[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w27 started "build _service:gbs:pcre.spec" at Wed Apr 22 13:08:52 UTC 2015. [ 0s] [ 0s] Building pcre for project 'Tizen:Common' repository 'arm-x11' arch 'armv7l' srcmd5 'cce6791f9c5603c331c4591bd201eed1' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:pcre.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:pcre.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /.build/qemu-reg: No such file or directory [ 0s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 0s] write: Invalid argument [ 0s] /proc/sys/fs/binfmt_misc/register: write failed [ 0s] /usr/lib/build/qemu-reg: line 7: write failed. Content: :arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/usr/bin/qemu-arm-binfmt:P [ 0s] [ 0s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc_s1... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling libattr... [ 1s] [9/40] preinstalling libbz2... [ 1s] [10/40] preinstalling libelf... [ 1s] [11/40] preinstalling libfreebl3... [ 1s] [12/40] preinstalling liblua... [ 1s] [13/40] preinstalling liblzma... [ 1s] [14/40] preinstalling libncurses... [ 1s] [15/40] preinstalling libpopt... [ 1s] [16/40] preinstalling libsmack... [ 1s] [17/40] preinstalling libsqlite... [ 1s] [18/40] preinstalling libuuid... [ 1s] [19/40] preinstalling nspr... [ 1s] [20/40] preinstalling sed... [ 1s] [21/40] preinstalling tar... [ 1s] [22/40] preinstalling zlib... [ 1s] [23/40] preinstalling qemu-accel-armv7l-cross-arm... [ 5s] [24/40] preinstalling qemu-linux-user-cross-arm... [ 5s] [25/40] preinstalling grep... [ 5s] [26/40] preinstalling libacl... [ 5s] [27/40] preinstalling libblkid... [ 5s] [28/40] preinstalling libcap... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling coreutils... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling nss... [ 6s] [38/40] preinstalling libsoftokn3... [ 6s] [39/40] preinstalling rpm... [ 6s] [40/40] preinstalling rpm-security-plugin... [ 6s] [ 6s] [1/8] preinstalling libext2fs... [ 6s] [2/8] preinstalling libpcre... [ 6s] [3/8] preinstalling libuuid... [ 6s] [4/8] preinstalling perl... [ 7s] [5/8] preinstalling grep... [ 7s] [6/8] preinstalling libblkid... [ 7s] [7/8] preinstalling libmount... [ 7s] [8/8] preinstalling util-linux... [ 7s] copying packages... [ 7s] reordering...cycle: gcc49-locale -> gcc49 [ 7s] breaking dependency gcc49 -> gcc49-locale [ 7s] cycle: coreutils -> pam [ 7s] breaking dependency pam -> coreutils [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 13s] booting kvm ... [ 13s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 15s] doing fast boot [ 15s] Creating device nodes with udev [ 26s] Waiting for device /dev/vda to appear: ok [ 26s] fsck from util-linux 2.21.2 [ 26s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 26s] /dev/vda: clean, 4701/2392064 files, 256253/9568256 blocks [ 26s] fsck succeeded. Mounting root device read-write. [ 26s] Mounting root /dev/vda [ 26s] mount -o rw -t ext4 /dev/vda /root [ 29s] replacing /etc/mtab with symlink to /proc/self/mounts [ 50s] 2nd stage started in virtual machine [ 51s] machine type: armv7l [ 52s] swapon /dev/vdb [ 52s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 52s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 53s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 61s] mount: none is already mounted or /proc busy [ 61s] mount: none is already mounted or /dev/pts busy [ 61s] logging output to //.build.log... [ 62s] processing specfile /.build-srcdir/_service:gbs:pcre.spec ... [ 63s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:pcre.spec build rpmlint-Factory ... [ 84s] running qemu-accel-armv7l-cross-arm postinstall script [ 85s] ++ uname -m [ 85s] + '[' armv7l = armv7l ']' [ 85s] + builtin echo armv7l arch [ 85s] armv7l arch [ 85s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 86s] + /usr/sbin/ldconfig [ 86s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 86s] + did_mount_it= [ 86s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 86s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 86s] + builtin echo Registering accelerated handler [ 86s] Registering accelerated handler [ 86s] + builtin echo -1 [ 86s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 86s] + '[' ']' [ 86s] + ls /qemu [ 86s] + read f [ 95s] + '[' -f /usr/bin/qemu-arm ']' [ 95s] + builtin echo /usr/bin/qemu-arm already 'presents!' [ 95s] /usr/bin/qemu-arm already presents! [ 95s] + read f [ 95s] + '[' -f /usr/bin/qemu-arm-binfmt ']' [ 95s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!' [ 95s] /usr/bin/qemu-arm-binfmt already presents! [ 95s] + read f [ 95s] + builtin echo All done [ 95s] All done [ 95s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 96s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 96s] + builtin echo 0 [ 96s] + '[' -f /usr/bin/gcc ']' [ 96s] running setup postinstall script [ 96s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 96s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 96s] initializing rpm db... [ 99s] [1/101] installing libmagic-data-5.18-6.2 [ 100s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 100s] [2/101] installing libstdc++-locale-4.9.2-7.11 [ 101s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 101s] [3/101] installing setup-0.9-8.3 [ 102s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 103s] [4/101] installing terminfo-base-5.9-4.12 [ 104s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 104s] [5/101] installing filesystem-3.1-9.1 [ 118s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 118s] [6/101] installing glibc-2.21-7.2 [ 121s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 123s] [7/101] installing libatomic-4.9.2-7.11 [ 123s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 123s] [8/101] installing libgcc_s1-4.9.2-7.11 [ 123s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 124s] [9/101] installing libgomp-4.9.2-7.11 [ 124s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 125s] [10/101] installing bash-4.3.30-14.3 [ 128s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 128s] [11/101] installing cpio-2.11-5.8 [ 128s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 128s] [12/101] installing diffutils-3.3-5.7 [ 128s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 128s] [13/101] installing findutils-4.5.14-5.1 [ 128s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 128s] [14/101] installing gawk-4.1.1-5.2 [ 129s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 129s] [15/101] installing hostname-3.12-4.7 [ 129s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 129s] [16/101] installing libattr-2.4.47-6.10 [ 129s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 129s] [17/101] installing libbz2-1.0.6-5.56 [ 129s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 129s] [18/101] installing libelf-0.160-5.17 [ 129s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 129s] [19/101] installing libext2fs-1.42.11-7.15 [ 129s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 129s] [20/101] installing libfreebl3-3.17.2-10.5 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [21/101] installing libgdbm-1.11-6.2 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [22/101] installing libgmp-6.0.0-5.7 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [23/101] installing libitm-4.9.2-7.11 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [24/101] installing libltdl-2.4.2-4.9 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [25/101] installing liblua-5.1.4-6.4 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [26/101] installing liblzma-5.1.3-5.2 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [27/101] installing libpcre-8.31-4.8 [ 130s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 130s] [28/101] installing libpopt-1.16-4.8 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [29/101] installing libsmack-1.1.0-9.1 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [30/101] installing libsqlite-3.7.14-8.1 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [31/101] installing libuuid-2.24.2-7.17 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [32/101] installing m4-1.4.17-5.1 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [33/101] installing net-tools-2.0_20121208git-4.9 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [34/101] installing nspr-4.10.7-6.36 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [35/101] installing patch-2.7-4.8 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [36/101] installing