[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_1 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] obspw02 started "build _service:gbs:hal-backend-power-emulator.spec" at Fri Aug 5 13:17:28 UTC 2022. [ 1s] [ 1s] Building hal-backend-power-emulator for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '551180630f6b5150245d90f1017f7e74' [ 1s] [ 1s] processing recipe /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-power-emulator.spec ... [ 1s] running changelog2spec --target rpm --file /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-power-emulator.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_1/.build.rpmlist /var/cache/build/root_1/.build-srcdir/_service:gbs:hal-backend-power-emulator.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/1/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 2s] cycle: libsoftokn3 -> nss [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 3s] [16/41] preinstalling liblzma... [ 3s] [17/41] preinstalling libpopt... [ 3s] [18/41] preinstalling libreadline... [ 3s] [19/41] preinstalling libsmack... [ 3s] [20/41] preinstalling libsqlite... [ 3s] [21/41] preinstalling libuuid... [ 3s] [22/41] preinstalling libzstd1... [ 3s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 13s] [28/41] preinstalling coreutils... [ 13s] [29/41] preinstalling libacl... [ 13s] [30/41] preinstalling libelf... [ 13s] [31/41] preinstalling libmount... [ 13s] [32/41] preinstalling smack... [ 13s] [33/41] preinstalling bzip2... [ 13s] [34/41] preinstalling libmagic... [ 13s] [35/41] preinstalling libxml2... [ 13s] [36/41] preinstalling tar... [ 13s] [37/41] preinstalling util-linux... [ 13s] [38/41] preinstalling util-linux-su... [ 13s] [39/41] preinstalling nss... [ 14s] [40/41] preinstalling libsoftokn3... [ 14s] [41/41] preinstalling rpm... [ 14s] [ 14s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] running qemu-accel-x86_64-armv7l postinstall script [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 14s] reordering...cycle: gio-branding-upstream -> libgio [ 14s] breaking dependency libgio -> gio-branding-upstream [ 14s] cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 15s] [1/117] installing dlog-config-persistent-logs-7.0.4-130.11 [ 15s] [2/117] installing libmagic-data-5.41-6.344 [ 15s] [3/117] installing setup-0.9-6.18 [ 15s] warning: /etc/profile created as /etc/profile.rpmnew [ 15s] [4/117] installing filesystem-3.1-4.1 [ 15s] [5/117] installing glibc-2.30-17.1 [ 16s] [6/117] installing libatomic-9.2.0-16.28 [ 16s] [7/117] installing libgcc-9.2.0-16.28 [ 17s] [8/117] installing bash-3.2.57-5.1 [ 17s] [9/117] installing capi-base-common-0.4.71-56.2 [ 17s] [10/117] installing cpio-2.8-5.3 [ 17s] [11/117] installing diffutils-3.3-4.3 [ 17s] [12/117] installing findutils-4.3.8-5.412 [ 17s] [13/117] installing gdbm-1.8.3-3.715 [ 18s] [14/117] installing hostname-3.23-3.3 [ 18s] [15/117] installing libattr-2.5.1-5.403 [ 18s] [16/117] installing libblkid-2.37.4-12.19 [ 18s] [17/117] installing libbz2-1.0.8-5.276 [ 19s] [18/117] installing libcap-2.24-4.398 [ 19s] [19/117] installing libexpat-2.4.1-5.21 [ 20s] [20/117] installing libext2fs-1.46.0-4.57 [ 20s] [21/117] installing libffi-3.3-6.39 [ 20s] [22/117] installing libfreebl3-3.34.1-4.14 [ 21s] [23/117] installing libgfortran-9.2.0-16.28 [ 21s] [24/117] installing libgomp-9.2.0-16.28 [ 21s] [25/117] installing libitm-9.2.0-16.28 [ 22s] [26/117] installing libltdl-2.4.6-4.80 [ 22s] [27/117] installing liblua-5.1.5-3.356 [ 23s] [28/117] installing liblzma-5.2.5-5.334 [ 23s] [29/117] installing libopenssl11-1.1.1q-7.13 [ 23s] [30/117] installing libpcre-8.45-5.17 [ 24s] [31/117] installing libpopt-1.16-3.660 [ 