[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_4 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw07 started "build _service:gbs:pcre.spec" at Sun Jun 28 03:36:15 UTC 2020. [ 0s] [ 0s] Building pcre for project 'Tizen:Base' repository 'standard' arch 'armv7l' srcmd5 'cea56362f8880b488dedeb0be2aee013' [ 0s] [ 0s] processing recipe /var/cache/build/root_4/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_4/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_4/.build.rpmlist /var/cache/build/root_4/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/4/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling libncurses... [ 1s] [3/40] preinstalling setup... [ 1s] [4/40] preinstalling filesystem... [ 1s] [5/40] preinstalling glibc... [ 1s] [6/40] preinstalling libbz2... [ 1s] [7/40] preinstalling libgcc... [ 2s] [8/40] preinstalling bash... [ 2s] [9/40] preinstalling diffutils... [ 2s] [10/40] preinstalling grep... [ 2s] [11/40] preinstalling libattr... [ 2s] [12/40] preinstalling libblkid... [ 2s] [13/40] preinstalling libcap... [ 2s] [14/40] preinstalling libfreebl3... [ 2s] [15/40] preinstalling liblua... [ 2s] [16/40] preinstalling liblzma... [ 2s] [17/40] preinstalling libpopt... [ 2s] [18/40] preinstalling libreadline... [ 2s] [19/40] preinstalling libsmack... [ 2s] [20/40] preinstalling libsqlite... [ 2s] [21/40] preinstalling libuuid... [ 2s] [22/40] preinstalling nspr... [ 2s] [23/40] preinstalling sed... [ 2s] [24/40] preinstalling zlib... [ 2s] [25/40] preinstalling qemu-accel-x86_64-armv7l... [ 8s] [26/40] preinstalling qemu-linux-user-x86_64-cross... [ 9s] [27/40] preinstalling coreutils... [ 9s] [28/40] preinstalling libacl... [ 9s] [29/40] preinstalling libelf... [ 9s] [30/40] preinstalling libmount... [ 9s] [31/40] preinstalling smack... [ 9s] [32/40] preinstalling bzip2... [ 9s] [33/40] preinstalling libmagic... [ 9s] [34/40] preinstalling libxml2... [ 9s] [35/40] preinstalling tar... [ 9s] [36/40] preinstalling util-linux... [ 9s] [37/40] preinstalling util-linux-su... [ 9s] [38/40] preinstalling nss... [ 9s] [39/40] preinstalling libsoftokn3... [ 9s] [40/40] preinstalling rpm... [ 9s] [ 10s] running qemu-linux-user-x86_64-cross postinstall script [ 10s] running qemu-accel-x86_64-armv7l postinstall script [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 10s] reordering...cycle: libsoftokn3 -> nss [ 10s] breaking dependency nss -> libsoftokn3 [ 10s] done [ 10s] [1/94] installing libmagic-data-5.37-18.20 [ 11s] [2/94] installing setup-0.9-10.31 [ 11s] warning: /etc/profile created as /etc/profile.rpmnew [ 11s] [3/94] installing filesystem-3.1-8.1 [ 11s] [4/94] installing glibc-2.30-27.3 [ 11s] [5/94] installing libatomic-9.2.0-10.1 [ 12s] [6/94] installing libbz2-1.0.8-8.27 [ 12s] [7/94] installing libgcc-9.2.0-10.1 [ 12s] [8/94] installing bash-3.2.57-6.7 [ 12s] [9/94] installing cpio-2.11-3.7 [ 12s] [10/94] installing diffutils-3.3-3.7 [ 12s] [11/94] installing findutils-4.3.8-6.372 [ 12s] [12/94] installing gdbm-1.8.3-4.271 [ 13s] [13/94] installing hostname-3.23-7.4 [ 13s] [14/94] installing libattr-2.4.47-5.625 [ 13s] [15/94] installing libblkid-2.34-17.9 [ 13s] [16/94] installing libcap-2.24-4.832 [ 14s] [17/94] installing libext2fs-1.43.4-7.3 [ 14s] [18/94] installing libfreebl3-3.34.1-6.147 [ 14s] [19/94] installing libgfortran-9.2.0-10.1 [ 15s] [20/94] installing libgomp-9.2.0-10.1 [ 15s] [21/94] installing libitm-9.2.0-10.1 [ 15s] [22/94] installing libltdl-2.4.2-5.243 [ 15s] [23/94] installing liblua-5.1.5-5.110 [ 16s] [24/94] installing liblzma-5.2.4-6.312 [ 16s] [25/94] installing libpcre-8.43-7.32 [ 16s] [26/94] installing libpopt-1.16-4.259 [ 17s] [27/94] installing libsmack-1.3.1-5.389 [ 17s] [28/94] installing libsmartcols-2.34-17.9 [ 17s] [29/94] installing libsqlite-3.31.1-20.31 [ 18s] [30/94] installing libstdc++-9.2.0-10.1 [ 19s] [31/94] installing libuuid-2.34-17.9 [ 19s] [32/94] installing m4-1.4.17-4.4 [ 19s] [33/94] installing net-tools-2.0_20121208git-4.1 [ 20s] [34/94] installing nspr-4.12-4.236 [ 20s] [35/94] installing patch-2.7-3.256 [ 20s] [36/94] installing pkg-config-0.28-6.155 [ 20s] [37/94] installing sed-4.1c-4.7 [ 20s] [38/94] installing update-alternatives-1.18.15-5.4 [ 20s] [39/94] installing which-2.20-6.7 [ 20s] [40/94] installing zlib-1.2.11-5.528 [ 20s] [41/94] installing build-compare-2015.04.28-3.344 [ 20s] [42/94] installing libstdc++-devel-9.2.0-10.1 [ 21s] [43/94] installing qemu-linux-user-x86_64-cross-2.7.0.1-1.2.1 [ 22s] [44/94] installing terminfo-base-full-6.1_20191207-12.165 [ 23s] [45/94] installing cpp-9.2.0-10.1 [ 24s] [46/94] installing gcc-c++-9.2.0-10.1 [ 25s] [47/94] installing binutils-2.33.1-20.5 [ 25s] [48/94] installing coreutils-6.9-4.46 [ 25s] [49/94] installing db4-4.8.30.NC-4.167 [ 26s] [50/94] installing gawk-3.1.5-6.4 [ 26s] [51/94] installing grep-2.5.2-6.7 [ 26s] [52/94] installing libacl-2.2.52-5.644 [ 27s] [53/94] installing libcc1-9.2.0-10.1 [ 27s] [54/94] installing libelf-0.178-6.5 [ 27s] [55/94] installing libmount-2.34-17.9 [ 28s] [56/94] installing libubsan-9.2.0-10.1 [ 28s] [57/94] installing make-4.0-5.46 [ 28s] [58/94] installing nss-certs-3.34.1-6.147 [ 28s] [59/94] installing smack-1.3.1-5.389 [ 28s] [60/94] installing bzip2-1.0.8-8.27 [ 28s] [61/94] installing libfdisk-2.34-17.9 [ 29s] [62/94] installing libmagic-5.37-18.20 [ 29s] [63/94] installing libxml2-2.9.10-11.4 [ 29s] [64/94] installing xz-5.2.4-6.312 [ 29s] [65/94] installing linux-glibc-devel-3.10-10.68 [ 30s] [66/94] installing file-5.37-18.20 [ 30s] [67/94] installing glibc-locale-2.30-27.3 [ 30s] [68/94] installing tar-1.17-4.8 [ 30s] [69/94] installing gzip-1.3.12-7.598 [ 30s] [70/94] installing libncurses6-6.1_20191207-12.165 [ 31s] [71/94] installing pam-1.1.6-8.5 [ 33s] [72/94] installing perl-5.30.0-10.90 [ 35s] [73/94] installing tzdata-2019c-12.4 [ 36s] [74/94] installing libdw-0.178-6.5 [ 36s] [75/94] installing gcc-9.2.0-10.1 [ 37s] [76/94] installing build-mkbaselibs-20120927-3.1 [ 37s] [77/94] installing libncurses-6.1_20191207-12.165 [ 37s] [78/94] installing glibc-devel-2.30-27.3 [ 37s] [79/94] installing qemu-accel-x86_64-armv7l-0.4-17.3 [ 48s] [80/94] installing autoconf-2.69-5.331 [ 48s] [81/94] installing less-466-8.12 [ 48s] [82/94] installing libreadline-5.2-5.163 [ 49s] [83/94] installing procps-ng-3.3.15-9.5 [ 49s] [84/94] installing libasm-0.178-6.5 [ 49s] [85/94] installing automake-1.15.1-6.488 [ 50s] [86/94] installing build-20120927-3.1 [ 50s] [87/94] installing elfutils-0.178-6.5 [ 50s] [88/94] installing util-linux-2.34-17.9 [ 50s] [89/94] installing libtool-2.4.2-5.243 [ 50s] [90/94] installing util-linux-su-2.34-17.9 [ 50s] [91/94] installing nss-3.34.1-6.147 [ 51s] [92/94] installing libsoftokn3-3.34.1-6.147 [ 51s] [93/94] installing rpm-4.11.0.1-17.13 [ 51s] [94/94] installing rpm-build-4.11.0.1-17.13 [ 51s] removing nis flags from /var/cache/build/root_4/etc/nsswitch.conf... [ 51s] now finalizing build dir... [ 52s] Running build time source services... [ 52s] build target is armv7l-tizen-linux [ 52s] ----------------------------------------------------------------- [ 52s] I have the following modifications for pcre.spec: [ 52s] 12c12 [ 52s] < Release: 0 [ 52s] --- [ 52s] > Release: 7.33 [ 52s] 185a186 [ 52s] > %changelog [ 52s] ----------------------------------------------------------------- [ 52s] ----- building pcre.spec (user abuild) [ 52s] ----------------------------------------------------------------- [ 52s] ----------------------------------------------------------------- [ 52s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Base/standard/cea56362f8880b488dedeb0be2aee013-pcre' -ba /home/abuild/rpmbuild/SOURCES/pcre.spec [ 52s] Building target platforms: armv7l-tizen-linux [ 52s] Building for target armv7l-tizen-linux [ 52s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.zR6aRl [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + rm -rf pcre-8.43 [ 52s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.43.tar.bz2 [ 52s] + /bin/tar -xf - [ 53s] + STATUS=0 [ 53s] + '[' 0 -ne 0 ']' [ 53s] + cd pcre-8.43 [ 53s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 53s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 53s] + exit 0 [ 53s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.8IEBli [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd pcre-8.43 [ 53s] + [[ arm == \a\a\r\c\h\6\4 ]] [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 53s] + export CFLAGS [ 53s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 53s] + export CXXFLAGS [ 53s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 53s] + export FFLAGS [ 53s] + LDFLAGS= [ 53s] + export LDFLAGS [ 53s] + autoreconf -fiv [ 55s] autoreconf: Entering directory `.' [ 55s] autoreconf: configure.ac: not using Gettext [ 56s] autoreconf: running: aclocal --force -I m4 [ 65s] autoreconf: configure.ac: tracing [ 66s] autoreconf: running: libtoolize --copy --force [ 67s] libtoolize: putting auxiliary files in `.'. [ 67s] libtoolize: copying file `./ltmain.sh' [ 67s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 67s] libtoolize: copying file `m4/libtool.m4' [ 67s] libtoolize: copying file `m4/ltoptions.m4' [ 67s] libtoolize: copying file `m4/ltsugar.m4' [ 67s] libtoolize: copying file `m4/ltversion.m4' [ 67s] libtoolize: copying file `m4/lt~obsolete.m4' [ 76s] autoreconf: running: /usr/bin/autoconf --force [ 80s] autoreconf: running: /usr/bin/autoheader --force [ 82s] autoreconf: running: automake --add-missing --copy --force-missing [ 88s] autoreconf: Leaving directory `.' [ 88s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 88s] + export CFLAGS [ 88s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 88s] + export CXXFLAGS [ 88s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 88s] + export FFLAGS [ 88s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 88s] checking for a BSD-compatible install... /bin/install -c [ 88s] checking whether build environment is sane... yes [ 88s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 88s] checking for gawk... gawk [ 88s] checking whether make sets $(MAKE)... yes [ 88s] checking whether make supports nested variables... yes [ 88s] checking whether make supports nested variables... (cached) yes [ 88s] checking for style of include used by make... GNU [ 88s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 88s] checking whether the C compiler works... yes [ 88s] checking for C compiler default output file name... a.out [ 88s] checking for suffix of executables... [ 89s] checking whether we are cross compiling... no [ 89s] checking for suffix of object files... o [ 89s] checking whether we are using the GNU C compiler... yes [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 89s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 89s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 89s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 89s] checking for armv7l-tizen-linux-gnueabi-link... no [ 89s] checking for ar... ar [ 89s] checking the archiver (ar) interface... ar [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 89s] checking whether we are using the GNU C compiler... (cached) yes [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 89s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... (cached) yes [ 89s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 89s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 89s] checking whether we are using the GNU C++ compiler... yes [ 89s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 89s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 89s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 89s] checking for grep that handles long lines and -e... /bin/grep [ 89s] checking for egrep... /bin/grep -E [ 89s] checking for ANSI C header files... yes [ 89s] checking for sys/types.h... yes [ 89s] checking for sys/stat.h... yes [ 89s] checking for stdlib.h... yes [ 89s] checking for string.h... yes [ 89s] checking for memory.h... yes [ 89s] checking for strings.h... yes [ 89s] checking for inttypes.h... yes [ 89s] checking for stdint.h... yes [ 90s] checking for unistd.h... yes [ 90s] checking for int64_t... yes [ 90s] checking build system type... armv7l-tizen-linux-gnueabi [ 90s] checking host system type... armv7l-tizen-linux-gnueabi [ 90s] checking how to print strings... printf [ 90s] checking for a sed that does not truncate output... /bin/sed [ 90s] checking for fgrep... /bin/grep -F [ 90s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 90s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 90s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 90s] checking the name lister (/bin/nm -B) interface... BSD nm [ 90s] checking whether ln -s works... yes [ 90s] checking the maximum length of command line arguments... 