[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obspw17 started "build _service:gbs:curl.spec" at Thu Mar 3 03:01:52 UTC 2022. [ 0s] [ 0s] Building curl for project 'Tizen:Base' repository 'standard' arch 'armv7hl' srcmd5 '1ab91628d4c4c8e5c14af8d8745baea3' [ 0s] [ 0s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:curl.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:curl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:curl.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 11s] [28/41] preinstalling coreutils... [ 11s] [29/41] preinstalling libacl... [ 11s] [30/41] preinstalling libelf... [ 11s] [31/41] preinstalling libmount... [ 11s] [32/41] preinstalling smack... [ 11s] [33/41] preinstalling bzip2... [ 11s] [34/41] preinstalling libmagic... [ 11s] [35/41] preinstalling libxml2... [ 11s] [36/41] preinstalling tar... [ 11s] [37/41] preinstalling util-linux... [ 11s] [38/41] preinstalling util-linux-su... [ 11s] [39/41] preinstalling nss... [ 11s] [40/41] preinstalling libsoftokn3... [ 12s] [41/41] preinstalling rpm... [ 12s] [ 12s] running qemu-linux-user-x86_64-cross postinstall script [ 12s] running qemu-accel-x86_64-armv7hl postinstall script [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 13s] reordering...cycle: libsoftokn3 -> nss [ 13s] breaking dependency nss -> libsoftokn3 [ 13s] done [ 13s] [1/107] installing boost-license-1.77.0-8.1 [ 13s] [2/107] installing libmagic-data-5.41-6.291 [ 13s] [3/107] installing setup-0.9-6.3 [ 13s] [4/107] installing filesystem-3.1-4.1 [ 13s] [5/107] installing glibc-2.30-13.70 [ 14s] [6/107] installing libatomic-9.2.0-15.59 [ 14s] [7/107] installing libgcc-9.2.0-15.59 [ 15s] [8/107] installing bash-3.2.57-5.1 [ 15s] [9/107] installing cpio-2.8-5.3 [ 15s] [10/107] installing diffutils-3.3-4.3 [ 15s] [11/107] installing findutils-4.3.8-5.358 [ 15s] [12/107] installing gdbm-1.8.3-3.658 [ 16s] [13/107] installing hostname-3.23-3.3 [ 16s] [14/107] installing libattr-2.5.1-5.349 [ 16s] [15/107] installing libblkid-2.37.4-11.1 [ 16s] [16/107] installing libbz2-1.0.8-5.221 [ 17s] [17/107] installing libcap-2.24-4.344 [ 17s] [18/107] installing libcares-1.18.1-8.1 [ 18s] [19/107] installing libext2fs-1.46.0-4.38 [ 18s] [20/107] installing libfreebl3-3.34.1-3.474 [ 18s] [21/107] installing libgfortran-9.2.0-15.59 [ 19s] [22/107] installing libgomp-9.2.0-15.59 [ 19s] [23/107] installing libitm-9.2.0-15.59 [ 20s] [24/107] installing libltdl-2.4.6-4.30 [ 20s] [25/107] installing liblua-5.1.5-3.327 [ 20s] [26/107] installing liblzma-5.2.5-5.289 [ 21s] [27/107] installing libopenssl11-1.1.1l-6.205 [ 21s] [28/107] installing libpcre-8.45-5.3 [ 21s] [29/107] installing libpopt-1.16-3.607 [ 22s] [30/107] installing libsmack-1.3.1-4.335 [ 22s] [31/107] installing libsmartcols-2.37.4-11.1 [ 23s] [32/107] installing libsqlite-3.37.2-5.21 [ 23s] [33/107] installing libstdc++-9.2.0-15.59 [ 23s] [34/107] installing libuuid-2.37.4-11.1 [ 24s] [35/107] installing libzstd1-1.4.5-2.186 [ 24s] [36/107] installing m4-1.4.19-4.1 [ 24s] [37/107] installing net-tools-2.0_20121208git-4.4 [ 24s] [38/107] installing nspr-4.12-3.600 [ 25s] [39/107] installing patch-2.7.6-7.97 [ 25s] [40/107] installing pkg-config-0.29.2-4.16 [ 25s] [41/107] installing sed-4.1c-4.2 [ 25s] [42/107] installing update-alternatives-1.20.5-3.4 [ 25s] [43/107] installing which-2.17-4.4 [ 25s] [44/107] installing zlib-1.2.11-3.637 [ 25s] [45/107] installing build-compare-2015.04.28-3.221 [ 26s] [46/107] installing libstdc++-devel-9.2.0-15.59 [ 26s] [47/107] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.7.1 [ 28s] [48/107] installing terminfo-base-full-6.2-7.267 [ 29s] [49/107] installing cpp-9.2.0-15.59 [ 30s] [50/107] installing gcc-c++-9.2.0-15.59 [ 31s] [51/107] installing binutils-2.33.1-9.239 [ 32s] [52/107] installing coreutils-6.9-5.122 [ 32s] [53/107] installing gawk-3.1.5-4.4 [ 32s] [54/107] installing grep-2.5.2-3.4 [ 32s] [55/107] installing libacl-2.2.53-4.562 [ 32s] [56/107] installing libcc1-9.2.0-15.59 [ 33s] [57/107] installing libelf-0.178-4.66 [ 33s] [58/107] installing libmount-2.37.4-11.1 [ 33s] [59/107] installing libubsan-9.2.0-15.59 [ 34s] [60/107] installing make-4.3-3.7 [ 34s] [61/107] installing nss-certs-3.34.1-3.474 [ 34s] [62/107] installing smack-1.3.1-4.335 [ 34s] [63/107] installing boost-system-1.77.0-8.1 [ 35s] [64/107] installing boost-thread-1.77.0-8.1 [ 35s] [65/107] installing bzip2-1.0.8-5.221 [ 35s] [66/107] installing libfdisk-2.37.4-11.1 [ 36s] [67/107] installing libicu-70.1-24.1 [ 38s] [68/107] installing libmagic-5.41-6.291 [ 38s] [69/107] installing libxml2-2.9.12-7.147 [ 39s] [70/107] installing perl-5.34.0-7.11 [ 41s] [71/107] installing xz-5.2.5-5.289 [ 41s] [72/107] installing build-mkbaselibs-20120927-3.3 [ 42s] [73/107] installing libicu-devel-70.1-24.1 [ 42s] [74/107] installing linux-glibc-devel-3.10-4.465 [ 43s] [75/107] installing autoconf-2.71-6.31 [ 43s] [76/107] installing file-5.41-6.291 [ 43s] [77/107] installing glibc-locale-2.30-13.70 [ 44s] [78/107] installing tar-1.17-3.3 [ 44s] [79/107] installing gzip-1.3.12-3.613 [ 44s] [80/107] installing libncurses6-6.2-7.267 [ 45s] [81/107] installing pam-1.1.6-4.2 [ 45s] [82/107] installing tzdata-2021e-5.1 [ 46s] [83/107] installing libdw-0.178-4.66 [ 46s] [84/107] installing nghttp2-1.46.0-17.1 [ 47s] [85/107] installing libarchive-3.5.2-3.94 [ 47s] [86/107] installing gcc-9.2.0-15.59 [ 48s] [87/107] installing libncurses-6.2-7.267 [ 48s] [88/107] installing glibc-devel-2.30-13.70 [ 48s] [89/107] installing nghttp2-devel-1.46.0-17.1 [ 49s] [90/107] installing qemu-accel-x86_64-armv7hl-0.4-9.16 [ 58s] [91/107] installing automake-1.16.4-6.28 [ 58s] [92/107] installing less-466-3.4 [ 58s] [93/107] installing libreadline-5.2-3.206 [ 59s] [94/107] installing procps-ng-3.3.17-4.1 [ 59s] [95/107] installing libasm-0.178-4.66 [ 59s] [96/107] installing build-20120927-3.3 [ 59s] [97/107] installing libcares-devel-1.18.1-8.1 [ 59s] [98/107] installing zlib-devel-1.2.11-3.637 [ 59s] [99/107] installing libtool-2.4.6-4.30 [ 59s] [100/107] installing elfutils-0.178-4.66 [ 60s] [101/107] installing util-linux-2.37.4-11.1 [ 60s] [102/107] installing libopenssl1.1-devel-1.1.1l-6.205 [ 60s] [103/107] installing util-linux-su-2.37.4-11.1 [ 60s] [104/107] installing nss-3.34.1-3.474 [ 60s] [105/107] installing libsoftokn3-3.34.1-3.474 [ 61s] [106/107] installing rpm-4.14.1.1-9.111 [ 62s] [107/107] installing rpm-build-4.14.1.1-9.111 [ 62s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 62s] now finalizing build dir... [ 62s] Running build time source services... [ 63s] build target is armv7hl-tizen-linux [ 63s] ----------------------------------------------------------------- [ 63s] I have the following modifications for curl.spec: [ 63s] 5c5 [ 63s] < Release: 0 [ 63s] --- [ 63s] > Release: 31.3 [ 63s] ----------------------------------------------------------------- [ 63s] ----- building curl.spec (user abuild) [ 63s] ----------------------------------------------------------------- [ 63s] ----------------------------------------------------------------- [ 64s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/1ab91628d4c4c8e5c14af8d8745baea3-curl' -ba /home/abuild/rpmbuild/SOURCES/curl.spec [ 64s] warning: Macro expanded in comment on line 9: %{name}-%{version}.tar.bz2 [ 64s] [ 64s] Building target platforms: armv7hl-tizen-linux [ 64s] Building for target armv7hl-tizen-linux [ 64s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.teICmD [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + rm -rf curl-7.81.0 [ 64s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/curl-7.81.0.tar.gz [ 64s] + /bin/tar -xof - [ 64s] + STATUS=0 [ 64s] + '[' 0 -ne 0 ']' [ 64s] + cd curl-7.81.0 [ 64s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 64s] + echo 'Patch #0 (58f7e70-to-eea1da0.diff):' [ 64s] Patch #0 (58f7e70-to-eea1da0.diff): [ 64s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 64s] patching file .gitattributes [ 64s] patching file .gitignore [ 64s] patching file .travis.yml [ 64s] patching file Makefile.am [ 64s] patching file configure.ac [ 64s] patching file extensions/Makefile.am [ 64s] patching file extensions/configure.ac [ 64s] patching file extensions/dlp.c [ 64s] patching file extensions/dlp.h [ 64s] patching file lib/Makefile.inc [ 64s] patching file lib/curl_config.h.in [ 64s] patching file lib/extensions/curl_extensions.c [ 64s] patching file lib/extensions/curl_extensions.h [ 64s] patching file lib/sendf.c [ 64s] patching file lib/url.c [ 64s] patching file lib/vtls/openssl.c [ 64s] + cp /home/abuild/rpmbuild/SOURCES/curl.manifest . [ 64s] + exit 0 [ 64s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.4p2i7F [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd curl-7.81.0 [ 64s] ++ uname -m [ 64s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 64s] + LANG=C [ 64s] + export LANG [ 64s] + unset DISPLAY [ 64s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 64s] + export CFLAGS [ 64s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 64s] + export CXXFLAGS [ 64s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 64s] + export FFLAGS [ 64s] + LDFLAGS= [ 64s] + export LDFLAGS [ 64s] + export 'CPPFLAGS=-DHAVE_PK11_CREATEGENERICOBJECT -DHAVE_GETIFADDRS' [ 64s] + CPPFLAGS='-DHAVE_PK11_CREATEGENERICOBJECT -DHAVE_GETIFADDRS' [ 64s] + CFLAGS+=' -fstack-protector-strong -Wl,-z,relro -D_FORTIFY_SOURCE=2 -fPIE -pie' [ 64s] + CFLAGS+=' -DHAVE_GETIFADDRS' [ 64s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fstack-protector-strong -Wl,-z,relro -D_FORTIFY_SOURCE=2 -fPIE -pie -DHAVE_GETIFADDRS' [ 64s] + export CFLAGS [ 64s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 64s] + export CXXFLAGS [ 64s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 64s] + export FFLAGS [ 64s] + autoreconf -v --install --force [ 66s] autoreconf: export WARNINGS= [ 66s] autoreconf: Entering directory '.' [ 66s] autoreconf: configure.ac: not using Gettext [ 67s] autoreconf: running: aclocal --force -I m4 [ 101s] autoreconf: configure.ac: tracing [ 106s] autoreconf: configure.ac: subdirectory ares not present [ 106s] autoreconf: running: libtoolize --copy --force [ 109s] libtoolize: putting auxiliary files in '.'. [ 109s] libtoolize: copying file './ltmain.sh' [ 109s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 109s] libtoolize: copying file 'm4/libtool.m4' [ 109s] libtoolize: copying file 'm4/ltoptions.m4' [ 110s] libtoolize: copying file 'm4/ltsugar.m4' [ 110s] libtoolize: copying file 'm4/ltversion.m4' [ 110s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 111s] libtoolize: Remember to add 'LT_INIT' to configure.ac. [ 111s] autoreconf: configure.ac: not using Intltool [ 111s] autoreconf: configure.ac: not using Gtkdoc [ 111s] autoreconf: running: aclocal --force -I m4 [ 148s] autoreconf: running: /usr/bin/autoconf --force [ 152s] configure.ac:2417: warning: The macro `AC_HELP_STRING' is obsolete. [ 152s] configure.ac:2417: You should run autoupdate. [ 152s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 152s] configure.ac:2417: the top level [ 152s] configure.ac:2418: warning: The macro `AC_HELP_STRING' is obsolete. [ 152s] configure.ac:2418: You should run autoupdate. [ 152s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 152s] configure.ac:2418: the top level [ 162s] autoreconf: running: /usr/bin/autoheader --force [ 168s] autoreconf: running: automake --add-missing --copy --force-missing [ 172s] configure.ac:120: installing './compile' [ 172s] configure.ac:125: installing './missing' [ 175s] docs/examples/Makefile.am: installing './depcomp' [ 223s] autoreconf: Leaving directory '.' [ 224s] + ./configure --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --without-nss --without-gnutls --with-openssl --enable-ipv6 --with-ca-path==/etc/ssl/certs --with-ca-bundle=/etc/ssl/ca-bundle.pem --with-icu-uc --with-lber-lib=lber --enable-manual --enable-versioned-symbols --enable-ares --enable-debug --enable-curldebug --disable-static --with-nghttp2 --without-zsh-functions-dir --enable-dlp [ 226s] checking whether to enable maintainer-specific portions of Makefiles... no [ 226s] checking whether make supports nested variables... yes [ 226s] checking whether to enable debug build options... yes [ 226s] checking whether to enable compiler optimizer... (assumed) no [ 226s] checking whether to enable strict compiler warnings... yes [ 226s] checking whether to enable compiler warnings as errors... no [ 226s] checking whether to enable curl debug memory tracking... yes [ 226s] checking whether to enable hiding of library internal symbols... yes [ 226s] checking whether to enable c-ares for DNS lookups... yes [ 226s] checking whether to disable dependency on -lrt... (assumed no) [ 226s] checking whether to enable ECH support... no [ 226s] checking for path separator... : [ 226s] checking for sed... /bin/sed [ 226s] checking for grep... /bin/grep [ 226s] checking for egrep... /bin/grep -E [ 226s] checking for armv7hl-tizen-linux-gnueabihf-ar... no [ 226s] checking for ar... /bin/ar [ 226s] configure: using CFLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fstack-protector-strong -Wl,-z,relro -D_FORTIFY_SOURCE=2 -fPIE -pie -DHAVE_GETIFADDRS [ 226s] configure: CFLAGS note: CFLAGS should only be used to specify C compiler flags, not macro definitions. Use CPPFLAGS for: -D_FORTIFY_SOURCE=2 [ 226s] configure: CFLAGS note: CFLAGS should only be used to specify C compiler flags, not macro definitions. Use CPPFLAGS for: -DHAVE_GETIFADDRS [ 226s] configure: WARNING: Continuing even with errors mentioned immediately above this line. [ 226s] checking for a BSD-compatible install... /bin/install -c [ 226s] checking for armv7hl-tizen-linux-gnueabihf-gcc... armv7hl-tizen-linux-gnueabihf-gcc [ 226s] checking whether the C compiler works... yes [ 226s] checking for C compiler default output file name... a.out [ 226s] checking for suffix of executables... [ 227s] checking whether we are cross compiling... no [ 227s] checking for suffix of object files... o [ 227s] checking whether the compiler supports GNU C... yes [ 227s] checking whether armv7hl-tizen-linux-gnueabihf-gcc accepts -g... yes [ 227s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to enable C11 features... none needed [ 227s] checking whether armv7hl-tizen-linux-gnueabihf-gcc understands -c and -o together... yes [ 227s] checking how to run the C preprocessor... armv7hl-tizen-linux-gnueabihf-gcc -E [ 227s] checking for a sed that does not truncate output... (cached) /bin/sed [ 227s] checking for code coverage support... no [ 227s] checking whether build environment is sane... yes [ 227s] checking for a race-free mkdir -p... /bin/mkdir -p [ 227s] checking for gawk... gawk [ 227s] checking whether make sets $(MAKE)... yes [ 227s] checking whether make supports the include directive... yes (GNU style) [ 228s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 228s] checking curl version... 