... yes [ 268s] checking bits/type_traits.h usability... no [ 268s] checking bits/type_traits.h presence... no [ 268s] checking for bits/type_traits.h... no [ 269s] checking type_traits.h usability... no [ 270s] checking type_traits.h presence... no [ 270s] checking for type_traits.h... no [ 271s] checking for strtoq... yes [ 273s] checking for long long... yes [ 276s] checking for unsigned long long... yes [ 277s] checking for an ANSI C-conforming const... yes [ 279s] checking for size_t... yes [ 280s] checking for bcopy... yes [ 281s] checking for memmove... yes [ 283s] checking for strerror... yes [ 284s] checking zlib.h usability... no [ 284s] checking zlib.h presence... no [ 284s] checking for zlib.h... no [ 285s] checking for gzopen in -lz... no [ 286s] checking bzlib.h usability... no [ 287s] checking bzlib.h presence... no [ 287s] checking for bzlib.h... no [ 288s] checking for libbz2... no [ 290s] checking for the pthreads library -lpthreads... no [ 291s] checking whether pthreads work without any flags... no [ 292s] checking whether pthreads work with -Kthread... no [ 292s] checking whether pthreads work with -kthread... no [ 294s] checking for the pthreads library -llthread... no [ 295s] checking whether pthreads work with -pthread... yes [ 296s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 296s] checking if more special flags are required for pthreads... no [ 297s] checking for PTHREAD_PRIO_INHERIT... yes [ 298s] checking that generated files are newer than configure... done [ 298s] configure: creating ./config.status [ 313s] config.status: creating Makefile [ 313s] config.status: creating libpcre.pc [ 314s] config.status: creating libpcre16.pc [ 314s] config.status: creating libpcre32.pc [ 315s] config.status: creating libpcreposix.pc [ 315s] config.status: creating libpcrecpp.pc [ 315s] config.status: creating pcre-config [ 316s] config.status: creating pcre.h [ 316s] config.status: creating pcre_stringpiece.h [ 316s] config.status: creating pcrecpparg.h [ 317s] config.status: creating config.h [ 317s] config.status: executing depfiles commands [ 321s] config.status: executing libtool commands [ 324s] config.status: executing script-chmod commands [ 325s] config.status: executing delete-old-chartables commands [ 325s] [ 325s] pcre-8.43 configuration summary: [ 325s] [ 325s] Install prefix .................. : /usr [ 325s] C preprocessor .................. : armv7l-tizen-linux-gnueabi-gcc -E [ 325s] C compiler ...................... : armv7l-tizen-linux-gnueabi-gcc [ 325s] C++ preprocessor ................ : armv7l-tizen-linux-gnueabi-g++ -E [ 325s] C++ compiler .................... : armv7l-tizen-linux-gnueabi-g++ [ 325s] Linker .......................... : /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 325s] C preprocessor flags ............ : [ 325s] C compiler flags ................ : -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden [ 325s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -fvisibility-inlines-hidden [ 325s] Linker flags .................... : [ 325s] Extra libraries ................. : [ 325s] [ 325s] Build 8 bit pcre library ........ : yes [ 325s] Build 16 bit pcre library ....... : no [ 325s] Build 32 bit pcre library ....... : no [ 325s] Build C++ library ............... : yes [ 325s] Enable JIT compiling support .... : yes [ 325s] Enable UTF-8/16/32 support ...... : yes [ 325s] Unicode properties .............. : yes [ 325s] Newline char/sequence ........... : lf [ 325s] \R matches only ANYCRLF ......... : no [ 325s] EBCDIC coding ................... : no [ 325s] EBCDIC code for NL .............. : n/a [ 325s] Rebuild char tables ............. : no [ 325s] Use stack recursion ............. : yes [ 325s] POSIX mem threshold ............. : 10 [ 325s] Internal link size .............. : 2 [ 325s] Nested parentheses limit ........ : 250 [ 325s] Match limit ..................... : 10000000 [ 325s] Match limit recursion ........... : MATCH_LIMIT [ 325s] Build shared libs ............... : yes [ 325s] Build static libs ............... : yes [ 325s] Use JIT in pcregrep ............. : yes [ 325s] Buffer size for pcregrep ........ : 20480 [ 325s] Link pcregrep with libz ......... : no [ 325s] Link pcregrep with libbz2 ....... : no [ 325s] Link pcretest with libedit ...... : no [ 325s] Link pcretest with libreadline .. : no [ 325s] Valgrind support ................ : no [ 325s] Code coverage ................... : no [ 325s] [ 325s] + make -j4 [ 326s] rm -f pcre_chartables.c [ 326s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 326s] make all-am [ 326s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 326s] CC libpcre_la-pcre_compile.lo [ 326s] CC libpcre_la-pcre_byte_order.lo [ 326s] CC libpcre_la-pcre_config.lo [ 326s] CC libpcre_la-pcre_dfa_exec.lo [ 329s] CC libpcre_la-pcre_exec.lo [ 329s] CC libpcre_la-pcre_fullinfo.lo [ 332s] CC libpcre_la-pcre_get.lo [ 337s] CC libpcre_la-pcre_globals.lo [ 339s] CC libpcre_la-pcre_jit_compile.lo [ 364s] CC libpcre_la-pcre_maketables.lo [ 369s] CC libpcre_la-pcre_newline.lo [ 372s] CC libpcre_la-pcre_ord2utf8.lo [ 375s] CC libpcre_la-pcre_refcount.lo [ 378s] CC libpcre_la-pcre_string_utils.lo [ 380s] CC libpcre_la-pcre_study.lo [ 381s] CC libpcre_la-pcre_tables.lo [ 383s] CC libpcre_la-pcre_ucd.lo [ 387s] CC libpcre_la-pcre_valid_utf8.lo [ 388s] CC libpcre_la-pcre_version.lo [ 391s] CC libpcre_la-pcre_xclass.lo [ 391s] CC libpcre_la-pcre_chartables.lo [ 393s] CC libpcreposix_la-pcreposix.lo [ 395s] CXX libpcrecpp_la-pcrecpp.lo [ 397s] CXX libpcrecpp_la-pcre_scanner.lo [ 411s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 415s] CC pcretest-pcretest.o [ 421s] CC pcretest-pcre_printint.o [ 422s] CC pcregrep-pcregrep.o [ 424s] CC pcre_jit_test-pcre_jit_test.o [ 427s] CXX pcrecpp_unittest-pcrecpp_unittest.o [ 431s] CXX pcre_scanner_unittest-pcre_scanner_unittest.o [ 433s] CXX pcre_stringpiece_unittest-pcre_stringpiece_unittest.o [ 463s] CCLD libpcre.la [ 465s] CCLD libpcreposix.la [ 465s] CXXLD libpcrecpp.la [ 465s] CCLD pcre_jit_test [ 466s] CCLD pcregrep [ 466s] CCLD pcretest [ 467s] CXXLD pcrecpp_unittest [ 467s] CXXLD pcre_scanner_unittest [ 468s] CXXLD pcre_stringpiece_unittest [ 471s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 471s] + exit 0 [ 471s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.b75ZO5 [ 471s] + umask 022 [ 471s] + cd /home/abuild/rpmbuild/BUILD [ 471s] + cd pcre-8.43 [ 471s] + LANG=C [ 471s] + export LANG [ 471s] + unset DISPLAY [ 471s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm [ 471s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm [ 471s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm install [ 471s] /bin/make install-am [ 472s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 472s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 472s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib' [ 472s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib' [ 473s] libtool: install: /bin/install -c .libs/libpcre.so.1.2.11 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcre.so.1.2.11 [ 473s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib && { ln -s -f libpcre.so.1.2.11 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.2.11 libpcre.so.1; }; }) [ 473s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib && { ln -s -f libpcre.so.1.2.11 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.2.11 libpcre.so; }; }) [ 473s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcre.la [ 473s] libtool: install: warning: relinking `libpcreposix.la' [ 473s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fvisibility=hidden -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:6:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm) [ 475s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.6T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcreposix.so.0.0.6 [ 475s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.6 libpcreposix.so.0; }; }) [ 475s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.6 libpcreposix.so; }; }) [ 475s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcreposix.la [ 475s] libtool: install: warning: relinking `libpcrecpp.la' [ 475s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:1:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm) [ 478s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.1T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcrecpp.so.0.0.1 [ 478s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so.0; }; }) [ 478s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so; }; }) [ 478s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcrecpp.la [ 478s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcre.a [ 478s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcre.a [ 478s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcre.a [ 478s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcreposix.a [ 478s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcreposix.a [ 478s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcreposix.a [ 478s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcrecpp.a [ 478s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcrecpp.a [ 478s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcrecpp.a [ 478s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 479s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin' [ 479s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin' [ 479s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 479s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 479s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib' [ 