[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw13 started "build _service:gbs:attr.spec" at Wed Dec 30 13:49:41 UTC 2020. [ 0s] [ 0s] Building attr for project 'Tizen:Base:Tool' repository 'standard' arch 'armv7l' srcmd5 '161c78bada6534c5cc6d19457cc7abc4' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:attr.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:attr.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:attr.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libgcc... [ 1s] [7/40] preinstalling bash... [ 1s] [8/40] preinstalling diffutils... [ 1s] [9/40] preinstalling grep... [ 1s] [10/40] preinstalling libattr... [ 1s] [11/40] preinstalling libblkid... [ 1s] [12/40] preinstalling libbz2... [ 1s] [13/40] preinstalling libcap... [ 1s] [14/40] preinstalling libfreebl3... [ 1s] [15/40] preinstalling liblua... [ 1s] [16/40] preinstalling liblzma... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libreadline... [ 1s] [19/40] preinstalling libsmack... [ 1s] [20/40] preinstalling libsqlite... [ 1s] [21/40] preinstalling libuuid... [ 1s] [22/40] preinstalling nspr... [ 1s] [23/40] preinstalling sed... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 6s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [27/40] preinstalling coreutils... [ 7s] [28/40] preinstalling libacl... [ 7s] [29/40] preinstalling libelf... [ 7s] [30/40] preinstalling libmount... [ 7s] [31/40] preinstalling smack... [ 7s] [32/40] preinstalling bzip2... [ 7s] [33/40] preinstalling libmagic... [ 7s] [34/40] preinstalling libxml2... [ 7s] [35/40] preinstalling tar... [ 7s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] running qemu-linux-user-x86_64-cross postinstall script [ 7s] running qemu-accel-x86_64-armv7l postinstall script [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] reordering...cycle: libsoftokn3 -> nss [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 10s] [1/93] installing libmagic-data-5.39-4.22 [ 10s] [2/93] installing setup-0.9-4.12 [ 10s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [3/93] installing filesystem-3.1-3.1 [ 10s] [4/93] installing glibc-2.30-5.22 [ 10s] [5/93] installing libatomic-9.2.0-7.17 [ 11s] [6/93] installing libgcc-9.2.0-7.17 [ 11s] [7/93] installing bash-3.2.57-4.2 [ 11s] [8/93] installing cpio-2.11-3.1 [ 11s] [9/93] installing diffutils-3.3-3.1 [ 11s] [10/93] installing findutils-4.3.8-3.85 [ 11s] [11/93] installing gdbm-1.8.3-3.98 [ 11s] [12/93] installing hostname-3.23-3.1 [ 11s] [13/93] installing libattr-2.4.48-4.29 [ 12s] [14/93] installing libblkid-2.36-7.6 [ 12s] [15/93] installing libbz2-1.0.8-4.45 [ 12s] [16/93] installing libcap-2.24-3.94 [ 13s] [17/93] installing libext2fs-1.43.4-3.1 [ 13s] [18/93] installing libfreebl3-3.34.1-3.63 [ 13s] [19/93] installing libgfortran-9.2.0-7.17 [ 14s] [20/93] installing libgomp-9.2.0-7.17 [ 14s] [21/93] installing libitm-9.2.0-7.17 [ 14s] [22/93] installing libltdl-2.4.2-3.66 [ 14s] [23/93] installing liblua-5.1.5-3.82 [ 16s] [24/93] installing liblzma-5.2.4-3.75 [ 16s] [25/93] installing libpcre-8.44-4.5 [ 16s] [26/93] installing libpopt-1.16-3.93 [ 17s] [27/93] installing libsmack-1.3.1-3.88 [ 17s] [28/93] installing libsmartcols-2.36-7.6 [ 17s] [29/93] installing libsqlite-3.33.0-4.19 [ 17s] [30/93] installing libstdc++-9.2.0-7.17 [ 18s] [31/93] installing libuuid-2.36-7.6 [ 18s] [32/93] installing m4-1.4.17-2.1 [ 18s] [33/93] installing net-tools-2.0_20121208git-4.1 [ 18s] [34/93] installing nspr-4.12-3.92 [ 18s] [35/93] installing patch-2.7-3.85 [ 18s] [36/93] installing pkg-config-0.28-3.82 [ 18s] [37/93] installing sed-4.1c-3.1 [ 18s] [38/93] installing update-alternatives-1.20.5-3.1 [ 18s] [39/93] installing which-2.17-4.1 [ 19s] [40/93] installing zlib-1.2.11-3.90 [ 19s] [41/93] installing build-compare-2015.04.28-3.31 [ 19s] [42/93] installing libstdc++-devel-9.2.0-7.17 [ 19s] [43/93] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 21s] [44/93] installing terminfo-base-full-6.2-5.16 [ 21s] [45/93] installing cpp-9.2.0-7.17 [ 21s] [46/93] installing gcc-c++-9.2.0-7.17 [ 22s] [47/93] installing binutils-2.33.1-7.22 [ 22s] [48/93] installing coreutils-6.9-4.20 [ 22s] [49/93] installing gawk-3.1.5-4.1 [ 22s] [50/93] installing grep-2.5.2-3.1 [ 22s] [51/93] installing libacl-2.2.53-4.30 [ 23s] [52/93] installing libcc1-9.2.0-7.17 [ 23s] [53/93] installing libelf-0.178-3.24 [ 23s] [54/93] installing libmount-2.36-7.6 [ 24s] [55/93] installing libubsan-9.2.0-7.17 [ 24s] [56/93] installing make-4.0-2.22 [ 24s] [57/93] installing nss-certs-3.34.1-3.63 [ 24s] [58/93] installing smack-1.3.1-3.88 [ 24s] [59/93] installing bzip2-1.0.8-4.45 [ 24s] [60/93] installing libfdisk-2.36-7.6 [ 25s] [61/93] installing libmagic-5.39-4.22 [ 25s] [62/93] installing libxml2-2.9.10-3.60 [ 25s] [63/93] installing perl-5.32.0-4.1 [ 