7.81.0 [ 228s] checking build system type... armv7hl-tizen-linux-gnueabihf [ 229s] checking host system type... armv7hl-tizen-linux-gnueabihf [ 229s] checking for grep that handles long lines and -e... (cached) /bin/grep [ 229s] checking for egrep... /bin/grep -E [ 229s] checking if OS is AIX (to define _ALL_SOURCE)... no [ 229s] checking if _THREAD_SAFE is already defined... no [ 229s] checking if _THREAD_SAFE is actually needed... no [ 229s] checking if _THREAD_SAFE is onwards defined... no [ 229s] checking if _REENTRANT is already defined... no [ 230s] checking if _REENTRANT is actually needed... no [ 230s] checking if _REENTRANT is onwards defined... no [ 230s] checking for special C compiler options needed for large files... no [ 230s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 230s] checking how to print strings... printf [ 230s] checking for a sed that does not truncate output... (cached) /bin/sed [ 230s] checking for fgrep... /bin/grep -F [ 230s] checking for ld used by armv7hl-tizen-linux-gnueabihf-gcc... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 230s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 230s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 230s] checking the name lister (/bin/nm -B) interface... BSD nm [ 230s] checking whether ln -s works... yes [ 230s] checking the maximum length of command line arguments... 1572864 [ 230s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to armv7hl-tizen-linux-gnueabihf format... func_convert_file_noop [ 230s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to toolchain format... func_convert_file_noop [ 230s] checking for /usr/armv7hl-tizen-linux-gnueabihf/bin/ld option to reload object files... -r [ 230s] checking for armv7hl-tizen-linux-gnueabihf-objdump... no [ 230s] checking for objdump... objdump [ 230s] checking how to recognize dependent libraries... pass_all [ 230s] checking for armv7hl-tizen-linux-gnueabihf-dlltool... no [ 230s] checking for dlltool... no [ 230s] checking how to associate runtime and link libraries... printf %s\n [ 230s] checking for armv7hl-tizen-linux-gnueabihf-ar... /bin/ar [ 230s] checking for archiver @FILE support... @ [ 230s] checking for armv7hl-tizen-linux-gnueabihf-strip... no [ 230s] checking for strip... strip [ 230s] checking for armv7hl-tizen-linux-gnueabihf-ranlib... no [ 230s] checking for ranlib... ranlib [ 231s] checking command to parse /bin/nm -B output from armv7hl-tizen-linux-gnueabihf-gcc object... ok [ 231s] checking for sysroot... no [ 231s] checking for a working dd... /bin/dd [ 231s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 231s] checking for armv7hl-tizen-linux-gnueabihf-mt... no [ 231s] checking for mt... no [ 231s] checking if : is a manifest tool... no [ 231s] checking for stdio.h... yes [ 231s] checking for stdlib.h... yes [ 231s] checking for string.h... yes [ 231s] checking for inttypes.h... yes [ 231s] checking for stdint.h... yes [ 231s] checking for strings.h... yes [ 231s] checking for sys/stat.h... yes [ 232s] checking for sys/types.h... yes [ 232s] checking for unistd.h... yes [ 232s] checking for dlfcn.h... yes [ 232s] checking for objdir... .libs [ 232s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no [ 232s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC [ 232s] checking if armv7hl-tizen-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes [ 232s] checking if armv7hl-tizen-linux-gnueabihf-gcc static flag -static works... no [ 232s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... yes [ 232s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes [ 233s] checking whether the armv7hl-tizen-linux-gnueabihf-gcc linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 233s] checking whether -lc should be explicitly linked in... no [ 233s] checking dynamic linker characteristics... GNU/Linux ld.so [ 233s] checking how to hardcode library paths into programs... immediate [ 233s] checking whether stripping libraries is possible... yes [ 233s] checking if libtool supports shared libraries... yes [ 233s] checking whether to build shared libraries... yes [ 233s] checking whether to build static libraries... no [ 233s] checking whether to build shared libraries with -version-info... yes [ 233s] checking whether to build shared libraries with -no-undefined... no [ 233s] checking whether to build shared libraries with -mimpure-text... no [ 233s] checking whether to build shared libraries with PIC... yes [ 233s] checking whether to build static libraries with PIC... no [ 233s] checking whether to build shared libraries only... yes [ 233s] checking whether to build static libraries only... no [ 233s] checking for inline... inline [ 233s] checking if cpp -P is needed... yes [ 233s] checking if cpp -P works... yes [ 233s] checking if compiler is DEC/Compaq/HP C... no [ 233s] checking if compiler is HP-UX C... no [ 233s] checking if compiler is IBM C... no [ 233s] checking if compiler is Intel C... no [ 233s] checking if compiler is clang... no [ 233s] checking if compiler is GNU C... yes [ 234s] checking if compiler is LCC... no [ 234s] checking if compiler is SGI MIPSpro C... no [ 234s] checking if compiler is SGI MIPS C... no [ 234s] checking if compiler is SunPro C... no [ 234s] checking if compiler is Tiny C... no [ 234s] checking if compiler is Watcom C... no [ 234s] checking if compiler accepts some basic options... yes [ 234s] configure: compiler options added: -Werror-implicit-function-declaration [ 235s] checking if compiler accepts debug enabling options... checking if compiler optimizer assumed setting might be used... no [ 236s] checking if compiler accepts strict warning options... yes [ 236s] configure: compiler options added: -pedantic -W -Wpointer-arith -Wwrite-strings -Wunused -Wshadow -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wbad-function-cast -Wfloat-equal -Wno-multichar -Wsign-compare -Wundef -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wold-style-definition -Wstrict-aliasing=3 -Wcast-align -Wtype-limits -Wold-style-declaration -Wmissing-parameter-type -Wempty-body -Wclobbered -Wignored-qualifiers -Wconversion -Wno-sign-conversion -Wvla -ftree-vrp -Wdouble-promotion -Wformat=2 -Warray-bounds=2 -Wshift-negative-value -Wshift-overflow=2 -Wnull-dereference -fdelete-null-pointer-checks -Wduplicated-cond -Wunused-const-variable -Wduplicated-branches -Wrestrict -Walloc-zero -Wformat-overflow=2 -Wformat-truncation=2 -Wimplicit-fallthrough=4 -Wno-system-headers [ 236s] checking if compiler halts on compilation errors... yes [ 236s] checking if compiler halts on negative sized arrays... yes [ 236s] checking if compiler halts on function prototype mismatch... yes [ 237s] checking if compiler supports hiding library internal symbols... yes [ 237s] checking if curl debug memory tracking can be enabled... yes [ 237s] checking for windows.h... no [ 237s] checking whether build target is a native Windows one... no [ 237s] checking whether build target supports WIN32 file API... no [ 237s] checking whether build target supports WIN32 crypto API... no [ 237s] checking for good-to-use Darwin CFLAGS... no [ 237s] checking whether to link macOS CoreFoundation and SystemConfiguration framework... no [ 237s] checking to see if the compiler supports __builtin_available()... no [ 237s] checking whether to support http... yes [ 237s] checking whether to support ftp... yes [ 237s] checking whether to support file... yes [ 237s] checking whether to support ldap... yes [ 237s] checking whether to support ldaps... yes [ 237s] checking whether to support rtsp... yes [ 237s] checking whether to support proxies... yes [ 237s] checking whether to support dict... yes [ 237s] checking whether to support telnet... yes [ 237s] checking whether to support tftp... yes [ 237s] checking whether to support pop3... yes [ 237s] checking whether to support imap... yes [ 237s] checking whether to support smb... yes [ 237s] checking whether to support smtp... yes [ 237s] checking whether to support gopher... yes [ 237s] checking whether to support mqtt... no [ 237s] checking whether to provide built-in manual... yes [ 237s] checking whether to enable generation of C code... yes [ 237s] checking whether to use libgcc... no [ 237s] checking if X/Open network library is required... no [ 237s] checking for gethostbyname... yes [ 237s] checking for windows.h... (cached) no [ 237s] checking for winsock2.h... (cached) no [ 237s] checking for proto/bsdsocket.h... no [ 237s] checking for connect in libraries... yes [ 237s] checking for sys/types.h... (cached) yes [ 237s] checking for sys/time.h... yes [ 237s] checking for monotonic clock_gettime... yes [ 237s] checking for clock_gettime in libraries... no additional lib required [ 238s] checking if monotonic clock_gettime works... yes [ 238s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 238s] checking for zlib options with pkg-config... found [ 238s] checking for zlib.h... yes [ 238s] configure: found both libz and libz.h header [ 238s] checking for BrotliDecoderDecompress in -lbrotlidec... no [ 238s] checking for brotli/decode.h... no [ 238s] checking for ZSTD_createDStream in -lzstd... no [ 238s] checking for zstd.h... no [ 238s] checking for lber.h... no [ 238s] checking for ldap.h... no [ 238s] checking for ldapssl.h... no [ 238s] checking for ldap_ssl.h... no [ 239s] checking for LDAP libraries... cannot find LDAP libraries [ 239s] configure: WARNING: Cannot find libraries for LDAP support: LDAP disabled [ 239s] checking whether to enable IPv6... yes [ 239s] checking if struct sockaddr_in6 has sin6_scope_id member... yes [ 239s] checking if argv can be written to... yes [ 239s] checking if GSS-API support is requested... no [ 239s] checking whether to enable Windows native SSL/TLS... no [ 239s] checking whether to enable Secure Transport... no [ 239s] checking whether to enable Amiga native SSL/TLS (AmiSSL)... no [ 240s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 240s] checking for openssl options with pkg-config... no [ 240s] checking for HMAC_Update in -lcrypto... yes [ 240s] checking for SSL_connect in -lssl... yes [ 240s] checking for openssl/x509.h... yes [ 240s] checking for openssl/rsa.h... yes [ 240s] checking for openssl/crypto.h... yes [ 241s] checking for openssl/pem.h... yes [ 241s] checking for openssl/ssl.h... yes [ 241s] checking for openssl/err.h... yes [ 241s] checking for RAND_egd... no [ 241s] checking for BoringSSL... no [ 241s] checking for libressl... no [ 241s] checking for OpenSSL >= v3... no [ 242s] checking for OpenSSL headers version... 1.1.1 - 0x111 [ 242s] checking for OpenSSL library version... 