479s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin/pcretest [ 480s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 480s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 480s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib' [ 480s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin/pcregrep [ 480s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin' [ 480s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin' [ 480s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre' [ 480s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre' [ 481s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre/html' [ 481s] /bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre-config.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre32.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_exec.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_utf32_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre/html' [ 481s] /bin/install -c -m 644 doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre/html' [ 481s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre/html' [ 481s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre/html' [ 481s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/include' [ 481s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/include' [ 481s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man1' [ 481s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man1' [ 482s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3' [ 482s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre32.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_exec.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_utf32_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcredemo.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3' [ 482s] /bin/install -c -m 644 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3' [ 482s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/include' [ 482s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/include' [ 482s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/pkgconfig' [ 482s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/pkgconfig' [ 482s] /bin/make install-data-hook [ 483s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 483s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 483s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_compile.3 [ 483s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_compile2.3 [ 483s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_config.3 [ 483s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 483s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 483s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 483s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_exec.3 [ 483s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_free_study.3 [ 483s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_free_substring.3 [ 483s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 483s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 483s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 483s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 483s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 483s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_get_substring.3 [ 483s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 483s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_jit_exec.3 [ 483s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 483s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 483s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_maketables.3 [ 483s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 483s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_refcount.3 [ 483s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_study.3 [ 483s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 483s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre16_version.3 [ 483s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_assign_jit_stack.3 [ 483s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_compile.3 [ 483s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_compile2.3 [ 483s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_config.3 [ 483s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_copy_named_substring.3 [ 484s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_copy_substring.3 [ 484s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_dfa_exec.3 [ 484s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_exec.3 [ 484s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_free_study.3 [ 484s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_free_substring.3 [ 484s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_free_substring_list.3 [ 