24s] [32/117] installing libsmack-1.3.1-4.387 [ 25s] [33/117] installing libsmartcols-2.37.4-12.19 [ 25s] [34/117] installing libsqlite-3.39.0-6.3 [ 26s] [35/117] installing libstdc++-9.2.0-16.28 [ 26s] [36/117] installing libuuid-2.37.4-12.19 [ 26s] [37/117] installing libzstd1-1.4.5-2.235 [ 27s] [38/117] installing m4-1.4.19-4.2 [ 27s] [39/117] installing net-tools-2.0_20121208git-4.4 [ 27s] [40/117] installing nspr-4.12-3.653 [ 27s] [41/117] installing patch-2.7.6-10.32 [ 27s] [42/117] installing pkg-config-0.29.2-4.72 [ 27s] [43/117] installing sed-4.1c-4.2 [ 27s] [44/117] installing update-alternatives-1.20.5-3.4 [ 27s] [45/117] installing which-2.17-4.4 [ 27s] [46/117] installing zlib-1.2.11-3.693 [ 28s] [47/117] installing shadow-utils-4.1.4.2-3.68 [ 28s] [48/117] installing build-compare-2015.04.28-3.250 [ 28s] [49/117] installing libstdc++-devel-9.2.0-16.28 [ 28s] [50/117] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 32s] [51/117] installing terminfo-base-full-6.2-7.319 [ 33s] [52/117] installing cpp-9.2.0-16.28 [ 33s] [53/117] installing gcc-c++-9.2.0-16.28 [ 34s] [54/117] installing binutils-2.33.1-10.26 [ 35s] [55/117] installing coreutils-6.9-5.148 [ 35s] [56/117] installing gawk-3.1.5-4.4 [ 35s] [57/117] installing grep-2.5.2-3.4 [ 35s] [58/117] installing libacl-2.2.53-4.616 [ 35s] [59/117] installing libcap-tools-2.24-4.398 [ 35s] [60/117] installing libcc1-9.2.0-16.28 [ 36s] [61/117] installing libelf-0.178-5.11 [ 36s] [62/117] installing libglib-2.70.0-36.11 [ 37s] [63/117] installing libmount-2.37.4-12.19 [ 37s] [64/117] installing libubsan-9.2.0-16.28 [ 37s] [65/117] installing make-4.3-3.32 [ 38s] [66/117] installing nss-certs-3.34.1-4.14 [ 38s] [67/117] installing smack-1.3.1-4.387 [ 38s] [68/117] installing bzip2-1.0.8-5.276 [ 38s] [69/117] installing libfdisk-2.37.4-12.19 [ 38s] [70/117] installing libmagic-5.41-6.344 [ 39s] [71/117] installing libxml2-2.9.12-7.175 [ 39s] [72/117] installing perl-5.34.0-8.24 [ 42s] [73/117] installing xz-5.2.5-5.334 [ 42s] [74/117] installing dlog-7.0.4-130.11 [ 43s] [75/117] installing build-mkbaselibs-20120927-3.3 [ 43s] [76/117] installing linux-glibc-devel-3.10-4.522 [ 44s] [77/117] installing autoconf-2.71-6.88 [ 44s] [78/117] installing dlog-logger-7.0.4-130.11 [ 44s] [79/117] installing file-5.41-6.344 [ 44s] [80/117] installing glibc-locale-2.30-17.1 [ 45s] [81/117] installing libgmodule-2.70.0-36.11 [ 45s] [82/117] installing tar-1.17-3.4 [ 45s] [83/117] installing gzip-1.3.12-3.667 [ 45s] [84/117] installing libgobject-2.70.0-36.11 [ 46s] [85/117] installing libncurses6-6.2-7.319 [ 46s] [86/117] installing pam-1.1.6-4.2 [ 47s] [87/117] installing tzdata-2021e-5.1 [ 47s] [88/117] installing libdw-0.178-5.11 [ 48s] [89/117] installing security-config-1.0-168.1 [ 57s] groupadd: group 'dbus' already exists [ 57s] groupadd: group 'priv_appdebugging' already exists [ 57s] rm: cannot remove `/opt/share/security-config/test': No such file or directory [ 57s] cat: /etc/tizen-build.conf: No such file or directory [ 57s] [90/117] installing libarchive-3.5.2-5.24 [ 57s] [91/117] installing shared-mime-info-1.7-5.25 [ 62s] [92/117] installing gcc-9.2.0-16.28 [ 63s] [93/117] installing libncurses-6.2-7.319 [ 63s] [94/117] installing glibc-devel-2.30-17.1 [ 64s] [95/117] installing qemu-accel-x86_64-armv7l-0.4-10.13 [ 72s] [96/117] installing automake-1.16.4-6.77 [ 73s] [97/117] installing less-466-3.4 [ 73s] [98/117] installing libreadline-5.2-3.233 [ 73s] [99/117] installing procps-ng-3.3.17-4.1 [ 74s] [100/117] installing libasm-0.178-5.11 [ 74s] [101/117] installing build-20120927-3.3 [ 74s] [102/117] installing libdlog-7.0.4-130.11 [ 74s] [103/117] installing