pkg-config-0.28-4.9 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [37/101] installing sed-4.2.2-5.2 [ 131s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 131s] [38/101] installing tar-1.27-4.6 [ 132s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 132s] [39/101] installing update-alternatives-1.16.3-5.7 [ 132s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 132s] [40/101] installing which-2.20-4.8 [ 132s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 132s] [41/101] installing zlib-1.2.8-5.2 [ 132s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 132s] [42/101] installing libncurses-5.9-4.12 [ 132s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 132s] [43/101] installing libstdc++-4.9.2-7.11 [ 132s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 134s] [44/101] installing build-compare-2014.11.25-7.3 [ 135s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 135s] [45/101] installing gcc49-info-4.9.2-7.11 [ 135s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 135s] [46/101] installing qemu-linux-user-cross-arm-2.2.0-8.10 [ 137s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 137s] [47/101] installing db4-4.8.30.NC-5.10 [ 138s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 138s] [48/101] installing less-466-5.2 [ 138s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 138s] [49/101] installing libacl-2.2.52-6.2 [ 138s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 138s] [50/101] installing libasan-4.9.2-7.11 [ 138s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 138s] [51/101] installing libasm-0.160-5.17 [ 138s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 138s] [52/101] installing libblkid-2.24.2-7.17 [ 139s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 139s] [53/101] installing libcap-2.24-5.38 [ 139s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 139s] [54/101] installing libmpfr-3.1.2-5.2 [ 141s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 141s] [55/101] installing libreadline-5.2-4.8 [ 142s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 142s] [56/101] installing libubsan-4.9.2-7.11 [ 142s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 142s] [57/101] installing make-4.0-6.1 [ 143s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 143s] [58/101] installing nss-certs-3.17.2-10.5 [ 143s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 143s] [59/101] installing smack-1.1.0-9.1 [ 143s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 143s] [60/101] installing bzip2-1.0.6-5.56 [ 143s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 144s] [61/101] installing grep-2.19-5.1 [ 145s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 145s] [62/101] installing libmagic-5.18-6.2 [ 146s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 146s] [63/101] installing libxml2-2.8.0-6.1 [ 146s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 146s] [64/101] installing xz-5.1.3-5.2 [ 147s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 148s] [65/101] installing binutils-2.25-11.3 [ 150s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 150s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 151s] [66/101] installing libdw-0.160-5.17 [ 151s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 151s] [67/101] installing binutils-gold-2.25-11.3 [ 153s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 153s] update-alternatives: using /usr/bin/ld.gold to provide /usr/bin/ld (ld) in auto mode. [ 154s] [68/101] installing file-5.18-6.2 [ 154s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 155s] [69/101] installing libmount-2.24.2-7.17 [ 156s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 156s] [70/101] installing libmpc-1.0-4.8 [ 156s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 160s] [71/101] installing perl-5.20.0-5.6 [ 194s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 195s] [72/101] installing elfutils-0.160-5.17 [ 195s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 195s] [73/101] installing build-mkbaselibs-20120927-6.1 [ 195s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 195s] [74/101] installing autoconf-2.69-5.2 [ 195s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 195s] [75/101] installing cpp49-4.9.2-7.11 [ 196s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 197s] [76/101] installing cpp-4.9-6.1 [ 197s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 198s] [77/101] installing build-20120927-6.1 [ 198s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 198s] [78/101] installing pam-1.1.6-7.12 [ 200s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 200s] [79/101] installing nss-3.17.2-10.5 [ 201s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 201s] [80/101] installing libsoftokn3-3.17.2-10.5 [ 202s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 202s] [81/101] installing coreutils-8.21-7.1 [ 203s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 203s] [82/101] installing util-linux-2.24.2-7.17 [ 204s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 204s] [83/101] installing rpm-4.11.0.1-26.2 [ 205s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 206s] [84/101] installing linux-glibc-devel-3.10-5.1 [ 206s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 206s] [85/101] installing glibc-locale-2.21-7.2 [ 210s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 213s] [86/101] installing automake-1.14.1-6.1 [ 213s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 214s] [87/101] installing gzip-1.6-4.9 [ 214s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 214s] [88/101] installing tzdata-2014h-5.2 [ 215s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 215s] [89/101] installing rpmlint-mini-1.5-8.21 [ 215s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 216s] [90/101] installing rpm-security-plugin-4.11.0.1-26.2 [ 216s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 216s] [91/101] installing rpmlint-tizen-1.0-4.1 [ 216s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 216s] [92/101] installing glibc-devel-2.21-7.2 [ 216s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 217s] [93/101] installing libtool-2.4.2-4.9 [ 217s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 217s] [94/101] installing libstdc++49-devel-4.9.2-7.11 [ 218s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 219s] [95/101] installing gcc49-4.9.2-7.11 [ 220s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 220s] [96/101] installing gcc49-locale-4.9.2-7.11 [ 221s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 221s] [97/101] installing gcc-4.9-6.1 [ 221s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 221s] [98/101] installing gcc49-c++-4.9.2-7.11 [ 222s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 222s] [99/101] installing gcc-c++-4.9-6.1 [ 222s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 222s] [100/101] installing qemu-accel-armv7l-cross-arm-0.4-13.11 [ 239s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 239s] ++ uname -m [ 239s] + '[' armv7l = armv7l ']' [ 239s] + builtin echo armv7l arch [ 239s] armv7l arch [ 239s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 239s] + /usr/sbin/ldconfig [ 239s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 239s] + did_mount_it= [ 239s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 239s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 239s] + builtin echo Registering accelerated handler [ 239s] Registering accelerated handler [ 239s] + builtin echo -1 [ 239s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 239s] + '[' ']' [ 239s] + ls /qemu [ 239s] + read f [ 239s] + '[' -f /usr/bin/qemu-arm ']' [ 239s] + builtin echo /usr/bin/qemu-arm already 'presents!' [ 239s] /usr/bin/qemu-arm already presents! [ 239s] + read f [ 239s] + '[' -f /usr/bin/qemu-arm-binfmt ']' [ 239s] + builtin echo /usr/bin/qemu-arm-binfmt already 'presents!' [ 239s] /usr/bin/qemu-arm-binfmt already presents! [ 239s] + read f [ 239s] + builtin echo All done [ 239s] All done [ 239s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 239s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 239s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 239s] + builtin echo 0 [ 240s] + '[' -f /usr/bin/gcc ']' [ 240s] ++ LANG=C [ 240s] ++ gcc --version [ 240s] ++ head -1 [ 240s] ++ sed -e 's/^.*gcc[^0-9]*\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*$/\1.\2/' [ 240s] + export GCCVER=4.9 [ 240s] + GCCVER=4.9 [ 240s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 240s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbegin.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbegin.o [ 240s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 240s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbeginS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginS.o [ 240s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 240s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbeginT.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginT.o [ 240s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 240s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtend.o /usr/armv7l-tizen-linux-gnueabi/bin/crtend.o [ 240s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 240s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtendS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtendS.o [ 240s] [101/101] installing rpm-build-4.11.0.1-26.2 [ 240s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 240s] removing nis flags from //etc/nsswitch.conf... [ 240s] now finalizing build dir... [ 240s] qemu: Unsupported syscall: 311 [ 248s] build target is armv7l-tizen-linux [ 248s] ----------------------------------------------------------------- [ 248s] I have the following modifications for pcre.spec: [ 248s] 5c5 [ 248s] < Release: 0 [ 248s] --- [ 248s] > Release: 4.9 [ 248s] 186a187 [ 248s] > %changelog [ 248s] ----------------------------------------------------------------- [ 248s] ----- building pcre.spec (user abuild) [ 248s] ----------------------------------------------------------------- [ 248s] ----------------------------------------------------------------- [ 248s] qemu: Unsupported syscall: 311 [ 248s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Common/arm-x11/cce6791f9c5603c331c4591bd201eed1-pcre' /home/abuild/rpmbuild/SOURCES/pcre.spec [ 249s] Building target platforms: armv7l-tizen-linux [ 249s] Building for target armv7l-tizen-linux [ 249s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.SSCvec [ 249s] + umask 022 [ 249s] + cd /home/abuild/rpmbuild/BUILD [ 249s] + cd /home/abuild/rpmbuild/BUILD [ 249s] + rm -rf pcre-8.31 [ 249s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/pcre-8.31.tar.bz2 [ 249s] + /bin/tar -xf - [ 249s] + STATUS=0 [ 249s] + '[' 0 -ne 0 ']' [ 249s] + cd pcre-8.31 [ 249s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 249s] + echo 'Patch #0 (0001-visibility.patch):' [ 249s] Patch #0 (0001-visibility.patch): [ 249s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-visibility.patch [ 249s] + /bin/patch -p1 --fuzz=2 [ 249s] patching file Makefile.am [ 249s] patching file configure.ac [ 249s] patching file m4/visibility.m4 [ 249s] + cp /home/abuild/rpmbuild/SOURCES/pcre.manifest . [ 249s] + exit 0 [ 249s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Nmr28y [ 249s] + umask 022 [ 249s] + cd /home/abuild/rpmbuild/BUILD [ 249s] + cd pcre-8.31 [ 249s] ++ uname -m [ 249s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 249s] + LANG=C [ 249s] + export LANG [ 249s] + unset DISPLAY [ 249s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 249s] + export CFLAGS [ 249s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 249s] + export CXXFLAGS [ 249s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -I%_fmoddir' [ 249s] + export FFLAGS [ 249s] + LD_AS_NEEDED=1 [ 249s] + export LD_AS_NEEDED [ 249s] + autoreconf -fiv [ 252s] autoreconf: Entering directory `.' [ 252s] autoreconf: configure.ac: not using Gettext [ 253s] autoreconf: running: aclocal --force -I m4 [ 263s] autoreconf: configure.ac: tracing [ 265s] autoreconf: running: libtoolize --copy --force [ 265s] libtoolize: putting auxiliary files in `.'. [ 265s] libtoolize: copying file `./ltmain.sh' [ 265s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 265s] libtoolize: copying file `m4/libtool.m4' [ 265s] libtoolize: copying file `m4/ltoptions.m4' [ 265s] libtoolize: copying file `m4/ltsugar.m4' [ 265s] libtoolize: copying file `m4/ltversion.m4' [ 266s] libtoolize: copying file `m4/lt~obsolete.m4' [ 275s] autoreconf: running: /usr/bin/autoconf --force [ 280s] autoreconf: running: /usr/bin/autoheader --force [ 282s] autoreconf: running: automake --add-missing --copy --force-missing [ 286s] configure.ac:48: installing './compile' [ 289s] parallel-tests: installing './test-driver' [ 289s] autoreconf: Leaving directory `.' [ 289s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 289s] + export CFLAGS [ 289s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g' [ 289s] + export CXXFLAGS [ 289s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -I%_fmoddir' [ 289s] + export FFLAGS [ 289s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-jit --enable-static --with-link-size=2 --with-match-limit=10000000 --enable-newline-is-lf --enable-utf8 --enable-unicode-properties [ 290s] checking for a BSD-compatible install... /bin/install -c [ 290s] checking whether build environment is sane... yes [ 290s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 290s] checking for gawk... gawk [ 290s] checking whether make sets $(MAKE)... yes [ 290s] checking whether make supports nested variables... yes [ 290s] checking whether make supports nested variables... (cached) yes [ 290s] checking for style of include used by make... GNU [ 290s] checking for armv7l-tizen-linux-gnueabi-gcc... no [ 290s] checking for gcc... gcc [ 290s] checking whether the C compiler works... yes [ 290s] checking for C compiler default output file name... a.out [ 290s] checking for suffix of executables... [ 291s] checking whether we are cross compiling... no [ 291s] checking for suffix of object files... o [ 291s] checking whether we are using the GNU C compiler... yes [ 291s] checking whether gcc accepts -g... yes [ 291s] checking for gcc option to accept ISO C89... none needed [ 291s] checking whether gcc understands -c and -o together... yes [ 291s] checking dependency style of gcc... gcc3 [ 291s] checking for gcc option to accept ISO C99... -std=gnu99 [ 291s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 291s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 291s] checking for grep that handles long lines and -e... /bin/grep [ 291s] checking for egrep... /bin/grep -E [ 291s] checking for ANSI C header files... yes [ 292s] checking for sys/types.h... yes [ 292s] checking for sys/stat.h... yes [ 292s] checking for stdlib.h... yes [ 292s] checking for string.h... yes [ 292s] checking for memory.h... yes [ 292s] checking for strings.h... yes [ 292s] checking for inttypes.h... yes [ 292s] checking for stdint.h... yes [ 292s] checking for unistd.h... yes [ 292s] checking minix/config.h usability... no [ 292s] checking minix/config.h presence... no [ 292s] checking for minix/config.h... no [ 292s] checking whether it is safe to define __EXTENSIONS__... yes [ 292s] checking for special C compiler options needed for large files... no [ 292s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 292s] checking for armv7l-tizen-linux-gnueabi-g++... no [ 292s] checking for armv7l-tizen-linux-gnueabi-c++... no [ 292s] checking for armv7l-tizen-linux-gnueabi-gpp... no [ 292s] checking for armv7l-tizen-linux-gnueabi-aCC... no [ 292s] checking for armv7l-tizen-linux-gnueabi-CC... no [ 292s] checking for armv7l-tizen-linux-gnueabi-cxx... no [ 292s] checking for armv7l-tizen-linux-gnueabi-cc++... no [ 292s] checking for armv7l-tizen-linux-gnueabi-cl.exe... no [ 292s] checking for armv7l-tizen-linux-gnueabi-FCC... no [ 292s] checking for armv7l-tizen-linux-gnueabi-KCC... no [ 292s] checking for armv7l-tizen-linux-gnueabi-RCC... no [ 292s] checking for armv7l-tizen-linux-gnueabi-xlC_r... no [ 292s] checking for armv7l-tizen-linux-gnueabi-xlC... no [ 292s] checking for g++... g++ [ 292s] checking whether we are using the GNU C++ compiler... yes [ 292s] checking whether g++ accepts -g... yes [ 292s] checking dependency style of g++... gcc3 [ 292s] checking whether the -Werror option is usable... yes [ 292s] checking for simple visibility declarations... yes [ 293s] checking for int64_t... yes [ 293s] checking build system type... armv7l-tizen-linux-gnueabi [ 293s] checking host system type... armv7l-tizen-linux-gnueabi [ 293s] checking how to print strings... printf [ 293s] checking for a sed that does not truncate output... /bin/sed [ 293s] checking for fgrep... /bin/grep -F [ 293s] checking for ld used by gcc -std=gnu99... /emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld [ 293s] checking if the linker (/emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 293s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 293s] checking the name lister (/bin/nm -B) interface... BSD nm [ 293s] checking whether ln -s works... yes [ 293s] checking the maximum length of command line arguments... 