484s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_fullinfo.3 [ 484s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_get_named_substring.3 [ 484s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_get_stringnumber.3 [ 484s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_get_stringtable_entries.3 [ 484s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_get_substring.3 [ 484s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_get_substring_list.3 [ 484s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_jit_exec.3 [ 484s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_jit_stack_alloc.3 [ 484s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_jit_stack_free.3 [ 484s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_maketables.3 [ 484s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_pattern_to_host_byte_order.3 [ 484s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_refcount.3 [ 484s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_study.3 [ 484s] ln -sf pcre_utf32_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_utf32_to_host_byte_order.3 [ 484s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/man/man3/pcre32_version.3 [ 484s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 484s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 484s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 484s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/info/dir [ 484s] + xargs rm -f -- [ 484s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm -regex '.*\.la$' [ 484s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm//usr/share/doc/packages [ 484s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm//usr/share/doc/packages/pcre-doc [ 484s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/*.la' [ 484s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pcre-8.43 [ 485s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin/pcregrep [ 486s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/bin/pcretest [ 487s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcre.so.1.2.11 [ 487s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcrecpp.so.0.0.1 [ 488s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/lib/libpcreposix.so.0.0.6 [ 489s] 4373 blocks [ 489s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debuginfo.manifest [ 489s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debugsource.manifest [ 489s] + /usr/lib/rpm/check-buildroot [ 490s] + /usr/lib/rpm//brp-compress [ 502s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 517s] + /usr/lib/rpm/brp-python-hardlink [ 518s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm [ 518s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.aWQkf8 [ 518s] + umask 022 [ 518s] + cd /home/abuild/rpmbuild/BUILD [ 518s] + cd pcre-8.43 [ 518s] + export LANG=POSIX [ 518s] + LANG=POSIX [ 518s] + make check [ 518s] make check-am [ 519s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 519s] make [ 519s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 519s] make all-am [ 520s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 520s] make[3]: Nothing to be done for 'all-am'. [ 520s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 520s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 520s] make check-TESTS [ 520s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 521s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 536s] PASS: pcre_jit_test [ 537s] PASS: pcrecpp_unittest [ 538s] PASS: pcre_scanner_unittest [ 538s] PASS: pcre_stringpiece_unittest [ 564s] PASS: RunTest [ 599s] PASS: RunGrepTest [ 599s] ============================================================================ [ 599s] Testsuite summary for PCRE 8.43 [ 599s] ============================================================================ [ 599s] # TOTAL: 6 [ 599s] # PASS: 6 [ 599s] # SKIP: 0 [ 599s] # XFAIL: 0 [ 599s] # FAIL: 0 [ 599s] # XPASS: 0 [ 599s] # ERROR: 0 [ 599s] ============================================================================ [ 599s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 599s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 599s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 599s] + exit 0 [ 599s] Processing files: pcre-debugsource-8.43-3.9.armv7l [ 599s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 599s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 599s] [ 599s] Provides: pcre-debugsource = 8.43-3.9 pcre-debugsource(armv7l-32) = 8.43-3.9 [ 599s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 599s] Processing files: pcre-devel-8.43-3.9.armv7l [ 599s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 599s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 599s] [ 603s] Provides: pcre-devel = 8.43-3.9 pcre-devel(armv7l-32) = 8.43-3.9 pkgconfig(libpcre) = 