cmake-3.21.3-6.34 [ 76s] [104/117] installing libtool-2.4.6-4.80 [ 76s] [105/117] installing elfutils-0.178-5.11 [ 76s] [106/117] installing util-linux-2.37.4-12.19 [ 76s] [107/117] installing util-linux-su-2.37.4-12.19 [ 76s] [108/117] installing nss-3.34.1-4.14 [ 76s] [109/117] installing libgio-2.70.0-36.11 [ 77s] [110/117] installing gio-branding-upstream-2.70.0-36.11 [ 77s] [111/117] installing hal-api-common-0.0.1-36.2 [ 77s] [112/117] installing libsoftokn3-3.34.1-4.14 [ 77s] [113/117] installing rpm-4.14.1.1-9.152 [ 78s] [114/117] installing hal-api-common-devel-0.0.1-36.2 [ 78s] [115/117] installing hal-api-power-0.0.1-11.1 [ 78s] [116/117] installing rpm-build-4.14.1.1-9.152 [ 78s] [117/117] installing hal-api-power-devel-0.0.1-11.1 [ 78s] removing nis flags from /var/cache/build/root_1/etc/nsswitch.conf... [ 78s] now finalizing build dir... [ 79s] Running build time source services... [ 80s] build target is armv7l-tizen-linux [ 80s] ----------------------------------------------------------------- [ 80s] I have the following modifications for hal-backend-power-emulator.spec: [ 80s] 8c8 [ 80s] < Release: %{release} [ 80s] --- [ 80s] > Release: 2.1 [ 80s] ----------------------------------------------------------------- [ 80s] ----- building hal-backend-power-emulator.spec (user abuild) [ 80s] ----------------------------------------------------------------- [ 80s] ----------------------------------------------------------------- [ 80s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/551180630f6b5150245d90f1017f7e74-hal-backend-power-emulator' -ba /home/abuild/rpmbuild/SOURCES/hal-backend-power-emulator.spec [ 80s] Building target platforms: armv7l-tizen-linux [ 80s] Building for target armv7l-tizen-linux [ 80s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.JyUuwY [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + rm -rf hal-backend-power-emulator-1.1.0 [ 80s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/hal-backend-power-emulator-1.1.0.tar.gz [ 80s] + /bin/tar -xof - [ 80s] + STATUS=0 [ 80s] + '[' 0 -ne 0 ']' [ 80s] + cd hal-backend-power-emulator-1.1.0 [ 80s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 80s] + cp /home/abuild/rpmbuild/SOURCES/hal-backend-power-emulator.manifest . [ 80s] + exit 0 [ 80s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zNI2r0 [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd hal-backend-power-emulator-1.1.0 [ 80s] ++ uname -m [ 80s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + LDFLAGS= [ 80s] + export LDFLAGS [ 80s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_HAL_LIBDIR_PREFIX=/hal/lib -DCMAKE_HAL_LICENSEDIR_PREFIX=/hal/share/licenses [ 80s] CMake Deprecation Warning at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): [ 80s] Compatibility with CMake < 2.8.12 will be removed from a future version of [ 80s] CMake. [ 80s] [ 80s] Update the VERSION argument value or use a ... suffix to tell [ 80s] CMake that the project does not need compatibility with older versions. [ 80s] [ 80s] [ 80s] -- The C compiler identification is GNU 9.2.0 [ 80s] -- Detecting C compiler ABI info [ 80s] -- Detecting C compiler ABI info - done [ 80s] -- Check for working C compiler: /bin/cc - skipped [ 80s] -- Detecting C compile features [ 80s] -- Detecting C compile features - done [ 80s] -- Found PkgConfig: /bin/pkg-config (found version "0.29.2") [ 81s] -- Checking for modules 'hal-api-common;hal-api-power' [ 81s] -- Found hal-api-common, version 0.1.0 [ 81s] -- Found hal-api-power, version 0.1.0 [ 81s] -- Configuring done [ 82s] -- Generating done [ 82s] CMake Warning: [ 82s] Manually-specified variables were not used by the project: [ 82s] [ 