[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw05 started "build _service:gbs:pcre.spec" at Mon Mar 8 01:18:39 UTC 2021. [ 0s] [ 0s] Building pcre for project 'Tizen:Base:Tool' repository 'standard' arch 'armv7l' srcmd5 'd00f06ef82f4f08068604768be3a0ef2' [ 0s] [ 0s] processing recipe /var/cache/build/root_2/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_2/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_2/.build.rpmlist /var/cache/build/root_2/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 0s] copying qemu [ 0s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 0s] [ 0s] registering binfmt handlers for cross build [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /var/run/obs/worker/2/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 0s] [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] /usr/lib/build/qemu-reg: No such file or directory [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/41] preinstalling libmagic-data... [ 0s] [2/41] preinstalling libncurses... [ 0s] [3/41] preinstalling setup... [ 0s] [4/41] preinstalling filesystem... [ 0s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libzstd1... [ 1s] [8/41] preinstalling bash... [ 1s] [9/41] preinstalling diffutils... [ 1s] [10/41] preinstalling grep... [ 1s] [11/41] preinstalling libattr... [ 1s] [12/41] preinstalling libblkid... [ 1s] [13/41] preinstalling libbz2... [ 1s] [14/41] preinstalling libcap... [ 1s] [15/41] preinstalling libfreebl3... [ 1s] [16/41] preinstalling liblua... [ 1s] [17/41] preinstalling liblzma... [ 1s] [18/41] preinstalling libpopt... [ 1s] [19/41] preinstalling libreadline... [ 1s] [20/41] preinstalling libsmack... [ 1s] [21/41] preinstalling libsqlite... [ 1s] [22/41] preinstalling libuuid... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 7s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 7s] [28/41] preinstalling coreutils... [ 7s] [29/41] preinstalling libacl... [ 7s] [30/41] preinstalling libelf... [ 7s] [31/41] preinstalling libmount... [ 7s] [32/41] preinstalling smack... [ 8s] [33/41] preinstalling bzip2... [ 8s] [34/41] preinstalling libmagic... [ 8s] [35/41] preinstalling libxml2... [ 8s] [36/41] preinstalling tar... [ 8s] [37/41] preinstalling util-linux... [ 8s] [38/41] preinstalling util-linux-su... [ 8s] [39/41] preinstalling nss... [ 8s] [40/41] preinstalling libsoftokn3... [ 8s] [41/41] preinstalling rpm... [ 8s] [ 8s] running qemu-linux-user-x86_64-cross postinstall script [ 8s] running qemu-accel-x86_64-armv7l postinstall script [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 9s] [1/96] installing libmagic-data-5.39-4.98 [ 10s] [2/96] installing setup-0.9-4.27 [ 10s] warning: /etc/profile created as /etc/profile.rpmnew [ 10s] [3/96] installing filesystem-3.1-3.3 [ 10s] [4/96] installing glibc-2.30-6.16 [ 10s] [5/96] installing libatomic-9.2.0-8.15 [ 11s] [6/96] installing libgcc-9.2.0-8.15 [ 11s] [7/96] installing libzstd1-1.4.5-1.71 [ 11s] [8/96] installing bash-3.2.57-4.4 [ 11s] [9/96] installing cpio-2.8-5.2 [ 11s] [10/96] installing diffutils-3.3-4.2 [ 11s] [11/96] installing findutils-4.3.8-3.169 [ 11s] [12/96] installing gdbm-1.8.3-3.192 [ 12s] [13/96] installing hostname-3.23-3.2 [ 12s] [14/96] installing libattr-2.4.48-4.115 [ 12s] [15/96] installing libblkid-2.36-7.19 [ 12s] [16/96] installing libbz2-1.0.8-4.131 [ 13s] [17/96] installing libcap-2.24-3.177 [ 13s] [18/96] installing libext2fs-1.46.0-4.5 [ 13s] [19/96] installing libfreebl3-3.34.1-3.138 [ 14s] [20/96] installing libgfortran-9.2.0-8.15 [ 14s] [21/96] installing libgomp-9.2.0-8.15 [ 14s] [22/96] installing libitm-9.2.0-8.15 [ 15s] [23/96] installing libltdl-2.4.2-3.140 [ 15s] [24/96] installing liblua-5.1.5-3.129 [ 15s] [25/96] installing liblzma-5.2.5-4.56 [ 16s] [26/96] installing libopenssl11-1.1.1i-4.20 [ 16s] [27/96] installing libpcre-8.44-4.17 [ 17s] [28/96] installing libpopt-1.16-3.176 [ 17s] [29/96] installing libsmack-1.3.1-3.172 [ 17s] [30/96] installing libsmartcols-2.36-7.19 [ 18s] [31/96] installing libsqlite-3.33.0-4.100 [ 18s] [32/96] installing libstdc++-9.2.0-8.15 [ 18s] [33/96] installing libuuid-2.36-7.19 [ 19s] [34/96] installing m4-1.4.17-3.2 [ 19s] [35/96] installing net-tools-2.0_20121208git-4.3 [ 19s] [36/96] installing nspr-4.12-3.176 [ 19s] [37/96] installing patch-2.7-5.1 [ 19s] [38/96] installing pkg-config-0.28-3.168 [ 19s] [39/96] installing sed-4.1c-3.3 [ 19s] [40/96] installing update-alternatives-1.20.5-3.3 [ 19s] [41/96] installing which-2.17-4.3 [ 19s] [42/96] installing zlib-1.2.11-3.180 [ 20s] [43/96] installing build-compare-2015.04.28-3.66 [ 20s] [44/96] installing libstdc++-devel-9.2.0-8.15 [ 20s] [45/96] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 21s] [46/96] installing terminfo-base-full-6.2-5.90 [ 22s] [47/96] installing cpp-9.2.0-8.15 [ 22s] [48/96] installing gcc-c++-9.2.0-8.15 [ 23s] [49/96] installing binutils-2.33.1-7.76 [ 24s] [50/96] installing coreutils-6.9-4.48 [ 24s] [51/96] installing gawk-3.1.5-4.3 [ 24s] [52/96] installing grep-2.5.2-3.3 [ 24s] [53/96] installing libacl-2.2.53-4.115 [ 24s] [54/96] installing libcc1-9.2.0-8.15 [ 25s] [55/96] installing libelf-0.178-3.92 [ 25s] [56/96] installing libmount-2.36-7.19 [ 25s] [57/96] installing libubsan-9.2.0-8.15 [ 26s] [58/96] installing make-4.0-2.46 [ 26s] [59/96] installing nss-certs-3.34.1-3.138 [ 26s] [60/96] installing smack-1.3.1-3.172 [ 26s] [61/96] installing bzip2-1.0.8-4.131 [ 26s] [62/96] installing libfdisk-2.36-7.19 [ 26s] [63/96] installing libmagic-5.39-4.98 [ 27s] [64/96] installing libxml2-2.9.10-4.13 [ 27s] [65/96] installing perl-5.32.0-4.48 [ 29s] [66/96] installing xz-5.2.5-4.56 [ 29s] [67/96] installing build-mkbaselibs-20120927-3.3 [ 29s] [68/96] installing linux-glibc-devel-3.10-4.19 [ 30s] [69/96] installing autoconf-2.69-3.107 [ 