8.43 pkgconfig(libpcrecpp) = 8.43 pkgconfig(libpcreposix) = 8.43 [ 603s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 603s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1 libpcrecpp.so.0 libpcreposix.so.0 pkgconfig(libpcre) [ 603s] Processing files: pcre-devel-static-8.43-3.9.armv7l [ 603s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 603s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 603s] [ 603s] Provides: pcre-devel-static = 8.43-3.9 pcre-devel-static(armv7l-32) = 8.43-3.9 [ 603s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 603s] Processing files: libpcre-8.43-3.9.armv7l [ 603s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 603s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 603s] [ 603s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Iwj5c9 [ 603s] + umask 022 [ 603s] + cd /home/abuild/rpmbuild/BUILD [ 603s] + cd pcre-8.43 [ 603s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcre [ 603s] + export LICENSEDIR [ 603s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcre [ 603s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcre [ 603s] + exit 0 [ 603s] Provides: libpcre = 8.43-3.9 libpcre(armv7l-32) = 8.43-3.9 libpcre.so.1 pcre = 8.43 [ 603s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 603s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 603s] Requires(post): /sbin/ldconfig [ 603s] Requires(postun): /sbin/ldconfig [ 603s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 603s] Obsoletes: pcre < 8.43 [ 603s] Processing files: libpcreposix-8.43-3.9.armv7l [ 603s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 603s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 603s] [ 603s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.zGHro6 [ 603s] + umask 022 [ 603s] + cd /home/abuild/rpmbuild/BUILD [ 603s] + cd pcre-8.43 [ 603s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcreposix [ 603s] + export LICENSEDIR [ 603s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcreposix [ 603s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcreposix [ 603s] + exit 0 [ 604s] Provides: libpcreposix = 8.43-3.9 libpcreposix(armv7l-32) = 8.43-3.9 libpcreposix.so.0 [ 604s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 604s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 604s] Requires(post): /sbin/ldconfig [ 604s] Requires(postun): /sbin/ldconfig [ 604s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 rtld(GNU_HASH) [ 604s] Processing files: libpcrecpp-8.43-3.9.armv7l [ 604s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 604s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 604s] [ 604s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.zQQW14 [ 604s] + umask 022 [ 604s] + cd /home/abuild/rpmbuild/BUILD [ 604s] + cd pcre-8.43 [ 604s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcrecpp [ 604s] + export LICENSEDIR [ 604s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcrecpp [ 604s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/libpcrecpp [ 604s] + exit 0 [ 604s] Provides: libpcrecpp = 8.43-3.9 libpcrecpp(armv7l-32) = 8.43-3.9 libpcrecpp.so.0 [ 604s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 604s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 604s] Requires(post): /sbin/ldconfig [ 604s] Requires(postun): /sbin/ldconfig [ 604s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.8) libstdc++.so.6(CXXABI_1.3.9) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 604s] Processing files: pcre-doc-8.43-3.9.noarch [ 604s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 604s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 604s] [ 604s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.rZMHy7 [ 604s] + umask 022 [ 604s] + cd /home/abuild/rpmbuild/BUILD [ 604s] + cd pcre-8.43 [ 604s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + export DOCDIR [ 604s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/doc/packages/pcre-doc [ 604s] + exit 0 [ 606s] Provides: pcre-doc = 8.43-3.9 [ 606s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 606s] Processing files: pcre-tools-8.43-3.9.armv7l [ 606s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 606s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 606s] [ 606s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.STTls5 [ 606s] + umask 022 [ 606s] + cd /home/abuild/rpmbuild/BUILD [ 606s] + cd pcre-8.43 [ 606s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/pcre-tools [ 606s] + export LICENSEDIR [ 606s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/pcre-tools [ 606s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm/usr/share/licenses/pcre-tools [ 606s] + exit 0 [ 607s] Provides: pcre-tools = 8.43-3.9 pcre-tools(armv7l-32) = 8.43-3.9 [ 607s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 