82s] CMAKE_INSTALL_LIBDIR [ 82s] INCLUDE_INSTALL_DIR [ 82s] LIB_INSTALL_DIR [ 82s] SHARE_INSTALL_PREFIX [ 82s] SYSCONF_INSTALL_DIR [ 82s] [ 82s] [ 82s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 [ 82s] + make -j8 [ 82s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 -B/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 --check-build-system CMakeFiles/Makefile.cmake 0 [ 82s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0//CMakeFiles/progress.marks [ 82s] make -f CMakeFiles/Makefile2 all [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/depend [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] cd /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/CMakeFiles/hal-backend-power.dir/DependInfo.cmake --color= [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/build [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] [ 33%] Building C object CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o [ 82s] /bin/cc -Dhal_backend_power_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/hal -fPIC -MD -MT CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o -MF CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o.d -o CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/src/hal-backend-power.c [ 82s] [ 66%] Building C object CMakeFiles/hal-backend-power.dir/src/sysfs.c.o [ 82s] /bin/cc -Dhal_backend_power_EXPORTS -I/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/include -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/hal -fPIC -MD -MT CMakeFiles/hal-backend-power.dir/src/sysfs.c.o -MF CMakeFiles/hal-backend-power.dir/src/sysfs.c.o.d -o CMakeFiles/hal-backend-power.dir/src/sysfs.c.o -c /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/src/sysfs.c [ 82s] [100%] Linking C shared library libhal-backend-power.so [ 82s] /usr/bin/cmake -E cmake_link_script CMakeFiles/hal-backend-power.dir/link.txt --verbose=1 [ 82s] /bin/cc -fPIC -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I/usr/include/hal -shared -Wl,-soname,libhal-backend-power.so -o libhal-backend-power.so CMakeFiles/hal-backend-power.dir/src/hal-backend-power.c.o CMakeFiles/hal-backend-power.dir/src/sysfs.c.o -L/usr/lib/hal -lhal-api-power -lhal-api-common -ldl [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] [100%] Built target hal-backend-power [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/CMakeFiles 0 [ 82s] + exit 0 [ 82s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.x1Zw9Z [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd hal-backend-power-emulator-1.1.0 [ 82s] + LANG=C [ 82s] + export LANG [ 82s] + unset DISPLAY [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm [ 82s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm [ 82s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm [ 82s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm install [ 82s] /usr/bin/cmake -S/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 -B/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 --check-build-system CMakeFiles/Makefile.cmake 0 [ 82s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/CMakeFiles /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0//CMakeFiles/progress.marks [ 82s] /bin/make -f CMakeFiles/Makefile2 all [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] /bin/make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/depend [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] cd /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/CMakeFiles/hal-backend-power.dir/DependInfo.cmake --color= [ 82s] Consolidate compiler generated dependencies of target hal-backend-power [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] /bin/make -f