[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/var/cache/build/root_7 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] obsnw01 started "build _service:gbs:perl-XML-Simple.spec" at Wed Jul 27 00:54:07 UTC 2022. [ 0s] [ 0s] Building perl-XML-Simple for project 'Tizen:Unified' repository 'standard' arch 'armv7l' srcmd5 '498521687415970975dd8174e26b9da9' [ 0s] [ 0s] processing recipe /var/cache/build/root_7/.build-srcdir/_service:gbs:perl-XML-Simple.spec ... [ 0s] running changelog2spec --target rpm --file /var/cache/build/root_7/.build-srcdir/_service:gbs:perl-XML-Simple.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /var/cache/build/root_7/.build.rpmlist /var/cache/build/root_7/.build-srcdir/_service:gbs:perl-XML-Simple.spec build rpmlint-Factory ... [ 1s] copying qemu [ 1s] /usr/bin/qemu-arm-binfmt /usr/bin/qemu-arm-static /usr/bin/qemu-arm64-binfmt /usr/bin/qemu-arm64-static /usr/sbin/qemu-binfmt-conf.sh [ 1s] [ 1s] registering binfmt handlers for cross build [ 1s] write: Invalid argument [ 1s] /proc/sys/fs/binfmt_misc/register: write failed [ 1s] /var/run/obs/worker/7/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P [ 1s] [ 1s] /.build/qemu-reg: No such file or directory [ 1s] /.build/qemu-reg: failed. Trying alternate binfmt file [ 1s] /usr/lib/build/qemu-reg: No such file or directory [ 1s] /usr/lib/build/qemu-reg: binfmt registration failed [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 12s] [28/41] preinstalling coreutils... [ 12s] [29/41] preinstalling libacl... [ 12s] [30/41] preinstalling libelf... [ 12s] [31/41] preinstalling libmount... [ 12s] [32/41] preinstalling smack... [ 12s] [33/41] preinstalling bzip2... [ 12s] [34/41] preinstalling libmagic... [ 12s] [35/41] preinstalling libxml2... [ 12s] [36/41] preinstalling tar... [ 12s] [37/41] preinstalling util-linux... [ 12s] [38/41] preinstalling util-linux-su... [ 12s] [39/41] preinstalling nss... [ 12s] [40/41] preinstalling libsoftokn3... [ 12s] [41/41] preinstalling rpm... [ 13s] [ 13s] running qemu-linux-user-x86_64-cross postinstall script [ 13s] running qemu-accel-x86_64-armv7l postinstall script [ 13s] running setup postinstall script [ 13s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 13s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 13s] initializing rpm db... [ 13s] reordering...cycle: libsoftokn3 -> nss [ 13s] breaking dependency nss -> libsoftokn3 [ 13s] done [ 14s] [1/98] installing libmagic-data-5.41-6.341 [ 14s] [2/98] installing setup-0.9-6.16 [ 14s] warning: /etc/profile created as /etc/profile.rpmnew [ 14s] [3/98] installing filesystem-3.1-4.1 [ 14s] [4/98] installing glibc-2.30-16.3 [ 14s] [5/98] installing libatomic-9.2.0-16.25 [ 15s] [6/98] installing libgcc-9.2.0-16.25 [ 15s] [7/98] installing bash-3.2.57-5.1 [ 15s] [8/98] installing cpio-2.8-5.3 [ 15s] [9/98] installing diffutils-3.3-4.3 [ 15s] [10/98] installing findutils-4.3.8-5.409 [ 15s] [11/98] installing gdbm-1.8.3-3.712 [ 16s] [12/98] installing hostname-3.23-3.3 [ 16s] [13/98] installing libattr-2.5.1-5.400 [ 16s] [14/98] installing libblkid-2.37.4-12.16 [ 16s] [15/98] installing libbz2-1.0.8-5.273 [ 17s] [16/98] installing libcap-2.24-4.395 [ 17s] [17/98] installing libexpat-2.4.1-5.18 [ 18s] [18/98] installing libext2fs-1.46.0-4.54 [ 18s] [19/98] installing libfreebl3-3.34.1-4.11 [ 18s] [20/98] installing libgfortran-9.2.0-16.25 [ 19s] [21/98] installing libgomp-9.2.0-16.25 [ 19s] [22/98] installing libitm-9.2.0-16.25 [ 19s] [23/98] installing libltdl-2.4.6-4.77 [ 20s] [24/98] installing liblua-5.1.5-3.353 [ 20s] [25/98] installing liblzma-5.2.5-5.331 [ 20s] [26/98] installing libopenssl11-1.1.1q-7.10 [ 21s] [27/98] installing libpcre-8.45-5.15 [ 21s] [28/98] installing libpopt-1.16-3.657 [ 21s] [29/98] installing libsmack-1.3.1-4.384 [ 22s] [30/98] installing libsmartcols-2.37.4-12.16 [ 