607s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 607s] Processing files: libpcre-debuginfo-8.43-3.9.armv7l [ 607s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 607s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 607s] [ 607s] Provides: libpcre-debuginfo = 8.43-3.9 libpcre-debuginfo(armv7l-32) = 8.43-3.9 [ 607s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 607s] Processing files: libpcreposix-debuginfo-8.43-3.9.armv7l [ 607s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 607s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 607s] [ 607s] Provides: libpcreposix-debuginfo = 8.43-3.9 libpcreposix-debuginfo(armv7l-32) = 8.43-3.9 [ 607s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 607s] Processing files: libpcrecpp-debuginfo-8.43-3.9.armv7l [ 607s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 607s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 607s] [ 607s] Provides: libpcrecpp-debuginfo = 8.43-3.9 libpcrecpp-debuginfo(armv7l-32) = 8.43-3.9 [ 607s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 607s] Processing files: pcre-tools-debuginfo-8.43-3.9.armv7l [ 607s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 607s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 607s] [ 607s] warning: File listed twice: /usr/lib/debug/.build-id [ 607s] Provides: pcre-tools-debuginfo = 8.43-3.9 pcre-tools-debuginfo(armv7l-32) = 8.43-3.9 [ 607s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 607s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm [ 608s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.43-3.9.src.rpm [ 611s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.43-3.9.armv7l.rpm [ 612s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.43-3.9.armv7l.rpm [ 613s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.43-3.9.armv7l.rpm [ 613s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.43-3.9.armv7l.rpm [ 614s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.43-3.9.armv7l.rpm [ 614s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.43-3.9.armv7l.rpm [ 617s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-3.9.noarch.rpm [ 617s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.43-3.9.armv7l.rpm [ 619s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.43-3.9.armv7l.rpm [ 620s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.43-3.9.armv7l.rpm [ 620s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.43-3.9.armv7l.rpm [ 621s] XZ: Adjusted the number of threads from 36 to 15 to not exceed the memory usage limit of 2684354558 bytesWrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.43-3.9.armv7l.rpm [ 621s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.eWXmD8 [ 621s] + umask 022 [ 621s] + cd /home/abuild/rpmbuild/BUILD [ 621s] + cd pcre-8.43 [ 621s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-3.9.arm [ 621s] + exit 0 [ 622s] ... checking for files with abuild user/group [ 622s] ... creating baselibs [ 623s] no targets for arch armv7l, nothing to do [ 623s] ... comparing built packages with the former built [ 623s] /usr/lib/build/pkg-diff.sh [ 623s] compare /.build.oldpackages/pcre-8.43-3.8.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.43-3.9.src.rpm [ 625s] This is not a prerelease project. Compare the project name. [ 625s] comparing rpmtags [ 626s] comparing RELEASE [ 626s] comparing PROVIDES [ 627s] comparing scripts [ 627s] comparing filelist [ 628s] comparing file checksum [ 628s] RPM meta information is identical [ 628s] compare /.build.oldpackages/libpcre-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.43-3.9.armv7l.rpm [ 629s] Comparing libpcre-8.43-3.8.armv7l.rpm to libpcre-8.43-3.9.armv7l.rpm [ 630s] This is not a prerelease project. Compare the project name. [ 630s] comparing rpmtags [ 631s] comparing RELEASE [ 632s] comparing PROVIDES [ 633s] comparing scripts [ 633s] comparing filelist [ 634s] comparing file checksum [ 634s] creating rename script [ 634s] RPM file checksum differs. [ 634s] Extracting packages [ 649s] /usr/lib/libpcre.so.1.2.11: only difference was in build-id or gnu_debuglink, GOOD. [ 649s] Package content is identical [ 649s] compare /.build.oldpackages/libpcre-debuginfo-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.43-3.9.armv7l.rpm [ 649s] skipping -debuginfo package [ 649s] compare /.build.oldpackages/libpcrecpp-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.43-3.9.armv7l.rpm [ 650s] Comparing libpcrecpp-8.43-3.8.armv7l.rpm to libpcrecpp-8.43-3.9.armv7l.rpm [ 651s] This is not a prerelease project. Compare the project name. [ 651s] comparing rpmtags [ 652s] comparing RELEASE [ 653s] comparing PROVIDES [ 653s] comparing scripts [ 654s] comparing filelist [ 654s] comparing file checksum [ 654s] creating rename script [ 655s] RPM file checksum