27s] [64/93] installing xz-5.2.4-3.75 [ 27s] [65/93] installing build-mkbaselibs-20120927-3.1 [ 27s] [66/93] installing linux-glibc-devel-3.10-3.97 [ 28s] [67/93] installing autoconf-2.69-3.50 [ 28s] [68/93] installing file-5.39-4.22 [ 28s] [69/93] installing glibc-locale-2.30-5.22 [ 29s] [70/93] installing tar-1.17-2.3 [ 29s] [71/93] installing gzip-1.3.12-3.93 [ 29s] [72/93] installing libncurses6-6.2-5.16 [ 29s] [73/93] installing pam-1.1.6-3.1 [ 29s] [74/93] installing tzdata-2020a-3.1 [ 30s] [75/93] installing libdw-0.178-3.24 [ 30s] [76/93] installing gcc-9.2.0-7.17 [ 31s] [77/93] installing libncurses-6.2-5.16 [ 31s] [78/93] installing glibc-devel-2.30-5.22 [ 31s] [79/93] installing qemu-accel-x86_64-armv7l-0.4-1.13 [ 45s] [80/93] installing automake-1.15.1-3.65 [ 45s] [81/93] installing less-466-3.1 [ 45s] [82/93] installing libreadline-5.2-3.9 [ 45s] [83/93] installing procps-ng-3.3.16-3.1 [ 46s] [84/93] installing libasm-0.178-3.24 [ 46s] [85/93] installing build-20120927-3.1 [ 46s] [86/93] installing libtool-2.4.2-3.66 [ 46s] [87/93] installing elfutils-0.178-3.24 [ 46s] [88/93] installing util-linux-2.36-7.6 [ 46s] [89/93] installing util-linux-su-2.36-7.6 [ 46s] [90/93] installing nss-3.34.1-3.63 [ 46s] [91/93] installing libsoftokn3-3.34.1-3.63 [ 47s] [92/93] installing rpm-4.11.0.1-4.13 [ 47s] [93/93] installing rpm-build-4.11.0.1-4.13 [ 47s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 47s] now finalizing build dir... [ 47s] Running build time source services... [ 48s] build target is armv7l-tizen-linux [ 48s] ----------------------------------------------------------------- [ 48s] I have the following modifications for attr.spec: [ 48s] 8c8 [ 48s] < Release: 0 [ 48s] --- [ 48s] > Release: 4.30 [ 48s] ----------------------------------------------------------------- [ 48s] ----- building attr.spec (user abuild) [ 48s] ----------------------------------------------------------------- [ 48s] ----------------------------------------------------------------- [ 48s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base:Tool/standard/161c78bada6534c5cc6d19457cc7abc4-attr' -ba /home/abuild/rpmbuild/SOURCES/attr.spec [ 48s] Building target platforms: armv7l-tizen-linux [ 48s] Building for target armv7l-tizen-linux [ 48s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.2LgDvr [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + rm -rf attr-2.4.48 [ 48s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/attr-2.4.48.src.tar.gz [ 48s] + /bin/tar -xf - [ 48s] + STATUS=0 [ 48s] + '[' 0 -ne 0 ']' [ 48s] + cd attr-2.4.48 [ 48s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 48s] + echo 'Patch #0 (0001-Bump-to-attr-2.4.48.patch):' [ 48s] Patch #0 (0001-Bump-to-attr-2.4.48.patch): [ 48s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Bump-to-attr-2.4.48.patch [ 48s] + /bin/patch -p1 --fuzz=2 [ 48s] patching file tools/Makemodule.am [ 48s] + cp /home/abuild/rpmbuild/SOURCES/attr.manifest . [ 48s] + exit 0 [ 48s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.jmIGvu [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd attr-2.4.48 [ 48s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 48s] + LANG=C [ 48s] + export LANG [ 48s] + unset DISPLAY [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CFLAGS [ 48s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CXXFLAGS [ 48s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 48s] + export FFLAGS [ 48s] + LDFLAGS= [ 48s] + export LDFLAGS [ 48s] + export 'OPTIMIZER=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + OPTIMIZER='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export DEBUG=-DNDEBUG [ 48s] + DEBUG=-DNDEBUG [ 48s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 48s] + export 'LDFLAGS= -Wl,-z,relro -pie' [ 48s] + LDFLAGS=' -Wl,-z,relro -pie' [ 48s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 48s] + export CFLAGS [ 48s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 48s] + export CXXFLAGS [ 48s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 48s] + export FFLAGS [ 48s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-gettext=no --exec-prefix=/ --sbindir=/usr/sbin --libdir=/usr/lib --libexecdir=/usr/lib --with-pic --enable-static=no [ 48s] configure: WARNING: unrecognized options: --enable-gettext [ 48s] checking for a BSD-compatible install... /bin/install -c [ 48s] checking whether build environment is sane... yes [ 48s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 48s] checking for gawk... gawk [ 48s] checking whether make sets $(MAKE)... yes [ 48s] checking whether make supports nested variables... yes [ 48s] checking whether make supports nested variables... (cached) yes [ 48s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 49s] checking whether the C compiler works... yes [ 49s] checking for C compiler