1572864 [ 90s] checking whether the shell understands some XSI constructs... yes [ 90s] checking whether the shell understands "+="... yes [ 90s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 90s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 90s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 90s] checking for armv7l-tizen-linux-gnueabi-objdump... objdump [ 90s] checking how to recognize dependent libraries... pass_all [ 90s] checking for armv7l-tizen-linux-gnueabi-dlltool... dlltool [ 90s] checking how to associate runtime and link libraries... printf %s\n [ 90s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 90s] checking for archiver @FILE support... @ [ 90s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 90s] checking for strip... strip [ 90s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 90s] checking for ranlib... ranlib [ 90s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 90s] checking for sysroot... no [ 90s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 90s] checking for mt... no [ 90s] checking if : is a manifest tool... no [ 90s] checking for dlfcn.h... yes [ 90s] checking for objdir... .libs [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 90s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 90s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 90s] checking whether -lc should be explicitly linked in... no [ 90s] checking dynamic linker characteristics... GNU/Linux ld.so [ 90s] checking how to hardcode library paths into programs... immediate [ 90s] checking whether stripping libraries is possible... yes [ 90s] checking if libtool supports shared libraries... yes [ 90s] checking whether to build shared libraries... yes [ 90s] checking whether to build static libraries... yes [ 90s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 90s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 90s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 90s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 90s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 90s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 91s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 91s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 91s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 91s] checking how to hardcode library paths into programs... immediate [ 91s] checking whether ln -s works... yes [ 91s] checking whether the -Werror option is usable... yes [ 91s] checking for simple visibility declarations... yes [ 91s] checking for ANSI C header files... (cached) yes [ 91s] checking limits.h usability... yes [ 91s] checking limits.h presence... yes [ 91s] checking for limits.h... yes [ 91s] checking for sys/types.h... (cached) yes [ 91s] checking for sys/stat.h... (cached) yes [ 91s] checking dirent.h usability... yes [ 91s] checking dirent.h presence... yes [ 91s] checking for dirent.h... yes [ 91s] checking windows.h usability... no [ 91s] checking windows.h presence... no [ 91s] checking for windows.h... no [ 91s] checking for alias support in the linker... no [ 91s] checking for alias support in the linker... no [ 91s] checking string usability... yes [ 91s] checking string presence... yes [ 91s] checking for string... yes [ 91s] checking bits/type_traits.h usability... no [ 91s] checking bits/type_traits.h presence... no [ 91s] checking for bits/type_traits.h... no [ 91s] checking type_traits.h usability... no [ 91s] checking type_traits.h presence... no [ 91s] checking for type_traits.h... no [ 91s] checking for strtoq... yes [ 91s] checking for long long... yes [ 92s] checking for unsigned long long... yes [ 92s] checking for an ANSI C-conforming const... yes [ 92s] checking for size_t... yes [ 92s] checking for bcopy... yes [ 92s] checking for memmove... yes [ 92s] checking for strerror... yes [ 92s] checking zlib.h usability... no [ 92s] checking zlib.h presence... no [ 92s] checking for zlib.h... no [ 92s] checking for gzopen in -lz... no [ 92s] checking bzlib.h usability... no [ 92s] checking bzlib.h presence... no [ 92s] checking for bzlib.h... no [ 92s] checking for libbz2... no [ 92s] checking for the pthreads library -lpthreads... no [ 92s] checking whether pthreads work without any flags... no [ 92s] checking whether pthreads work with -Kthread... no [ 92s] checking whether pthreads work with -kthread... no [ 92s] checking for the pthreads library -llthread... no [ 92s] checking whether pthreads work with -pthread... yes [ 92s] checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE [ 92s] checking if more special flags are required for pthreads... no [ 92s] checking for PTHREAD_PRIO_INHERIT... yes [ 92s] checking that generated files are newer than configure... done [ 92s] configure: creating ./config.status [ 93s] config.status: creating Makefile [ 93s] config.status: creating libpcre.pc [ 93s] config.status: creating libpcre16.pc [ 93s] config.status: creating libpcre32.pc [ 93s] config.status: creating libpcreposix.pc [ 93s] config.status: creating libpcrecpp.pc [ 93s] config.status: creating pcre-config [ 93s] config.status: creating pcre.h [ 93s] config.status: creating pcre_stringpiece.h [ 93s] config.status: creating pcrecpparg.h [ 93s] config.status: creating config.h [ 93s] config.status: executing depfiles commands [ 95s] config.status: executing libtool commands [ 95s] config.status: executing script-chmod commands [ 95s] config.status: executing delete-old-chartables commands [ 95s] [ 95s] pcre-8.43 configuration summary: [ 95s] [ 95s] Install prefix .................. : /usr [ 95s] C preprocessor .................. : armv7l-tizen-linux-gnueabi-gcc -E [ 95s] C compiler ...................... : armv7l-tizen-linux-gnueabi-gcc [ 95s] C++ preprocessor ................ : armv7l-tizen-linux-gnueabi-g++ -E [ 95s] C++ compiler .................... : armv7l-tizen-linux-gnueabi-g++ [ 95s] Linker .......................... : /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 95s] C preprocessor flags ............ : [ 95s] C compiler flags ................ : -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden [ 95s] C++ compiler flags .............. : -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fvisibility=hidden -fvisibility-inlines-hidden [ 95s] Linker flags .................... : [ 95s] Extra libraries ................. : [ 95s] [ 95s] Build 8 bit pcre library ........ : yes [ 95s] Build 16 bit pcre library ....... : no [ 95s] Build 32 bit pcre library ....... : no [ 95s] Build C++ library ............... : yes [ 95s] Enable JIT compiling support .... : yes [ 95s] Enable UTF-8/16/32 support ...... : yes [ 95s] Unicode properties .............. : yes [ 95s] Newline char/sequence ........... : lf [ 95s] \R matches only ANYCRLF ......... : no [ 95s] EBCDIC coding ................... : no [ 95s] EBCDIC code for NL .............. : n/a [ 95s] Rebuild char tables ............. : no [ 95s] Use stack recursion ............. : yes [ 95s] POSIX mem threshold ............. : 10 [ 95s] Internal link size .............. : 2 [ 95s] Nested parentheses limit ........ : 250 [ 95s] Match limit ..................... : 10000000 [ 95s] Match limit recursion ........... : MATCH_LIMIT [ 95s] Build shared libs ............... : yes [ 95s] Build static libs ............... : yes [ 95s] Use JIT in pcregrep ............. : yes [ 95s] Buffer size for pcregrep ........ : 20480 [ 95s] Link pcregrep with libz ......... : no [ 95s] Link pcregrep with libbz2 ....... : no [ 95s] Link pcretest with libedit ...... : no [ 95s] Link pcretest with libreadline .. : no [ 95s] Valgrind support ................ : no [ 95s] Code coverage ................... : no [ 95s] [ 95s] + make -j4 [ 95s] rm -f pcre_chartables.c [ 95s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 95s] make all-am [ 95s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 95s] CC libpcre_la-pcre_byte_order.lo [ 95s] CC libpcre_la-pcre_compile.lo [ 95s] CC libpcre_la-pcre_dfa_exec.lo [ 95s] CC libpcre_la-pcre_config.lo [ 95s] CC libpcre_la-pcre_exec.lo [ 95s] CC libpcre_la-pcre_fullinfo.lo [ 96s] CC libpcre_la-pcre_get.lo [ 96s] CC libpcre_la-pcre_globals.lo [ 96s] CC libpcre_la-pcre_jit_compile.lo [ 100s] CC libpcre_la-pcre_maketables.lo [ 100s] CC libpcre_la-pcre_newline.lo [ 100s] CC libpcre_la-pcre_ord2utf8.lo [ 100s] CC libpcre_la-pcre_refcount.lo [ 100s] CC libpcre_la-pcre_string_utils.lo [ 101s] CC libpcre_la-pcre_study.lo [ 101s] CC libpcre_la-pcre_tables.lo [ 101s] CC libpcre_la-pcre_ucd.lo [ 102s] CC libpcre_la-pcre_valid_utf8.lo [ 102s] CC libpcre_la-pcre_version.lo [ 102s] CC libpcre_la-pcre_xclass.lo [ 102s] CC libpcre_la-pcre_chartables.lo [ 102s] CC libpcreposix_la-pcreposix.lo [ 102s] CXX libpcrecpp_la-pcrecpp.lo [ 102s] CXX libpcrecpp_la-pcre_scanner.lo [ 103s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 104s] CC pcretest-pcretest.o [ 104s] CC pcretest-pcre_printint.o [ 105s] CC pcregrep-pcregrep.o [ 106s] CC pcre_jit_test-pcre_jit_test.o [ 106s] CXX pcrecpp_unittest-pcrecpp_unittest.o [ 106s] CXX pcre_scanner_unittest-pcre_scanner_unittest.o [ 107s] CXX pcre_stringpiece_unittest-pcre_stringpiece_unittest.o [ 108s] CCLD libpcre.la [ 109s] CCLD libpcreposix.la [ 109s] CXXLD libpcrecpp.la [ 109s] CCLD pcre_jit_test [ 109s] CCLD pcretest [ 109s] CCLD pcregrep [ 109s] CXXLD pcre_scanner_unittest [ 109s] CXXLD pcre_stringpiece_unittest [ 110s] CXXLD pcrecpp_unittest [ 110s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 110s] + exit 0 [ 110s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5GiGym [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd pcre-8.43 [ 110s] + LANG=C [ 110s] + export LANG [ 110s] + unset DISPLAY [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm [ 110s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm [ 110s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm install [ 110s] /bin/make install-am [ 110s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 110s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 110s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib' [ 110s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib' [ 110s] libtool: install: /bin/install -c .libs/libpcre.so.1.2.11 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcre.so.1.2.11 [ 110s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib && { ln -s -f libpcre.so.1.2.11 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.2.11 libpcre.so.1; }; }) [ 110s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib && { ln -s -f libpcre.so.1.2.11 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.2.11 libpcre.so; }; }) [ 110s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcre.la [ 110s] libtool: install: warning: relinking `libpcreposix.la' [ 110s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CC --mode=relink armv7l-tizen-linux-gnueabi-gcc -fvisibility=hidden -pthread -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:6:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm) [ 111s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.6T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcreposix.so.0.0.6 [ 