1.1.1 [ 242s] checking for OpenSSL headers and library versions matching... yes [ 242s] checking for "/dev/urandom"... yes [ 242s] checking for SRP_Calc_client_key in -lcrypto... yes [ 242s] configure: built with one SSL backend [ 242s] checking default CA cert bundle/path... /etc/ssl/ca-bundle.pem [ 242s] =/etc/ssl/certs (capath) [ 242s] checking whether to use builtin CA store of SSL library... no [ 242s] checking for library containing psl_builtin... no [ 242s] configure: WARNING: libpsl was not found [ 243s] checking for library containing gsasl_init... no [ 243s] configure: WARNING: libgsasl was not found [ 243s] checking for RTMP_Init in -lrtmp... no [ 243s] checking whether versioned symbols are wanted... yes [ 243s] checking if libraries can be versioned... yes [ 243s] checking whether to enable Windows native IDN (Windows native builds only)... no [ 243s] checking whether to build with icu-uc... yes [ 243s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 243s] checking for icu-uc options with pkg-config... found [ 243s] configure: pkg-config: IDN_LIBS: "-licuuc -licudata" [ 243s] configure: pkg-config: IDN_LDFLAGS: "" [ 243s] configure: pkg-config: IDN_CPPFLAGS: "" [ 243s] configure: pkg-config: IDN_DIR: "" [ 243s] checking if uidna_nameToASCII_UTF8 can be linked... yes [ 243s] checking whether to build with libidn2... (assumed) yes [ 243s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 243s] checking for libidn2 options with pkg-config... no [ 243s] configure: IDN_LIBS: "-lidn2" [ 243s] configure: IDN_LDFLAGS: "" [ 243s] configure: IDN_CPPFLAGS: "" [ 243s] configure: IDN_DIR: "" [ 243s] checking if idn2_lookup_ul can be linked... no [ 243s] checking for idn2.h... no [ 243s] configure: WARNING: Cannot find libraries for IDN support: IDN disabled [ 243s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 244s] checking for libnghttp2 options with pkg-config... found [ 244s] configure: -l is -lnghttp2 [ 244s] configure: -I is [ 244s] configure: -L is [ 244s] checking for nghttp2_session_set_local_window_size in -lnghttp2... yes [ 244s] checking for nghttp2/nghttp2.h... yes [ 244s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 244s] checking for libngtcp2 options with pkg-config... no [ 244s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 244s] checking for fish options with pkg-config... no [ 244s] checking for malloc.h... yes [ 244s] checking for memory.h... no [ 244s] checking for sys/types.h... (cached) yes [ 244s] checking for sys/time.h... (cached) yes [ 244s] checking for sys/select.h... yes [ 245s] checking for sys/socket.h... yes [ 245s] checking for sys/ioctl.h... yes [ 245s] checking for sys/uio.h... yes [ 245s] checking for assert.h... yes [ 245s] checking for unistd.h... (cached) yes [ 245s] checking for stdlib.h... (cached) yes [ 245s] checking for arpa/inet.h... yes [ 245s] checking for net/if.h... yes [ 245s] checking for netinet/in.h... yes [ 245s] checking for netinet/in6.h... no [ 245s] checking for sys/un.h... yes [ 245s] checking for linux/tcp.h... yes [ 245s] checking for netinet/tcp.h... yes [ 245s] checking for netdb.h... yes [ 246s] checking for sys/sockio.h... no [ 246s] checking for sys/stat.h... (cached) yes [ 246s] checking for sys/param.h... yes [ 246s] checking for termios.h... yes [ 246s] checking for termio.h... yes [ 246s] checking for fcntl.h... yes [ 246s] checking for alloca.h... yes [ 246s] checking for io.h... no [ 246s] checking for pwd.h... yes [ 246s] checking for utime.h... yes [ 246s] checking for sys/utime.h... no [ 246s] checking for sys/poll.h... yes [ 247s] checking for poll.h... yes [ 247s] checking for socket.h... no [ 247s] checking for sys/resource.h... yes [ 247s] checking for libgen.h... yes [ 247s] checking for locale.h... yes [ 247s] checking for errno.h... yes [ 247s] checking for stdbool.h... yes [ 247s] checking for arpa/tftp.h... yes [ 247s] checking for sys/filio.h... no [ 247s] checking for sys/wait.h... yes [ 247s] checking for setjmp.h... yes [ 247s] checking for an ANSI C-conforming const... yes [ 247s] checking for compiler support of C99 variadic macro style... yes [ 248s] checking for compiler support of old gcc variadic macro style... yes [ 248s] checking for size_t... yes [ 248s] checking for sys/types.h... (cached) yes [ 248s] checking for sys/time.h... (cached) yes [ 248s] checking for sys/socket.h... (cached) yes [ 248s] checking for struct timeval... yes [ 248s] checking run-time libs availability... fine [ 248s] checking size of size_t... 4 [ 248s] checking size of long... 4 [ 248s] checking size of int... 4 [ 249s] checking size of short... 2 [ 249s] checking size of time_t... 4 [ 249s] checking size of off_t... 8 [ 249s] checking size of curl_off_t... 8 [ 249s] checking for long long... yes [ 249s] checking if numberLL works... yes [ 249s] checking for ssize_t... yes [ 249s] checking for bool... yes [ 250s] checking for sa_family_t... yes [ 250s] checking for suseconds_t... yes [ 250s] checking if time_t is unsigned... no [ 250s] checking for sys/types.h... (cached) yes [ 250s] checking for poll.h... (cached) yes [ 250s] checking for sys/poll.h... (cached) yes [ 250s] checking for in_addr_t... yes [ 250s] checking for struct sockaddr_storage... yes [ 250s] checking for sys/select.h... (cached) yes [ 250s] checking for sys/socket.h... (cached) yes [ 250s] checking for select... yes [ 250s] checking types of args and return type for select... int,fd_set *,struct timeval *,int [ 250s] checking for sys/types.h... (cached) yes [ 250s] checking for sys/socket.h... (cached) yes [ 250s] checking for recv... yes [ 251s] checking types of args and return type for recv... int,void *,size_t,int,int [ 251s] checking for sys/types.h... (cached) yes [ 251s] checking for sys/socket.h... (cached) yes [ 251s] checking for send... yes [ 253s] checking types of args and return type for send... int,const void *,size_t,int,int [ 253s] checking for sys/types.h... (cached) yes [ 253s] checking for sys/socket.h... (cached) yes [ 253s] checking for MSG_NOSIGNAL... yes [ 253s] checking for sys/types.h... (cached) yes [ 253s] checking for unistd.h... (cached) yes [ 253s] checking if alarm can be linked... yes [ 253s] checking if alarm is prototyped... yes [ 253s] checking if alarm is compilable... yes [ 253s] checking if alarm usage allowed... yes [ 253s] checking if alarm might be used... yes [ 253s] checking for sys/types.h... (cached) yes [ 253s] checking for string.h... (cached) yes [ 253s] checking for strings.h... (cached) yes [ 253s] checking for sys/types.h... (cached) yes [ 253s] checking for libgen.h... (cached) yes [ 253s] checking if basename can be linked... yes [ 254s] checking if basename is prototyped... yes [ 254s] checking if basename is compilable... yes [ 254s] checking if basename usage allowed... yes [ 254s] checking if basename might be used... yes [ 254s] checking for sys/types.h... (cached) yes [ 254s] checking for socket.h... (cached) no [ 254s] checking if closesocket can be linked... no [ 254s] checking if closesocket might be used... no [ 254s] checking for sys/types.h... (cached) yes [ 254s] checking for sys/socket.h... (cached) yes [ 254s] checking if CloseSocket can be linked... no [ 254s] checking if CloseSocket might be used... no [ 254s] checking if connect can be linked... yes [ 254s] checking if connect is prototyped... yes [ 254s] checking if connect is compilable... yes [ 254s] checking if connect usage allowed... yes [ 254s] checking if connect might be used... yes [ 254s] checking for sys/types.h... (cached) yes [ 254s] checking for unistd.h... (cached) yes [ 254s] checking for fcntl.h... (cached) yes [ 254s] checking if fcntl can be linked... yes [ 254s] checking if fcntl is prototyped... yes [ 254s] checking if fcntl is compilable... yes [ 254s] checking if fcntl usage allowed... yes [ 254s] checking if fcntl might be used... yes [ 254s] checking if fcntl O_NONBLOCK is compilable... yes [ 254s] checking if fcntl O_NONBLOCK usage allowed... yes [ 254s] checking if fcntl O_NONBLOCK might be used... yes [ 254s] checking for windows.h... (cached) no [ 254s] checking for winsock2.h... (cached) no [ 255s] checking for ws2tcpip.h... (cached) no [ 255s] checking for sys/types.h... (cached) yes [ 255s] checking for netdb.h... (cached) yes [ 255s] checking if freeaddrinfo can be linked... yes [ 255s] checking if freeaddrinfo is prototyped... yes [ 255s] checking if freeaddrinfo is compilable... yes [ 255s] checking if freeaddrinfo usage allowed... yes [ 255s] checking if freeaddrinfo might be used... yes [ 255s] checking for sys/types.h... (cached) yes [ 255s] checking for sys/xattr.h... yes [ 255s] checking if fsetxattr can be linked... yes [ 255s] checking if fsetxattr is prototyped... yes [ 255s] checking if fsetxattr takes 5 args.... yes [ 255s] checking if fsetxattr is compilable... yes [ 255s] checking if fsetxattr usage allowed... yes [ 255s] checking if fsetxattr might be used... yes [ 255s] checking if ftruncate can be linked... yes [ 255s] checking if ftruncate is prototyped... yes [ 255s] checking if ftruncate is compilable... yes [ 255s] checking if ftruncate usage allowed... yes [ 255s] checking if ftruncate might be used... yes [ 255s] checking for sys/types.h... (cached) yes [ 255s] checking for stdlib.h... (cached) yes [ 255s] checking if getaddrinfo can be linked... yes [ 256s] checking if getaddrinfo is prototyped... yes [ 256s] checking if getaddrinfo is compilable... yes [ 256s] checking if getaddrinfo seems to work... yes [ 256s] checking if getaddrinfo usage allowed... yes [ 256s] checking if getaddrinfo might be used... yes [ 256s] checking if getaddrinfo is threadsafe... yes [ 256s] checking if gethostbyname can be linked... yes [ 256s] checking if gethostbyname is prototyped... yes [ 256s] checking if gethostbyname is compilable... yes [ 256s] checking if gethostbyname usage allowed... yes [ 256s] checking if gethostbyname might be used... yes [ 256s] checking if gethostbyname_r can be linked... yes [ 256s] checking if gethostbyname_r is prototyped... yes [ 257s] checking if gethostbyname_r takes 3 args.... no [ 257s] checking if gethostbyname_r takes 5 args.... no [ 257s] checking if gethostbyname_r takes 6 args.... yes [ 257s] checking if gethostbyname_r is compilable... yes [ 257s] checking if gethostbyname_r usage allowed... yes [ 257s] checking if gethostbyname_r might be used... yes [ 257s] checking if gethostname can be linked... yes [ 257s] checking if gethostname is prototyped... yes [ 257s] checking if gethostname is compilable... yes [ 257s] checking for gethostname arg 2 data type... unsigned int [ 257s] checking if gethostname usage allowed... yes [ 257s] checking if gethostname might be used... yes [ 257s] checking if getpeername can be linked... yes [ 257s] checking if getpeername is prototyped... yes [ 257s] checking if getpeername is compilable... yes [ 257s] checking if getpeername usage allowed... yes [ 257s] checking if getpeername might be used... yes [ 258s] checking if getsockname can be linked... yes [ 258s] checking if getsockname is prototyped... yes [ 258s] checking if getsockname is compilable... yes [ 258s] checking if getsockname usage allowed... yes [ 258s] checking if getsockname might be used... yes [ 258s] checking for net/if.h... (cached) yes [ 258s] checking if if_nametoindex can be linked... yes [ 258s] checking if if_nametoindex is prototyped... yes [ 258s] checking if if_nametoindex is compilable... yes [ 258s] checking if if_nametoindex usage allowed... yes [ 258s] checking if if_nametoindex might be used... yes [ 258s] checking for sys/types.h... (cached) yes [ 258s] checking for sys/socket.h... (cached) yes [ 258s] checking for netinet/in.h... (cached) yes [ 258s] checking for ifaddrs.h... yes [ 258s] checking if getifaddrs can be linked... yes [ 258s] checking if getifaddrs is prototyped... yes [ 258s] checking if getifaddrs is compilable... yes [ 258s] checking if getifaddrs seems to work... no [ 258s] checking if getifaddrs might be used... no [ 258s] checking for sys/types.h... (cached) yes [ 258s] checking for sys/time.h... (cached) yes [ 258s] checking if gmtime_r can be linked... yes [ 258s] checking if gmtime_r is prototyped... yes [ 258s] checking if gmtime_r is compilable... yes [ 259s] checking if gmtime_r seems to work... yes [ 259s] checking if gmtime_r usage allowed... yes [ 259s] checking if gmtime_r might be used... yes [ 259s] checking for sys/types.h... (cached) yes [ 259s] checking for sys/socket.h... (cached) yes [ 259s] checking for netinet/in.h... (cached) yes [ 259s] checking for arpa/inet.h... (cached) yes [ 259s] checking if inet_ntop can be linked... yes [ 259s] checking if inet_ntop is prototyped... yes [ 259s] checking if inet_ntop is compilable... yes [ 259s] checking if inet_ntop seems to work... yes [ 259s] checking if inet_ntop usage allowed... yes [ 259s] checking if inet_ntop might be used... yes [ 259s] checking if inet_pton can be linked... yes [ 259s] checking if inet_pton is prototyped... yes [ 259s] checking if inet_pton is compilable... yes [ 260s] checking if inet_pton seems to work... yes [ 260s] checking if inet_pton usage allowed... yes [ 260s] checking if inet_pton might be used... yes [ 260s] checking for sys/types.h... (cached) yes [ 260s] checking for unistd.h... (cached) yes [ 260s] checking for sys/socket.h... (cached) yes [ 260s] checking for sys/ioctl.h... (cached) yes [ 260s] checking for stropts.h... no [ 260s] checking if ioctl can be linked... yes [ 260s] checking if ioctl is prototyped... yes [ 260s] checking if ioctl is compilable... yes [ 260s] checking if ioctl usage allowed... yes [ 260s] checking if ioctl might be used... yes [ 260s] checking if ioctl FIONBIO is compilable... yes [ 260s] checking if ioctl FIONBIO usage allowed... yes [ 260s] checking if ioctl FIONBIO might be used... yes [ 260s] checking if ioctl SIOCGIFADDR is compilable... yes [ 260s] checking if ioctl SIOCGIFADDR usage allowed... yes [ 260s] checking if ioctl SIOCGIFADDR might be used... yes [ 260s] checking if ioctlsocket can be linked... no [ 260s] checking if ioctlsocket might be used... no [ 260s] checking if IoctlSocket can be linked... no [ 260s] checking if IoctlSocket might be used... no [ 261s] checking if localtime_r can be linked... yes [ 261s] checking if localtime_r is prototyped... yes [ 261s] checking if localtime_r is compilable... yes [ 261s] checking if localtime_r seems to work... yes [ 261s] checking if localtime_r usage allowed... yes [ 261s] checking if localtime_r might be used... yes [ 261s] checking if memrchr can be linked... yes [ 261s] checking if memrchr is prototyped... no [ 261s] checking if memrchr might be used... no [ 261s] checking if poll can be linked... yes [ 261s] checking if poll is prototyped... yes [ 