CMakeFiles/hal-backend-power.dir/build.make CMakeFiles/hal-backend-power.dir/build [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] make[2]: Nothing to be done for 'CMakeFiles/hal-backend-power.dir/build'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] [100%] Built target hal-backend-power [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/CMakeFiles 0 [ 82s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] make[1]: Nothing to be done for 'preinstall'. [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0' [ 82s] Install the project... [ 82s] /usr/bin/cmake -P cmake_install.cmake [ 82s] -- Install configuration: "" [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/etc/pass/pass.json [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/etc/pass/pass-cpu0.json [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/etc/pass/pass-dummy.json [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/etc/pass/pass-memory.json [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/lib/tmpfiles.d/pass-hal.conf [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/share/licenses/hal-backend-power-emulator/LICENSE [ 82s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/lib/libhal-backend-power.so [ 82s] + rm -f /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/usr/share/info/dir [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm -regex '.*\.la$' [ 82s] + xargs rm -f -- [ 82s] + find /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm -regex '.*\.a$' [ 82s] + xargs rm -f -- [ 82s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 1.1.0-2.1 --unique-debug-src-base hal-backend-power-emulator-1.1.0-2.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0 [ 82s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm/hal/lib/libhal-backend-power.so [ 82s] 31 blocks [ 83s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/hal-backend-power-emulator-debuginfo.manifest [ 83s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/hal-backend-power-emulator-1.1.0/hal-backend-power-emulator-debugsource.manifest [ 83s] + /usr/lib/rpm/check-buildroot [ 83s] + /usr/lib/rpm//brp-compress [ 83s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 83s] + /usr/lib/rpm/brp-python-hardlink [ 83s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm [ 83s] Processing files: hal-backend-power-emulator-1.1.0-2.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 83s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 83s] [ 83s] Provides: config(hal-backend-power-emulator) = 1.1.0-2.1 hal-backend-power-emulator = 1.1.0-2.1 hal-backend-power-emulator(armv7l-32) = 1.1.0-2.1 libhal-backend-power.so [ 83s] Requires(interp): /bin/sh /bin/sh [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires(post): /bin/sh /bin/systemctl /sbin/ldconfig security-config [ 83s] Requires(postun): /bin/sh /bin/systemctl /sbin/ldconfig [ 83s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 83s] Processing files: hal-backend-power-emulator-debugsource-1.1.0-2.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Provides: hal-backend-power-emulator-debugsource = 1.1.0-2.1 hal-backend-power-emulator-debugsource(armv7l-32) = 1.1.0-2.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Processing files: hal-backend-power-emulator-debuginfo-1.1.0-2.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Provides: hal-backend-power-emulator-debuginfo = 1.1.0-2.1 hal-backend-power-emulator-debuginfo(armv7l-32) = 1.1.0-2.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Recommends: hal-backend-power-emulator-debugsource(armv7l-32) = 1.1.0-2.1 [ 83s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm [ 83s] Wrote: /home/abuild/rpmbuild/SRPMS/hal-backend-power-emulator-1.1.0-2.1.src.