111s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.6 libpcreposix.so.0; }; }) [ 111s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.6 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.6 libpcreposix.so; }; }) [ 111s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcreposix.la [ 111s] libtool: install: warning: relinking `libpcrecpp.la' [ 111s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.43; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.43/libtool --silent --tag CXX --mode=relink armv7l-tizen-linux-gnueabi-g++ -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -version-info 0:1:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm) [ 111s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.1T /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcrecpp.so.0.0.1 [ 111s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so.0; }; }) [ 111s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.1 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.1 libpcrecpp.so; }; }) [ 111s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcrecpp.la [ 111s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcre.a [ 111s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcre.a [ 111s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcre.a [ 111s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcreposix.a [ 111s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcreposix.a [ 111s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcreposix.a [ 111s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcrecpp.a [ 111s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcrecpp.a [ 111s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcrecpp.a [ 111s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin' [ 111s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin' [ 111s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 111s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 111s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib' [ 111s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin/pcretest [ 111s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 111s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 111s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.43/libpcre.la' has not been installed in `/usr/lib' [ 111s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin/pcregrep [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin' [ 111s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre' [ 111s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre/html' [ 111s] /bin/install -c -m 644 doc/html/NON-AUTOTOOLS-BUILD.txt doc/html/README.txt doc/html/index.html doc/html/pcre-config.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre32.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_exec.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_utf32_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre/html' [ 111s] /bin/install -c -m 644 doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre/html' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre/html' [ 111s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre/html' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/include' [ 111s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/include' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man1' [ 111s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man1' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3' [ 111s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre32.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_exec.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_utf32_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcredemo.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3' [ 111s] /bin/install -c -m 644 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/include' [ 111s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/include' [ 111s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/pkgconfig' [ 111s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/pkgconfig' [ 111s] /bin/make install-data-hook [ 111s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 111s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 111s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_compile.3 [ 111s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_compile2.3 [ 111s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_config.3 [ 111s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 112s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 112s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 112s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_exec.3 [ 112s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_free_study.3 [ 112s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_free_substring.3 [ 112s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 112s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 112s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 112s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 112s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 112s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_get_substring.3 [ 112s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 112s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_jit_exec.3 [ 112s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 112s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 112s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_maketables.3 [ 112s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 112s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_refcount.3 [ 112s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_study.3 [ 112s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 112s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre16_version.3 [ 112s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_assign_jit_stack.3 [ 112s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_compile.3 [ 