default output file name... a.out [ 49s] checking for suffix of executables... [ 49s] checking whether we are cross compiling... no [ 49s] checking for suffix of object files... o [ 49s] checking whether we are using the GNU C compiler... yes [ 49s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 49s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 49s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 49s] checking for style of include used by make... GNU [ 49s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 49s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 49s] checking for grep that handles long lines and -e... /bin/grep [ 49s] checking for egrep... /bin/grep -E [ 49s] checking for ANSI C header files... yes [ 49s] checking for sys/types.h... yes [ 49s] checking for sys/stat.h... yes [ 49s] checking for stdlib.h... yes [ 49s] checking for string.h... yes [ 49s] checking for memory.h... yes [ 49s] checking for strings.h... yes [ 49s] checking for inttypes.h... yes [ 49s] checking for stdint.h... yes [ 49s] checking for unistd.h... yes [ 49s] checking minix/config.h usability... no [ 49s] checking minix/config.h presence... no [ 49s] checking for minix/config.h... no [ 49s] checking whether it is safe to define __EXTENSIONS__... yes [ 49s] checking for an ANSI C-conforming const... yes [ 49s] checking for mode_t... yes [ 50s] checking for size_t... yes [ 50s] checking for working alloca.h... yes [ 50s] checking for alloca... yes [ 50s] checking whether __attribute__((visibility())) is supported... yes [ 50s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 50s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 50s] checking for armv7l-tizen-linux-gnueabi-link... no [ 50s] checking for ar... ar [ 50s] checking the archiver (ar) interface... ar [ 50s] checking build system type... armv7l-tizen-linux-gnueabi [ 50s] checking host system type... armv7l-tizen-linux-gnueabi [ 50s] checking how to print strings... printf [ 50s] checking for a sed that does not truncate output... /bin/sed [ 50s] checking for fgrep... /bin/grep -F [ 50s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 50s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 50s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 50s] checking the name lister (/bin/nm -B) interface... BSD nm [ 50s] checking whether ln -s works... yes [ 50s] checking the maximum length of command line arguments... 1572864 [ 50s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 50s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 50s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 50s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 50s] checking for objdump... objdump [ 50s] checking how to recognize dependent libraries... pass_all [ 50s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 50s] checking for dlltool... no [ 50s] checking how to associate runtime and link libraries... printf %s\n [ 50s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 50s] checking for archiver @FILE support... @ [ 50s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 50s] checking for strip... strip [ 50s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 50s] checking for ranlib... ranlib [ 50s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 50s] checking for sysroot... no [ 50s] checking for a working dd... /bin/dd [ 50s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 50s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 50s] checking for mt... no [ 50s] checking if : is a manifest tool... no [ 50s] checking for dlfcn.h... yes [ 50s] checking for objdir... .libs [ 50s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 50s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 50s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 50s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 50s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 50s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 50s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 50s] checking whether -lc should be explicitly linked in... no [ 50s] checking dynamic linker characteristics... GNU/Linux ld.so [ 50s] checking how to hardcode library paths into programs... immediate [ 50s] checking whether stripping libraries is possible... yes [ 50s] checking if libtool supports shared libraries... yes [ 50s] checking whether to build shared libraries... yes [ 50s] checking whether to build static libraries... no [ 50s] checking whether NLS is requested... yes [ 50s] checking for msgfmt... no [ 50s] checking for gmsgfmt... : [ 50s] checking for xgettext... no [ 50s] checking for msgmerge... no [ 50s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 50s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 50s] checking for shared library run path origin... done [ 50s] checking