22s] [31/98] installing libsqlite-3.37.2-5.72 [ 22s] [32/98] installing libstdc++-9.2.0-16.25 [ 23s] [33/98] installing libuuid-2.37.4-12.16 [ 23s] [34/98] installing libzstd1-1.4.5-2.232 [ 23s] [35/98] installing m4-1.4.19-4.2 [ 24s] [36/98] installing net-tools-2.0_20121208git-4.4 [ 24s] [37/98] installing nspr-4.12-3.650 [ 24s] [38/98] installing patch-2.7.6-10.29 [ 24s] [39/98] installing pkg-config-0.29.2-4.69 [ 24s] [40/98] installing sed-4.1c-4.2 [ 24s] [41/98] installing update-alternatives-1.20.5-3.4 [ 24s] [42/98] installing which-2.17-4.4 [ 24s] [43/98] installing zlib-1.2.11-3.690 [ 25s] [44/98] installing build-compare-2015.04.28-3.247 [ 25s] [45/98] installing libstdc++-devel-9.2.0-16.25 [ 26s] [46/98] installing qemu-linux-user-x86_64-cross-5.2.0-1.1 [ 30s] [47/98] installing terminfo-base-full-6.2-7.316 [ 31s] [48/98] installing cpp-9.2.0-16.25 [ 31s] [49/98] installing gcc-c++-9.2.0-16.25 [ 32s] [50/98] installing binutils-2.33.1-10.23 [ 33s] [51/98] installing coreutils-6.9-5.145 [ 33s] [52/98] installing gawk-3.1.5-4.4 [ 33s] [53/98] installing grep-2.5.2-3.4 [ 33s] [54/98] installing libacl-2.2.53-4.613 [ 34s] [55/98] installing libcc1-9.2.0-16.25 [ 34s] [56/98] installing libelf-0.178-5.8 [ 34s] [57/98] installing libmount-2.37.4-12.16 [ 35s] [58/98] installing libubsan-9.2.0-16.25 [ 35s] [59/98] installing make-4.3-3.29 [ 35s] [60/98] installing nss-certs-3.34.1-4.11 [ 35s] [61/98] installing perl-XML-Parser-2.41-3.5 [ 36s] [62/98] installing smack-1.3.1-4.384 [ 36s] [63/98] installing bzip2-1.0.8-5.273 [ 36s] [64/98] installing libfdisk-2.37.4-12.16 [ 36s] [65/98] installing libmagic-5.41-6.341 [ 37s] [66/98] installing libxml2-2.9.12-7.172 [ 37s] [67/98] installing perl-5.34.0-8.21 [ 40s] [68/98] installing xz-5.2.5-5.331 [ 40s] [69/98] installing build-mkbaselibs-20120927-3.3 [ 40s] [70/98] installing linux-glibc-devel-3.10-4.519 [ 41s] [71/98] installing autoconf-2.71-6.85 [ 41s] [72/98] installing file-5.41-6.341 [ 41s] [73/98] installing glibc-locale-2.30-16.3 [ 42s] [74/98] installing tar-1.17-3.4 [ 42s] [75/98] installing gzip-1.3.12-3.664 [ 42s] [76/98] installing libncurses6-6.2-7.316 [ 42s] [77/98] installing pam-1.1.6-4.2 [ 42s] [78/98] installing tzdata-2021e-5.1 [ 43s] [79/98] installing libdw-0.178-5.8 [ 43s] [80/98] installing libarchive-3.5.2-5.21 [ 44s] [81/98] installing gcc-9.2.0-16.25 [ 44s] [82/98] installing libncurses-6.2-7.316 [ 44s] [83/98] installing glibc-devel-2.30-16.3 [ 44s] [84/98] installing qemu-accel-x86_64-armv7l-0.4-10.11 [ 53s] [85/98] installing automake-1.16.4-6.74 [ 53s] [86/98] installing less-466-3.4 [ 53s] [87/98] installing libreadline-5.2-3.230 [ 54s] [88/98] installing procps-ng-3.3.17-4.1 [ 55s] [89/98] installing libasm-0.178-5.8 [ 55s] [90/98] installing build-20120927-3.3 [ 55s] [91/98] installing libtool-2.4.6-4.77 [ 55s] [92/98] installing elfutils-0.178-5.8 [ 55s] [93/98] installing util-linux-2.37.4-12.16 [ 55s] [94/98] installing util-linux-su-2.37.4-12.16 [ 55s] [95/98] installing nss-3.34.1-4.11 [ 56s] [96/98] installing libsoftokn3-3.34.1-4.11 [ 56s] [97/98] installing rpm-4.14.1.1-9.148 [ 57s] [98/98] installing rpm-build-4.14.1.1-9.148 [ 57s] removing nis flags from /var/cache/build/root_7/etc/nsswitch.conf... [ 57s] now finalizing build dir... [ 57s] Running build time source services... [ 58s] build target is armv7l-tizen-linux [ 58s] ----------------------------------------------------------------- [ 58s] I have the following modifications for perl-XML-Simple.spec: [ 58s] 4c4 [ 58s] < Release: 0 [ 58s] --- [ 58s] > Release: 4.2 [ 58s] ----------------------------------------------------------------- [ 58s] ----- building perl-XML-Simple.spec (user abuild) [ 58s] ----------------------------------------------------------------- [ 58s] ----------------------------------------------------------------- [ 58s] + exec