differs. [ 655s] Extracting packages [ 659s] /usr/lib/libpcrecpp.so.0.0.1: only difference was in build-id or gnu_debuglink, GOOD. [ 659s] Package content is identical [ 659s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.43-3.9.armv7l.rpm [ 659s] skipping -debuginfo package [ 659s] compare /.build.oldpackages/libpcreposix-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.43-3.9.armv7l.rpm [ 660s] Comparing libpcreposix-8.43-3.8.armv7l.rpm to libpcreposix-8.43-3.9.armv7l.rpm [ 661s] This is not a prerelease project. Compare the project name. [ 661s] comparing rpmtags [ 662s] comparing RELEASE [ 663s] comparing PROVIDES [ 663s] comparing scripts [ 663s] comparing filelist [ 664s] comparing file checksum [ 664s] creating rename script [ 664s] RPM file checksum differs. [ 665s] Extracting packages [ 668s] /usr/lib/libpcreposix.so.0.0.6: only difference was in build-id or gnu_debuglink, GOOD. [ 668s] Package content is identical [ 668s] compare /.build.oldpackages/libpcreposix-debuginfo-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.43-3.9.armv7l.rpm [ 668s] skipping -debuginfo package [ 668s] compare /.build.oldpackages/pcre-debugsource-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.43-3.9.armv7l.rpm [ 669s] Comparing pcre-debugsource-8.43-3.8.armv7l.rpm to pcre-debugsource-8.43-3.9.armv7l.rpm [ 669s] This is not a prerelease project. Compare the project name. [ 670s] comparing rpmtags [ 671s] comparing RELEASE [ 671s] comparing PROVIDES [ 672s] comparing scripts [ 672s] comparing filelist [ 673s] comparing file checksum [ 673s] creating rename script [ 673s] RPM meta information is identical [ 673s] compare /.build.oldpackages/pcre-devel-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.43-3.9.armv7l.rpm [ 674s] Comparing pcre-devel-8.43-3.8.armv7l.rpm to pcre-devel-8.43-3.9.armv7l.rpm [ 675s] This is not a prerelease project. Compare the project name. [ 675s] comparing rpmtags [ 676s] comparing RELEASE [ 677s] comparing PROVIDES [ 677s] comparing scripts [ 678s] comparing filelist [ 678s] comparing file checksum [ 678s] creating rename script [ 679s] RPM meta information is identical [ 679s] compare /.build.oldpackages/pcre-devel-static-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.43-3.9.armv7l.rpm [ 679s] Comparing pcre-devel-static-8.43-3.8.armv7l.rpm to pcre-devel-static-8.43-3.9.armv7l.rpm [ 680s] This is not a prerelease project. Compare the project name. [ 680s] comparing rpmtags [ 681s] comparing RELEASE [ 682s] comparing PROVIDES [ 682s] comparing scripts [ 683s] comparing filelist [ 683s] comparing file checksum [ 683s] creating rename script [ 684s] RPM file checksum differs. [ 684s] Extracting packages [ 686s] /usr/lib/libpcre_la-pcre_byte_order.o differs in ELF section .comment [ 686s] --- /tmp/tmp.DViUs20302/tmp.qRKJT20910 2020-09-18 06:21:38.000000000 +0000 [ 686s] +++ /tmp/tmp.DViUs20302/tmp.tZbyN20913 2020-09-18 06:21:38.000000000 +0000 [ 686s] @@ -4,4 +4,4 @@ [ 686s] Contents of section .comment: [ 686s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 686s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 686s] - 0020 342e3229 20392e32 2e3000 4.2) 9.2.0. [ 686s] + 0020 352e3229 20392e32 2e3000 5.2) 9.2.0. [ 686s] compare /.build.oldpackages/pcre-doc-8.43-3.8.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-3.9.noarch.rpm [ 687s] Comparing pcre-doc-8.43-3.8.noarch.rpm to pcre-doc-8.43-3.9.noarch.rpm [ 688s] This is not a prerelease project. Compare the project name. [ 688s] comparing rpmtags [ 689s] comparing RELEASE [ 690s] comparing PROVIDES [ 690s] comparing scripts [ 691s] comparing filelist [ 691s] comparing file checksum [ 691s] creating rename script [ 692s] RPM meta information is identical [ 692s] compare /.build.oldpackages/pcre-tools-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.43-3.9.armv7l.rpm [ 692s] Comparing pcre-tools-8.43-3.8.armv7l.rpm to pcre-tools-8.43-3.9.armv7l.rpm [ 693s] This is not a prerelease project. Compare the project name. [ 694s] comparing rpmtags [ 695s] comparing RELEASE [ 695s] comparing PROVIDES [ 696s] comparing scripts [ 696s] comparing filelist [ 697s] comparing file checksum [ 697s] creating rename script [ 697s] RPM file checksum differs. [ 697s] Extracting packages [ 702s] /usr/bin/pcregrep: only difference was in build-id or gnu_debuglink, GOOD. [ 706s] /usr/bin/pcretest: only difference was in build-id or gnu_debuglink, GOOD. [ 706s] Package content is identical [ 706s] compare /.build.oldpackages/pcre-tools-debuginfo-8.43-3.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.43-3.9.armv7l.rpm [ 706s] skipping -debuginfo package [ 706s] [ 706s] obsnw19 finished "build pcre.spec" at Fri Sep 18 06:21:58 UTC 2020. [ 706s] Retried build at Mon Sep 28 02:41:32 2020 returned same result, skipped