for CFPreferencesCopyAppValue... no [ 50s] checking for CFLocaleCopyCurrent... no [ 50s] checking for GNU gettext in libc... yes [ 50s] checking whether to use NLS... yes [ 50s] checking where the gettext function comes from... libc [ 51s] checking that generated files are newer than configure... done [ 51s] configure: creating ./config.status [ 51s] config.status: creating libattr.pc [ 51s] config.status: creating Makefile [ 51s] config.status: creating po/Makefile.in [ 51s] config.status: creating include/config.h [ 51s] config.status: executing depfiles commands [ 51s] config.status: executing libtool commands [ 51s] config.status: executing po-directories commands [ 51s] config.status: creating po/POTFILES [ 51s] config.status: creating po/Makefile [ 52s] config.status: executing include/attr commands [ 52s] configure: WARNING: unrecognized options: --enable-gettext [ 52s] + /bin/make -j4 [ 52s] cd . && /bin/sh /home/abuild/rpmbuild/BUILD/attr-2.4.48/build-aux/missing automake-1.15 --foreign Makefile [ 55s] cd . && /bin/sh ./config.status Makefile depfiles [ 55s] config.status: creating Makefile [ 55s] config.status: executing depfiles commands [ 55s] Making all in po [ 55s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48/po' [ 55s] make[1]: Nothing to be done for 'all'. [ 55s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48/po' [ 55s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 55s] CC libattr/libattr_la-attr_copy_check.lo [ 55s] CC libattr/libattr_la-attr_copy_action.lo [ 55s] CC libattr/libattr_la-attr_copy_fd.lo [ 55s] CC libattr/libattr_la-attr_copy_file.lo [ 55s] CC libattr/libattr_la-libattr.lo [ 55s] CC libattr/libattr_la-syscalls.lo [ 55s] CC libmisc/high_water_alloc.lo [ 55s] CC libmisc/next_line.lo [ 55s] CC libmisc/quote.lo [ 55s] CC libmisc/unquote.lo [ 55s] CC libmisc/walk_tree.lo [ 56s] CC tools/attr.o [ 56s] CC tools/getfattr.o [ 56s] CC tools/setfattr.o [ 56s] CCLD libattr.la [ 56s] CCLD libmisc.la [ 56s] CCLD attr [ 56s] CCLD getfattr [ 56s] CCLD setfattr [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 56s] + exit 0 [ 56s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.05M93q [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd attr-2.4.48 [ 56s] + LANG=C [ 56s] + export LANG [ 56s] + unset DISPLAY [ 56s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm [ 56s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm [ 56s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm install [ 56s] Making install in po [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48/po' [ 56s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/cs/LC_MESSAGES/attr.mo [ 56s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/de/LC_MESSAGES/attr.mo [ 56s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/es/LC_MESSAGES/attr.mo [ 56s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/fr/LC_MESSAGES/attr.mo [ 56s] installing gl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/gl/LC_MESSAGES/attr.mo [ 56s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/nl/LC_MESSAGES/attr.mo [ 56s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/pl/LC_MESSAGES/attr.mo [ 56s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/sv/LC_MESSAGES/attr.mo [ 56s] installing en@boldquot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/en@boldquot/LC_MESSAGES/attr.mo [ 56s] installing en@quot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/locale/en@quot/LC_MESSAGES/attr.mo [ 56s] if test "attr" = "gettext-tools"; then \ [ 56s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/gettext/po; \ [ 56s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 56s] /bin/install -c -m 644 ./$file \ [ 56s] /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/gettext/po/$file; \ [ 56s] done; \ [ 56s] for file in Makevars; do \ [ 56s] rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/gettext/po/$file; \ [ 56s] done; \ [ 56s] else \ [ 56s] : ; \ [ 56s] fi [ 56s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48/po' [ 56s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 56s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 56s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib' [ 56s] /bin/sh ./libtool --mode=install /bin/install -c libattr.la '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib' [ 56s] libtool: install: /bin/install -c .libs/libattr.so.1.1.2448 /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib/libattr.so.1.1.2448 [ 56s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib && { ln -s -f libattr.so.1.1.2448 libattr.so.1 || { rm -f libattr.so.1 && ln -s libattr.so.1.1.2448 libattr.so.1; }; }) [ 56s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib && { ln -s -f libattr.so.1.1.2448 libattr.so || { rm -f libattr.so && ln -s libattr.so.1.1.2448 libattr.so; }; }) [ 