112s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_compile2.3 [ 112s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_config.3 [ 112s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_copy_named_substring.3 [ 112s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_copy_substring.3 [ 112s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_dfa_exec.3 [ 112s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_exec.3 [ 112s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_free_study.3 [ 112s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_free_substring.3 [ 112s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_free_substring_list.3 [ 112s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_fullinfo.3 [ 112s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_get_named_substring.3 [ 112s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_get_stringnumber.3 [ 112s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_get_stringtable_entries.3 [ 112s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_get_substring.3 [ 112s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_get_substring_list.3 [ 112s] ln -sf pcre_jit_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_jit_exec.3 [ 112s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_jit_stack_alloc.3 [ 112s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_jit_stack_free.3 [ 112s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_maketables.3 [ 112s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_pattern_to_host_byte_order.3 [ 112s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_refcount.3 [ 112s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_study.3 [ 112s] ln -sf pcre_utf32_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_utf32_to_host_byte_order.3 [ 112s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/man/man3/pcre32_version.3 [ 112s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 112s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 112s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 112s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/info/dir [ 112s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm -regex '.*\.la$' [ 112s] + xargs rm -f -- [ 112s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm//usr/share/doc/packages [ 112s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm//usr/share/doc/packages/pcre-doc [ 112s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/*.la' [ 112s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pcre-8.43 [ 112s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin/pcregrep [ 113s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/bin/pcretest [ 113s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcre.so.1.2.11 [ 113s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcrecpp.so.0.0.1 [ 114s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/lib/libpcreposix.so.0.0.6 [ 114s] 4373 blocks [ 114s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debuginfo.manifest [ 114s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/pcre-8.43/pcre-debugsource.manifest [ 114s] + /usr/lib/rpm/check-buildroot [ 114s] + /usr/lib/rpm//brp-compress [ 115s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 116s] + /usr/lib/rpm/brp-python-hardlink [ 116s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm [ 116s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.LHKpYk [ 116s] + umask 022 [ 116s] + cd /home/abuild/rpmbuild/BUILD [ 116s] + cd pcre-8.43 [ 116s] + export LANG=POSIX [ 116s] + LANG=POSIX [ 116s] + make check [ 116s] make check-am [ 116s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 116s] make [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 116s] make all-am [ 116s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 116s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 116s] make check-TESTS [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 116s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 132s] PASS: pcre_jit_test [ 132s] PASS: pcrecpp_unittest [ 132s] PASS: pcre_scanner_unittest [ 132s] PASS: pcre_stringpiece_unittest [ 141s] PASS: RunTest [ 147s] PASS: RunGrepTest [ 147s] ============================================================================ [ 147s] Testsuite summary for PCRE 8.43 [ 147s] ============================================================================ [ 147s] # TOTAL: 6 [ 147s] # PASS: 6 [ 147s] # SKIP: 0 [ 147s] # XFAIL: 0 [ 147s] # FAIL: 0 [ 147s] # XPASS: 0 [ 147s] # ERROR: 0 [ 147s] ============================================================================ [ 147s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 147s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 147s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.43' [ 147s] + exit 0 [ 147s] Processing files: pcre-debugsource-8.43-7.33.armv7l [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Provides: pcre-debugsource = 8.43-7.33 pcre-debugsource(armv7l-32) = 8.43-7.33 [ 147s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 147s] Processing files: pcre-devel-8.43-7.33.armv7l [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 148s] Provides: pcre-devel = 8.43-7.33 pcre-devel(armv7l-32) = 8.43-7.33 pkgconfig(libpcre) = 8.43 pkgconfig(libpcrecpp) = 8.43 pkgconfig(libpcreposix) = 8.43 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Requires: /bin/sh /usr/bin/pkg-config libpcre.so.1 libpcrecpp.so.0 libpcreposix.so.0 pkgconfig(libpcre) [ 148s] Processing files: pcre-devel-static-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Provides: pcre-devel-static = 8.43-7.33 pcre-devel-static(armv7l-32) = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Processing files: libpcre-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.JYuNxi [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + cd pcre-8.43 [ 148s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcre [ 148s] + export LICENSEDIR [ 148s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcre [ 148s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcre [ 148s] + exit 0 [ 148s] Provides: libpcre = 8.43-7.33 libpcre(armv7l-32) = 8.43-7.33 libpcre.so.1 pcre = 8.43 [ 148s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Requires(post): /sbin/ldconfig [ 148s] Requires(postun): /sbin/ldconfig [ 148s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 148s] Obsoletes: pcre < 8.43 [ 148s] Processing files: libpcreposix-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SAH7gj [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + cd pcre-8.43 [ 148s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcreposix [ 148s] + export LICENSEDIR [ 148s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcreposix [ 148s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcreposix [ 148s] + exit 0 [ 148s] Provides: libpcreposix = 8.43-7.33 libpcreposix(armv7l-32) = 8.43-7.33 libpcreposix.so.0 [ 148s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Requires(post): /sbin/ldconfig [ 148s] Requires(postun): /sbin/ldconfig [ 148s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 rtld(GNU_HASH) [ 148s] Processing files: libpcrecpp-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TphdSi [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + cd pcre-8.43 [ 148s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcrecpp [ 148s] + export LICENSEDIR [ 148s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcrecpp [ 148s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/libpcrecpp [ 148s] + exit 0 [ 148s] Provides: libpcrecpp = 8.43-7.33 libpcrecpp(armv7l-32) = 8.43-7.33 libpcrecpp.so.0 [ 148s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Requires(post): /sbin/ldconfig [ 148s] Requires(postun): /sbin/ldconfig [ 148s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_1.3.8) libstdc++.so.6(CXXABI_1.3.9) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.20) libstdc++.so.6(GLIBCXX_3.4.21) libstdc++.so.6(GLIBCXX_3.4.9) rtld(GNU_HASH) [ 148s] Processing files: pcre-doc-8.43-7.33.noarch [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.59xiij [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + cd pcre-8.43 [ 148s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + export DOCDIR [ 148s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr ChangeLog /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/doc/packages/pcre-doc [ 148s] + exit 0 [ 148s] Provides: pcre-doc = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Processing files: pcre-tools-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.oCegHk [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + cd pcre-8.43 [ 148s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/pcre-tools [ 148s] + export LICENSEDIR [ 148s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/pcre-tools [ 148s] + cp -pr LICENCE /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm/usr/share/licenses/pcre-tools [ 148s] + exit 0 [ 148s] Provides: pcre-tools = 8.43-7.33 pcre-tools(armv7l-32) = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) rtld(GNU_HASH) [ 148s] Processing files: libpcre-debuginfo-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Provides: libpcre-debuginfo = 8.43-7.33 libpcre-debuginfo(armv7l-32) = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Processing files: libpcreposix-debuginfo-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Provides: libpcreposix-debuginfo = 8.43-7.33 libpcreposix-debuginfo(armv7l-32) = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Processing files: libpcrecpp-debuginfo-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Provides: libpcrecpp-debuginfo = 8.43-7.33 libpcrecpp-debuginfo(armv7l-32) = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Processing files: pcre-tools-debuginfo-8.43-7.33.armv7l [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] warning: File listed twice: /usr/lib/debug/.build-id [ 148s] Provides: pcre-tools-debuginfo = 8.43-7.33 pcre-tools-debuginfo(armv7l-32) = 8.43-7.33 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm [ 148s] warning: Could not canonicalize hostname: obsnw07 [ 149s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.43-7.33.src.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.43-7.33.armv7l.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.43-7.33.armv7l.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.43-7.33.armv7l.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.43-7.33.armv7l.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.43-7.33.armv7l.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.43-7.33.armv7l.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-7.33.noarch.rpm [ 150s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.43-7.33.armv7l.rpm [ 151s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.43-7.33.armv7l.rpm [ 151s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.43-7.33.armv7l.rpm [ 151s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.43-7.33.armv7l.rpm [ 151s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.43-7.33.armv7l.rpm [ 151s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yVnDdk [ 151s] + umask 022 [ 151s] + cd /home/abuild/rpmbuild/BUILD [ 151s] + cd pcre-8.43 [ 151s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.43-7.33.arm [ 151s] + exit 0 [ 151s] ... checking for files with abuild user/group [ 151s] ... creating baselibs [ 152s] no targets for arch armv7l, nothing to do [ 152s] ... comparing built packages with the former built [ 152s] /usr/lib/build/pkg-diff.sh [ 152s] compare /.build.oldpackages/pcre-8.43-7.32.