261s] checking if poll is compilable... yes [ 262s] checking if poll seems to work... yes [ 262s] checking if poll usage allowed... yes [ 262s] checking if poll might be used... yes [ 262s] checking if setsockopt can be linked... yes [ 262s] checking if setsockopt is prototyped... yes [ 262s] checking if setsockopt is compilable... yes [ 262s] checking if setsockopt usage allowed... yes [ 262s] checking if setsockopt might be used... yes [ 262s] checking if setsockopt SO_NONBLOCK is compilable... no [ 262s] checking if setsockopt SO_NONBLOCK might be used... no [ 262s] checking for sys/types.h... (cached) yes [ 262s] checking for signal.h... yes [ 263s] checking if sigaction can be linked... yes [ 263s] checking if sigaction is prototyped... yes [ 263s] checking if sigaction is compilable... yes [ 263s] checking if sigaction usage allowed... yes [ 263s] checking if sigaction might be used... yes [ 263s] checking if siginterrupt can be linked... yes [ 263s] checking if siginterrupt is prototyped... yes [ 263s] checking if siginterrupt is compilable... yes [ 263s] checking if siginterrupt usage allowed... yes [ 263s] checking if siginterrupt might be used... yes [ 263s] checking if signal can be linked... yes [ 263s] checking if signal is prototyped... yes [ 263s] checking if signal is compilable... yes [ 263s] checking if signal usage allowed... yes [ 263s] checking if signal might be used... yes [ 263s] checking for sys/types.h... (cached) yes [ 263s] checking for setjmp.h... (cached) yes [ 263s] checking if sigsetjmp can be linked... no [ 263s] checking if sigsetjmp seems a macro... yes [ 263s] checking if sigsetjmp is compilable... yes [ 263s] checking if sigsetjmp usage allowed... yes [ 263s] checking if sigsetjmp might be used... yes [ 264s] checking if socket can be linked... yes [ 264s] checking if socket is prototyped... yes [ 264s] checking if socket is compilable... yes [ 264s] checking if socket usage allowed... yes [ 264s] checking if socket might be used... yes [ 264s] checking if socketpair can be linked... yes [ 264s] checking if socketpair is prototyped... yes [ 264s] checking if socketpair is compilable... yes [ 264s] checking if socketpair usage allowed... yes [ 264s] checking if socketpair might be used... yes [ 264s] checking if strcasecmp can be linked... yes [ 264s] checking if strcasecmp is prototyped... yes [ 264s] checking if strcasecmp is compilable... yes [ 264s] checking if strcasecmp usage allowed... yes [ 264s] checking if strcasecmp might be used... yes [ 264s] checking if strcmpi can be linked... no [ 264s] checking if strcmpi might be used... no [ 264s] checking if strdup can be linked... yes [ 264s] checking if strdup is prototyped... yes [ 264s] checking if strdup is compilable... yes [ 264s] checking if strdup usage allowed... yes [ 264s] checking if strdup might be used... yes [ 265s] checking if strerror_r can be linked... yes [ 265s] checking if strerror_r is prototyped... yes [ 265s] checking if strerror_r is compilable... yes [ 265s] checking if strerror_r is glibc like... no [ 265s] checking if strerror_r is POSIX like... yes [ 265s] checking if strerror_r seems to work... yes [ 265s] checking if strerror_r usage allowed... yes [ 265s] checking if strerror_r might be used... yes [ 265s] checking if stricmp can be linked... no [ 265s] checking if stricmp might be used... no [ 265s] checking if strncmpi can be linked... no [ 266s] checking if strncmpi might be used... no [ 266s] checking if strnicmp can be linked... no [ 266s] checking if strnicmp might be used... no [ 266s] checking if strstr can be linked... yes [ 266s] checking if strstr is prototyped... yes [ 266s] checking if strstr is compilable... yes [ 266s] checking if strstr usage allowed... yes [ 266s] checking if strstr might be used... yes [ 266s] checking if strtok_r can be linked... yes [ 266s] checking if strtok_r is prototyped... yes [ 266s] checking if strtok_r is compilable... yes [ 266s] checking if strtok_r usage allowed... yes [ 266s] checking if strtok_r might be used... yes [ 266s] checking if strtoll can be linked... yes [ 266s] checking if strtoll is prototyped... yes [ 266s] checking if strtoll is compilable... yes [ 266s] checking if strtoll usage allowed... yes [ 266s] checking if strtoll might be used... yes [ 266s] checking for sys/types.h... (cached) yes [ 266s] checking for sys/uio.h... (cached) yes [ 266s] checking if writev can be linked... yes [ 266s] checking if writev is prototyped... yes [ 266s] checking if writev is compilable... yes [ 266s] checking if writev usage allowed... yes [ 266s] checking if writev might be used... yes [ 267s] checking for armv7hl-tizen-linux-gnueabihf-gcc options needed to detect all undeclared functions... none needed [ 267s] checking whether getpwuid_r is declared... yes [ 267s] checking for fnmatch... yes [ 267s] checking for geteuid... yes [ 267s] checking for getpass_r... no [ 267s] checking deeper for getpass_r... but still no [ 267s] checking for getppid... yes [ 268s] checking for getpwuid... yes [ 268s] checking for getpwuid_r... yes [ 268s] checking for getrlimit... yes [ 268s] checking for gettimeofday... yes [ 268s] checking for if_nametoindex... yes [ 268s] checking for mach_absolute_time... no [ 268s] checking deeper for mach_absolute_time... but still no [ 269s] checking for pipe... yes [ 269s] checking for setlocale... yes [ 269s] checking for setmode... no [ 269s] checking deeper for setmode... but still no [ 269s] checking for setrlimit... yes [ 269s] checking for usleep... yes [ 270s] checking for utime... yes [ 270s] checking for utimes... yes [ 270s] checking how to set a socket into non-blocking mode... fcntl O_NONBLOCK [ 270s] checking for perl... /bin/perl [ 270s] checking for gnroff... no [ 270s] checking for nroff... no [ 270s] configure: WARNING: disabling built-in manual [ 270s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... (cached) /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 270s] checking for libcares options with pkg-config... found [ 270s] configure: pkg-config: ares_LIBS: "-lcares" [ 270s] configure: pkg-config: ares_LDFLAGS: "" [ 270s] configure: pkg-config: ares_CPPFLAGS: "" [ 270s] checking that c-ares is good and recent enough... yes [ 270s] checking whether to use POSIX threads for threaded resolver... auto [ 270s] checking convert -I options to -isystem... yes [ 270s] checking whether to enable verbose strings... yes [ 270s] checking whether to enable SSPI support (Windows native builds only)... no [ 270s] checking whether to enable cryptographic authentication methods... yes [ 270s] checking whether to support NTLM... yes [ 270s] checking whether to enable NTLM delegation to winbind's helper... yes [ 270s] checking whether to enable TLS-SRP authentication... yes [ 270s] checking whether to enable Unix domain sockets... auto [ 270s] checking for struct sockaddr_un.sun_path... yes [ 270s] checking whether to support cookies... yes [ 270s] checking whether to support socketpair... yes [ 270s] checking whether to support HTTP authentication... yes [ 270s] checking whether to support DoH... yes [ 270s] checking whether to support the MIME API... yes [ 270s] checking whether to support date parsing... yes [ 270s] checking whether to support netrc parsing... yes [ 270s] checking whether to support progress-meter... yes [ 270s] checking whether to support DNS shuffling... yes [ 270s] checking whether to support curl_easy_option*... yes [ 270s] checking whether to support alt-svc... no [ 270s] checking whether to support HSTS... yes [ 270s] checking whether hiding of library internal symbols will actually happen... yes [ 271s] configure: using CFLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fstack-protector-strong -Wl,-z,relro -D_FORTIFY_SOURCE=2 -fPIE -pie -DHAVE_GETIFADDRS -Werror-implicit-function-declaration -g -pedantic -W -Wpointer-arith -Wwrite-strings -Wunused -Wshadow -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wbad-function-cast -Wfloat-equal -Wno-multichar -Wsign-compare -Wundef -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wold-style-definition -Wstrict-aliasing=3 -Wcast-align -Wtype-limits -Wold-style-declaration -Wmissing-parameter-type -Wempty-body -Wclobbered -Wignored-qualifiers -Wconversion -Wno-sign-conversion -Wvla -ftree-vrp -Wdouble-promotion -Wformat=2 -Warray-bounds=2 -Wshift-negative-value -Wshift-overflow=2 -Wnull-dereference -fdelete-null-pointer-checks -Wduplicated-cond -Wunused-const-variable -Wduplicated-branches -Wrestrict -Walloc-zero -Wformat-overflow=2 -Wformat-truncation=2 -Wimplicit-fallthrough=4 -Wno-system-headers [ 271s] configure: CFLAGS note: CFLAGS should only be used to specify C compiler flags, not macro definitions. Use CPPFLAGS for: -D_FORTIFY_SOURCE=2 [ 271s] configure: CFLAGS note: CFLAGS should only be used to specify C compiler flags, not macro definitions. Use CPPFLAGS for: -DHAVE_GETIFADDRS [ 271s] configure: WARNING: Continuing even with errors mentioned immediately above this line. [ 272s] checking that generated files are newer than configure... done [ 272s] configure: creating ./config.status [ 275s] config.status: creating Makefile [ 275s] config.status: creating docs/Makefile [ 275s] config.status: creating docs/examples/Makefile [ 276s] config.status: creating docs/libcurl/Makefile [ 276s] config.status: creating docs/libcurl/opts/Makefile [ 276s] config.status: creating docs/cmdline-opts/Makefile [ 276s] config.status: creating include/Makefile [ 276s] config.status: creating include/curl/Makefile [ 276s] config.status: creating src/Makefile [ 276s] config.status: creating lib/Makefile [ 276s] config.status: creating extensions/Makefile [ 276s] config.status: creating scripts/Makefile [ 276s] config.status: creating lib/libcurl.vers [ 277s] config.status: creating tests/Makefile [ 277s] config.status: creating tests/certs/Makefile [ 277s] config.status: creating tests/certs/scripts/Makefile [ 277s] config.status: creating tests/data/Makefile [ 277s] config.status: creating tests/server/Makefile [ 277s] config.status: creating tests/libtest/Makefile [ 277s] config.status: creating tests/unit/Makefile [ 277s] config.status: creating packages/Makefile [ 277s] config.status: creating packages/vms/Makefile [ 278s] config.status: creating curl-config [ 278s] config.status: creating libcurl.pc [ 278s] config.status: creating lib/curl_config.h [ 278s] config.status: executing depfiles commands [ 351s] config.status: executing libtool commands [ 352s] configure: amending lib/Makefile [ 352s] configure: amending src/Makefile [ 352s] configure: amending tests/unit/Makefile [ 352s] configure: amending tests/server/Makefile [ 353s] configure: amending tests/libtest/Makefile [ 353s] configure: amending docs/examples/Makefile [ 353s] configure: Configured to build curl/libcurl: [ 353s] [ 353s] Host setup: armv7hl-tizen-linux-gnueabihf [ 353s] Install prefix: /usr [ 353s] Compiler: armv7hl-tizen-linux-gnueabihf-gcc [ 353s] CFLAGS: -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fstack-protector-strong -Wl,-z,relro -D_FORTIFY_SOURCE=2 -fPIE -pie -DHAVE_GETIFADDRS -Werror-implicit-function-declaration -g -pedantic -W -Wpointer-arith -Wwrite-strings -Wunused -Wshadow -Winline -Wnested-externs -Wmissing-declarations -Wmissing-prototypes -Wno-long-long -Wbad-function-cast -Wfloat-equal -Wno-multichar -Wsign-compare -Wundef -Wno-format-nonliteral -Wendif-labels -Wstrict-prototypes -Wdeclaration-after-statement -Wold-style-definition -Wstrict-aliasing=3 -Wcast-align -Wtype-limits -Wold-style-declaration -Wmissing-parameter-type -Wempty-body -Wclobbered -Wignored-qualifiers -Wconversion -Wno-sign-conversion -Wvla -ftree-vrp -Wdouble-promotion -Wformat=2 -Warray-bounds=2 -Wshift-negative-value -Wshift-overflow=2 -Wnull-dereference -fdelete-null-pointer-checks -Wduplicated-cond -Wunused-const-variable -Wduplicated-branches -Wrestrict -Walloc-zero -Wformat-overflow=2 -Wformat-truncation=2 -Wimplicit-fallthrough=4 -Wno-system-headers [ 353s] CPPFLAGS: -DHAVE_PK11_CREATEGENERICOBJECT -DHAVE_GETIFADDRS [ 353s] LDFLAGS: [ 353s] LIBS: -lcares -lnghttp2 -ldl -licuuc -licudata -lssl -lcrypto -lz [ 353s] [ 353s] curl version: 7.81.0 [ 353s] SSL: enabled (OpenSSL) [ 353s] SSH: no (--with-{libssh,libssh2}) [ 353s] zlib: enabled [ 353s] brotli: no (--with-brotli) [ 353s] zstd: no (--with-zstd) [ 353s] GSS-API: no (--with-gssapi) [ 353s] GSASL: no (libgsasl not found) [ 353s] TLS-SRP: enabled [ 353s] resolver: c-ares [ 353s] IPv6: enabled [ 353s] Unix sockets: enabled [ 353s] IDN: enabled (icu-uc) [ 353s] Build libcurl: Shared=yes, Static=no [ 353s] Built-in manual: no (--enable-manual) [ 353s] --libcurl option: enabled (--disable-libcurl-option) [ 353s] Verbose errors: enabled (--disable-verbose) [ 353s] Code coverage: disabled [ 353s] SSPI: no (--enable-sspi) [ 353s] ca cert bundle: /etc/ssl/ca-bundle.pem (warning: certs not found) [ 353s] ca cert path: =/etc/ssl/certs (warning: certs not found) [ 353s] ca fallback: no [ 353s] LDAP: no (--enable-ldap / --with-ldap-lib / --with-lber-lib) [ 353s] LDAPS: no (--enable-ldaps) [ 353s] RTSP: enabled [ 353s] RTMP: no (--with-librtmp) [ 353s] PSL: no (libpsl not found) [ 353s] Alt-svc: enabled (--disable-alt-svc) [ 353s] HSTS: enabled (--disable-hsts) [ 353s] HTTP1: enabled (internal) [ 353s] HTTP2: enabled (nghttp2) [ 353s] HTTP3: no (--with-ngtcp2, --with-quiche) [ 353s] ECH: no (--enable-ech) [ 353s] Protocols: DICT FILE FTP FTPS