56s] libtool: install: /bin/install -c .libs/libattr.lai /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib/libattr.la [ 56s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 56s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin' [ 56s] /bin/sh ./libtool --mode=install /bin/install -c attr getfattr setfattr '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin' [ 56s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 56s] libtool: install: /bin/install -c .libs/attr /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin/attr [ 57s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 57s] libtool: install: /bin/install -c .libs/getfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin/getfattr [ 57s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 57s] libtool: install: /bin/install -c .libs/setfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin/setfattr [ 57s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/etc' [ 57s] /bin/install -c -m 644 xattr.conf '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/etc' [ 57s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/attributes.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/include/attr" [ 57s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/error_context.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/include/attr" [ 57s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/libattr.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/include/attr" [ 57s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/doc/attr' [ 57s] /bin/install -c -m 644 doc/CHANGES doc/COPYING doc/COPYING.LGPL doc/PORTING '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/doc/attr' [ 57s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/man/man1' [ 57s] /bin/install -c -m 644 man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/man/man1' [ 57s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/man/man3' [ 57s] /bin/install -c -m 644 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3 '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/man/man3' [ 57s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib/pkgconfig' [ 57s] /bin/install -c -m 644 libattr.pc '/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib/pkgconfig' [ 57s] /bin/make install-data-hook [ 57s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 57s] set -e; \ [ 57s] cd "/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/man"; \ [ 57s] for d in man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3; do \ [ 57s] man_section=${d##*.}; \ [ 57s] d=${d#man/}; \ [ 57s] dst=${d##*/}; \ [ 57s] for m in `gawk \ [ 57s] '/^\.S[h|H] NAME/ {ok=1; next} ok {print; exit}' $d \ [ 57s] | /bin/sed \ [ 57s] -e 's/^\.Nm //' -e 's/,/ /g' -e 's/\\-.*//' \ [ 57s] -e 's/\\\f[0-9]//g' -e 's/ / /g;q'`; \ [ 57s] do \ [ 57s] [ "$m" = "\\" ] && continue; \ [ 57s] ln="man$man_section/$m.$man_section"; \ [ 57s] [ -e "$ln" ] && continue; \ [ 57s] echo ln -s $dst $ln; \ [ 57s] ln -s $dst $ln; \ [ 57s] done; \ [ 57s] done; \ [ 57s] rmdir */ 2>/dev/null || : [ 57s] ln -s attr_get.3 man3/attr_getf.3 [ 57s] ln -s attr_list.3 man3/attr_listf.3 [ 57s] ln -s attr_multi.3 man3/attr_multif.3 [ 57s] ln -s attr_remove.3 man3/attr_removef.3 [ 57s] ln -s attr_set.3 man3/attr_setf.3 [ 57s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 57s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 57s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.4.48' [ 57s] + rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/info/dir [ 57s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm -regex '.*\.la$' [ 57s] + xargs rm -f -- [ 57s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm -regex '.*\.a$' [ 57s] + xargs rm -f -- [ 57s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm -type f -name '*.la' -delete -print [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm//usr/share/doc/attr [ 57s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm attr [ 57s] find: `/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/help/': No such file or directory [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/info [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/doc/packages [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/doc/attr [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/doc/attr-2.4.48 [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/gtk-doc [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/doc [ 57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/man [ 57s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm -regex '.*/man/man./.*.[0-9]' [ 57s] + xargs rm -f -- [ 57s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm -regex '.*/man/../man./.*.[0-9]' [ 57s] + xargs rm -f -- [ 57s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm -regex '.*/man/man./.