rpmbuild --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:Unified/standard/498521687415970975dd8174e26b9da9-perl-XML-Simple' -ba /home/abuild/rpmbuild/SOURCES/perl-XML-Simple.spec [ 60s] Building target platforms: armv7l-tizen-linux [ 60s] Building for target armv7l-tizen-linux [ 60s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ywWMfE [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + rm -rf XML-Simple-2.25 [ 60s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/XML-Simple-2.25.tar.gz [ 60s] + /bin/tar -xof - [ 60s] + STATUS=0 [ 60s] + '[' 0 -ne 0 ']' [ 60s] + cd XML-Simple-2.25 [ 60s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 60s] + cp /home/abuild/rpmbuild/SOURCES/perl-XML-Simple.manifest . [ 60s] + exit 0 [ 60s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.1fCQJD [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd XML-Simple-2.25 [ 60s] ++ uname -m [ 60s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 60s] + LANG=C [ 60s] + export LANG [ 60s] + unset DISPLAY [ 60s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 60s] + export CFLAGS [ 60s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 60s] + export CXXFLAGS [ 60s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 60s] + export FFLAGS [ 60s] + LDFLAGS= [ 60s] + export LDFLAGS [ 60s] + perl Makefile.PL [ 61s] Warning: prerequisite XML::NamespaceSupport 1.04 not found. [ 61s] Warning: prerequisite XML::SAX 0.15 not found. [ 61s] Warning: prerequisite XML::SAX::Expat 0 not found. [ 61s] Checking if your kit is complete... [ 61s] Looks good [ 62s] Generating a Unix-style Makefile [ 62s] Writing Makefile for XML::Simple [ 62s] Writing MYMETA.yml and MYMETA.json [ 62s] + /bin/make [ 65s] cp lib/XML/Simple.pm blib/lib/XML/Simple.pm [ 65s] cp lib/XML/Simple/FAQ.pod blib/lib/XML/Simple/FAQ.pod [ 66s] Manifying 2 pod documents [ 66s] + exit 0 [ 66s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.zgUG5D [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd XML-Simple-2.25 [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm [ 66s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm install_vendor [ 67s] Manifying 2 pod documents [ 67s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/XML/Simple.pm [ 67s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/XML/Simple/FAQ.pod [ 67s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/man/man3/XML::Simple.3 [ 67s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/man/man3/XML::Simple::FAQ.3 [ 67s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 68s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 68s] + xargs -0 -r rm [ 68s] + '[' armv7l == noarch ']' [ 68s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/info [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/doc/packages [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/doc/perl-XML-Simple [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/doc/perl-XML-Simple-2.25 [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/gtk-doc [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/doc [ 68s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/man [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm -regex '.*/man/man./.*.[0-9]' [ 68s] + xargs rm -f -- [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm -regex '.*/man/../man./.*.