GOPHER GOPHERS HTTP HTTPS IMAP IMAPS MQTT POP3 POP3S RTSP SMB SMBS SMTP SMTPS TELNET TFTP [ 353s] Features: AsynchDNS HSTS HTTP2 HTTPS-proxy IDN IPv6 Largefile NTLM NTLM_WB SSL TLS-SRP UnixSockets alt-svc libz [ 353s] Tizen Features: [ 353s] [ 355s] + sed -i -e 's,-L/usr/lib ,,g;s,-L/usr/lib64 ,,g;s,-L/usr/lib$,,g;s,-L/usr/lib64$,,g' Makefile libcurl.pc [ 355s] + sed -i -e 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' -e 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' libtool [ 355s] + make -j8 [ 355s] Making all in lib [ 355s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 355s] make all-am [ 355s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 355s] CC libcurl_la-asyn-ares.lo [ 355s] CC libcurl_la-altsvc.lo [ 355s] CC libcurl_la-conncache.lo [ 355s] CC libcurl_la-amigaos.lo [ 355s] CC libcurl_la-base64.lo [ 355s] CC libcurl_la-asyn-thread.lo [ 355s] CC libcurl_la-bufref.lo [ 355s] CC libcurl_la-c-hyper.lo [ 364s] CC libcurl_la-connect.lo [ 364s] CC libcurl_la-content_encoding.lo [ 365s] CC libcurl_la-cookie.lo [ 365s] CC libcurl_la-curl_addrinfo.lo [ 365s] CC libcurl_la-curl_ctype.lo [ 365s] CC libcurl_la-curl_des.lo [ 365s] CC libcurl_la-curl_endian.lo [ 365s] CC libcurl_la-curl_fnmatch.lo [ 374s] CC libcurl_la-curl_get_line.lo [ 374s] CC libcurl_la-curl_gethostname.lo [ 374s] CC libcurl_la-curl_memrchr.lo [ 374s] CC libcurl_la-curl_gssapi.lo [ 374s] CC libcurl_la-curl_multibyte.lo [ 374s] CC libcurl_la-curl_ntlm_core.lo [ 374s] CC libcurl_la-curl_ntlm_wb.lo [ 375s] CC libcurl_la-curl_path.lo [ 383s] CC libcurl_la-curl_range.lo [ 384s] CC libcurl_la-curl_rtmp.lo [ 384s] CC libcurl_la-curl_sasl.lo [ 384s] CC libcurl_la-curl_sspi.lo [ 384s] CC libcurl_la-curl_threads.lo [ 384s] CC libcurl_la-dict.lo [ 384s] CC libcurl_la-doh.lo [ 384s] CC libcurl_la-dotdot.lo [ 393s] CC libcurl_la-dynbuf.lo [ 393s] CC libcurl_la-easy.lo [ 393s] CC libcurl_la-easygetopt.lo [ 393s] CC libcurl_la-easyoptions.lo [ 394s] CC libcurl_la-escape.lo [ 394s] CC libcurl_la-file.lo [ 394s] CC libcurl_la-fileinfo.lo [ 394s] CC libcurl_la-formdata.lo [ 403s] CC libcurl_la-ftp.lo [ 403s] CC libcurl_la-ftplistparser.lo [ 403s] CC libcurl_la-getenv.lo [ 403s] CC libcurl_la-getinfo.lo [ 403s] CC libcurl_la-gopher.lo [ 403s] CC libcurl_la-hash.lo [ 403s] CC libcurl_la-hmac.lo [ 404s] CC libcurl_la-hostasyn.lo [ 412s] CC libcurl_la-hostcheck.lo [ 412s] CC libcurl_la-hostip.lo [ 413s] CC libcurl_la-hostip4.lo [ 413s] CC libcurl_la-hostip6.lo [ 413s] CC libcurl_la-hostsyn.lo [ 413s] CC libcurl_la-hsts.lo [ 414s] CC libcurl_la-http.lo [ 414s] CC libcurl_la-http2.lo [ 421s] CC libcurl_la-http_chunks.lo [ 422s] CC libcurl_la-http_digest.lo [ 422s] CC libcurl_la-http_negotiate.lo [ 422s] CC libcurl_la-http_ntlm.lo [ 422s] CC libcurl_la-http_proxy.lo [ 422s] CC libcurl_la-http_aws_sigv4.lo [ 424s] CC libcurl_la-idn_win32.lo [ 425s] CC libcurl_la-if2ip.lo [ 431s] CC libcurl_la-imap.lo [ 432s] CC libcurl_la-inet_ntop.lo [ 432s] CC libcurl_la-inet_pton.lo [ 432s] CC libcurl_la-krb5.lo [ 432s] CC libcurl_la-ldap.lo [ 432s] CC libcurl_la-llist.lo [ 434s] CC libcurl_la-md4.lo [ 434s] CC libcurl_la-md5.lo [ 441s] CC libcurl_la-memdebug.lo [ 441s] CC libcurl_la-mime.lo [ 441s] CC libcurl_la-mprintf.lo [ 441s] CC libcurl_la-mqtt.lo [ 441s] CC libcurl_la-multi.lo [ 442s] CC libcurl_la-netrc.lo [ 443s] CC libcurl_la-non-ascii.lo [ 444s] CC libcurl_la-nonblock.lo [ 451s] CC libcurl_la-openldap.lo [ 451s] CC libcurl_la-parsedate.lo [ 451s] CC libcurl_la-pingpong.lo [ 451s] CC libcurl_la-pop3.lo [ 452s] CC libcurl_la-progress.lo [ 452s] CC libcurl_la-psl.lo [ 452s] CC libcurl_la-rand.lo [ 453s] CC libcurl_la-rename.lo [ 460s] CC libcurl_la-rtsp.lo [ 461s] CC libcurl_la-select.lo [ 461s] CC libcurl_la-sendf.lo [ 461s] CC libcurl_la-setopt.lo [ 461s] CC libcurl_la-sha256.lo [ 462s] CC libcurl_la-share.lo [ 462s] CC libcurl_la-slist.lo [ 462s] CC libcurl_la-smb.lo [ 470s] CC libcurl_la-smtp.lo [ 470s] sendf.c: In function 'Curl_write': [ 470s] sendf.c:322:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 470s] 322 | u_int32_t destination_ipv4 = 0; [ 470s] | ^~~~~~~~~ [ 470s] CC libcurl_la-socketpair.lo [ 471s] CC libcurl_la-socks.lo [ 471s] CC libcurl_la-socks_gssapi.lo [ 471s] CC libcurl_la-socks_sspi.lo [ 471s] CC libcurl_la-speedcheck.lo [ 472s] CC libcurl_la-splay.lo [ 472s] CC libcurl_la-strcase.lo [ 479s] CC libcurl_la-strdup.lo [ 480s] CC libcurl_la-strerror.lo [ 480s] CC libcurl_la-strtok.lo [ 481s] CC libcurl_la-strtoofft.lo [ 481s] CC libcurl_la-system_win32.lo [ 481s] CC libcurl_la-telnet.lo [ 481s] CC libcurl_la-tftp.lo [ 482s] CC libcurl_la-timeval.lo [ 489s] CC libcurl_la-transfer.lo [ 489s] CC libcurl_la-url.lo [ 490s] CC libcurl_la-urlapi.lo [ 490s] CC libcurl_la-version.lo [ 490s] CC libcurl_la-version_win32.lo [ 491s] CC libcurl_la-warnless.lo [ 491s] CC libcurl_la-wildcard.lo [ 491s] CC libcurl_la-x509asn1.lo [ 499s] url.c: In function 'Curl_idnconvert_hostname': [ 499s] url.c:1661:5: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 499s] 1661 | UErrorCode errorCode = U_ZERO_ERROR; [ 499s] | ^~~~~~~~~~ [ 499s] CC libcurlu_la-altsvc.lo [ 499s] CC libcurlu_la-amigaos.lo [ 499s] CC libcurlu_la-asyn-ares.lo [ 500s] CC libcurlu_la-asyn-thread.lo [ 500s] CC libcurlu_la-base64.lo [ 500s] CC libcurlu_la-bufref.lo [ 500s] CC libcurlu_la-c-hyper.lo [ 501s] CC libcurlu_la-conncache.lo [ 509s] CC libcurlu_la-connect.lo [ 509s] CC libcurlu_la-content_encoding.lo [ 509s] CC libcurlu_la-cookie.lo [ 509s] CC libcurlu_la-curl_addrinfo.lo [ 510s] CC libcurlu_la-curl_ctype.lo [ 510s] CC libcurlu_la-curl_des.lo [ 510s] CC libcurlu_la-curl_endian.lo [ 510s] CC libcurlu_la-curl_fnmatch.lo [ 519s] CC libcurlu_la-curl_get_line.lo [ 519s] CC libcurlu_la-curl_gethostname.lo [ 519s] CC libcurlu_la-curl_gssapi.lo [ 519s] CC libcurlu_la-curl_memrchr.lo [ 519s] CC libcurlu_la-curl_multibyte.lo [ 519s] CC libcurlu_la-curl_ntlm_core.lo [ 519s] CC libcurlu_la-curl_ntlm_wb.lo [ 520s] CC libcurlu_la-curl_path.lo [ 528s] CC libcurlu_la-curl_range.lo [ 528s] CC libcurlu_la-curl_rtmp.lo [ 528s] CC libcurlu_la-curl_sspi.lo [ 528s] CC libcurlu_la-curl_sasl.lo [ 528s] CC libcurlu_la-curl_threads.lo [ 529s] CC libcurlu_la-dict.lo [ 529s] CC libcurlu_la-doh.lo [ 529s] CC libcurlu_la-dotdot.lo [ 538s] CC libcurlu_la-dynbuf.lo [ 538s] CC libcurlu_la-easy.lo [ 538s] CC libcurlu_la-easygetopt.lo [ 538s] CC libcurlu_la-easyoptions.lo [ 538s] CC libcurlu_la-escape.lo [ 538s] CC libcurlu_la-file.lo [ 538s] CC libcurlu_la-fileinfo.lo [ 539s] CC libcurlu_la-formdata.lo [ 547s] CC libcurlu_la-ftp.lo [ 547s] CC libcurlu_la-ftplistparser.lo [ 547s] CC libcurlu_la-getenv.lo [ 547s] CC libcurlu_la-getinfo.lo [ 547s] CC libcurlu_la-gopher.lo [ 548s] CC libcurlu_la-hash.lo [ 548s] CC libcurlu_la-hmac.lo [ 549s] CC libcurlu_la-hostasyn.lo [ 556s] CC libcurlu_la-hostcheck.lo [ 557s] CC libcurlu_la-hostip.lo [ 557s] CC libcurlu_la-hostip4.lo [ 557s] CC libcurlu_la-hostip6.lo [ 557s] CC libcurlu_la-hostsyn.lo [ 557s] CC libcurlu_la-hsts.lo [ 558s] CC libcurlu_la-http.lo [ 558s] CC libcurlu_la-http2.lo [ 566s] CC libcurlu_la-http_chunks.lo [ 566s] CC libcurlu_la-http_digest.lo [ 566s] CC libcurlu_la-http_negotiate.lo [ 566s] CC libcurlu_la-http_ntlm.lo [ 566s] CC libcurlu_la-http_proxy.lo [ 567s] CC libcurlu_la-http_aws_sigv4.lo [ 569s] CC libcurlu_la-idn_win32.lo [ 569s] CC libcurlu_la-if2ip.lo [ 575s] CC libcurlu_la-imap.lo [ 575s] CC libcurlu_la-inet_ntop.lo [ 575s] CC libcurlu_la-inet_pton.lo [ 575s] CC libcurlu_la-krb5.lo [ 576s] CC libcurlu_la-ldap.lo [ 577s] CC libcurlu_la-llist.lo [ 578s] CC libcurlu_la-md4.lo [ 578s] CC libcurlu_la-md5.lo [ 584s] CC libcurlu_la-memdebug.lo [ 585s] CC libcurlu_la-mime.lo [ 585s] CC libcurlu_la-mprintf.lo [ 586s] CC libcurlu_la-mqtt.lo [ 586s] CC libcurlu_la-multi.lo [ 586s] CC libcurlu_la-netrc.lo [ 587s] CC libcurlu_la-non-ascii.lo [ 588s] CC libcurlu_la-nonblock.lo [ 594s] CC libcurlu_la-openldap.lo [ 595s] CC libcurlu_la-parsedate.lo [ 595s] CC libcurlu_la-pingpong.lo [ 595s] CC libcurlu_la-pop3.lo [ 596s] CC libcurlu_la-progress.lo [ 597s] CC libcurlu_la-psl.lo [ 597s] CC libcurlu_la-rand.lo [ 597s] CC libcurlu_la-rename.lo [ 603s] CC libcurlu_la-rtsp.lo [ 604s] CC libcurlu_la-select.lo [ 605s] CC libcurlu_la-sendf.lo [ 605s] CC libcurlu_la-setopt.lo [ 606s] CC libcurlu_la-sha256.lo [ 606s] CC libcurlu_la-share.lo [ 606s] CC libcurlu_la-slist.lo [ 606s] CC libcurlu_la-smb.lo [ 613s] CC libcurlu_la-smtp.lo [ 614s] CC libcurlu_la-socketpair.lo [ 614s] sendf.c: In function 'Curl_write': [ 614s] sendf.c:322:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 614s] 322 | u_int32_t destination_ipv4 = 0; [ 614s] | ^~~~~~~~~ [ 614s] CC libcurlu_la-socks.lo [ 615s] CC libcurlu_la-socks_gssapi.lo [ 615s] CC libcurlu_la-socks_sspi.lo [ 615s] CC libcurlu_la-speedcheck.lo [ 615s] CC libcurlu_la-splay.lo [ 616s] CC libcurlu_la-strcase.lo [ 623s] CC libcurlu_la-strdup.lo [ 623s] CC libcurlu_la-strerror.lo [ 624s] CC libcurlu_la-strtok.lo [ 624s] CC libcurlu_la-strtoofft.lo [ 625s] CC libcurlu_la-system_win32.lo [ 625s] CC libcurlu_la-telnet.lo [ 625s] CC libcurlu_la-tftp.lo [ 625s] CC libcurlu_la-timeval.lo [ 632s] CC libcurlu_la-transfer.lo [ 633s] CC libcurlu_la-url.lo [ 633s] CC libcurlu_la-urlapi.lo [ 634s] CC libcurlu_la-version.lo [ 634s] CC libcurlu_la-version_win32.lo [ 634s] CC libcurlu_la-warnless.lo [ 635s] CC libcurlu_la-wildcard.lo [ 635s] CC libcurlu_la-x509asn1.lo [ 642s] url.c: In function 'Curl_idnconvert_hostname': [ 642s] url.c:1661:5: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 642s] 1661 | UErrorCode errorCode = U_ZERO_ERROR; [ 642s] | ^~~~~~~~~~ [ 643s] CC vauth/libcurlu_la-cleartext.lo [ 643s] CC vauth/libcurlu_la-cram.lo [ 643s] CC vauth/libcurlu_la-digest.lo [ 643s] CC vauth/libcurlu_la-digest_sspi.lo [ 644s] CC vauth/libcurlu_la-gsasl.lo [ 644s] CC vauth/libcurlu_la-krb5_gssapi.lo [ 644s] CC vauth/libcurlu_la-krb5_sspi.lo [ 644s] CC vauth/libcurlu_la-ntlm.lo [ 652s] CC vauth/libcurlu_la-ntlm_sspi.lo [ 653s] CC vauth/libcurlu_la-oauth2.lo [ 653s] CC vauth/libcurlu_la-spnego_gssapi.lo [ 653s] CC vauth/libcurlu_la-spnego_sspi.lo [ 653s] CC vauth/libcurlu_la-vauth.lo [ 653s] CC vtls/libcurlu_la-bearssl.lo [ 654s] CC vtls/libcurlu_la-gskit.lo [ 654s] CC vtls/libcurlu_la-gtls.lo [ 661s] CC vtls/libcurlu_la-keylog.lo [ 662s] CC vtls/libcurlu_la-mbedtls.lo [ 662s] CC vtls/libcurlu_la-mbedtls_threadlock.lo [ 662s] CC vtls/libcurlu_la-mesalink.lo [ 663s] CC vtls/libcurlu_la-nss.lo [ 663s] CC vtls/libcurlu_la-openssl.lo [ 663s] CC vtls/libcurlu_la-rustls.lo [ 663s] CC vtls/libcurlu_la-schannel.lo [ 671s] CC vtls/libcurlu_la-schannel_verify.lo [ 671s] CC vtls/libcurlu_la-sectransp.lo [ 672s] CC vtls/libcurlu_la-vtls.lo [ 672s] CC vtls/libcurlu_la-wolfssl.lo [ 672s] CC vquic/libcurlu_la-ngtcp2.lo [ 672s] CC vquic/libcurlu_la-quiche.lo [ 672s] CC vquic/libcurlu_la-vquic.lo [ 674s] CC vssh/libcurlu_la-libssh.lo [ 680s] CC vssh/libcurlu_la-libssh2.lo [ 681s] CC vssh/libcurlu_la-wolfssh.lo [ 681s] CC extensions/libcurlu_la-curl_extensions.lo [ 681s] RUN checksrc [ 682s] CC vauth/libcurl_la-cleartext.lo [ 682s] CC vauth/libcurl_la-cram.lo [ 682s] CC vauth/libcurl_la-digest.lo [ 683s] CC vauth/libcurl_la-digest_sspi.lo [ 689s] CC vauth/libcurl_la-gsasl.lo [ 690s] extensions/curl_extensions.c:35:13: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 690s] 35 | static void curl_extensions_init() [ 690s] | ^~~~~~~~~~~~~~~~~~~~ [ 690s] extensions/curl_extensions.c: In function 'curl_extensions_init': [ 690s] extensions/curl_extensions.c:35:13: warning: old-style function definition [-Wold-style-definition] [ 690s] extensions/curl_extensions.c:39:26: warning: ISO C forbids conversion of object pointer to function pointer type [-Wpedantic] [ 690s] 39 | dlp_check_leak = (dlp_check_leak_t) dlsym(handle, "dlp_check_leak"); [ 690s] | ^ [ 690s] CC vauth/libcurl_la-krb5_gssapi.lo [ 690s] CC vauth/libcurl_la-krb5_sspi.lo [ 691s] CC vauth/libcurl_la-ntlm.lo [ 691s] CC vauth/libcurl_la-ntlm_sspi.lo [ 692s] CC vauth/libcurl_la-oauth2.lo [ 692s] CC vauth/libcurl_la-spnego_gssapi.lo [ 699s] CC vauth/libcurl_la-spnego_sspi.lo [ 699s] CC vauth/libcurl_la-vauth.lo [ 699s] CC vtls/libcurl_la-bearssl.lo [ 701s] CC vtls/libcurl_la-gskit.lo [ 701s] CC vtls/libcurl_la-gtls.lo [ 701s] CC vtls/libcurl_la-keylog.lo [ 702s] CC vtls/libcurl_la-mbedtls.lo [ 708s] CC vtls/libcurl_la-mbedtls_threadlock.lo [ 709s] CC vtls/libcurl_la-mesalink.lo [ 709s] CC vtls/libcurl_la-nss.lo [ 710s] CC vtls/libcurl_la-openssl.lo [ 710s] CC vtls/libcurl_la-rustls.lo [ 710s] CC vtls/libcurl_la-schannel.lo [ 711s] CC vtls/libcurl_la-schannel_verify.lo [ 718s] CC vtls/libcurl_la-sectransp.lo [ 718s] CC vtls/libcurl_la-vtls.lo [ 718s] CC vtls/libcurl_la-wolfssl.lo [ 720s] CC vquic/libcurl_la-ngtcp2.lo [ 720s] CC vquic/libcurl_la-quiche.lo [ 721s] CC vquic/libcurl_la-vquic.lo [ 722s] CC vssh/libcurl_la-libssh.lo [ 722s] CC vssh/libcurl_la-libssh2.lo [ 727s] CC vssh/libcurl_la-wolfssh.lo [ 728s] CC extensions/libcurl_la-curl_extensions.lo [ 728s] CCLD libcurlu.la [ 735s] extensions/curl_extensions.c:35:13: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 735s] 35 | static void curl_extensions_init() [ 735s] | ^~~~~~~~~~~~~~~~~~~~ [ 735s] extensions/curl_extensions.c: In function 'curl_extensions_init': [ 735s] extensions/curl_extensions.c:35:13: warning: old-style function definition [-Wold-style-definition] [ 735s] extensions/curl_extensions.c:39:26: warning: ISO C forbids conversion of object pointer