*.[0-9]pm' [ 57s] + xargs rm -f -- [ 57s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/attr-2.4.48 [ 57s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin/attr [ 57s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin/getfattr [ 58s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/bin/setfattr [ 59s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/lib/libattr.so.1.1.2448 [ 59s] 161 blocks [ 59s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.4.48/attr-debuginfo.manifest [ 59s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.4.48/attr-debugsource.manifest [ 59s] + /usr/lib/rpm/check-buildroot [ 59s] + /usr/lib/rpm//brp-compress [ 59s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 59s] + /usr/lib/rpm/brp-python-hardlink [ 59s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm [ 59s] Processing files: attr-2.4.48-4.30.armv7l [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.g90m2s [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd attr-2.4.48 [ 59s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/licenses/attr [ 59s] + export LICENSEDIR [ 59s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/licenses/attr [ 59s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/licenses/attr [ 59s] + exit 0 [ 59s] Provides: attr = 2.4.48-4.30 attr(armv7l-32) = 2.4.48-4.30 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.2) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 59s] Processing files: attr-debugsource-2.4.48-4.30.armv7l [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Provides: attr-debugsource = 2.4.48-4.30 attr-debugsource(armv7l-32) = 2.4.48-4.30 [ 59s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 59s] Processing files: libattr-2.4.48-4.30.armv7l [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.2TDjes [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd attr-2.4.48 [ 59s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/licenses/libattr [ 59s] + export LICENSEDIR [ 59s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/licenses/libattr [ 59s] + cp -pr doc/COPYING.LGPL /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm/usr/share/licenses/libattr [ 59s] + exit 0 [ 59s] Provides: config(libattr) = 2.4.48-4.30 libattr = 2.4.48-4.30 libattr(armv7l-32) = 2.4.48-4.30 libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.1) libattr.so.1(ATTR_1.2) libattr.so.1(ATTR_1.3) [ 59s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires(post): /sbin/ldconfig [ 59s] Requires(postun): /sbin/ldconfig [ 59s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 59s] Processing files: libattr-devel-2.4.48-4.30.armv7l [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 60s] Provides: attr-devel libattr-devel = 2.4.48-4.30 libattr-devel(armv7l-32) = 2.4.48-4.30 pkgconfig(libattr) = 2.4.48 [ 60s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 60s] Requires: /usr/bin/pkg-config libattr.so.1 [ 60s] Obsoletes: attr-devel [ 60s] Processing files: attr-debuginfo-2.4.48-4.30.armv7l [ 60s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 60s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 60s] [ 60s] warning: File listed twice: /usr/lib/debug/.build-id [ 60s] warning: File listed twice: /usr/lib/debug/.build-id [ 60s] Provides: attr-debuginfo = 2.4.48-4.30 attr-debuginfo(armv7l-32) = 2.4.48-4.30 [ 60s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 60s] Processing files: libattr-debuginfo-2.4.48-4.30.armv7l [ 60s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 60s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 60s] [ 60s] Provides: libattr-debuginfo = 2.4.48-4.30 libattr-debuginfo(armv7l-32) = 2.4.48-4.30 [ 60s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 60s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm [ 60s] warning: Could not canonicalize hostname: obsnw13 [ 60s] Wrote: /home/abuild/rpmbuild/SRPMS/attr-2.4.48-4.30.src.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-2.4.48-4.30.armv7l.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-debugsource-2.4.48-4.30.armv7l.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-2.4.48-4.30.armv7l.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-devel-2.4.48-4.30.armv7l.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-debuginfo-2.4.48-4.30.armv7l.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-debuginfo-2.4.48-4.30.armv7l.rpm [ 60s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.br6t5r [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd attr-2.4.48 [ 60s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.4.48-4.30.arm [ 60s] + exit 0 [ 60s] ... checking for files with abuild user/group [ 60s] ... creating baselibs [ 61s] no targets for arch armv7l, nothing to do [ 61s] [ 61s] obsnw13 finished "build attr.spec" at Wed Dec 30 13:50:42 UTC 2020. [ 61s]