30s] [70/96] installing file-5.39-4.98 [ 30s] [71/96] installing glibc-locale-2.30-6.16 [ 31s] [72/96] installing tar-1.17-2.5 [ 31s] [73/96] installing gzip-1.3.12-3.177 [ 31s] [74/96] installing libncurses6-6.2-5.90 [ 31s] [75/96] installing pam-1.1.6-3.3 [ 32s] [76/96] installing tzdata-2020a-3.3 [ 32s] [77/96] installing libdw-0.178-3.92 [ 33s] [78/96] installing libarchive-3.5.1-2.17 [ 33s] [79/96] installing gcc-9.2.0-8.15 [ 34s] [80/96] installing libncurses-6.2-5.90 [ 34s] [81/96] installing glibc-devel-2.30-6.16 [ 34s] [82/96] installing qemu-accel-x86_64-armv7l-0.4-5.9 [ 42s] [83/96] installing automake-1.15.1-3.125 [ 42s] [84/96] installing less-466-3.3 [ 42s] [85/96] installing libreadline-5.2-3.47 [ 42s] [86/96] installing procps-ng-3.3.16-3.3 [ 43s] [87/96] installing libasm-0.178-3.92 [ 43s] [88/96] installing build-20120927-3.3 [ 43s] [89/96] installing libtool-2.4.2-3.140 [ 43s] [90/96] installing elfutils-0.178-3.92 [ 43s] [91/96] installing util-linux-2.36-7.19 [ 43s] [92/96] installing util-linux-su-2.36-7.19 [ 43s] [93/96] installing nss-3.34.1-3.138 [ 44s] [94/96] installing libsoftokn3-3.34.1-3.138 [ 44s] [95/96] installing rpm-4.14.1.1-7.6 [ 44s] [96/96] installing rpm-build-4.14.1.1-7.6 [ 45s] removing nis flags from /var/cache/build/root_2/etc/nsswitch.conf... [ 45s] now finalizing build dir... [ 45s] Running build time source services... [ 45s] build target is armv7l-tizen-linux [ 45s] ----------------------------------------------------------------- [ 45s] I have the following modifications for pcre.spec: [ 45s] 5c5 [ 45s] < Release: 0 [ 45s] --- [ 45s] > Release: 4.18 [ 45s] ----------------------------------------------------------------- [ 45s] ----- building pcre.spec (user abuild) [ 45s] ----------------------------------------------------------------- [ 45s] ----------------------------------------------------------------- [ 45s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base:Tool/standard/d00f06ef82f4f08068604768be3a0ef2-pcre' -ba /home/abuild/rpmbuild/SOURCES/pcre.spec [ 45s] Building target platforms: armv7l-tizen-linux [ 45s] Building for target armv7l-tizen-linux [ 45s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.eYXJFZ [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + rm -rf pcre-8.44 [ 45s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.44.tar.bz2 [ 45s] + /bin/tar -xof - [ 46s] + STATUS=0 [ 46s] + '[' 0 -ne 0 ']' [ 46s] + cd pcre-8.44 [ 46s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 46s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 46s] + /bin/patch -p1 [ 46s] patching file Makefile.am [ 46s] + exit 0 [ 46s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Df2WjY [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd pcre-8.44 [ 46s] ++ uname -m [ 46s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + LDFLAGS= [ 46s] + export LDFLAGS [ 46s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 46s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 46s] + autoreconf -fiv [ 49s] autoreconf: Entering directory `.' [ 49s] autoreconf: configure.ac: not using Gettext [ 50s] autoreconf: running: aclocal --force -I m4 [ 60s] autoreconf: configure.ac: tracing [ 61s] autoreconf: running: libtoolize --copy --force [ 61s] libtoolize: putting auxiliary files in `.'. [ 61s] libtoolize: copying file `./ltmain.sh' [ 61s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 61s] libtoolize: copying file `m4/libtool.m4' [ 62s] libtoolize: copying file `m4/ltoptions.m4' [ 62s] libtoolize: copying file `m4/ltsugar.m4' [ 62s] libtoolize: copying file `m4/ltversion.m4' [ 62s] libtoolize: copying file `m4/lt~obsolete.m4' [ 72s] autoreconf: running: /usr/bin/autoconf --force [ 76s] autoreconf: running: /usr/bin/autoheader --force [ 78s] autoreconf: running: automake --add-missing --copy --force-missing [ 84s] autoreconf: Leaving directory `.' [ 85s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 85s] checking for a BSD-compatible install... /bin/install -c [ 85s] checking whether build environment is sane... yes [ 85s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 85s] checking for gawk... gawk [ 85s] checking whether make sets $(MAKE)... yes [ 85s] checking whether make supports nested variables... yes [ 85s] checking whether make supports nested variables... (cached) yes [ 85s] checking for style of include used by make... GNU [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 85s] checking whether the C compiler works... yes [ 85s] checking for C compiler default output file name... a.out [ 85s] checking for suffix of executables... [ 85s] checking whether we are cross compiling... no [ 85s] checking for suffix of object files... o [ 85s] checking whether we are using the GNU C compiler... yes [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 85s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 85s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 85s] checking for armv7l-tizen-linux-gnueabi-link... no [ 85s] checking for ar... ar [ 85s] checking the archiver (ar) interface... ar [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 85s] checking whether we are using the GNU C compiler... (cached) yes [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 85s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 85s] checking whether we are using the GNU C++ compiler... yes [ 85s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 85s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 85s] checking for grep that handles long lines and -e... /bin/grep [ 85s] checking for egrep... /bin/grep -E [ 86s] checking for ANSI C header files... yes [ 86s] checking for sys/types.h... yes [ 86s] checking for sys/stat.h... yes [ 86s] checking for stdlib.h... yes [ 86s] checking for string.h... yes [ 86s] checking for memory.h... yes [ 86s] checking for strings.h... yes [ 86s] checking for inttypes.h... yes [ 86s] checking for stdint.h... yes [ 86s] checking for unistd.h... yes [ 86s] checking for int64_t... yes [ 86s] checking build system type... armv7l-tizen-linux-gnueabi [ 86s] checking host system type... armv7l-tizen-linux-gnueabi [ 86s] checking how to print strings... printf [ 86s] checking for a sed that does not truncate output... /bin/sed [ 86s] checking for fgrep... /bin/grep -F [ 86s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 86s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 86s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 86s] checking the name lister (/bin/nm -B) interface... BSD nm [ 86s] checking whether ln -s works... yes [ 86s] checking the maximum length of command line arguments... 