[0-9]' [ 68s] + xargs rm -f -- [ 68s] + find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 68s] + xargs rm -f -- [ 68s] + FILES=perl-XML-Simple.files [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0 -maxdepth 1 -type f [ 68s] + RES= [ 68s] + '[' -n '' ']' [ 68s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ -type d [ 68s] ++ sort [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] + continue [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/XML = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/XML [ 68s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 68s] + el=XML [ 68s] + all_dir=(${all_dir[@]} $el) [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/XML/Simple = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/XML/Simple [ 68s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 68s] + el=XML/Simple [ 68s] + all_dir=(${all_dir[@]} $el) [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 68s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 68s] + el=armv7l-linux-thread-multi [ 68s] + all_dir=(${all_dir[@]} $el) [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 68s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 68s] + el=armv7l-linux-thread-multi/auto [ 68s] + all_dir=(${all_dir[@]} $el) [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML [ 68s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 68s] + el=armv7l-linux-thread-multi/auto/XML [ 68s] + all_dir=(${all_dir[@]} $el) [ 68s] + for dir in '`find ${base_dir} -type d | sort`' [ 68s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML/Simple = /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 68s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML/Simple [ 68s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 68s] + el=armv7l-linux-thread-multi/auto/XML/Simple [ 68s] + all_dir=(${all_dir[@]} $el) [ 68s] + for i in '${all_dir[@]}' [ 68s] + '[' XML = auto ']' [ 68s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/XML = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML ']' [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML -maxdepth 1 -type f [ 68s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple.pm [ 68s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple.pm ']' [ 68s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/XML [ 68s] + /bin/cat [ 68s] + for file in '$RES' [ 68s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple.pm [ 68s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/XML/Simple.pm [ 68s] + /bin/cat [ 68s] + for i in '${all_dir[@]}' [ 68s] + '[' XML/Simple = auto ']' [ 68s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/XML/Simple = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple ']' [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple -maxdepth 1 -type f [ 68s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple/FAQ.pod [ 68s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple/FAQ.pod ']' [ 68s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/XML/Simple [ 68s] + /bin/cat [ 68s] + for file in '$RES' [ 68s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//XML/Simple/FAQ.pod [ 68s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/XML/Simple/FAQ.pod [ 68s] + /bin/cat [ 68s] + for i in '${all_dir[@]}' [ 68s] + '[' armv7l-linux-thread-multi = auto ']' [ 68s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi ']' [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 68s] + RES= [ 68s] + '[' -n '' ']' [ 68s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 68s] + /bin/cat [ 68s] + for i in '${all_dir[@]}' [ 68s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 68s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 68s] + continue [ 68s] + for i in '${all_dir[@]}' [ 68s] + '[' armv7l-linux-thread-multi/auto/XML = auto ']' [ 68s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/XML ']' [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/XML -maxdepth 1 -type f [ 68s] + RES= [ 68s] + '[' -n '' ']' [ 68s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML [ 68s] + /bin/cat [ 68s] + for i in '${all_dir[@]}' [ 68s] + '[' armv7l-linux-thread-multi/auto/XML/Simple = auto ']' [ 68s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML/Simple = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/XML/Simple ']' [ 68s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/XML/Simple -maxdepth 1 -type f [ 68s] + RES= [ 68s] + '[' -n '' ']' [ 68s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/XML/Simple [ 68s] + /bin/cat [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/man ']' [ 68s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/var/adm/perl-modules/perl-XML-Simple ']' [ 68s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/bin ']' [ 68s] + /usr/lib/rpm/find-debuginfo.sh -j4 --build-id-seed 2.25-4.2 --unique-debug-src-base perl-XML-Simple-2.25-4.