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.43-7.33.src.rpm [ 152s] This is not a prerelease project. Compare the project name. [ 152s] comparing rpmtags [ 152s] comparing RELEASE [ 152s] comparing PROVIDES [ 152s] comparing scripts [ 152s] comparing filelist [ 152s] comparing file checksum [ 152s] RPM meta information is identical [ 152s] compare /.build.oldpackages/libpcre-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.43-7.33.armv7l.rpm [ 152s] Comparing libpcre-8.43-7.32.armv7l.rpm to libpcre-8.43-7.33.armv7l.rpm [ 152s] This is not a prerelease project. Compare the project name. [ 152s] comparing rpmtags [ 152s] comparing RELEASE [ 152s] comparing PROVIDES [ 152s] comparing scripts [ 152s] comparing filelist [ 152s] comparing file checksum [ 152s] creating rename script [ 152s] RPM file checksum differs. [ 152s] Extracting packages [ 153s] /usr/lib/libpcre.so.1.2.11: only difference was in build-id or gnu_debuglink, GOOD. [ 153s] Package content is identical [ 153s] compare /.build.oldpackages/libpcre-debuginfo-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.43-7.33.armv7l.rpm [ 153s] skipping -debuginfo package [ 153s] compare /.build.oldpackages/libpcrecpp-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.43-7.33.armv7l.rpm [ 154s] Comparing libpcrecpp-8.43-7.32.armv7l.rpm to libpcrecpp-8.43-7.33.armv7l.rpm [ 154s] This is not a prerelease project. Compare the project name. [ 154s] comparing rpmtags [ 154s] comparing RELEASE [ 154s] comparing PROVIDES [ 154s] comparing scripts [ 154s] comparing filelist [ 154s] comparing file checksum [ 154s] creating rename script [ 154s] RPM file checksum differs. [ 154s] Extracting packages [ 154s] /usr/lib/libpcrecpp.so.0.0.1: only difference was in build-id or gnu_debuglink, GOOD. [ 154s] Package content is identical [ 154s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.43-7.33.armv7l.rpm [ 154s] skipping -debuginfo package [ 154s] compare /.build.oldpackages/libpcreposix-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.43-7.33.armv7l.rpm [ 154s] Comparing libpcreposix-8.43-7.32.armv7l.rpm to libpcreposix-8.43-7.33.armv7l.rpm [ 154s] This is not a prerelease project. Compare the project name. [ 154s] comparing rpmtags [ 154s] comparing RELEASE [ 154s] comparing PROVIDES [ 154s] comparing scripts [ 154s] comparing filelist [ 154s] comparing file checksum [ 154s] creating rename script [ 154s] RPM file checksum differs. [ 155s] Extracting packages [ 155s] /usr/lib/libpcreposix.so.0.0.6: only difference was in build-id or gnu_debuglink, GOOD. [ 155s] Package content is identical [ 155s] compare /.build.oldpackages/libpcreposix-debuginfo-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.43-7.33.armv7l.rpm [ 155s] skipping -debuginfo package [ 155s] compare /.build.oldpackages/pcre-debugsource-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.43-7.33.armv7l.rpm [ 155s] Comparing pcre-debugsource-8.43-7.32.armv7l.rpm to pcre-debugsource-8.43-7.33.armv7l.rpm [ 155s] This is not a prerelease project. Compare the project name. [ 155s] comparing rpmtags [ 155s] comparing RELEASE [ 155s] comparing PROVIDES [ 155s] comparing scripts [ 155s] comparing filelist [ 155s] comparing file checksum [ 155s] creating rename script [ 155s] RPM meta information is identical [ 155s] compare /.build.oldpackages/pcre-devel-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.43-7.33.armv7l.rpm [ 155s] Comparing pcre-devel-8.43-7.32.armv7l.rpm to pcre-devel-8.43-7.33.armv7l.rpm [ 155s] This is not a prerelease project. Compare the project name. [ 155s] comparing rpmtags [ 155s] comparing RELEASE [ 155s] comparing PROVIDES [ 155s] comparing scripts [ 155s] comparing filelist [ 155s] comparing file checksum [ 155s] creating rename script [ 155s] RPM meta information is identical [ 155s] compare /.build.oldpackages/pcre-devel-static-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.43-7.33.armv7l.rpm [ 156s] Comparing pcre-devel-static-8.43-7.32.armv7l.rpm to pcre-devel-static-8.43-7.33.armv7l.rpm [ 156s] This is not a prerelease project. Compare the project name. [ 156s] comparing rpmtags [ 156s] comparing RELEASE [ 156s] comparing PROVIDES [ 156s] comparing scripts [ 156s] comparing filelist [ 156s] comparing file checksum [ 156s] creating rename script [ 156s] RPM file checksum differs. [ 156s] Extracting packages [ 156s] /usr/lib/libpcre_la-pcre_byte_order.o differs in ELF section .comment [ 156s] --- /tmp/tmp.FUvGA70161/tmp.IkeHI70342 2020-06-28 03:38:51.534511709 +0000 [ 156s] +++ /tmp/tmp.FUvGA70161/tmp.TubJj70355 2020-06-28 03:38:51.538511673 +0000 [ 156s] @@ -4,4 +4,4 @@ [ 156s] Contents of section .comment: [ 156s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 156s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 156s] - 0020 382e3129 20392e32 2e3000 8.1) 9.2.0. [ 156s] + 0020 392e3129 20392e32 2e3000 9.1) 9.2.0. [ 156s] compare /.build.oldpackages/pcre-doc-8.43-7.32.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.43-7.33.noarch.rpm [ 156s] Comparing pcre-doc-8.43-7.32.noarch.rpm to pcre-doc-8.43-7.33.noarch.rpm [ 156s] This is not a prerelease project. Compare the project name. [ 156s] comparing rpmtags [ 156s] comparing RELEASE [ 156s] comparing PROVIDES [ 156s] comparing scripts [ 156s] comparing filelist [ 156s] comparing file checksum [ 156s] creating rename script [ 156s] RPM meta information is identical [ 156s] compare /.build.oldpackages/pcre-tools-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.43-7.33.armv7l.rpm [ 157s] Comparing pcre-tools-8.43-7.32.armv7l.rpm to pcre-tools-8.43-7.33.armv7l.rpm [ 157s] This is not a prerelease project. Compare the project name. [ 157s] comparing rpmtags [ 157s] comparing RELEASE [ 157s] comparing PROVIDES [ 157s] comparing scripts [ 157s] comparing filelist [ 157s] comparing file checksum [ 157s] creating rename script [ 157s] RPM file checksum differs. [ 157s] Extracting packages [ 157s] /usr/bin/pcregrep: only difference was in build-id or gnu_debuglink, GOOD. [ 157s] /usr/bin/pcretest: only difference was in build-id or gnu_debuglink, GOOD. [ 157s] Package content is identical [ 157s] compare /.build.oldpackages/pcre-tools-debuginfo-8.43-7.32.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.43-7.33.armv7l.rpm [ 157s] skipping -debuginfo package [ 157s] [ 157s] obsnw07 finished "build pcre.spec" at Sun Jun 28 03:38:52 UTC 2020. [ 157s]