1572864 [ 86s] checking whether the shell understands some XSI constructs... yes [ 86s] checking whether the shell understands "+="... yes [ 86s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 86s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 86s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 86s] checking for armv7l-tizen-linux-gnueabi-objdump... objdump [ 86s] checking how to recognize dependent libraries... pass_all [ 86s] checking for armv7l-tizen-linux-gnueabi-dlltool... dlltool [ 86s] checking how to associate runtime and link libraries... printf %s\n [ 86s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 86s] checking for archiver @FILE support... @ [ 86s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 86s] checking for strip... strip [ 86s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 86s] checking for ranlib... ranlib [ 86s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 86s] checking for sysroot... no [ 86s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 86s] checking for mt... no [ 86s] checking if : is a manifest tool... no [ 86s] checking for dlfcn.h... yes [ 86s] checking for objdir... .libs [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking whether -lc should be explicitly linked in... no [ 87s] checking dynamic linker characteristics... GNU/Linux ld.so [ 87s] checking how to hardcode library paths into programs... immediate [ 87s] checking whether stripping libraries is possible... yes [ 87s] checking if libtool supports shared libraries... yes [ 87s] checking whether to build shared libraries... yes [ 87s] checking whether to build static libraries... yes [ 87s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 87s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 87s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 87s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 87s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 87s] checking how to hardcode library paths into programs... immediate [ 87s] checking whether ln -s works... yes [ 87s] checking whether the -Werror option is usable... yes [ 87s] checking for simple visibility declarations... yes [ 87s] checking for ANSI C header files... (cached) yes [ 87s] checking limits.h usability... yes [ 87s] checking limits.h presence... yes [ 87s] checking for limits.h... yes [ 87s] checking for sys/types.h... (cached) yes [ 87s] checking for sys/stat.h... (cached) yes [ 87s] checking dirent.h usability... yes [ 87s] checking dirent.h presence... yes [ 87s] checking for dirent.h... yes [ 87s] checking windows.h usability... no [ 87s] checking windows.h presence... no [ 87s] checking for windows.h... no [ 87s] checking for alias support in the linker... no [ 87s] checking for alias support in the linker... no [ 87s] checking string usability... yes [ 88s] checking string presence... yes [ 88s] checking for string... yes [ 88s] checking bits/type_traits.h usability... no [ 88s] checking bits/type_traits.h presence... no [ 88s] checking for bits/type_traits.h... no [ 88s] checking type_traits.h usability... no [ 88s] checking type_traits.h presence... no [ 88s] checking for type_traits.h... no [ 88s] checking for strtoq... yes [ 88s] checking for long long... yes [ 88s] checking for unsigned long long... yes [ 88s] checking for an ANSI C-conforming const... yes [ 88s] checking for size_t... yes [ 88s] checking for bcopy... yes [ 88s] checking for memmove... yes [ 88s] checking for strerror... yes [ 88s] checking zlib.h usability... no [ 88s] checking zlib.h presence... no [ 88s] checking for zlib.h... no [ 88s] checking for gzopen in -lz... no [ 88s] checking bzlib.h usability... no [ 88s] checking bzlib.h presence... no [ 88s] checking for bzlib.h... no [ 88s] checking for libbz2... no [ 88s] checking for the pthreads library -lpthreads... no [ 88s] checking whether pthreads work without any flags... no [ 88s] checking whether pthreads work with -Kthread... no [ 88s] checking whether pthreads work with -kthread... no [ 89s] checking for the pthreads library -llthread... no [ 89s] checking whether pthreads work with -pthread... yes [ 89s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 89s] checking if more special flags are required for pthreads... no [ 89s] checking for PTHREAD_PRIO_INHERIT... yes [ 89s] checking that generated files are newer than configure... done [ 89s] configure: creating ./config.status [ 89s] config.status: creating Makefile [ 89s] config.status: creating libpcre.pc [ 89s] config.status: creating libpcre16.pc [ 89s] config.status: creating libpcre32.pc [ 89s] config.status: creating libpcreposix.pc [ 89s] config.status: creating libpcrecpp.pc [ 89s] config.status: creating pcre-config [ 90s] config.status: creating pcre.h [ 90s] config.status: creating pcre_stringpiece.h [ 90s] config.status: creating pcrecpparg.h [ 90s] config.status: creating config.h [ 90s] config.status: executing depfiles commands [ 91s] config.status: executing libtool commands [ 91s] config.status: executing script-chmod commands [ 91s] config.status: executing delete-old-chartables commands [ 91s] [ 91s] pcre-8.44 configuration summary: [ 91s] [ 91s] Install prefix .................. : /usr [ 91s] C preprocessor .................. : armv7l-tizen-linux-gnueabi-gcc -E [ 91s] C compiler ...................... : armv7l-tizen-linux-gnueabi-gcc [ 91s] C++ preprocessor ................ : armv7l-tizen-linux-gnueabi-g++ -E [ 91s] C++ compiler .................... : armv7l-tizen-linux-gnueabi-g++ [ 91s] Linker .......................... : /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 91s] C preprocessor flags ............ : [ 91s] C compiler flags ................ : -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -fvisibility=hidden [ 91s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -fvisibility-inlines-hidden [ 91s] Linker flags .................... : [ 91s] Extra libraries ................. : [ 91s] [ 91s] Build 8 bit pcre library ........ : yes [ 91s] Build 16 bit pcre library ....... : no [ 91s] Build 32 bit pcre library ....... : no [ 91s] Build C++ library ............... : yes [ 91s] Enable JIT compiling support .... : yes [ 91s] Enable UTF-8/16/32 support ...... : yes [ 91s] Unicode properties .............. : yes [ 91s] Newline char/sequence ........... : lf [ 91s] \R matches only ANYCRLF ......... : no [ 91s] EBCDIC coding ................... : no [ 91s] EBCDIC code for NL .............. : n/a [ 91s] Rebuild char tables ............. : no [ 91s] Use stack recursion ............. : yes [ 91s] POSIX mem threshold ............. : 10 [ 91s] Internal link size .............. : 2 [ 91s] Nested parentheses limit ........ : 250 [ 91s] Match limit ..................... : 10000000 [ 91s] Match limit recursion ........... : MATCH_LIMIT [ 91s] Build shared libs ............... : yes [ 91s] Build static libs ............... : yes [ 91s] Use JIT in pcregrep ............. : yes [ 91s] Buffer size for pcregrep ........ : 20480 [ 91s] Link pcregrep with libz ......... : no [ 91s] Link pcregrep with libbz2 ....... : no [ 91s] Link pcretest with libedit ...... : no [ 91s] Link pcretest with libreadline .. : no [ 91s] Valgrind support ................ : no [ 91s] Code coverage ................... : no [ 91s] [ 91s] + make -j8 [ 91s] rm -f pcre_chartables.c [ 91s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 91s] make all-am [ 91s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 91s] CC libpcre_la-pcre_byte_order.lo [ 91s] CC libpcre_la-pcre_compile.lo [ 91s] CC libpcre_la-pcre_config.lo [ 91s] CC libpcre_la-pcre_exec.lo [ 91s] CC libpcre_la-pcre_dfa_exec.lo [ 91s] CC libpcre_la-pcre_fullinfo.lo [ 91s] CC libpcre_la-pcre_get.lo [ 91s] CC libpcre_la-pcre_globals.lo [ 91s] CC libpcre_la-pcre_jit_compile.lo [ 91s] CC libpcre_la-pcre_maketables.lo [ 92s] CC libpcre_la-pcre_newline.lo [ 92s] CC libpcre_la-pcre_ord2utf8.lo [ 92s] CC libpcre_la-pcre_refcount.lo [ 92s] CC libpcre_la-pcre_string_utils.lo [ 92s] CC libpcre_la-pcre_study.lo [ 92s] CC libpcre_la-pcre_tables.lo [ 92s] CC libpcre_la-pcre_ucd.lo [ 92s] CC libpcre_la-pcre_valid_utf8.lo [ 92s] CC libpcre_la-pcre_version.lo [ 92s] CC libpcre_la-pcre_xclass.lo [ 92s] CC libpcre_la-pcre_chartables.lo [ 92s] CC libpcreposix_la-pcreposix.lo [ 92s] CXX libpcrecpp_la-pcrecpp.lo [ 92s] CXX libpcrecpp_la-pcre_scanner.lo [ 92s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 92s] CC pcretest-pcretest.o [ 93s] CC pcretest-pcre_printint.o [ 94s] CC pcregrep-pcregrep.o [ 94s] CC pcre_jit_test-pcre_jit_test.o [ 94s] CXX pcrecpp_unittest-pcrecpp_unittest.o [ 94s] CXX pcre_scanner_unittest-pcre_scanner_unittest.o [ 94s] CXX pcre_stringpiece_unittest-pcre_stringpiece_unittest.o [ 104s] CCLD libpcre.la [ 104s] CCLD libpcreposix.la [ 104s] CXXLD libpcrecpp.la [ 104s] CCLD pcre_jit_test [ 104s] CCLD pcretest [ 104s] CCLD pcregrep [ 105s] CXXLD pcrecpp_unittest [ 105s] CXXLD pcre_scanner_unittest [ 105s] CXXLD pcre_stringpiece_unittest [ 105s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 105s] + exit 0 [ 105s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vsIgQY [ 105s] + umask 022 [ 105s] + cd /home/abuild/rpmbuild/BUILD [ 105s] + cd pcre-8.44 [ 105s] + LANG=C [ 105s] + export LANG [ 105s] + unset DISPLAY [ 105s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm [ 105s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm [ 105s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm install [ 105s] /bin/make install-am [ 105s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 105s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 105s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib' [ 105s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib' [ 105s] libtool: install: /bin/install -c .libs/libpcre.so.1.2.12 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcre.so.1.2.12 [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib && { ln -s -f libpcre.so.1.2.12 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.2.12 libpcre.so.1; }; }) [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib && { ln -s -f libpcre.so.1.2.12 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.2.12 libpcre.so; }; }) [ 105s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcre.la [ 105s] libtool: install: warning: relinking `libpcreposix.la' [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.44; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.44/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fvisibility=hidden -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -version-info 0:7:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm) [ 105s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.7T /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcreposix.so.0.0.7 [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.7 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.7 libpcreposix.so.0; }; }) [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.7 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.7 libpcreposix.so; }; }) [ 105s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcreposix.la [ 105s] libtool: install: warning: relinking `libpcrecpp.la' [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.44; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.44/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:2:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm) [ 105s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.2T /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcrecpp.so.0.0.2 [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.2 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.2 libpcrecpp.so.0; }; }) [ 105s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.2 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.2 libpcrecpp.so; }; }) [ 105s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcrecpp.la [ 105s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcre.a [ 105s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcre.a [ 105s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcre.a [ 105s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcreposix.a [ 105s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcreposix.a [ 105s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcreposix.a [ 105s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcrecpp.a [ 105s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcrecpp.a [ 105s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcrecpp.a [ 105s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 105s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin' [ 105s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin' [ 105s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 105s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 105s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.44/libpcre.la' has not been installed in `/usr/lib' [ 105s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin/pcretest [ 105s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 105s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 105s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.44/libpcre.la' has not been installed in `/usr/lib' [ 105s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin/pcregrep [ 105s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin' [ 105s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin' [ 105s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre' [ 105s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre' [ 105s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre/html' [ 105s] /bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre-config.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre32.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_exec.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_utf32_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre/html' [ 106s] /bin/install -c -m 644 doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre/html' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre/html' [ 106s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre/html' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/include' [ 106s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/include' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man1' [ 106s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man1' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3' [ 106s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre32.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_exec.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_utf32_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcredemo.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3' [ 106s] /bin/install -c -m 644 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/include' [ 106s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/include' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/pkgconfig' [ 106s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/pkgconfig' [ 106s] /bin/make install-data-hook [ 106s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 106s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 106s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_compile.3 [ 106s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_compile2.3 [ 106s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_config.3 [ 106s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 106s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 106s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 106s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_exec.3 [ 106s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_free_study.3 [ 106s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_free_substring.3 [ 106s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 106s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 106s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 106s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 106s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 106s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_get_substring.3 [ 106s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 106s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_jit_exec.3 [ 106s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 106s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 106s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_maketables.3 [ 106s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 106s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_refcount.3 [ 