1572864 [ 293s] checking whether the shell understands some XSI constructs... yes [ 293s] checking whether the shell understands "+="... yes [ 293s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 293s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 293s] checking for /emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 293s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 293s] checking for objdump... objdump [ 293s] checking how to recognize dependent libraries... pass_all [ 293s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 293s] checking for dlltool... no [ 293s] checking how to associate runtime and link libraries... printf %s\n [ 293s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 293s] checking for ar... ar [ 293s] checking for archiver @FILE support... @ [ 293s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 293s] checking for strip... strip [ 293s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 293s] checking for ranlib... ranlib [ 293s] checking command to parse /bin/nm -B output from gcc -std=gnu99 object... ok [ 293s] checking for sysroot... no [ 293s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 293s] checking for mt... no [ 293s] checking if : is a manifest tool... no [ 293s] checking for dlfcn.h... yes [ 293s] checking for objdir... .libs [ 293s] checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no [ 293s] checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC [ 293s] checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes [ 293s] checking if gcc -std=gnu99 static flag -static works... no [ 293s] checking if gcc -std=gnu99 supports -c -o file.o... yes [ 293s] checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes [ 294s] checking whether the gcc -std=gnu99 linker (/emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 294s] checking whether -lc should be explicitly linked in... no [ 294s] checking dynamic linker characteristics... GNU/Linux ld.so [ 294s] checking how to hardcode library paths into programs... immediate [ 294s] checking whether stripping libraries is possible... yes [ 294s] checking if libtool supports shared libraries... yes [ 294s] checking whether to build shared libraries... yes [ 294s] checking whether to build static libraries... yes [ 294s] checking how to run the C++ preprocessor... g++ -E [ 294s] checking for ld used by g++... /emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld [ 294s] checking if the linker (/emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 294s] checking whether the g++ linker (/emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 294s] checking for g++ option to produce PIC... -fPIC -DPIC [ 295s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 295s] checking if g++ static flag -static works... no [ 295s] checking if g++ supports -c -o file.o... yes [ 295s] checking if g++ supports -c -o file.o... (cached) yes [ 295s] checking whether the g++ linker (/emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 295s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 295s] checking how to hardcode library paths into programs... immediate [ 295s] checking whether ln -s works... yes [ 295s] checking for ANSI C header files... (cached) yes [ 295s] checking limits.h usability... yes [ 295s] checking limits.h presence... yes [ 295s] checking for limits.h... yes [ 295s] checking for sys/types.h... (cached) yes [ 295s] checking for sys/stat.h... (cached) yes [ 295s] checking dirent.h usability... yes [ 295s] checking dirent.h presence... yes [ 295s] checking for dirent.h... yes [ 295s] checking windows.h usability... no [ 295s] checking windows.h presence... no [ 295s] checking for windows.h... no [ 295s] checking for alias support in the linker... no [ 295s] checking for alias support in the linker... no [ 296s] checking string usability... yes [ 296s] checking string presence... yes [ 296s] checking for string... yes [ 296s] checking bits/type_traits.h usability... no [ 296s] checking bits/type_traits.h presence... no [ 296s] checking for bits/type_traits.h... no [ 296s] checking type_traits.h usability... no [ 296s] checking type_traits.h presence... no [ 296s] checking for type_traits.h... no [ 296s] checking for strtoq... yes [ 296s] checking for long long... yes [ 296s] checking for unsigned long long... yes [ 296s] checking for an ANSI C-conforming const... yes [ 296s] checking for size_t... yes [ 296s] checking for bcopy... yes [ 297s] checking for memmove... yes [ 297s] checking for strerror... yes [ 297s] checking zlib.h usability... no [ 297s] checking zlib.h presence... no [ 297s] checking for zlib.h... no [ 297s] checking for gzopen in -lz... no [ 297s] checking bzlib.h usability... no [ 297s] checking bzlib.h presence... no [ 297s] checking for bzlib.h... no [ 297s] checking for libbz2... no [ 297s] checking that generated files are newer than configure... done [ 297s] configure: creating ./config.status [ 298s] config.status: creating Makefile [ 298s] config.status: creating libpcre.pc [ 298s] config.status: creating libpcre16.pc [ 298s] config.status: creating libpcreposix.pc [ 298s] config.status: creating libpcrecpp.pc [ 298s] config.status: creating pcre-config [ 298s] config.status: creating pcre.h [ 299s] config.status: creating pcre_stringpiece.h [ 299s] config.status: creating pcrecpparg.h [ 299s] config.status: creating config.h [ 299s] config.status: executing depfiles commands [ 300s] config.status: executing libtool commands [ 300s] config.status: executing script-chmod commands [ 300s] config.status: executing delete-old-chartables commands [ 300s] [ 300s] pcre-8.31 configuration summary: [ 300s] [ 300s] Install prefix .................. : /usr [ 300s] C preprocessor .................. : gcc -std=gnu99 -E [ 300s] C compiler ...................... : gcc -std=gnu99 [ 300s] C++ preprocessor ................ : g++ -E [ 300s] C++ compiler .................... : g++ [ 300s] Linker .......................... : /emul/i586-for-arm//usr/arm-tizen-linux-gnueabi/bin/ld [ 300s] C preprocessor flags ............ : [ 300s] C compiler flags ................ : -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g [ 300s] C++ compiler flags .............. : -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g [ 300s] Linker flags .................... : [ 300s] Extra libraries ................. : [ 300s] [ 300s] Build 8 bit pcre library ........ : yes [ 300s] Build 16 bit pcre library ....... : no [ 300s] Build C++ library ............... : yes [ 300s] Enable JIT compiling support .... : yes [ 300s] Enable UTF-8/16 support ......... : yes [ 300s] Unicode properties .............. : yes [ 300s] Newline char/sequence ........... : lf [ 300s] \R matches only ANYCRLF ......... : no [ 300s] EBCDIC coding ................... : no [ 300s] Rebuild char tables ............. : no [ 300s] Use stack recursion ............. : yes [ 300s] POSIX mem threshold ............. : 10 [ 300s] Internal link size .............. : 2 [ 300s] Match limit ..................... : 10000000 [ 300s] Match limit recursion ........... : MATCH_LIMIT [ 300s] Build shared libs ............... : yes [ 300s] Build static libs ............... : yes [ 300s] Use JIT in pcregrep ............. : yes [ 300s] Buffer size for pcregrep ........ : 20480 [ 300s] Link pcregrep with libz ......... : no [ 300s] Link pcregrep with libbz2 ....... : no [ 300s] Link pcretest with libedit ...... : no [ 300s] Link pcretest with libreadline .. : no [ 300s] [ 300s] + make -j4 [ 300s] rm -f pcre_chartables.c [ 300s] ln -s ./pcre_chartables.c.dist pcre_chartables.c [ 300s] make all-am [ 300s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 300s] CC libpcre_la-pcre_byte_order.lo [ 300s] CC libpcre_la-pcre_config.lo [ 300s] CC libpcre_la-pcre_dfa_exec.lo [ 300s] CC libpcre_la-pcre_compile.lo [ 300s] CC libpcre_la-pcre_exec.lo [ 300s] CC libpcre_la-pcre_fullinfo.lo [ 300s] CC libpcre_la-pcre_get.lo [ 301s] CC libpcre_la-pcre_globals.lo [ 301s] CC libpcre_la-pcre_jit_compile.lo [ 301s] In file included from sljit/sljitLir.c:1247:0, [ 301s] from pcre_jit_compile.c:62: [ 301s] sljit/sljitNativeARM_Thumb2.c: In function 'getput_arg': [ 301s] sljit/sljitNativeARM_Thumb2.c:1018:6: warning: variable 'tmp_r' set but not used [-Wunused-but-set-variable] [ 301s] int tmp_r; [ 301s] ^ [ 304s] CC libpcre_la-pcre_maketables.lo [ 304s] CC libpcre_la-pcre_newline.lo [ 304s] CC libpcre_la-pcre_ord2utf8.lo [ 304s] CC libpcre_la-pcre_refcount.lo [ 304s] CC libpcre_la-pcre_string_utils.lo [ 304s] CC libpcre_la-pcre_study.lo [ 305s] CC libpcre_la-pcre_tables.lo [ 305s] CC libpcre_la-pcre_ucd.lo [ 305s] CC libpcre_la-pcre_valid_utf8.lo [ 306s] CC libpcre_la-pcre_version.lo [ 306s] CC libpcre_la-pcre_xclass.lo [ 306s] CC libpcre_la-pcre_chartables.lo [ 306s] CC libpcreposix_la-pcreposix.lo [ 306s] CXX libpcrecpp_la-pcrecpp.lo [ 306s] CXX libpcrecpp_la-pcre_scanner.lo [ 307s] CXX libpcrecpp_la-pcre_stringpiece.lo [ 307s] CC pcretest.o [ 308s] CC pcre_printint.o [ 308s] CC pcregrep-pcregrep.o [ 309s] CC pcre_jit_test.o [ 309s] CXX pcrecpp_unittest.o [ 309s] CXX pcre_scanner_unittest.o [ 309s] CXX pcre_stringpiece_unittest.o [ 313s] CCLD libpcre.la [ 314s] CCLD libpcreposix.la [ 314s] CXXLD libpcrecpp.la [ 314s] CCLD pcre_jit_test [ 314s] CCLD pcretest [ 314s] CCLD pcregrep [ 314s] CXXLD pcrecpp_unittest [ 314s] CXXLD pcre_scanner_unittest [ 314s] CXXLD pcre_stringpiece_unittest [ 315s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 315s] + exit 0 [ 315s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aA2VuW [ 315s] + umask 022 [ 315s] + cd /home/abuild/rpmbuild/BUILD [ 315s] + cd pcre-8.31 [ 315s] + LANG=C [ 315s] + export LANG [ 315s] + unset DISPLAY [ 315s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm [ 315s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm [ 315s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm install [ 315s] /bin/make install-am [ 315s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 315s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 315s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib' [ 315s] /bin/sh ./libtool --mode=install /bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib' [ 315s] libtool: install: /bin/install -c .libs/libpcre.so.1.0.1 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcre.so.1.0.1 [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib && { ln -s -f libpcre.so.1.0.1 libpcre.so.1 || { rm -f libpcre.so.1 && ln -s libpcre.so.1.0.1 libpcre.so.1; }; }) [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib && { ln -s -f libpcre.so.1.0.1 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.1.0.1 libpcre.so; }; }) [ 315s] libtool: install: /bin/install -c .libs/libpcre.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcre.la [ 315s] libtool: install: warning: relinking `libpcreposix.la' [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.31; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.31/libtool --silent --tag CC --mode=relink gcc -std=gnu99 -fvisibility=hidden -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -no-undefined -version-info 0:1:0 -o libpcreposix.la -rpath /usr/lib libpcreposix_la-pcreposix.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm) [ 315s] libtool: install: /bin/install -c .libs/libpcreposix.so.0.0.1T /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcreposix.so.0.0.1 [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.1 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.1 libpcreposix.so.0; }; }) [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib && { ln -s -f libpcreposix.so.0.0.1 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.1 libpcreposix.so; }; }) [ 315s] libtool: install: /bin/install -c .libs/libpcreposix.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcreposix.la [ 315s] libtool: install: warning: relinking `libpcrecpp.la' [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/pcre-8.31; /bin/sh /home/abuild/rpmbuild/BUILD/pcre-8.31/libtool --silent --tag CXX --mode=relink g++ -fvisibility=hidden -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -finline-functions -fdiagnostics-color=never -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -Wp,-D__SOFTFP__ -g -no-undefined -version-info 0:0:0 -o libpcrecpp.la -rpath /usr/lib libpcrecpp_la-pcrecpp.lo libpcrecpp_la-pcre_scanner.lo libpcrecpp_la-pcre_stringpiece.lo libpcre.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm) [ 315s] libtool: install: /bin/install -c .libs/libpcrecpp.so.0.0.0T /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcrecpp.so.0.0.0 [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so.0; }; }) [ 315s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so; }; }) [ 315s] libtool: install: /bin/install -c .libs/libpcrecpp.lai /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcrecpp.la [ 315s] libtool: install: /bin/install -c .libs/libpcre.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcre.a [ 315s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcre.a [ 315s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcre.a [ 315s] libtool: install: /bin/install -c .libs/libpcreposix.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcreposix.a [ 315s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcreposix.a [ 315s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcreposix.a [ 315s] libtool: install: /bin/install -c .libs/libpcrecpp.a /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcrecpp.a [ 315s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcrecpp.a [ 315s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcrecpp.a [ 315s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 315s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin' [ 316s] /bin/sh ./libtool --mode=install /bin/install -c pcretest pcregrep '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin' [ 316s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 316s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 316s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.31/libpcre.la' has not been installed in `/usr/lib' [ 316s] libtool: install: /bin/install -c .libs/pcretest /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin/pcretest [ 316s] libtool: install: warning: `libpcre.la' has not been installed in `/usr/lib' [ 316s] libtool: install: warning: `libpcreposix.la' has not been installed in `/usr/lib' [ 316s] libtool: install: warning: `/home/abuild/rpmbuild/BUILD/pcre-8.31/libpcre.la' has not been installed in `/usr/lib' [ 316s] libtool: install: /bin/install -c .libs/pcregrep /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin/pcregrep [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin' [ 316s] /bin/install -c pcre-config '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre' [ 316s] /bin/install -c -m 644 doc/pcre.txt doc/pcre-config.txt doc/pcregrep.txt doc/pcretest.txt AUTHORS COPYING ChangeLog LICENCE NEWS README '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre/html' [ 316s] /bin/install -c -m 644 doc/html/index.html doc/html/pcre.html doc/html/pcre16.html doc/html/pcre-config.html doc/html/pcre_assign_jit_stack.html doc/html/pcre_compile.html doc/html/pcre_compile2.html doc/html/pcre_config.html doc/html/pcre_copy_named_substring.html doc/html/pcre_copy_substring.html doc/html/pcre_dfa_exec.html doc/html/pcre_exec.html doc/html/pcre_free_study.html doc/html/pcre_free_substring.html doc/html/pcre_free_substring_list.html doc/html/pcre_fullinfo.html doc/html/pcre_get_named_substring.html doc/html/pcre_get_stringnumber.html doc/html/pcre_get_stringtable_entries.html doc/html/pcre_get_substring.html doc/html/pcre_get_substring_list.html doc/html/pcre_jit_stack_alloc.html doc/html/pcre_jit_stack_free.html doc/html/pcre_maketables.html doc/html/pcre_pattern_to_host_byte_order.html doc/html/pcre_refcount.html doc/html/pcre_study.html doc/html/pcre_utf16_to_host_byte_order.html doc/html/pcre_version.html doc/html/pcreapi.html doc/html/pcrebuild.html doc/html/pcrecallout.html doc/html/pcrecompat.html doc/html/pcredemo.html doc/html/pcregrep.html doc/html/pcrejit.html doc/html/pcrelimits.html doc/html/pcrematching.html doc/html/pcrepartial.html doc/html/pcrepattern.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre/html' [ 316s] /bin/install -c -m 644 doc/html/pcreperform.html doc/html/pcreposix.html doc/html/pcreprecompile.html doc/html/pcresample.html doc/html/pcrestack.html doc/html/pcresyntax.html doc/html/pcretest.html doc/html/pcreunicode.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre/html' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre/html' [ 316s] /bin/install -c -m 644 doc/html/pcrecpp.html '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre/html' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/include' [ 316s] /bin/install -c -m 644 pcreposix.h pcrecpp.h pcre_scanner.