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-power-emulator-1.1.0-2.1.armv7l.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-power-emulator-debugsource-1.1.0-2.1.armv7l.rpm [ 83s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-power-emulator-debuginfo-1.1.0-2.1.armv7l.rpm [ 83s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.t77WOY [ 83s] + umask 022 [ 83s] + cd /home/abuild/rpmbuild/BUILD [ 83s] + cd hal-backend-power-emulator-1.1.0 [ 83s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/hal-backend-power-emulator-1.1.0-2.1.arm [ 83s] + exit 0 [ 83s] ... checking for files with abuild user/group [ 83s] ... creating baselibs [ 84s] ... comparing built packages with the former built [ 84s] /usr/lib/build/pkg-diff.sh [ 84s] compare /.build.oldpackages/hal-backend-power-emulator-1.1.0-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/hal-backend-power-emulator-1.1.0-2.1.src.rpm [ 84s] This is not a prerelease project. Compare the project name. [ 84s] comparing rpmtags [ 84s] comparing RELEASE [ 84s] comparing PROVIDES [ 84s] comparing scripts [ 84s] comparing filelist [ 84s] comparing file checksum [ 84s] RPM meta information is identical [ 84s] compare /.build.oldpackages/hal-backend-power-emulator-1.1.0-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-power-emulator-1.1.0-2.1.armv7l.rpm [ 85s] Comparing hal-backend-power-emulator-1.1.0-1.1.armv7l.rpm to hal-backend-power-emulator-1.1.0-2.1.armv7l.rpm [ 85s] This is not a prerelease project. Compare the project name. [ 85s] comparing rpmtags [ 85s] --- /tmp/tmp.pDcuv43200/tmp.ZeruG43218 2022-08-05 13:18:52.347241881 +0000 [ 85s] +++ /tmp/tmp.pDcuv43200/tmp.IpHEO43220 2022-08-05 13:18:52.355241634 +0000 [ 85s] @@ -8,4 +8,4 @@ [ 85s] cpio xz 5T [ 85s] [ 85s] (none) (none) (none) [ 85s] -obs://build.tizen.org/Tizen:Unified/standard/ae03fb847f448e57553bbee0cdd2e4fa-hal-backend-power-emulator Tizen:Unified [ 85s] +obs://build.tizen.org/Tizen:Unified/standard/551180630f6b5150245d90f1017f7e74-hal-backend-power-emulator Tizen:Unified [ 85s] RPM meta information is different [ 85s] compare /.build.oldpackages/hal-backend-power-emulator-debuginfo-1.1.0-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-power-emulator-debuginfo-1.1.0-2.1.armv7l.rpm [ 85s] skipping -debuginfo package [ 85s] compare /.build.oldpackages/hal-backend-power-emulator-debugsource-1.1.0-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/hal-backend-power-emulator-debugsource-1.1.0-2.1.armv7l.rpm [ 85s] Comparing hal-backend-power-emulator-debugsource-1.1.0-1.1.armv7l.rpm to hal-backend-power-emulator-debugsource-1.1.0-2.1.armv7l.rpm [ 85s] This is not a prerelease project. Compare the project name. [ 85s] comparing rpmtags [ 85s] --- /tmp/tmp.iWYiW43243/tmp.zgkKk43264 2022-08-05 13:18:52.767228913 +0000 [ 85s] +++ /tmp/tmp.iWYiW43243/tmp.eljBb43266 2022-08-05 13:18:52.779228542 +0000 [ 85s] @@ -10,4 +10,4 @@ [ 85s] cpio xz 5T [ 85s] [ 85s] (none) (none) (none) [ 85s] -obs://build.tizen.org/Tizen:Unified/standard/ae03fb847f448e57553bbee0cdd2e4fa-hal-backend-power-emulator Tizen:Unified [ 85s] +obs://build.tizen.org/Tizen:Unified/standard/551180630f6b5150245d90f1017f7e74-hal-backend-power-emulator Tizen:Unified [ 85s] RPM meta information is different [ 85s] [ 85s] obspw02 finished "build hal-backend-power-emulator.spec" at Fri Aug 5 13:18:52 UTC 2022. [ 85s] Retried build at Fri Aug 5 13:48:49 2022 returned same result, skipped Retried build at Wed Aug 24 04:26:41 2022 returned same result, skipped Retried build at Mon Aug 29 04:36:59 2022 returned same result, skipped Retried build at Tue Aug 30 03:29:07 2022 returned same result, skipped