to function pointer type [-Wpedantic] [ 735s] 39 | dlp_check_leak = (dlp_check_leak_t) dlsym(handle, "dlp_check_leak"); [ 735s] | ^ [ 736s] CCLD libcurl.la [ 766s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 766s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 766s] Making all in src [ 766s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 766s] Making all in ../docs [ 766s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 767s] Making all in . [ 767s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 767s] make[3]: Nothing to be done for 'all-am'. [ 767s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 767s] Making all in cmdline-opts [ 767s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 767s] make[3]: Nothing to be done for 'all'. [ 767s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 767s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 767s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 767s] CC tool_bname.o [ 767s] CC tool_binmode.o [ 767s] CC slist_wc.o [ 767s] CC tool_cb_dbg.o [ 767s] CC tool_cb_hdr.o [ 767s] CC tool_cb_prg.o [ 767s] CC tool_cb_rea.o [ 767s] CC tool_cb_see.o [ 767s] CC tool_cb_wrt.o [ 767s] CC tool_cfgable.o [ 767s] CC tool_convert.o [ 767s] CC tool_dirhie.o [ 767s] CC tool_doswin.o [ 767s] CC tool_easysrc.o [ 767s] CC tool_filetime.o [ 767s] CC tool_findfile.o [ 767s] CC tool_formparse.o [ 767s] CC tool_getparam.o [ 767s] CC tool_helpers.o [ 767s] CC tool_help.o [ 767s] CC tool_getpass.o [ 767s] CC tool_hugehelp.o [ 767s] CC tool_libinfo.o [ 767s] CC tool_listhelp.o [ 767s] CC tool_main.o [ 767s] CC tool_msgs.o [ 767s] CC tool_operate.o [ 768s] CC tool_operhlp.o [ 768s] CC tool_panykey.o [ 768s] CC tool_paramhlp.o [ 768s] CC tool_parsecfg.o [ 768s] CC tool_progress.o [ 768s] CC tool_strdup.o [ 768s] CC tool_setopt.o [ 768s] CC tool_sleep.o [ 768s] CC tool_urlglob.o [ 768s] CC tool_util.o [ 768s] CC tool_vms.o [ 768s] CC tool_writeout.o [ 768s] CC tool_writeout_json.o [ 768s] CC tool_xattr.o [ 768s] CC libcurltool_la-slist_wc.lo [ 768s] CC libcurltool_la-tool_binmode.lo [ 768s] CC libcurltool_la-tool_bname.lo [ 768s] CC libcurltool_la-tool_cb_dbg.lo [ 768s] CC libcurltool_la-tool_cb_hdr.lo [ 769s] CC libcurltool_la-tool_cb_prg.lo [ 769s] CC libcurltool_la-tool_cb_rea.lo [ 770s] CC libcurltool_la-tool_cb_see.lo [ 778s] CC libcurltool_la-tool_cb_wrt.lo [ 778s] CC libcurltool_la-tool_cfgable.lo [ 778s] CC libcurltool_la-tool_convert.lo [ 778s] CC libcurltool_la-tool_dirhie.lo [ 778s] CC libcurltool_la-tool_doswin.lo [ 778s] CC libcurltool_la-tool_easysrc.lo [ 778s] CC libcurltool_la-tool_filetime.lo [ 779s] CC libcurltool_la-tool_findfile.lo [ 787s] CC libcurltool_la-tool_formparse.lo [ 787s] CC libcurltool_la-tool_getparam.lo [ 787s] CC libcurltool_la-tool_getpass.lo [ 787s] CC libcurltool_la-tool_help.lo [ 787s] CC libcurltool_la-tool_helpers.lo [ 787s] CC libcurltool_la-tool_hugehelp.lo [ 788s] CC libcurltool_la-tool_libinfo.lo [ 789s] CC libcurltool_la-tool_listhelp.lo [ 797s] CC libcurltool_la-tool_main.lo [ 797s] CC libcurltool_la-tool_msgs.lo [ 797s] CC libcurltool_la-tool_operate.lo [ 797s] CC libcurltool_la-tool_operhlp.lo [ 797s] CC libcurltool_la-tool_panykey.lo [ 797s] CC libcurltool_la-tool_paramhlp.lo [ 798s] CC libcurltool_la-tool_parsecfg.lo [ 798s] CC libcurltool_la-tool_progress.lo [ 806s] CC libcurltool_la-tool_strdup.lo [ 806s] CC libcurltool_la-tool_setopt.lo [ 806s] CC libcurltool_la-tool_sleep.lo [ 806s] CC libcurltool_la-tool_urlglob.lo [ 807s] CC libcurltool_la-tool_util.lo [ 808s] CC libcurltool_la-tool_vms.lo [ 808s] CC libcurltool_la-tool_writeout.lo [ 809s] CC libcurltool_la-tool_writeout_json.lo [ 815s] CC libcurltool_la-tool_xattr.lo [ 816s] CC ../lib/libcurltool_la-strtoofft.lo [ 816s] CC ../lib/libcurltool_la-nonblock.lo [ 816s] CC ../lib/libcurltool_la-warnless.lo [ 816s] CC ../lib/libcurltool_la-curl_ctype.lo [ 817s] CC ../lib/libcurltool_la-curl_multibyte.lo [ 817s] CC ../lib/libcurltool_la-version_win32.lo [ 818s] CC ../lib/libcurltool_la-dynbuf.lo [ 825s] RUN checksrc [ 825s] CC ../lib/strtoofft.o [ 825s] CC ../lib/nonblock.o [ 825s] CC ../lib/warnless.o [ 825s] CC ../lib/curl_ctype.o [ 825s] CC ../lib/curl_multibyte.o [ 826s] CC ../lib/dynbuf.o [ 826s] CC ../lib/version_win32.o [ 826s] CCLD curl [ 827s] CCLD libcurltool.la [ 838s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 838s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 838s] Making all in extensions [ 838s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/extensions' [ 838s] CC dlp.lo [ 844s] dlp.c:30:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 844s] 30 | typedef void (*privacy_guard_dlp_init_t)(); [ 844s] | ^~~~~~~ [ 844s] dlp.c:38:13: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 844s] 38 | static void dlp_init() [ 844s] | ^~~~~~~~ [ 844s] dlp.c: In function 'dlp_init': [ 844s] dlp.c:38:13: warning: old-style function definition [-Wold-style-definition] [ 844s] dlp.c:43:7: warning: ISO C forbids conversion of object pointer to function pointer type [-Wpedantic] [ 844s] 43 | (privacy_guard_dlp_init_t) dlsym(handle, "privacy_guard_dlp_init"); [ 844s] | ^ [ 844s] dlp.c:45:7: warning: ISO C forbids conversion of object pointer to function pointer type [-Wpedantic] [ 844s] 45 | (privacy_guard_dlp_check_leak_proto_info_t) dlsym(handle, "privacy_guard_dlp_check_leak_proto_info"); [ 844s] | ^ [ 844s] CCLD libcurl_extension_dlp.la [ 850s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/extensions' [ 850s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 850s] make[1]: Nothing to be done for 'all-am'. [ 850s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 850s] + exit 0 [ 850s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.s0SBwF [ 850s] + umask 022 [ 850s] + cd /home/abuild/rpmbuild/BUILD [ 850s] + cd curl-7.81.0 [ 850s] + LANG=C [ 850s] + export LANG [ 850s] + unset DISPLAY [ 850s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 850s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 850s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 850s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 850s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm 'INSTALL=/bin/install -p' install [ 850s] Making install in lib [ 850s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 851s] RUN checksrc [ 873s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 873s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib' [ 873s] /bin/sh ../libtool --mode=install /bin/install -p libcurl.la '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib' [ 874s] libtool: install: /bin/install -p .libs/libcurl.so.4.7.0 /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl.so.4.7.0 [ 874s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib && { ln -s -f libcurl.so.4.7.0 libcurl.so.4 || { rm -f libcurl.so.4 && ln -s libcurl.so.4.7.0 libcurl.so.4; }; }) [ 874s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib && { ln -s -f libcurl.so.4.7.0 libcurl.so || { rm -f libcurl.so && ln -s libcurl.so.4.7.0 libcurl.so; }; }) [ 874s] libtool: install: /bin/install -p .libs/libcurl.lai /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl.la [ 874s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 874s] make[2]: Nothing to be done for 'install-data-am'. [ 874s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 874s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/lib' [ 874s] Making install in src [ 874s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 874s] Making install in ../docs [ 874s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 874s] Making install in . [ 874s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 874s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 874s] make[4]: Nothing to be done for 'install-exec-am'. [ 874s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man1' [ 875s] /bin/install -p -m 644 curl-config.1 /home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/curl.1 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man1' [ 875s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 875s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 875s] Making install in cmdline-opts [ 875s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 875s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 875s] make[4]: Nothing to be done for 'install-exec-am'. [ 875s] make[4]: Nothing to be done for 'install-data-am'. [ 875s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 875s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 875s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 875s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 875s] RUN checksrc [ 878s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 878s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/bin' [ 878s] /bin/sh ../libtool --mode=install /bin/install -p curl '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/bin' [ 879s] libtool: warning: '../lib/libcurl.la' has not been installed in '/usr/lib' [ 879s] libtool: install: /bin/install -p .libs/curl /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/bin/curl [ 879s] make[3]: Nothing to be done for 'install-data-am'. [ 879s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 879s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 879s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/src' [ 879s] Making install in extensions [ 879s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/extensions' [ 879s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/extensions' [ 879s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib' [ 879s] /bin/sh ../libtool --mode=install /bin/install -p libcurl_extension_dlp.la '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib' [ 880s] libtool: install: /bin/install -p .libs/libcurl_extension_dlp.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl_extension_dlp.so.0.0.0 [ 880s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib && { ln -s -f libcurl_extension_dlp.so.0.0.0 libcurl_extension_dlp.so.0 || { rm -f libcurl_extension_dlp.so.0 && ln -s libcurl_extension_dlp.so.0.0.0 libcurl_extension_dlp.so.0; }; }) [ 880s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib && { ln -s -f libcurl_extension_dlp.so.0.0.0 libcurl_extension_dlp.so || { rm -f libcurl_extension_dlp.so && ln -s libcurl_extension_dlp.so.0.0.0 libcurl_extension_dlp.so; }; }) [ 880s] libtool: install: /bin/install -p .libs/libcurl_extension_dlp.lai /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl_extension_dlp.la [ 880s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 880s] make[2]: Nothing to be done for 'install-data-am'. [ 880s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/extensions' [ 880s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/extensions' [ 880s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 880s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 880s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/bin' [ 880s] /bin/install -p curl-config '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/bin' [ 880s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/pkgconfig' [ 880s] /bin/install -p -m 644 libcurl.pc '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/pkgconfig' [ 880s] make install-data-hook [ 880s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 880s] (cd include && make install) [ 880s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include' [ 880s] Making install in curl [ 880s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include/curl' [ 880s] RUN checksrc [ 881s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include/curl' [ 881s] make[6]: Nothing to be done for 'install-exec-am'. [ 881s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/include/curl' [ 881s] /bin/install -p -m 644 curl.h curlver.h easy.h mprintf.h stdcheaders.h multi.h typecheck-gcc.h system.h urlapi.h options.h '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/include/curl' [ 881s] make[6]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include/curl' [ 881s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include/curl' [ 881s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include' [ 881s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include' [ 881s] make[6]: Nothing to be done for 'install-exec-am'. [ 881s] make[6]: Nothing to be done for 'install-data-am'. [ 881s] make[6]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include' [ 881s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include' [ 881s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/include' [ 881s] (cd docs && make install) [ 881s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 881s] Making install in . [ 881s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 881s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 881s] make[6]: Nothing to be done for 'install-exec-am'. [ 882s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man1' [ 882s] /bin/install -p -m 644 curl-config.1 /home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/curl.1 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man1' [ 882s] make[6]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 882s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 882s] Making install in cmdline-opts [ 882s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 882s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 882s] make[6]: Nothing to be done for 'install-exec-am'. [ 882s] make[6]: Nothing to be done for 'install-data-am'. [ 882s] make[6]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 882s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/cmdline-opts' [ 882s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs' [ 882s] (cd docs/libcurl && make install) [ 882s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl' [ 882s] Making install in opts [ 882s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl/opts' [ 882s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl/opts' [ 882s] make[6]: Nothing to be done for 'install-exec-am'. [ 882s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 884s] /bin/install -p -m 644 CURLINFO_ACTIVESOCKET.3 CURLINFO_APPCONNECT_TIME.3 CURLINFO_APPCONNECT_TIME_T.3 CURLINFO_CERTINFO.3 CURLINFO_CONDITION_UNMET.3 CURLINFO_CONNECT_TIME.3 CURLINFO_CONNECT_TIME_T.