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/include' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man1' [ 316s] /bin/install -c -m 644 doc/pcre-config.1 doc/pcregrep.1 doc/pcretest.1 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man1' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3' [ 316s] /bin/install -c -m 644 doc/pcre.3 doc/pcre16.3 doc/pcre_assign_jit_stack.3 doc/pcre_compile.3 doc/pcre_compile2.3 doc/pcre_config.3 doc/pcre_copy_named_substring.3 doc/pcre_copy_substring.3 doc/pcre_dfa_exec.3 doc/pcre_exec.3 doc/pcre_free_study.3 doc/pcre_free_substring.3 doc/pcre_free_substring_list.3 doc/pcre_fullinfo.3 doc/pcre_get_named_substring.3 doc/pcre_get_stringnumber.3 doc/pcre_get_stringtable_entries.3 doc/pcre_get_substring.3 doc/pcre_get_substring_list.3 doc/pcre_jit_stack_alloc.3 doc/pcre_jit_stack_free.3 doc/pcre_maketables.3 doc/pcre_pattern_to_host_byte_order.3 doc/pcre_refcount.3 doc/pcre_study.3 doc/pcre_utf16_to_host_byte_order.3 doc/pcre_version.3 doc/pcreapi.3 doc/pcrebuild.3 doc/pcrecallout.3 doc/pcrecompat.3 doc/pcrejit.3 doc/pcrelimits.3 doc/pcrematching.3 doc/pcrepartial.3 doc/pcrepattern.3 doc/pcreperform.3 doc/pcreposix.3 doc/pcreprecompile.3 doc/pcresample.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3' [ 316s] /bin/install -c -m 644 doc/pcrestack.3 doc/pcresyntax.3 doc/pcreunicode.3 doc/pcrecpp.3 '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/include' [ 316s] /bin/install -c -m 644 pcre.h pcrecpparg.h pcre_stringpiece.h '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/include' [ 316s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/pkgconfig' [ 316s] /bin/install -c -m 644 libpcre.pc libpcreposix.pc libpcrecpp.pc '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/pkgconfig' [ 316s] /bin/make install-data-hook [ 316s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 316s] ln -sf pcre_assign_jit_stack.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_assign_jit_stack.3 [ 316s] ln -sf pcre_compile.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_compile.3 [ 316s] ln -sf pcre_compile2.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_compile2.3 [ 316s] ln -sf pcre_config.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_config.3 [ 316s] ln -sf pcre_copy_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_copy_named_substring.3 [ 316s] ln -sf pcre_copy_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_copy_substring.3 [ 316s] ln -sf pcre_dfa_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_dfa_exec.3 [ 316s] ln -sf pcre_exec.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_exec.3 [ 316s] ln -sf pcre_free_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_free_study.3 [ 316s] ln -sf pcre_free_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_free_substring.3 [ 316s] ln -sf pcre_free_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_free_substring_list.3 [ 316s] ln -sf pcre_fullinfo.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_fullinfo.3 [ 316s] ln -sf pcre_get_named_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_get_named_substring.3 [ 316s] ln -sf pcre_get_stringnumber.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_get_stringnumber.3 [ 316s] ln -sf pcre_get_stringtable_entries.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_get_stringtable_entries.3 [ 316s] ln -sf pcre_get_substring.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_get_substring.3 [ 316s] ln -sf pcre_get_substring_list.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_get_substring_list.3 [ 316s] ln -sf pcre_jit_stack_alloc.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_jit_stack_alloc.3 [ 316s] ln -sf pcre_jit_stack_free.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_jit_stack_free.3 [ 316s] ln -sf pcre_maketables.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_maketables.3 [ 316s] ln -sf pcre_pattern_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_pattern_to_host_byte_order.3 [ 316s] ln -sf pcre_refcount.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_refcount.3 [ 316s] ln -sf pcre_study.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_study.3 [ 316s] ln -sf pcre_utf16_to_host_byte_order.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_utf16_to_host_byte_order.3 [ 316s] ln -sf pcre_version.3 /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/man/man3/pcre16_version.3 [ 316s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 316s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 316s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/pcre-8.31' [ 316s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/info/dir [ 316s] + find /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm -regex '.*\.la$' [ 316s] + xargs rm -f -- [ 316s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm//usr/share/doc/packages [ 316s] + mv /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/pcre /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm//usr/share/doc/packages/pcre-doc [ 316s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/*.la' [ 316s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/pcre-8.31 [ 316s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin/pcregrep [ 317s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/bin/pcretest [ 317s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcre.so.1.0.1 [ 317s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcrecpp.so.0.0.0 [ 317s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/lib/libpcreposix.so.0.0.1 [ 318s] cpio: gcc-4.9.2/libgcc/config/arm/lib1funcs.S: Cannot stat: No such file or directory [ 318s] cpio: gcc-4.9.2/obj-armv7l-tizen-linux-gnueabi/armv7l-tizen-linux-gnueabi/libgcc: Cannot stat: No such file or directory [ 318s] cpio: glibc-2.21/csu: Cannot stat: No such file or directory [ 318s] cpio: glibc-2.21/csu/elf-init.c: Cannot stat: No such file or directory [ 318s] cpio: glibc-2.21/csu/init.c: Cannot stat: No such file or directory [ 318s] cpio: glibc-2.21/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 318s] cpio: glibc-2.21/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 318s] cpio: glibc-2.21/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 318s] 3546 blocks [ 318s] + /usr/lib/rpm/brp-compress [ 319s] + /usr/lib/rpm/brp-tizen [ 319s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm [ 319s] Processing files: pcre-debugsource-8.31-4.9.armv7l [ 319s] Provides: pcre-debugsource = 8.31-4.9 pcre-debugsource(armv7l-32) = 8.31-4.9 [ 319s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 319s] Processing files: pcre-devel-8.31-4.9.armv7l [ 319s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 319s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 319s] [ 320s] Provides: pcre-devel = 8.31-4.9 pcre-devel(armv7l-32) = 8.31-4.9 pkgconfig(libpcre) = 8.31 pkgconfig(libpcrecpp) = 8.31 pkgconfig(libpcreposix) = 8.31 [ 320s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 320s] Requires: /bin/sh /usr/bin/pkg-config pkgconfig(libpcre) [ 320s] Processing files: pcre-devel-static-8.31-4.9.armv7l [ 320s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 320s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 320s] [ 320s] Provides: pcre-devel-static = 8.31-4.9 pcre-devel-static(armv7l-32) = 8.31-4.9 [ 320s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 320s] Processing files: libpcre-8.31-4.9.armv7l [ 320s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 320s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 320s] [ 320s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.JDOzuD [ 320s] + umask 022 [ 320s] + cd /home/abuild/rpmbuild/BUILD [ 320s] + cd pcre-8.31 [ 320s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcre [ 320s] + export LICENSEDIR [ 320s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcre [ 320s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcre [ 320s] + exit 0 [ 320s] Provides: libpcre = 8.31-4.9 libpcre(armv7l-32) = 8.31-4.9 libpcre.so.1 pcre = 8.31 [ 320s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 320s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 320s] Requires(post): /sbin/ldconfig [ 320s] Requires(postun): /sbin/ldconfig [ 320s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 320s] Obsoletes: pcre < 8.31 [ 320s] Processing files: libpcreposix-8.31-4.9.armv7l [ 320s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 320s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 320s] [ 320s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SEBiOk [ 320s] + umask 022 [ 320s] + cd /home/abuild/rpmbuild/BUILD [ 320s] + cd pcre-8.31 [ 320s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcreposix [ 320s] + export LICENSEDIR [ 320s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcreposix [ 320s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcreposix [ 320s] + exit 0 [ 320s] Provides: libpcreposix = 8.31-4.9 libpcreposix(armv7l-32) = 8.31-4.9 libpcreposix.so.0 [ 320s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 320s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 320s] Requires(post): /sbin/ldconfig [ 320s] Requires(postun): /sbin/ldconfig [ 320s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 [ 320s] Processing files: libpcrecpp-8.31-4.9.armv7l [ 320s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 320s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 320s] [ 320s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.x9rHq2 [ 320s] + umask 022 [ 320s] + cd /home/abuild/rpmbuild/BUILD [ 320s] + cd pcre-8.31 [ 320s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcrecpp [ 320s] + export LICENSEDIR [ 320s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcrecpp [ 320s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/libpcrecpp [ 320s] + exit 0 [ 320s] Provides: libpcrecpp = 8.31-4.9 libpcrecpp(armv7l-32) = 8.31-4.9 libpcrecpp.so.0 [ 320s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 320s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 320s] Requires(post): /sbin/ldconfig [ 320s] Requires(postun): /sbin/ldconfig [ 320s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libpcre.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9) [ 320s] Processing files: pcre-doc-8.31-4.9.noarch [ 320s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 320s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 320s] [ 320s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.AEpHmK [ 320s] + umask 022 [ 320s] + cd /home/abuild/rpmbuild/BUILD [ 320s] + cd pcre-8.31 [ 320s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/packages/pcre-doc [ 320s] + export DOCDIR [ 320s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/packages/pcre-doc [ 320s] + cp -pr doc/html /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/packages/pcre-doc [ 320s] + cp -pr doc/pcre-config.txt doc/pcre.txt doc/pcregrep.txt doc/pcretest.txt doc/perltest.txt /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/doc/packages/pcre-doc [ 320s] + exit 0 [ 320s] Provides: pcre-doc = 8.31-4.9 [ 320s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 320s] Processing files: pcre-tools-8.31-4.9.armv7l [ 320s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 320s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 320s] [ 320s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.dWqrbt [ 320s] + umask 022 [ 320s] + cd /home/abuild/rpmbuild/BUILD [ 320s] + cd pcre-8.31 [ 320s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/pcre-tools [ 320s] + export LICENSEDIR [ 320s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/pcre-tools [ 320s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm/usr/share/licenses/pcre-tools [ 320s] + exit 0 [ 321s] Provides: pcre-tools = 8.31-4.9 pcre-tools(armv7l-32) = 8.31-4.9 [ 321s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 321s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpcre.so.1 libpcreposix.so.0 [ 321s] Processing files: libpcre-debuginfo-8.31-4.9.armv7l [ 321s] Provides: debuginfo(build-id) = 6fbf941f3ca90397b3e6dd29bdcfb81bf4bfd629 [ 321s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 321s] Processing files: libpcreposix-debuginfo-8.31-4.9.armv7l [ 321s] Provides: debuginfo(build-id) = 40fa1d5c7c67333d349f2b35f16f8a1981802462 [ 321s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 321s] Processing files: libpcrecpp-debuginfo-8.31-4.9.armv7l [ 321s] Provides: debuginfo(build-id) = 07b7be6fd376c893680fd4da843c9297d8944c5b [ 321s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 321s] Processing files: pcre-tools-debuginfo-8.31-4.9.armv7l [ 321s] warning: File listed twice: /usr/lib/debug/.build-id [ 321s] Provides: debuginfo(build-id) = 184ada6ba22c83b114c5a394ed5ff04cd6a9da1d debuginfo(build-id) = bd464f3e8712912e2a491faddfb8c32d86d7ac4c [ 321s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 321s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm [ 321s] warning: Could not canonicalize hostname: w27 [ 321s] Wrote: /home/abuild/rpmbuild/SRPMS/pcre-8.31-4.9.src.rpm [ 321s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.31-4.9.armv7l.rpm [ 321s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.31-4.9.armv7l.rpm [ 322s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.31-4.9.armv7l.rpm [ 322s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.31-4.9.armv7l.rpm [ 322s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.31-4.9.armv7l.rpm [ 322s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.31-4.9.armv7l.rpm [ 323s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.31-4.9.noarch.rpm [ 323s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.31-4.9.armv7l.rpm [ 323s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.31-4.9.armv7l.rpm [ 323s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.31-4.9.armv7l.rpm [ 323s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.31-4.9.armv7l.rpm [ 323s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.31-4.9.armv7l.rpm [ 323s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.anpODc [ 323s] + umask 022 [ 323s] + cd /home/abuild/rpmbuild/BUILD [ 323s] + cd pcre-8.31 [ 323s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pcre-8.31-4.9.arm [ 323s] + exit 0 [ 323s] ... checking for files with abuild user/group [ 324s] [ 324s] RPMLINT report: [ 324s] =============== [ 324s] qemu: Unsupported syscall: 311 [ 339s] pcre-devel.armv7l: W: rpath-in-buildconfig /usr/bin/pcre-config lines ['37'] [ 339s] This build configuration file contains rpaths which will be introduced into [ 339s] dependent packages. [ 339s] [ 339s] pcre-doc.noarch: E: license-file-in-docs (Badness: 200) /usr/share/doc/packages/pcre-doc/COPYING [ 339s] A file whose name suggests that it contains a license is included in the [ 339s] package as a document. Such files need to be marked with %license and not with [ 339s] %doc, which will install them in a special directory seperated from the [ 339s] documentation. [ 339s] [ 339s] 8 packages and 0 specfiles checked; 1 errors, 1 warnings. [ 339s] [ 339s] ... creating baselibs [ 339s] qemu: Unsupported syscall: 311 [ 340s] no targets for arch armv7l, nothing to do [ 340s] ... comparing built packages with the former built [ 340s] /usr/lib/build/rpm-check.sh [ 340s] compare /.build.oldpackages/pcre-8.31-4.8.src.rpm /home/abuild/rpmbuild/SRPMS/pcre-8.31-4.9.src.rpm [ 342s] comparing rpmtags [ 342s] comparing RELEASE [ 344s] comparing PROVIDES [ 344s] comparing scripts [ 344s] comparing filelist [ 345s] comparing file checksum [ 348s] compare /.build.oldpackages/libpcre-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.31-4.9.armv7l.rpm [ 348s] comparing rpmtags [ 348s] comparing RELEASE [ 348s] comparing PROVIDES [ 348s] comparing scripts [ 348s] comparing filelist [ 348s] comparing file checksum [ 348s] creating rename script [ 348s] RPM meta information is identical [ 348s] compare /.build.oldpackages/libpcre-debuginfo-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.31-4.9.armv7l.rpm [ 348s] skipping -debuginfo package [ 348s] compare /.build.oldpackages/libpcrecpp-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.31-4.9.armv7l.rpm [ 349s] comparing rpmtags [ 349s] comparing RELEASE [ 349s] comparing PROVIDES [ 349s] comparing scripts [ 349s] comparing filelist [ 349s] comparing file checksum [ 349s] creating rename script [ 349s] RPM meta information is identical [ 349s] compare /.build.oldpackages/libpcrecpp-debuginfo-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.31-4.9.armv7l.rpm [ 349s] skipping -debuginfo package [ 349s] compare /.build.oldpackages/libpcreposix-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.31-4.9.armv7l.rpm [ 350s] comparing rpmtags [ 350s] comparing RELEASE [ 350s] comparing PROVIDES [ 350s] comparing scripts [ 350s] comparing filelist [ 350s] comparing file checksum [ 