106s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_study.3 [ 106s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 106s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre16_version.3 [ 106s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_assign_jit_stack.3 [ 106s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_compile.3 [ 106s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_compile2.3 [ 106s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_config.3 [ 106s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_copy_named_substring.3 [ 106s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_copy_substring.3 [ 106s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_dfa_exec.3 [ 106s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_exec.3 [ 106s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_free_study.3 [ 106s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_free_substring.3 [ 106s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_free_substring_list.3 [ 106s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_fullinfo.3 [ 106s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_get_named_substring.3 [ 106s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_get_stringnumber.3 [ 106s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_get_stringtable_entries.3 [ 106s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_get_substring.3 [ 106s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_get_substring_list.3 [ 106s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_jit_exec.3 [ 106s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_jit_stack_alloc.3 [ 106s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_jit_stack_free.3 [ 106s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_maketables.3 [ 106s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_pattern_to_host_byte_order.3 [ 107s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_refcount.3 [ 107s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_study.3 [ 107s] ln -sf pcre_utf32_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_utf32_to_host_byte_order.3 [ 107s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/man/man3/pcre32_version.3 [ 107s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.44' [ 107s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/info/dir [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm -regex '.*\.la$' [ 107s] + xargs rm -f -- [ 107s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm//usr/share/doc/packages [ 107s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm//usr/share/doc/packages/pcre-doc [ 107s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/*.la' [ 107s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 8.44-4.18 --unique-debug-src-base pcre-8.44-4.18.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/pcre-8.44 [ 107s] 1+0 records in [ 107s] 1+0 records out [ 107s] 1+0 records in [ 107s] 1+0 records out [ 107s] 7 bytes (7 B) copied1+0 records in [ 107s] 1+0 records out [ 107s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000591341 s, 11.8 kB/s [ 107s] , 0.000601066 s, 11.6 kB/s [ 107s] , 0.000584747 s, 12.0 kB/s [ 107s] 1+0 records in [ 107s] 1+0 records out [ 107s] 1+0 records in [ 107s] 1+0 records out [ 107s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.00102057 s, 6.9 kB/s [ 107s] , 0.00102057 s, 6.9 kB/s [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin/pcregrep [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/bin/pcretest [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcre.so.1.2.12 [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcrecpp.so.0.0.2 [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/lib/libpcreposix.so.0.0.7 [ 107s] 0+0 records in [ 107s] 0+0 records out [ 107s] 0 bytes (0 B) copied0+0 records in [ 107s] 0+0 records out [ 107s] 0 bytes (0 B) copied, 0.000433212 s, 0.0 kB/s [ 107s] , 0.000427166 s, 0.0 kB/s [ 107s] 0+0 records in [ 107s] 0+0 records out [ 107s] 0 bytes (0 B) copied0+0 records in [ 107s] 0+0 records out [ 107s] 0 bytes (0 B) copied, 0.000430191 s, 0.0 kB/s [ 107s] , 0.000428855 s, 0.0 kB/s [ 107s] 0+0 records in [ 107s] 0+0 records out [ 107s] 0 bytes (0 B) copied, 0.000429971 s, 0.0 kB/s [ 107s] 4382 blocks [ 107s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.44/pcre-debuginfo.manifest [ 107s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.44/pcre-debugsource.manifest [ 107s] + /usr/lib/rpm/check-buildroot [ 107s] + /usr/lib/rpm//brp-compress [ 108s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 109s] + /usr/lib/rpm/brp-python-hardlink [ 109s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm [ 109s] Processing files: pcre-debugsource-8.44-4.18.armv7l [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 109s] Provides: pcre-debugsource = 8.44-4.18 pcre-debugsource(armv7l-32) = 8.44-4.18 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Processing files: pcre-devel-8.44-4.18.armv7l [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 110s] Provides: pcre-devel = 8.44-4.18 pcre-devel(armv7l-32) = 8.44-4.18 pkgconfig(libpcre) = 8.44 pkgconfig(libpcrecpp) = 8.44 pkgconfig(libpcreposix) = 8.44 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1 libpcrecpp.so.0 libpcreposix.so.0 pkgconfig(libpcre) [ 110s] Processing files: pcre-devel-static-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: pcre-devel-static = 8.44-4.18 pcre-devel-static(armv7l-32) = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Processing files: libpcre-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.iSxPkX [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd pcre-8.44 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcre [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcre [ 110s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcre [ 110s] + exit 0 [ 110s] Provides: libpcre = 8.44-4.18 libpcre(armv7l-32) = 8.44-4.18 libpcre.so.1 pcre = 8.44 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig [ 110s] Requires(postun): /sbin/ldconfig [ 110s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 110s] Obsoletes: pcre < 8.44 [ 110s] Processing files: libpcreposix-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.jTpe0Y [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd pcre-8.44 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcreposix [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcreposix [ 110s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcreposix [ 110s] + exit 0 [ 110s] Provides: libpcreposix = 8.44-4.18 libpcreposix(armv7l-32) = 8.44-4.18 libpcreposix.so.0 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig [ 110s] Requires(postun): /sbin/ldconfig [ 110s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 rtld(GNU_HASH) [ 110s] Processing files: libpcrecpp-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5qCXKZ [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd pcre-8.44 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcrecpp [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcrecpp [ 110s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/libpcrecpp [ 110s] + exit 0 [ 110s] Provides: libpcrecpp = 8.44-4.18 libpcrecpp(armv7l-32) = 8.44-4.18 libpcrecpp.so.0 [ 110s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires(post): /sbin/ldconfig [ 110s] Requires(postun): /sbin/ldconfig [ 110s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.8) libstdc++.so.6(CXXABI_1.3.9) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 110s] Processing files: pcre-doc-8.44-4.18.noarch [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.eqTXZX [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd pcre-8.44 [ 110s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export DOCDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/doc/packages/pcre-doc [ 110s] + exit 0 [ 110s] Provides: pcre-doc = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Processing files: pcre-tools-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.cPrrmZ [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd pcre-8.44 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/pcre-tools [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/pcre-tools [ 110s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm/usr/share/licenses/pcre-tools [ 110s] + exit 0 [ 110s] Provides: pcre-tools = 8.44-4.18 pcre-tools(armv7l-32) = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 110s] Processing files: libpcre-debuginfo-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: libpcre-debuginfo = 8.44-4.18 libpcre-debuginfo(armv7l-32) = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Recommends: pcre-debugsource(armv7l-32) = 8.44-4.18 [ 110s] Processing files: libpcreposix-debuginfo-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: libpcreposix-debuginfo = 8.44-4.18 libpcreposix-debuginfo(armv7l-32) = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Recommends: pcre-debugsource(armv7l-32) = 8.44-4.18 [ 110s] Processing files: libpcrecpp-debuginfo-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: libpcrecpp-debuginfo = 8.44-4.18 libpcrecpp-debuginfo(armv7l-32) = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Recommends: pcre-debugsource(armv7l-32) = 8.44-4.18 [ 110s] Processing files: pcre-tools-debuginfo-8.44-4.18.armv7l [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Provides: pcre-tools-debuginfo = 8.44-4.18 pcre-tools-debuginfo(armv7l-32) = 8.44-4.18 [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Recommends: pcre-debugsource(armv7l-32) = 8.44-4.18 [ 110s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm [ 110s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.44-4.18.src.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.44-4.18.armv7l.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.44-4.18.armv7l.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.44-4.18.armv7l.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.44-4.18.armv7l.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.44-4.18.armv7l.rpm [ 111s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.44-4.18.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.44-4.18.noarch.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.44-4.18.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.44-4.18.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.44-4.18.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.44-4.18.armv7l.rpm [ 113s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.44-4.18.armv7l.rpm [ 113s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DfYPnW [ 113s] + umask 022 [ 113s] + cd /home/abuild/rpmbuild/BUILD [ 113s] + cd pcre-8.44 [ 113s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.44-4.18.arm [ 113s] + exit 0 [ 113s] ... checking for files with abuild user/group [ 113s] ... creating baselibs [ 113s] no targets for arch armv7l, nothing to do [ 113s] ... comparing built packages with the former built [ 113s] /usr/lib/build/pkg-diff.sh [ 114s] compare /.build.oldpackages/pcre-8.44-4.17.