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 CURLINFO_CONTENT_LENGTH_UPLOAD.3 CURLINFO_CONTENT_LENGTH_UPLOAD_T.3 CURLINFO_CONTENT_TYPE.3 CURLINFO_COOKIELIST.3 CURLINFO_EFFECTIVE_METHOD.3 CURLINFO_EFFECTIVE_URL.3 CURLINFO_FILETIME.3 CURLINFO_FILETIME_T.3 CURLINFO_FTP_ENTRY_PATH.3 CURLINFO_HEADER_SIZE.3 CURLINFO_HTTPAUTH_AVAIL.3 CURLINFO_HTTP_CONNECTCODE.3 CURLINFO_HTTP_VERSION.3 CURLINFO_LASTSOCKET.3 CURLINFO_LOCAL_IP.3 CURLINFO_LOCAL_PORT.3 CURLINFO_NAMELOOKUP_TIME.3 CURLINFO_NAMELOOKUP_TIME_T.3 CURLINFO_NUM_CONNECTS.3 CURLINFO_OS_ERRNO.3 CURLINFO_PRETRANSFER_TIME.3 CURLINFO_PRETRANSFER_TIME_T.3 CURLINFO_PRIMARY_IP.3 CURLINFO_PRIMARY_PORT.3 CURLINFO_PRIVATE.3 CURLINFO_PROTOCOL.3 CURLINFO_PROXY_ERROR.3 CURLINFO_PROXY_SSL_VERIFYRESULT.3 CURLINFO_PROXYAUTH_AVAIL.3 CURLINFO_REDIRECT_COUNT.3 CURLINFO_REDIRECT_TIME.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 884s] /bin/install -p -m 644 CURLINFO_REDIRECT_TIME_T.3 CURLINFO_REDIRECT_URL.3 CURLINFO_REFERER.3 CURLINFO_REQUEST_SIZE.3 CURLINFO_RESPONSE_CODE.3 CURLINFO_RETRY_AFTER.3 CURLINFO_RTSP_CLIENT_CSEQ.3 CURLINFO_RTSP_CSEQ_RECV.3 CURLINFO_RTSP_SERVER_CSEQ.3 CURLINFO_RTSP_SESSION_ID.3 CURLINFO_SCHEME.3 CURLINFO_SIZE_DOWNLOAD.3 CURLINFO_SIZE_DOWNLOAD_T.3 CURLINFO_SIZE_UPLOAD.3 CURLINFO_SIZE_UPLOAD_T.3 CURLINFO_SPEED_DOWNLOAD.3 CURLINFO_SPEED_DOWNLOAD_T.3 CURLINFO_SPEED_UPLOAD.3 CURLINFO_SPEED_UPLOAD_T.3 CURLINFO_SSL_ENGINES.3 CURLINFO_SSL_VERIFYRESULT.3 CURLINFO_STARTTRANSFER_TIME.3 CURLINFO_STARTTRANSFER_TIME_T.3 CURLINFO_TLS_SESSION.3 CURLINFO_TLS_SSL_PTR.3 CURLINFO_TOTAL_TIME.3 CURLINFO_TOTAL_TIME_T.3 CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE.3 CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE.3 CURLMOPT_MAXCONNECTS.3 CURLMOPT_MAX_CONCURRENT_STREAMS.3 CURLMOPT_MAX_HOST_CONNECTIONS.3 CURLMOPT_MAX_PIPELINE_LENGTH.3 CURLMOPT_MAX_TOTAL_CONNECTIONS.3 CURLMOPT_PIPELINING.3 CURLMOPT_PIPELINING_SERVER_BL.3 CURLMOPT_PIPELINING_SITE_BL.3 CURLMOPT_PUSHDATA.3 CURLMOPT_PUSHFUNCTION.3 CURLMOPT_SOCKETDATA.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 884s] /bin/install -p -m 644 CURLMOPT_SOCKETFUNCTION.3 CURLMOPT_TIMERDATA.3 CURLMOPT_TIMERFUNCTION.3 CURLOPT_ABSTRACT_UNIX_SOCKET.3 CURLOPT_ACCEPTTIMEOUT_MS.3 CURLOPT_ACCEPT_ENCODING.3 CURLOPT_ADDRESS_SCOPE.3 CURLOPT_ALTSVC.3 CURLOPT_ALTSVC_CTRL.3 CURLOPT_APPEND.3 CURLOPT_AUTOREFERER.3 CURLOPT_BUFFERSIZE.3 CURLOPT_CAINFO.3 CURLOPT_CAINFO_BLOB.3 CURLOPT_CAPATH.3 CURLOPT_CERTINFO.3 CURLOPT_CHUNK_BGN_FUNCTION.3 CURLOPT_CHUNK_DATA.3 CURLOPT_CHUNK_END_FUNCTION.3 CURLOPT_CLOSESOCKETDATA.3 CURLOPT_CLOSESOCKETFUNCTION.3 CURLOPT_CONNECTTIMEOUT.3 CURLOPT_CONNECTTIMEOUT_MS.3 CURLOPT_CONNECT_ONLY.3 CURLOPT_CONNECT_TO.3 CURLOPT_CONV_FROM_NETWORK_FUNCTION.3 CURLOPT_CONV_FROM_UTF8_FUNCTION.3 CURLOPT_CONV_TO_NETWORK_FUNCTION.3 CURLOPT_COOKIE.3 CURLOPT_COOKIEFILE.3 CURLOPT_COOKIEJAR.3 CURLOPT_COOKIELIST.3 CURLOPT_COOKIESESSION.3 CURLOPT_COPYPOSTFIELDS.3 CURLOPT_CRLF.3 CURLOPT_CRLFILE.3 CURLOPT_CURLU.3 CURLOPT_CUSTOMREQUEST.3 CURLOPT_DEBUGDATA.3 CURLOPT_DEBUGFUNCTION.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 884s] /bin/install -p -m 644 CURLOPT_DEFAULT_PROTOCOL.3 CURLOPT_DIRLISTONLY.3 CURLOPT_DISALLOW_USERNAME_IN_URL.3 CURLOPT_DNS_CACHE_TIMEOUT.3 CURLOPT_DNS_INTERFACE.3 CURLOPT_DNS_LOCAL_IP4.3 CURLOPT_DNS_LOCAL_IP6.3 CURLOPT_DNS_SERVERS.3 CURLOPT_DNS_SHUFFLE_ADDRESSES.3 CURLOPT_DNS_USE_GLOBAL_CACHE.3 CURLOPT_DOH_SSL_VERIFYHOST.3 CURLOPT_DOH_SSL_VERIFYPEER.3 CURLOPT_DOH_SSL_VERIFYSTATUS.3 CURLOPT_DOH_URL.3 CURLOPT_EGDSOCKET.3 CURLOPT_ERRORBUFFER.3 CURLOPT_EXPECT_100_TIMEOUT_MS.3 CURLOPT_FAILONERROR.3 CURLOPT_FILETIME.3 CURLOPT_FNMATCH_DATA.3 CURLOPT_FNMATCH_FUNCTION.3 CURLOPT_FOLLOWLOCATION.3 CURLOPT_FORBID_REUSE.3 CURLOPT_FRESH_CONNECT.3 CURLOPT_FTPPORT.3 CURLOPT_FTPSSLAUTH.3 CURLOPT_FTP_ACCOUNT.3 CURLOPT_FTP_ALTERNATIVE_TO_USER.3 CURLOPT_FTP_CREATE_MISSING_DIRS.3 CURLOPT_FTP_FILEMETHOD.3 CURLOPT_FTP_RESPONSE_TIMEOUT.3 CURLOPT_FTP_SKIP_PASV_IP.3 CURLOPT_FTP_SSL_CCC.3 CURLOPT_FTP_USE_EPRT.3 CURLOPT_FTP_USE_EPSV.3 CURLOPT_FTP_USE_PRET.3 CURLOPT_GSSAPI_DELEGATION.3 CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.3 CURLOPT_HAPROXYPROTOCOL.3 CURLOPT_HEADER.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 884s] /bin/install -p -m 644 CURLOPT_HEADERDATA.3 CURLOPT_HEADERFUNCTION.3 CURLOPT_HEADEROPT.3 CURLOPT_HSTS.3 CURLOPT_HSTSREADDATA.3 CURLOPT_HSTSREADFUNCTION.3 CURLOPT_HSTSWRITEDATA.3 CURLOPT_HSTSWRITEFUNCTION.3 CURLOPT_HSTS_CTRL.3 CURLOPT_HTTP09_ALLOWED.3 CURLOPT_HTTP200ALIASES.3 CURLOPT_HTTPAUTH.3 CURLOPT_HTTPGET.3 CURLOPT_HTTPHEADER.3 CURLOPT_HTTPPOST.3 CURLOPT_HTTPPROXYTUNNEL.3 CURLOPT_HTTP_CONTENT_DECODING.3 CURLOPT_HTTP_TRANSFER_DECODING.3 CURLOPT_HTTP_VERSION.3 CURLOPT_IGNORE_CONTENT_LENGTH.3 CURLOPT_INFILESIZE.3 CURLOPT_INFILESIZE_LARGE.3 CURLOPT_INTERFACE.3 CURLOPT_INTERLEAVEDATA.3 CURLOPT_INTERLEAVEFUNCTION.3 CURLOPT_IOCTLDATA.3 CURLOPT_IOCTLFUNCTION.3 CURLOPT_IPRESOLVE.3 CURLOPT_ISSUERCERT.3 CURLOPT_ISSUERCERT_BLOB.3 CURLOPT_KEEP_SENDING_ON_ERROR.3 CURLOPT_KEYPASSWD.3 CURLOPT_KRBLEVEL.3 CURLOPT_LOCALPORT.3 CURLOPT_LOCALPORTRANGE.3 CURLOPT_LOGIN_OPTIONS.3 CURLOPT_LOW_SPEED_LIMIT.3 CURLOPT_LOW_SPEED_TIME.3 CURLOPT_MAIL_AUTH.3 CURLOPT_MAIL_FROM.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 CURLOPT_MAIL_RCPT.3 CURLOPT_MAIL_RCPT_ALLLOWFAILS.3 CURLOPT_MAXAGE_CONN.3 CURLOPT_MAXCONNECTS.3 CURLOPT_MAXFILESIZE.3 CURLOPT_MAXFILESIZE_LARGE.3 CURLOPT_MAXLIFETIME_CONN.3 CURLOPT_MAXREDIRS.3 CURLOPT_MAX_RECV_SPEED_LARGE.3 CURLOPT_MAX_SEND_SPEED_LARGE.3 CURLOPT_MIMEPOST.3 CURLOPT_MIME_OPTIONS.3 CURLOPT_NETRC.3 CURLOPT_NETRC_FILE.3 CURLOPT_NEW_DIRECTORY_PERMS.3 CURLOPT_NEW_FILE_PERMS.3 CURLOPT_NOBODY.3 CURLOPT_NOPROGRESS.3 CURLOPT_NOPROXY.3 CURLOPT_NOSIGNAL.3 CURLOPT_OPENSOCKETDATA.3 CURLOPT_OPENSOCKETFUNCTION.3 CURLOPT_PASSWORD.3 CURLOPT_PATH_AS_IS.3 CURLOPT_PINNEDPUBLICKEY.3 CURLOPT_PIPEWAIT.3 CURLOPT_PORT.3 CURLOPT_POST.3 CURLOPT_POSTFIELDS.3 CURLOPT_POSTFIELDSIZE.3 CURLOPT_POSTFIELDSIZE_LARGE.3 CURLOPT_POSTQUOTE.3 CURLOPT_POSTREDIR.3 CURLOPT_PREQUOTE.3 CURLOPT_PREREQDATA.3 CURLOPT_PREREQFUNCTION.3 CURLOPT_PRE_PROXY.3 CURLOPT_PRIVATE.3 CURLOPT_PROGRESSDATA.3 CURLOPT_PROGRESSFUNCTION.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 CURLOPT_PROTOCOLS.3 CURLOPT_PROXY.3 CURLOPT_PROXYAUTH.3 CURLOPT_PROXYHEADER.3 CURLOPT_PROXYPASSWORD.3 CURLOPT_PROXYPORT.3 CURLOPT_PROXYTYPE.3 CURLOPT_PROXYUSERNAME.3 CURLOPT_PROXYUSERPWD.3 CURLOPT_PROXY_CAINFO.3 CURLOPT_PROXY_CAINFO_BLOB.3 CURLOPT_PROXY_CAPATH.3 CURLOPT_PROXY_CRLFILE.3 CURLOPT_PROXY_KEYPASSWD.3 CURLOPT_PROXY_ISSUERCERT.3 CURLOPT_PROXY_ISSUERCERT_BLOB.3 CURLOPT_PROXY_PINNEDPUBLICKEY.3 CURLOPT_PROXY_SERVICE_NAME.3 CURLOPT_PROXY_SSLCERT.3 CURLOPT_PROXY_SSLCERT_BLOB.3 CURLOPT_PROXY_SSLCERTTYPE.3 CURLOPT_PROXY_SSLKEY.3 CURLOPT_PROXY_SSLKEY_BLOB.3 CURLOPT_PROXY_SSLKEYTYPE.3 CURLOPT_PROXY_SSLVERSION.3 CURLOPT_PROXY_SSL_CIPHER_LIST.3 CURLOPT_PROXY_SSL_OPTIONS.3 CURLOPT_PROXY_SSL_VERIFYHOST.3 CURLOPT_PROXY_SSL_VERIFYPEER.3 CURLOPT_PROXY_TLS13_CIPHERS.3 CURLOPT_PROXY_TLSAUTH_PASSWORD.3 CURLOPT_PROXY_TLSAUTH_TYPE.3 CURLOPT_PROXY_TLSAUTH_USERNAME.3 CURLOPT_PROXY_TRANSFER_MODE.3 CURLOPT_PUT.3 CURLOPT_QUOTE.3 CURLOPT_RANDOM_FILE.3 CURLOPT_RANGE.3 CURLOPT_READDATA.3 CURLOPT_READFUNCTION.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 CURLOPT_REDIR_PROTOCOLS.3 CURLOPT_REFERER.3 CURLOPT_REQUEST_TARGET.3 CURLOPT_RESOLVE.3 CURLOPT_RESOLVER_START_DATA.3 CURLOPT_RESOLVER_START_FUNCTION.3 CURLOPT_RESUME_FROM.3 CURLOPT_RESUME_FROM_LARGE.3 CURLOPT_RTSP_CLIENT_CSEQ.3 CURLOPT_RTSP_REQUEST.3 CURLOPT_RTSP_SERVER_CSEQ.3 CURLOPT_RTSP_SESSION_ID.3 CURLOPT_RTSP_STREAM_URI.3 CURLOPT_RTSP_TRANSPORT.3 CURLOPT_SASL_AUTHZID.3 CURLOPT_SASL_IR.3 CURLOPT_SEEKDATA.3 CURLOPT_SEEKFUNCTION.3 CURLOPT_SERVICE_NAME.3 CURLOPT_SHARE.3 CURLOPT_SOCKOPTDATA.3 CURLOPT_SOCKOPTFUNCTION.3 CURLOPT_SOCKS5_AUTH.3 CURLOPT_SOCKS5_GSSAPI_NEC.3 CURLOPT_SOCKS5_GSSAPI_SERVICE.3 CURLOPT_SSH_AUTH_TYPES.3 CURLOPT_SSH_COMPRESSION.3 CURLOPT_SSH_HOST_PUBLIC_KEY_MD5.3 CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256.3 CURLOPT_SSH_KEYDATA.3 CURLOPT_SSH_KEYFUNCTION.3 CURLOPT_SSH_KNOWNHOSTS.3 CURLOPT_SSH_PRIVATE_KEYFILE.3 CURLOPT_SSH_PUBLIC_KEYFILE.3 CURLOPT_SSLCERT.3 CURLOPT_SSLCERT_BLOB.3 CURLOPT_SSLCERTTYPE.3 CURLOPT_SSLENGINE.3 CURLOPT_SSLENGINE_DEFAULT.3 CURLOPT_SSLKEY.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 CURLOPT_SSLKEY_BLOB.3 CURLOPT_SSLKEYTYPE.3 CURLOPT_SSLVERSION.3 CURLOPT_SSL_CIPHER_LIST.3 CURLOPT_SSL_CTX_DATA.3 CURLOPT_SSL_CTX_FUNCTION.3 CURLOPT_SSL_EC_CURVES.3 CURLOPT_SSL_ENABLE_ALPN.3 CURLOPT_SSL_ENABLE_NPN.3 CURLOPT_SSL_FALSESTART.3 CURLOPT_SSL_OPTIONS.3 CURLOPT_SSL_SESSIONID_CACHE.3 CURLOPT_SSL_VERIFYHOST.3 CURLOPT_SSL_VERIFYPEER.3 CURLOPT_SSL_VERIFYSTATUS.3 CURLOPT_STDERR.3 CURLOPT_STREAM_DEPENDS.3 CURLOPT_STREAM_DEPENDS_E.3 CURLOPT_STREAM_WEIGHT.3 CURLOPT_SUPPRESS_CONNECT_HEADERS.3 CURLOPT_TCP_FASTOPEN.3 CURLOPT_TCP_KEEPALIVE.3 CURLOPT_TCP_KEEPIDLE.3 CURLOPT_TCP_KEEPINTVL.3 CURLOPT_TCP_NODELAY.3 CURLOPT_TELNETOPTIONS.3 CURLOPT_TFTP_BLKSIZE.3 CURLOPT_TFTP_NO_OPTIONS.3 CURLOPT_TIMECONDITION.3 CURLOPT_TIMEOUT.3 CURLOPT_TIMEOUT_MS.3 CURLOPT_TIMEVALUE.3 CURLOPT_TIMEVALUE_LARGE.3 CURLOPT_TLS13_CIPHERS.3 CURLOPT_TLSAUTH_PASSWORD.3 CURLOPT_TLSAUTH_TYPE.3 CURLOPT_TLSAUTH_USERNAME.3 CURLOPT_TRAILERDATA.3 CURLOPT_TRAILERFUNCTION.3 CURLOPT_TRANSFERTEXT.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 CURLOPT_TRANSFER_ENCODING.3 CURLOPT_UNIX_SOCKET_PATH.3 CURLOPT_UNRESTRICTED_AUTH.3 CURLOPT_UPKEEP_INTERVAL_MS.3 CURLOPT_UPLOAD.3 CURLOPT_UPLOAD_BUFFERSIZE.3 CURLOPT_URL.3 CURLOPT_USERAGENT.3 CURLOPT_USERNAME.3 CURLOPT_USERPWD.3 CURLOPT_USE_SSL.3 CURLOPT_AWS_SIGV4.3 CURLOPT_VERBOSE.3 CURLOPT_WILDCARDMATCH.3 CURLOPT_WRITEDATA.3 CURLOPT_WRITEFUNCTION.3 CURLOPT_XFERINFODATA.3 CURLOPT_XFERINFOFUNCTION.3 CURLOPT_XOAUTH2_BEARER.3 CURLSHOPT_LOCKFUNC.3 CURLSHOPT_SHARE.3 CURLSHOPT_UNLOCKFUNC.3 CURLSHOPT_UNSHARE.3 CURLSHOPT_USERDATA.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] make[6]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl/opts' [ 885s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl/opts' [ 885s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl' [ 885s] make[6]: Entering directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl' [ 885s] make[6]: Nothing to be done for 'install-exec-am'. [ 885s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/aclocal' [ 885s] /bin/install -p -m 644 libcurl.m4 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/aclocal' [ 885s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 curl_easy_cleanup.3 curl_easy_duphandle.3 curl_easy_escape.3 curl_easy_getinfo.3 curl_easy_init.3 curl_easy_option_by_id.3 curl_easy_option_by_name.3 curl_easy_option_next.3 curl_easy_pause.3 curl_easy_perform.3 curl_easy_recv.3 curl_easy_reset.3 curl_easy_send.3 curl_easy_setopt.3 curl_easy_strerror.3 curl_easy_unescape.3 curl_easy_upkeep.3 curl_escape.3 curl_formadd.3 curl_formfree.3 curl_formget.3 curl_free.3 curl_getdate.3 curl_getenv.3 curl_global_cleanup.3 curl_global_init.3 curl_global_init_mem.3 curl_global_sslset.3 curl_mime_addpart.3 curl_mime_data.3 curl_mime_data_cb.3 curl_mime_encoder.3 curl_mime_filedata.3 curl_mime_filename.3 curl_mime_free.3 curl_mime_headers.3 curl_mime_init.3 curl_mime_name.3 curl_mime_subparts.3 curl_mime_type.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 curl_mprintf.3 curl_multi_add_handle.3 curl_multi_assign.3 curl_multi_cleanup.3 curl_multi_fdset.3 curl_multi_info_read.3 curl_multi_init.3 curl_multi_perform.3 curl_multi_poll.3 curl_multi_remove_handle.3 curl_multi_setopt.3 curl_multi_socket.3 curl_multi_socket_action.3 curl_multi_socket_all.3 curl_multi_strerror.3 curl_multi_timeout.3 curl_multi_wakeup.3 curl_multi_wait.3 curl_share_cleanup.3 curl_share_init.3 curl_share_setopt.3 curl_share_strerror.3 curl_slist_append.3 curl_slist_free_all.3 curl_strequal.3 curl_strnequal.3 curl_unescape.3 curl_url.3 curl_url_cleanup.3 curl_url_dup.3 curl_url_get.3 curl_url_set.3 curl_url_strerror.3 curl_version.3 curl_version_info.3 libcurl-easy.3 libcurl-env.3 libcurl-errors.3 libcurl-multi.3 libcurl-security.