350s] creating rename script [ 350s] RPM meta information is identical [ 350s] compare /.build.oldpackages/libpcreposix-debuginfo-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.31-4.9.armv7l.rpm [ 350s] skipping -debuginfo package [ 350s] compare /.build.oldpackages/pcre-debugsource-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.31-4.9.armv7l.rpm [ 351s] comparing rpmtags [ 351s] comparing RELEASE [ 351s] comparing PROVIDES [ 351s] comparing scripts [ 351s] comparing filelist [ 351s] comparing file checksum [ 351s] creating rename script [ 351s] RPM meta information is identical [ 351s] compare /.build.oldpackages/pcre-devel-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.31-4.9.armv7l.rpm [ 351s] comparing rpmtags [ 352s] comparing RELEASE [ 352s] comparing PROVIDES [ 352s] comparing scripts [ 352s] comparing filelist [ 352s] comparing file checksum [ 352s] creating rename script [ 352s] RPM meta information is identical [ 352s] compare /.build.oldpackages/pcre-devel-static-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.31-4.9.armv7l.rpm [ 352s] comparing rpmtags [ 352s] comparing RELEASE [ 352s] comparing PROVIDES [ 352s] comparing scripts [ 352s] comparing filelist [ 352s] comparing file checksum [ 352s] creating rename script [ 352s] RPM file checksum differs. [ 352s] Extracting packages [ 354s] RPM content is identical [ 354s] compare /.build.oldpackages/pcre-doc-8.31-4.8.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.31-4.9.noarch.rpm [ 355s] comparing rpmtags [ 355s] comparing RELEASE [ 355s] comparing PROVIDES [ 355s] comparing scripts [ 355s] comparing filelist [ 355s] comparing file checksum [ 355s] creating rename script [ 355s] RPM meta information is identical [ 355s] compare /.build.oldpackages/pcre-tools-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.31-4.9.armv7l.rpm [ 356s] comparing rpmtags [ 356s] comparing RELEASE [ 357s] comparing PROVIDES [ 357s] comparing scripts [ 357s] comparing filelist [ 357s] comparing file checksum [ 357s] creating rename script [ 357s] RPM file checksum differs. [ 357s] Extracting packages [ 357s] /usr/bin/pcregrep differs in assembler output [ 357s] --- /tmp/tmp.jwb9PuPQpL 2015-04-22 13:14:49.000000000 +0000 [ 357s] +++ /tmp/tmp.qy5PKdGRRq 2015-04-22 13:14:49.000000000 +0000 [ 357s] @@ -16,132 +16,132 @@ [ 357s] ldr lr, [pc, # ] ; <_init + ofs> [ 357s] add lr, pc, lr [ 357s] ldr pc, [lr, # ]! [ 357s] - .word 0x000150e4 [ 357s] + .word 0x000150d4 [ 357s] [ 357s] strcmp@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xe4 [ 357s] + ldr pc, [ip, # ]! ; 0xd4 [ 357s] [ 357s] fflush@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xdc [ 357s] + ldr pc, [ip, # ]! ; 0xcc [ 357s] [ 357s] pcre_maketables@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xd4 [ 357s] + ldr pc, [ip, # ]! ; 0xc4 [ 357s] [ 357s] memmove@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xcc [ 357s] + ldr pc, [ip, # ]! ; 0xbc [ 357s] [ 357s] free@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xc4 [ 357s] + ldr pc, [ip, # ]! ; 0xb4 [ 357s] [ 357s] fgets@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xbc [ 357s] + ldr pc, [ip, # ]! ; 0xac [ 357s] [ 357s] pcre_version@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xb4 [ 357s] + ldr pc, [ip, # ]! ; 0xa4 [ 357s] [ 357s] __stack_chk_fail@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xac [ 357s] + ldr pc, [ip, # ]! ; 0x9c [ 357s] [ 357s] pcre_exec@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0xa4 [ 357s] + ldr pc, [ip, # ]! ; 0x94 [ 357s] [ 357s] fwrite@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x9c [ 357s] + ldr pc, [ip, # ]! ; 0x8c [ 357s] [ 357s] fread@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x94 [ 357s] + ldr pc, [ip, # ]! ; 0x84 [ 357s] [ 357s] opendir@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x8c [ 357s] + ldr pc, [ip, # ]! ; 0x7c [ 357s] [ 357s] getenv@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x84 [ 357s] + ldr pc, [ip, # ]! ; 0x74 [ 357s] [ 357s] puts@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x7c [ 357s] + ldr pc, [ip, # ]! ; 0x6c [ 357s] [ 357s] malloc@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x74 [ 357s] + ldr pc, [ip, # ]! ; 0x64 [ 357s] [ 357s] __libc_start_main@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x6c [ 357s] + ldr pc, [ip, # ]! ; 0x5c [ 357s] [ 357s] strerror@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x64 [ 357s] + ldr pc, [ip, # ]! ; 0x54 [ 357s] [ 357s] __ctype_toupper_loc@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x5c [ 357s] + ldr pc, [ip, # ]! ; 0x4c [ 357s] [ 357s] pcre_config@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x54 [ 357s] + ldr pc, [ip, # ]! ; 0x44 [ 357s] [ 357s] __gmon_start__@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x4c [ 357s] + ldr pc, [ip, # ]! ; 0x3c [ 357s] [ 357s] __ctype_b_loc@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x44 [ 357s] + ldr pc, [ip, # ]! ; 0x34 [ 357s] [ 357s] exit@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x3c [ 357s] + ldr pc, [ip, # ]! ; 0x2c [ 357s] [ 357s] strlen@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x34 [ 357s] + ldr pc, [ip, # ]! ; 0x24 [ 357s] [ 357s] strchr@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x2c [ 357s] + ldr pc, [ip, # ]! [ 357s] [ 357s] pcre_compile@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! ; 0x24 [ 357s] + ldr pc, [ip, # ]! [ 357s] [ 357s] pcre_jit_stack_alloc@plt: [ 357s] add ip, pc, # , 12 [ 357s] @@ -155,115 +155,115 @@ [ 357s] [ 357s] __sprintf_chk@plt: [ 357s] add ip, pc, # , 12 [ 357s] - add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! [ 357s] + add ip, ip, # , 20 ; 0x14000 [ 357s] + ldr pc, [ip, # ]! ; 0xffc [ 357s] [ 357s] fgetc@plt: [ 357s] add ip, pc, # , 12 [ 357s] - add ip, ip, # ; 0x15000 [ 357s] - ldr pc, [ip, # ]! [ 357s] + add ip, ip, # , 20 ; 0x14000 [ 357s] + ldr pc, [ip, # ]! ; 0xff4 [ 357s] [ 357s] __printf_chk@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # , 20 ; 0x14000 [ 357s] - ldr pc, [ip, # ]! ; 0xffc [ 357s] + ldr pc, [ip, # ]! ; 0xfec [ 357s] [ 357s] fileno@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # , 20 ; 0x14000 [ 357s] - ldr pc, [ip, # ]! ; 0xff4 [ 357s] + ldr pc, [ip, # ]! ; 0xfe4 [ 357s] [ 357s] __fprintf_chk@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # , 20 ; 0x14000 [ 357s] - ldr pc, [ip, # ]! ; 0xfec [ 357s] + ldr pc, [ip, # ]! ; 0xfdc [ 357s] [ 357s] memchr@plt: [ 357s] add ip, pc, # , 12 [ 357s] add ip, ip, # , 20 ; 0x14000 [ 357s] - ldr pc, [ip, # ]! ; 0xfe4 [ 357s] + ldr pc, [ip, # ]! ; 0xfd4 [ 357s] compare /.build.oldpackages/pcre-tools-debuginfo-8.31-4.8.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.31-4.9.armv7l.rpm [ 358s] skipping -debuginfo package [ 358s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 358s] ... saving built statistics [ 358s] ... saving built packages [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/libpcre-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/libpcre-debuginfo-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/libpcrecpp-debuginfo-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/libpcreposix-debuginfo-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-debugsource-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-devel-static-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/armv7l/pcre-tools-debuginfo-8.31-4.9.armv7l.rpm [ 358s] /home/abuild/rpmbuild/RPMS/noarch/pcre-doc-8.31-4.9.noarch.rpm [ 358s] /home/abuild/rpmbuild/SRPMS/pcre-8.31-4.9.src.rpm [ 358s] /home/abuild/rpmbuild/OTHER/_statistics [ 359s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 359s] [ 359s] w27 finished "build pcre.spec" at Wed Apr 22 13:14:51 UTC 2015. [ 359s] [ 362s] [ 347.323511] SysRq : Power Off [ 362s] [ 347.432279] Power down. [ 364s] build: extracting built packages... [ 371s] libpcre-8.31-4.9.armv7l.rpm [ 371s] libpcre-debuginfo-8.31-4.9.armv7l.rpm [ 371s] libpcrecpp-8.31-4.9.armv7l.rpm [ 371s] libpcrecpp-debuginfo-8.31-4.9.armv7l.rpm [ 371s] libpcreposix-8.31-4.9.armv7l.rpm [ 371s] libpcreposix-debuginfo-8.31-4.9.armv7l.rpm [ 371s] pcre-debugsource-8.31-4.9.armv7l.rpm [ 371s] pcre-devel-8.31-4.9.armv7l.rpm [ 371s] pcre-devel-static-8.31-4.9.armv7l.rpm [ 371s] pcre-tools-8.31-4.9.armv7l.rpm [ 371s] pcre-tools-debuginfo-8.31-4.9.armv7l.rpm [ 371s] pcre-doc-8.31-4.9.noarch.rpm [ 371s] pcre-8.31-4.9.src.rpm [ 371s] _statistics [ 371s] rpmlint.log Retried build at Wed Apr 22 09:50:59 2015 returned same result, skipped