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/XML-Simple-2.25 [ 68s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/XML-Simple-2.25/perl-XML-Simple-debuginfo.manifest [ 68s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/XML-Simple-2.25/perl-XML-Simple-debugsource.manifest [ 68s] + /usr/lib/rpm/check-buildroot [ 68s] + /usr/lib/rpm//brp-compress [ 68s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 68s] + /usr/lib/rpm/brp-python-hardlink [ 68s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm [ 68s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.ti67dB [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd XML-Simple-2.25 [ 68s] + /bin/make test [ 68s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t [ 70s] # # Package Version [ 70s] # perl 5.34.0 [ 70s] # XML::Simple 2.25 [ 70s] # Storable 3.23 [ 70s] # XML::Parser 2.41 (default parser) [ 70s] # XML::SAX Not Installed [ 70s] t/0_Config.t ............. ok [ 71s] t/1_XMLin.t .............. ok [ 73s] t/2_XMLout.t ............. ok [ 80s] t/3_Storable.t ........... ok [ 83s] t/4_MemShare.t ........... ok [ 85s] t/5_MemCopy.t ............ ok [ 86s] t/6_ObjIntf.t ............ ok [ 87s] t/7_SaxStuff.t ........... skipped: no XML::SAX [ 87s] t/8_Namespaces.t ......... skipped: no XML::SAX [ 88s] t/9_Strict.t ............. ok [ 89s] t/A_XMLParser.t .......... ok [ 89s] t/author-pod-syntax.t .... skipped: these tests are for testing by the author [ 90s] t/B_Hooks.t .............. ok [ 91s] t/C_External_Entities.t .. ok [ 91s] All tests successful. [ 91s] Files=14, Tests=481, 22 wallclock secs ( 0.41 usr 0.03 sys + 11.70 cusr 0.26 csys = 12.40 CPU) [ 91s] Result: PASS [ 91s] + exit 0 [ 91s] Processing files: perl-XML-Simple-2.25-4.2.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.hBtNuB [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd XML-Simple-2.25 [ 91s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/licenses/perl-XML-Simple [ 91s] + export LC_ALL=C [ 91s] + LC_ALL=C [ 91s] + export LICENSEDIR [ 91s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/licenses/perl-XML-Simple [ 91s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm/usr/share/licenses/perl-XML-Simple [ 91s] + exit 0 [ 91s] Provides: perl(XML::Simple) = 2.25 perl-XML-Simple = 2.25-4.2 perl-XML-Simple(armv7l-32) = 2.25-4.2 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Processing files: perl-XML-Simple-debugsource-2.25-4.2.armv7l [ 91s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/XML-Simple-2.25/debugsourcefiles.list [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-XML-Simple-2.25-4.2.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Simple-2.25-4.2.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-XML-Simple-debugsource-2.25-4.2.armv7l.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.03XDUA [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd XML-Simple-2.25 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-XML-Simple-2.25-4.2.arm [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 92s] [ 92s] obsnw01 finished "build perl-XML-Simple.spec" at Wed Jul 27 00:55:39 UTC 2022. [ 92s] Retried build at Wed Jul 27 07:43:14 2022 returned same result, skipped Retried build at Wed Aug 3 08:52:44 2022 returned same result, skipped Retried build at Mon Aug 29 03:50:09 2022 returned same result, skipped