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.44-4.18.src.rpm [ 114s] This is not a prerelease project. Compare the project name. [ 114s] comparing rpmtags [ 114s] comparing RELEASE [ 114s] comparing PROVIDES [ 114s] comparing scripts [ 114s] comparing filelist [ 114s] comparing file checksum [ 114s] RPM meta information is identical [ 114s] compare /.build.oldpackages/libpcre-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.44-4.18.armv7l.rpm [ 114s] Comparing libpcre-8.44-4.17.armv7l.rpm to libpcre-8.44-4.18.armv7l.rpm [ 114s] This is not a prerelease project. Compare the project name. [ 114s] comparing rpmtags [ 114s] comparing RELEASE [ 114s] comparing PROVIDES [ 114s] comparing scripts [ 114s] comparing filelist [ 114s] comparing file checksum [ 114s] creating rename script [ 114s] RPM file checksum differs. [ 114s] Extracting packages [ 115s] /usr/lib/libpcre.so.1.2.12: only difference was in build-id or gnu_debuglink, GOOD. [ 115s] Package content is identical [ 115s] compare /.build.oldpackages/libpcre-debuginfo-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.44-4.18.armv7l.rpm [ 115s] skipping -debuginfo package [ 115s] compare /.build.oldpackages/libpcrecpp-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.44-4.18.armv7l.rpm [ 115s] Comparing libpcrecpp-8.44-4.17.armv7l.rpm to libpcrecpp-8.44-4.18.armv7l.rpm [ 115s] This is not a prerelease project. Compare the project name. [ 115s] comparing rpmtags [ 116s] comparing RELEASE [ 116s] comparing PROVIDES [ 116s] comparing scripts [ 116s] comparing filelist [ 116s] comparing file checksum [ 116s] creating rename script [ 116s] RPM file checksum differs. [ 116s] Extracting packages [ 116s] /usr/lib/libpcrecpp.so.0.0.2: only difference was in build-id or gnu_debuglink, GOOD. [ 116s] Package content is identical [ 116s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.44-4.18.armv7l.rpm [ 116s] skipping -debuginfo package [ 116s] compare /.build.oldpackages/libpcreposix-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.44-4.18.armv7l.rpm [ 116s] Comparing libpcreposix-8.44-4.17.armv7l.rpm to libpcreposix-8.44-4.18.armv7l.rpm [ 116s] This is not a prerelease project. Compare the project name. [ 116s] comparing rpmtags [ 116s] comparing RELEASE [ 116s] comparing PROVIDES [ 116s] comparing scripts [ 116s] comparing filelist [ 116s] comparing file checksum [ 116s] creating rename script [ 116s] RPM file checksum differs. [ 116s] Extracting packages [ 117s] /usr/lib/libpcreposix.so.0.0.7: only difference was in build-id or gnu_debuglink, GOOD. [ 117s] Package content is identical [ 117s] compare /.build.oldpackages/libpcreposix-debuginfo-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.44-4.18.armv7l.rpm [ 117s] skipping -debuginfo package [ 117s] compare /.build.oldpackages/pcre-debugsource-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.44-4.18.armv7l.rpm [ 117s] Comparing pcre-debugsource-8.44-4.17.armv7l.rpm to pcre-debugsource-8.44-4.18.armv7l.rpm [ 117s] This is not a prerelease project. Compare the project name. [ 117s] comparing rpmtags [ 117s] comparing RELEASE [ 117s] comparing PROVIDES [ 117s] comparing scripts [ 117s] comparing filelist [ 117s] comparing file checksum [ 117s] creating rename script [ 117s] RPM meta information is identical [ 117s] compare /.build.oldpackages/pcre-devel-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.44-4.18.armv7l.rpm [ 117s] Comparing pcre-devel-8.44-4.17.armv7l.rpm to pcre-devel-8.44-4.18.armv7l.rpm [ 117s] This is not a prerelease project. Compare the project name. [ 117s] comparing rpmtags [ 117s] comparing RELEASE [ 117s] comparing PROVIDES [ 117s] comparing scripts [ 117s] comparing filelist [ 117s] comparing file checksum [ 117s] creating rename script [ 117s] RPM meta information is identical [ 117s] compare /.build.oldpackages/pcre-devel-static-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.44-4.18.armv7l.rpm [ 117s] Comparing pcre-devel-static-8.44-4.17.armv7l.rpm to pcre-devel-static-8.44-4.18.armv7l.rpm [ 117s] This is not a prerelease project. Compare the project name. [ 117s] comparing rpmtags [ 118s] comparing RELEASE [ 118s] comparing PROVIDES [ 118s] comparing scripts [ 118s] comparing filelist [ 118s] comparing file checksum [ 118s] creating rename script [ 118s] RPM file checksum differs. [ 118s] Extracting packages [ 118s] /usr/lib/libpcre_la-pcre_byte_order.o differs in ELF section .comment [ 118s] --- /tmp/tmp.NXzCP75084/tmp.igVxy75183 2021-03-08 01:20:37.363920216 +0000 [ 118s] +++ /tmp/tmp.NXzCP75084/tmp.ytLXx75185 2021-03-08 01:20:37.363920216 +0000 [ 118s] @@ -4,4 +4,4 @@ [ 118s] Contents of section .comment: [ 118s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 118s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 118s] - 0020 382e3429 20392e32 2e3000 8.4) 9.2.0. [ 118s] + 0020 382e3529 20392e32 2e3000 8.5) 9.2.0. [ 118s] compare /.build.oldpackages/pcre-doc-8.44-4.17.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.44-4.18.noarch.rpm [ 118s] Comparing pcre-doc-8.44-4.17.noarch.rpm to pcre-doc-8.44-4.18.noarch.rpm [ 118s] This is not a prerelease project. Compare the project name. [ 118s] comparing rpmtags [ 118s] comparing RELEASE [ 118s] comparing PROVIDES [ 118s] comparing scripts [ 118s] comparing filelist [ 118s] comparing file checksum [ 118s] creating rename script [ 118s] RPM meta information is identical [ 118s] compare /.build.oldpackages/pcre-tools-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.44-4.18.armv7l.rpm [ 118s] Comparing pcre-tools-8.44-4.17.armv7l.rpm to pcre-tools-8.44-4.18.armv7l.rpm [ 118s] This is not a prerelease project. Compare the project name. [ 118s] comparing rpmtags [ 118s] comparing RELEASE [ 119s] comparing PROVIDES [ 119s] comparing scripts [ 119s] comparing filelist [ 119s] comparing file checksum [ 119s] creating rename script [ 119s] RPM file checksum differs. [ 119s] Extracting packages [ 119s] /usr/bin/pcregrep: only difference was in build-id or gnu_debuglink, GOOD. [ 119s] /usr/bin/pcretest: only difference was in build-id or gnu_debuglink, GOOD. [ 119s] Package content is identical [ 119s] compare /.build.oldpackages/pcre-tools-debuginfo-8.44-4.17.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.44-4.18.armv7l.rpm [ 119s] skipping -debuginfo package [ 119s] [ 119s] obspw05 finished "build pcre.spec" at Mon Mar 8 01:20:38 UTC 2021. [ 119s]