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] /bin/install -p -m 644 libcurl-share.3 libcurl-symbols.3 libcurl-thread.3 libcurl-tutorial.3 libcurl-url.3 libcurl.3 '/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man/man3' [ 885s] make[6]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl' [ 885s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl' [ 885s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0/docs/libcurl' [ 885s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 885s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 885s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/curl-7.81.0' [ 885s] + rm -f /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl.la /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl_extension_dlp.la [ 885s] + install -d /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm//usr/share/aclocal [ 885s] + install -m 644 docs/libcurl/libcurl.m4 /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm//usr/share/aclocal [ 885s] + find /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm -name ca-bundle.crt -exec rm -f '{}' ';' [ 886s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/man [ 886s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 7.81.0-31.3 --unique-debug-src-base curl-7.81.0-31.3.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/curl-7.81.0 [ 886s] 1+0 records in [ 886s] 1+0 records out [ 886s] 1+0 records in [ 886s] 1+0 records out [ 886s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.00103601 s, 6.8 kB/s [ 886s] 1+0 records in [ 886s] 1+0 records out [ 886s] , 0.00103545 s, 6.8 kB/s [ 886s] 7 bytes (7 B) copied, 0.00106054 s, 6.6 kB/s [ 886s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/bin/curl [ 886s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl.so.4.7.0 [ 886s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/lib/libcurl_extension_dlp.so.0.0.0 [ 887s] 0+0 records in [ 887s] 0+0 records out [ 887s] 0 bytes (0 B) copied, 0.000694196 s, 0.0 kB/s [ 887s] 0+0 records in [ 887s] 0+0 records out [ 887s] 0 bytes (0 B) copied, 0.000763551 s, 0.0 kB/s [ 887s] 0+0 records in [ 887s] 0+0 records out [ 887s] 0 bytes (0 B) copied, 0.000778578 s, 0.0 kB/s [ 887s] 8182 blocks [ 887s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/curl-7.81.0/curl-debuginfo.manifest [ 887s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/curl-7.81.0/curl-debugsource.manifest [ 887s] + /usr/lib/rpm/check-buildroot [ 887s] + /usr/lib/rpm//brp-compress [ 887s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 889s] + /usr/lib/rpm/brp-python-hardlink [ 889s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 889s] Processing files: curl-7.81.0-31.3.armv7hl [ 889s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.KIr5KC [ 889s] + umask 022 [ 889s] + cd /home/abuild/rpmbuild/BUILD [ 889s] + cd curl-7.81.0 [ 889s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/curl [ 889s] + export LC_ALL=C [ 889s] + LC_ALL=C [ 889s] + export LICENSEDIR [ 889s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/curl [ 889s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/curl [ 889s] + exit 0 [ 889s] Provides: curl = 7.81.0-31.3 curl(armv7hl-32) = 7.81.0-31.3 webclient [ 889s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 889s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 889s] Processing files: curl-debugsource-7.81.0-31.3.armv7hl [ 889s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 889s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 889s] [ 890s] Provides: curl-debugsource = 7.81.0-31.3 curl-debugsource(armv7hl-32) = 7.81.0-31.3 [ 890s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 890s] Processing files: libcurl-7.81.0-31.3.armv7hl [ 890s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 890s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 890s] [ 890s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.8EvyjC [ 890s] + umask 022 [ 890s] + cd /home/abuild/rpmbuild/BUILD [ 890s] + cd curl-7.81.0 [ 890s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/libcurl [ 890s] + export LC_ALL=C [ 890s] + LC_ALL=C [ 890s] + export LICENSEDIR [ 890s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/libcurl [ 890s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/libcurl [ 890s] + exit 0 [ 890s] Provides: libcurl = 7.81.0-31.3 libcurl(armv7hl-32) = 7.81.0-31.3 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libcurl.so.4(HIDDEN) [ 890s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 890s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 890s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 890s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 890s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcares.so.2 libcrypto.so.1.1 libcrypto.so.1.1(OPENSSL_1_1_0) libdl.so.2 libdl.so.2(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libicudata.so.70 libicuuc.so.70 libnghttp2.so.14 libssl.so.1.1 libssl.so.1.1(OPENSSL_1_1_0) libssl.so.1.1(OPENSSL_1_1_1) libz.so.1 rtld(GNU_HASH) [ 890s] Processing files: libcurl-devel-7.81.0-31.3.armv7hl [ 891s] Provides: curl-devel = 7.81.0-31.3 libcurl-devel = 7.81.0-31.3 libcurl-devel(armv7hl-32) = 7.81.0-31.3 pkgconfig(libcurl) = 7.81.0 [ 891s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 891s] Requires: /bin/sh /usr/bin/pkg-config libcurl.so.4 [ 891s] Obsoletes: curl-devel < 7.81.0-31.3 [ 891s] Processing files: libcurl-extension-dlp-7.81.0-31.3.armv7hl [ 891s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 891s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 891s] [ 891s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.DV2UOC [ 891s] + umask 022 [ 891s] + cd /home/abuild/rpmbuild/BUILD [ 891s] + cd curl-7.81.0 [ 891s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/libcurl-extension-dlp [ 891s] + export LC_ALL=C [ 891s] + LC_ALL=C [ 891s] + export LICENSEDIR [ 891s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/libcurl-extension-dlp [ 891s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm/usr/share/licenses/libcurl-extension-dlp [ 891s] + exit 0 [ 891s] Provides: libcurl-extension-dlp = 7.81.0-31.3 libcurl-extension-dlp(armv7hl-32) = 7.81.0-31.3 libcurl_extension_dlp.so.0 [ 891s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 891s] Requires(post): /sbin/ldconfig [ 891s] Requires(postun): /sbin/ldconfig [ 891s] Requires: libcares.so.2 libcrypto.so.1.1 libdl.so.2 libdl.so.2(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libicudata.so.70 libicuuc.so.70 libnghttp2.so.14 libssl.so.1.1 libz.so.1 rtld(GNU_HASH) [ 891s] Processing files: curl-debuginfo-7.81.0-31.3.armv7hl [ 891s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 891s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 891s] [ 891s] Provides: curl-debuginfo = 7.81.0-31.3 curl-debuginfo(armv7hl-32) = 7.81.0-31.3 [ 891s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 891s] Recommends: curl-debugsource(armv7hl-32) = 7.81.0-31.3 [ 891s] Processing files: libcurl-debuginfo-7.81.0-31.3.armv7hl [ 891s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 891s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 891s] [ 891s] Provides: libcurl-debuginfo = 7.81.0-31.3 libcurl-debuginfo(armv7hl-32) = 7.81.0-31.3 [ 891s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 891s] Recommends: curl-debugsource(armv7hl-32) = 7.81.0-31.3 [ 891s] Processing files: libcurl-extension-dlp-debuginfo-7.81.0-31.3.armv7hl [ 891s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 891s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 891s] [ 891s] Provides: libcurl-extension-dlp-debuginfo = 7.81.0-31.3 libcurl-extension-dlp-debuginfo(armv7hl-32) = 7.81.0-31.3 [ 891s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 891s] Recommends: curl-debugsource(armv7hl-32) = 7.81.0-31.3 [ 891s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 891s] Wrote: /home/abuild/rpmbuild/SRPMS/curl-7.81.0-31.3.src.rpm [ 892s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/curl-7.81.0-31.3.armv7hl.rpm [ 894s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/curl-debugsource-7.81.0-31.3.armv7hl.rpm [ 894s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-7.81.0-31.3.armv7hl.rpm [ 894s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-devel-7.81.0-31.3.armv7hl.rpm [ 894s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-extension-dlp-7.81.0-31.3.armv7hl.rpm [ 895s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/curl-debuginfo-7.81.0-31.3.armv7hl.rpm [ 897s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-debuginfo-7.81.0-31.3.armv7hl.rpm [ 897s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-extension-dlp-debuginfo-7.81.0-31.3.armv7hl.rpm [ 897s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.uGovOC [ 897s] + umask 022 [ 897s] + cd /home/abuild/rpmbuild/BUILD [ 897s] + cd curl-7.81.0 [ 897s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/curl-7.81.0-31.3.arm [ 897s] + exit 0 [ 897s] ... checking for files with abuild user/group [ 897s] ... creating baselibs [ 898s] ... comparing built packages with the former built [ 898s] /usr/lib/build/pkg-diff.sh [ 899s] compare /.build.oldpackages/curl-7.81.0-31.2.src.rpm /home/abuild/rpmbuild/SRPMS/curl-7.81.0-31.3.src.rpm [ 899s] This is not a prerelease project. Compare the project name. [ 899s] comparing rpmtags [ 899s] comparing RELEASE [ 899s] comparing PROVIDES [ 899s] comparing scripts [ 899s] comparing filelist [ 899s] comparing file checksum [ 899s] RPM meta information is identical [ 899s] compare /.build.oldpackages/curl-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/curl-7.81.0-31.3.armv7hl.rpm [ 900s] Comparing curl-7.81.0-31.2.armv7hl.rpm to curl-7.81.0-31.3.armv7hl.rpm [ 900s] This is not a prerelease project. Compare the project name. [ 900s] comparing rpmtags [ 900s] comparing RELEASE [ 900s] comparing PROVIDES [ 900s] comparing scripts [ 900s] comparing filelist [ 900s] comparing file checksum [ 900s] creating rename script [ 900s] RPM file checksum differs. [ 900s] Extracting packages [ 901s] /usr/bin/curl: only difference was in build-id or gnu_debuglink, GOOD. [ 901s] Package content is identical [ 901s] compare /.build.oldpackages/curl-debuginfo-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/curl-debuginfo-7.81.0-31.3.armv7hl.rpm [ 901s] skipping -debuginfo package [ 901s] compare /.build.oldpackages/curl-debugsource-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/curl-debugsource-7.81.0-31.3.armv7hl.rpm [ 902s] Comparing curl-debugsource-7.81.0-31.2.armv7hl.rpm to curl-debugsource-7.81.0-31.3.armv7hl.rpm [ 902s] This is not a prerelease project. Compare the project name. [ 902s] comparing rpmtags [ 902s] comparing RELEASE [ 902s] comparing PROVIDES [ 902s] comparing scripts [ 902s] comparing filelist [ 902s] comparing file checksum [ 902s] creating rename script [ 902s] RPM meta information is identical [ 902s] compare /.build.oldpackages/libcurl-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-7.81.0-31.3.armv7hl.rpm [ 903s] Comparing libcurl-7.81.0-31.2.armv7hl.rpm to libcurl-7.81.0-31.3.armv7hl.rpm [ 903s] This is not a prerelease project. Compare the project name. [ 903s] comparing rpmtags [ 903s] comparing RELEASE [ 903s] comparing PROVIDES [ 903s] comparing scripts [ 903s] comparing filelist [ 903s] comparing file checksum [ 903s] creating rename script [ 903s] RPM file checksum differs. [ 903s] Extracting packages [ 906s] /usr/lib/libcurl.so.4.7.0: only difference was in build-id or gnu_debuglink, GOOD. [ 906s] Package content is identical [ 906s] compare /.build.oldpackages/libcurl-debuginfo-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-debuginfo-7.81.0-31.3.armv7hl.rpm [ 906s] skipping -debuginfo package [ 906s] compare /.build.oldpackages/libcurl-devel-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-devel-7.81.0-31.3.armv7hl.rpm [ 906s] Comparing libcurl-devel-7.81.0-31.2.armv7hl.rpm to libcurl-devel-7.81.0-31.3.armv7hl.rpm [ 906s] This is not a prerelease project. Compare the project name. [ 906s] comparing rpmtags [ 906s] comparing RELEASE [ 907s] comparing PROVIDES [ 907s] comparing scripts [ 907s] comparing filelist [ 907s] comparing file checksum [ 907s] creating rename script [ 907s] RPM file checksum differs. [ 907s] Extracting packages [ 907s] /usr/bin/curl-config differs (POSIX shell script, ASCII text executable, with very long lines (1368)) [ 907s] --- old//usr/bin/curl-config 2022-03-03 00:17:55.000000000 +0000 [ 907s] +++ new//usr/bin/curl-config 2022-03-03 03:06:30.000000000 +0000 [ 907s] @@ -172,7 +172,7 @@ [ 907s] [ 907s] --static-libs) [ 907s] if test "Xno" != "Xno" ; then [ 907s] - echo /usr/lib/libcurl.a -L/lib -lcares -lnghttp2 -ldl -licuuc -licudata -lssl -lcrypto -lz [ 907s] + echo /usr/lib/libcurl.a -lcares -lnghttp2 -ldl -licuuc -licudata -lssl -lcrypto -lz [ 907s] else [ 907s] echo "curl was built with static libraries disabled" >&2 [ 907s] exit 1 [ 907s] compare /.build.oldpackages/libcurl-extension-dlp-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-extension-dlp-7.81.0-31.3.armv7hl.rpm [ 908s] Comparing libcurl-extension-dlp-7.81.0-31.2.armv7hl.rpm to libcurl-extension-dlp-7.81.0-31.3.armv7hl.rpm [ 908s] This is not a prerelease project. Compare the project name. [ 908s] comparing rpmtags [ 908s] comparing RELEASE [ 908s] comparing PROVIDES [ 908s] comparing scripts [ 908s] comparing filelist [ 908s] comparing file checksum [ 908s] creating rename script [ 908s] RPM file checksum differs. [ 908s] Extracting packages [ 909s] /usr/lib/libcurl_extension_dlp.so.0.0.0: only difference was in build-id or gnu_debuglink, GOOD. [ 909s] Package content is identical [ 909s] compare /.build.oldpackages/libcurl-extension-dlp-debuginfo-7.81.0-31.2.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libcurl-extension-dlp-debuginfo-7.81.0-31.3.armv7hl.rpm [ 909s] skipping -debuginfo package [ 909s] [ 909s] obspw17 finished "build curl.spec" at Thu Mar 3 03:17:01 UTC 2022. [ 909s] Retried build at Thu Mar 10 08:03:41 2022 returned same result, skipped Retried build at Tue Mar 22 10:41:26 2022 returned same result, skipped